HBS7KAB6SP011C [ITT]
Single Pole Standard Precision Snap-acting Switches; 单刀标准的精密微动开关型号: | HBS7KAB6SP011C |
厂家: | ITT Cannon |
描述: | Single Pole Standard Precision Snap-acting Switches |
文件: | 总7页 (文件大小:290K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
C&K HB Series
Single Pole Standard Precision Snap-acting Switches
Features/Benefits
Typical Applications
• Low differential travel, high repeatability
• Long life—150,000 cycles typical
• Single and double pole circuitry
• Sealed actuator and case
• Thermostats
• Motors
• Industrial controls
Models Available
Specifications
Materials
CONTACT RATING: From low level* to 20 AMPS @ 480 V AC;
SWITCH HOUSING: Heat resistant/electrical grade phenolic.
INSERTS: Brass alloy.
see ELECTRICAL RATING option section for complete listings.
ELECTRICAL LIFE: 150,000 cycles at 20 AMPS @ 250 V AC.
consult Customer Service Center for typical life at other ratings.
ACTUATOR BUTTON: Moisture resistant phenolic.
SPRING: Copper alloy.
INSULATION RESISTANCE: 1,000 M ohm min.
PIVOT: Brass alloy.
DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –67ºF to 302ºF (–55ºC to 150ºC).
MOVABLE CONTACTS: Gold alloy for ratings 1 AMP or less.
Fine silver for ratings greater than 1 AMP and motor load
ratings less than 1/2 HP @ 125 V AC. Precious metal alloy
for motor load ratings 1/2 HP @ 125 V AC or greater.
OPERATING FORCE: From 4 oz. to 26 oz. max. at actuator
button available.
MOUNTING SCREWS: Torque 3 in/lbs max.
(Note: Exceeding 3 in/lbs torque may change operating
characteristics and increase the possibility of cracking
switch case).
STATIONARY CONTACTS: Gold alloy for ratings 1 AMP or less.
Fine silver welded to copper base for ratings greater than
1 AMP and motor load ratings less than 1/2 HP @ 125 V AC.
Precious metal alloy on copper base for motor load
ratings 1/2 HP @ 125 V AC or greater.
K
TERMINAL SCREWS: Torque 4 in/lbs max.
TERMINALS: Brass alloy, bright tin plated.
PANEL MOUNTING BUSHING: Torque 4-6 in/lbs max.
DEGREE OF PROTECTION: IP65; Dust-proof, water splash and
dew condensation.
NOTE: For the latest information regarding RoHS compliance, please go
to: www.ittcannon.com/rohs.
* Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @
20 V AC or DC max.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages K-38 thru K-43. For additional options not shown in catalog, consult Customer Service Center.
H
B
S
S
C
Series
HB Precision Snap-acting Switches
Operating Force
KG 18 oz./510 grams
GF 4 oz./113 grams
KA 9 oz./255 grams
KC 13 oz./368 grams
KH 20 oz./567 grams
PB 26 oz./737 grams
Mounting Style
Circuitry
C SPDT
Function
S
Standard
S
SP
Contact Separation
2
1
4
7
.020"
.010"
.040"
.070"
Electrical Rating
B4 20 A, 125, 250, 480 V AC;
Actuator
0.25 A, 250 V DC; 0.5 A, 125 V DC
P0 Pin plunger
A0 Lever roller
D0 Stub plunger
F0 Reverse acting lever roller
J0 High overtravel plunger
R5 Perpendicular roller plunger
T0 Lever
A2 5 A, 125, 250 V AC
Terminations
11 Flat base, solder, 4-40 screws
41 Flat base, .250" quick connect
B6 20 A, 125, 250, 480 V AC; 0.25 A,
250 V DC; 0.5 A, 125 V DC; 3/4 HP,
125 V AC; 1 1/2 HP, 25O V AC
F5 1 A,125 V AC; 1 A, 3O V DC
F9 22 A, 125, 277 V AC; 15 A, 480 V AC;
1/4 HP, 125 V AC; 1/2 HP, 250 V AC
X3 20 A, 125, 250, 480 V AC; 0.25 A,
250 V DC; 0.5 A, 125 V DC; 15(10) A,
380 V~ 185 +++ µ (VDE)
55 Step base, cup washers, 6-32 screws
TS Sealed Lever
Y0 Reverse acting lever
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
K–37
C&K HB Series
Single Pole Standard Precision Snap-acting Switches
Sealed Actuator and Case
To provide reliable service under environmental conditions that might damage standard precision switches, various HB Series
switch models are sealed against the entrance of airborne contaminants and/or splashing liquids. The clearance between
the operating plunger and the cover is sealed with a silicone boot and the base cover joint is sealed with an epoxy adhesive.
