EP11RD1AVSE [ITT]
Pushbutton Switch, SPST, Momentary, 1A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT;型号: | EP11RD1AVSE |
厂家: | ITT Cannon |
描述: | Pushbutton Switch, SPST, Momentary, 1A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT |
文件: | 总6页 (文件大小:498K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
EP Series
Sealed Tiny Pushbutton Switches
Features/Benefits
Typical Applications
A
• Sealed against solder &
• Telecommunications and
cleaning processes
networking equipment
• Thru-hole and surface mount models
• Computers and peripherals
• Instrumentation and controls
• Snap-fitting actuator accepts
standard caps
• Tape & reel packaging available
• RoHS compliant models available
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @
CASE & BUSHING: High temperature material, glass filled nylon 4/6,
flame retardant, heat stabilized (UL 94V-0) on SMT models; glass
filled nylon 6/6 on PC Through Hole models.
20 V AC or DC max. See page A-13 for additional ratings.
ELECTRICAL LIFE: EP11, EP21 models: 60,000 make-and-break
cycles at full load. EP12 models: 30,000 cycles.
PLUNGER: Thermoplastic polyester or glass filled nylon (UL 94V-0),
with internal o-ring seal. SA surface mount: High temperature
material, glass filled LCP (UL 94V-0).
CONTACT RESISTANCE: Below 20 mΩ typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
9
SWITCH SUPPORT: Brass, matte-tin plated.
INSULATION RESISTANCE: 10 Ω min.
CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. See page A-13 for additional
contact materials.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B, P, S, R or G contact material are RoHS compliant.
DEGREE OF PROTECTION: IP57; Protection against harmful dust
deposit, full-scale voltage protection, temporary immersion.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
PACKAGING: Surface mount switches standard in anti-static
tape and reel packaging per EIA 481-3, see page A-14 for
drawings and reel information. Tape and cover strip are
conductive for use near statically sensitive components,
consult Customer Service Center.
CAUTION: PC mounting layouts and pads as shown are designed to be compatible with the
latest equipment and reflow techniques. Care should be taken in the design and location of
PC lands to suit individual needs. Orientation relative to reflow direction may significantly
impact solder joint integrity.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-10 thru A-14. For additional options not shown in catalog, consult Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Switch Function
EP11 SPST Off-Mom.
EP12 SPDT On-Mom.
EP21 DPST Off-Mom.
Plunger
S
.215" high
S1 .110" high
S2 .465" high
FP Flush
Seal
Epoxy
R
Snap-fitting, .215 high
E
Bushing
D1 Unthreaded
Terminations
Contact Material
A
C
Right angle, PC thru-hole
PC Thru-hole
B
P
Q
S
G
R
Gold
Gold, matte-tin
Silver
Silver, matte-tin
Gold over silver
Gold over silver, matte tin
AV Vertical right angle, PC thru-hole
AV3 Vertical right angle, snap-in, PC thru-hole
SA Right angle, surface mount
SA1 Right angle, surface mount rear facing
V3 Vertical mount, v-bracket
V31 Vertical mount, v-bracket, snap-in
(EP11 & EP12 only)
W
Wire wrap
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A–9
EP Series
Sealed Tiny Pushbutton Switches
SWITCH FUNCTION
A
SWITCH FUNCTION
POS. 1 POS. 2
CONNECTED TERMINALS
POS. 1 POS. 2
NO.
POLES
MODEL
NO.
C&K marking on opposite side
C&K marking on opposite side
SCHEMATIC
EP11
EP12
OFF
ON
MOM.
MOM.
OPEN
2-1
1-3
2-3
SPST
SPDT
SP
SPDT
Omit terminal 2 for
EP11 models.
Terminal Nos.
For Reference Only
Part number shown: EP12SD1CBE
DP
OFF
MOM.
OPEN
1-3,4-6
EP21
DPST
DPST
Terminal Nos.
For Reference Only
Part number shown: EP21SD1CBE
MOM. = Momentary
All models
with all options when ordered with G, L, M Q, R or S contact material.
PLUNGER
S
.215" HIGH
S1 .110" HIGH
S2 .465" HIGH
FP FLUSH PLUNGER
R
SNAP-FITTING
S1& S2 actuators are not available with EP12 & EP21 models or SA1 termination style.
FP & R actuators are not available with EP21 model or SA1 termination style.
NOTE: Caps available for plunger options, see page A-14.
BUSHING
D1 UNTHREADED
NOTE: Internal actuator o-ring standard.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A–10
EP Series
Sealed Tiny Pushbutton Switches
TERMINATIONS
A
C
PC THRU-HOLE
W
WIRE WRAP
SP
DP
SP
DP
PC MOUNTING
EP11 - Omit
center hole.
SP and DP
SP and DP
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
EP12SD1ABE
SPDT
EP11 Models:
omit terminal 2.
EP11 Models:
omit thru-hole 2.
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
EP21SD1ABE
DPST
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
EP12SD1AVBE
SPDT
EP11 Models:
omit hole 2.
EP11 Models:
omit terminal 2.
NOTE: Terminal bend radii and lead-in manufacturing option.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A–11
EP Series
Sealed Tiny Pushbutton Switches
TERMINATIONS
A
AV VERTICAL RIGHT ANGLE, THRU-HOLE
PC MOUNTING
EP21SD1AVBE
DPST
NOTE: Terminal bend radii and lead-in manufacturing option.
