8321J80D9AV2BE [ITT]
Snap-acting Momentary Pushbutton Switches; 速动瞬时按钮开关型号: | 8321J80D9AV2BE |
厂家: | ITT Cannon |
描述: | Snap-acting Momentary Pushbutton Switches |
文件: | 总17页 (文件大小:2080K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
Features/Benefits
Typical Applications
A
• Positive tactile feel
• Instrumentation
• Multi-positions available
• Wide variety of termination options
• Computer peripherals
• Telecommunications equipment
• Epoxy terminal seal compatible with
bottom wash cleaning
• RoHS complient models available
Models Available
Specifications
Materials
CONTACT RATING: B contact material (8X25 Models): 0.4 VA max.
@ 20 V AC or DC maximum. G contact material (8X21, U8X1
Models): 1 AMP @ 120 V AC or 28 V DC or 0.4 VA max. @ 20 V
AC or DC max. Note: Break-before-makecontacts. Multi-pole
contacts do not make and break simultaneously. See page A-41
for additional ratings.
CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),
flame retardant (UL 94V-0).
PLUNGER: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0).
CAP & FRAME: Nylon, black, standard.
BUSHING: Brass or zinc, nickel plated.
ELECTRICAL LIFE: 60,000 make-and-break cycles at full load.
HOUSING: Stainless steel.
CONTACT RESISTANCE: Below 50 mΩ typ. initial @
SWITCH SUPPORT: Brass or steel, matte-tin plated.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
9
INSULATION RESISTANCE: 10 Ω min.
N.O. & N.C. CONTACTS: 8X21, U8X1 MODELS: G contact material:
Coin silver, with gold plate over nickel plate. See page A-41 for
additional contact materials.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: 8X2X MODELS: –30ºC to 75ºC.
U8X1 MODELS: –30ºC to 65ºC.
8X25 MODELS: B contact material: Copper alloy, with gold plate
over nickel plate. See page A-41 for additional contact materials.
CAP INSTALLATION FORCE: 10 lbs. max. permissible.
COMMON CONTACT & ALL TERMINALS: Copper alloy, with gold
plate over nickel plate.
SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E
method 9 (1 hour steam aging).
TERMINAL SEAL: Epoxy. Refer to slodering and cleaning
Technical Data Chapter.
NOTE: Any models supplied with B, P, R, or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
HARDWARE: Nut & Locking Ring: Brass, nickel plated;
Lockwasher: Steel, nickel plated.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-28 thru A-43. For additional options not shown in catalog, consult Customer Service Center. All
models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
Bushing
D9 .280" high, keyway
Contact Material
B Gold
8121 SPDT On-Mom. 1 Amp
8125 SPDT On-Mom. 0.4VA
8221 DPDT On-Mom. 1 Amp
8225 DPDT On-Mom. 0.4VA
8321 3PDT On-Mom. 1 Amp
8325 3PDT On-Mom. 0.4VA
8421 4PDT On-Mom. 1 Amp
8425 4PDT On-Mom. 0.4VA
Frame Color
2 Black
NONE Models
H
.250" high, flat
K Gold, tin-lead
P Gold, matte-tin
G Gold over silver
L Gold over silver, tin-lead
R Gold over silver,
matte-tin
Actuator or Plunger
Plunger
NONE Snap-in
NONE No bushing
S
choice required
without frame
D
.280" high, keyway
1
3
5
6
9
White
Red
Yellow
Green
Gray
J80 Snap-in
D2 .288" high, flat
D3 .180" high
D8 .288" high, flat
H9 .250" high, flat, hi torque
J81 Snap-in w/frame
J82 Snap-in w/frame for LED
J83 Snap-in w/frame &
flush cap
J84 Snap-in w/frame for LED,
flush cap
Seal
E Epoxy
Note: UL/CSA models
available, see page A-28
and A-29.
