MD1-9SS_技术文档

Cannon Microminiature Products

system, developed by ITT in the early

in all of our business portfolios.

1960’s. A separate section describes in

detail the twist pin electrical contact

technology (refer to page 6).

Six Sigma Engineering

ITT, utilizing its six sigma tools and mul-

tiple lean initiatives, offers the most

experienced engineering design team in

The Standard of Six Sigma

High Performance Micro Miniature

Connectors

When you specify a

Cannon microminiature

connector, you can rely on

a product designed,

developed, and manufac-

tured to the highest quali-

ty and reliability standards

in the industry. This tradi-

tion of excellence is

based on ITT’s corporate

culture of operating its

entire business under the

principles

ITT Cannon is a division of ITT Inc.

Developed first by Cannon in the 1960s,

Cannon's Micro Connector portfolio has

witnessed many product extensions

since then, and it remains the most

extensive in the industry, offering the

most reliable and cost effective range of

micro interconnect solutions. These

innovations have enabled ITT to provide

products and technologies to such

markets as:

of Six Sigma. At ITT, Six

Sigma is not just a quality

philosophy but a com-

plete corporate culture

the micro miniature interconnect field.

Using our systems approach, ITT contin-

ues to advance new interconnect tech-

nologies by developing advanced prod-

• Aerospace

• Computers Systems

• Defense Electronics

• Geophysical

• Industrial Automation

• Medical Electronics

• Network Systems

• Telecom Switching

• Underwater Systems

• Wireless

that drives the entire busi- ucts including higher density Nano

ness. Our Value Based

Management and Value Based Product

Development systems are two corner-

stones of ITT that allows for the develop-

ment of both leadership and product

0.025-inch spacing interconnects, Chip-

on-Flex filter connectors, flexible high

density circuits terminated directly to ITT

contacts, and innovative high speed

mixed signal connector configurations.

development principles, ensuring that the In conjunction

correct industry leading products are

with our design

teams, ITT

operates a

world class test

lab offering

state of the art

capabilities in electronic, fiber optic, and

mechanical test expertise . Our certified

test engineers and technicians can

develop a specific test plan based on

our customer’s specific needs.

Additionally, our team is experienced in

providing test services and programs for

US DOD Defense electronics and Space

related programs.

Offering the broadest selections of stan-

dard and custom micro interconnect

solutions, ITT is the one stop source for

design, development, manufacturing,

and test of sophisticated multi channel

high density connectors. Our product

portfolio consists of rectangular, circular,

quick disconnect, high speed signal, fil-

ter, hermetic, mixed signal packages,

and strip style interconnects. Each prod-

uct has unique mechanical engagement

and locking mechanisms to meet the

demands of harsh environment applica-

tions. These products include our Centi

Line .100-inch and .075-inch center

spacing, the Micro line .050 inch center

spacing, and our Nano line of .025-inch

center contact spacing. All of ITT’s micro

connectors utilize our twist pin contact

Six Sigma Manufacturing

ITT operates manufacturing facilities in

the United States, France, Germany,

Italy, Mexico, China, and the UK, all of

developed to the accepted market driven

lead times. These principles have

allowed ITT to become the market leader

www.ittcannon.com

2

Cannon Microminiature Products

which have particular prod-

uct area strengths allowing

ITT to offer a truly global

footprint to our customers.

Our facilities are world class

and accommodate full verti-

viding terminated flex circuit assemblies,

high temperature geophysical cable

assemblies, innovative medical electron-

ics cable assemblies, over mold strain

relief systems, and EMI shielded termina-

tions.

cal integration with the latest

manufacturing technologies

RoHS Compliance Information

including: automated and

robotic machining centers,

Super Market manufacturing

ITT has implemented a strict

parts control plan for all ITT

cells, Kanban pull systems,

electronics plants worldwide

and automated electrical,

that allows the Cannon Microminiature

mechanical, and optical test and inspection equipment. The

combination of our manufacturing strength and our advanced

manufacturing facilities allows ITT to offer products at market

driven prices. Our capabilities, especially in robotics, comput-

erized precision tooling, Kaizen Project Management, Six

Sigma tools, and test labs, gives ITT the most optimized global

manufacturing footprint in the interconnect industry.

connector product portfolio to meet the requirements of

European Union Directive 2002/95/EC better know as the

Reduction of Hazardous Substances initiative. To make things

easier for our customers, all Cannon Microminiature products

can be ordered with an R prefix number which insures our

customers will receive RoHS compliant parts for their commer-

cial electronics applications and equipment. Since most RoHS

hazardous substances center around specific metal plating

and lead solder coatings, ITT's products for RoHS compliance

are available in the following plating finishes: electroless nickel,

stainless steel, Anodize over aluminum and Gold plating. It

should be noted that gold plating

The Custom Difference

As the industry leader in harsh

environment interconnect appli-

cations, ITT’s world class engi-

would be recommended as the

replacement for tin-lead solder

neering teams will work directly

with our customers to design and develop cost effective solu-

tions for their applications . In many cases we may modify

one of our standard designs to ensure a highly reliable solu-

tion where timing is critical. Yet, in those cases where a com-

plete custom interconnect solution is required, ITT will work

with our customer’s Engineers to design an interconnect solu-

tion which will be cost effective yet highly reliable. As profes-

sional consultants, our Engineering teams will provide a thor-

ough systems and mechanical analysis of any proposed solu-

tion. These analyses provide our customers with sophisticat-

ed electrical signal and mechanical charac-

when ordering board mount con-

nectors.

Non Compliant RoHS Materials

Advanced Aerospace specifications and DOD system per-

formance requirements demand the necessity to maintain

production status for the primary base metals and Chem film

coatings typically utilized in Aerospace electronics. Thus, in

order to support ITT's Aerospace customer base and maintain

our leadership position

terizations to determine the best solution for

in micro miniature con-

their application.

nector technologies,

ITT will continue to

provide interconnect

products with cadmium

plating and tin lead

solder in support of

these markets. These

materials are designed

to be comparable to

In addition to custom

connectors, ITT offers

sophisticated custom

cable assembly capa-

bilities for a wide

range of harsh envi-

ronment applications.

Our in house expert-

M83513.

ise translates to our ability to integrate differ-

ent technologies within a custom cable har-

ness. ITT's capabilities include discrete wire terminations to

multi wire cable harnesses with multiple connector configura-

tions as part of the final assembly. We also specialize in pro-

Please consult Customer Service if RoHS part verification is

required.

www.ittcannon.com

3

Table of Contents

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Microminiature Product Overview Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Twist Pin Contact System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Micro-D Metal Shell - .050" Contact Spacing (MDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Micro-D PCB - .050" Contact Spacing (MDM-PCB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Micro-D Coaxial/Power - .050" Contact Spacing (MDM-C/P). . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Hermetic (MDMH). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Filter (TMDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Micro-D Plastic Shell - .050" Contact Spacing (MD/MDV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Micro Center Jackscrew (MJS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Microminiature Circular - .050" Contact Spacing (MIK, MIKM, MIKQ) . . . . . . . . . . . . . . . . . . . . 44

Microstrips .050" Contact Spacing (MT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Microminiature Strip - .100/.050" Contact Spacing (MT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Micro Edgeboard - .050" Contact Spacing (MEB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

The Centi Line - .075" Contact Spacing (2D). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Centi-D Loc-.075" Contact Spacing (CDL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Strip Connectors - .100"/.075" Contact Spacing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

The NANO Line - .025" Contact Spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Strip Connectors - .025" Contact Spacing (NT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

NANO D Metal Shell - .025" Contact Spacing (NDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Center Jackscrew - .030" Contact Spacing (NJS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Custom Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Flex Circuit Cable Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Custom Back Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Appendix

Standard Wire Termination “L” Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Standard Wire Termination “H” Code Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Wire Color Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Product Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

www.ittcannon.com

4

Cannon Microminiature Product Overview Guide

MDM

MDM PCB

MDM

C/P

MDMH

Hermetics

TMDM

Filter

MD**

MDB

Coaxial

MJS

MIK

MIKM

Type

Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket

3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max.

Current Rating

Contact

Resistance

8 milliohms max. 8 milliohms max. 8 milliohms max. 24 milliohms max. 15 milliohms max. 8 milliohms max. 8 milliohms max. 8 milliohms max. 8 milliohms max. 8 milliohms max.

(signal)

Contact

Material

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper and steel

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

Shell

Metal

Steel

Metal

Plastic

Metal

Steel

Shell Material

Aluminum

Thermoplastic

& Thermoset

Thermoset

Thermoplastic

& Thermoset

Thermoplastic

Available

Layouts

9, 15, 21, 25, 31, 9, 15, 21, 25, 31, 7C/P2, 24C/P4, 9, 15, 21, 25, 31, 9, 15, 21, 25, 31, 9, 15, 21, 25, 31,

7C/P2

10, 26, 51 & 66 -

Rect/unshrouded

16, 28 & 35 -

7 & 55

7, 55 & 85

37, 51 & 100

27C/P5 &

10C/P10

37 & 51

Rect/shrouded 26,

38, 42 & 76 -

Polarized D

Configuration

RoHS

Polarized D

Rectangular &

Polarized D

Circular

Available

Yes*

Available

Yes

Available

Yes

Available

Yes*

No

Available

Yes*

Available

Yes

Available

Yes*

Available

Yes

Available

Yes

Factory

Yes

Terminated

Space

Applications

Available

7

Available

18

Available

22

Yes

23

Yes

25

Available

28

Available

32

Available

39

Yes

44

Yes

44

Page Number

MIKQ

MT*

MEB

2D

CDL

CTA*

NDM

NTP

NJS

Type

Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket

3A max. 3A max. 3A max. 5A max. 5A max. 5A max. 1A max. 1A max. 1A max.

8 milliohms max. 8 milliohms max. 8 milliohms max. 9 milliohms max. 9 milliohms max. 9 milliohms max. 60 milliohms max. 60 milliohms max. 60 milliohms max.

Current Rating

Contact

Resistance

Contact Material gold plated

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

precious metal

copper alloy

copper alloy alloy & gold platedalloy & gold platedalloy & gold plated

copper alloy

Shell

Metal

Steel

Plastic

Thermoplastic

139

Plastic

Metal

Plastic

Shell Material

Thermoplastic

Thermoset

Thermoplastic

Thermoset

1 thru 40

Thermoplastic

Available

Layouts

7, 19 & 37

MTV - 1 thru 120 64, 128, 92

MTB - 1 thru 80

19, 31, 52, 79

& 100

CTA3 - 1

thru 53

CTA4 - 1

thru 60

9, 15, 21, 25,

31 & 37

Rectangular -

9, 24 & 44

Circular - 27,

72 & 246

& 184

Configuration

RoHS

Circular

Strip

Polarized D

Strip

Polarized D

Strip

Rectangular &

Circular

Available

Yes

Available

Yes*

Available

Yes*

Available

No

Yes

No

Yes

No

Yes

Factory

Terminated

Space

Applications

Yes

44

Yes

48

Yes

54

No

59

No

65

No

66

Yes

72

Yes

71

Yes

73

Page Number

* Solderpot versions available for end user termination

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

5

Micro Twist Pin

Cannon Microminiature Products

NORMAL MATING

CONDITIONS

Cannon

M^ICROPIN

WIRE

WELDED TIP

SEVERE MISALIGNMENT

WIRE CRIMP

SLEEVE

Figure 1

CRIMP

AREA

TWIST PIN CONTACTS WILL MATE

EVEN UNDER SEVERE MISALIGNMENT

Pos-A-Line Contact Alignment

Figure 2

The flexible twist-pin is recessed into the insulator and the rigid socket is

exposed, reversing the traditional positions of pin and socket. During mating, the

socket is guided into the pin insulator by the lead-in chamfer. The pin is kept

from flexing beyond the socket capture radius by the walls of the cavity. The

hemispherical weld of controlled radius at the tip of the pin combines with the

lead-in chamfers of the socket contact and the pin insulator to carn the pin into

alignment. By controlling the welding process and the dimensions of the socket

contact and the insulators, it is impossible for the recessed pin to escape the

socket capture radius.

Twist Pin Contact Technology

tact and insulator material. The net result is a contact system

that makes it impossible for the recessed pin to escape the

socket capture radius. Figure 2 shows the twist pin features

as well as mating and severe misalignment conditions.

The foundation of ITT’s Cannon Micro Connector portfolio

starts with ITT’s innovative twist pin contact system. This sys-

tem was originally developed in the early 1960’s and ITT was

one of the original interconnect companies to license this

technology and improve it. Our forty five years of experience

in manufacturing and establishing a fully automated manufac-

turing system for this contact has truly given ITT the foremost

knowledge in twist pin contact technology.

The advantages of ITT’s twist pin contact system are many

and have been field proven in the most demanding applica-

tions and environments for over forty five years. Some of

these advantages include:

• Seven points of electrical contact (Micro 0.050-inc & Centi

Line 0.075-inch Interconnect Products)

As the core of our micro products, the twist pin contact offers

a superior electrical and mechanical system that outperforms

traditional machined or stamped electrical contract systems.

ITT’s twist pin system consists of the Micro Socket and the

Micro pin or Twist pin. Figure I show the basic contacts.

