3P4213P02 [ITT]
Thumb/Pushwheel Switch, 4 Switches, Binary Coded Decimal, 10 Positions, 0.1A, 28VDC, Solder Terminal, Panel Mount, ROHS COMPLIANT;型号: | 3P4213P02 |
厂家: | ITT Cannon |
描述: | Thumb/Pushwheel Switch, 4 Switches, Binary Coded Decimal, 10 Positions, 0.1A, 28VDC, Solder Terminal, Panel Mount, ROHS COMPLIANT 开关 |
文件: | 总6页 (文件大小:395K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
C&K 3P Series
Miniature Pushwheel Switches
Features/Benefits
Typical Applications
• Snap-in front mount design for
• Test & measurement equipment
• Industrial machinery
easy assembly
• 10 position models available
• Computer peripherals
Specifications
Materials
CONTACT RATING:
HOUSING: Polycarbonate (UL 94V-0).
CARRY: 1 AMP continuous.
SWITCH: 0.4 VA max., 100 mA max., 28 V DC max.
PUSHWHEEL: Polycarbonate (UL 94V-0).
PUSHBUTTON: Polycarbonate (UL 94V-0).
ROTOR CONTACTS: Gold over nickel over copper alloy.
OPERATING VOLTAGE: 50 mV to 28 V DC.
ELECTRICAL LIFE: 100,000 actuations.
STATOR CONTACTS: Hard gold over nickel over copper
on epoxy fiberglass.
CONTACT RESISTANCE: Below 300 m Ω typ. @
2-4 V DC, 100 mA.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
9
INSULATION RESISTANCE: 10 Ω min. (dry).
DIELECTRIC STRENGTH: 500 Vrms min. @ sea level
between common terminal and any output.
Note: All models listed are RoHS compliant. See Technical Data section of this catalog for
RoHS compliant and compatible definitions and specifications.
OPERATING TEMPERATURE: –10ºC to 65ºC.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages N-17 thru N-19. For additional options not shown in catalog, consult Customer Service Center.
Consult factory for illumination availability.
Series
3P Miniature pushwheel
Number of Sections
0
1
2
3
4
Switch section
1 Switch section
2 Switch sections
3 Switch sections
4 Switch sections
Function Code
21 BCD 1-2-4-8
23 Complement of BCD 1-2-4-8
Mounting Style
0
3
Snap-in, front mount
Snap-in, front mount
Terminations
0
1
Short PCB
Extended PCB
N
P
9
Short PCB with solder pins* (.100” spacing)
Extended PCB with solder pins* (.200” spacing)
Any combination
N
Color/Marking/Stops
0
Matte black housing, gloss black wheel,
white marking, black pushbutton
* Note: Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant).
Termination option P (RoHS compliant) replaced termination option A (Non-RoHS compliant).
Dust Lens
0
2
No Iens
Dust lens
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–16
C&K 3P Series
Miniature Pushwheel Switches
SERIES
3P MINIATURE PUSHWHEEL SWITCH
N = Number of sections.
NUMBER OF SECTIONS
0
Switch section only, no endplates.
1-4 Number of switch sections in assembly, includes endplates.
NOTE: Endplates and blank sections available separately, see page N-20.
FUNCTION CODE
21 BCD 1-2-4-8, 10 POSITION
23 COMPLEMENT OF BCD 1-2-4-8,
10 POSITION
N
Available Terminations: P, 0, 1, N
See figs. 2 & 3, page N-19.
Available Terminations: 0, 1, N
See figs. 2 & 3, page N-19.
NOTE: For terminal location diagrams, see page N-19.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–17
C&K 3P Series
Miniature Pushwheel Switches
MOUNTING STYLE
0
SNAP-IN FRONT MOUNT,
SECTION PITCH: .300 (7,62) EACH SECTION
N = Number of sections.
Recommended panel thickness:
.039-.156
(0,99-3,95)
3
SNAP-IN FRONT MOUNT WITH SPACER,
SECTION PITCH: .400 (70,16) EACH SECTION, LAST SECTION .300 (7,62)
N = Number of sections.
Recommended panel thickness:
.039-.156
(0,99-3,95)
TERMINATIONS
1
EXTENDED PCB WITH PROVISION
FOR COMPONENTS
N
SHORT PCB, TYPE 0 WITH SOLDER PINS
0
SHORT PCB
For terminal location numbers, see next page.
Signal traces cut, except for common(s).
