7107J21WPI11
更新时间：2024-10-30 04:43:32
品牌：ITT
描述：Toggle Switch, SPDT, Latched And Momentary, 0.02A, 20VDC, Wire Wrap Terminal, Lever Actuator, Panel Mount, ROHS COMPLIANT
概述
数据手册7107J21WPI11 概述
Toggle Switch, SPDT, Latched And Momentary, 0.02A, 20VDC, Wire Wrap Terminal, Lever Actuator, Panel Mount, ROHS COMPLIANT
7107J21WPI11 数据手册
通过下载7107J21WPI11数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载C&K 7000 Series
Miniature Rocker & Lever Handle Switches
Features/Benefits
Typical Applications
• Telecommunications
• Instrumentation
• Multi-pole and multi-position
• Wide variety of actuator and
termination options
• Medical equipment
• Epoxy terminal-seal compatible
with bottom wash cleaning
• RoHS compliant
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page H-21 for additional ratings.
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Nylon, black.
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
FRAME (FRONT MOUNT): Nylon, black.
FRAME (REAR MOUNT): Spring steel, black.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4
V DC, 100 mA, for both silver and gold plated contacts.
9
INSULATION RESISTANCE: 10 Ω min.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
END CONTACTS: B contact material: Copper alloy, with gold plate over
nickel plate. Q contact material: Coin silver, silver plated. See page
H-21 for additional contact materials.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page H-21 for additional contact materials.
NOTE: Any models supplied with S, P, R, Q, B or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical
Data Section
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless
steel. Standoff: Nylon standard.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages H-4 through H-25 . For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
7101 SP On-None-On
7103 SP On-Off-On
Contact Material
Actuator
J1 .531 long rocker
J2 Lever
B
K
P
Q
Gold
Gold, tin-lead
Gold, matte tin
Silver
Terminations
7105 SP Mom.-Off-Mom.
7107 SP On-Off-Mom.
7108 SP On-None-Mom.
7109 SP None-On-Mom.
7201 DP On-None-On
7203 DP On-Off-On
7205 DP Mom.-Off-Mom.
7207 DP On-Off-Mom.
7208 DP On-None-Mom.
7211 DP On-On-On
7213 DP On-On-Mom.
7215 DP Mom.-On-Mom.
7301 3P On-None-On
7303 3P On-Off-On
7401 4P On-None-On
7405 4P Mom.-Off-Mom.
7411 4P On-On-On
A
Right angle, PC thru-hole
J3 .906" long rocker
J8 .699" long rocker
J10 1.318" long rocker
J11 Rocker with frame
J15 Rocker, snap-in
J16 Rocker with frame, snap-in
J19 Rocker with frame
J21 Lever with frame
J25 Lever, snap-in
J26 Lever with frame, snap-in
J37 Rocker with frame
J50 Rocker
J51 Rocker with frame
J52 Rocker with frame for
LED, snap-in
AV2 Vertical right angle, PC thru-hole
M Silver, tin-lead
C
Z
PC Thru-hole
Solder lug
S
G
L
Silver, matte-tin
Gold over silver
Gold over silver, tin-lead
Gold over silver, matte-tin
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle,
snap-in, PC thru-hole
AW3 Right angle, extended, PC thru-hole
V2 .555" high, V-bracket
V3 .460" high, V-bracket
V4 .630" high, V-bracket
V5 Vertical right angle, PC thru-hole
V6 .460" high, V-bracket
V7 .630" high, V-bracket
R
Seal
E
I
Epoxy
Epoxy potted base
Actuator Color
Frame Color
Black
NONE No frame color required
White
2
1
3
Black
White
Red
2
V8 .953" high, V-bracket
1
V9 1.150" high, V-bracket
V31 .460" high, V-bracket, snap-in
V51 Vertical right angle, snap-in
V61 .460" high, V-bracket, snap-in
Metal Frame Color
(J11, J19, J21 &
J37 Actuators)
J60 Lever
Note: UL/CSA models
available, see pages H-5
and H-6.
J61 Lever with frame, snap-in
J62 Lever with frame for
LED, snap-in
J90 Lever
J91 Lever with frame, snap-in
2
Black
W
.750" long, wire wrap
1
White
W3 .425" long, wire wrap
W5 1.305" long,wire wrap
Z3 Quick connect
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–4
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 2 POS. 3
CONNECTED TERMINALS
POS. 1
POS. 1
POS. 2
POS. 3
UL/CSA**
MODEL
NO.