Y
.350" high, keyway
I
Epoxy potted
base
LED Color
Y3 6.35mm high,
3
Red
Cap Color
keyway, hi torque
Y4 .378" high, flat, hi torque
Y9 .350" high, keyway
J85 Snap-in w/frame & LED
J95 PC w/V-bracket & LED
NONE Models
2
Black
4
5
6
7
9
Orange
Yellow
Green
Blue
without LED
NONE Models
L
Plunger
5
6
Yellow
Green
without caps
M
Snap-fitting plunger
1
3
White
Red
Gray
Terminations
A4 Right angle, PC thru-hole, reversed terminals V2 .555" high, V-bracket V31 .460" high, snap-in V-bracket
A
Right angle, PC thru-hole
A6 Right angle, PC thru-hole
V3 .460" high, V-bracket V61 .460" high, snap-in V-bracket
V4 .630" high, V-bracket .750" long, wire wrap
V6 .460" high, V-bracket W1 .964" long, wire wrap
V7 .630" high, V-bracket W3 .425" long, wire wrap
V8 .953" high, V-bracket W4 1.062" long, wire wrap
V9 1.150" high, V-bracket Z3 Quick connect
AV2 Vertical right angle, PC thru-hole
C
Z
A2 Right angle, PC thru-hole
A3 Right angle, snap-in, PC thru-hole
AV Vertical right angle, PC thru-hole
AV1Vertical right angle, PC thru-hole
AV3 Vertical right angle, snap-in, PC thru-hole
W
PC Thru-hole
Solder lug
R
Right angle with PCB
R2 Right angle with PCB, reversed terminals
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–27
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
SWITCH FUNCTION
A
SWITCH FUNCTION
POS. 1 POS. 2
CONNECTED TERMINALS
POS. 1
POS. 2
UL/CSA*
NO.
POLES
MODEL
NO.
C&K marking on
opposite side
C&K marking on
opposite side
MODEL NO.
SCHEMATIC
8121
8125
U811
ON
MOM.
MOM.
SP
1-3
1-2
ON
SPDT
SPDT
Terminal Nos.
For Reference Only
Part number shown: 8121SHZGE
8221
8225
U821
ON
ON
MOM.
MOM.
DP
1-3,4-6
1-2,4-5
DPDT
DPDT
Terminal Nos.
Part number shown: 8221SHZGE
For Reference Only
8321
8325
U831
ON
ON
MOM.
MOM.
3P
1-3,4-6,7-9
1-2,4-5,7-8
3PDT
3PDT
Terminal Nos.
For Reference Only
Part number shown: 8321SHZGE
MOM. = Momentary
8X25 models must be ordered with B, K or P contact material.
8X21 and U8X1 models must be ordered with G, L or R contact material.
*U811 thru U841 model numbers
with all options (except R, R2 terminations)
when ordered with G ,L or R contact material.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–28
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
SWITCH FUNCTION
A
SWITCH FUNCTION
POS. 1 POS. 2
CONNECTED TERMINALS
POS. 1 POS. 2
UL/CSA*
NO.
POLES
MODEL
NO.
C&K marking on
opposite side
C&K marking on
opposite side
MODEL NO.
SCHEMATIC
8421
8425
U841
ON
ON
MOM.
MOM.
4P
1-3,4-6,7-9,10-12 1-2,4-5,7-8,10-11
4PDT
4PDT
Terminal Nos.
For Reference Only
Part number shown: 8421SHZGE
MOM. = Momentary
8X25 models must be ordered with B, K or P contact material.
* U811 thru U841 model numbers
with all options (except R, R2 terminations)
8X21 and U8X1 models must be ordered with G, L or K contact material.
when ordered with G, L or R contact material.
CAP COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
FRAME COLOR
J80 SNAP-IN
PANEL MOUNTING
**
OPTION
CODE
CAP AND FRAME COLOR
2
BLACK
NONE
No Frame Color (J80 option)
WHITE
1
3
4
5
6
7
9
RED
NOTE: No frame color choice required.
