L212111TS10Q2 概述
Miniature Slide Switches 微型滑动开关
L212111TS10Q2 数据手册
通过下载L212111TS10Q2数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载C&K L Series
Miniature Slide Switches
Features/Benefits
• Positive detent
• Enclosed housing
Typical Applications
• Communications equipment
• Lighting devices
• Maintained and momentary functions
• PC and panel mounting
• RoHS compliant
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (LX0X, LX1X Models): 4 AMPS HOUSING: 6/6 nylon (UL94V-2), black.
J
@ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @
125 V DC (UL/CSA). See page I-23 for additional ratings.
ACTUATOR: 6/6 nylon (UL94V-2), black.
‘13’ actuator, natural (standard).
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACTS: Q contact material: Copper, silver plated. See page
J-22 for additional contact materials.
CONTACT RESISTANCE: Below 10 m Ω typ. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
TERMINALS: Q contact material: Copper, silver plated. See page
J-22 for additional contact materials.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30ºC to +65ºC
STORAGE TEMPERATURE: -30ºC to +85ºC
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J-19 through J-23. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
L202 DPDT
L203 DP3T
L101 SPST
L102 SPDT
L103 SP3T
L104 SP4T
Actuator
01 .200" high
02 .335" high
03 .375" high
05 .312" high
11 .100" high
L112 SPDT, mom.
L113 SP3T, mom. to one end
L123 SP3T, mom. to both ends
L201 DPST
L204 DP4T
L212 DPDT, mom.
12 Screwdriver slot
13 Plunger without cap
14 Plunger with .200" dia. cap
15 Plunger with .310" dia. cap
17 Plunger with .458" dia. cap
19 Plunger with .590" dia. cap
Detent
1
2
With detent
Without detent
Mounting Style
MS PC Thru-hole
MA Right angle, PC thru-hole
ML Right angle, PC thru-hole
MV Right angle, PC thru-hole
SS Panel with mounting ears
TS Panel with integral mounting ears
Terminations
02 PC Thru-hole
01 Solder lug with notch
03 Solder lug with hole
04 PC Thru-hole
10 PC Thru-hole
06 Wire wrap
Contact Material
Q
B
G
Silver
Gold
Gold over silver
12 PC Thru-hole
Seal
NONE No seal
E
Epoxy seal
Cap Color
Black
NONE No cap
2
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–18
C&K L Series
Miniature Slide Switches
SWITCH AND LOCK FUNCTION
AVAILABLE
MOUNTING
STYLES
AVAILABLE
MOUNTING
STYLES
NO.
POLES
MODEL
NO.
NO.
POLES
MODEL
NO.
SWITCH
FUNCTION
SWITCH FUNCTION
SPST
SCHEMATIC
SCHEMATIC
L101
L102
L112
L103
L113
L123
L104
ML, MS, SS
ML, MS, SS
ML,MS,MV,SS
MA, MS, TS
MA, MS, TS
MA, MS, TS
MS
L201
DPST
MA, MS, SS
MA, MS, SS
MV
SPDT
1
2
3
L202
L212
L203
L204
DPDT
SPDT-MOM.
SP
SP3T
DP
DPDT-MOM.
DP3T
SP3T-MOM. to one end
SP3T-MOM. to both ends
SP4T
J
MS, TS
MS
DP4T
NOTE: and MOM. in table indicates momentary action.
All models with all options when ordered with ‘G’ or ‘Q’ contact material.
Models with ‘01’ termination option
only.
Contacts make on side actuator thrown.
CAP COLOR
ACTUATOR
ACTUATOR
ACTUATOR OPTIONS FOR ‘MS, MA, ML, SS, & TS’ MOUNTING STYLES
01 .200" HIGH
02 .335" HIGH
03 .375" HIGH
05 .312" HIGH
11 .100" HIGH
12 SCREWDRIVER SLOT
NOTE: No actuator color option code is required. Standard actuator color is
black, other colors and heights available, consult Customer Service Center.
See pages J-20 and J-22 for available mounting styles.
ACTUATOR OPTIONS FOR ‘MV’ MOUNTING STYLE
13 PLUNGER WITHOUT CAP
14 PLUNGER WITH CAP
15 PLUNGER WITH CAP
Cap part number 7089
Cap part number 8018
OPTION
CODE
ACTUATOR CAP
COLORS
17 PLUNGER WITH CAP
19 PLUNGER WITH CAP
2
BLACK
NONE
01-13, 23 ACTUATORS
Other colors available,
consult Customer Service Center.
