341400103 概述
Thumbwheel Switches 指轮开关 指轮/按动滚轮开关
341400103 规格参数
是否Rohs认证: | 符合 | 生命周期: | Transferred |
包装说明: | ROHS COMPLIANT | Reach Compliance Code: | compliant |
ECCN代码: | EAR99 | HTS代码: | 8536.50.70.00 |
风险等级: | 5.27 | Is Samacsys: | N |
主体宽度: | 28.96 mm | 主体高度: | 33.02 mm |
主体长度或直径: | 42.52 mm | 触点(交流)最大额定R负载: | .1A@120VAC |
最大触点电流(交流): | 0.1 A | 最大触点电流(直流): | 0.1 A |
触点(直流)最大额定R负载: | .1A@28VDC | 最大触点电压(交流): | 120 V |
最大触点电压(直流): | 28 V | 电气寿命: | 100000 Cycle(s) |
安装特点: | PANEL MOUNT | 位置数: | 10 |
开关段数量: | 4 | 最高工作温度: | 65 °C |
最低工作温度: | -10 °C | 密封: | SEALED CONTACT AND DUST PROOF |
表面贴装: | NO | 开关功能: | RESISTOR DECADE |
开关类型: | THUMB/PUSHWHEEL SWITCH | 端接类型: | SOLDER |
Base Number Matches: | 1 |
341400103 数据手册
通过下载341400103数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载C&K 3 Series
Thumbwheel Switches
Features/Benefits
Typical Applications
• Most complete product offering in the industry • Test & measurement equipment
• Spacers available to fit most panel cutouts
• Front or rear mounting options
• Industrial equipment
• Computer devices
Specifications
Materials
CONTACT RATING:
HOUSING: ABS plastic.
CARRY: 1 AMP continuous.
SWITCH: 100 mA max.
THUMBWHEEL: ABS plastic.
ROTOR CONTACTS: Precious metal on copper alloy.
OPERATING VOLTAGE: 50 mV to 28 V DC or 120 V AC.
ELECTRICAL LIFE: 100,000 actuations.
STATOR CONTACTS: Hard gold over nickel over copper
on epoxy fiberglass.
CONTACT RESISTANCE: Below 100 m Ω typ. initial @
NOTE: Specifications and materials listed above are for switches with standard options
For information on specific and custom switches, consult Customer Service Center.
2-4 V DC, 100 mA.
9
INSULATION RESISTANCE: 10 Ω min.
* Note: All models listed are RoHS compliant. See Technical Data section of this catalog for
RoHS compliant and compatible definitions and specifications.
DIELECTRIC STRENGTH: 500 Vrms min. @ sea level
between common terminal and any output.
OPERATING TEMPERATURE: -10ºC to 65ºC.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages N–9 thru N–12. For additional options not shown in catalog, consult Customer Service Center.
Consult factory for illumination availability.
Series
3
Thumbwheel switch
Number of Sections
0
1
2
3
4
5
6
7
8
9
Switch section
1 Switch section
2 Switch sections
3 Switch sections
4 Switch sections
5 Switch sections
6 Switch sections
7 Switch sections
8 Switch sections
More than 8
Function Code
11 Decimal, SP, 10 position
14 Resistor decade
21 BCD, 10 position
23 Complement of BCD, 10 position
27 BCD, 10 position
Mounting Style
00 Snap-in, front mount
09 Snap-in, front mount*
10 Rear mount
19 Rear mount*
20 Rear mount
29 Rear mount*
Terminations
31 BCD, 10 position
71 BCH, 16 position
0
Type 0
1
Type 1, extended type 0
Solder pins with .100” spacing**
Solder pins with .156” spacing**
Any combination
N
P
9
switch sections
Color/Marking/Stops
*X9 mounting styles must be ordered with ‘0’ number of sections.
N
0
Matte black body, gloss
black wheel,
Seal
white marking
0
1
2
3
No seal
Sealed contacts
Dust lens
Sealed contacts & dust lens
** Note: Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant).
Termination option P (RoHS compliant) replaced termination option B (Non-RoHS compliant).
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–8
C&K 3 Series
Thumbwheel Switches
SERIES
3
THUMBWHEEL SWITCHES
NUMBER OF SECTIONS
0
Switch section only, no assembly. Blank bodies are considered sections; endplates are not sections.
Must be ordered with 09 or 19 mounting style options, see pages N–10 and N–11.
1-8 Number of switch sections in assembly, includes endplates.
