DPJMB-98-34S-B-2 [ITT]
Rack and Panel Connector, 98 Contact(s), Female, Crimp Terminal, Receptacle;
| 型号： | DPJMB-98-34S-B-2 |
| 厂家： | 
ITT Cannon |
| 描述： | Rack and Panel Connector, 98 Contact(s), Female, Crimp Terminal, Receptacle 连接器 |
| 文件： | 总7页 (文件大小：338K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DPGM/DPJM/DPJMB
Environmental, Rectangular Connectors for
Aircraft, Missile and Ground Support
Equipment Applicatoins
Cannon's DPGM, DPJM, and DPJMB connectors are
designed for applications where space and weight are
prime considerations. Their rectangular shape
provides maximum space utilization and permits
easy removal of equipment for inspection and/or
repair. DPGM and DPJM connectors feature crimp
snap-in contacts with ring-type retention while
DPJMB connectors feature the LITTLE CAESAR®
rear release contact retention assembly (rear insertion,
release
and
extraction
of
crimp
snap-in
contacts). They both have one piece diallyl phtha-
late insulators with polychloroprene wire sealing
grommets. They also incorporate a peripheral seal
design that allows an axial tolerance of up to .125
(3.175) while still effecting
a seal. The 34 shell
utilizes a rubber seal encased in such a way that the
step down design of the mating 33 shell seats into
and against it.
For all new applications, the referenced connectors For replacements it is suggested that where pract-
will be available only with insulators in the normal ical, customers using these connectors with re-
position, that is, pin insulators in the 34 (receptacle) versed insulators change to connectors with
shells and socket insulators in the 33 (plug) insulators in the normal position. However, for those
All of these connectors utilize keystone corners for
polarization and are coupled by friction. Two shell
styles with different mounting provisions are avail-
able.
shells.
who are unable to change we will furnish connect -
tors with reversed insulators to maintain their
equipment usage.
Standard Data
DPGM/DPJM/DPJMB
Aluminum alloy
Material
Shell
Cadmium plate with olive drab irridite
Diallyl phthalate
Finish
Material
Insulator
Contacts
Copper alloy
Material
Gold plate
Finish
Crimp
Termination
No. of Contacts
8, 12, 15, 16, 20, 21, 32, 59, 98
Contact
Arrangements
How To Order
DPJ
MB- 98
M- 21
-34
-33
P
-K
-K
DPG
S
-2
SERIES PREFIX
CLASS
CONTACT ARRANEMENT
SHELL TYPE
CONTACT TYPE
MOUNTING
MODIFICATION
SERIES PREFIX
SHELL TYPE
Contacts, coaxials and junction shells must be
ordered separately, except for the DPJMB where
the contacts are supplied with the connector. When
(ordering or reordering) please specify the 3-4-3
contact part number as shown. We have cross-
referenced these new part numbers with the previ-
ous part numbers (which have been obsoleted) for
vour convenience.
DPG, DPJ
33 for plug, 34 for receptacle
CONTACT TYPE
CLASS
P for pin, S for socket
M - One piece insulator
ring - type rentention
MOUNTING
MB - LITTLE CAESAR contact retention assembly
33-K-With 6-32 clinch nuts
CONTACT ARRANGEMENTS
DPGM - C8, 12, 15, 16, 20C4, 21 and 32
DPJM - C21, 59, 59C10, and 98
DPJMB - 59, 98
33-B-Clearance holes for 6-32 screw
34-K-Floating eyelet with 6-32 tapped I.D.
34-B-Floating eylet with .140 I.D.
Example:
031-0900-001 new "3-4-3" part number
MODIFICATION
(038819-001) previous part number
-2-.125 (3.18) removed from front lip of -33
shell
www.ittcannon.com
98
DPGM/DPJM/DPJMB
Shell Dimensions - DPGM
33 SHELL
.109 (2.77)
.912 (23.16) MAX.
1.688 (42.88)
2.50 R.
(6.35)
.031 (0.79) R.
1.116 +_ .004
(28.35 +_0.10)
.156 (3.96)
.562 +_ .004
(14.27 +_0.10)
.1.062
(26.91)
.788
(20.02)
.639 +_ .004
(16.23 +_0.10)
1.414 +_ .004
(35.92 +_0.10)
.125 R.
