E207J1AGE32
更新时间:2024-09-19 04:42:26
品牌:ITT
描述:ROCKER SWITCH, DPDT, LATCHED AND MOMENTARY, 7.5A, 28VDC, THROUGH HOLE-RIGHT ANGLE, ROHS COMPLIANT
E207J1AGE32 概述
ROCKER SWITCH, DPDT, LATCHED AND MOMENTARY, 7.5A, 28VDC, THROUGH HOLE-RIGHT ANGLE, ROHS COMPLIANT 翘板开关
E207J1AGE32 规格参数
是否Rohs认证: | 符合 | 生命周期: | Transferred |
包装说明: | ROHS COMPLIANT | Reach Compliance Code: | unknown |
ECCN代码: | EAR99 | HTS代码: | 8536.50.90.40 |
风险等级: | 5.18 | 执行器类型: | LONG ROCKER |
主体宽度: | 12.7 mm | 主体高度: | 11.43 mm |
主体长度或直径: | 12.7 mm | 触点(交流)最大额定R负载: | 7.5A@125VAC |
最大触点电流(交流): | 7.5 A | 最大触点电流(直流): | 7.5 A |
触点(直流)最大额定R负载: | 7.5A@28VDC | 最大触点电压(交流): | 125 V |
最大触点电压(直流): | 28 V | 电气寿命: | 40000 Cycle(s) |
JESD-609代码: | e4 | 安装特点: | THROUGH HOLE-RIGHT ANGLE |
最高工作温度: | 85 °C | 最低工作温度: | -30 °C |
密封: | EPOXY TERMINAL SEALED | 表面贴装: | NO |
开关动作: | LATCHED AND MOMENTARY | 开关功能: | DPDT |
开关类型: | ROCKER SWITCH | 端子面层: | Gold (Au) - with Nickel (Ni) barrier |
端接类型: | SOLDER |
E207J1AGE32 数据手册
通过下载E207J1AGE32数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
Features/Benefits
Typical Applications
• Telecommunications
• Instrumentation
• Sealed against solder and cleaning
process contaminants
• ESD Resistance—all actuator options
• Rocker, case & bushing UL 94V-0
• RoUS compliant
• Computers & peripherals
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (E1XX & E2XX Models): 7.5 AMPS
@125 V AC or 28 V DC; 3 AMPS @ 250 V AC. (E3XX Models):
5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC.
See page H-37 for additional ratings.
CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat
stabilized (UL 94V-0).
ACTUATOR: Nylon, black standard, internal o-ring seal standard
with all actuators.
FRAME: Spring steel, black standard.
ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break
cycles at full load. E3XX models: 30,000 cycles.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
ACTUATOR PIVOT & MOUNTING BRACKET: Nylon.
ACTUATOR PIVOT RETAINER: Stainless steel.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
CONTACTS & TERMINALS: B contact material: Copper alloy, with gold
plate over nickel plate. Q contact material: Copper alloy, silver
plated. See page H-37 for additional contact materials.
9
INSULATION RESISTANCE: 10 Ω min.
ELECTROSTATIC DISCHARGE (ESD) OPTION: All actuator
options: 15,000 V DC max. @ sea level, actuator to terminals.
TERMINAL SEAL: Epoxy.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
HARDWARE: Nut, Screw & Lockwasher: Stainless steel.
Standoff: Nylon standard, aluminum available, consult Customer
Service Center.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages H-26 through H-39. For additional options not shown in catalog, consult Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
E101 SP On-None-On
E103 SP On-Off-On
Contact Material
Actuator
J1 .531 long rocker
J2 Lever
J3 .906" long rocker
J11 Rocker with frame
J21 Lever with frame
J50 .362" long rocker
J60 Lever
B
K
P
Q
Gold
Terminations
E105 SP Mom.-Off-Mom.
E107 SP On-Off-Mom.
E108 SP On-None-Mom.
E201 DP On-None-On
E203 DP On-Off-On
E205 DP Mom.-Off-Mom.