9
More than 8 switch sections, specify on CONFIGURATION FORM, page N–15 and consult Customer Service Center.
NOTE: Endplates and blank sections available separately, see pages N–13 and N–14.
FUNCTION CODE
11 DECIMAL–1 POLE; 10 POSITION
14 RESISTOR DECADE; 1-2-2-2-2 CODE
21 BCD 1-2-4-8; 10 POSITION
(RESISTORS NOT SUPPLIED)
N
Available Terminations: 0, 1, N
See fig. 1, page N-12.
Available Terminations: 0, 1, N
Available Terminations: 1
See fig. 1, page N-12.
See fig. 1, page N-12.
NOTE: For terminal location diagram, see page N-12.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–9
C&K 3 Series
Thumbwheel Switches
FUNCTION CODE
23 COMPLEMENT OF BCD 1-2-4-8;
27 BCD 1-2-4-8; 10 POSITION
31 BCD 1-2-4-8; 10 POSITION
71 BINARY CODED HEXADECIMAL,
10 POSITION
16 POSITION
Available Terminations: P
See fig. 2, page N-12.
Available Terminations: 0, 1, N
See fig. 1, page N-12.
Available Terminations: 0, 1, N
See fig. 1, page N-12.
Available Terminations: 0, 1, N
See fig. 1, page N-12.
NOTE: For terminal location diagram, see page N–12.
MOUNTING STYLE
Type 0 Snap-In Front Mount
PANEL MOUNTING
MOUNTING
STYLE
DIM. ‘A’
(.315 x N) + .326
(8,00 x N) + (8,28)
00
N = Number of sections.
Recommended panel thickness:
0.46-.125
(1,16-3,18)
00 SWITCH ASSEMBLY W/ ENDPLATES–.315 (8,00) SECTION PITCH
N = Number of sections.
N
09 SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS
(Must be ordered with number of sections option “0”, see Page N–9.)
NOTE: Endplates, blank sections, spacers
and assembly hardware available separately, see pages N–13 and N–14.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–10
C&K 3 Series
Thumbwheel Switches
MOUNTING STYLE
PANEL MOUNTING
Type 1 Rear Mount
MOUNTING
STYLE
DIM. ‘A’
DIM. ‘B’
Mtg. Holes
(.350 x N) + .340
(8,89 x N) + (8,64)
(.350 x N) + .560
(8,89 x N) + (14,22)
10
N = Number of sections.
Recommended panel thickness:
0.46-.125
(1,16-3,18)
10 SWITCH ASSEMBLY W/ ENDPLATES–.350 (8,89) SECTION PITCH
N = Number of sections.
19 SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS
(Must be ordered with number of sections option “0”, see Page N–9.)
Type 2 Rear Mount
20 SWITCH ASSEMBLY W/ ENDPLATES–.350 (8,89) SECTION PITCH
N = Number of sections.
29 SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS
(Must be ordered with number of sections option “0”, see Page N–9.)
N
NOTE: Endplates, blank sections, spacers and
assembly hardware available separately, see pages N–13 and N–14.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–11
C&K 3 Series
Thumbwheel Switches
TERMINATIONS
1
TYPE 1, EXTENDED TYPE 0
N
SOLDER PINS WITH .100” SPACING
0
TYPE 0
Signal traces cut except for common(s).
9
ANY COMBINATION OF TERMINATION
CONFIGURATIONS OR SPECIAL TERMINATIONS.
P
SOLDER PINS WITH .156” SPACING
Specify on configuration form, page N–15
and consult Customer Service Center.
PC Board 1/32" (0,79) thick.
NOTE: All terminal holes shown may not be present for all function codes, consult Customer Service Center.
Terminal connector available for termination options 0 & 1, see page N–14.
NOTE: Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant).
Termination option P (RoHS compliant) replaced termination option B (Non-RoHS compliant).
Terminal Location Numbers
FIG. 1
FIG. 2
NOTE: See function codes, pages N–9 and N–10, for signal locations.
COLOR/MARKING/STOPS
0
MATTE BLACK HOUSING (Gloss black wheel with white characters; no stops.)
NOTE: Stop pins are available separately, see page N–14.
SEAL
N
0
1
UNSEALED SWITCHING CONTACTS.
SEALED SWITCHING CONTACTS. (Sealing is by means of an o-ring rotary seal and a cured-in-place elastomer gasket.
Switching contact area is protected from moisture, oil, and airborne contaminants.)