ORANGE
** Increase this dim. to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
YELLOW
GREEN
BLUE
J81 SNAP-IN WITH FRAME
PANEL MOUNTING
GRAY
Other colors available, consult Customer
Service Center. Cap and Frame Finish: matte.
NOTE: Caps and frames available separately,
see pages A-42 and A-43.
**
NOTE: Available with C, W-W4, Z or Z3 terminations and SPDT and DPDT models only.
Third Angle
Projection
** Increase this dim. to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–29
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
CAP COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
FRAME COLOR
A
J83 SNAP-IN WITH FRAME AND FLUSH CAP
PANEL MOUNTING
**
J82 SNAP-IN WITH FRAME FOR LED
LED not included.
For LED information, see page A-43.
J84 SNAP-IN WITH FRAME FOR LED, FLUSH CAP
LED not included.
For LED information, see page A-43.
OPTION
CODE
CAP AND FRAME
COLOR
2
1
3
4
5
6
7
9
BLACK
WHITE
RED
Other colors available, consult
Customer Service Center.
Cap and Frame Finish: matte.
ORANGE
YELLOW
GREEN
BLUE
Available with C, W-W4, Z or Z3 terminations and
SPDT and DPDT models only.
NOTE: Caps and frames available separately,
see pages A-42 and A-43.
GRAY
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–30
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
CAP COLOR
LED COLOR
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
FRAME COLOR
A
J85 SNAP-IN WITH FRAME AND LED
PANEL MOUNTING
*
* Increase this dim. to .620/.625 (15,75/15,88) for
.091/.125 (2,31/3,18) thk. panels.
8121J85ZGE223
SPST
OPTION
CODE
CAP AND FRAME
COLOR
OPTION
CODE
LED COLOR
RED
Available with C, W-W4, Z or Z3
terminations and SPDT models only.
For LED information see page A-43.
2
1
3
4
5
6
7
9
BLACK
WHITE
RED
3
5
6
YELLOW
GREEN
NOTE: Caps & frames available
separately, see pages A-42 and A-43.
ORANGE
YELLOW
GREEN
BLUE
For LED information see page A-43.
GRAY
CAP COLOR
ACTUATOR—PC MOUNT
ACTUATOR OR PLUNGER
LED COLOR
J95 PC WITH V-BRACKET AND LED
PC MOUNTING
OPTION
CODE
CAP AND FRAME
COLOR
OPTION
CODE
LED COLOR
RED
2
1
3
4
5
6
7
9
BLACK
WHITE
RED
3
5
6
8121J95V3GE23
SPST
YELLOW
GREEN
ORANGE
YELLOW
GREEN
BLUE
For LED information see page A-43.
GRAY
NOTE: Caps available separately, see page A-42.
Available with V3 terminations and SPDT models only.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–31
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
PLUNGER
ACTUATOR OR PLUNGER
A
S
PLUNGER
DIM. ‘A’
DIM. ‘A’
FOR A, A2, A3, A4, A6,
AV-A3, R & R2
TERMINATIONS
DIM. ‘A’
FOR V3-V61
TERMINATIONS
AVAILABLE
BUSHINGS
FOR C, W-W4, Z & Z3
TERMINATIONS
D, D9
H, H9
Y, Y9
Y3
.244 (6,20)
.218 (5,54)
.203 (5,16)
(5,54)
.228 (5,79)
.202 (5,13)
.187 (4,75)
(5,13)
.224 (5,69)
.198 (5,03)
.183 (4,65)
(5,03)
Y4
.185 (4,70)
N/A
.169 (4,29)
.232 (5,89)
.162 (4,11)
.165 (4,19)
.228 (5,79)
.158 (4,01)
NONE NO PLUNGER CHOICE REQUIRED
D2, D8
D3
(JXX ACTUATORS)
N/A
DIM. ‘B’
DIM. ‘B’
FOR C, W-W4, Z & Z3
TERMINATIONS
