8261J80AV2KE223 [ITT]
Alternate Action and Momentary Pushbutton Switches; 交替动作和瞬时按钮开关
| 型号： | 8261J80AV2KE223 |
| 厂家： | 
ITT Cannon |
| 描述： | Alternate Action and Momentary Pushbutton Switches |
| 文件： | 总10页 (文件大小：1247K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
Features/Benefits
• Long travel
Typical Applications
A
• Instrumentation
• Available with LED
• Long life contact design
• Computers and peripherals
• Telecommunications and
networking equipment
• Epoxy terminial seal
compatabile with bottom
wash cleaning
• RoHS compliant models
available
Models Available
Specifications
Materials
CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC
or 28 V DC; 3 AMPS @ 250 V AC. See page A-57 for
additional ratings.
CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),
flame retardant (UL 94V-0).
PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled
polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated.
ELECTRICAL LIFE: 50,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 20 mΩ typ. initial @
CAP & FRAME: Nylon, black standard.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 65ºC
SWITCH SUPPORT: Brass or steel, matte-tin plated.
END CONTACTS: Q contact material: Coin silver, silver plated.
See page A-57 for additional contact materials.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CENTER CONTACT & ALL TERMINALS: Q contact material: Copper
alloy, silver plated. See page A-57 for additional contact materials.
CAP INSTALLATION FORCE: 10 lbs. maximum permissible.
TERMINAL SEAL: Epoxy. Refer to soldering and cleaning
in Technical Data Chapter.
NOTE: Any models supplied with P, R, S, Q, B or G contact material are RoHS compliant.
For the latest information regarding RoHS compliance,
please go to: www.ittcannon.com/rohs.
HARDWARE: Nut & Locking Ring: Brass, nickel plated;
Lockwasher: Steel, nickel plated.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-51 thru A-59. For additional options not shown in catalog, consult Customer Service Center. All
models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
Bushing
8161
8168
8261
SPDT On-On
SPDT On-Mom.
DPDT On-On
H
.300" high, flat, hi torque
Contact Material
B Gold
K Gold, tin-lead
P Gold, matte-tin
Q Silver
M Silver, tin-lead
S Silver, matte-tin
G Gold over silver
L Gold over silver, tin-lead
R Gold over silver,
matte-tin
H9 .300" high, flat, hi torque
NONE No bushing choice required
Y3 7.6mm, keyway
Actuator or Plunger
S
.710" high plunger
with .375" dia. cap
Terminations
A
AV2 Vertical right angle,
Right angle, PC thru-hole
J80 Snap-in
J81 Snap-in with frame
J82 Snap-in with frame for LED
J86 Snap-in with frame & LED
PC thru-hole
PC Thru-hole
Solder lug
C
Z
L
.740" high plunger with
.395" dia. cap
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle, snap-in,
PC thru-hole
V3 .460" high, V-bracket
V4 .630" high, V-bracket
V6 .460" high, V-bracket
V21 .555" high, snap-in V-bracket
V31 .460" high, snap-in V-bracket
Seal
E Epoxy
L1 .740" high plunger with
.590" dia. cap
S1 .615" high plunger with
.200" dia. cap
S2 .710" high plunger with
.310" dia. cap
I
Epoxy potted base
Cap Color
2
1
3
4
5
9
Black
White
Red
Orange
Yellow
Gray
Frame Color
Black
W
.750" long, wire wrap
2
Z3 Quick connect
LED Color
Red
NONE Models without LED
3
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–50
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
SWITCH FUNCTION
A
SWITCH FUNCTION
POS. 1 POS. 2
CONNECTED TERMINALS
POS. 1
POS. 2
NO.
POLES
C&K marking this side
C&K marking this side
MODEL NO.
SCHEMATIC
8161
8168
ON
ON
ON
2-3
2-3
2-1
2-1
SP
MOM.
SPDT
SPDT
Terminal Nos.
For Reference Only
Part number shown: 8161SHZQE
DP
ON
ON
2-3,5-6
2-1,5-4
8261
DPDT
DPDT
Terminal Nos.
For Reference Only
Part number shown: 8261SHZQE
MOM. = Momentary
All models
with all options when ordered with G, L, M or Q contact material.
CAP COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
J80 SNAP-IN
PANEL MOUNTING
*
OPTION
CODE
CAP COLOR
BLACK
2
1
3
4
5
9
WHITE
RED
*Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,41/2,18)
thick panels.
ORANGE
YELLOW
GRAY
J81 SNAP-IN WITH BLACK FRAME
PANEL MOUNTING
Cap Finish: matte.
Other colors available, consult
Customer Service Center.
Available with C, W, Z or
Z3 terminations.
NOTE: Caps & frames available
separately, see pages A-58 and A-59.
*
*Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,41/2,18)
thick panels.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–51
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
CAP COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
A
J82 SNAP-IN WITH BLACK FRAME FOR LED
Available with C, W, Z or Z3 terminations.
OPTION
CODE
LED not included.
For LED information, see page A-59.