Cap part number 7982
Cap part number 8940
ACTUATOR CAPS
SPLASH CAPS
Caps supplied are not installed standard. To order actuator options ‘14 thru 29,’ select
desired cap color from chart and place option code in last box of ordering format. Leave box
empty for all other actuator options. Caps may also be ordered separately and user installed,
see pages J-23 and J-24. Specify the four digit part number and desired cap color. For
switches without caps, order ‘13’ or ‘23’ actuator option. Cap finish: gloss (excluding square
cap part number 7982, finish: matte).
New protective splash caps for PC mounted slide
switches are available separately and reusable.
They provide splash protection during soldering and
cleaning processes. To order specify correct part
number, see page J-23.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–19
C&K L Series
Miniature Slide Switches
DETENT
1
2
WITH DETENT
Standard with all maintained models: L101, L102, L103, L104, L113, L201, L202, L203 and L204.
WITHOUT DETENT
Standard with all momentary models: L112, L123, and L212.
MOUNTING STYLE
MS PC THRU-HOLE, 2 POSITION MODELS
.288
(7,32)
.200
(5,08)
AVAILABLE WITH:
.425
.225 TYP
(5,71)
.050 X .020 TYP
(10,79)
.225 TYP
(5,70)
Models: L101, L102, L112, L103, L113 L123,
L201, L202, L203, L104 and L204
Terminations: 02, 06, 10 and 12
J
(1,27) X (0,51)
.150 TRAVEL
(3,81)
6
5
4
3
2
1
.760
(19,30)
Actuators: 01, 02, 03, 05, 11 and 12
.181 TYP
(4,60)
.200
(5,08)
.181 TYP
(4,60)
.065 DIA
(1,65) TYP
.070 TYP
(1,78)
PC MOUNTING
.125 TYP
(3,18)
TERMINAL NOS. FOR
REFERENCE ONLY
For mounting information, see
TERMINATIONS section, page J-21.
.221 TYP
(5,61)
L203011MS02Q
Splash caps are available separately
and reusable, see page J-23.
PC THRU-HOLE, 3 POSITION MODELS
DP3T
.358
(9,09)
.425
(10,80)
.225
(5,08)
.181 TYP
(4,60)
.941
(23,90)
.160 TYP
(4,06)
TRAVEL
.200
(5,08)
.070 TYP
(1,78)
.125
(3,18)
.200
(5,08)
.226
(5,74)
PC THRU HOLE, 4 POSITION MODELS
.288
(7,32)
.200
.425
.225 TYP
(5,71)
(5,08)
.170 TRAVEL
(4,32) TYP
(10,79)
.050 X .020 TYP
(1,27) X (0,51)
.225 TYP
(5,70)
10
9
8
7
6
5
4
3
2
1
1.122
(28,50)
.181 TYP
(4,60)
.181 TYP
(4,60)
.050 TYP
(1,27)
.065 DIA
(1,65) TYP
TERMINAL NOS. FOR
REFERENCE ONLY
.070 TYP
(1,78)
.232 TYP
(5,89)
MA RIGHT ANGLE, PC THRU-HOLE
AVAILABLE WITH:
.181 TYP
(4,60)
.550
(13,97)
Models: L201, L202, L113 and L123
Terminations: 04
Actuators: 02 and 12
.412
(10,46)
.335
(8,51)
.100
(2,54)
PC MOUNTING
.800
(20,32)
.130
For mounting information, see
TERMINATIONS section, page J-21.
(3,30)
TRAVEL
L202021MA04Q
Horizontal Actuation
.200
(5,08)
.125
.100 TYP
Splash caps are available separately
and reusable, see page J-23.
(2,54)
.272
(6,91)
(3,16)
.215
(5,46)
DPDT
.256
(6,50)
RIGHT ANGLE, PC, SP-3 POSITION MODELS
.335
(8,51)
.100 TYP
(2,54)
.412
(10,46)
.400
(10,16)
.140
(4,06)
.181 TYP
4
3
2
1
TRAVEL
(4,60)
4
3
2
1
0.941
(23,90)
.200
(5,08)
TERM. NOS. FOR
REFERENCE ONLY
.100 TYP
(2,54)
.256
(6,50)
.215
(5,46)
0.125
(3,18)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–20
C&K L Series
Miniature Slide Switches
MOUNTING STYLE
ML RIGHT ANGLE, PC THRU-HOLE
AVAILABLE WITH:
Models: L101, L102, L112
Terminations: 04
Actuators: 01, 02, 05, 11 and 12
PC MOUNTING
For mounting information, see
TERMINATIONS section, page J-21.