FOR A, A2, A3, A4, A6,
AV-A3, R & R2
TERMINATIONS
DIM. ‘B’
FOR V3-V61
TERMINATIONS
L
PLUNGER
AVAILABLE
BUSHINGS
Y, Y9
Y4
.178 (4,52)
.090 (2,29)
.162 (4,11)
.074 (1,88)
.158 (4,01)
.070 (1,78)
DIM. ‘C’
DIM. ‘C’
FOR C, W-W4, Z & Z3
TERMINATIONS
FOR A, A2, A3, A4, A6,
AV-A3, R & R2
TERMINATIONS
DIM. ‘C’
FOR V3-V61
TERMINATIONS
AVAILABLE
BUSHINGS
M
SNAP-FITTING PLUNGER
D, D9
H, H9
Y, Y9
Y3
.297 (7,54)
.267 (6,78)
.259 (6,58)
(6,78)
.281 (7,14)
.251 (6,38)
.243 (6,17)
(6,37)
.277 (7,04)
.247 (6,27)
.239 (6,07)
(6,27)
Y4
.259 (6,58)
N/A
.243 (6,17)
.273 (6,93)
.361 (9,17)
.239 (6,07)
.269 (6,83)
.357 (9,07)
D2, D8
D3
N/A
N/A = NOT AVAILABLE
NOTE: When selecting plunger option, bushing selection must also be made, see next page. No plunger option is required when any
JXX actuator option is selected. Additional plunger lengths are available on SPDT and DPDT models, consult Customer Service Center.
Not all plunger lengths sufficient for use with caps, see page A-42.
BUSHING
NONE NO BUSHING
H
.250" HIGH THREADED, FLAT
Y
.350" HIGH THREADED, KEYWAY
D
.280" HIGH THREADED, KEYWAY
CHOICE REQUIRED
(JXX ACTUATORS)
D9 .280" HIGH UNTHREADED,
H9 .250" HIGH UNTHREADED, FLAT
Y9 .350" HIGH UNTHREADED, KEYWAY
KEYWAY
1/4-40 UNS-2A
D9 bushing standard with A-A6,
R, R2 AV-AV3 terminations.
H bushing standard with C, W-W4, Z or Z3 terminations.
H, H9 bushings not available on single pole models with
A3-A6, R, R2 terminations.
Will withstand 12 in./lbs. of torque with
no distortion.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–32
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
BUSHING
A
Y3 6.35mm THREADED, KEYWAY
Y4 .378" HIGH THREADED, FLAT D2 .288" HIGH THREADED, FLAT
D8 .288" HIGH UNTHREADED, FLAT
D3 .180" HIGH UNTHREADED
1/4-40 UNS-2A
D2, D8 bushings not available with
C, W-W4, Z, Z3 terminations.
Y3 & Y4 bushings not available on single pole models with
A3-A6, R, R2 terminations. Will withstand 12 in./lbs. of torque
with no distortion.
D3 bushing available with
A, A2, A3, AV, AV2, AV3 and
V2-V61 terminations only.
NOTE: No bushing option choice required when JXX actuator option is selected. When selecting bushing option, plunger
selection must also be made, see previous page. Plunger lengths vary with bushing and termination options selected.
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.
Optional mounting nut and locking ring styles available, see section “Technical Data and Additional Hardware”.
TERMINATIONS
Z
SOLDER LUG
C
PC THRU-HOLE
PC MOUNTING
Not available with J95 actuator,
K, L, P or R contact material.
Not available with J95 actuator option.
SPDT thru 4PDT
SPDT thru 4PDT
Z3 QUICK CONNECT
W W1, W3, W4 WIRE WRAP
OPTION
CODE
DIM ‘A’
W
.750 (19,05)
.964 (24,49)
.425 (10,80)
1.062 (26,97)
W1
W3
W4
DIM `A'
Not available with J95 actuator option.
Not available with J95 actuator, K, L, P or R
contact material. Mating quick connector avail-
able,order part number 530100000, page A-42.