NO.
POLES
C&K marking on opposite side
C&K marking on opposite side
N/A
MODEL NO.
SCHEMATIC
7101
U11
ON
ON
NONE
OFF
ON
7103
7105
7107
7108
7109
U13
U15
U17
U18
U19
ON
MOM.
ON
OFF
MOM.
MOM.
MOM.
MOM.
2-3
OPEN
2-1
2-1
SP
OFF
ON
NONE
ON
N/A
2-3
SPDT
NONE
N/A
SPDT
Terminal Nos.
For Reference Only
Part number shown: 7101J1ZQE2
7201
7203
7205
U21
ON
ON
NONE
OFF
OFF
OFF
NONE
ON
ON
N/A
U23
ON
U25
MOM.
ON
MOM.
MOM.
MOM.
ON
OPEN
7207
U27
2-3,5-6
2-1,5-4
DP
7208
U28
ON
N/A
7211*
7213*
7215*
U211*
U213*
U215*
ON
ON
ON
MOM.
MOM.
2-3,5-4
DPDT
MOM.
ON
DPDT
Terminal Nos.
For Reference Only
Part number shown: 7201J1ZQE2
MOM. = Momentary
* Wiring for 3-way switch, see Section O.
** U11 through U413 model nos.
with all options when ordered with G, L, M or Q contact material.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–5
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
SWITCH FUNCTION
SWITCH FUNCTION
CONNECTED TERMINALS
POS. 2
POS. 1
POS. 2
POS. 3
POS. 1
POS. 3
UL/CSA**
MODEL
NO.
NO.
POLES
MODEL NO.
C&K marking on opposite side
C&K marking on opposite side
N/A
SCHEMATIC
7301
7303
U31
U33
ON
ON
NONE
OFF
ON
ON
3P
2-3,5-6,8-9
2-1,5-4,8-7
OPEN
3PDT
3PDT
Part number shown: 7301J1ZQE2
Terminal Nos.
For Reference Only
N/A
7401
U41
ON
MOM.
ON
NONE
OFF
ON
ON
MOM.
ON
4P
7405
U45
2-3,5-6,8-9,11-12
2-1,5-4,8-7,11-10
OPEN
7411*
U411*
2-3,5-4,8-9,11-10
4PDT
4PDT
Part number shown: 7401J1ZQE2
Terminal Nos.
For Reference Only
MOM. = Momentary
* Wiring for 3-way switch: See Technical Data section of this
catalog for RoHS compliant and compatible definitions and
specifications.
** U11 through U411 model nos.
with all options when ordered with G, L, M or Q contact material.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–6
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PANEL REAR MOUNT
ACTUATOR
J1 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
1
3
BLACK
WHITE
RED
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch thick
panel are supplied standard on all switches with
panel mounting brackets. Actuators available
separately, see page H-22. Hardware is available
see Technical Data section of this catalog.
J2 LEVER
J1, J2, J3, J8 & J10 Actuators available with
C, W-W5, Z or Z3 terminations.
PANEL MOUNTING
J1 & J2 Actuators
J3 ROCKER
DIMPLES MFG.
OPTION
J3 Actuator
J8 ROCKER
J8 Actuator
J10 ROCKER
DIMPLES
MFG. OPTION
J10 Actuator
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–7
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–SNAP-IN FRONT MOUNT
ACTUATOR
FRAME COLOR
J15 ROCKER, SNAP-IN
OPTION
CODE
ACTUATOR
COLOR
2
1
3
BLACK
WHITE
RED
No frame color choice required
OPTION
CODE
FRAME COLOR
BLACK
J16 ROCKER WITH FRAME, SNAP-IN
2
No Frame Color
(J15 or J25options)
NONE
1
WHITE
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Actuators & frames available
separately, see pages H-22 and H-25. J15,
J16, J25, J26, J50 & J51 Actuators available
with 71XX, 72XX, U1XX & U2XX models
and C, W-W5, Z and Z3 terminations.
J25 LEVER, SNAP-IN
PANEL MOUNTING
J15, J16, J25 & J26 Actuators
No frame color choice required
J26 LEVER WITH FRAME, SNAP-IN
J50 Actuator
*
J50 ROCKER, SNAP-IN
* For J50: Increase this dimension to .620/.625
(15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
No frame color choice required
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–8
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–SNAP-IN FRONT MOUNT
ACTUATOR
FRAME COLOR
J51 ROCKER WITH FRAME, SNAP-IN
OPTION
CODE
ACTUATOR
COLOR
2
1
3
BLACK
WHITE
RED
OPTION
CODE
J52 ROCKER WITH FRAME FOR LED, SNAP-IN
FRAME COLOR
BLACK
2
NONE
1
No Frame Color
(J15 or J25 options)
WHITE
Finish: Matte. Other colors, custom actuator
markings and legends available, consult Customer
Service Center.
