DETBH9P10 [ITT]
D Subminiature Connector, 9 Contact(s), Male, Solder Terminal,;![DETBH9P10](http://pdffile.icpdf.com/pdf2/p00255/img/icpdf/DETBH9P30_1545622_icpdf.jpg)
型号: | DETBH9P10 |
厂家: | ![]() |
描述: | D Subminiature Connector, 9 Contact(s), Male, Solder Terminal, 连接器 |
文件: | 总5页 (文件大小:503K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
MIL-C-24308 D Subminiature
D H
*
D*H hermetically sealed connectors are designed ture series.
to meet environmental conditions of extreme
pressure differential. These connectors are part
of the ITT Cannon D Subminiature series and are
qualified to MIL-C-24308 (refer to page 41 for
cross reference information). The hermetic seal
prevents leakage and subsequent accumulation
of corrosive moisture behind the connector.
There are five basic shell sizes in both standard
and thru-bulkhead designs which can accommo-
date from nine to 50 contacts. Polarization is
achieved by the keystone shape of the shell, a
feature of all connectors within the D Subminia-
How to Order
D*H
D
E
H
9
P
0
0
1
SERIES PREFIX
SHELL SIZE
CLASS
CONTACT ARRANGEMENT
CONTACT TYPE
FLANGE TYPE
SERIES PREFIX
ITT Cannon prefix
MOUNTING
SHELL SIZE
E, A, B, C, D
CONTACT TERMINATION
J
CLASS
H — Hermetic
CONTACT TYPE
MOUNTING
P
—
Pin only
0
4
—
—
Standard
Shell brazed to plate; can be front or
rear panel mounted
FLANGE TYPE
CONTACT ARRANGEMENT
See page 41.
0
—
Solid flange, no mounting or locking
facilities
CONTACT TERMINATION
1
2
—
—
Two .120 dia. mounting holes
Two jackposts accepting
No. 4-40 screws
1
2
—
—
Eyelet
Solder pot
Printed circuit contacts — Consult factory
D*TBH
D
E
TB
H
9
P
0
SERIES PREFIX
SHELL SIZE
SHELL STYLE
CLASS
SERIES PREFIX
ITT Cannon prefix
CONTACT ARRANGEMENT
CONTACT TYPE
FLANGE TYPE
SHELL SIZE
E, A, B, C, D
CLASS
FLANGE TYPE
H — Hermetic
00 — Solid flange, no mounting or locking
facilities
10 — Two .120 (3.05) dia. mounting holes
20 — Two jackposts accepting #4-40 screws
on layout identification side
SHELL STYLE
TB – Thru-bulkhead
CONTACT ARRANGEMENT
See page J-48.
CONTACT TYPE
P
— Pin only
30 — Two jackposts on both sides
(D*TBH only)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J-45
MIL-C-24308 D Subminiature
D H
*
Materials and Finishes
Shell —
In accordance with ASTM 620, 619, 568 —
Low carbon steel, plated with electro-deposited tin
over cadmium over copper flash
Insulator —
Contacts —
Compression glass
In accordance with ASTM A108 —
Steel, plated with gold over nickel
Military vs. ITT Cannon Current Ratings
The ITT Cannon rating for #20 contacts is 5 Explanation
Average Maximum Temperature vs Connector Size
amps, which means 5 amps for all contacts simul- If 15 wires (normally rated at 7.5 amps per wire for various current ratings of mated pairs of D
taneously. MIL-W-5088 rates #20 contacts at 7.5 maximum, or at least a total bundle current of Subminiature connectors
amps maximum. The explanation is as follows:
112.5 amps) are not to carry more than 20% of
the total 112.5 amps, the average current rating
per wire is 20% of 112.5 amps (total bundle ca-
7.5 AMP CONFINED
7.5 AMP FREE AIR
MIL-W-5088B, Paragraph 3.9.2.1.2 specifies:
300
250
“Table 1 current ratings for cables in bundles are pacity) divided by 15 (number of wires).
based upon 15 or more cables carrying no more
than 20% of the total carrying capacity of the Conclusion
5 AMP CONFINED
bundle.”
