9201J1Z4QD12 [ITT]
Power Rocker and Lever Handle Switches; 电源摇臂开关手柄型号: | 9201J1Z4QD12 |
厂家: | ITT Cannon |
描述: | Power Rocker and Lever Handle Switches |
文件: | 总5页 (文件大小:519K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
C&K 9000 Series
Power Rocker and Lever Handle Switches
Features/Benefits
• Thermoset UL 94V-0 housing
• Rugged construction
Typical Applications
• Small equipment
• Shut-off switch
• Variety of actuator and
termination options
• RoHS compliant
Models Available
Specifications
Materials
CONTACT RATING: 9201 Model: 6 AMPS @ 120 V AC or 28 V DC;
3 AMPS @ 250 V AC. 9221 Model: 10 AMPS @ 125 V AC or
28 V DC; 5 AMPS @ 250 V AC.
CASE: Diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Nylon, black standard.
FRAME-REAR MOUNT OPTIONS: Spring steel, black.
BUSHING: Brass, nickel plated.
ELECTRICAL LIFE: 25,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
HOUSING: Stainless steel.
2–4 V DC, 100 mA.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
MOUNTING BRACKET: Stainless steel.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
END CONTACTS: 9201 Model: Coin silver, silver plated.
9221 Model: Silver cadmium oxide.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CENTER CONTACTS: Copper alloy, silver plated
ALL TERMINALS: 9201 Model: Copper alloy, silver plated.
9221 Model: Copper alloy, matte-tin plated.
NOTE: Any models supplied with Q contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
TERMINAL SEAL: Epoxy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
HARDWARE: Nut, Screw & Lockwasher: Stainless steel. Standoff:
Nylon standard, aluminum available, consult Customer
Service Center.
*Cadmium used in electrical contacts is acceptable for RoHS.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages H-53 through H-57. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
9201 DP On-On, 6 Amps
9221 DP On-On, 10 Amps
Actuator
J1 Rocker
J2 Lever
J3 Rocker
J37 Rocker with metal frame
Terminations
Z
Solder lug (9201 only)
AV2 Vertical right angle, PC thru-hole (9201 only)
PC Thru-hole (9201 only)
C
Z4 Quick connect
Contact Material
Q
Silver
Seal
E
D
Epoxy
No Seal
Actuator Color
2
1
3
Black
White
Red
Frame Color
Black
NONE No frame color required
2
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–53
C&K 9000 Series
Power Rocker and Lever Handle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1 POS. 2
CONNECTED TERMINALS
POS. 1
POS. 2
NO.
POLES
MODEL NO.
RATING*
SCHEMATIC
9201
9221
6 AMPS
ON
ON
DP
2-3,5-6
2-1,5-4
10 AMPS
ON
ON
DPDT
DPDT
.140 DIA.(3,56ø)
w/ J10 actuator
1.875
1.625
(47,62)
w/ J10
actuator
(41,28)
w/ J10
actuator
Part number shown: 9201J1ZQE2
Terminal Nos.
Molded On Side Of Case
All 9000 Series models meet international dimensional and electrical requirements.
* See CONTACT MATERIAL, page H-58, for complete ratings.
9221 model must be ordered with Z4 terminations and D seal option.
ACTUATOR COLOR
ACTUATOR–PANEL MOUNT
ACTUATOR
J1 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
1
3
BLACK
WHITE
RED
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting screws, nuts,
lockwashers and standoffs for 1/8 inch
thick panel are supplied standard on all switches with
panel mounting brackets. Actuators available separate-
ly, see page H-56-57. Hardware available separately,
see Technical Data section of this catalog.
J2 LEVER
PANEL MOUNTING
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–54
C&K 9000 Series
Power Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PANEL MOUNT
ACTUATOR
J3 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
1
3
BLACK
WHITE
RED
Actuator finish: Matte. Other colors, custom
actuator markings and legends available,
consult Customer Service Center.
PANEL MOUNTING
NOTE: Actuators available separately, see
page H–56-57. Hardware: two each—mounting
screws, nuts, lockwashers and standoffs for
1/8 inch thick panel are supplied standard on
all switches with panel mounting brackets.
Hardware available separately, see Technical
Data section of this catalog.