NOTE: Actuators & frames available separately, see
pages H-22 and H-25. J51, J52, J60 & J61 Actuators
available with 71XX, 72XX, U1XX & U2XX models
and C, W-W5, Z and Z3 terminations.
LED not included.
For LED information, see page H-24.
J60 LEVER, SNAP-IN
PANEL MOUNTING
J51, J60 & J61 Actuators
*
No frame color choice required
J52 Actuator
*
J61 LEVER WITH FRAME, SNAP-IN
For J51, J52: Increase this dimension to .620/.625
(15,75/15,88) for .060/.125(1,52/3,18) thk. panels.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–9
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–SNAP-IN FRONT MOUNT
ACTUATOR
FRAME COLOR
J62 LEVER WITH FRAME FOR LED, SNAP-IN
OPTION
CODE
ACTUATOR
COLOR
2
1
3
BLACK
WHITE
RED
OPTION
CODE
FRAME COLOR
BLACK
2
NONE
1
No Frame Color
(J90 options)
LED not included.
For LED information, see page H-25.
WHITE
J90 LEVER, SNAP-IN
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Actuators & frames available separately,
see pages H-22 and H-25. J62, J90 & J91
Actuators available with 71XX, 72XX, U1XX &
U2XX models and C, W-W5, Z & Z3 terminations.
PANEL MOUNTING
J62 Actuator
*
No frame color choice required.
J91 LEVER WITH FRAME, SNAP-IN
J90, J91 & J93 Actuators
*
* For J90: Increase this dimension to .620/.625
(15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
For J91: Increase this dimension to .620/.625
(15,75/15,88) for .060/.125 (1,52/3,18) thk. panels.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–10
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR–REAR MOUNT
ACTUATOR
FRAME COLOR
J11 ROCKER WITH FRAME
OPTION
CODE
ACTUATOR
COLOR
2
1
3
BLACK
WHITE
RED
OPTION
CODE
FRAME COLOR
2
1
BLACK
WHITE
J19 ROCKER WITH FRAME
Actuator finish: Matte. Frame finish: Gloss. Other
colors, custom actuator markings and legends
available, consult Customer Service Center.
NOTE: Actuators & frames available separately,
see pages H-22 and H-25. J11, J19, J21 & J37
Actuators available with C, W-W5, Z & Z3
terminations.
PANEL MOUNTING
J11 & J21 Actuators
J21 LEVER WITH FRAME
J19 Actuator
J37 ROCKER WITH FRAME
.313
(7,95)
J37 Actuator
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–11
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J1 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
1
3
BLACK
WHITE
RED
J2 LEVER
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Some permissible actuator/termination
combinations may lack clearance between
actuator and PC board, and care must be
exercised to accommodate this condition.
Actuators available separately, see page H-22.
J1, J2 & J8 actuators available with A, A3, AV2,
AV3, AW3 & V2 terminations. J3 actuators
available with AV2, AV3 & V2-V61 terminations.
J50 actuators available with A (DP, 3P models
only), A3 (DP, 3P models only), AV2, AV3, AW3
(DP, 3P models only) & V2-V61 terminations.
J3 ROCKER
J8 ROCKER
J50 ROCKER
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–12
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J60 LEVER
OPTION
CODE
ACTUATOR
COLOR
2
1
3
BLACK
WHITE
RED
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Some permissible actuator/termination
combinations may lack clearance between
actuator and PC board, and care must be
exercised to accommodate this condition.
J90 LEVER
Actuators available separately, see page H-22.
J60 & J90 actuators available with A (DP, 3P
models only), A3 (DP, 3P models only), AV2,
AV3, AW3 (DP, 3P models only) & V2-V61
terminations.
TERMINATIONS
Z
SOLDER LUG
C
PC THRU-HOLE
PC MOUNTING
Not available with K, L or M contact materials.
Available actuators, see pages H-7 through H-13.
SPDT thru 4PDT
SPDT thru 4PDT
NOTE: Available actuators, see pages H-7 through H-13.