The Military rating of #20 contacts or wires is 1.5
amps average (based on 15 wires per bundle or
200
150
Table 1 specifies a current rating of 7.5 amps 15 contacts per plug) vs an ITT Cannon rating of
maximum for single wires in bundles of 15 or 5 amps.
more wires. NOTE: Wires and contacts are both
5 AMP FREE AIR
100
150
considered to be in the category of conductors.
E
A
B
C
D
CONNECTOR SIZE
J
Notes:
1. Free air condition. Connectors not shielded from ambient
condition in any manner.
2. Confined condition. Connectors placed in insulated box (1 x 2
x 3.5) during test, with no moving air.
3. Average maximum temperature stabilization: 1 hour or less in
all cases.
4. All contacts in each mated pair tested were wired in series with
specified current flowing.
5. Ambient conditions 77°F, 50% rh.
Test Data
All voltages are measured from contact to shell,
in unmated condition.
Voltage Rating (ac)
Sea Level 20,000
750 625
Altitude (feet)
50,000
225
70,000
175
Test (Max.)
Insulation Resistance.....5,000 megohms min. when tested
per MIL-STD-202A, Method 302
Contact Voltage Drop ....6.67 millivolts per amp max. when
mated with any Original D or
GOLDEN-D connector receptacle
Air Leakage Rate ...........1 micron cubic ft/hour max. (1.04 x
10-5 cc/sec.) at 1 atm pressure
differential
Vibration Resistance......Exceeds test requirements of MIL-
Ref. MIL-C-24308
STD-202, Method 204, Condition B
Corrosion Resistance .....Exceeds requirements of 48 hour
Ref. MIL-C-24308
salt spray exposure, tested in
accordance with MIL-STD-202,
Method 101
Shock ............................Exceeds tests for MIL-STD-202
Ref. MIL-C-24308 Method 213
DWV..............................750 VAC rms
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J-46
MIL-C-24308 D Subminiature
D H
*
Standard
D*H
D*TBH
J
B•
C
D•
E
F
G
H
J
K
ꢀ008
(0ꢀ20)
—
ꢀ236 (5ꢀ99)
—
ꢀ236 (5ꢀ99)
—
ꢀ226 (5ꢀ74)
—
ꢀ226 (5ꢀ74)
—
M
ꢀ015
(0ꢀ38)
ꢀ334 (8ꢀ48)
—
ꢀ334 (8ꢀ48)
—
ꢀ334 (8ꢀ48)
—
ꢀ334 (8ꢀ48)
—