ACTUATOR COLOR
ACTUATOR–REAR MOUNT
ACTUATOR
FRAME COLOR
J37 ROCKER WITH METAL FRAME
OPTION
CODE
ACTUATOR
COLOR
.313
(7,95)
2
1
3
BLACK
WHITE
RED
OPTION
CODE
FRAME COLOR
2
BLACK
Actuator finish: Matte. Frame finish: Gloss.
Other colors, custom actuator markings
and legends available, consult Customer
Service Center.
NOTE: Actuators & frames available separately,
see page H-56-57. Hardware: two each—mount-
ing screws, nuts, lockwashers and standoffs for
1/8 inch thick panel are supplied standard on all
switches with panel mounting brackets. Hardware
available separately, see Technical Data section of
this catalog.
PANEL
MOUNTING
Not available with AV2 termination.
TERMINATIONS
Z
SOLDER LUG
C
PC THRU-HOLE
Z4 QUICK CONNECT
PC MOUNTING
9201 and 9221
NOTE: Only termination available with 9221 model. Must be ordered with
D seal option. Mating terminal standard Nema .187" quick connect.
9201 Only
9201 Only
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–55
C&K 9000 Series
Power Rocker and Lever Handle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE
9201J1AV2QE2
Vertical Actuation
DPDT
Terminal Nos. Molded
On Side of Case
9201 Only
NOTE: Terminal bend radii and lead-in manufacturing option.
Terminal spacing greater than 3mm at all points.
CONTACT MATERIAL
RoHS
COMPLIANT *
CONTACT
MATERIAL
RoHS
COMPATIBLE *
TERMINAL
PLATING
OPTION
CODE
RATINGS
MODEL
1,2
2,5
6 AMPS @120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
10 AMPS @125 V AC OR 28 V DC; 5 AMPS @ 250 V AC.
9201
SILVER
SILVER OR TIN
YES
YES
Q
POWER
3,4,0
5
9221
SILVER CADMIUM OXIDE
TIN
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
2
3
4
5
6
NOTE: Any models supplied with Q contact material is RoHS compliant.
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
END CONTACTS: Coin silver, silver plated.
CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.
END CONTACTS: Silver cadmium oxide.
9221 model must be ordered with Z4 terminations and D seal option.
All 9000 Series models meet international dimensional and electrical requirements.
CENTER CONTACTS: Copper alloy, silver plated.
Z4 TERMINALS ONLY: Copper alloy, tin plated.
Cadmium used for electrical contacts is acceptable for RoHS.
SEAL
E
EPOXY SEAL
D
NO EPOXY SEAL
Not available with 9221 model or Z4 terminations.
Must be ordered with 9221 model and Z4 termination.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–56
C&K 9000 Series
Power Rocker and Lever Handle Switches
AVAILABLE HARDWARE
Panel mounting hardware for rocker and lever handle switches is
available separately. Mounting hardware consists of two screws,
two nuts, two standoffs and two lockwashers per switch, and is
available for panel thicknesses of 1/16, 3/32 and 1/8 inch.
SCREW
PANEL THICKNESS
TYPICAL ASSEMBLY
See part numbers below.
STAND-OFF
LENGTH
STAND-OFF
LOCKWASHER
NUT
J1 & J2 actuators
PART NO.
761101000
761102000
761103000
PANEL THK.
1/16 IN. (1,59)
3/32 IN. (2,38)
1/8 IN. (3,18)
STANDOFF LENGTH
.295 (7,49)
.264 (6,71)
.233 (5,92)
J1 Actuator
J2 Actuator
J3, J37 Actuators
PART NO.
PART NO.
760501000 WHITE
760502263 BLACK
760503000 RED
PART NO.
776A01000 WHITE
776A02263 BLACK
776A03000 RED
766601000 WHITE
766602263 BLACK
766603000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
J37 Actuators
NOTE: Additional nuts, screws and lockwashers available separately,
see Technical Data section of this catalog.
Other colors available, consult Customer Service Center.
PART NO.
445400746 BLACK ENAMEL
445400747 WHITE ENAMEL
Material: Spring Steel
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–57
相关型号:
©2020 ICPDF网 联系我们和版权申明