These models are designed to meet requirements of IP65 (dust proof, water splash and dew condensation). For additional
information on sealed switches, consult our Customer Service Center.
SERIES
HB PRECISION SNAP-ACTING SWITCHES
FUNCTION
S
SINGLE POLE SWITCH
OPER. POS.
.625 .ꢀ15
(15,88 ꢀ,38)
K
Single Pole
NOTE: To select switching function, see CIRCUITRY section, page K-42.
CONTACT SEPARATION
DIFFERENTIAL TRAVEL SPECIFICATION LIMITS
FOR VARIOUS CONTACT SEPARATIONS
.0004
.0002
OPTION
CODE
NOMINAL CONTACT
SEPARATION (in./mm)
INCH
.020
(0,51)
2
1
4
7
CONTACT
Switches with 1 AMP rating (option
code ‘F5’) are available only with
.020 contact separation (option ‘2’).
0
.001
.002
.003
.004
.005
SEPARATION
.010
(0,25)
1
2
4
7
Switches with 1/2 HP, 125 V AC rating
or greater (option codes ‘B5 and B6’)
are not available with .010 contact
separation (option code ‘1’).
.040
(1,02)
.070
(1,78)
.0015
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
K–38
C&K HB Series
Single Pole Standard Precision Snap-acting Switches
OPERATING FORCE
OPERATING FORCE SPECIFICATION LIMITS
FOR VARIOUS CONTACT SEPARATIONS
OPTION
CODE
MAXIMUM OPERATING
FORCE (OZ./GRAMS)
STANDARD CONTACT
SEPARATION (inch)
OUNCES
CONTACT
18
510
SEPARATION
.020
.010
.010
.020
.040
.070
KG
GF
KA
KC
KH
PB
4
7
9
13 14
18 20
26
30
4
115
.010
.020
.040
.070
9
255
13
370
20
570
STANDARD RANGE
MAXIMUM LIMITS AVAILABLE
26
740
NOTE: All listed differential travel characteristics are based on standard operating force
andcontact separation. For any other force or contact separation, consult Customer
Service Center.
Operating force varies with actuator option, see ACTUATOR option section.
ELECTRICAL RATING
RoHS
COMPLIANT*
MOVABLE
CONTACT
STATIONARY
CONTACT
OPTION
CODE
RoHS
COMPATIBLE*
ELECTRICAL RATING
K
20 AMPS @ 125, 250 & 480 V AC; 0.25 AMPS @ 250 V DC; 0.5 AMPS @
B4
A2
B6
F5
F9
Yes
Yes
Fine silver welded to
copper base.
125 V DC (UL/CSA).
Fine silver.
Yes
Yes
Yes
5 AMPS @ 125 & 250 V AC (UL/CSA).
Yes
Yes
Yes
20 AMPS @ 125, 250 & 480 V AC; 0.25 AMP @ 250 V DC; 0.5 AMP @
125 V DC; 3/4 HP @ 125 V AC; 1 1/2 HP @ 250 V AC (UL/CSA).
Precious metal alloy.
Gold alloy.
Precious metal alloy.
Gold alloy.
Low level* to 1 AMP @ 125 V AC; 1 AMP @ 30 V DC (UL/CSA).
Fine silver welded to
copper base.
22 AMPS @ 125 & 277 V AC; 15 AMPS @ 480 V AC; 1/4 HP @ 125 V AC;
1/2 HP @ 250 V AC; 277 V AC (UL/CSA).
Yes
Yes
Fine silver.
Yes
Yes
Fine silver welded to
copper base.
20 AMPS @ 125, 250, 480 V AC; 0.25 AMP @ 250 V DC, 0.5 AMP @
m (VDE).
125 V DC (UL/CSA); 15 (10) AMPS @ 380 V~ T85 50E3
X3
Fine silver.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
AVAILABLE COMBINATIONS
OPERATING FORCE (oz.)
EUROPEAN SYMBOLS
4
GF
9
KA
13
KC
18
KG
20
KH
26
PB
ELECTRICAL
RATING
Microgap construction
(less than 4 mm).
m
~
Alternating current.