• Five points of electrical contact (Nano 0.025-inch

Interconnect Products)

• Contact and crimp sleeve materials carefully optimized for

extremely reliable crimps- No design tradeoffs

Figure 1

The twist pin contact system consists of several stranded

cores making up the wire bundle. The strands are subse-

quently heat treated and a weld is performed on the tip of

each contact. Crimp sleeves are then inserted over the con-

tact and crimp areas are defined to produce a seamless crimp

system. The entire twist pin system is referred by ITT as a

Pos-A-Line contact alignment system. Our reference to this

system identifies that the flexible twist pin is recessed into the

insulator and the rigid socket is exposed thus reversing the

traditional positions of the pin and socket. During the mating

sequence, the socket is guided into the pin insulator by the

lead-in chamfer. The pin is kept from flexing beyond the sock-

et capture radius by the walls of the cavity. The hemispherical

weld of controlled radius at the tip of the pin combines with

the lead-in chamfer of the socket contact and the pin insula-

tor to cam the pin in alignment. ITT has developed a very

robust Six Sigma manufacturing process that controls the

welding process as well as the dimensions of the socket con-

• Seamless crimp sleeves

• Multiple 4-indent wire crimps standard and smaller bore

micro socket contacts

• Standard integral tail & thru bundle micro pin contacts (high

density packaging)

• High mating cycles

• High current handling capabilities

• System qualification in numerous Aerospace, Defense

Electronic, and high temperature Geophysical applications.

• Wide array of wire terminations

The advantages listed above are by no means inclusive of

ITT’s innovative product improvement processes. Moving for-

ward, ITT plans to introduce additional new product features

supporting enhanced twist pin contact performance.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

6

Micro-D Metal Shell - .050" Contact Spacing

MDM

MDM connectors are used in applications

requiring highly reliable, extremely small, light-

weight connectors with higher density contact

configurations than available in traditional rec-

tangular connectors. They are available in 8

shell sizes accommodating from 9 to 100 con-

tacts, and special arrangements of power and

coaxial contacts.

employs size 24 MICROPIN^TM/MICROSOCKET^TM

contacts on .050 (1.27) centers in a contact

density identical to the standard MICRO-D con-

nector series, but with these additional features:

• Aluminum shells to provide greater

strength, prevent chipping, cracking or

breaking, offer electromagnetic (EMI) and

RFI shielding.

These connectors are designed to meet the rap-

idly increasing demands for an environmental,

high performance, rugged, moisture-sealed

microminiature connector. This connector

• Silicone elastomer compression interfacial

seal to provide a moisture and humidity

seal between each contact and between

contacts and shell.

Specifications

STANDARD MATERIALS AND FINISHES

MECHANICAL FEATURES

Shell

- 6061-T6 Aluminum alloy per

QQ-A-200/8, yellow chromate/

cadmium, Type II, Class 3 over

electroless nickel per SAE

AMS-C-26074, Class 4.

- Liquid Crystal Polymer per MIL-M-24519,

Type GLCP-30F (9-100)

Coupling

- Friction/jackscrews

- Keystone-shaped shells

- .050 (1.27)

Polarization

Contact Spacing

Centers

Shell Styles

- Plug and receptacle

Insulator

No. of Contacts

- 9 thru 100 signal;

5 signal/2 coaxial;

5 signal/2 power;

11 signal/5 coaxial;

11 signal/5 power;

0 signal/10 coaxial;

0 signal/10 power;

20 signal/4 coaxial;

20 signal/4 power

- Glass filled diallyl phthalate per

MIL-M-14, Type SDGF (7*2 and 24*4)

- Polyphenylene sulfide per

MIL-M-24519, Type GST-40F (16*5)

- Polyester per MIL-M-24519, Type

GPT-30F (10*10)

Contacts

- Copper alloy, gold plate

Mounting Hardware - 300 Series stainless steel, passivate

Kit, Jackpost (3) items - 300 Series stainless steel, passivate

Coaxial Cable

Wire Size

- RG - 178/U

- #24 thru #32 AWG

Washer

- 400 Series stainless stell, passivate

Contact Termination - Multiple indent crimp

Standard Epoxy

- Hysol EE4215/HD3561, color black

or Hysol EE4198/HD3561, color green

Performance Data

The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where

applicable. Data is applicable to standard connectors with standard termination. Variations may affect this

data, so please consult customer service for further information on your requirements.

Test

Method

Criteria of Acceptanc

e

Dielectric Withstandin

Voltage

g

Method 3001:

600 VAC at sea level

150 VAC at 70,00' altitude

No breakdown

Insulation Resistance

Method 3003

5,000 megohms minimum

No physical damage

Thermal Shock

Method 1003. Condition

- 55˚C to +125˚C

Method 2004, Condition

50 G's, 3 axes, 6 millisecond

A:

E:

Physical Shock

No physical damage

No loss of continuity

> 1 µsec

duration sawtooth pulse

Vibration

Durability

Method 2005, Condition

IV:

No physical damage

No loss of continuity

No mechanical or electri

20 G's, 10-2,000 Hz.

12 hrs

> 1 µsec

500 cycles of matin

unmating, 500 CPH

g and

max.

cal defects

Moisture Resistance

Method 1002, Type II,

omit steps 7a & 7b

Insulation resistance

> 100 megohms

Salt Spray

Method 1001, Condition

48 hours

B:

Shall be capable of matin

and meet contact resistance

g and unmating,

requirements

Contact Resistance

(MIL-STD-202)

Method 1001, Condition

At 3 amps

At 1 milliamp

B:

8 milliohms maximum

10 milliohms maximum

Contact Retention

Per 83513-Style

5 lb. minimum axial

load

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

7

Micro-D Metal Shell - .050" Contact Spacing

MDM

How to Order

For 83513-Style ordering information see pages 16 and 17

R

MDM

-

51

P

H

001

P

- XXX

RoHS COMPLIANCE

SERIES

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODE

HARDWARE

SHELL FINISH MOD CODES

TERMINATION CODE*

SERIES

(H) 001 - 18",7/34 strand,#26 AWG,

MIL-W-16878/4, Type E Teflon, yellow.

(H) 003 - 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

color coded to MIL-STD-681 System I.

MDM: (Size 9-100) Liquid Crystal Polymer (LCP)

MDM: (Combo Layout) Diallyl Phthalate (DAP)

CONTACT ARRANGEMENTS

9-15-21-25-31-37-51-100 (standard)

16C5, 10C10, 7C2, 24C4 (coaxial) or combination of

(L) 1 - 1/2" uninsulated solid #25

AWG gold plated copper.

(L) 2 - 1" uninsulated solid #25 AWG

gold plated copper.

}

16P5, 10P10, 7P2, 24P4 (power)

coax and power

CONTACT TYPE

P - Pin

S - Socket

SHELL FINISH MOD CODES

No Number - (Standard cadmium/yellow

chromate over nickel

A174 - Electroless nickel

A172 - Gold over nickel

A141 - Irridite/alodine

TERMINATION TYPE

H - Harness-insulated wire.

L - Solid-uninsulated wire.

S - Solder pot to accept #26 AWG MAX.

harness wire. (Not available with power

contact arrangements.)

A30 - Black anodize

HARDWARE

M - Military specification hardware, see

page 11 for military hardware codes.

P - Jackpost

*See page 79 and 81 for additional Termination codes.

K - Jackscrew-standard profile

L - Jackscrew-low profile

F - Float mount

B - No hardware standard

.091 (2.31) dia. hole for sizes 9-51;

.120 (3.05) dia. hole for size 100.

A - .125 (3.18) dia. mounting holes for sizes 9-51;

.166 (4.22) dia. hole for size 100.

B1 - .1475 (3.75) dia. hole for size 100

(Per 83513-Style)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

8

Micro-D Metal Shell - .050" Contact Spacing

COTS or Non Mil-Spec or Commercial or Industrial Standard Wire Termination Codes

Cannon Modification Code (Not MS)

MDM

The following termination codes are listed for your information. For additional codes please refer

to Appendix on page 79 and 81. All wire lengths are minimum.

Harness Type (H)

#26 AWG per MIL-W-16878/4, 7/34 strand, type E Teflon, stranded.

Solid Uninsulated Type (L)

#25 AWG gold plated copper

Length

3 (76.2)

All Yellow

H020

H019

H026

H029

H028

H001

H038

H009

H010

H011

H013

H017

H042

Color Coded*

H027

Termination Code

Length

.125 (3.18)

L61

L56

L57

L39

L58

L1

6 (152.4)

H016

.150 (3.81)

8 (203.2)

H034

.190 (4.83)

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

24 (609.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.8)

120 (3048.0)

H025

.250 (6.35)

H002

.375 (9.52)

H003

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

H023

L14

L2

H004

H005

L7

H006

L6

H048

L16

L10

H046

H041

* Cavity #1 black

Contact Arrangements

(Face View of Pin insert - Use Reverse Order for Socket Side)

Standard

.025

(0.64)

TYP.

.050

(1.27)

TYP.

.043

(1.09)

1

2

3

4

5

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

9

10 11

6

7

8

9

10 11 12 13 14 15

12 13 14 15 16 17 18 19 20 21

9 Contacts

15 Contacts

21 Contacts

1

2

3

4

5

6

7

8

9

10 11 12 13 14 15 16 17 18 19

1

2

3

4

5

6

7

8

9

10 11 12 13

1

2

3

4

5

6

7

8

9

10 11 12 13 14 15 16

20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

14 15 16 17 18 19 20 21 22 23 24 25

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

25 Contacts

31 Contacts

37 Contacts

1

2

3

4

5

6

7

8

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

1

2

3

4

5

6

7

8

9

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

51 Contacts

100 Contacts

Contact identification numbers are for reference only and do not appear on insulator or connector body.

.714 (18.14)

.460 (11.68)

.320

(8.13)

Coaxial

.103

1

2

3

4

5

6

7

A1

A2

A3

A4

1

8

2

9

3

4

1

2

3

A1

A2

A3

A4

A5

A1

A2

8

9 10 11 12 13

5

6

7

4

5

14 15 16 17 18 19 20

10 11

.007

(0.18)

Size 51 Shell

Size 25 Shell

Size 51 Shell

11 Micro contact

5 Coax or 5 Power

5 Micro contact

2 Coax or 2 Power

20 Micro contacts

4 Coax or 4 Power

(Not MS)

A1

A2

A3

A4

A5

A6

A7

A8

A9

A10

Size 100 Shell

0 Micro contact

10 Coax or 10 Power

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

9

Micro-D Metal Shell - .050" Contact Spacing

MDM

COTS or Non Mil-Spec or Commercial or Industrial Shell Dimensions (Conforms to 83513-Style)

Plug

.186 (4.72)

MAX.

.09ꢀ

(2.ꢀ6)

REF.

.284 (7.21)

MAX.

TWO MTG. HOLES

B

C

.091 .00ꢀ(2.ꢀ1 0.08)

.110 (2.79)

MAX.

F

A

.416 (10.57)

MAX.

G

D

E

.200 (5.08)

MAX.

Solder Pot

Receptacle

.296 (7.52)

MAX.

TWO MTG. HOLES

.091 .00ꢀ(2.ꢀ1 0.08)

F

B

.09ꢀ

(2.ꢀ6)

REF.

.110 (2.79)

MAX.

.429 (10.09)

MAX.

E

G

D

.200 (5.08)

MAX.

C

.198 (5.0ꢀ)

MAX.

A

Solder Pot

Receptacle (MDM-100 only)

.429 (10.90)

MAX.

.198 (5.0ꢀ)

MAX.

TWO MTG. HOLES

.120 .00ꢀ(ꢀ.05 0.08)

B

.ꢀ94 (10.01)

MAX.

.09ꢀ (2.ꢀ6)

REF.

G

D

E

.296 (7.52)

MAX.

C

F

A

Pigtail termination

F

Part Number

By Shell Size

A

Max.

B

Max.

C

Max.

D

Max.

E

Max.

+_.005

(0.13)

G

Max.

Average Weights**

oz. (gm.) 5ꢀ

MDM-9P*

.785 (19.94)

.935 (23.75)

1.085 (27.56)

1.185 (30.10)

1.335 (33.91)

1.485 (37.72)

1.435 (36.45)

2.170 (55.12)

.334 (8.48)

.402 (10.21)

.484 (12.29)

.552 (13.97)

.634 (16.10)

.702 (17.83)

.734 (18.64)

.802 (20.37)

.884 (22.45)

.952 (24.18)

1.034 (26.26)

1.102 (27.99)

.984 (24.99)

1.052 (26.72)

1.384 (35.15)

1.508 (38.10)

.400 (10.16)

.550 (13.97)

.700 (17.78)

.800 (20.32)

.950 (24.13)

1.100 (27.94)

1.050 (26.67)

1.442 (36.63)

.270 (6.86)

.310 (7.87)

.360 (9.14)

.308 (7.82)

.351 (8.92)

.394 (10.01)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.228 (5.79)

.296 (7.52)

.271 (6.88)

.394 (10.01)

.063 (1.79)

.084 (2.39)

.083 (2.37)

.105 (2.99)

.104 (2.97)

.119 (3.39)

.118 (3.36)

.140 (3.99)

.139 (3.96)

.161 (4.59)

.160 (4.56)

.193 (5.50)

.188 (5.35)

.500 (14.3)

1.040 (29.5)

MDM-9S*

MDM-15P*

MDM-15S*

MDM-21P*

MDM-25P*

MDM-25S*

MDM-31P*

MDM-31S*

MDM-37P*

MDM-37S*

MDM-51P*

MDM-51S*

MDM-100P*

MDM-100S*

*Add lead type and length; see How To Order.