Z3 QUICK CONNECT
W, W3, W5 WIRE WRAP
OPTION
CODE
DIM ‘A’
W
.750 (19,05)
.425 (10,80)
1.305 (33,15)
Dim 'A'
W3
W5
Not available with K, L or M contact materials. Available
actuators, see pages H-7 through H-13. Mating quick
connector available; order part number 530100000,
page H-23.
SPDT thru 4PDT
SPDT thru 4PDT
NOTE: Available actuators, see
pages H-7 through H-13.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–13
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
7101J1ABE2
Horizontal Actuation
SECTION A-A
SPDT
Actuator Shown In Pos. 1
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
AW3 RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
PC MOUNTING
.14
(3,6)
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
NOTE: PC pattern must clear switch support leg.
A
RIGHT ANGLE, PC THRU-HOLE
7201J1ABE2
Horizontal Actuation
SECTION A-A
Actuator Shown In Pos. 1
DPDT
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–14
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
7301J1ABE2
Horizontal Actuation
Actuator Shown In Pos. 1
SECTION A-A
3PDT
PC MOUNTING
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7101J1AV2BE2
Vertical Actuation
Actuator Shown In Pos. 1
SPDT
SECTION A-A
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–15
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7201J1AV2BE2
Vertical Actuation
SECTION A-A
Actuator Shown In Pos. 1
DPDT
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7301J1AV2BE2
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
3PDT
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
PC MOUNTING
.150" PITCH
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–16
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7401J1AV2BE2
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
4PDT
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7101J1V5BE2
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
SPDT
V51 VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
PC MOUNTING
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–17
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7201J1V5BE2
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
DPDT
V51 VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
PC MOUNTING
Not available with I seal option. Available actuators, see pages H-7 and H-13.
Terminal bend radii and lead-in manufacturing option.
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
7101J1__BE2
SPDT
OPTION
CODE
DIM ‘A’
V2, V21
V6, V61
V7
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
Actuator Shown In Pos. 1
V8
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–18
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
SNAP-IN
OPTION
CODE
DIM ‘A’
7201J1__BE2
V2, V21
V6, V61
V7
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
DPDT
Actuator Shown In Pos. 1
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
V8
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
SNAP-IN
OPTION
CODE
DIM ‘A’
7301J1__BE2
V2, V21
V7
.555 (14,10)
.630 (16,00)
.953 (24,21)
3PDT
Actuator Shown In Pos. 1
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
V8
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
OPTION
CODE
SNAP-IN
DIM ‘A’
V2, V21
V7
.555 (14,10)
.630 (16,00)
.953 (24,21)
7401J1__BE2
4PDT
Actuator Shown In Pos. 1
V8
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–19
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
7101J1__BE2
SPDT
SNAP-IN
OPTION
CODE
DIM ‘A’
Actuator Shown In Pos. 1
V3, V31
V4
.460 (11,68)
.630 (16,00)
1.150 (29,21)
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
V9
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
7201J1__BE2
DPDT
SNAP-IN
OPTION
CODE
DIM ‘A’
V3, V31
V4
.460 (11,68)
.630 (16,00)
1.150 (29,21)
Actuator Shown In Pos. 1
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
V9
V4, V9 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
7301J1__BE2
3PDT
OPTION
CODE
SNAP-IN
DIM ‘A’
V4
V9
.630 (16,00)
Actuator Shown In Pos. 1
1.150 (29,21)
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–20
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
TERMINATIONS
V4, V9 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
SNAP-IN
7401J1__BE2
OPTION
CODE
DIM ‘A’
4PDT
Actuator Shown In Pos. 1
V4
V9
.630 (16,00)
1.150 (29,21)
Not available with I seal option.
Available actuators, see pages H-7 and H-13.
CONTACT MATERIAL
RoHS
COMPLIANT *
OPTION
CODE
RoHS
COMPATIBLE *
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
1
GOLD
B
K
P
Q
M
S
G
L
YES
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
LOW LEVEL/
DRY CIRCUIT
1
6
GOLD
TIN-LEAD
0.4 VA MAX. @ 20 V AC OR DC MAX.
7
MATTE-TIN
YES
YES
NO
5
SILVER
6
4,5
TIN-LEAD
SILVER
POWER
5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
7
7
MATTE-TIN
YES
YES
NO
3
GOLD
0 4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @
120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
LOW LEVEL/DRY
2,3
6
GOLD OVER SILVER
TIN-LEAD
CIRCUIT OR POWER
R
YES
MATTE-TIN
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
U11-U415 model numbers
Q, S & R contact material.
with all options when ordered with G, L, M,
2
3
END CONTACTS: Coin silver, with gold plate over nickel plate.
