MD06L3NCQF
更新时间：2024-09-18 17:21:53
品牌：ITT
描述：Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Long Round Actuator, Through Hole-straight, ROHS COMPLIANT
概述
规格参数
数据手册MD06L3NCQF 概述
Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Long Round Actuator, Through Hole-straight, ROHS COMPLIANT 旋转开关
MD06L3NCQF 规格参数
| 是否Rohs认证： | 符合 | 生命周期： | Transferred |
| 包装说明： | ROHS COMPLIANT | Reach Compliance Code： | unknown |
| ECCN代码： | EAR99 | HTS代码： | 8536.50.90.20 |
| 风险等级： | 5.24 | 执行器类型： | LONG ROUND |
| 主体高度： | 9.4 mm | 主体长度或直径： | 13.34 mm |
| 触点（交流）最大额定R负载： | .25A@125VAC | 最大触点电流（交流）： | 0.25 A |
| 最大触点电流（直流）： | 0.25 A | 触点（直流）最大额定R负载： | .25A@28VDC |
| 最大触点电压（交流）： | 125 V | 最大触点电压（直流）： | 28 V |
| 电气寿命： | 10000 Cycle(s) | 分度角： | 30 deg |
| JESD-609代码： | e4 | 安装特点： | THROUGH HOLE-STRAIGHT |
| 位置数： | 6 | 开关段数量： | 1 |
| 最高工作温度： | 85 °C | 最低工作温度： | -30 °C |
| 密封： | SPLASHPROOF SHAFT AND PANEL SEALED | 表面贴装： | NO |
| 开关动作： | LATCHED | 开关功能： | DP6T |
| 开关类型： | ROTARY SWITCH | 端子面层： | Silver (Ag) |
| 端接类型： | SOLDER | Base Number Matches： | 1 |
MD06L3NCQF 数据手册
通过下载MD06L3NCQF数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载C&K M Series
Half-inch Rotary Switches
Features/Benefits
Typical Applications
• Test equipment
• Multi-pole and multi-positions
• Panel and PCB mounting
• Stainless steel actuator
• Non-shorting contacts
• Industrial equipment
• Medical equipment
Models Available
Specifications
Materials
CONTACT RATING: Q contact material: Carry-6 AMPS continuous.
Switch-250 mA max. @ 125 V AC or 28 DC. Non-shorting
contacts standard. See page L-15 for additional ratings.
HOUSING AND BUSHING: Zinc alloy, bright zinc plated,
with clear chromate finish.
ACTUATOR: Zinc alloy, nickel plated or stainless steel.
ELECTRICAL LIFE: 10,000 make-and-break cycles at 150 mA,
125 V AC or 28 DC.
BASE: Diallylphthalate (DAP) or melamine phenolic, with insert
molded terminals.
CONTACT RESISTANCE: Below 20 mΩ typ. initial @
ROTOR: Glass filled polyester (UL 94V-0).
2-4 V DC, 100 mA, for both silver and gold plated contacts.
MOVABLE CONTACTS:
10
INSULATION RESISTANCE: 10 Ω min.
Non-shorting: Q contact material: Copper alloy, silver plated.
See page L-15 for additional contact materials.
DIELECTRIC STRENGTH: 600 Vrms min. @ sea level.
OPERATING & STORAGE TEMPERATURE: –30ºC to 85ºC.
OPERATING TORQUE: 4-7 ounces-inches typ. initial.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
STATIONARY CONTACT & ALL TERMINALS: Q contact material:
Copper alloy, silver plated. All terminals insert molded. All
terminals present regardless of number of switch positions.
See page L-15 for additional contact materials.
CONTACT SPRING: Music wire, phosphate coated.
STOP PIN: Stainless steel.
NOTE: Any models supplied with Q or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
STOP RING: Brass.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
HARDWARE: Nut: Brass, nickel plated; Lockwasher: Steel,
nickel plated.
L
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L-13 thru L-17. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
MA00 SP, 10 pos., 36°
MA02 SP, 2 pos., 36°
MA03 SP, 3 pos., 36°
MA04 SP, 4 pos., 36°
Actuator & Bushing
L1 .650" long, flatted
L2 Screwdriver slot, flush
MA05 SP, 5 pos., 36°
MA06 SP, 6 pos., 36°
MA10 SP, 10 pos., 36°
MB00 DP, 5 pos., 36°
MB03 DP, 3 pos., 36°
MB04 DP, 4 pos., 36°
MB05 DP, 5 pos., 36°
MC00 SP, 12 pos., 30°
MC03 SP, 3 pos., 30°
MC07 SP, 7 pos., 30°
MC12 SP, 12 pos., 30°
MD00 DP, 6 pos., 30°
MD06 DP, 6 pos., 30°
ME00 SP, 10 pos., 36°
ME04 SP, 4 pos., 36°
MF00 DP, 5 pos., 36°
MG00 SP, 12 pos., 30°
MH00 DP, 6 pos., 30°
Short/Non-short
Non-shorting contacts
L3 .650" long, round
S1 .650" long, flatted
S2 Screwdriver slot, flush
S3 .650" long, round
S6 .785" long, slot
N
Terminations
Z
C
Solder lug
PC Thru-hole
Contact Material
Q
G
Silver
Gold over silver
Seal
D
F
No seal
Splashproof shaft & panel seal
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
L–12
C&K M Series
Half-inch Rotary Switches
SWITCH FUNCTION
SP MODELS 36º INDEXING
36º INDEXING
SCHEMATIC
30º INDEXING
MODEL NO. MODEL NO.