ꢀ334 (8ꢀ48)
—
X
X
A
ꢀ010
Part Number
by Shell Size
DEH9P-*
ꢀ010
ꢀ010
ꢀ005
ꢀ010
ꢀ010
ꢀ014 (0ꢀ36)
- ꢀ005 (0ꢀ13)
—
ꢀ010
ꢀ010
(0ꢀ13)
(0ꢀ25)
(0ꢀ25)
ꢀ498 (12ꢀ65)
(0ꢀ25)
(0ꢀ25)
(0ꢀ25)
ꢀ904 (2ꢀ39)
—
ꢀ904 (2ꢀ39)
—
ꢀ103 (2ꢀ62)
—
ꢀ103 (2ꢀ62)
—
Solder
ꢀ238 (6ꢀ05)
—
ꢀ238 (6ꢀ05)
—
ꢀ238 (6ꢀ05)
—
ꢀ238 (6ꢀ05)
—
Eyelet
ꢀ161 (4ꢀ09)
—
ꢀ161 (4ꢀ09)
—
ꢀ161 (4ꢀ09)
—
ꢀ161 (4ꢀ09)
—
(0ꢀ25)
(0ꢀ25)
1ꢀ208 (30ꢀ68) ꢀ703 (17ꢀ86) ꢀ984 (24ꢀ99) ꢀ366 (9ꢀ30)
ꢀ725 (18ꢀ42) ꢀ369 (9ꢀ37)
DETBH9P-* 1ꢀ208 (30ꢀ68) ꢀ703 (17ꢀ86) ꢀ984 (24ꢀ99) ꢀ366 (9ꢀ30)
DAH15P-* 1ꢀ545 (39ꢀ24) 1ꢀ029 (26ꢀ14) 1ꢀ312 (33ꢀ32) ꢀ366 (9ꢀ30)
DATBH15P-* 1ꢀ545 (39ꢀ24) 1ꢀ029 (26ꢀ14) 1ꢀ312 (33ꢀ32) ꢀ366 (9ꢀ30)
ꢀ498 (12ꢀ65) ꢀ112 (2ꢀ84)
ꢀ498 (12ꢀ65)
ꢀ498 (12ꢀ65) ꢀ112 (2ꢀ84)
ꢀ498 (12ꢀ65)
ꢀ498 (12ꢀ65) ꢀ128 (3ꢀ25)
ꢀ498 (12ꢀ65)
ꢀ498 (12ꢀ65) ꢀ128 (3ꢀ25)
ꢀ610 (15ꢀ49)
ꢀ610 (15ꢀ49) ꢀ128 (3ꢀ25)
—
—
—
ꢀ932 (23ꢀ67) ꢀ369 (9ꢀ37)
—
—
DBH25P-*
DBTBH25P-* 2ꢀ093 (53ꢀ16) 1ꢀ589 (40ꢀ36) 1ꢀ852 (47ꢀ04) ꢀ384 (9ꢀ75)
DCH37P-* 2ꢀ733 (69ꢀ42) 2ꢀ237 (56ꢀ82) 2ꢀ500 (63ꢀ50) ꢀ384 (9ꢀ75)
2ꢀ093 (53ꢀ16) 1ꢀ589 (40ꢀ36) 1ꢀ852 (47ꢀ04) ꢀ384 (9ꢀ75)
—
1ꢀ479 (35ꢀ57) ꢀ369 (9ꢀ37)
—
—
—
2ꢀ125 (53ꢀ98) ꢀ369 (9ꢀ37)
DCTBH37P-* 2ꢀ733 (69ꢀ42) 2ꢀ237 (56ꢀ82) 2ꢀ500 (63ꢀ50) ꢀ384 (9ꢀ75)
DDH50P-* 2ꢀ640 (67ꢀ06) 2ꢀ133 (54ꢀ18) 2ꢀ406 (61ꢀ11) ꢀ490 (12ꢀ45)
DDTBH50P-* 2ꢀ640 (67ꢀ06) 2ꢀ133 (54ꢀ18) 2ꢀ406 (61ꢀ11) ꢀ490 (12ꢀ45)
—
—
—
2ꢀ000 (50ꢀ80) ꢀ500 (12ꢀ70)
ꢀ103 (2ꢀ62)
—
ꢀ238 (6ꢀ05)
—
ꢀ161 (4ꢀ09)
—
—
—
ꢀ226 (5ꢀ74)
*Add contact termination mounting, and flange type; see part number explanationꢀ
•Dimensions B and D are measured as outside dimensions from the start of the radius cornerꢀ
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J-47
MIL-C-24308 D Subminiature
D H
*
Mounting Dimensions
Hermetic sealing is effective only when connec-
tors are front panel mounted, except for brazed
assemblies in which both shells are brazed to the
plate. Brazed assemblies may be us
front or rear panel mounting, and e
tor is subject to leak test. Consul
other rear mounting applications.
