9221T1CWZ4QD2 [ITT]

Toggle Switch, DPDT, Latched, 10A, 28VDC, Quick Connect Terminal, Panel Mount-threaded, ROHS COMPLIANT;


型号：	9221T1CWZ4QD2
厂家：	ITT Cannon
描述：	Toggle Switch, DPDT, Latched, 10A, 28VDC, Quick Connect Terminal, Panel Mount-threaded, ROHS COMPLIANT 开关光电二极管
文件：	总6页 (文件大小：376K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

C&K 9000 Series

Power Toggle Switches

Features/Benefits

• Power ratings up to 10 AMPS

• Double pole models

Typical Applications

• Shut-off switch

• Small equipment

• Locking lever options available

• Wide variety of actuator styles

• RoHS compliant and compatible

Models Available

Specifications

Materials

CONTACT RATING: 9201 Model: 6 AMPS @ 120 V AC or

28 V DC; 3 AMPS @ 250 V AC. 9221 Model: 10 AMPS @

125 V AC or 28 V DC; 5 AMPS @ 250 V AC.

CASE: Diallyl phthalate (DAP) (UL 94V-0).

ACTUATOR: Brass, chrome plated.

BUSHING: Brass or zinc, nickel plated.

HOUSING: Stainless steel.

ELECTRICAL LIFE: 25,000 make-and-break cycles at full load.

CONTACT RESISTANCE: Below 10 m Ω typ. initial @

SWITCH SUPPORT: Brass or steel, matte-tin plated.

2-4 V DC, 100 mA.

END CONTACTS: 9201 Model: Coin silver, silver plated.

9221 Model: Silver cadmium oxide.

INSULATION RESISTANCE: 10 Ω min.

DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

CENTER CONTACTS: Copper alloy, silver plated

ALL TERMINALS: 9201 Model: Copper alloy, silver plated.

9221 Model: Copper alloy, matte-tin plated.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

TERMINAL SEAL: Epoxy.

NOTE: Any models supplied with Q contact material are RoHS compliant and compatible.

For the latest information regarding RoHS compliance, please go to:

www.ittcannon.com/rohs.

HARDWARE: Nut & Locking ring: Brass, nickel plated.

Lockwasher: Steel, nickel plated.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages G-49 thru G-53. For additional options not shown in catalog, consult Customer Service Center.

Switch Function

9201 DPDT, On-On, 6 Amps

9221 DPDT, On-On, 10 Amps

Actuator

Antirotation, .410" high

Locking lever, .650" high

Bushing

H3 .296" high, keyway

CW Splashproof

K1 Locking lever, .680" high

L43 Lever handle with cap

P3 Flatted, anti-rotation, .450" high

.296" high, flat

.687" high, 15/32 bushing

Terminations

Solder lug

T1 .460" high, 15/32 bushing

Z4 Quick connect

(9221 only)

AV2 Vert. right angle, PC thru-hole

(9201 only)

Contact Material

Silver

Seal

Epoxy

PC Thru-hole

D No epoxy

Actuator Color/Finish

NONE Bright chrome

Bushing Finish

NONE Nickel

Black

KXX Actuator Color/Finish

NONE Natural aluminum

Black anodized aluminum

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

G–48

C&K 9000 Series

Power Toggle Switches

SWITCH FUNCTION

CONNECTED TERMINALS

POS. 1

POS. 2

POS. 1

POS. 2

NO.

POLES

MODEL NO.

RATING*

6 AMPS

10 AMPS

SCHEMATIC

9201

9221

2-3,5-6

2-1,5-4

DPDT

1/4 40 UNS-2A

Part number shown: 9201SH3ZQE

Terminal Nos.

Molded On Side Of Case

* See CONTACT MATERIAL, page G-52, for complete ratings.

All 9000 Series models meet international dimensional and electrical requirements.

9221 model must be ordered with Z4 terminations and D seal option.

ACTUATOR FINISH

ACTUATOR

ANTIROTATION, .410" HIGH

P3 FLATTED, ANTIROTATION, .450" HIGH

OPTION

CODE

ACTUATOR FINISH

NONE

NATURAL ALUMINUM—With Nickel Plated Bushing

BLACK

NOTE: Black hardware is supplied when either black actuators or bushings

are specified. All hardware is available separately, see Section O.

Antirotation is standard on all actuators, provides ‘anti-push-in’ feature

on actuator.

Dress nut part number: 709901201 supplied standard with P3 actuator.

.687" HIGH, 15/32 BUSHING

T1 .460" HIGH, 15/32 BUSHING

OPTION

CODE

NONE

ACTUATOR FINISH

BRIGHT CHROME—With Nickel Plated Bushing

BLACK

15/32-32 UNS-2A

NOTE: Bushing option code not required for T & T1 actuators unless CW

splashproof bushing ordered.

Black hardware is supplied when either black actuators or bushings are

specified. All hardware is available separately, see Section O.