E207 DP On-Off-Mom.
E208 DP On-None-Mom.
E211 DP On-On-On
Gold, tin-lead
Gold, matte tin
Silver
A
Right angle, PC thru-hole
AV2 Vertical right angle, PC thru-hole
C
Z
PC Thru-hole
Solder lug
M Silver, tin-lead
S
G
L
Silver, matte-tin
Gold over silver
Gold over silver, tin-lead
Gold over silver, matte-tin
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle, snap-in, PC thru-hole
V3 .460" high, V-bracket
V4 .630" high, V-bracket
V5 Vertical right angle, PC thru-hole
V6 .460" high, V-bracket
V7 .630" high, V-bracket
V8 .953" high, V-bracket
V21 .555" high, V-bracket, snap-in
V31 .460" high, V-bracket, snap-in
J90 Lever
R
Seal
E213 DP On-On-Mom.
E215 DP Mom.-On-Mom.
E301 3P On-None-On
E
Epoxy
Actuator Color
2
3
Black
Red
Frame Color
Black
NONE No frame color required
2
Metal Frame Color
(J11, J21 Actuators)
2
Black
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–26
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 2 POS. 3
CONNECTED TERMINALS
POS. 1
POS. 1
POS. 2
POS. 3
NO.
POLES
MODEL
NO.
C&K marking on opposite side
C&K marking on opposite side
N/A
SCHEMATIC
E101
ON
ON
NONE
OFF
ON
E103
E105
E107
E108
ON
SP
MOM.
ON
OFF
MOM.
MOM.
MOM.
2-3
OPEN
N/A
2-1
OFF
ON
NONE
SPDT
SPDT
Terminal Nos.
For Reference Only
Part number shown: E101J1ZBE2
E201
E203
E205
ON
ON
NONE
OFF
OFF
OFF
NONE
ON
ON
N/A
OPEN
N/A
ON
MOM.
ON
MOM.
MOM.
MOM.
ON
E207
DP
2-3,5-6
2-1,5-4
E208
ON
E211**
E213**
E215**
ON
ON
ON
MOM.
MOM.
2-3,5-4
DPDT
MOM.
ON
DPDT
Terminal Nos.
For Reference Only
Part number shown: E201J1ZBE2
MOM. = Momentary
** Wiring for 3-way switch, Hardware available seperately, see Technical Data section of this catalog.
All models
with all options when ordered with G, L, M or Q contact material.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–27
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 2 POS. 3
CONNECTED TERMINALS
POS. 1
POS. 1
POS. 2
POS. 3
NO.
POLES
MODEL
NO.
C&K marking on opposite side
C&K marking on opposite side
SCHEMATIC
3P
ON
NONE
ON
2-3,5-6,8-9
N/A
2-1,5-4,8-7
E301
3PDT
3PDT
Terminal Nos.
For Reference Only
Part number shown: E301J1ZBE2
MOM. = Momentary
All models
with all options when ordered with G, L, M or Q contact material.
** Wiring for 3-way switch, see Technical Data section of this catalog.
ACTUATOR COLOR
ACTUATOR–PANEL REAR MOUNT
ACTUATOR
OPTION
CODE
ACTUATOR
COLOR
J1 LEVER
2
3
BLACK
RED
Finish: Matte. Other colors, custom actuator mark-
ings and legends available, consult Customer
Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch thick
panel are supplied standard on switches with panel
mounting bracket. Internal o-ring actuator seal
standard. Actuators available separately, see
page H-37. Hardware available seperately, see
Technical Data section of this catalog. J1, J2 actua-
tors available with C, Z or Z3 terminations.
J2 LEVER
PANEL MOUNTING
J1 & J2 Actuators
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–28
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–REAR MOUNT
ACTUATOR
FRAME COLOR
J11 ROCKER WITH FRAME
OPTION
CODE
ACTUATOR
COLOR
2
3
BLACK
RED
OPTION
CODE
FRAME COLOR
BLACK
2
NOTE: This option has reduced anti-static capability.