***Weight given is 1/2", uninsulated, solid, #25 AWG gold plated copper pigtails.

Panel Mounting Dimensions (Sizes 9 - 100)

.100 .00ꢀ

.200 .00ꢀ

(7.62 0.ꢁ13

(ꢀ.08 0.ꢁ13

.19ꢀ .00ꢀ

(ꢁ0.01 0.ꢁ13

Plug and Receptacle

Rear Mounted

Plug and Receptacle

Front Mounted

Plug Front Mounted

Receptacle Rear Mounted

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

10

Micro-D Metal Shell - .050" Contact Spacing

MDM

Panel Cutouts

NOTE: See page 13 for rear panel mounting configuration.

Shell Sizes 9 thru 51

C

.450 .002

(11.43 0.05)

+.005

C

A

.100

(2.54)

R TYP.

-.000

.030 (0.76) TYP.

+0.13)

D

TYP.

-0.00

C

D

TYP.

D

B

+

+ +

FULL R. (TYP.)

.015 (0.38)R.

MAX.(TYP)

FULL R.

(TYP.)

A

26˚/27˚TYP

FULL R.

(TYP.)

PANEL REF.

Figure 1

Front Mounting

Figure 2

Rear Mounting

Figure 3

Edgeboard Mounting

Shell Size 100

+.005

1.805

-.000

.450+_.002

+.005

-.000

.030

+0.13

-0.00

)

.118

(45.85

(11.43+_0.05)

+.005

(0.76) TYP.

+0.13

-0.00

1.805 -.000

.118

1.805 -.000

)

-.000

(3.00

.118

-.000

+0.13

-0.00

+0.13

-0.00

)

(45.85

(3.00

)

(45.85

+0.13 )

(3.00

-0.00

+.004

.361 -.000

.401

-.000

+

+0.10

-0.00

+0.10

)

(9.17

)

(10.18

-0.00

+.004

1.456

+.004

-.000

1.520

-.000

+0.10

-0.00

(36.98

)

+0.10

)

(38.61

.015 (0.38)

R. MAX (TYP.)

.125

(3.18

-0.00

FULL R. (TYP.)

)

PANEL REF.

Figure 1

Front Mounting

Figure 2

Rear Mounting

Figure 3

Edgeboard Mounting

A

+.004

-.000

B

+.004

-.000

C

+.005

-.000

D

+.005

-.000

For 9-51 Shell Sizes

NOTES:

1. Front panel mounting is the preferred mounting

method. Front panel mounting dimensions

Shell

Size

Cutout

Figure

1

2

3

1

2

3

1

2

3

1

2

3

1

2

3

1

2

3

1

2

3

.408

.401

-

.271

.252

-

.570

.089

9

.570

(figure 1) will accommodate either #2-56 screws

or jackpost hardware.

.558

.551

-

.271

.252

-

.720

2. Rear panel mount dimensions (figure 2) will

accommodate #2-56 screw hardware only.

When mounting the connector with rear panel

mount jackpost see the panel cut-out

dimensions.

3. Edgeboard mounting bracket (figure 3) uses #2-

56 screws. Dimension .450+/-.002 (11.43+/-

0.05) locates the MDM receptacle flush with the

end of the board.

.720

15

21

25

31

37

51

.720

.708

.701

-

.271

.252

-

.870

.808

.801

-

.271

.252

-

.970

For 100 Shell Size

.958

.951

-

.271

.252

-

1.120

1.270

1.220

NOTES:

1. Front mounting is the preferred mounting

method. Front panel mounting dimensions

(figure 1) will accommodate either #4-40 screws

or jackpost hardware.

2. Rear panel mount dimensions (figure 2) will

accommodate #4-40 screw hardware only see

the panel cut-out dimensions.

3.Edgeboard mounting bracket (figure 3) uses #4-

40 screws. Dimension .450+/-.002 (11.43+/-

0.05) locates the MDM receptacle flush with the

end of the board.

1.108

1.101

-

.271

.252

-

1.058

1.051

-

.315

.295

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

11

Micro-D Metal Shell - .050" Contact Spacing

MDM

Mounting Hardware Views (for sizes 9-51)

This hardware supplied unassembled.

LOCK

SCREW

MATꢀNG

FACE

#2-56 UNC-2B

RETAꢀNꢀNG

CLꢀP

.185 (4.70) MAX.

CONNECTOR

SHOWN FOR

REF. ONLY

.408 (10.36)

MAX.

.182 (4.62)

PANEL REF.

.500

(12.7)

MAX.

.688 (17.48)

MAX.

.232 (5.89) MAX.

BUSHꢀNG

.093 (2.36)

Screw Lock Assembly

#2-56 UNC-2A

Jackpost - (P)

RECOMMENDED

PANEL THꢀCKNESS

Screw Lock Assembly*

.052

*NOTE Torque value is 2.5 in/lbs max.

(1.32) TYP.

.096 .005

(2.44 0.13)DꢀA.

#2-56

UNC-2B

THD

.260

(6.60) MAX.

.178 .005

(4.52 0.13)

.170

(4.32) MAX.

90˚ Angle Mounting

Bracket

B

A

90˚ Angle Mounting Bracket

A

B

Description

Part Number

322-9500-000

320-9505-000

015-9516-002

+/-.005 ( 0.ꢀ13

Max.

Screw Lock Assembly

Jackpost kit

Mounting Bracket 90˚ MDM

for 9 thru 37 Shell Sizes

Mounting Bracket 90˚ MDM

for 51 Shell Size

N/A

.147 (3.73)

.169 (4.29)

.308 (7.82)

.350 (8.89)

015-9516-003

NOTES: Screw lock assembly (322-9500-000) can be used for front mounting only. Jackpost kit

(320-9505-000) consists of two assmblies, shipped unassmbled.

Jackpost Bushing (for rear panel mounting-for sizes 9-51)

HEX IS .135 (3.43)/.115 (2.92) ACROSS FLATS

C

A

.170 (4.32)

.185 (4.70)

#2-56 UNC-2B THD

MATING FACE

.105 (2.67)

.100 (2.54)

R TYP.

.126 (3.20)

.125 (3.18)

DIA. TYP

A

B

27˚

26˚

TYP

Jackpost diameter within the "A"

dimension is .124/.120 (3.15/3.05).

.500 (12.7)

.480 (12.19)

Plug and Receptacle Dimensions

A

B

#2-56 UNC

2A THD

Shell

Size

+.004 (0.10)

-.000 (0.00)

+.004 (0.10)

-.000 (0.00)

C

+_.005 (0.13)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.34)

1.265 (32.13)

1.215 (30.86)

9

.401 (10.19)

.551 (14.00)

.701 (17.81)

.801 (20.34)

.951 (24.16)

1.101 (27.97)

1.051 (26.70)

.252 (6.40)

.295 (7.49)

15

21

25

31

37

51

A

Panel A

+.005 (0.13)

-.000 (0.00)

Jackpost Kit

Number*

Thickness

3/32 (2.4)

1/16 (1.6)

3/64 (1.2)

1/32 (0.8)

.087 (2.21)

.056 (1.42)

.042 (1.07)

.025 (0.64)

320-9505-007

320-9505-006

320-9505-005

320-9505-004

*A kit consists of 2 jackpost, 2 nuts, 2 washers.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

12

Micro-D Metal Shell - .050" Contact Spacing

MDM

Mounting Hardware Views (sizes 9-51)

This hardware is factory installed.

.ꢁ35 (18.6ꢁꢀ

MAX.

HEX HEAD -

CONNECTOR

SHOWN FOR

REF ONLY

MATING

FACE

CONNECTOR

SHOWN FOR

REF. ONLY

.050 (1.2ꢁꢀ ACROSS FLATS

.050 (1.2ꢁꢀ DEEP (REFꢀ

.014 .004

(0.36 0.10ꢀ ALLOWABLE

DIAMETRAL FLOAT

.150 .003

.490

.020 (0.51ꢀ MAX. ALLOWABLE

AXIAL FLOAT

(3.81 .0ꢁ6ꢀ

(12.45ꢀ MAX

.155

(3.94ꢀ MAX.

.185 (4.ꢁ0ꢀ

.093

MAX

(2.36ꢀ

REF.

MATING

FACE

.090 .0015

PART HAS A .040 (1.02ꢀ

MAX. AXIAL FLOAT

#2-56 UNC-2A

.031 .003

PART HAS A .040 (1.02ꢀ

MAX AXIAL FLOAT

#2-56

(2.29 0.038ꢀDIA

MATING

FACE

UNC-2A

(0.ꢁ9 0.08ꢀ

Float Mount - (F)

Jackscrew - (K) Standard Profile

Jackscrew - (L) Low Profile

Shown here is a cutaway view of the float mount for the MDM connector. The basic shell dimensions

are the same for the float mount and the screw mounting hole configurations. View shown is for standard

float mount front panel mounting. Reverse mounting is available on request.

* NOTE: Torque values are as follows:

Low Profile Jackscrew (L)-2.5 in-lbs

Standard Jackscrew (K)-2.5 in-lbs

Mounting Hardware to Military Specification (for sizes 9 - 100) per 83513/5-Style

This hardware supplied in kits unassembled (2 pieces of each item).

PLUG (REF. WITH

.092 (2.34) DIA.

#2-56 UNC-2A

MOUNTING HOLES

THREAD TYP.

#2-56 UNC-2A

PLUG (REF.) WITH

THREAD TYP.

.092 (2.34) DIA.

.062 (1.57)

MOUNTING HOLES

HEX. (REF.)

.361 (9.17) MAX.

.390 (9.91) MAX.

SIZE 100 ONLY

.010 (0.25)

TH'K (REF.)

.868 (22.05) MAX.

.902 (22.91) MAX.

Allen head

Optional Head Configuration

Plug and Receptacle

Low and High Profile

Size 9-51

.010 (0.25)

TH'K (REF.)

POTTING WELL

(REF.)

POTTING WELL (REF.)

Figure 1. Jackscrew - Low profile

Slotted Head

Size 100* (same dimensions)

Size 9-51

Size 100*

Figure 2. Jackscrew - High Profile

Slotted Head

Size 9-51

Size 100*

.125 (3.18) HEX.

.187 (4.75) HEX.

#2-56 UNC-2B THREAD

#4-40 UNC -2A THREAD

.190/.185(4.83/4.70)

.185/.175(4.70/4.44)

To order hardware kits separately, order either by M83513/5-Style** or by 320-950X-XXX.

Size 9-51

Size 100*

Mod Code Part Number

.475 .025

(12.06 0.64)

Description

* *

05

06

02

03

07

* *

15

16

12

13

17

Slotted Head Jackscrew Assy Low Profile (Figure 1)

M5 320-9508-025

M6 320-9508-027

M2 320-9508-026

M3 320-9508-028

M7 320-9505-033

M15 320-9508-021

M16 320-9508-023

M12 320-9508-022

M13 320-9508-024

M17 320-9505-030

SIZE 100 SAME

Slotted Head Jackscrew Assy Low Profile (Figure 2)

Allen Head Jackscrew Assy Low Profile (Figure 1)

Allen Head Jackscrew Assy High Profile (Figure 2)

Jackpost Assy (Figure 3)

LOCKWASHER

.062 .010

(.157 0.25)

RETAINING NUT

.154 (3.91) HEX.

.187 (4.75) HEX.

SIZE 100 SAME

Figure 3. Jackpost Assembly

Size 9-51

Size 100*

*Size 100 requires B1 size mounting holes for Mil-Spec hardware

Note: Torque values as follows:

Size 9-51 4.0 in-lbs

Size 100 6.0 in-lbs

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

13

Micro-D Metal Shell - .050" Contact Spacing

MDM

Mounting Hardware Views (for size 100)

This hardware supplied unassembled.

.123 .005

(3.12 0.13) DIA.

#4-40 UNC-2B

THD

+.010

-.005

180

(4.57

#4-40 UNC-2A THD

#4 LOCK WASHER

PANEL -

+.025

-0.13

)

MAY BE USED WITH

.093 (2.36) MAX

THICK PANEL

A

.395 (10.03)

MAX.

.500 (12.70)

MAX.

.185 (4.70)

MAX.

MATING SIDE

#4-40 UNC-2B NOTHING OR FEMALE THD

B

.064 .010

(1.62 0.25) TYP.

Jackpost - (P)

90˚Angle Mounting

Bracket

.235 .005

(5.97 0.13)

Note: Size 100 requires .120 dia (B) mounting hole

when using Commercial (P) jackpost kits.

90° Angle Mounting

Bracket

B

A

Description

Jackpost kit

Mounting Bracket 90˚ MDM

Part Number

320-9505-015

015-9528-000

Max.

.005 (0.13)

N/A

.191 (4.85)

.370 (9.40)

This hardware is factory installed.

MATING

FACE

.014 .004

.735 (18.67)

MAX.

(0.36 0.10) ALLOWABLE

CONNECTOR

SHOWN FOR

REF. ONLY

DIAMETRAL FLOAT

.020 (0.51) MAX. ALLOWABLE

AXIAL FLOAT

.174 .005

(4.4 .10)

HEX. SOCKET HEAD.

.078 (1.98) ACROSS FLATS

.050 (1.27) MIN. DEPTH

.185 (4.70)

.155 (3.94) MAX.

.093

(2.36)

REF.

MAX

.040 (1.02) MAX.