Antirotation is standard on all actuators except T & T1, provides ‘anti-push-in’

feature on actuator.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

G–49

www.ittcannon.com

C&K 9000 Series

Power Toggle Switches

ACTUATOR FINISH

ACTUATOR

LOCKING LEVER, .650" HIGH, THREADED

K1 LOCKING LEVER, .680" HIGH, THREADED

Locking Positions

2 Position Lock

1/4-40 UNS-2A

OPTION

CODE

NOTE: To prevent accidental actuation, toggles must be lifted before being

actuated. When released, toggles again lock in place. Bushing option code

not required. Overtightening mounting nut may cause actuator to bind.

ACTUATOR CAP FINISH

NONE

NATURAL ALUMINUM–With Nickle Plated Bushing

BLACK ANODIZED ALUMINUM

L40 LEVER HANDLE

L43 PLASTIC LEVER HANDLE WITH

WITHOUT CAP

ANTIROTATION AND CAP, P/N 4812

OPTION

CODE

ACTUATOR CAP COLOR

BLACK

No Actuator Color (L40 option)

NONE

Other colors available, consult Customer

Service Center.

No color choice required.

Finish: Matte

NOTE: Lever handle actuator L43 supplied, but not installed. For interchangeability, order L40 actuator option and order lever handles separately, see page G-53.

Antirotation is standard on all actuators, provides ‘anti-push-in’ feature.

BUSHING FINISH

BUSHING

H3 .296" HIGH, THREADED, KEYWAY

.296" HIGH, THREADED, FLAT

CW SPLASHPROOF, 15/32 BUSHING

1/4-40 UNS-2A

15/32-32 UNS-2A

OPTION

CODE

BUSHING

FINISH

NONE

NICKEL

BLACK

Will withstand 12 in./lbs. of torque with no distortion.

For T & T1 actuators only.

NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.

Internal actuator seal standard. External

Black hardware is supplied when either black bushings or actuators are specified. Optional mounting bushing seal washer available separately,

nut and locking ring styles and finishes available, see Section O.

order from: Multi-Flex Seals, Inc.,

Hackensack, NJ. Part number: MFS-60064.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

G–50

C&K 9000 Series

Power Toggle Switches

BUSHING FINISH

BUSHING

PANEL MOUNTING

1/4 INCH BUSHING

15/32 INCH BUSHING

Without locking ring.

With standard locking ring.

With small locking ring.

Without locking ring.

With standard locking ring.

TERMINATIONS

SOLDER LUG

PC THRU-HOLE

PC MOUNTING

9201 Only

Z4 .187" QUICK CONNECT

9221 Only

NOTE: Only termination available with 9221 model. Must be ordered with D seal option.

Mates with standard .187 Nema female connector.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

G–51

www.ittcannon.com

C&K 9000 Series

Power Toggle Switches

TERMINATIONS

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE

9201SH3AV2QE

Vertical Actuation

DPDT

SECTION A-A

Terminal Nos.

For Reference Only

Actuator Shown in Pos. 1

PC MOUNTING

9201 Only

NOTE: Terminal bend radii and lead-in manufacturing option.

Terminal spacing greater than 3mm at all points.

CONTACT MATERIAL

OPTION

CODE

TERMINAL

CONTACT MATERIAL

MODEL

RATINGS

PLATING

1,2

2,5

9201

9221

SILVER

SILVER OR TIN

6 AMPS @120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.

10 AMPS @125 V AC OR 28 V DC; 5 AMPS @ 250 V AC.

POWER

3,4,6

SILVER CADMIUM OXIDE

TIN

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

NOTE: Any models supplied with Q contact material are RoHS compliant. For the latest

information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

END CONTACTS: Coin silver, silver plated.

CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.

END CONTACTS: Silver cadmium oxide.

All 9000 Series models meet international dimensional and electrical requirements.

9221 model must be ordered with Z4 terminations and D seal option.

CENTER CONTACTS: Copper alloy, silver plated.

Z4 TERMINALS ONLY: Copper alloy, matte-tin plated.

Cadmium in electrical switch contacts is exempt from RoHS.

SEAL

EPOXY SEAL

NO EPOXY SEAL

Not available with 9221 model or Z4 terminations.

Must be ordered with 9221 model and Z4 termination.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

G–52

C&K 9000 Series

Power Toggle Switches

AVAILABLE HARDWARE

L43 Actuator

Cap

Compatible with S actuator

.843

(21,41)

.312

(7,92)

.383

(9,73)

PART NO.

896801000 WHITE

896802000 BLACK

896803000 RED

706201000 WHITE

706202000 BLACK

706203000 RED

481202000 BLACK

481203000 RED

Material: Nylon

Finish: Matte

Material: Polyethylene

Finish: Matte

Material: Vinyl

Finish: Matte

NOTE: Additional nuts, locking rings and lockwashers

available separately, see Section O.

Other colors available, consult Customer Service Center.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

G-53

www.ittcannon.com

9221T1CWZ4QD2 [ITT]

相关型号：

9221T1H3Z4QD

9221T1H3Z4QD2

9221T1H3Z4QD22

9221T1HZ4QD2

9221T1HZ4QD22

9221TCWAV2QD

9221TCWAV2QD2

9221TCWAV2QD22

9221TCWAV2QE

9221TCWAV2QE2

9221TCWAV2QE22

9221TCWZ4QD