A2
•
x
x
•
•
x
•
•
x
•
•
•
•
•
•
•
•
•
B4
B6
F5
F9
X3
Maximum rated use temperature.
Cycles over 50,000 at rated current.
T__
50E3
x
x
x
x
x
•
•
x
•
•
•
•
•
•
•
•
•
•
First number represents resistive
rating; second number represents
inductive (motor) rating.
10(3)
• AVAILABLE
x NOT AVAILABLE
All models
with all options,
also available.
Consult Customer Service center for availability and delivery of nonstandard ratings.
* Low Level=conditions where no arcing occurs during switching,
i.e., 0.4 VA max. @ 20 V AC or DC max.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
K–39
C&K HB Series
Single Pole Standard Precision Snap-acting Switches
MOUNTING STYLE
S Standard
NOTE: Mounting holes will accept pins or screws of .139 dia. (3,53) max. on
1.000 .002 (25,4 0,05) centers.
NOTE: Torque mounting screws 3 inlbs max.
ACTUATOR
A
NO.
D
D
A
C
OPTION CODE
POLES FIG. DIM. A
DIM. C
DIM. B
C
DIM. D
.86
(21,8)
1.120 .060
(28,45 1,52)
.38 dia.
(9,7Ø)
1.03
(26,2)
SP
SP
1
3
A0
.92
(23,4)
.844 .020
(21,44 0,51)
B
—
—
D0
F0
B
.09
(2,3)
1.120 .050
(28,45 1,27)
.38 dia.
(9,7Ø)
.74
(18,8)
SP
SP
SP
SP
SP
SP
2
4
5
6
7
7
.86
(21,8)
.860 .030
(21,84 0,76)
.64 dia.
(16,3Ø)
0.33
(8,40)
K
J0
FIG.
1
FIG. 2
Lever Roller
Lever Roller
.92
(23,4)
.625 .010
(15,88 0,25)
—
—
P0
RS
T0
.92
(23,4)
.62
(15,7)
.50 dia.
(12,7Ø)
0.61
(15,5)
A
1.310
(33,27)
.720 .060
(18,28 1,52)
1.03 dia.
(26,2Ø))
—
—
1.47
(37,3)
.720 .060
(18,28 1,52)
1.03 dia.
(26,2Ø)
B
TS*
Y0
.05
(1,3)
.720 .030
(18,29 0,76)
.74 dia.
(18,8Ø)
2.65
(6,73)
SP
8
FIG. 3
Stub Plunger
* Actuators sealed against the entrance of airborne
contaminants and/or splashing liquids.
C
D
A
A
A
B
B? .040
B
D
FIG. 5
Pin Plunger
PANEL MOUNTING
C
4
FIG.
Plunger
FIG. 6
Perpendicular Roller Plunger
.50 DIA.
(12,70?)
D
C
A
C
A
B
B
FIG. 8
Reverse Acting Lever
7
FIG.
Lever
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
K–40
C&K HB Series
Single Pole Standard Precision Snap-acting Switches
ACTUATOR
ACTUATOR
* SEALED ACTUATOR
OPTION
CODE
A0
D0
F0
J0
P0
R5
T0
Y0
TS
4
115
GF
KA
KC
KG
KH
PB
GF
KA
KC
KG
KH
PB
—
—
—
—
—
—
—
—
3
85
9.5
269
10
284
10
284
9
255
10
284
2
60
10
284
2
56
MAXIMUM
OPERATING
FORCE
13
370
10
284
13
370
13
370
13
370
10
284
—
—
—
3.5
100
18
510
2.5
71
2.5
71
—
—
—
—
—
(OZ./GRAMS)
4
115
20
570
20
570
20
570
20
570
20
570
3
85
20
570
3
85
4.5
130
26
740
20
570
26
740
26
740
26
740
3.5
100
20
570
3.5
100
1
28
—
—
—
—
—
—
—
—
K
.75
21
4
110
3
85
4
110
4
110
4
110
.5
14
3
85
.5
14
MAXIMUM
RELEASE
4
110
3
85
4
110
4
110
4
110
3
85
—
—
—
FORCE
.75
21
4
110
.5
14
.5
14
—
—
—
—
—
(OZ./GRAMS)
.75
21
4
110
3
85
4
110
4
110
4
110
.5
14
3
85
.5
14
.75
21
4
110
3
85
4
110
4
110
4
110
.5
14
3
85
.5
14
NOTE: For basic switch operating forces, see page K-39.