AXIAL FLOAT

.116 .002

(2.29 .051)

DIA

.031 .003

PART HAS A .040 (1.02)

MAX AXIAL FLOAT

#4-40

UNC-2A

THD

MATING

FACE

(0.79 0.08)

#4-40 UNC-2A THD

MATING SIDE

Jackscrew - (K) Standard

Float Mount - (F) Std.

Jackscrew - (L) (Low Profile)

*NOTE: Torque values are as follows:

Low Profile Jackscrew (L)-4.0 in-lbs

Standard Profile Jackscrew (K)-4.0 in-lbs

Jackpost Bushing (for Rear Panel Mounting)

Dimensions for Rear Panel Mounting

ENGAGING FACE

3/16" HEX.

LOCKING POST

1.800 .005

(45.72 0.13)

#4-40 UNC-2B

.185 (4.70)

.170 (4.32)

+.004

-.000

.401

A

)

+1.10

-0.00

(10.18

Panel

+.005 (0.13)

-.000 (0.00)

Jackpost Kit

Number*

.500 (12.70)

MAX.

Thickness

.161 (4.09)

.159 (4.04)

+.004

DIA.

1.516

-.000

3/32 (2.4)

1/16 (1.6)

1/32 (0.8)

3/64 (1.2)

.087 (2.21)

.058 (1.42)

.025 (0.64)

.042 (1.07)

320-9505-013

320-9505-012

320-9505-010

320-9505-011

+1.10

-0.00

)

(38.51

RECEPTACLE SHOWN

FOR REF. ONLY

+.005

-.000

.125

R

)

+0.13

-0.00

(3.18

#4-40 THREAD

RETAINING NUT

*2 jackposts, 2 nuts, 2 washers

Torque value for size 100

Note: Size 100 requires B mounting hole shell

size when using rear panel mount jackposts

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

14

Micro-D Metal Shell - .050" Contact Spacing

MDM

Connector Saver

Save wear and tear on your equipment and

systems connectors by using the "Connector

Saver".

Simply mate the "Connectors Saver" to your

unit and use the opposite side for your testing

interface...less wear, less tear, less chance of

damage. It is available in all eight standard

The multi-matings and unmatings experienced MDM layouts. Mating hardware is available

by most connectors during testing and final

check out can be eliminated.

and can be ordered either separately or

included with the connector saver.

.790 (20.07) MAX.

.315

(8.00)

MAX.

.040 (1.02) MAX. ALLOWABLE

AXIAL FLOAT

JACKSCREW/JACKPOST BUSHING

(FOR REFERENCE ONLY SEE

ORDERING INFORMATION BELOW.)

#2-56 UNC-2A THD (9-51)

(TYP.)

MICROSOCKET

MICROPIN

CONNECTOR RECEPT

A

B

CONNECTOR, PLUG

BACKPOTTING, EPOXY

INTERFACIAL SEAL

.185 (4.70) MAX. (TYP.)

.090 (2.29) REF.

(TYP.)

C

.900 (22.86) REF.

E-RING (TYP.)

MDM Size 9 Shown

Electroless Nickel (A174) Plated

Cadmium over Nickel (A101) Plated

A

B

C

Size

9

With Hardware

W/O Hardware

MDM98479-18

MDM98479-19

MDM98479-20

MDM98479-21

MDM98479-14

MDM98479-15

MDM98479-16

MDM98479-17

With Hardware

MDM98479-78

MDM98479-79

MDM98479-80

MDM98479-81

MDM98479-82

MDM98479-83

MDM98479-84

MDM98479-85

W/O Hardware

MDM-97294-371

MDM-97294-372

MDM-97294-373

MDM-97294-374

MDM-97294-375

MDM-97294-376

MDM-97294-377

*Hardware Kits

Max.

.005 (0.13)

Max.

MDM98479-86

MDM98479-87

MDM98479-88

MDM98479-89

MDM98479-90

MDM98479-91

MDM98479-92

MDM98479-93

320-9505-014**

.785 (19.94)

.935 (23.75)

1.085 (27.56)

1.185 (30.10)

1.335 (33.91)

1.485 (37.72)

1.435 (36.45)

2.170 (55.12)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.308 (7.82)

.351 (8.91)

.394 (10.01)

15

21

25

31

37

51

100

MDM-97294-717 320-9508-014***

* Kit contains 2 jackpost/jackscrew bushings and 2 E-Rings.

** Size 9-51-#2-56 UNC-2B Thread

*** Size 100-#4-40 UNC-2B Thread

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

15

Micro-D Metal Shell - .050" Contact Spacing

83513-Style

How to Order - 83513-Style Part Number Nomenclature – Slash Sheets 1-9

M83513/ 01

-

H100 - * * * * * *

SERIES

MDM

MDB

MDVB

-

Metal Shell, Liquid Crystal Polymer (LCP)

Diallyl Phthalate Insulator

Polyester Insulator

83513-Style SLASH SHEET

01

02

03

04

05

06

07

08

09

-

Plug, Connector, Solderpot

Receptacle, Connector, Solderpot

Plug, Connector, Crimp Type

Receptacle, Connector, Crimp Type

Metal Shell

7

Hardware Only

Plug, Connector, Solderpot

Receptacle, Connector, Solderpot

Plug, Connector, Crimp Type

Receptacle, Connector, Crimp Type

Plastic

5

INSERT ARRANGEMENT

METAL SHELL

PLASTIC

9 Contact

15 Contact

21 Contact

25 Contact

31 Contact

37 Contact

51 Contact

100 Contact

9 Contact

15 Contact

21 Contact

25 Contact

31 Contact

37 Contact

51 Contact

A

B

C

D

E

F

G

H

-

5

WIRE TYPE

No Number - For Solderpot

01

02

03

-

18" long, #26 AWG per MIL-W-22759/11-26-9 (all white)

36" long, #26 AWG per MIL-W-22759/11-26-9 (all white)

18" long, #26 AWG per MIL-W-22759/11-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

36" long, #26 AWG per MIL-W-22759/11-26-

Color Coded per MIL-STD-681, System 1, 10 colors repeating

.5" long. #25 AWG, type S per QQ-W-343,

Gold Plated

1.0" long, #25 AWG, type S per QQ-W-343,

Gold Plated

.5" long, #25 AWG, type S per QQ-W-W-343,

Tin Plated

6

04

05

06

07

08

-

1.0" long, #25 AWG, type S per QQ-W-343,

Tin Plated

09

10

11

-

18" long, #26 AWG per MIL-W-22759/33-26-9 (all white)

36" long, #26 AWG per MIL-W-22759/33-26-9 (all white)

18" long, #26 AWG per MIL-W-22759/33-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

36" long, #26 AWG per MIL-W-22759/33-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

72" long, #26 AWG per MIL-W-22759/11-26-9 (all white)

72" long, #26 AWG per MIL-W-22759/11-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

72" long, #26 AWG per MIL-W-22759/33-26-9 (all white)

72" long, #26 AWG per MIL-W-22759/33-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

3

NOTES:

3

6

1

-

For every Mil Spec Part Number, ITT has one corresponding

part number shown an example

12

-

Tolerance on wire lengths: 18", 36" and 72" long —

+1.00"/-0.00"

2

13

14

-

.5" and 1.00" — + .200"/-.000"

-

For space application, connector shell finish must be "A174"

and wire must be per MIL-W-22759/33-26.

3

4

6

3

15

16

-

Any deviations to these P/N's will result in assignment of a

special P/N, consult factory.

3

6

Size 100 not available in / 06 through / 09. (Plastic shell)

-

5

6

Color coding in accordance with MIL-STD-681, System 1,

no parenthesis. See page 83 for color code chart.

SHELL FINISH

No number - for plastic type connector

C – for Cadmium/Yellow chromate over nickel

For mounting hardware to Military Specification (sizes 9 to 100)

see page 13.

-

7

N – A174 - Electroless Nickel A174

3

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

16

Micro-D Metal Shell - .050" Contact Spacing

83513-Style

How to Order - 83513-Style Part Number Nomenclature – Slash Sheets 10-27

M83513/

10

-

A

* *

C

*

SERIES

Connector, Electrical, Rectangular

Microminiature, Polarized Shell

PC Board Mounting

MIL-C-83513 SLASH SHEET

10 – Connector, Plug, Condensed Board Right Angle (CBR), Sizes 9 – 37

11 – Connector, Plug, CBR, Size 51

12 – Connector, Plug, CBR, Size 100

13 – Connector, Receptacle, CBR, Sizes 9 – 37

14 – Connector, Receptacle, CBR Size 51

15 – Connector, Receptacle, CBR, Size 100

16 – Connector, Plug, Board Right Angle (BR), Sizes 9 – 37

17 – Connector, Plug, BR, Size 51

18 – Connector, Plug, BR, Size 100

19 – Connector, Receptacle, BR, Sizes 9 – 37

20 – Connector, Receptacle, BR Size 51

21 – Connector, Receptacle, BR Size 100

22 – Connector, Plug, Board Straight (BS), Sizes 9 – 37

23 – Connector, Plug, BS, Size 51

24 – Connector, Plug, BS, Size 100

25 – Connector, Receptacle, BS, Sizes 9 – 37

26 – Connector, Receptacle, BS, Size 51

27 – Connector, Receptacle, BS Size 100

INSERT ARRANGEMENT

METAL SHELL

9 Contact

15 Contact

21 Contact

25 Contact

31 Contact

37 Contact

51 Contact

100 Contact

A

B

C

D

E

F

G

H

-

WIRE TYPE

No Number - For Solderpot

NOTES:

01

02

03

-

.109" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped

.140" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped

.172" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped

-

1

For every Mil Spec Part Number, ITT has one

2

corresponding part number

-

Tolerance on wire lengths .015

2

-

For space application, connector shell finish must be "N".

3

4

SHELL FINISH

No letter - for plastic type connector

Any deviations to these P/N's will result in assignment

of a special P/N, consult customer service.

C - Cadmium / Yellow chromate over nickel

N - Electroless Nickel

3

HARDWARE

N - No jackpost

P - Jackpost (permanently attached)

T - Threaded insert

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

17

Micro-D PCB - .050" Contact Spacing

MDM-PCB

MDM-PCB connectors are designed for use

with flex circuitry, flat cable and printed circuit

boards or multi-layer boards. They use the

standard MDM metal shell and provide high

density and high reliability in board-to-board,

board-to-cable and cable-to-cable applications.

MDM-PCB connectors are available in 8 shell

sizes with 9 to 100 contacts. Terminations

may be straight (BS) or at 90˚ right angle (BR,

CBR) board thickness. Jackpost mounting for

use with locking hardware is also available.

How to Order - MDM-PCB Series

MDM *

-

25

P

BS

P

-

T

L39

A174

R

RoHS COMPLIANCE

SERIES

INSULATOR MATERIAL

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

MOUNTING HARDWARE (Shell Flange)

MOUNTING HARDWARE FOR PCB

TERMINATION TAIL LENGTH MODIFICATION CODE

SHELL FINISH MODIFICATION CODES

TERMINATION TAIL LENGTH MODIFICATION CODE

None - .109 (2.77) .015 (0.ꢀ3) Standard

L61 - .125 (ꢀ.13)

L56 - .150 (ꢀ.31)

L57 - .190 (4.3ꢀ)

SERIES

MDM - Micro "D" Metal Shell

TERMINATION TYPE

BS - Straight PCB Termination

BR - Right Angle PCB Termination

CBR - Right Angle Narrow Profile PCB Terminations

INSULATOR MATERIAL

Liquid Crystal Polymer (LCP)

MOUNTING HARDWARE (Shell Flange)

Lꢀ9 - .250 (6.ꢀ5)

P

- Jackposts

M7 - Jackposts

M3ꢀ51ꢀ/5-07 (Sizes 9-51)

L53 - .ꢀ75 (9.52)

CONTACT ARRANGEMENT

9, 15, 21, 25, ꢀ1, ꢀ7, 51, and 100

SHELL FINISH MODIFICATION CODES

None - Yellow Chromate/Cadmium over Nickel

A174 - Electroless Nickel

M17 - Jackposts

M3ꢀ51ꢀ/5-17 (Size 100)

No letter - none

CONTACT TYPE

P - Pin (Plug)

A172 - Gold over Nickel

A141 - Irridite/Alodine

Aꢀ0 - Black Anodize

S - Socket (Receptacle)

MOUNTING HARDWARE FOR PCB

T - Threaded Insert

#2-56 Thd for Shell Sizes 9 thru 51

#4-40 Thd for Shell Size 100

No letter - none

(For special modification codes, consult

customer service.)

NOTE: Back molding material –

Epoxy Hysol #MG40FS

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

18

Micro-D PCB - .050" Contact Spacing

MDM-PCB

BS (Board Straight) Series

I

B

ꢂ

E

C

.ꢁ86 (4.723 MIX. PLUG

.ꢁ98 (ꢀ.013 MIX. RECEPTICLE

F

G

K

J

CIV.

#ꢁ

H

LIST

CIV.

.096 .00ꢀ

(2.44 0.ꢁ13 ꢂDI.

Size 9-ꢀꢁ3

JICKPOST (9-ꢀꢁ3

#2-ꢀ6 UNC-2B TYP.

.ꢁ09 0.ꢁꢀ

(2.77 0.183

JICKPOST (ꢁ003

#4-40 UNC-2B TYP.

