65-9SB-500000 [ITT]
Interconnection Device;型号: | 65-9SB-500000 |
厂家: | ITT Cannon |
描述: | Interconnection Device |
文件: | 总3页 (文件大小:765K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TM
Cannon 50 Ohm Connectors
SEALFLEX
Sealflex 2 microwave cable assemblies are designed for
applications requiring consistent microwave performance
through to 18 GHz and may be used with minimal
degradation to 26 GHz with SMA connectors.
All connector designs exhibit “mode free” characteristics to 18
GHz, thereby allowing low VSWR to be specified without
“spikes” being present in the upper frequency spectrum.
Key Features
Each assembly is 100% tested for VSWR and insertion loss
and test plots are supplied with each item.
•
Fully flexible cable
- Does not require detailed drawing
(unlike semi-rigid)
Triple screens (90 dB RF shielding)
DC to 26 GHz frequency range
100% electrically tested
Sealflex 2 assemblies have been adopted for use in various
avionic systems, missiles, military ground and shipborne
applications as well as commercial communications
equipment.
•
•
•
- VSWR and insertion loss plots supplied
SPECIFICATIONS
ELECTRICAL
50Ω nominal
Impedance
1.25 (2 - 12.4 GHz) 1.35 (12.4 - 18 GHz)
See graph on next page
-90 dB
Voltage Standing Wave Ratio (VSWR)
Attenuation
Shielding RF
MECHANICAL
137 N (30.9 lbs) minimum
1.7 Nm (15 in. lbs) minimum
Connector Retention
Connector / Cable Torque
Minimum Bend Radii
Cable Diameter
3,18 (.125)
4,57 (.180)
6,35 (.250)
Static
Flexing
13,00 (.511)
19,00 (.748)
25,00 (.984)
25,00 (.984)
38,00 (1.496)
51,00 (2.007)
ENVIRONMENTAL
Operating Temperature
Moisture Resistance
Vibration
-65˚ C to 165˚ C
MIL-STD-202, Method 106
MIL-STD-202, Method 204(C)
MIL-E-5272, Para. 4.15.5.1
MIL-STD-202, Method 107(C)
MIL-STD-202, Method 101(B)
Shock
Thermal Shock
Corrosion
Solvent Resistance
7 days at 200˚ C, JP6 (MIL-J-2658) and hydraulic fluid (MIL-H-5806)
NOTES: Tighter specifications are subject to special quotation.
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
37
TM
Cannon 50 Ohm Connectors
SEALFLEX
Attenuation
6
5
4
3
Ø3,18
(.125)
Ø4,57
(.180)
2
Ø6,35
(.250)
1
0.9
0.8
0.7
LOSS
dB/M
0.6
0.5
MISMATCH LOSS
PER CONNECTOR PAIR
0.4
0.3
0.2
0.1
1
2
3
4
5
6
7
8
9 10
20
30
40 50 60 7080 90
FREQUENCY (GHz)
Cable Maximum Frequency (f ):
c
ø 3,18 (.125) = 65.3 GHz
(single mode operation)
ø 4,57 (.180) = 36.8 GHz
ø 6,35 (.250) = 23.7 GHz
Typical Return Loss (VSWR) Part Number 065-9AA-1000000
5;1
10
2,0;1
1,8;1
1,5;1
1,3;1
1,2;1
20
30
40
1,15;1
1,1;1
RETURN
LOSS
(dB)
1,05;1
1,02;1
V.S.W.R.
50
2
FREQUENCY (GHz)
18
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
38
TM
Cannon 50 Ohm Connectors
SEALFLEX
MICROWAVE CABLE ASSEMBLIES
Length
to interface on straight connectors
to centerline on right angle connectors
to front of flange on bulkhead connectors
Standard Tolerances
Length up to 1 m (39.370)
1 m (39.370) to 3 m (118.00)
-0 + 10,00 (.393)
-0 + 20,00 (.787)
3 m (118.00) to 15 m (1771.65) -0 + 30,00 (1.181)
ORDERING INFORMATION
This table shows how the part numbers for coaxial connectors are constructed.
TYPICAL PART NUMBER 065 - 9 X X - XXXX 0
0
0
Microwave Cable Assem bly
Connector 1 Code
A
B
C
D
S
SMA Plug
SMA Right Angle Plug
SMA Bulkhead Jack, ‘D’ Hole
SMA Bulkhead Jack, 4 Hole Flange
N Plug
Connector 2 Code
A
B
C
D
S
SMA Plug
SMA Right Angle Plug
SMA Bulkhead Jack, ‘D’ Hole
SMA Bulkhead Jack, 4 Hole Flange
N Plug
Length (m m )
300 300,00 (11.81)
500 500,00 (19.685)
700 700,00 (29.528)
1000 1000,00 (39.370)
1500 1500,00 (59.055)
2000 2000,00 (78.740)
3000 3000,00 (118.110)
Cable Size Code
0
1
2
4,57 (.180)
3,18 (.125)
6,35 (.250)
Standard
0
standard
Standard
0
standard
Example: 065-9AS-1000000 = Sealfex 2 cable assembly; 4,57 (.180) with 1 SMA plug and 1 N plug on 1 metre length of cable
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
39
相关型号:
©2020 ICPDF网 联系我们和版权申明