SPDT thru 4PDT
Third Angle
Projection
SPDT thru 4PDT
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–33
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
TERMINATIONS
A
A
RIGHT ANGLE, PC THRU-HOLE
8121SD9AGE
SPDT
.138
(3,51)
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
Not available with JXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
A
RIGHT ANGLE, PC THRU-HOLE
8221SD9AGE
DPDT
SECTION A-A
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
Not available with JXX actuators and I seal option.
Terminal bend radii and lead-in manufacturing option.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–34
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
TERMINATIONS
A
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
8321SD9AGE
3PDT
SECTION A-A
Not available with JXX actuators and I seal option.
Terminal bend radii and lead-in manufacturing option.
A2 RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
8121SD9A2GE
SPDT
Not available with JXX actuators, I seal option.
Terminal bend radii and lead-in manufacturing option.
A4 RIGHT ANGLE, PC THRU-HOLE, REVERSED TERMINALS
8121SD9A4GE
SPDT
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal.
Terminal bend radii and lead-in manufacturing option.
The A4 and R2 termination options are functionally identical and fit the same PC mounting pattern.
The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the
switch support legs. Unlike the R2, the A4 option is available with UL/CSA.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–35
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
TERMINATIONS
A
A6 RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
8121SD9A6GE
SPDT
The A6 and R termination options are functionally identical and fit the same PC mounting pattern,
The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the
switch support legs. Unlike the R, the A6 option is available with UL/CSA.
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal.
Terminal bend radii and lead-in manufacturing option.
R
RIGHT ANGLE WITH PCB
PC MOUNTING
8121SD9RGE
SPDT
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option.
R termination not UL/CSA approved.
R2 RIGHT ANGLE WITH PCB, REVERSED TERMINALS
PC MOUNTING
8121SD9R2GE
SPDT
Reversed terminals
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option.
R2 termination not UL/CSA approved.
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE, .100" PITCH
PC MOUNTING
8121SD9AVGE
SPDT
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–36
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
TERMINATIONS
A
AV2
VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
8121SD9AV2GE
SPDT
AV3 VERTICAL RIGHT ANGLE, SNAP-IN,,
AV1 VERTICAL RIGHT ANGLE, EXTENDED,
PC THRU-HOLE, .150" PITCH
PC THRU-HOLE, .150" PITCH
PC MOUNTING
Not available with JXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
8221SD9AV2GE
DPDT
AV3 VERTICAL RIGHT ANGLE, SNAP-IN,
AV1 VERTICAL RIGHT ANGLE, EXTENDED,
PC MOUNTING
PC THRU-HOLE, .150" PITCH
PC THRU-HOLE, .150" PITCH
.15 (3,8)
.33 TYP.
(8,4)
Not available with JXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–37
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
TERMINATIONS
A
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, 150" PITCH
8321SD9AV2GE
3PDT
AV1 VERTICAL RIGHT ANGLE, EXTENDED,
PC MOUNTING
PC THRU-HOLE, .150" PITCH
AV3 VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
.15 (3,8)
.33 TYP.
(8,4)
Not available with JXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, 150" PITCH
8421SD9AV2GE
4PDT
AV1 VERTICAL RIGHT ANGLE, EXTENDED,
PC MOUNTING
PC THRU-HOLE, .150" PITCH
AV3 VERTICAL RIGHT ANGLE, SNAP-IN,
PC THRU-HOLE, .150" PITCH
Not available with JXX actuators and I seal.
Terminal bend radii and lead-in manufacturing option.
PC MOUNTING
V2, V6, V7, V8
VERTICAL MOUNT, V-BRACKET
V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION CODE
DIM ‘A’
V2
V6, V61
V7
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
8121SD3__GE
SPDT
V8
Not available with JXX actuators and I seal.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–38
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
TERMINATIONS
A
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
8221SD3__GE
DPDT
OPTION
CODE
DIM ‘A’
V2
V6, V61
V7
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
V8
Not available with JXX actuators and I seal.
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
8321SD3__GE
3PDT
OPTION
CODE
DIM ‘A’
V2
V7
V8
.555 (14,10)
.630 (16,00)
.953 (24,21)
Not available with JXX actuators and I seal.