.ꢁ20 .00ꢀ

(1.0ꢀ 0.ꢁ13

Size ꢁ00

LIST CIV.

*

.ꢁ00 (2.ꢀ43

REF.

CIV. #ꢁ

PCB Termination Arrangements* (Viewed from PCB solder side)

Identification number shown for plug connector, use reverse order for socket connector.

NOTE: Dimensions shown are for reference only-consult factory for final design dimensions.

.0ꢀ0

(ꢁ.273

.0ꢀ0

(ꢁ.273

.0ꢀ0

(ꢁ.273

.0ꢀ0

(ꢁ.273

6

7

8

9

9 ꢁ0 ꢁꢁ ꢁ2 ꢁ1 ꢁ4 ꢁꢀ

ꢁ2 ꢁ1 ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁ8 ꢁ9 20 2ꢁ

ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁ8 ꢁ9 20 2ꢁ 22 21 24 2ꢀ

ꢁ

2

1

4

ꢀ

ꢁ

2

1

4

ꢀ

6

7

8

ꢁ

2

1

4

ꢀ

6

7

8

9

ꢁ0 ꢁꢁ

ꢁ

2

1

4

ꢀ

6

7

8

9 ꢁ0 ꢁꢁ ꢁ2 ꢁ1

.ꢁꢀ0

(1.8ꢁ3

.22ꢀ

(ꢀ.723

.17ꢀ

(9.ꢀ13

.22ꢀ

(ꢀ.723

TYP.

9 Contacts

15 Contacts

21 Contacts

25 Contacts

.0ꢀ0

(ꢁ.273

.0ꢀ0

(ꢁ.273

.ꢁ00

(2.ꢀ43

TYP.

16 17 18 19 40 4ꢁ 42 41 44 4ꢀ 46 47 48 49 ꢀ0 ꢀꢁ

ꢁ7 ꢁ8 ꢁ9 20 2ꢁ 22 21 24 2ꢀ 26 27 28 29 10 1ꢁ

20 2ꢁ 22 21 24 2ꢀ 26 27 28 29 10 1ꢁ 12 11 14 1ꢀ 16 17

ꢁ9

1ꢀ

ꢁ

2

1

4

ꢀ

6

7

8

9 ꢁ0 ꢁꢁ ꢁ2 ꢁ1 ꢁ4 ꢁꢀ ꢁ6

ꢁ

2

1

4

ꢀ

6

7

8

9

ꢁ0 ꢁꢁ ꢁ2 ꢁ1 ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁ8 ꢁ9

ꢁ

2

1

4

ꢀ

6

7

8

9 ꢁ0 ꢁꢁ ꢁ2 ꢁ1 ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁ8

.ꢁꢀ0

(1.8ꢁ3

.ꢁꢀ0

(1.8ꢁ3

31 Contacts

37 Contacts

51 Contacts

76 77

ꢀ2

78

79

80 8ꢁ 82

ꢀ6 ꢀ7

81

84

ꢀ9 60

14 1ꢀ

8ꢀ

16

86 87

88

19

89

40

90

4ꢁ

9ꢁ 92

67

91

94

9ꢀ

46

96 97

98

99

ꢀ0

ꢁ00

ꢀ1 ꢀ4

ꢀꢀ

1ꢁ

ꢀ8

8

6ꢁ

62

61

ꢁ1

64

ꢁ4

6ꢀ

ꢁꢀ

66

ꢁ6

68

69

70

7ꢁ

72 71

74

7ꢀ

27

28

29 10

12

11

17 18

42

41

44 4ꢀ

ꢁ9

47

48 49

21

ꢀꢁ

ꢁ

2

1

4

ꢀ

6

7

9

ꢁ0

ꢁꢁ ꢁ2

ꢁ7

ꢁ8

20

2ꢁ

22

24 2ꢀ

26

.ꢁꢀ0

(1.8ꢁ3

.ꢁꢀ0

(1.8ꢁ3

100 Contacts

NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)

Part Number

By Shell Size

MDM-9PBS*

A

Max.

1.390 (35.31)

B

C

D

Max.

.785 (19.94)

E

Max.

F

Max.

G

Max.

H

Max.

J

K

Max.

± ±..07 ±ꢀ18

1.150 (29.21)

± ±..ꢁ7 ±ꢀꢂ8

.565 (14.35)

Max.

.334 (8.48)

.402 (10.21)

.484 (12.29)

.552 (13.97)

.634 (16.10)

.702 (17.83)

.734 (18.64)

.802 (20.37)

.884 (22.45)

.952 (24.18)

1.034 (26.26)

1.102 (27.99)

.984 (24.99)

1.052 (26.72)

1.384 (35.15)

1.508 (38.30)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.228 (5.79)

.296 (7.52)

.271 (6.88)

.394 (10.01)

.308 (7.82)

.351 (8.92)

.460 (11.68)

.165 (4.19) .355 (9.02)

.303 (7.70) .550 (12.70)

.555 (14.10)

.686 (17.42)

.686 (17.75)

MDM-9SBS*

MDM-15PBS*

MDM-15SBS*

MDM-21PBS*

MDM-21SBS*

MDM-25PBS

MDM-25SBS*

MDM-31PBS*

MDM-31SBS*

MDM-37PBS*

MDM-37SBS*

MDM-51PBS*

MDM-51SBS*

MDM-100PBS*

MDM-100SBS*

1.390 (35.31)

1.690 (43.93)

1.740 (44.20)

2.040 (51.82)

2.340 (59.44)

2.270 (67.66)

3.070 (77.98)

1.150 (29.21)

1.450 (36.83)

1.500 (38.10)

1.800 (45.72)

2.100 (53.34)

2.000 (50.80)

2.800 (71.12)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.785 (19.94)

.935 (23.75)

1.085 (27.56)

1.185 (30.10)

1.335 (33.91)

1.485 (37.72)

1.435 (36.45)

2.175 (55.24)

*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

19

Micro-D PCB - .050" Contact Spacing

MDM-PCB

BR (Board Right Angle) Series

JACKPOST

#2-ꢀ6 UNC-2B TYP.

.1ꢁ6 (4.72)

MAX. PLUG

.19ꢁ (ꢀ.0ꢀ)

MAX.

A

C

B

.12ꢀ .01ꢀ

(3.1ꢁ 0.3ꢁ)

D

.109 .01ꢀ

(2.77 0.3ꢁ)

E

G

.100

(2.ꢀ4)

TYP.

F

CAV.

#1

LAST

CAV.

.0ꢀ0

(1.27)

TYP.

.096 .00ꢀ

(2.44 0.31)

.1ꢀ0 .010

(3.ꢁ 0.2ꢀ)

.100 TYP.

PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)

Identification number shown for plug connector, use reverse order for socket connector.

.1ꢀ0

(3.ꢁ1)

.1ꢀ0

(3.ꢁ1)

.1ꢀ0

(3.ꢁ1)

.1ꢀ0

(3.ꢁ1)

6

7

ꢁ

9

14 1ꢀ 16 17 1ꢁ 19 20 21 22 23 24 2ꢀ

9

10 11 12 13 14 1ꢀ

12 13 14 1ꢀ 16 17 1ꢁ 19 20 21

.300

1

2

3

4

ꢀ

6

7

ꢁ

9 10 11 12 13

1

2

3

4

ꢀ

1

2

3

4

ꢀ

6

7

ꢁ

1

2

3

4

ꢀ

6

7

ꢁ

9 10 11

(7.62)

.37ꢀ

(9.ꢀ3)

.22ꢀ

(ꢀ.72)

.17ꢀ

(4.4ꢀ)

15 Contacts

9 Contacts

25 Contacts

21 Contacts

.0ꢀ0

(1.27)

.1ꢀ0

(3.ꢁ1)

.1ꢀ0

(3.ꢁ1)

36 37 3ꢁ 39 40 41 42 43 44 4ꢀ 46 47 4ꢁ 49 ꢀ0 ꢀ1

19 20 21 22 23 24 2ꢀ 26 27 2ꢁ 29 30 31 32 33 34 3ꢀ

17 1ꢁ 19 20 21 22 23 24 2ꢀ 26 27 2ꢁ 29 30 31

20 21 22 23 24 2ꢀ 26 27 2ꢁ 29 30 31 32 33 34 3ꢀ 36 37

.1ꢀ0

(3.ꢁ1)

1

2

3

4

ꢀ

6

7

ꢁ

9 10 11 12 13 14 1ꢀ 16 17 1ꢁ

1

2

3

4

ꢀ

6

7

ꢁ

9

10 11 12 13 14 1ꢀ 16

.1ꢀ0

1

2

3

4

ꢀ

6

7

ꢁ

9

10 11 12 13 14 1ꢀ

1ꢁ 19

.1¹ꢀ⁶0¹⁷

(3.ꢁ1)

51 Contacts

37 Contacts

31 Contacts

.0ꢀ0

(1.27)

76 77 7ꢁ 79 ꢁ0 ꢁ1 ꢁ2 ꢁ3 ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁꢁ ꢁ9 90 91 92 93 94 9ꢀ 96 97 9ꢁ 99 100

ꢀ2 ꢀ3 ꢀ4 ꢀꢀ ꢀ6 ꢀ7 ꢀꢁ ꢀ9 60 61 62 63 64 6ꢀ 66 67 6ꢁ 69 70 71 72 73 74 7ꢀ

.1ꢀ0

27 2ꢁ 29 30 31 32 33 34 3ꢀ 36 37 3ꢁ 39 40 41 42 43 44 4ꢀ 46 47 4ꢁ 49 ꢀ0 ꢀ1

(3.ꢁ1)

1

2

3

4

ꢀ

6

7

ꢁ

9

10 11 12 13 14 1ꢀ 16 17 1ꢁ 19 20 21 22 23 24 2ꢀ 26

100 Contacts

NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dripped.

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).

Part Number

By Shell Size

A

Max.

B

C

D

Max.

E

Max.

F

Max.

G

Max.

.007 (.18)

.005 (.13)

MDM-9PBR*

MDM-9SBR*

MDM-15PBR*

MDM-15SBR*

MDM-21PBR*

MDM-21SBR*

MDM-25PBR*

MDM-25SBR*

MDM-31PBR*

MDM-31SBR*

MDM-37PBR*

MDM-37SBR*

MDM-51PBR*

MDM-51SBR*

MDM-100PBR*

MDM-100SBR*

1.390 (35.31)

1.540 (39.12)

1.690 (42.93)

1.790 (45.47)

2.040 (51.82)

2.040 (51.52)

2.340 (59.44)

1.875 (47.63)

2.74 (69.72)

1.150 (29.21)

1.300 (33.02)

1.450 (36.83)

1.550 (39.37)

1.800 (45.72)

2.100 (53.34)

1.600 (40.64)

2.500 (63.50)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.334 (8.48)

.402 (10.21)

.484 (12.29)

.552 (13.97)

.634 (16.10)

.702 (17.83)

.734 (18.64)

.802 (20.37)

.884 (22.45)

.952 (24.18)

1.034 (26.26)

1.102 (27.99)

.984 (24.99)

1.052 (26.72)

1.384 (35.15)

1.508 (38.10)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.228 (5.79)

.296 (7.52)

.271 (6.88)

.394 (10.01)

.455 (11.56)

.565 (14.35)

.755 (19.18)

.308 (7.82)

.351 (8.92)

.394 (10.01)

*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

20

Micro-D PCB - .050" Contact Spacing

MDM-PCB

CBR (Condensed Board Right Angle) Series

JACKPOST 2-56

UNC-2B TYP.

LAST

A

C

(Size 9-51)

E

CAV.

.109 .015

(2.77 0.38)

+

D

JACKPOST

.186 (4.72)

.185

#4-40 UNC 2B TYP.

CAV.

#1

MAX.PLUG

.198 (5.03)

(4.70)MAX.

C

B

MAX. RECEPT.

H

G

H

G

F

.096 .005

SEE

VIEW X

F

(2.44 0.31)

DIA.TYP.

.125 .005

SEE

(3.18 0.31)

DIA. TYP.

* *

VIEW Y

(Size 9-51)

* *FOR 31: 1.085(27.56) MAX.

FOR 37: 1.185(30.10) MAX.

FOR 51: 1.225(31.12) MAX.

1.815 (46.10) MAX.

SEE

VIEW W

100 VIEW

PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)

Identification number shown for plug connector, use reverse order for socket connector.

.108

.100 (2.54)

TYP.

.083

.083 (2.11)

(2.73)

(2.11)

8

6

4

3

2

11 10

12

.020

7

5

4

2

10

6

5

3

2

8

.020

9

7

5

15

1

13 24 22

25 23 21

17

(0.51)

.020

8

6

12

3

1

9

7

4

1

5

4

2

1

11

17

14

(0.51)

14

20 19 18 16

(0.51)

15 14 13 11 10

9

21 20 19 18 16 15 13 12

.020

9

8

3

7

6

(0.51)

.050 (1.27)

TYP.