J21 LEVER WITH FRAME
Actuator finish: Matte, frame finish: gloss.
Other colors, custom actuator markings
and legends available, consult Customer
Service Center.
NOTE: Internal o-ring actuator seal standard.
Actuators & frames available separately, see
page H-37. Hardware available seperately, see
Technical Data section of this catalog. N. J11
& J21 actuators available with C, Z & Z3 ter-
minations.
PANEL MOUNTING
NOTE: This option has reduced anti-static capability.
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J1 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
3
BLACK
RED
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
J2 LEVER
NOTE: Hardware: two each—mounting
screws, nuts, lockwashers and standoffs for
1/8 inch thick panel are supplied standard on
switches with panel mounting bracket. Internal
o-ring actuator seal standard. Actuators
available separately, see page H-37. Hardware
available seperately, see Technical Data sec-
tion of this catalog. J1, J2 actuators available
with A, A3, AV2, AV3, V2-V61 terminations.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–29
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
ACTUATOR COLOR
ACTUATOR–PC MOUNT
ACTUATOR
J3 ROCKER
OPTION
CODE
ACTUATOR
COLOR
2
3
BLACK
RED
J8 ROCKER
Finish: Matte. Other colors, custom actuator
markings and legends available, consult
Customer Service Center.
NOTE: Hardware: two each—mounting screws,
nuts, lockwashers and standoffs for 1/8 inch
thick panel are supplied standard on switches
with panel mounting bracket. Internal o-ring
actuator seal standard. Actuators available
separately, see page H-37. Hardware available
seperately, see Technical Data section of this
catalog.
J50 ROCKER
J3 actuators available with AV2, AV3
& V2-V61 terminations. Some permissible actua-
tor/termination combinations may lack clearance
between actuator and PC board, and care must
be exercised to accommodate this condition.
J50, J60 & J90 actuators available with
A, AV2, AV3, V2 – V61 terminations.
J60 LEVER
J90 LEVER
TERMINATIONS
Z
SOLDER LUG
C
PC THRU-HOLE
PC MOUNTING
Not available with K, L, P, S, & R or M contact
materials. Available actuators, see page H-37.
SPDT thru 3PDT
SPDT thru 3PDT
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–30
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
Z3 QUICK CONNECT
Not available with K, L, P, S, & R or M contact materials. Available
actuators, see pages H-28 thru H-30. Mating quick connector
available; order part number 530100000, page H-38.
SPDT thru 3PDT
A
RIGHT ANGLE, PC THRU-HOLE
E101J1ABE2
Horizontal Actuation
Actuator Shown In Pos. 1
SECTION A-A
SPDT
PC MOUNTING
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
NOTE: Not available with J3, J50, J60 and J90 actuators.
Available actuators, see pages H-28 thru H-30.
Terminal bend radii and lead-in manufacturing option.
NOTE: PC mounting pattern must clear
switch support leg.
A
RIGHT ANGLE, PC THRU-HOLE
E201J1ABE2
Actuator Shown In Pos. 1
Horizontal Actuation
SECTION A-A
DPDT
PC MOUNTING
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
NOTE: Not available with J3 actuator.
Available actuators, see pages H-28 and H-30.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–31
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
E301J1ABE2
Horizontal Actuation
3PDT
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
E101J1AV2BE2
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
SPDT
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–32
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
E201J1AV2BE2
Vertical Actuation
SECTION A-A
DPDT
Actuator Shown In Pos. 1
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
PC MOUNTING
.150" PITCH
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
E301J1AV2BE2
Vertical Actuation
SECTION A-A
3PDT
Actuator Shown In Pos. 1
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–33
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
E101J1V5BE2
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
SPDT
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
E201J1V5BE2
Vertical Actuation
SECTION A-A
DPDT
Actuator Shown In Pos. 1
NOTE: Terminal bend radii and lead-in manufacturing option.
Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–34
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
V6, V7, V8 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION
CODE
DIM ‘A’
E101J1__BE2
V21
V6
.555 (14, 10)
.460 (11, 68)
.630 (16, 00)
.953 (24, 21)
SPDT
V7
V8
NOTE: Available actuators, see pages H-28 and H-30.
V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
OPTION
CODE
DIM ‘A’
V21
V6
.555 (14, 10)
.460 (11, 68)
.630 (16, 00)
.953 (24, 21)
E201J1__BE2
DPDT
V7
V8
NOTE: Available actuators, see pages H-28 and H-30.
V7, V8 VERTICAL MOUNT, V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
OPTION
CODE
DIM ‘A’
E301J1__BE2
V21
V7
.555 (14, 10)
.630 (16, 00)
.953 (24, 21)
3PDT
V8
NOTE: Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–35
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
TERMINATIONS
V3, V4 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E101J1__BE2
SPDT
OPTION
CODE
DIM ‘A’
V3, V31
V4
.460 (11,68)
.630 (16,00)
NOTE: Available actuators, see pages H-28 and H-30.
V3, V4 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E201J1__BE2
DPDT
OPTION
CODE
DIM ‘A’
V3, V31
V4
.460 (11,68)
.630 (16,00)
NOTE: Available actuators, see pages H-28 and H-30.
V4 VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
E301J1__BE2
3PDT
OPTION
CODE
DIM ‘A’
.630 (16,00)
V41
NOTE: Available actuators, see pages H-28 and H-30.
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–36
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
CONTACT MATERIAL
RoHS
COMPLIANT *
RoHS
COMPATIBLE *
OPTION
CODE
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
1
GOLD
YES
YES
YES
YES
YES
YES
YES
YES
YES
B
K
P
Q
M
S
G
L
YES
NO
LOW LEVEL/
DRY CIRCUIT
1
6
GOLD
TIN-LEAD
0.4 VA MAX. @ 20 V AC OR DC MAX.
7
MATTE-TIN
YES
YES
NO
5
SILVER
E1XX & E2XX MODELS: 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @
250 V AC.
E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
6
4,5
TIN-LEAD
SILVER
POWER
7
MATTE-TIN
YES
YES
NO
3
GOLD
E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR
7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @
125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
GOLD OVER
6
LOW LEVEL/DRY
TIN-LEAD
2,3
SILVER
CIRCUIT OR POWER
7
R
YES
MATTE-TIN
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
END CONTACTS: Coin silver, with gold plate over nickel plate.
NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
2
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
All models
with all options when ordered with G, L, M, Q, S & R contact material.
B contact material standard with all terminations.
4
5
END CONTACTS: Coin silver, silver plated.
K, L , M, P R & S contact materials not available with Z terminations.
CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver
plate. Or copper alloy, silver plated.
6
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
7
TERMINALS: Copper alloy, with matte-tin over nickel plate.
SEAL
E
EPOXY SEAL
AVAILABLE HARDWARE
J2, J21 Actuators
J3 Actuator
J1, J11 Actuators
PART NO.
PART NO.
PART NO.
760502263 BLACK
760503000 RED
766602263 BLACK
766603000 RED
776A02263 BLACK
776A03000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
J90 Actuator
J50 Actuator
J60 Actuator
PART NO.
PART NO.
PART NO.
598002263 BLACK
598003000 RED
775A02263 BLACK
775A03000 RED
613802263 BLACK
598103000 RED
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
NOTE: Additional nuts, screws and lockwashers available separately, see Technical
Data section of this catalog. Other colors available, consult Customer Service Center.
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–37
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
AVAILABLE HARDWARE
Fits Z3 Termination
female connector
Frame for J11, J21 Actuators
J50, J60 & J90 Actuators
MATTE
GLOSS
PART NO.
PART NO.
486702000
PART NO.
764500746 BLACK ENAMEL
764601106 RETAINING SPRING
486802000 BLACK
PART NO.
Material: Nylon
Finish: Matte or Gloss
Material: Spring Steel
530100000
Available in loose pieces.
