CCM04-1889 [ITT]
CCM04 MKII; CCM04 MKII
| 型号： | CCM04-1889 |
| 厂家： | 
ITT Cannon |
| 描述： | CCM04 MKII |
| 文件： | 总3页 (文件大小：569K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CCM04 MKII
The CCM04 without card guidance is
used where space is at a premium and
the card guidance can be built around
the connector (rather than provided by
the connector itself).
Construction
Contacts
Plating
Copper alloy
Contact area : Gold alloy inlay
Terminals : Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
Moldings
The CCM04 low profile without card
guidance is dedicated to applications
where the overall height of the
connector is paramount. A range of low
profile CCM04 connectors are available
with 1.25 mm thick moldings.
Mechanical Data
Number of Contacts
Mechanical life
Contact force
Card detection switch
actuation force
6, 8
50,000 cycles min
0.25 N min / 0.5 N max
0.8 N max for actuation (end travel switch
actuates when card is 0,9 mm from
card stop) 1.8 N max for complete
depression
Frequency 10 to 500 Hz. Acceleration
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
The wide choice of contact configura-
tions and molding heights suit a broad
range of applications.
Vibration
2
50m/s
Features
2
Shock
Peak value 500 m/s – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
• Available in two molding heights 1,25
mm and 2,75 mm.
• The integrated card detection switch
(optional) is sealed against dust and grit.
Contact Electrical Data
Insulation resistance
Resistance
Current rating
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
• By using an inlay finish in the contact
area, the life of the precious metal is
extended by more than 10 times that
of standard gold plating.
Dielectric strength
• The height of the contact above the
insulator is 0,75 mm, allowing a wider
tolerance for the card entry slot.
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Normally open (closes on card insertion)
100mΩ max
250 Vrms min
1 mA min/ 10 mA max
0.2 VA
• The contact area is spooned to
reduce the risk of accidental (or
deliberate) damage and to optimize
the electrical connection with the card.
Maximum power
Environmental Data
• The tip of the contact is protected by
the molding so that it cannot catch on
the card as the card is being inserted.
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
• The contact design ensures a
consistent and reliable contact force
over the life of the connector.
Damp heat
Salt mist
Card detection switch
Sealed IP 54 For CCM04 1889
Sealed against dust for other versions
• Robustly formed printed circuit tails
are well protected by the insulator
body.
Ordering Code
Part Number
Number of Contacts
Card Presence
Switch
Quantity per Reel
• The moldings are made from high
temperature thermoplastic suited for
infrared and convection soldering
processes.
CCM04-1801
CCM04-1814
CCM04-1889
CCM04-1316
CCM04-1317
6
8
8
8
8
No
No
Yes
Yes
Yes
1800
1300
1000
700
• With tape and reel packaging as
standard, the connectors are designed
to be automatically picked & placed.
700
Packaging
5 reels per box.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
29
CCM04 MK II
Dimensional Drawings
CCM04-1814 PCB layout
CCM04-1814 2 x 4 contacts
DETAIL A
Mated condition
3,81 3,81
SEE DETAIL A
(Component side)
30˚0'
1,5
23,2
2,5
1,5
Plastic outline
0,8
25,5 (REF.)
5,5
5,5
Contact foot area
0,8 x 1
Pad
25,5±0,2
C5
C1
C2
0,75
1,25 ±0,05
C6
C7
C8
Date Code area
XX-XXX
C3
C4
Prohibited area
3,81
25,5
3,81
7,79
Contact location according to
ISO 7816-2 & ENV 1375-1 & GSM11-11
Pick and place area
ø3,5
CCM04-1889 2 x 4 contacts + switch
CCM04-1889 PCB Layout
DETAIL A
Mated condition
3,81 3,81
30˚0'
(Component side)
Plastic outline
Contact foot area
1,5
23,2
1,5
0,8 x 1
Pad
4,4
5,5 2,5 5,5
1,5
10,9
0,8
4,4 (REF.)
SEE DETAIL A
4,4 ±0,2
SEE DETAIL
B
25,5 ±0,2
25,5 (REF.)
C5
C1
C6
C7
C8
C2
C3
C4
23,6
Pick and place area
ø 3,5
0,75
SW
SW
Card stop
0,9±0,25
7,99
3,81 3,81
25,5
Prohibited area
4,4
0,95±0,2
Contact location according to
ISO 7816-2
XX-XXX
Date Code area
+0,10
0,75
-0,05
11,8
15,45
Unless otherwise stated, tolerances are 0,10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
30
CCM04 MK II
Dimensional Drawings
CCM04-1316 PCB layout
CCM04-1316 2 x 4 contacts
CCM04-1317 2 x 4 contacts + switch
CCM04-1317 PCB Layout
Unless otherwise stated, tolerances are 0,10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
31
相关型号：
©2020 ICPDF网 联系我们和版权申明