25 Contacts

View X

15 Contacts

View X

21 Contacts

View X

9 Contacts

View X

.325 (8.26)

.275 (6.98)

.183

(4.65)

.158 (4.00)

15 13 11

9

8

6

4

2

27

15 13 11

18 16 14 12 10

35 33 31 29 46 43 41 25 23 21 19

28 45 42 26 24 22 20

8

6

4

2

17

25 23 21

9

7

5

3

1

19

15 13 11

16 14 12 10

35 33 31

17

15 13 11

7

5

3

1

9

19 17

16 14 12 10 24

30 29 27 25 23 21 19 17

31 28 26 22 20 18

7

5

3

1

7

5

3

1

9

8

6

4

2

26 24 22 20 18

18 16 14 12 10

8

6

4

2

51 49 47 45 43 41 39

27

37

29

37 35 33 31

36 34 32 30

29

24

27 25 23 21

28 26

22 20

.050

50 48 46 44 42 40 38 36 34 32 30 28

75 73 71 69 67 65 63 61 59 57 55 53

34 32 30

.020

(1.27)

51 50 49 48 47 44 40 39 38 37 36

(0.51)

.100 .005

74 72 70 68 66 64 62 60 58 56 54 52

.108

(2.54 0.13)

100 98 96 94 92 90 88 86 84 82 80 78 76

(2.73)

99 97 95 93 91 89 87 85 83 81 79 77

31 Contacts

View Y

37 Contacts

View Y

51 Contacts

View Y

100 Contacts

View W

NOTE: Standard lead termination is #24 AWG, solid copper,

solder or tin dripped.

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).

Part Number

By Shell Size

A

B

C

D

E

F

G

H

Max.

.005 (.13)

Max.

.010 (.25)

.230 (5.81)

.130 (3.30)

.150 (3.81)

.200 (5.08)

MDM-9PCBR*

MDM-9SCBR*

MDM-15PCBR*

MDM-15SCBR*

MDM-21PCBR*

MDM-21SCBR*

MDM-25PCBR*

MDM-25SCBR*

MDM-31PCBR*

MDM-31SCBR*

MDM-37PCBR*

MDM-37SCBR*

MDM-51PCBR*

MDM-51SCBR*

MDM-100PCBR*

MDM-100SCBR*

.785 (19.94)

.935 (23.75)

1.085 (27.56)

1.185 (30.10)

1.335 (33.91)

1.485 (37.72)

1.435 (36.45)

2.170 (55.12)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.334 (8.48)

.402 (10.21)

.484 (12.29)

.552 (13.97)

.634 (16.10)

.702 (17.83)

.734 (18.64)

.802 (20.37)

.884 (22.45)

.952 (24.18)

1.034 (26.26)

1.102 (27.99)

.984 (24.99)

1.052 (26.72)

1.384 (35.15)

1.508 (38.10)

.308 (7.82)

.351 (8.92)

.394 (10.01)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.184 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.228 (5.79)

.296 (7.52)

.271 (6.88)

.394 (10.01)

.420 (10.67)

.520 (13.21)

.650 (16.15)

1.000 (25.40)

.250 (6.35)

.300 (7.62)

.400 (10.16)

*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

21

Micro-D Coaxial/Power - .050" Contact Spacing

MDM C/P

MDM Coaxial

MDM Power

The MDM Metal Shell Connectors have been

tooled in several coaxial layouts and offer the

versatility of combining coaxial and signal lines

in the same connector. Any modifications to

these layouts or new requirements, please con-

sult the factory. Standard coax is RG178 white.

The same insulator that is used with coaxial contacts is

available with power contacts. This offers the versatility of

combining power and signal lines in the same connector.

MDM Coaxial/Power

Power and coaxial contacts can be interchanged as

desired. Power contacts are rated at 13 amps, 24V rms,

AWG #16 stranded.

How to Order

For 83513-Style ordering information see pages 16 and 17

R

MDM

-

51

P

H

001

P

- XXX

RoHS COMPLIANCE

SERIES

MDM: (Size 9-100) Liquid Crystal Polymer (LCP)

MDM: (Combo Layout) Diallyl Phthalate (DAP)

CONTACT ARRANGEMENTS

CONTACT TYPE

CONTACT ARRANGEMENTS

9-15-21-25-31-37-51-100 (standard)

16C5, 10C10, 7C2, 24C4 (coaxial)

TERMINATION TYPE

TERMINATION CODE

HARDWARE

16P5, 10P10, 7P2, 24P4 (power)

or combination of

coax and power

}

SHELL FINISH MOD CODES

CONTACT TYPE

P - Pin

S - Socket

(L) 1 - 1/2" uninsulated solid #25

AWG gold plated copper.

(L) 2 - 1" uninsulated solid #25 AWG

gold plated copper.

F - Float mount

B - No hardware standard

.091 (2.31) dia. hole for sizes 9-51;

.120 (3.05) dia. hole for size 100.

A - .125 (3.18) dia. mounting holes for sizes 9-51;

.166 (4.22) dia. hole for size 100.

B1 - .1475 (3.75) dia. hole for size 100

(Per 83513-Style)

TERMINATION TYPE

H - Harness-insulated wire.

L - Solid-uninsulated wire.

S - Solder pot to accept #26 AWG MAX.

harness wire. (Not available with power

contact arrangements.)

SHELL FINISH MOD CODES

No Number - (Standard cadmium/yellow

chromate over nickel

A174 - Electroless nickel

A172 - Gold over nickel

A141 - Irridite/alodine

HARDWARE

TERMINATION CODE*

M - Military specification hardware, see

page 11 for military hardware codes.

P - Jackpost

K - Jackscrew-standard profile

L - Jackscrew-low profile

(H) 001 - 18",7/34 strand,#26 AWG,

MIL-W-16878/4, Type E Teflon, yellow.

(H) 003 - 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

color coded to MIL-STD-681 System I.

A30 - Black anodize

*See page 79 and 81 for additional Termination codes.

7C2/7P2

.186 (4.92) MAX.

.199 (5.05) MAX.

1.185 (30.10) MAX.

308 (7.82)

.965 .005

(24.51 0.13)

MAX

(24.51 0.13)

.416 (10.57)

MAX.

.429 (10.90)

MAX.

.308 (7.82) MAX.

+

.100

(2.54)

MAX.

.100

(2.54)

MAX.

.800

(20.32)

MAX.

.800

(20.32)

MAX.

.091 .003

(2.31 0.08)

.091 .003

(2.31 0.08)

DIA.

Plug

Receptacle

24C4/24P4

.186 (4.92)

MAX.

.199 (5.05)

MAX.

1.435 (36.45) MAX.

1.215 .005

(30.86 0.13)

1.215 .005

(30.86 0.13)

.351 (8.92)

MAX.

.351 (8.92)

MAX.

+

.100

(2.54)

MAX.

.429 (10.90)

MAX.

.416 (10.51)

MAX.

.100

(2.54)

MAX.

1.050

(26.67)

MAX.

.091 .003

(2.31 0.08)

.091 .003

(2.31 0.08)

DIA.

1.050

(26.67)

MAX.

Plug

Receptacle

Power Contacts

Coaxial Contacts

BACK POTTING

REQUIRED

.350 (8.89)

MAX.

Plug

Receptacle

Plug

Receptacle

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

22

Microminiature Connectors

Hermetic-MDMH

MDMH connectors are ideal for applications

Features

requiring a better seal than can be achieved

with epoxy resins.

• Hermetically sealed connector designed for

those applications where a vacuum, inert

gas or a constant controlled pressure are

required to eliminate adverse effects creat-

ed by atmospheric changes.

The connector utilizes size 24 AWG contacts

that are compression glass sealed through a

steel shell and into a diallyl pthalate front end

insulator. An interfacial seal provides

environmental protection when mated. We

recommend MDMH receptacles be soldered

to the chassis or container for a completely

leak-proof joint.

• Steel shells to provide greater strength, pre-

vent chipping, cracking or breaking, offer

electro-magnetic (EMI) and RFI shielding.

• Silicone elastomer compression interfacial

seal to provide a moisture and humidity

seal between each contact and between

contacts and shell.

MDMH receptacles mate with standard MDM

plugs.

Specifications

Standard materials & finishes

Shell Mild steel, tin-lead plated

Insulator Glass filled diallyl phthalate per MIL-M-14. Type SDGF

Contacts Copper alloy, gold plated sockets on mild steel gold plated pins. Solder pots - mild steel gold plated

Hermetic seal Compression glass

Leak rate 1 micron cubic ft/hr max (1.04 x 10-5 cc/sec at 1 ATM pressure differential)

ELECTRICAL DATA

No. of contacts 9 to 100

Dielectric withstanding voltage 150 VAC

Insulation resistance 5000 Mohm minimum

Wire size #26 through #30 AWG

Contact termination Solder pot

MECHANICAL FEATURES

Size or length 8 sizes

Service class Hermetically sealed

Coupling Friction/jacks

Polarization Keystone shaped shells

Contact spacing .050 (1,27) centers

Shell style Receptacle, solder mount

How to Order

MDMH – 51

S

Hermetic Micro D Receptacle Series

Contact layout

9, 15, 21, 25, 31, 37, 51, 100

Socket Contacts (only)

Termination type

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

23

Microminiature Connectors

Hermetic-MDMH

Contact Arrangements

Face vew of socket insert - use reverse order for wiring side.

13 12 11 10

9

8

7

6

5

4

3

2

1

5

4

3

2

1

11 10

9

8

7

6

5

4

3

2

1

8

7

6

5

4

3

2

1

9

8

7

6

21 20 19 18 17 16 15 14 13 12

15 14 13 12 11 10

9

25 24 23 22 21 20 19 18 17 16 15 14

9 Contacts

21 Contacts

15 Contacts

25 Contacts

18 17 16 15 14 13 12 11 10

9

8

7

6

5

4

3

2

1

19 18 17 16 15 14 13 12 11 10

9

8

7

6

5

4

3

2

1

16 15 14 13 12 11 10

9

8

7

6

5

4

3

2

1

35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19

37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17

51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36

31 Contacts

37 Contacts

51 Contacts

1

2

3

4

5

6

7

8

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

100 Contacts

Contact identification numbers are for reference only and do not appear on insulator or connector body.

Shell Dimensions

6,61

(.260)

MAX

A

B

F

4,58

(.180)

MAX

D

G

E

2 HOLES 2-56 UNC (9-51 WAY)

4-40 UNC (100 WAY)

5,06 (.199) MAX

1,93

(.076)

MAX

C

Part Number

by shell size

A

max

B

max

C

max

D

max

E

max

F

G

max

.005 (0,13)

MDMH-9S

.885 (22,48)

1.035 (26,29)

1.185 (30,10)

1.285 (32,64)

1.435 (36,45)

1.585 (40,26)

1.535 (38,99)

2.275 (57,78)

.738 (18,74)

.888 (22,55)

1.038 (26,36)

1.137 (28,87)

1.288 (32,72)

1.438 (36,53)

1.388 (35,26)

2.078 (52,78)

.400 (10,16)

.550 (13,97)

.770 (17,78)

.800 (20,32)

.950 (24,13)

1.100 (27,94)

1.050 (26,67)

1.455 (36,97)

.270 (6,86)

.270 (6,86

.270 (6,86)

.310 (8,00)

.365 (9,27)

.430 (10,92)

.473 (12,01)

.522 (13,26)

.565 (14,35)

.715 (18,16)

.865 (21,97)

.965 (24,51)

1.115 (28,32)

1.265 (32,13)

1.215 (30,86)

1.800 (45,72)

.261 (6,63)

.315 (8,00)

.410 (10,41)

MDMH-15S

MDMH-21S

MDMH-25S

MDMH-31S

MDMH-37S

MDMH-51S

MDMH-100S

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

24

Microminiature Connectors

Filter-TMDM

With an increasing number of MDM connec-

Features

tors being used in avionics and military equip-

ment and with increasing emphasis being put

on EMI, RFI and EMP shielding, Cannon have

developed a range of filter connectors to suit

most applications.

•

Transverse monolith filter for EMI and RFI

shielding.

•

Rugged aluminum one piece shell.

Silicone interfacial environmental seal.

Glass filled diallyl phthalate insulator.

A variety of filter types for each pin.

The TMDM receptacle accommodates from 8

to 37 sizes, 24 AWG socket contacts on 1,27

(.050) centres and mates with the standard

MDM plugs.

Specifications

Standard materials & finishes

Shell Aluminum alloy per QQ-A-200/8 with electroless nickel finish per QQ-N-290

Insulator Glass filled diallyl phthalate per MIL-M-14. Type SDGF

Contact, socket Copper alloy, 50 microinch gold per MIL-G-45204, Type ll, Class l

Interfacial seal Silicone base rubber

ELECTRICAL DATA

No. of contacts 9 to 37

Dielectric withstanding voltage 300 VAC

Insulation resistance 5000 Mohm at 100 VDC

Voltage rating (working) 100 VDC

Current rating 3 amps max.