D*H
D*TBH
Part Number
by Shell Size
C
U
Minꢀ
V
Minꢀ
Approxꢀ
Weight
ꢀ005 ꢁ0ꢀ13ꢂ
P
S
DEH9P-*
ꢀ984 ꢁ24ꢀ99ꢂ ꢀ735 ꢁ18ꢀ67ꢂ
ꢀ984 ꢁ24ꢀ99ꢂ
1ꢀ312 ꢁ33ꢀ32ꢂ ꢀ942 ꢁ23ꢀ93ꢂ
1ꢀ312 ꢁ33ꢀ32ꢂ
1ꢀ852 ꢁ47ꢀ04ꢂ 1ꢀ489 ꢁ37ꢀ82ꢂ ꢀ379 ꢁ9ꢀ63ꢂ 1ꢀ682 ꢁ42ꢀ72ꢂ ꢀ477 ꢁ12ꢀ12ꢂ
1ꢀ852 ꢁ47ꢀ04ꢂ
1ꢀ682 ꢁ42ꢀ72ꢂ ꢀ477 ꢁ12ꢀ12ꢂ
2ꢀ500 ꢁ63ꢀ50ꢂ 2ꢀ135 ꢁ54ꢀ23ꢂ ꢀ379 ꢁ9ꢀ63ꢂ 2ꢀ330 ꢁ59ꢀ18ꢂ ꢀ477 ꢁ12ꢀ12ꢂ
2ꢀ500 ꢁ63ꢀ50ꢂ
2ꢀ330 ꢁ59ꢀ18ꢂ ꢀ477 ꢁ12ꢀ12ꢂ
2ꢀ406 ꢁ61ꢀ11ꢂ 2ꢀ010 ꢁ51ꢀ05ꢂ ꢀ510 ꢁ12ꢀ95ꢂ 2ꢀ226 ꢁ56ꢀ54ꢂ ꢀ583 ꢁ14ꢀ81ꢂ
2ꢀ406 ꢁ61ꢀ11ꢂ
2ꢀ226 ꢁ56ꢀ54ꢂ ꢀ583 ꢁ14ꢀ81ꢂ
ꢀ379 ꢁ9ꢀ63ꢂ
ꢀ794 ꢁ20ꢀ17ꢂ ꢀ457 ꢁ11ꢀ61ꢂ
ꢀ794 ꢁ20ꢀ17ꢂ ꢀ457 ꢁ11ꢀ61ꢂ
ꢀ379 ꢁ9ꢀ63ꢂ 1ꢀ120 ꢁ28ꢀ45ꢂ ꢀ457 ꢁ11ꢀ61ꢂ
1ꢀ120 ꢁ28ꢀ45ꢂ ꢀ457 ꢁ11ꢀ61ꢂ
9g
DETBH9P-*
DAH15P-*
DATBH15P-*
DBH25P-*
DBTBH25P-*
DCH37P-*
DCTBH37P-*
DDH50P-*
DDTBH50P-*
—
—
—
—
—
—
23g
25g
J
—
—
—
—
Cross Reference Chart
Military Part Noꢀ
M24308/9-1
M24308/9-2
M24308/9-3
M24308/9-4
M24308/9-5
M24308/9-6
M24308/9-7
ITT Cannon Part Noꢀ
DEH9P002
Military Part Noꢀ
M24308/9-8
ITT Cannon Part Noꢀ
DBH25P001
Military Part Noꢀ
M24308/9-15
M24308/9-16
M24308/9-17
M24308/9-18
M24308/9-19
M24308/9-20
ITT Cannon Part Noꢀ
DDH50P202
DEH9P201
DAH15P002
DBH25P002
DCH37P002
DDH509002
DEH9P001
M24308/9-9
M24308/9-10
M24308/9-11
M24308/9-12
M24308/9-13
M24308/9-14
DCH37P001
DDH50P001
DEH9P202
DAH15P202
DBH25P202
DCH37P202
DAH15P201
DBH25P201
DCH37P201
DDH50P201
DAH15P001
Contact Arrangements
Face View
Pin Insert
Shell Size
Noꢀ of Contacts
Contact Size
E
9
#20
A
B
15
25
#20
#25
Shell Size
Noꢀ of Contacts
Contact Size
C
D
37
50
#20
#20
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J-48
相关型号:
©2020 ICPDF网 联系我们和版权申明