L102021ML04Q
Splash caps are available separately
and reusable, see page J-23.
Horizontal Actuation
SPDT
J
MV RIGHT ANGLE, PC THRU-HOLE
AVAILABLE WITH:
Models: L112 and L212
Terminations: 02, 06, 10 and 12
Actuators: 13 thru 19
PC MOUNTING
For mounting information, see
TERMINATIONS section, page J-21.
L212132MV02Q
Splash caps are available separately
and reusable, see page J-23.
DPDT
SS PANEL WITH MOUNTING EARS
PANEL MOUNTING
.358
(9,09)
.425
(10,60)
.135
(3,43)
.225
(5,72)
.181 TYP
(4,60)
.360
(9,14)
1.000
(25,40)
6
5
4
6
3
2
1
1.200
.760
(19,30)
(30,48)
5
4
1.000
(25,40)
.200
(5,08)
.150
(3,81)
TRAVEL
.110 DIA
.070 TYP
(2,79ø) TYP
L202011SS03Q
(1,78)
.200
(5,08)
.125
(3,18)
AVAILABLE WITH:
.240
(6,10)
DPDT
.060
(1,52)
Models: L101, L102, L112, L201 and L202
Terminations: 01, 02, 03, 06, 10, 12
Actuators: 01, 02, 03, 05, 11 and 12
TS PANEL WITH INTEGRAL MOUNTING EARS
PANEL MOUNTING
.240
(6,10)
.425
(10,80)
.100 DIA TYP
(2,54ø)
.070 TYP
(1,78)
.135
(3,43)
.125 R TYP
(3,18)
8
7
6
5
4
3
2
1
1.000
(25,40)
.941
1.000
(25,40)
.530
7
.840
(13,46)
6
5
(21,34)
(23,90)
.160 TYP
(4,06)
TRAVEL
.200
(5,08)
L203011TS03Q
.110 DIA
(2,79ø)
.181
(4,60)
TYP
DP3T
.225
(5,72)
.125
(3,18)
.324
(8,23)
.200
.358
(9,09)
(5,08)
AVAILABLE WITH:
Models: L103, L113, L123 and L203
Terminations: 01, 02, 03, 06, 10, 12
Actuators: 01, 02, 03, 05, 11 and 12
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–21
C&K L Series
Miniature Slide Switches
TERMINATIONS
‘MS, MV, SS & TS’ Mounting Styles Only
02 PC THRU-HOLE
01 SOLDER LUG WITH NOTCH
03 SOLDER LUG WITH HOLE
10 PC THRU-HOLE
.085
(2,16)
.240
.226
(5,74)
.240
(6,10)
.226
(5,74)
.060
(6,10)
(1,52)
.062
.272
(6,91)
(1,57)
.080
(2,03)
.028
.080
(0,71)
.080
(2,03)
.050
(2,03)
.050
.046
(1,17)
.080
(2,03)
(1,27)
(1,27)
.020 THK.
(0,51)
.020 THK.
(0,51)
.020 THK.
.020 THK.
(0,51)
(0,51)
‘01’ terminations
only.
‘MA & ML’ Mounting Styles Only
12 PC THRU-HOLE
06 WIRE WRAP
04 PC THRU-HOLE
J
.263
.065
.256
.219
.445
(6,68)
(1,65)
(6,50)
.085
(10,64)
(11,30)
(2,16)
.080
(2,03)
.080
(2,03)
.080
(2,03)
.050
(1,27)
.050
(1,27)
.050
(1,27)
.020 THK.
(0,51)
.020 THK.
(0,51)
.020 THK.
(0,51)
.181 TYP.
(4,60)
.181 TYP.
(4,60)
.272
(6,91)
.225
(5,72)
.181 TYP.
(4,60)
.181 TYP.
(4,60)
.225
(5,72)
.181 TYP.
(4,60)
.181 TYP.
(4,60)
.187 TYP.
(4,75)
.272
.065 DIA
(1,65ø)
TYP.
.065 DIA
(1,65ø)
TYP.
(6,91)
.225
.272
.065 DIA
(1,65ø)
TYP.