B contact material standard with all terminations except C, Z & Z3.
Q contact material standard with C, Z & Z3 terminations.
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4
5
6
7
END CONTACTS: Coin silver, silver plated.
K, L, M, P, S & R, contact materials not available with Z & Z3 terminations.
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
TERMINALS: Copper alloy, with matte-tin over nickel plate.
NOTE: Any models supplied with Q, B, G S, P & R contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
SEAL
E
EPOXY SEAL
I
EPOXY POTTED BASE
'A'
NO.
POLES
DIM ‘A’
SP
DP
3P
4P
.410 (10,41)
.440 (11,18)
.505 (12,83)
.505 (12,83)
Available with C, W through W5, Z & Z3 terminations.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–21
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
Panel mounting hardware for rocker and lever handle switches is
TYPICAL ASSEMBLY
available separately. Mounting hardware consists of two screws,
two nuts, two standoffs and two lockwashers per switch, and is
available for panel thicknesses of 1/16, 3/32 and 1/8 inch.
See part numbers below.
SCREW
PANEL THICKNESS
STAND-OFF
LENGTH
STAND-OFF
LOCKWASHER
NUT
J3 actuators
J1 & J2 actuators
PART NO.
761101000
761102000
761103000
PANEL THK.
1/16 IN. (1,59)
3/32 IN. (2,38)
1/8 IN. (3,18)
STANDOFF LENGTH
.295 (7,49)
PART NO.
PANEL THK.
1/16 IN. (1,59)
3/32 IN. (2,38)
1/8 IN. (3,18)
STANDOFF LENGTH
.295 (7,49)
770601000
770602000
770603000
.264 (6,71)
.264 (6,71)
.233 (5,92)
.233 (5,92)
J10 actuators
PART NO.
770701000
770702000
770703000
PANEL THK.
1/16 IN. (1,59)
3/32 IN. (2,38)
1/8 IN. (3,18)
STANDOFF LENGTH
.295 (7,49)
.264 (6,71)
.233 (5,92)
MATERIAL
Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard.
J1, J11, J15 & J16 Actuators
J2, J21, J25 & J26 Actuators
J3 & J37 Actuators
PART NO.
PART NO.
PART NO.
776A01000 WHITE
776A02263 BLACK
776A03000 RED
760501000 WHITE
760502263 BLACK
760503000 RED
766601000 WHITE
766602263 BLACK
766603000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
J8 Actuator
J50, J51 & J52 Actuators
J60, J61 & J62 Actuators
PART NO.
PART NO.
PART NO.
488701000 WHITE
488702263 BLACK
488703000 RED
775A01000 WHITE
775A02263 BLACK
775A03000 RED
598101000 WHITE
613802263 BLACK
598103000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–22
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
J90 & J91 Actuators
J10 & J19 Actuators
Fits Z3 Termination
female connector
PART NO.
PART NO.
598001000 WHITE
598002263 BLACK
598003000 RED
769501000 WHITE
769502263 BLACK
769503000 RED
PART NO.
530100000
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Available in loose pieces.
Frame for J11 & J21 Actuators
Frame for J16 & J26 Actuators
Frame for J51, J61 & J91 Actuators
PART NO.
PART NO.
PART NO.
459101000 WHITE
459102000 BLACK
459103000 RED
615601000 WHITE
615602263 BLACK
615603000 RED
764500746 BLACK ENAMEL
764500747 WHITE ENAMEL
764601106 RETAINING SPRING
Material: Spring Steel
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Frame for J19 Actuator
Frame for J37 Actuator
Frame for J52 & J62 Actuators
PART NO.
613301000 WHITE
613302263 BLACK
613303000 RED
PART NO.
PART NO.
781000746 BLACK ENAMEL
781000747 WHITE ENAMEL
445400746 BLACK ENAMEL
445400747 WHITE ENAMEL
Material: Nylon
Finish: Matte
Material: Spring Steel
Material: Spring Steel
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–23
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
Frame for J50, J60 & J90 Actuators
MATTE
GLOSS
PART NO.
PART NO.
486701000 WHITE 486801000 WHITE
486702000 BLACK 486802000 BLACK
486703000 RED
486803000 RED
Material: Nylon
NOTE: Other colors available, consult Customer Service Center.