CAP COLOR
BLACK
2
1
3
4
5
9
NOTE: Caps & frames available
separately, see pages A-58 and A-59.
WHITE
RED
Other colors available, consult
Customer Service Center.
ORANGE
YELLOW
GRAY
CAP COLOR
LED COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
J86 SNAP-IN WITH BLACK FRAME AND LED
PANEL MOUNTING
*
* Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,31/3,18)
thick panels.
8161J86ZQE223
SPDT
Available with C, W, Z or Z3 terminations and SPDT models only.
OPTION
CODE
OPTION
CODE
CAP COLOR
BLACK
LED COLOR
NOTE: Caps & frames available
separately, see pages A-58 and A-59.
2
1
3
4
5
9
3
RED
Other colors available, consult
Customer Service Center.
WHITE
RED
For LED information, see page A-59.
ORANGE
YELLOW
GRAY
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–52
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
CAP COLOR
PLUNGER
ACTUATOR OR PLUNGER
A
S
PLUNGER WITH CAP P/N 7527
S1 PLUNGER WITH CAP P/N 7089
S2 PLUNGER WITH CAP P/N 8018
OPTION
CODE
L
PLUNGER WITH CAP P/N 8941
L1 PLUNGER WITH CAP P/N 8940
CAP COLOR
BLACK
2
1
3
4
5
9
WHITE
RED
ORANGE
YELLOW
GRAY
Cap Finish: gloss. Cap supplied not installed.
Other colors available, consult Customer
Service Center.
NOTE: When selecting plunger and cap option, bushing selection must also be made, see below.
BUSHING
H
.300" HIGH THREADED, FLAT
Y3 7.6mm THREADED, KEYWAY
NONE NO BUSHING CHOICE REQUIRED
(JXX ACTUATORS)
H9 .300" HIGH UNTHREADED, FLAT
1/4 40 UNS-2A
H bushing standard with C, W, Z or Z3 terminations.
H9 bushing standard with A, A3, AV2, AV3, or
V3-V31 terminations.
Withstands 12 in./lbs. of torque with no distortion.
Withstands 12 in./lbs. of torque with no distortion.
NOTE: When selecting bushing option, plunger selection must also be made, see above. No bushing option choice required when any JXX actuator option is selected.
NOTE. Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.
Optional mounting nut and locking ring styles and finishes available, see section “Technical Data and
Additional Hardware”.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–53
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
A
C
PC THRU-HOLE
Z
SOLDER LUG
PC MOUNTING
SPDT and DPDT
SPDT and DPDT
Not available with P, S, R, K, L, or M contact material.
Z3 QUICK CONNECT
W
WIRE WRAP
.750
(19,05)
Not available with P, S, R, K, L, or M contact
material. Mating quick connector available;
order part number 530100000, page A-59.
SPDT and DPDT
SPDT and DPDT
A
RIGHT ANGLE, PC THRU-
HOLE
.130
(3,3)
.138
(3,51)
SECTION A-A
8161SH9ABE2
SPDT
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
NOTE: PC pattern must clear switch support leg.
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–54
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
A
A
RIGHT ANGLE, PC THRU-HOLE
8261SH9ABE2
DPDT
SECTION A-A
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
8161SH9AV2BE2
SPDT
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–55
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
A
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
8261SH9AV2BE2
DPDT
SECTION A-A
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
PC MOUNTING
.150" PITCH
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
V6 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION
CODE
DIM ‘A’
8161SH9__BE2
SPDT
V21
V6
.555 (14,10)
.460 (11,68)
Not available with I seal.
V6 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION
CODE
DIM ‘A’
V21
V6
.555 (14,10)
.460 (11,68)
8261SH9__BE2
DPDT
Not available with I seal.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–56
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
TERMINATIONS
A
V3, V4 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
8161SH9__BE2
SPDT
OPTION
CODE
DIM ‘A’
V3, V31
V4
.460 (11,68)
.630 (16,00)
Not available with I seal.
V3, V4 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
8261SH9__BE2
DPDT
SNAP-IN
OPTION
CODE
DIM ‘A’
V3, V31
V4
.460 (11,68)
.630 (16,00)
Not available with I seal.
CONTACT MATERIAL
OPTION
CODE
TERMINAL
PLATING
RoHS
COMPLIANT *
RoHS
COMPATIBLE *
CONTACT
MATERIAL
RATINGS
1
GOLD
YES
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
B
K
P
Q
M
S
G
L
1
6
GOLD
TIN-LEAD
0.4 VA MAX. @ 20 V AC OR DC MAX.
LOW LEVEL/DRY CIRCUIT
7
MATTE-TIN
YES
YES
NO
5
SILVER
6 AMPS @ 120 V AC OR 28 V DC;
3 AMPS @ 250 V AC.
6
4,5
TIN-LEAD
SILVER
POWER
7
MATTE-TIN
YES
YES
NO
3
GOLD
0.4 VA MAX @ 20 V AC OR DC MAX. OR
6 AMPS @ 120 V AC OR 28 V DC;
3 AMPS @ 250 V AC.
GOLD OVER
6
LOW LEVEL/DRY CIRCUIT OR POWER
TIN-LEAD
2,3
SILVER
YES
7
MATTE-TIN
R
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
NOTE: Any models supplied with P, S, R,Q, B or G contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
END CONTACTS: Coin silver, with gold plate over nickel plate.