(3.18)
.625 (15.88)
2.000 +_ .004
(50.80 +_0.10)
1.250
(31.75)
MAX.
.171 R.
(4.34)
34 SHELL
1.225
(31.12)
MAX.
.109(2.77) MIN.
TYP.
.912 MAX.
(23.16)
2.000 +_ .004
(50.80 +_0.10)
.109 (2.77)
.312 R.
(7.92)
.562 +_ .004
(14.27 +_0.10)
.998
(25.35)
.908
(23.06)
TWO
FLOATING
EYELETS
1.533 +_ .004
(38.94 +_0.10)
.188 R.
(4.78)
.500 (12.70)
Shell Dimensions -DPJM/DPJMB
33 SHELL
3.562 (90.47)
.109 (2.77)
.625 (15.88)
1.006
(25.55)
MAX.
2.760 +_ .004
(70.10 +_0.10)
.562 +_ .004
(14.27 +_0.10)
.880
(22.35)
1.156
(29.36)
.021 R.
(0.53)
.125 R.
(3.18)
.250 R.
(6.35)
.171 R.
(4.34)
1.250
(31.75)
MAX.
3.254 +_ .005
(82.65 +_0.10)
3.875 +_ .005
(98.42 +_0.13)
34 SHELL
.109 (2.77) MIN
TYP.
.500
.109
(2.77)
1.011
(25.68)
MAX.
.218 R.
(5.54)
3.875 +_ .004
(98.42 +_0.10)
(12.70)
.312 R.
(7.92)
.188 R.
(4.78)
.562 +_ .004
(14.27 +_0.10)
1.000
(25.40)
1.097
(27.86)
1.225
(31.12)
MAX.
.046
(1.17)
3.377 +_ .005
(85.78 +_0.13)
Two floating eyelets.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
99
DPGM/DPJM/DPJMB
Contact Arrangements
DPGM
1
4
1
5
2
4
3
3
2
9
15
10
7
9
6
1
8
5
8
6
2
3
5
4
12
5
7
8
6
13
11
3
7
10
9
1
8
7
6
12
13
11
10
2
4
14
11
16
15
14
12
C8*
12*
15*
16*
No. of Contacts & Wire Size
Test Voltage AC (RMS)
8 coax (1-8)
1000
12 #16 (1-12)
See note
15 #16 (1-15)
See note
5 #20 (3,6,10,11 & 16)
1500
9 #20 (1,4,5,7-9, 13-15)
1700
(2 #20 (2&12)
1500
8
6
4
5
2
1
4
1
7
3
2
3
6
4
5
2
1
7
3
16
24
14
22
12
20
13
21
10
18
9
15
23
11
19
13
20
11
18
12
19
9
8
14
21
10
17
17
6
12
20
11
19
9
8
7
5
10
18
16
15
32
30
28
29
26
25
31
27
14
13
17
16
15
20C4*
21*
32*
No. of Contacts & Wire Size
Test Voltage AC (RMS)
16 #20 (5-20)
1500
21 #20 (1-21)
1500
32 #20 (1-32)
1500
4 COAX (1-4)
1000
*All DPGM arrangements have a 1500 VAC test voltage except for arrangements 12 and 15, which is 3200 VAC for contact 1,5,8 and 12. The remaining contacts have a 2200 VAC test
voltage. All coaxials have 1000 VAC rms test voltage.