NOTE: Additional nuts, screws and lockwashers available separately, see Technical
Data section of this catalog. Other colors available, consult Customer Service Center.
TYPICAL APPLICATION
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame.
Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
J1 & J2 Actuators
.047” (1,19) PANEL THK.
PART NO.
.062” (1,57) PANEL THK.
PART NO.
.090” (2,29) PANEL THK.
PART NO.
.125” (3,18) PANEL THK.
PART NO.
452902263
452903000
452702263
452703000
452802263
452803000
452602263 BLACK
452603000 RED
J50, J60 & J90 Actuators
.047” (1,19) PANEL THK.
PART NO.
.062” (1,57) PANEL THK.
PART NO.
.090” (2,29) PANEL THK.
PART NO.
.125” (3,18) PANEL THK.
PART NO.
432502263
432503000
432602263
432603000
432702263
432703000
432802263 BLACK
432803000 RED
PANEL MOUNTING
For part numbers
4529xxxxx, 4527xxxxx,
4528xxxxx, 4526xxxxx
For part numbers
4325xxxxx, 4326xxxxx
For part numbers
4327xxxxx, 4328xxxxx
.005 R. MAX.
(0,13) TYP.
.005 R.
(0,13)
MAX. TYP.
.005 R.
(0,13)
MAX. TYP.
.495 – .505
(12,57 – 12,83)
.495 – .505
(12,57 – 12,83)
.495 – .505
(12,57 – 12,83)
.797 – .803
(20,24 – 20,40)
.595 – .605
(15,11 – 15,37)
.620 – .625
(15,75 – 15,88)
Dimensions are shown: Inch (mm)
H
Specifications and dimensions subject to change
www.ittcannon.com
H–38
C&K E Series
Sealed Miniature Rocker and Lever Handle Switches
AVAILABLE HARDWARE
Panel Inserts
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
Will fit separate snap-in frames for
J50, J60, J90 actuators.
PANEL INSERT
BLANK PANEL INSERT
WITH HOLE FOR LED
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894902000
894903000
476602000 BLACK
476603000 RED
Special colors, custom markings available, consult Customer Service Center.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
www.ittcannon.com
H–39
E207J1AGE32 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
E207J1AK22 | ITT | Sealed Miniature Rocker and Lever Handle Switches | 获取价格 | |
E207J1AK222 | ITT | Sealed Miniature Rocker and Lever Handle Switches | 获取价格 | |
E207J1AK32 | ITT | Sealed Miniature Rocker and Lever Handle Switches | 获取价格 | |
E207J1AK322 | ITT | Sealed Miniature Rocker and Lever Handle Switches | 获取价格 | |
E207J1AKE2 | ITT | ROCKER SWITCH, DPDT, LATCHED AND MOMENTARY, 0.02A, 20VDC, THROUGH HOLE-RIGHT ANGLE | 获取价格 | |
E207J1AKE22 | ITT | ROCKER SWITCH, DPDT, LATCHED AND MOMENTARY, 0.02A, 20VDC, THROUGH HOLE-RIGHT ANGLE | 获取价格 | |
E207J1AKE3 | ITT | ROCKER SWITCH, DPDT, LATCHED AND MOMENTARY, 0.02A, 20VDC, THROUGH HOLE-RIGHT ANGLE | 获取价格 | |
E207J1ALE2 | ITT | Rocker Switch, DPDT, On-off-(on), Latched And Momentary, 7.5A, 28VDC, 8 PCB Hole Cnt, Solder Terminal, Long Rocker Actuator, Through Hole-right Angle | 获取价格 | |
E207J1ALE3 | ITT | Rocker Switch, DPDT, Latched And Momentary, 7.5A, 28VDC, Solder Terminal, Long Rocker Actuator, Through Hole-right Angle | 获取价格 | |
E207J1ALE32 | ITT | Rocker Switch, DPDT, Latched And Momentary, 7.5A, 28VDC, Solder Terminal, Long Rocker Actuator, Through Hole-right Angle | 获取价格 |
E207J1AGE32 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6