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the
PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator
and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
TYPICAL APPLICATION
J1 & J2 Actuators
.047” (1,19) PANEL THK.
PART NO.
.062” (1,57) PANEL THK.
PART NO.
.090” (2,29) PANEL THK.
PART NO.
.125” (3,18) PANEL THK.
PART NO.
452901000
452902263
452903000
452701000
452702263
452703000
452801000
452802263
452803000
452601000 WHITE
452602263 BLACK
452603000 RED
J50, J60 & J90 Actuators
.047” (1,19) PANEL THK.
PART NO.
.062” (1,57) PANEL THK.
PART NO.
.090” (2,29) PANEL THK.
PART NO.
.125” (3,18) PANEL THK.
PART NO.
432501000
432502263
432503000
432601000
432602263
432603000
432701000
432702263
432703000
432801000 WHITE
432802263 BLACK
432803000 RED
PANEL MOUNTING
For part numbers
4529xxxxx, 4527xxxxx,
4528xxxxx, 4526xxxxx
For part numbers
4325xxxxx, 4326xxxxx
For part numbers
4327xxxxx, 4328xxxxx
.005 R. MAX.
(0,13) TYP.
.005 R.
(0,13)
MAX. TYP.
.005 R.
(0,13)
MAX. TYP.
.495 – .505
(12,57 – 12,83)
.495 – .505
(12,57 – 12,83)
.495 – .505
(12,57 – 12,83)
.797 – .803
(20,24 – 20,40)
.595 – .605
(15,11 – 15,37)
.620 – .625
(15,75 – 15,88)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–24
C&K 7000 Series
Miniature Rocker & Lever Handle Switches
AVAILABLE HARDWARE
Panel Inserts
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
Will fit Separate Snap-in frames for
J50, J60 & J90 actuators
PANEL INSERT
BLANK PANEL INSERT
WITH HOLE FOR LED
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894901000
894902000
894903000
476601000 WHITE
476602000 BLACK
476603000 RED
NOTE: Special colors, custom markings available, consult Customer Service Center.
LED INFORMATION
.025 SQ.
TYP. (0,63)
Flat denotes
cathode.
.200 DIA.
(5,08˘)
Process Information: Soldering to LED leads must be completed within 5 seconds at
500º F (260ºC) maximum.
.030
(0,76)
.230 DIA.
(5,84˘)
LEDs are not supplied with J52, J62 options. LED snaps into switch frame surrounding
actuator and is wired externally.
.750
.340
(19,05)
(8,64)
Suggested LED for J52 & J62 options.
Dimensions for reference only.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–25
7107J21WPI11 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| 7107J21WRI11 | ITT | Toggle Switch, SPDT, Latched And Momentary, 5A, 28VDC, Wire Wrap Terminal, Lever Actuator, Panel Mount, ROHS COMPLIANT | 获取价格 |
|
| 7107J21WSE11 | ITT | Toggle Switch, SPDT, Latched And Momentary, 5A, 28VDC, Wire Wrap Terminal, Lever Actuator, Panel Mount, ROHS COMPLIANT | 获取价格 |
|
| 7107J21WSE22 | ITT | Toggle Switch, SPDT, Latched And Momentary, 5A, 28VDC, Wire Wrap Terminal, Lever Actuator, Panel Mount, ROHS COMPLIANT | 获取价格 |
|
| 7107J21Z3GI22 | ITT | Toggle Switch, SPDT, Latched And Momentary, 5A, 28VDC, Quick Connect Terminal, Lever Actuator, Panel Mount, ROHS COMPLIANT | 获取价格 |
|
| 7107J21Z3QE22 | ITT | Toggle Switch, SPDT, Latched And Momentary, 5A, 28VDC, Quick Connect Terminal, Lever Actuator, Panel Mount, ROHS COMPLIANT | 获取价格 |
|
| 7107J21ZBE22 | LITTELFUSE | Miniature Rocker & Lever Handle Switch | 获取价格 |
|
| 7107J21ZGE22 | LITTELFUSE | Miniature Rocker & Lever Handle Switch | 获取价格 |
|
| 7107J21ZQE12 | LITTELFUSE | Miniature Rocker & Lever Handle Switch | 获取价格 |
|
| 7107J21ZQE22 | LITTELFUSE | Miniature Rocker & Lever Handle Switch | 获取价格 |
|
| 7107J21ZQE32 | LITTELFUSE | Miniature Rocker & Lever Handle Switch | 获取价格 |
|
7107J21WPI11 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