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
PC MOUNTING
EP12SD1AV3BE
SPST
EP11 Models:
omit hole 2.
SA RIGHT ANGLE, SURFACE MOUNT
PC MOUNTING
.320
(8,13)
EP12SD1SAPE
SPDT
.410 MAX
(10,41)
EP11 Models:
omit pad 2.
Available with P contact material only.
Not Available on DPST models.
EP11 Models:
omit terminal 2.
PC MOUNTING
SA1 RIGHT ANGLE, SURFACE MOUNT
.100
(2,54)
.276
(7,0)
.320
(8,13)
.272
(6,90)
.181
(4,60)
.041
(1,04)
.071 TYP.
(1,80)
.220
(5,60)
.059
(1,50)
.313
(7,95)
.059
(1,50)
YY/WW
0.4VA MAX
.082 TYP.
(2,10)
EPOXY SEAL
.160
(4,06)
TERMINAL NOS.
FOR REF. ONLY
3
.032 TYP.
(0,80)
.400
(10,16)
1
2
.100
EP12SD1SA1BE
SPDT
.200
(5,08)
(2,54)
.200
.020 TYP
(0,51)
(5,08)
.051
(1,30)
.325
(8,26)
.121
(3,07)
SA1 is only available with B contact materials option + S plunger.
Not Available on DPST models.
.217
(5,51)
.234
Third Angle
Projection
(5,94)
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A–12
EP Series
Sealed Tiny Pushbutton Switches
TERMINATIONS
A
V3 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
EP11 Models:
omit centerhole.
EP12SD1V3BE
SPDT
V31 SNAP-IN
EP11 Models:
omit terminal 2.
V3 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
EP21SD1V3BE
DPST
CONTACT MATERIAL
OPTION
CODE
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
B
P
Q
S
G
R
1
GOLD
1
0.4 VA MAX. @ 20 V AC OR DC MAX.
LOW LEVEL/DRY CIRCUIT
GOLD
6
6
6
MATTE-TIN
5
SILVER
4,5
SILVER
1 AMP @ 120 V AC OR 28 V DC.
POWER
MATTE-TIN
3
GOLD
0.4 VA MAX @ 20 V AC OR DC MAX. OR
1 AMP @ 120 V AC OR 28 V DC.
LOW LEVEL/DRY
2,3
GOLD OVER SILVER
MATTE-TIN
CIRCUIT OR POWER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
6
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
END CONTACTS: Coin silver, with gold plate over nickel plate.
TERMINALS: Copper alloy, with matte tin over nickel plate.
NOTE: Any models supplied with Q, B P, S ,R or G contact material are RoHS compliant.
All models with all options when ordered with G, L, M, S, R or Q contact material.
2
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4
5
END CONTACTS: Coin silver, silver plated.
K, L and M options represent Non RoHS tin lead product and are not recommended for new
designs. For additional information please contact Customer Service.
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
SEAL
E
EPOXY SEAL
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A–13
EP Series
Sealed Tiny Pushbutton Switches
AVAILABLE HARDWARE
A
Cap
Cap
Cap
Cap
Compatible with snap-fitting plungers
EP11 & EP12 Models. R option only.
Compatible with snap-fitting plungers
EP11 & EP12 Models. R option only.
.200 DIA.
(5,08È)
.310 DIA.
(7,87È)
.152
(3,86)
.155
(3,94)
.080
(2,03)
.100
(2,54)
PART NO.
PART NO.
PART NO.
PART NO.
508101000 WHITE
508102000 BLACK
508103000 RED
465801000 WHITE
465802000 BLACK
465803000 RED
585A01000 WHITE
585A02000 BLACK
585A03000 RED
785A01000 WHITE
785A02000 BLACK
785A03000 RED
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Not for use on S1 plunger
Not for use on S1 plunger
NOTE: Other colors available, consult Customer Service Center.
TAPE & REEL
For part number EPXX-SA
REEL INFORMATION
OUTSIDE DIAMETER
PILOT HOLE
13.00 (330,0)
.512 (13,0)
600
QUANTITY PER REEL
EP11SDISAPE
EP11FPDISAPE
For part number EPXX-SA1
0.630
(16,00)
0.157
(4,0)
0.297
(7,55)
0.059
(1,50)
0.079
(2,0)
0.014
(0,35)
0.069
(1,75)
0.795
(20,2)
REEL INFORMATION
0.996
(25,30)
1.732
(44,0)
OUTSIDE DIAMETER
PILOT HOLE
13.00 (330,0)
.795 (20,20)
500
ITT
YY/WW
0.4VA MAX
QUANTITY PER REEL
Third Angle
Projection
FEED DIRECTION
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
A–14
相关型号:
EP11RD1CGE
Pushbutton Switch, SPST, Momentary, 1A, 28VDC, Solder Terminal, Through Hole-straight, ROHS COMPLIANT
ITT
EP11RD1CRE
Pushbutton Switch, SPST, Momentary, 1A, 28VDC, Solder Terminal, Through Hole-straight, ROHS COMPLIANT
ITT
EP11RD1CSE
Pushbutton Switch, SPST, Momentary, 1A, 28VDC, Solder Terminal, Through Hole-straight, ROHS COMPLIANT
ITT
©2020 ICPDF网 联系我们和版权申明