Maximum capacitance 250, 500, 1000, 2000 picofarads

Filter type

C

MECHANICAL FEATURES

Size or length 6 sizes

Coupling Friction/jackscrews

Polarization Keystone shaped shell

Contact spacing .050 (1,27) centers

Shell style Single piece receptacle

How to Order

TMDM – C1 15

S

H

001 B-

*

Series

Filter type

Number of contacts

Contact style

Termination type

Termination/modifier code

Mounting code

Modification code

Series:

Termination type:

low profile

Filter TMDM - Micro “D” - Metal housing

H - harness, insulated solid or stranded wire

L - lead, solid uninsulated wire

M3 - Allen head jackscrew assembly,

high profile

Filter type:

M5 - Slot head jackscrew assembly,

low profile

“C” capacitor type

Termination:

C1

C2

C3

C4

150 - 250 pF capacitance

300 - 500 pF capacitance

700 - 1000 pF capacitance

1300 - 2000 pF capacitance

Consult standard wire termination code for lead

material and lead length

M6- Slot head jackscrew assembly,

high profile

M7 - Jacknut assembly

P - Jackpost

Mounting code:

A - Flange mounting, Ø.125 (3,18)

mounting holes

Number of contacts:

Modification code:

B - Flange mounting, Ø.092 (2,34)

mounting holes

9, 15, 21, 25, 31, 37 only

Shell finish MOD. Codes. *

To be assigned as required

Contact style:

L - Low profile (slotted head)

M2 - Allen head jackscrew assembly,

S - socket (receptacle)

P - Pin (plug)

* No number = Standard tin/lead finish

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

25

Microminiature Connectors

Filter-TMDM

Guaranteed Minimum Attenuation

Filter

designation

Capacitance

range (pF)

Minimum Insertion Loss-decibels

10 MHz

15 MHz

30 MHz

50 MHz

100 MHz

200 MHz

500 MHz

1 GHz

35

C1

C2

C3

C4

150 - 250

300 - 500

4

6

15

18

25

30

20

25

38

40

3

7

12

17

23

40

700 - 1000

1300 - 2000

3

8

13

18

48

5

13

50

Standard Wire Termination Codes

Cannon Modification Codes – (Not Mil Spec)

The following termination codes are listed for your information. For additional codes

please refer to Appendix on page 79 and 81. All wire lengths are minimum.

Harness Type (H) #26 AWG per

Solid Uninsulated Type (L)

MIL-W-16878/4 Type E Teflon, stranded

#25 AWG gold plated copper.

Code

L61

L56

L57

L39

L58

L1

Length

.125 (.18)

Length

All Yellow Color Coded

3

6

8

(76.2)

(152.4)

(203.2)

H020

H019

H026

H029

H028

H001

H038

H009

H010

H011

H013

H017

H042

H027

H016

H034

H025

H002

H003

H023

H004

H005

H006

H048

H046

H041

.150 (3.81)

.190 (4.83)

.250 (5.35)

.375 (9.52)

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

24 (509.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.8)

120 (3048.0)

L14

L2

L7

L6

L10

Shell Dimensions

A

F

B

5,06

(.199)

MAX

7,60

(.299)

MAX

10,90

(.500)*

MAX

E

G

D

2 HOLES

Ø2,32 (.091)

0,08 (.003)

C

*.750 max for pre-wired versions (H modifier above)

Part Number

by shell size

A

max

B

max

C

max

D

max

E

max

F max

0,13 (.005)

G

max

MDMT-9S*

MDMT-15S*

MDMT-21S*

MDMT-25S*

MDMT-31S*

MDMT-37S*

.785 (19,94)

.935 (23,75)

1.085 (27,60)

1.185 (30,10)

1.335 (33,90)

1.485 (37,70)

.400 (10,16)

.550 (13,97)

.700 (17,78)

.800 (20,32)

.950 (24,13)

1.100 (28,00)

.270 (6,86)

.308 (7,83)

.565 (14,36)

.715 (18,17)

.865 (21,98)

.965 (24,52)

1.115 (28,30)

1.265 (32,20)

.251 (6,38)

.550 (13,97)

.700 (17,78)

.800 (20,32)

.950 (24,13)

1.100 (28,00)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

26

Microminiature Connectors

Filter-TMDM

Typical Filter Performance

70

60

50

40

30

20

10

1300-2000 pF

700-1000 pF

300-500 pF

150-250 pF

0

1

10

100

FREQUENCY (MHz)

1000

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

27

Micro-D Plastic Shell - .050" Contact Spacing

MD**

Microminiature Rectangular Connectors

with MICRO-Pin Contacts on .050 (1.27)

centers.

ITT can also terminate a wide variety of

stranded or solid wire directly to MICRO-D

contacts, which is often desirable in high den-

sity arrangements.

• Glass-filled diallyl phthalate thermoset

material used in high temperature applica-

tions that is immune to cleaning solvents.

It also has excellent dielectric properties.

Temperature range: -65˚F to +300˚F

(-55˚C to +149˚C).

MICRO-D microminiature rack/panel connec-

tors are used in applications requiring highly

reliable, extremely small, lightweight connec-

MICRO-D connectors can also be custom har-

nessed to meet any customer requirement of

tors. These connectors are available in 2 insu- single or multiple connectors. Pigtail lead and

• Glass-filled polyester thermoplastic that is

not affected by cleaning solvents and

exhibits excellent dielectric properties.

Temperature range: -55˚F to +257˚F

(-65˚C to +125˚C).

lator materials, 2 mounting variations, 7 shell

sizes accommodating from 9 to 51 contacts

harness description must be given by the cus-

tomer. A typical description would be: .5" #25

and a special arrangement of 5 micro contacts AWG, gold plated copper leads or 18" of #26

and 2 coaxials. The insulator materials listed

give the MICRO-D connector wide versatility

in most applications required by industry.

yellow, Teflon-insulated, Type E wire. Shown

below are various methods of termination.

Consult customer service for any routine or

complex harnessing of MICRO-D connectors.

Specifications

MATERIALS AND FINISHES

ELECTRICAL DATA

Shell/Insulator (One Piece) MD/MDB: Glass-filled

thermoset plastic

No of Contacts

- 9 to 51: (1 arrangement of 5

contacts and 2 coaxials - for

screw mount only)

MDV/MDVB:

Thermoplastic

Coaxial Cable

Wire Size

- RG-178/U (Not available for

MD clip mount)

- #24 thru #32 AWG

Contacts

- Copper alloy, gold plate

Contact Termination - Multi-indent crimp

MECHANICAL FEATURES

Size or Length

Coupling

- 7 sizes

- Friction/jackscrews

- Keystone-shaped shells

-.050 (1.27mm)

Polarization

Contact Spacing

Centers

Shell Styles

- Plug and receptacle

Consult factory for availabilty.

How to Order

MD**

1-

9

P

H

001

P

R

PCB ordering information - page 30

RoHS COMPLIANCE

SERIES-INSULATOR STYLE-MATERIAL

CONTACT SPACING

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODE

LOCKING HARDWARE

SERIES-INSULATOR STYLE-MATERIAL

MDB - Screw mounting-Diallyl phthalate

MDVB - Screw mounting-Polyester

TERMINATION TYPE

LOCKING HARDWARE (SCREW MOUNTING ONLY)

P - Jackpost

K - Jackscrew-standard

H - Insulated solid or stranded wire

L - Uninsulated solid wire

L - Jackscrew-low profile

F - Float mount

M - Military specification hardware, see page 13.

S - Solder pot to accept #26 AWG max.

harness wire.

CONTACT SPACING

1 - .050 (1.27) centers

TERMINATION CODE

CONTACT ARRANGEMENT

See page 79 and 81 for additional codes

No designator - No hardware - standard mounting

.091 (2.31) hole diameter

9-15-21-25-31-37-51. See page 9

(H) 001 - 18", 7/34 strand, #26 AWG,

CONTACT TYPE

MIL-W-16878/4, Type E Teflon, Yellow.

P - Pin

S - Socket

(H) 003 - 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon, color

coded to MIL-STD-681 System I.

(L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper.

(L) 2 - 1" uninsulated solid #25 AWG gold plated copper.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

28

Micro-D Plastic Shell - .050" Contact Spacing

MDB/MDVB

Standard Wire Termination Codes

The following termination codes are listed for your information. For additional codes please refer to Appendix

on page 79 and 81. All wire lengths are minimum.

Harness Type (H)

Solid Uninsulated Type (L)

#25 AWG Gold Plated Copper

Termination Code

#26 AWG per MIL-W-16878 Type E Teflon, stranded.

Length

3 (76.2)

All Yellow

H020

H019

H026

H029

H028

H001

H038

H009

H010

H011

H013

H017

H042

Color Coded*

H027

Length

.125 (3.18)

L61

L56

L57

L39

L58

L1

6 (152.4)

H016

.150 (3.81)

8 (203.2)

H034

.190 (4.83)

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

24 (609.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.8)

120 (3048.0)

*Cavity #1 black

H025

.250 (6.35)

H002

.375 (9.52)

H003

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

H023

L14

L2

H004

H005

L7

H006

L6

H048

L16

L10

H046

H041

With Screw Mounting Holes (Conforms to 83513-Style)

Glass-filled Diallyl Phthalate

Plastic Insulator

Glass-filled Polyester

Plastic Insulator

MDB

MDVB

B

.110

(2.79)

MAX.

.204 (5.18)

MAX.

.304 (7.72)

MAX.

TWO MTG. HOLES .091 .003

(2.31 0.08)

.395 (10.03)

MAX.

D

F

.200

(5.08)

MAX.

.100 (2.54)

MAX.

C

+

E

Solder Pot

A

.154

(3.91)

MAX.

.185 (4.70)

MAX.

B

F

.285 (7.24)

MAX.

D

.375 (9.92)

MAX.

+

E

.200

(5.08)

Solder Pot^MAX.

.100 (2.54)

MAX.

C

A

Avg.

Weight***

05 ꢁ(z.ꢂ

05 ꢁgm.ꢂ

A

Max.

B

Max.

C

Max.

D

Max.

E

Max.

F

.ꢀꢀ0

Part Number by Shell Size

MDB1-9P**

MDB1-9S**

MDB1-10P**

MDB1-10S**

MDB1-21P**

MDB1-21S**

MDB1-20P**

MDB1-20S**

MDB1-31P**

MDB1-31S**

MDB1-37P**

MDB1-37S**

MDB1-01P**

MDB1-01S**

MDVB1-9P**

.788 (20.02)

.938 (23.82)

1.088 (27.64)

1.188 (30.18)

1.338 (33.98)

1.488 (37.80)

.292 (7.42)

.380 (9.65)

.408 (10.36)

.588 (14.17)

.708 (17.98)

.808 (20.56)

.958 (24.33)

1.108 (28.14)

1.058 (26.87)

.173 (4.39)

.220 (5.59)

.218 (5.54)

.260 (6.60)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.115 (38.32)

1.265 (32.13)

1.215 (30.86)

.026 (0.73)

.025 (0.70)

.038 (1.10)

.035 (1.00)

.053 (1.50)

.050 (1.40)

.063 (1.80)

.056 (1.60)

.080 (2.30)

.073 (2.10)

.086 (2.45)

.076 (2.15)

.109 (3.10)

.093 (2.64)

MDVB1-9S**

MDVB1-10p**

MDVB1-10S**

MDVB1-21P**

MDVB1-21S**

MDVB1-20P**

MDVB1-20S**

MDVB1-31P**

MDVB1-31S**

MDVB1-37P**

MDVB1-37S**

MDVB1-01P**

MDVB1-01S**

.442 (11.23)

.530 (13.46)

.592 (15.04)

.680 (17.27)

.692 (17.58)

.780 (19.81)

.842 (21.39)

.930 (23.62)

.992 (25.20)

1.488 (37.80) 1.080 (27.43)

1.438 (36.52) .942 (23.93)

1.438 (36.52) 1.030 (26.16)

** Add lead type and length, see Part Number Explanation.

*** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

29

Micro-D Plastic Shell - .050" Contact Spacing

MD*B-PCB

Jackpost mounting for use with locking hard-

ware is also available.

MD*B-PCB connectors use standard MD*B all

plastic shells and are designed for use with

flex circuitry, printed circuit and multi-layer

boards. They are easily mounted and soldered

and provide high density/high reliability in

board-to-board and board-to-cable applica-

tions. While being similar to the MDM-PCB

connectors, the MD*B-PCB connectors are all

plastic, extremely small, and lightweight yet

rugged enough for use in the most demanding

applications.

If the connectors shown in the catalog do

not meet the requirements of your applica-

tions, a special shape, size or layout using

the basic all plastic shell can be made avail-

able. For further technical and applications

information, contact customer service.

MD*B-PCB connectors are available in

seven shell sizes with 9 to 51 contacts in the

popular 90° narrow profile PCB termination,

with a variety of tail lengths for varying board

thickness.

How to Order

MD*B

-

37

S

CBR * L39

-

* * *

R

RoHS COMPLIANCE

SERIES

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

HARDWARE

TERMINATION TAIL LENGTH

MODIFICATION CODES

(Consult Factory)

CONNECTOR SERIES

HARDWARE

P = Jackpost

MDVB, MDB

M7 = Jackposts, M635135-07

No Letter = Less Hardware

CONNECTOR ARRANGEMENT

9, 15, 21, 25, 31, 51

TERMINATION TAIL LENGTH CODES

CONTACT TYPE

S = Socket

P = Pin

NONE – .109 (2.77) 0.15 (0.38) Standard

L61

L66

L57

L39

L58

– .125 (3.18)

– .150 (3.81)

– .190 (4.83)

– .250 (6.35)

– .375 (9.52)

TERMINATION TYPE

CBR = 90° Narrow Profile PCB Terminations

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

30

Micro-D Plastic Shell - .050" Contact Spacing

MD*B-PCB

CBR Series (90˚ Mounting Narrow Profile)

LAST

CAV

JACKPOST 2-56 UNC-2B

TYP.

A

C

.109 +_ .015

(3.77 +_ 0.38)

+

E

D

H

CAV.

#1

G

B

F

.186 (4.72) PLUG

.199 (5.05) RECEPTACLE

*

* FOR 31: 1.085 (27.56) MAX.

FOR 37: 1.185 (30.10) MAX.

FOR 51: 1.225 (31.12) MAX.