WITH STOP WITH STOP
NO.
POLES
SWITCH
FUNCTION
MODEL NO. MODEL NO.
WITH STOP WITH STOP
PINS
RINGS
NO.
POLES
SWITCH
FUNCTION
PINS
RINGS
10 Positions
No Stops
MA00
ME00
12 Positions
No Stops
MC00
MG00
—
—
2 Positions
3 Positions
4 Positions
5 Positions
6 Positions
10 Positions
MA02
MA03
MA04
MA05
MA06
MA10
DP MODELS 36º INDEXING
SCHEMATIC
—
—
—
3 Positions
7 Positions
12 Positions
MC03
MC07
MC12
SP
DP
SP
ME04
—
—
—
6 Positions
No Stops
MD00
MD06
MH00
—
6 Positions
5 Positions
No Stops
SP MODELS 30º INDEXING
SCHEMATIC
MB00
MF00
3 Positions
4 Positions
5 Positions
MB03
MB04
MB05
DP
—
—
DP MODELS 30º INDEXING
SCHEMATIC
All models
with all options when ordered with S1-SB stainless steel actuator options.
L
NOTE: Number of positions or stops preset at factory (NOTE: MX00 models have full 360 rotation with no stops. Stop pins or stop rings supplied for user-selectable stops, see above).
All terminals present regardless of number of switch positions. Hardware is available separately, see section “Technical Data and Additional Hardware”.
SP, 36º Indexing
DP, 36º Indexing
Terminal Numbers Marked
On Side Of Housing
Actuator Shown In Pos. 1
Part number shown: MA00L1NZQD
SP, 30º Indexing
DP, 30º Indexing
Terminal Numbers Marked
On Side Of Housing
Actuator Shown In Pos. 1
Part number shown: MC00L1NZQD
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
L–13
C&K M Series
Half-inch Rotary Switches
ACTUATOR (ZINC ALLOY)
L1 .650" LONG, FLATTED
L2 SCREWDRIVER SLOT, FLUSH
L3 .650" LONG, ROUND
All actuators shown in pos. 1
ACTUATOR (STAINLESS STEEL)
L
S1 .650" LONG, FLATTED
S2 SCREWDRIVER SLOT, FLUSH
S6 .785" LONG, SLOT
S3 .650" LONG, ROUND
All actuators shown in pos. 1
All models UL/CSA when ordered with stainless steel actuators.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
L–14
C&K M Series
Half-inch Rotary Switches
SHORTING/NON-SHORTING CONTACTS
N
Z
NON-SHORTING CONTACTS
Break-before-make
TERMINATIONS
SOLDER LUG
C
PC THRU-HOLE
SP
DP
SP
DP
PC MOUNTING
36 INDEXING
PANEL MOUNTING
º
WITHOUT FLATS
WITH FLATS
SP
DP
0.213
(5.41)
0.260 DIA
(6.59)
0.260 DIA
(6.60)
PC MOUNTING
L
º
30 INDEXING
SP
DP
Hardware: All models, one mounting nut and lockwasher
supplied standard. MA00 thru MD00 models: two stop pins
and adhesive mylar washer supplied. ME00 thru MH00
models: two stop rings supplied. Hardware is available
separately, see section “Technical Data and Additional
Hardware”.
NOTE: Q contact material standard. Terminal numbers marked on side of housing.
All terminals insert molded. All terminals present regardless of number of switch positions.
Actuators and schematics shown in pos. 1.
CONTACT MATERIAL
RoHS
COMPATIBLE*
CONTACT
TERMINAL
MATERIAL
PLATING
RoHS
COMPLIANT*
OPTION
CODE
RATING
CARRY: 6 AMPS CONTINUOUS. SWITCH: 250 mA @ 125 V AC
or 28 V DC.
1, 2
2
Q
G
YES
YES
POWER
YES
YES
SILVER
SILVER
LOW LEVEL/DRY CIRCUIT
OR POWER
0.4 VA MAX. @ 20 V AC or DC MAX. or, CARRY: 6 AMPS
CONTINUOUS. SWITCH: 250 mA @ 125 V AC or 28 V DC.