DPJM/DPJMB
9
8
6
3
2
7
5
4
8
7
6
5
4
3
2
1
1
10
12
11
10
9
13
23
22
43
21 20
19 18
17 16 15
14
35
11
34 33
32
58
31 30
42 41
57 56
29 28
40 39
55 54
27 26 25
38 37 36
53 52 51
24
50
13
16
15
14
12
20
19
21
18
17
48
47
46
45
44
59
49
C21*
59
No. of Contacts & Wire Size
Test Voltage AC (RMS)
21 COAX (#1-21)
49 #20 (1-8,14-44 & 50-59)
1000
1500
10 #12 (9-13 & 45-49)
1500
16 15
36 35
57 56
77 76
98 97
14 13
12 11 10
30 29
51 50
71 70
92 91
9
8
7
6
5
4
3
2
1
12
11
10
9
8
7
6
5
4
3
17 16 15
27 26 25
38 37 36
53 52 51
2
1
13
34 33 32 31
55 54 53 52
75 74 73 72
28 27 26
25 24 23
46 45 44
66 65 64
22 21
20 19 18
17
23
34 33
44
22
43
21 20
19 18
29 28
40 39
55 54
14
35
49 48 47
69 68 67
43 42
63 62
84 83
41 40 39
61 60 59
38 37
58
32
58
31 30
42 41
57 56
24
50
49
48
47
46
45
96 95 94 93
90 89 88
87 86 85
82 81 80
79 78
59
59C10*
98*†
49 #20 (1-8, 14-44&50-59)
98 #20 (1-98)
1500
No. of Contacts & Wire Size
Test Voltage AC (RMS)
1700
10 COAX (9-13&45-49)
1000
*
All DPJM and DPJMB power contact arrangements have a 1500 VAC rms test volstage. Coaxials have 1000 VAC rms voltage.
†* Available with LITTLE CAESAR contact assembly (DPJMB).
Current Carrying
Capacity of
Wires and Cables
Wire Size
#4
Amperage
80
#8
46
23
13
7.5
#12
#16
#20
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
100
DPGM/DPJM/DPJMB
Junction Shells
DPGM
DPJM/DPJMB
DPGM junction shells are essentail for proper in-
stallation of connector and are ordered separately.
.125 (3.18) DIA., 4 HOLES
.250 (6.35)
.248 (6.30)
1.001
(25.42)
.901
(22.88)
MAX.
.813
(20.65)
TYP.
1.526
(38.76)
3.190 (81.03) TYP.
.090 (2.28)
3.371 (85.62)
Part No. 248-1711-000
Part No. 248-1710-000
(038989-0000)
(038988-0000)
Part No. 248-1711-000
(038989-0000)
Part No. 248-1710-000
(038988-0000)
Wire Bushings
Small wires should be provided with rubber bushings before crimpin. Approximately 1/16 (1.59) of an inch
of bushing is visible when installed into grommet. Grommets witll seal with out bushings or wire .096 (2.44)
to.185 (4.70) to diameter.
Sealing Wires on #12 and Coaxial Contacts
3/8 (9.52)
New Part
Number
Existing
Part Number
Wire Size
O.D.
I.D
A
A
012-0319-000
012-0435-000
021604-0002
021604-0004
.040-.083
.080-.096
.062
.080
1/8 (3.18) DIA.
Hole Fillers
All holes in grommet require filling either by a wire
and contract, or by means of wire hole plugs.
Contact
Size
Part Number
20
225-0070-000
225-0071-000
225-0072-000
225-0085-000
16
12
Coaxial
Contact/Coaxial Data and Termination Tool
Wire
Size
Accom.
Contact Part Number
DPJMB
Contact
Size
Crimp Tool
Part No.
Locator
Color
Extraction
Tool No.
Pin
Socket
Locator
20
12
20-24
12-14
030-9081-001
030-9185-002
031-9082-001
031-9186-002
M22520/1-01
M22520/1-01
M22520/1-02
M22520/1-02
red
CET 20-14
CET 12-4
yellow
Wire
Size
Accom.
Contact Part Number
DPGM/DPJM
Contact
Size
Crimp Tool
Part No.
Locator
Color
Extraction
Tool No.
Pin
Socket
Locator
20
20-24
16-20
12-14
18
031-0905-000
(038820-0001)
031-0944-000
(040370-0000)
031-0909-000
(038825-0000)
031-0907-000
(038820-0000)
031-0900-001
(038819-0001)
031-0945-000
(040371-0000)
031-0908-000
(038826-0000)
031-0906-000
(038819-0002)
M22520/1-01
M22520/1-01
M22520/1-01
M22520/1-01
M22520/1-02
CIT 20
CIT 16
CIT 12
CIT 18
CET 20A
CET 16
CET 12
CET 20A
16
M22520/1-02
M22520/1-02
M22520/1-02
12
20-18
Wire
Size
Accom.
Contact Part Number
Coaxials
Contact
Size
Crimp Tool
Part No.
Insertion
Tool No.
Extraction
Tool No.