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
8421SD3__GE
4PDT
OPTION
CODE
DIM ‘A’
V2
V7
V8
.555 (14,10)
.630 (16,00)
.953 (24,21)
Not available with JXX actuators and I seal.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–39
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
TERMINATIONS
A
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
8121SD3__GE
SPDT
OPTION
CODE
DIM ‘A’
V3, V31
V4
.460 (11,68)
.630 (16,00)
1.150 (29,21)
V9
Not available with J8X actuators and I seal.
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
OPTION
CODE
8221SD3__GE
DPDT
DIM ‘A’
V3, V31
V4
.460 (11,68)
.630 (16,00)
1.150 (29,21)
V9
Not available with J8X actuators and I seal.
V4, V9 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
.630
(16,00)
OPTION
CODE
8321SD3V4GE
DIM ‘A’
3PDT
V4
V9
.630 (16,00)
1.150 (29,21)
Not available with JXX actuators and I seal.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–40
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
TERMINATIONS
A
V4, V9 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
.630
(16,00)
8421SD3V4GE
4PDT
OPTION
CODE
DIM ‘A’
V4
V9
.630 (16,00)
1.150 (29,21)
Not available with JXX actuators and I seal.
CONTACT MATERIAL
RoHS
COMPATIBLE *
OPTION
CODE
RoHS
COMPLIANT *
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
1
YES
YES
YES
YES
YES
YES
GOLD
YES
NO
B
K
P
G
L
8x25 MODELS ONLY: 0.4 MAX.
@ 20 V AC OR DC MAX.
LOW LEVEL/DRY CIRCUIT
1
4
GOLD
TIN-LEAD
5
MATTE-TIN
YES
YES
NO
3
GOLD
8X21, U8X1 MODELS ONLY: 0.4 VA MAX
@ 20 V AC OR DC MAX. OR 1 AMP
@ 120 V AC OR 28 V DC.
LOW LEVEL/DRY
2,3
4
GOLD OVER SILVER
TIN-LEAD
CIRCUIT OR POWER
5
R
YES
MATTE-TIN
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
NOTE: Any models supplied with B, P, R or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
1
2
3
ALL CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
N.O. AND N.C. CONTACTS: Coin silver, with gold plate over nickel plate.
U811-U841 models
with all options (except R, R2 terminations) when ordered with
COMMON CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
mandatory G, R or L contact material.
B, P or K contact material must be ordered with 8X25 models.
G, R or L contact material must be ordered with 8X21, U8X1 models.
4
5
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
TERMINALS: Copper alloy, with matte-tin over nickel plate.
P, R, K or L contact material not available with Z, Z3 terminations.
SEAL
E
EPOXY SEAL
I
EPOXY POTTED BASE
NO.
POLES
DIM ‘A’
SP
DP
3P
4P
.410 (10,41)
.440 (11,18)
.505 (12,83)
.505 (12,83)
NOTE: Available with C, W-W4, Z, Z3 terminations only.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–41
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
AVAILABLE HARDWARE
A
Cap
Cap
Cap
PART NO.
PART NO.
PART NO.
708901000 WHITE
708902000 BLACK
708903000 RED
752701000 WHITE
752702000 BLACK
752703000 RED
801801000 WHITE
801802000 BLACK
801803000 RED
708904000 ORANGE
708905000 YELLOW
708906000 GREEN
708907000 BLUE
708909000 GRAY
752704000 ORANGE
752705000 YELLOW
752706000 GREEN
752707000 BLUE
752709000 GRAY
801804000 ORANGE
801805000 YELLOW
801806000 GREEN
801807000 BLUE
801809000 GRAY
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Cap, Snap-fitting plunger
Cap, Snap-fitting plunger
Cap, J80, J81, J82, J83 & J84 options only
PART NO.
PART NO.
PART NO.
PART NO.