GOLD OVER
4
GOLD
3, 4
SILVER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
1
MOVABLE CONTACTS: Non-shorting: Copper alloy, silver plated.
Shorting: Zinc alloy, silver plated.
NOTE: Any models supplied with Q G contact material are RoHS
compliant. For the latest information regarding RoHS compliance,
please go to: www.ittcannon.com/rohs.
2
3
STATIONARY CONTACTS & ALL TERMINALS: Copper alloy, silver plated.
MOVABLE CONTACTS: Non-shorting: Copper alloy, with gold plate over nickel plate, over silver plate.
Shorting: Zinc alloy, with gold plate
All models
when ordered with S1-S6 stainless steel actuator options.
4
STATIONARY CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate over silver plate.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
L–15
C&K M Series
Half-inch Rotary Switches
SEAL
D
NO EPOXY SEAL
F
SPLASHPROOF SHAFT AND PANEL SEAL
Setting Stops With Stop Pins
MA00, MB00, MC00 & MD00 Models Only:
The number of switch positions or stops are adjustable by means of stop pins provided with each switch. Switches are normally
shipped with stop pins and hardware in bulk, not installed. Without stop pins, switches have full 360º rotation and no stops.
Note that all two pole models begin to repeat when actuated 180º or more.
To set stops, refer to figures 1 & 2. Orient switch so that terminal no. 1 is as shown. Turn actuator to position 1, using flats on
bushing and terminal no. 1 as reference. Install CCW stop pin in hole designated ‘X’. Install second stop pin in hole number
corresponding to the number of positions desired. Note that two pole models will begin to repeat when actuated 180º or more.
To retain stop pins, use adhesive mylar washer included; see figure 3.
All models except MX00 models have number of switch positions or stops pre-set at factory and are not adjustable.
Hardware:
Two stop pins, mounting nut, and lockwasher supplied standard.
P/N 537100000
L
36º Indexing Models
30º Indexing Models
P/N 537202000
Top View
Top View
Fig. 1
Fig. 2
Fig. 3
Setting Stops With Stop Rings
ME00, MF00, MG00 & MH00 Models Only:
The number of switch positions or stops are adjustable by means of stop rings provided with each switch. These models are
normally shipped with stop rings and hardware in bulk, not installed. Without stop rings, switches have full 360º rotation and no
stops. Note that all two pole models begin to repeat when actuated 180º or more.
To set stops refer to figures 4 & 5. Orient switch so that terminal no. 1 is as shown. Turn actuator to pos. 1 using flats on bushing
and terminal no. 1 as reference. See figure 6 and install inner stop ring with short tab in hole designated ‘X’. Install outer
stop ring with long tab in hole number corresponding to the number of positions desired. Note that all two pole models begin to
repeat when actuated 180º or more. Use mounting nut and lockwasher to retain stop rings.
All MEXX, MFXX, MGXX & MHXX Models (Except MX00 models):
Number of switch positions or stops are preset at factory, but are user adjustable.
Hardware:
Two stop rings, mounting nut and lockwasher supplied standard.
36º Indexing Models
30º Indexing Models
Top View
Top View
Fig. 4
Fig. 5
Fig. 6
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
L–16
C&K M Series
Half-inch Rotary Switches
AVAILABLE HARDWARE
Stop pins
Stop Ring
Washer
One each required for setting stops.
PART NO.
PART NO.
PART NO.
638100000 INNER-W/SHORT TAB
638101000 OUTER-W/LONG TAB
586800000 RUBBER PANEL SEAL
537100000
537202000 ADHESIVE MYLAR
RETAINS STOP PINS
NOTE: Additional nuts and lockwashers available separately, see section “Technical Data and Additional Hardware”.
L
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
L–17
MD06L3NCQF 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| MD06L3NZGD | ITT | Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Long Round Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 |
|
| MD06L3NZGD | LITTELFUSE | Half-inch Rotary Switch | 获取价格 |
|
| MD06L3NZGF | ITT | Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Long Round Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 |
|
| MD06L3NZGF | LITTELFUSE | Half-inch Rotary Switch | 获取价格 |
|
| MD06L3NZQD | ITT | Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Long Round Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 |
|
| MD06L3NZQF | ITT | Rotary Switch, 6 Positions, DP6T, Latched, 0.25A, 28VDC, Solder Terminal, Long Round Actuator, Panel Mount-threaded, ROHS COMPLIANT | 获取价格 |
|
| MD06P115LS | SWST | 小信号金氧半電晶體 | 获取价格 |
|
| MD06P115LS-AH | SWST | 小信号金氧半電晶體 | 获取价格 |
|
| MD06P220L | SWST | 小信号金氧半電晶體 | 获取价格 |
|
| MD06S1NCGD | ITT | Half-inch Rotary Switches | 获取价格 |
|
MD06L3NCQF 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