.065 DIA
(1,65ø)
TYP.
(5,72)
(6,91)
.065 DIA
(1,65ø)
TYP.
.065 DIA
(1,65ø)
TYP.
.065 DIA
(1,65ø
TYP.
All models with ‘04’
terminations and
‘ML’ mounting style.
All 2 position models,
except ‘04’ terminations.
All 2 position models
with ‘04’ terminations
and ‘MA’ mounting style.
All 3 position models,
except ‘04’ terminations.
All 3 position models,
with ‘10’ terminations.
All 4 position models,
with ‘10’ terminations.
All 2 position models
with ‘04’ terminations
and ‘MA’ mounting style.
CONTACT MATERIAL
OPTION
CODE
RoHS
COMPLIANT
RoHS
COMPLIANT
CONTACT
MATERIAL
RATINGS
LX0X, LX1X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC;
0.5 AMP @ 125 V DC (UL/CSA).
LX6X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC
(UL/CSA).
LOW LEVEL/DRY
2
SILVER
YES
YES
YES
Q
B
G
YES
CIRCUIT
1
GOLD
POWER
YES
YES
0.4 VA MAX. @20 V AC OR DC max.
LX0X, LX1X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @
125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL/CSA).
LX6X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or
28 V DC; 2 AMPS @ 250 V AC (UL/CSA).
LOW LEVEL/DRY
GOLD OVER
3
CIRCUIT OR POWER
SILVER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
2
3
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.
All models
with all options (except ‘01’ termination) when ordered with
‘G’ or ‘Q’ contact material.
Models with ‘01’ termination option
only.
NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.
SEAL
NONE NO SEAL
E
EPOXY SEAL
EPOXY
.075 MAX.
(1,91)
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–22
C&K L Series
Miniature Slide Switches
AVAILABLE HARDWARE
Cap
Cap
Cap
Compatible with 13-19 actuators
Compatible with 13-19 actuators
Compatible with 13-19 actuators
.310 DIA.
(7,87 )
.375 DIA.
(9,53 )
.200 DIA.
(5,08 )
.120
(3,05)
.138
(3,51)
.250
(6,35)
.250
(6,35)
.120
(3,05)
.155
(3,94)
PART NO.
PART NO.
PART NO.
708902000 BLACK
708903000 RED
752702000 BLACK
752703000 RED
801802000 BLACK
801803000 RED
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
J
Cap
Cap
Cap
Compatible with 13-19 actuators
Compatible with 13-19 actuators
Compatible with 13-19 actuators
.450 SQ.
(11,43)
.195
(4,95)
.240
(6,10)
PART NO.
PART NO.
PART NO.
PART NO.
894002000 BLACK
894003000 RED
894102000 BLACK
894103000 RED
484602000 BLACK
484603000 RED
798202263 BLACK
798203000 RED
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Gloss
Material: Nylon
Finish: Matte
Cap
Splash Cap
Splash Cap
Compatible with 01-05 actuators
Fits ‘MV’ mounting style,
LX1X models only.
Fits ‘MS’ mounting style,
LXX1 & LXX2 models only.
PART NO.
PART
NO.
PART NO.
120100602 BLACK
120100300
Material: Nylon
Finish: Matte
120100200
Material: Nylon
Material: Nylon
Splash Cap
NOTE: Other colors available,
consult Customer Service Center.
Fits ‘MA’ mounting style,
LXX3 models only.
PART NO.
120100400
Material: Nylon
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–23
L212111TS10Q2 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
L212111TS10QE | ITT | Miniature Slide Switches | 获取价格 | |
L212111TS10QE2 | ITT | Miniature Slide Switches | 获取价格 | |
L212112MS02B | ITT | Miniature Slide Switches | 获取价格 | |
L212112MS02B2 | ITT | Miniature Slide Switches | 获取价格 | |
L212112MS02BE | ITT | Miniature Slide Switches | 获取价格 | |
L212112MS02BE2 | ITT | Miniature Slide Switches | 获取价格 | |
L212112MS02Q | ITT | Miniature Slide Switches | 获取价格 | |
L212112MS02Q2 | ITT | Miniature Slide Switches | 获取价格 | |
L212112MS02QE | ITT | Miniature Slide Switches | 获取价格 | |
L212112MS02QE2 | ITT | Miniature Slide Switches | 获取价格 |
L212111TS10Q2 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6