* Actuators sealed against the entrance of airborne
contaminants and/or splashing liquids.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
K–41
C&K HB Series
Single Pole Standard Precision Snap-acting Switches
ACTUATOR
ACTUATOR
* SEALED ACTUATOR
OPTION
CODE
A0
D0
F0
J0
—
—
P0
R5
—
—
T0
Y0
TS
.0005
(0,013)
GF
KA
KC
KG
KH
PB
GF
KA
KC
KG
KH
PB
GF
KA
KC
KG
KH
PB
—
—
—
—
—
—
.020
.0005
.005
.0005
(0,013)
.047
(1,19)
.005
(0,13)
.047
(1,19)
(0,51) (0,013) (0,13)
MAXIMUM
DIFFERENTIAL
TRAVEL
.002
(0,05)
.008
(0,20)
.002
(0,05)
.009
(0,23)
—
—
—
—
—
—
—
—
—
—
—
—
—
.062
(1,57)
.003
(0,08)
.078
(1,98)
.078
(1,98)
—
—
—
(IN/MM)
.080
(2,03)
.003
(0,76)
.020
(0,51)
.003
(0,08)
.093
(2,36)
.020
(0,51)
.093
(2,36)
.125
(3,18)
.007
(0,18)
.030
(0,76)
.005
(0,13)
.156
(3,96)
.031
(0,79)
.156
(3,96)
.020
(0,51)
—
—
—
—
—
—
.312
(7,92)
.020
(0,51)
0.8
(2,0)
.015
(0,38)
.015
(0,38)
.015
(0,38)
.38
(9,7)
.09
(2,3)
.38
(9,7)
.020
(0,51)
0.8
(2,0)
.020
(0,51)
.020
(0,51)
.020
(0,51)
.09
(2,3)
MAXIMUM
PRETRAVEL
(IN/MM)
—
—
—
.312
(7,92)
.025
(0,64)
.38
(9,7)
.38
(9,7)
—
—
—
—
—
.38
(9,7)
.025
(0,64)
0.9
(2,3)
.025
(0,64)
.025
(0,64)
.025
(0,64)
.38
(9,7)
0.9
(2,3)
.38
(9,7)
K
.38
(9,7)
.030
(0,76)
0.9
(2,3)
.030
(0,76)
.030
(0,76)
.030
(0,76)
.38
(9,7)
0.9
(2,3)
.38
(9,7)
.005
(0,13)
—
—
—
—
—
—
—
—
.156
(3,96)
.055
(1,40)
.06
(1,5)
.22
(5,6)
.005
(0,13)
.141
(3,58)
.19
(4,8)
.06
(1,5)
.19
(4,8)
.055
(1,40)
0.9
(2,3)
.22
(5,6)
.005
(0,13)
.141
(3,58)
0.9
(2,3)
MINIMUM
OVERTRAVEL
(IN/MM)
—
—
—
.156
(3,96)
.005
(0,13)
.19
(4,8)
.19
(4,8)
—
—
—
—
—
.156
(3,96)
.055
(1,40)
0.9
(2,3)
.22
(5,6)
.005
(0,13)
.141
(3,58)
.19
(4,8)
0.9
(2,3)
.19
(4,8)
.156
(3,96)
.055
(1,40)
0.9
(2,3)
.22
(5,6)
.005
(0,13)
.141
(3,58)
.19
(4,8)
0.9
(2,3)
.19
(4,8)
NOTE: For basic switch operating forces, see page K-39.
* Actuators sealed against the entrance of airborne
contaminants and/or splashing liquids.
TERMINATIONS
11 FLAT BASE, SOLDER TERMINALS AND 4-40 SCREWS
41 FLAT BASE, .250" QUICK CONNECT TERMINALS
NOTE: Switches with flat base option have molded ribs that provide increased creep distance.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
K–42
C&K HB Series
Single Pole Standard Precision Snap-acting Switches
TERMINATIONS
55 STEP BASE, 6-32 SCREWS AND CUP WASHERS
NOTE: Switches with step base option provide wide
electrical clearance for screw terminal options.
K
CIRCUITRY
C
DT (Double Throw, Normally Closed & Normally Open)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
K–43
相关型号:
©2020 ICPDF网 联系我们和版权申明