Pin
Socket
Plug
Recept
249-1178-001
249-1177-001
M22520/5-01
with Y-193 Die
WT400
CIT C2
CET C1
50 ohm
(RG 196/U)
COAX
COAX
COAX
COAX
(038834-0001)
249-1176-001
(038832-0001)
249-1174-001
(038830-0001)
249-1172-001
(038828-0001)
(038833-0001)
249-1175-001
(038831-0001)
249-1173-001
(038829-0001)
249-1171-001
(038827-0001)
75 ohm
(RG 1871U)
CIT C2
CIT C2
CIT C2
CET C1
CET C1
CET C1
995-001-071
WT402
95 ohm
(RG 195/U)
HX3-138
WT408
150 ohm
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
101
DPGM/DPJM/DPJMB
Assembly Procedures
Wiring and Crimping Contacts
#20 Contact
#2018, #16 & #12 Contact
3/16 (4.76)
1/4 (6.35)
Wires should be stripped to the dimension
appropriate to the contact use
.089 DIA. MAX
(2.26)
SUPPORT OMITTED ON
DPJMB CONTACT
Contact Size
1. CONTACT INTO CRIMP TOOL
Drop contact into crimp tool, it will locate on the contact shoulder.
2. WIRE INTO CONTACT
Take wire stripped to dimensions above, and push into the contact crimp pot until it is completely home.
Where outside diameter of wire in the #12 or COAXIAL contact is less than .096 (2.44), a rubber
bushing most be slipped over the wire before crimping (see page 103).
CONTACT
#20
WIRE
3. CRIMP
Squeeze the crimp tool to secure the wire into the contact. It is not possible to remove the contact from
the crimp tool until crimp is completed.
4. REMOVED WIRED CONTACT FROM TOOL
#2018
#16
#12
5. INSPECT
If wires are stripped and crimped correctly, the wire will be visible through the small inspection hole in
the contact.
Contact Insertion (DPGM/DPJM)
After the contacts have been crimped, they should
be threaded through the junction shell and inserted
with the tools shown below. It is recommended that
the contacts be inserted in the center horizontal
row first, then work to the top and bottom horizon-
tal rows.
Inserting #20 & #16
Contacts
Inserting Coaxial & #12
Contacts
Contact
Tool
Description
Assembly
Number
038894-0000
038895-0000
038896-0000
038901-0000
CIT - 20
CIT - 16
CIT - 12
CIT - C2
#20
#16
#12
Coaxial
50-75,95 &
150 ohm
Contact Extraction (DPGM/DPJM
If it is necessary at any time to remove contacts,
this may be accomplished with an impact extraction
tool. Simply place the correct tool on the engaging
end of the contact and push. A reversible tip is
provided for pins and sockets.
Extracting #20 & #16
Contacts
Extracting Coaxial & #12
Contacts
Contact
Tool
Description
Assembly
Number
CET - 20A
CET - 16
CET - 12
CET - C1
038889-0100
038888-0000
038890-0000
038869-0000
#20
#16
#12
Coaxial
50-75,95 &
150 ohm
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
102
DPGM/DPJM/DPJMB
Assembly Procedures
Coaxial Contact Assembly (DPGM/DPJM)
Cable Stripping
Cable Trim Dimensions
Cable Entry Dimensions
A
B
C
D
E
F
.035 DIA
(0.89)
min. dia.
max. dia.
min. dia.
A
B
C
150 ohm 3/16 (4.76) 1/16 (1.59) 5/32 (3.97)
.154 (3.91) .183 (4.65) .202 (5.13)
.106 (2.69) .139 (3.53) .153 (3.89)
.122 (3.10) .158 (4.01)
95 ohm
75 ohm
50 ohm
3/16 (4.76)
3/16 (4.76)
1/4 (6.35)
1/8 (3.18) 5/64 (1.98)
1/8 (3.18) 5/64 (1.98)
1/8 (3.18) 5/64 (1.98)
D
F
E
.106 (2.69) .136 (3.53)
50 Ohm Contact (RG-196U)
(assembly steps 1,
2, 3, 4, 5 & 8)
75 Ohm Contact (RG-187U)
(assembly steps 1,
2, 3, 5 & 8)
95 Ohm Contact (RG-195U)
(assembly steps 1,
3, 6, 7 & 8)
CRIMP RING
CRIMP RING
BUSHING
BUSHING
SHIM
CRIMP RING
Assembly Steps
4. Wrap shim around braid. (50 ohm)
7. Slip crimp over the braid. (95 ohm)
1 . After the coaxial cable has been stripped to the
proper dimensions, tin the center conductor. If
O.D. of cable is less than .096 (2.44), slip
rubber bushing over wire. (50, 75 & 95 ohm)
2. Assemble crimp ring under braid and add bush-
ing to cable. (50 & 75 ohm)
8. Crimp - crimp tool must be located 1/16
(1.58) to 5 / 64 (1.98) from shoulder of coaxial.