2
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
All models
with all options when ordered with S, R, G, L, M or Q
contact material.
4
5
6
7
END CONTACTS: Coin silver, silver plated.
B contact material standard with all terminations except C, Z & Z3.
Q contact material standard with C, Z & Z3 terminations.
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
TERMINALS: Copper alloy, with matte-tin over nickel plate.
P, S, R, K, L & M contact materials not available
with Z & Z3 terminations.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–57
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
SEAL
A
E
EPOXY SEAL
I
EPOXY POTTED BASE
NOTE: Available with C, W, Z, Z3 terminations only.
AVAILABLE HARDWARE
Cap
Cap
Cap
.200 DIA.
(5,08 )
.120
(3,05)
.155
(3,94)
PART NO.
PART NO.
PART NO.
708901000 WHITE
708902000 BLACK
708903000 RED
752701000 WHITE
752702000 BLACK
752703000 RED
801801000 WHITE
801802000 BLACK
801803000 RED
708904000 ORANGE
708905000 YELLOW
708909000 GRAY
752704000 ORANGE
752705000 YELLOW
752709000 GRAY
801804000 ORANGE
801805000 YELLOW
801809000 GRAY
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Cap, Snap-fitting plunger
Cap, Snap-fitting plunger
Cap, J80, J81 & J82 options only
PART NO.
PART NO.
PART NO.
PART NO.
894001000 WHITE
894002000 BLACK
894003000 RED
894101000 WHITE
894102000 BLACK
894103000 RED
484601000 WHITE
484602000 BLACK
484603000 RED
798201000 WHITE
798202263 BLACK
798203000 RED
894004000 ORANGE
894005000 YELLOW
894009000 GRAY
894104000 ORANGE
894105000 YELLOW
894109000 GRAY
484604000 ORANGE
484605000 YELLOW
484609000 GRAY
798204000 ORANGE
798205000 YELLOW
798209000 GRAY
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Matte
Cap, J86 & J96 options only
Frame
Frame
PART NO.
PART NO.
459701000
459702000
459703000
459704000
459705000
459709000
476801000 WHITE
476802000 BLACK
476803000 RED
476804000 ORANGE
476805000 YELLOW
476809000 GRAY
PART NO.
PART NO.
615602263 BLACK
613302263 BLACK
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Matte
NOTE: Additional nuts, locking rings and lockwashers available separately, see section
“Technical Data and Additional Hardware”.
Third Angle
Projection
Other cap & frame colors available, consult Customer Service Center.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–58
C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
AVAILABLE HARDWARE
A
Fits Z3 Termination
female connector
PART NO.
530100000
Available in loose pieces.
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and
frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
TYPICAL APPLICATION
.047" (1,19) PANEL THK.
.062" (1,57) PANEL THK.
.090" (2,29) PANEL THK.
.125" (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
432502263
432602263
432702263
432802263 BLACK
Panel Inserts
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
PANEL INSERT
BLANK PANEL INSERT
WITH HOLE FOR LED
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894902000
476602000 BLACK
Special colors, custom markings available, consult Customer Service Center.
LED INFORMATION
SWITCHES WITH LED SUPPLIED: J86 OPTION:
Rectangular LEDs are supplied on 8060 Series pushbutton switches with J86 option. These LEDs are factory installed and are not replaceable.
The following specifications apply:
MAX RATINGS AT 25ºC AMBIENT TEMPERATURE
.025 SQ.
TYP. (0,63)
TYP.
TYP.
Flat denotes
cathode.
.200 DIA.
(5,08˘)
OPTION
CODE
TYP.
FORWARD FORWARD
VOLTAGE
FORWARD
VOLTAGE
CONTINUOUS
FORWARD CURRENT
POWER
DISSIPATION
COLOR INTENSITY
CURRENT
6
3
5
Green
Red*
1.0 mcd
0.5 mcd
4.0 mcd
20 mA
10 mA
20 mA
50 mA
30 mA
50 mA
125 mW
75 mW
.030
(0,76)
.230 DIA.
(5,84˘)
2.1 V
2.5 V
.750
(19,05)
.340
(8,64)
Yellow
125 mW
Process Information: Soldering to LED leads must be completed within 5 seconds at
500ºF (260ºC) maximum.
Suggested LED for J82 & J84 options.
Dimensions for reference only.
Caution: Circuit elements must limit forward current of LED to 50mA max. continuous.
* Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center.
LEDs are not supplied with J82 & J84 options. LED snaps into switch frame surrounding actuator and
is wired externally.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–59
相关型号：
8261J80CQI2
Pushbutton Switch, DPDT, On-on, Vertical, 6A, 28VDC, 6 PCB Hole Cnt, Solder Terminal, Through Hole-straight
ITT
©2020 ICPDF网 联系我们和版权申明