P
EXTENDED PCB, TYPE 1 WITH
SOLDER PINS
9
ANY COMBINATION OF TERMINATION
CONFIGURATIONS OR SPECIAL TERMINATIONS
Specify on configuration form, page N-21
and consult Customer Service Center.
N
For terminal location numbers, see next page.
Signal traces cut, except for common(s).
** Note: Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant).
Termination option P (RoHS compliant) replaced termination option A (Non-RoHS compliant).
PC Board 1/32" (0,79) thick.
NOTE: All terminal holes shown may not be present for all function codes,
consult Customer Service Center.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–18
C&K 3P Series
Miniature Pushwheel Switches
TERMINATIONS
Terminal Location Numbers
Solder Pins
Fig. 1
Fig. 2
COLOR/MARKING/STOPS
0
MATTE BLACK HOUSING (Gloss black wheel with white characters, black pushbuttons, no stops.)
DUST LENS
0
2
NO LENS
DUST LENS (Protects character face of the wheel from abrasion and dust.)
N
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–19
C&K 3P Series
Miniature Pushwheel Switches
AVAILABLE HARDWARE
Blank sections, .300 THK.
End plates
Spacers, .100 THK.
(Makes section pitch .400)
LEFT-with hole
RIGHT-with pin
PART NO.
623502000 LEFT-BLACK
PART NO.
Stop pins
PART NO.
One left and one right
piece required for
complee assembly.
663602000 BLACK
623602000 RIGHT-BLACK
Terminal connnector
PART NO.
PART NO.
Fits 0, 1
terminations only.
657800000
630000000
N
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–20
C&K 3P Series
Miniature Pushwheel Switches
Configuration Form
GRAY SHADED AREAS TO BE FILLED IN BY CUSTOMER SERVICE.
C&K PART NUMBER
CATALOG PART NO.
3 P
CUSTOMER
PRINT
COMPANY NAME
REVISION:
ADDRESS
TEL.#
DETAILS:
CUSTOMER CONTACT
ORIGINATED BY
DATE
SALES REP.
DESCRIBE IN APPROPRIATE ROW
PUSHWHEEL
SECTIONS
NO.
OF
SEC.
FUNCTION CODE – TERMINATIONS–
COLOR/MARKING/STOPS/SEAL –
ILLUMINATION
ENTER OPTION CODES IN APPROPRIATE BOXES. FUNCTION
CODES INCLUDE BLANK SECTIONS (SEE PAGE M-17).
3 P –
3 P –
3 P –
3 P –
3 P –
3 P –
3 P –
3 P –
3 P –
3 P –
3 P –
–
–
–
–
–
–
–
–
–
–
–
1
2
3
4
5
6
7
8
9
10
11
QUALITY CONTROL INSTRUCTIONS
PRODUCTION APPROVAL
DATE
Q.C. APPROVAL
DATE
DATE
N
REV.
INITIALS
FOR SWITCHES WITH MORE THAN 11 SECTIONS, CONTINUE ON ADDITIONAL SHEETS.
SPECIAL INSTRUCTIONS OR SPECIFICATIONS:
SHEET _____ OF _____
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
N–21
相关型号:
3P4230000
Thumb/Pushwheel Switch, 4 Switches, BCD Complement, 10 Positions, 0.1A, 28VDC, Solder Terminal, Panel Mount, ROHS COMPLIANT
ITT
3P4230002
Thumb/Pushwheel Switch, 4 Switches, BCD Complement, 10 Positions, 0.1A, 28VDC, Solder Terminal, Panel Mount, ROHS COMPLIANT
ITT
3P4230100
Thumb/Pushwheel Switch, 4 Switches, BCD Complement, 10 Positions, 0.1A, 28VDC, Solder Terminal, Panel Mount, ROHS COMPLIANT
ITT
3P4230102
Thumb/Pushwheel Switch, 4 Switches, BCD Complement, 10 Positions, 0.1A, 28VDC, Solder Terminal, Panel Mount, ROHS COMPLIANT
ITT
3P4230300
Thumb/Pushwheel Switch, 4 Switches, BCD Complement, 10 Positions, 0.1A, 28VDC, Solder Terminal, Panel Mount,
ITT
3P4230302
Thumb/Pushwheel Switch, 4 Switches, BCD Complement, 10 Positions, 0.1A, 28VDC, Solder Terminal, Panel Mount,
ITT
©2020 ICPDF网 联系我们和版权申明