(50, 75 & 95 ohms)
.063 (1.59)
.125 (3.18) MIN. PLUG
.063 (1.59) MIN. RECPT
EDGE OF
CRIMP TOOL
.078 (1.98)
SHIM
CENTER CONTACT
DIELECTRIC
JACKET
5. Feed cable and assembled parts into coaxial
shell. Care is required if braid is to fit smoothly
inside the shell. (50 & 75 ohm)
SEALING GROMMET LOACATION
6. Thread crimp ring over cable. Feed center con-
tact into coaxial shell with the shell between the
dielectric and the braid. (95 ohm)
BUSHING
CENTER CONDUCTOR
CRIMP RING
BRAID
3. The center contact is supplied loose in the
polyethylene bag. Insert the tinned conductor
into the contact. Wire must be visible through
inspection hole and dielectric pushed against
contact shoulder. For 150 ohm contact shoulder
must be flush against bushing. Heat contact
with a clean soldering iron. Avoid solder outside
contact, (50, 75, & 95 ohm)
JACKET
BRAID
CRIMP RING
SHELL
INSPECTION HOLE
CENTER CONDUCTOR
CENTER CONTACT
DIELECTRIC
APPLY CLEAN SOLDERING IRON
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
103
DPGM/DPJM/DPJMB
Junction Shell, Assembly of
Slip junction shell over grommet and secure with
four screws and lock washers.
Panel Cutouts
33 and 34 Shell Styles
DPGM
DPJM
DPJMB
.3.480 (88.39)*
3.470 (88.14)
3.879 (98.53)
3.871 (98.32)
2.004 (50.90)
1.996 (50.70)
1.105 (28.07)*
1.095 (27.81)
.262 (6.85)
.252 (6.40)
.217 (5.51)
.207 (5.26)
D
.166 (4.22) R. TYP.
.146 (3.71)
C
A
B
.565 (14.35)
.559 (14.45)
.565 (14.35)
.559 (14.45)
.143 (3.63) DIA. TYP.
.141 (3.58)
.143 (3.63) DIA. TYP
.166 (4.22) R. TYP.
.141 (3.58)
.146 (3.71)
Gap Between
Flanges after mating
*These dimensions allow for float mounting.
A
B
C
D
PANEL THICKNESS: Maximum sum of both panel thicknesses is 7/16 of an inch when 33 plug and 34
receptacle are back mounted. Shell style 33 modifications A and -2 can be back mounted ONLY. Shell
style 33 modifications B and shell style 34 modifications B and H may be front or back mounted
Consult factory for additional information.
1.609(40.87) .985(25.02)
1.599(40.61) .975(24.76)
1.636(41.55) 1.011(25.68)
1.626(41.30) 1.001(25.42)
.214(5.44) .203(5.16)
.204(5.18) .193(4.90)
.227(5.76) .190(4.83)
.217(5.51) .180(4.57)
.500(12.70)
{
DPGM-33
DPG-34
.625(15.88)
.500(12.70)
{
.625(15.88)
Mounting Variations
33 Shell
6-32 NC-2 THD
PLAIN HOLE
6-32 NC-2 THD
SELF-LOCKING NUT
SELF-LOCKING NUT
IN FLANGE
PANEL
B
A-2
A
SHORTENED
34 Shell
6-32 NC-2 THD
PLAIN HOLE
SELF-LOCKING NUT
FLOAT MOUNTING
PANEL
A
B
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
104
相关型号：
©2020 ICPDF网 联系我们和版权申明