894001000 WHITE
894002000 BLACK
894003000 RED
894101000 WHITE
894102000 BLACK
894103000 RED
484601000 WHITE
484602000 BLACK
484603000 RED
798201000 WHITE
798202263 BLACK
798203000 RED
894004000 ORANGE
894005000 YELLOW
894006000 GREEN
894007000 BLUE
894009000 GRAY
894104000 ORANGE
894105000 YELLOW
894106000 GREEN
894107000 BLUE
894109000 GRAY
484604000 ORANGE
484605000 YELLOW
484606000 GREEN
484607000 BLUE
484609000 GRAY
798204000 ORANGE
798205000 YELLOW
798206000 GREEN
798207000 BLUE
798209000 GRAY
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Matte
Frame
Frame
Cap, J85 & J95 options only
PART NO.
PART NO.
459701000
459702000
459703000
459704000
459705000
459706000
459707000
459709000
459701000 WHITE
459702000 BLACK
459703000 RED
459704000 ORANGE
459705000 YELLOW
459706000 GREEN
459707000 BLUE
459709000 GRAY
PART NO.
PART NO.
615601000 WHITE
615602263 BLACK
615603000 RED
615605000 YELLOW
615606000 GREEN
615609000 GRAY
613301000 WHITE
613302263 BLACK
613303000 RED
613305000 YELLOW
613306000 GREEN
613309000 GRAY
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Matte
Fits Z3 Termination
female connector
NOTE: Additional nuts, locking rings and lockwashers available separately, see section
“Technical Data and Additional Hardware”.
PART NO.
Other cap & frame colors available, consult Customer Service Center.
530100000
Available in loose pieces.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–42
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
AVAILABLE HARDWARE
A
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
TYPICAL APPLICATION
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and
frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
.047" (1,19) PANEL THK.
.062" (1,57) PANEL THK.
.090" (2,29) PANEL THK.
.125" (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
432501000
432502263
432503000
432505000
432506000
432509000
432601000
432602263
432603000
432605000
432606000
432609000
432701000
432702263
432703000
432705000
432706000
432709000
432801000 WHITE
432802263 BLACK
432803000 RED
432805000 YELLOW
432806000 GREEN
432809000 GRAY
Panel Inserts
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
PANEL INSERT
BLANK PANEL INSERT
WITH HOLE FOR LED
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894901000
894902000
894903000
894905000
894906000
894909000
476601000 WHITE
476602000 BLACK
476603000 RED
476605000 YELLOW
476606000 GREEN
476609000 GRAY
Special colors, custom markings available, consult Customer Service Center.
LED INFORMATION
SWITCHES WITH LED SUPPLIED: J85, J95 OPTIONS:
Rectangular LEDs are supplied on 8020 Series pushbutton switches with J85 and J95 options. These LEDs are factory installed and are not
replaceable. The following specifications apply:
MAX RATINGS AT 25ºC AMBIENT TEMPERATURE
TYP.
TYP.
.025 SQ.
TYP. (0,63)
OPTION
CODE
TYP.
FORWARD FORWARD
FORWARD
VOLTAGE
CONTINUOUS
FORWARD CURRENT
POWER
DISSIPATION
Flat denotes
cathode.
.200 DIA.
(5,08˘)
COLOR INTENSITY
VOLTAGE
CURRENT
6
3
5
Green
Red*
1.0 mcd
0.5 mcd
4.0 mcd
20 mA
10 mA
20 mA
50 mA
30 mA
50 mA
125 mW
75 mW
2.1 V
2.5 V
.030
(0,76)
.230 DIA.
(5,84˘)
Yellow
125 mW
.750
(19,05)
.340
(8,64)
Process Information: Soldering to LED leads must be completed within 5 seconds at
500ºF (260ºC) maximum.
Caution: Circuit elements must limit forward current of LED to 50mA max. continuous.
* Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center.
LEDs are not supplied with J82, J84 options. LED snaps into switch frame surrounding
actuator and is wired externally.
Suggested LED for J82 & J84 options.
Dimensions for reference only.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–43
相关型号:
©2020 ICPDF网 联系我们和版权申明