2
3
DUST LENS. (Protects the character face of the wheel from abrasion and dirt).
SEALED SWITCHING CONTACTS AND DUST LENS
Dust Lens
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–12
C&K 3 Series
Thumbwheel Switches
AVAILABLE HARDWARE
Blank sections, Type 0,
.315 THK.
Blank sections, Front mount, Type 0,
.315 THK.
Blank sections, Rear mount, Type 1,
.350 THK.
4006
4008
PART NO.
PART NO.
PART NO.
413602000 W/RIB-BLACK
413502000 PLAIN-BLACK
400602000 W/RIB-BLACK
400502000 W/RIB & W/OUT SPRINGS-BLACK
400702000 PLAIN & W/OUT SPRINGS-BLACK
400802000 PLAIN-BLACK
Blank sections, Rear mount, Type 2,
.350 THK.
End plates, Front mount, Type 0
End plates, Rear mount, Type 1
4734
4733
PART NO.
473402000 W/RIB-BLACK
PART NO.
PART NO.
413402000 BLACK
400402000 BLACK
473302000 PLAIN-BLACK
Two required for
complete assembly.
Two required for
complete assembly.
End plates, Rear mount, Type 2
Spacers, Front mount, Type 0 & 3, .078 THK.
(Makes section pitch 10mm)
Stop pins
N
PART NO.
PART NO.
PART NO.
473202000 BLACK
410802000 BLACK
402900000
Two required for
complete assembly.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–13
C&K 3 Series
Thumbwheel Switches
AVAILABLE HARDWARE
Terminal connector
605A00000
605A02000
PART NO.
605A00000 PC
605A02000 SOLDER LUG
Fits 0 & 1 terminations only.
Screws for field assembly of thumbwheel switches
(2 screws needed per assembly + 403500000 nuts)
NUMBER OF SECTIONS IN ASSEMBLY
FRONT MOUNTING
MTG. STYLE – 00
REAR MOUNTING
MTG. STYLE – 10
SCREW PART NUMBER
(0-80 UNF THD. SIZE)
412700000
412701000
412702000
1–2
3–4
5–7
1–2
3
4–6
Nut
Nut driver (For 403500000 nut)
Two nuts required per assembly and screws.
PART NO.
PART NO.
403500000
406100652
N
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–14
C&K 3 Series
Thumbwheel Switches
Configuration Form
GRAY SHADED AREAS TO BE FILLED IN BY CUSTOMER SERVICE.
C&K PART NUMBER
CATALOG PART NO.
3
CUSTOMER
PRINT
COMPANY NAME
REVISION:
ADDRESS
TEL.#
DETAILS:
CUSTOMER CONTACT
ORIGINATED BY
DATE
SALES REP.
DESCRIBE IN APPROPRIATE ROW
THUMBWHEEL
SECTIONS
NO.
OF
SEC.
FUNCTION CODE – TERMINATIONS–
COLOR/MARKING/STOPS/SEAL –
ILLUMINATION
ENTER OPTION CODES IN APPROPRIATE BOXES. FUNCTION
CODES INCLUDE BLANK SECTIONS (SEE PAGES M-9 & M-10).
3 –
3 –
3 –
3 –
3 –
3 –
3 –
3 –
3 –
3 –
3 –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
1
2
3
4
5
6
7
8
9
10
11
QUALITY CONTROL INSTRUCTIONS
PRODUCTION APPROVAL
DATE
Q.C. APPROVAL
DATE
DATE
N
REV.
INITIALS
FOR SWITCHES WITH MORE THAN 11 SECTIONS, CONTINUE ON ADDITIONAL SHEETS.
SPECIAL INSTRUCTIONS OR SPECIFICATIONS:
SHEET _____ OF _____
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–15
341400103 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
341400N00 | ITT | Thumbwheel Switches | 获取价格 | |
341400N01 | ITT | Thumbwheel Switches | 获取价格 | |
341400N02 | ITT | Thumbwheel Switches | 获取价格 | |
341400N03 | ITT | Thumbwheel Switches | 获取价格 | |
341409000 | ITT | Thumbwheel Switches | 获取价格 | |
341409001 | ITT | Thumbwheel Switches | 获取价格 | |
341409002 | ITT | Thumbwheel Switches | 获取价格 | |
341409003 | ITT | Thumbwheel Switches | 获取价格 | |
341409100 | ITT | Thumbwheel Switches | 获取价格 | |
341409101 | ITT | Thumbwheel Switches | 获取价格 |
341400103 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6