G

H

F

.096 +_ .005

(2.44 +_ 0.31) DIA. TYP

9-15-21-25 VIEW

PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.)

Indentification number shown for plug connector, use reverse order for socket connector.

.083

.108

.100 (2.54)

TYP.

.083

.083 (2.11)

(2.11)

(2.73)

(2.11)

4

3

2

11 10

8

6

12

.020

10

6

5

3

2

8

7

5

4

2

.020

9

7

5

15

1

13 24 22

25 23 21

17

(0.51)

9

7

4

1

11

17

14

5

4

2

1

8

6

12

3

1

(0.51)

14

20 19 18 16

21 20 19 18 16 15 13 12

15 14 13 11 10

9

.020

(0.51)

.020

9

8

3

7

6

(0.51)

.050 (1.27)

TYP.

9 Contacts

25 Contacts

21 Contacts

15 Contacts

27

15 13 11

18 16 14 12 10

8

6

4

2

17

7

5

3

1

9

.158 (4.00)

15 13 11

9

8

6

4

2

.183

(4.65)

35 33 31

34 32 30

25 23 21

19

29 46 43 41

.050

16 14 12 10 24

30 29 27 25 23 21 19 17

31 28 26 22 20 18

7

5

3

1

28 45 42 26 24 22 20

15 13 11

7

5

3

1

9

19 17

(1.27)

51 50 49 48 47 44 40 39 38 37 36

18 16 14 12 10

8

6

4

2

.108

37 35 33 31

36 34 32 30

29

24

27 25 23 21

28 26

22 20

.020

(2.73)

(0.51)

.020

51 Contacts

31 Contacts

(0.51)

37 Contacts

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)

Part Number

By Shell Size

A

B

C

D

E

F

G

H

Max.

.005 (0.13)

Max.

.010 (0.25)

.230 (5.84)

.130 (3.30)

.150 (3.81)

MD*B-9PCBR*

MD*B-9SCBR*

MD*B-15PCBR*

MD*B-15SCBR*

MD*B-21PCBR*

MD*B-21SCBR*

MD*B-25PCBR*

MD*B-25SCBR*

MD*B-31PCBR*

MD*B-31SCBR*

MD*B-37PCBR*

MD*B-37SCBR

MD*B-51PCBR*

MD*B-51SCBR

.788 (20.01)

.938 (23.82)

1.088 (27.63)

1.188 (30.17)

1.338 (33.98)

1.488 (37.79)

1.438 (36.52)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

.292 (7.42)

.375 (9.52)

.218 (5.54)

.258 (6.55)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.177 (4.50)

.258 (6.55)

.420 (10.67)

.520 (13.21)

.550 (13.97)

.250 (6.35)

.300 (7.62)

.442 (11.23)

.525 (13.34)

.592 (15.04)

.675 (17.14)

.692 (17.58)

.775 (19.68)

.842 (21.39)

.925 (23.50)

.994 (25.25)

1.075 (27.30)

.942 (23.93)

1.026 (26.06)

* For jackpost locking add letter "P" or "M7".

NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

31

Micro-D Plastic Shell - .050" Contact Spacing

MDB Coaxial

MDB Coaxial Series with Screw Mounting Holes

MDB connectors with two coaxial and five MICRO-

PIN^TM/MICROSOCKET^TMcontacts. Crimp-type coaxial

contacts accommodate RG-178/U cables. A plastic

insertion/extraction tool is supplied with each connec-

tor assembly having removable coaxial assembly.

How to Order - MDB Coaxial

MDB

1

-7 C2

*

S

H

* *

*

K

R

RoHS COMPLIANCE

SERIES

SIGNAL CONTACT SPACING

TOTAL CONTACT CAVITIES

NUMBER OF COAXIALS

COAXIAL TYPE

SIGNAL CONTACT TYPE

SIGNAL CONTACT LEAD TYPE

SIGNAL CONTACT LEAD LENGTH

MODIFICATION

HARDWARE

COAXIAL TYPE

SERIES

Micro-D Coaxial

SIGNAL CONTACT LEAD LENGTH

See Standard Wire Termination

No Letter - Coaxial assembly

installed and nonremovable

RO - coaxial assembly ordered

serparately

Code on page 29. Coaxial cable will be

RG-178U unless otherwise specified; length

will be same as wire modification.

SIGNAL CONTACT SPACING

1 - .050 (1.27) centers

RA - Coaxial shipped assembled

but uninstalled

TOTAL CONTACT CAVITIES

. . . . . . . . . . . . . . . . . . .7

MODIFICATION

Consult customer service

. . . . . . . . . . . . . . . . . . . . . 2

NUMBER OF COAXIALS

SIGNAL CONTACT TYPE

HARDWARE

No letter - No hardware

P - Pin

S - Socket

standard mounting. 091 (2.31) hole diameter

F - Float

K - Jackscrew (standard)

L - Jackscrew (low profile)

P - Jackpost

SIGNAL CONTACT LEAD TYPE

L - Uninsulated, solid wire

H - Insulated, solid or stranded

S -Solder pot*

* Not available with removalbe coax cable type

connectors RO and RA.

How to Order - Coaxial Cable Assemblies

MD

CC

S

*

* * *

R

RoHS COMPLIANCE

SERIES

COAXIAL CABLE

CONTACT TYPE

COAXIAL CABLE TYPE

COAXIAL CABLE LENGTH

SERIES

COAXIAL CABLE LENGTH

See Standard Wire Termination

CONTACT TYPE

P - Pin

MD

COAXIAL CABLE

CC

Codes on page 29. Coaxial cable will be

RG-178U unless otherwise specified; length

will be the same as wire modfication.

(used with socket side connection)

S - Socket

(used with pin type connection)

COAXIAL CABLE TYPE

1 - RG178/U

Dimensions shown in inch (mm)

www.ittcannon.com

32

Micro-D Plastic Shell - .050" Contact Spacing

MDB Coaxial

Dimension - MDB Coaxial Series

(See page 9 for layouts)

A

TWO MTG. HOLES

B

C

.091 +_ .003 (2.31 +_ 0.08) DIA.

.190 (4.83) Max.

Plug

E

E1

.250 (6.35) MAX.

+

.625 (15.88)

MAX.

EXTENSION FOR

RO AND RA

COAXES

D

1.000 (25.40) MAX.

Receptacle

A

TWO MTG. HOLES

.190 (4.83) Max.

.091 +_ .003 (2.31 +_ 0.08) DIA.

B

C

E

E1

.250 (6.35) MAX.

+

.625 (15.88)

MAX.

EXTENSION FOR

RO AND RA

COAXES

D

1.000 (25.40) MAX.

Part Number

A

B

C

D

E

E1

Avg. Weight**

(oz) +_ 5% (gm.) +_ 5%

.290 (8.30)

by Shell Size

MDB1-7C2P*

MDB1-7C2S*

Max.

+_ .005 (0.13)

.782 (19.86)

Max.

.510 (12.95)

.602 (15.29)

.204 (5.18)

.185 (4.70)

.298 (7.57)

.279 (7.09)

.395 (10.03)

.375 (9.52)

.510 (12.95)

.540 (13.72)

.273 (7.80)

* Add lead type and length, see Part Number Explanation.

** Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

33

Micro-D Plastic Shell - .050" Contact Spacing

MD

Mounting Hardware Views (Sizes 9-51)

This hardware supplied unassembled.

LOCK

SCREW

RETAꢁNꢁNG

CLꢁP

MATꢁNG

FACE

#2-06 UNC-2B

.4ꢀ8 (1ꢀ.36)

MAX.

.180 (4.7ꢀ) MAX.

.182 (4.62)

MAX.

CONNECTOR

SHOWN FOR

REF. ONLY

.688 (17.48)

MAX.

PANEL REF.

.0ꢀꢀ

(12.7)

MAX.

BUSHꢁNG

.ꢀ93 (2.36)

Screw Lock Assembly

.232 (0.89) MAX.

RECOMMENDED

#2-06 UNC-2A

PANEL THꢁCKNESS

Jackpost - (P)

.ꢀ02

Screw Lock Assembly*

(1.32) TYP.

#2-06

UNC-2B

THD

.26ꢀ

(6.6ꢀ) MAX.

.178 .ꢀꢀ0

(4.02 ꢀ.13)

.ꢀ96 .ꢀꢀ0

(2.44 ꢀ.13)DꢁA.

.17ꢀ

(4.32) MAX.

90˚ Angle Mounting Bracket

B

A

90˚ Angle Mounting Bracket

*NOTE: Torque value is 4.0 in/lbs max.

A

B

Max.

.005 (0.13)

Description

Part Number

Screw Lock Assembly

Jackpost Kit

322-9500-000

320-9505-000

Mounting Bracket, 90˚ Angle-

MD*1

015-9516-000

.100

.215

for 9 thru 37 Shell Sizes

(2.54)

(5.46)

MD*1

for 51 Shell Size

.122

(3.10)

.257

(6.53)

NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit

(320-9505-000) consists of 2 assemblies, shipped unassembled.

This hardware is factory installed.

HEX HEAD -

MATING

FACE

CONNECTOR

SHOWN FOR

REF ONLY

.014 +_ .004

CONNECTOR

SHOWN FOR

REF. ONLY

.050 (1.27) ACROSS FLATS

.050 (1.27) DEEP (REF)

(0.36 +_ 0.10) ALLOWABLE

DIAMETRAL FLOAT

.020 (0.51) MAX. ALLOWABLE

AXIAL FLOAT

.150 +_ .003

.490

(3.81 +_ .076)

(12.45) MAX

.155

(3.94) MAX.

.185 (4.70)

.093

MAX

(2.36)

REF.

PART HAS A .040 (1.02)

MAX. AXIAL FLOAT

#2-56

.090 +_ .0015

MATING

FACE

.031 +_ .003

(2.29 +_ 0.038)DIA

PART HAS A .040 (1.02)

MAX AXIAL FLOAT

#2-56

(0.79 +_ 0.08)

MATING

FACE

UNC-2A

Float Mount - (F)

Jackscrew - (L) Low Profile

Jackscrew - (K) Standard

Shown here is a cutaway view of the float mount for the MD connector.

The basic shell dimensions are the same for the float mount and the

screw mounting hole configurations. View shown is for standard float

mount front panel mounting. Reverse mounting is available on request.

* NOTE: Torque values are as follows:

Low Profile Jackscrew (L)-2.5 in/lbs

Standard Jackscrew (K)-2.5 in/lbs

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

34

Micro-D Plastic Shell - .050" Contact Spacing

MD

Mounting Hardware to Military Specification (Sizes 9 - 51) PER 83513/5-Style

This hardware supplied unassembled.

PLUG (REF. WITH

#2-56 UNC-2A

THREAD TYP.

.092 (2.34) DIA.

#2-56 UNC-2A

THREAD TYP.

PLUG (REF.) WITH

.092 (2.34) DIA.

.125 (3.18) HEX

#2-56 UNC-2B Thread

MOUNTING HOLES

.190 (4.83)

.010 (0.25)

TH'K (REF.)

+_ .185 (4.70)

.361 (9.17)

MAX.

.475 (12.06)

0.25 (0.64)

.062 (1.57)

.010 (0.25)

.062 (1.57)

POTTING WELL

(REF.)

HEX. (REF.)

.010 (0.25)

TH'K (REF.)

POTTING WELL (REF.)

Jackscrew - (L) Low profile *

LOCK WASHER

RETAINING NUT

.154 (3.91) HEX.

Allen head

Optional Head Configuration

Plug and Receptacle

# 2-56 UNC-2A

Thread

Jackpost Assembly

Jackscrew - (K) High Profile

Low and High Profile

Slotted Head

Description

M83513/5-Style

Mode Code

Part Number

320-9508-025

320-9508-027

320-9508-026

320-9508-028

320-9505-033

Slotted Head Jackscrew Assy Low Profile

Slotted Head Jackscrew Assy High Profile

Allen Head Jackscrew Assy Low Profile

Allen Head Jackscrew Assy High Profile

Jackpost Assy

-05

-06

-02

-03

-07

M5

M6

M2

M3

M7

Jackpost Bushing (For Rear Panel Mounting)

HEX IS .135 (3.431/.115 (2.92) ACROSS FLATS

#2-56 UNC 2B THD

.170 (4.32)

.185 (4.70)

+ .005 (0.13)

.075 (1.91)

- .000 (0.00)

R TYP.

MATING FACE

C

A

.126 (3.20)

A

.125 (3.18)

DIA.TYP.

B

+

.500 (12.7)

.480 (12.19)

27˚/26˚TYP

#2-56 UNC

2A THD

Plug and Receptacle Dimensions

A

Panel

Thickness

A

Dim.

Jackpost Kit

Number*

B

C

+.004 (0.10)

-.000 (0.00)

+.004 (0.10)

3/32 (2.4)

.092/.087 (2.34/2.21)

.061/.056 (2.34/1.42)

.047/.042 (1.19/1.07)

.030/.025 (0.76/0.64)

320-9505-007

320-9505-006

320-9505-005

320-9505-004

+_.005 (0.13)

Shell Size

-.000 (0.00)

.219 (5.56)

.261 (6.63)

1/16 (1.6)

3/64 (1.2)

1/32 (0.8)

9

15

21

25

31

37

51

.379 ( 9.63)

.529 (13.44)

.679 (17.25)

.779 (19.79)

.929 (23.60)

1.079 (27.41)

1.029 (26.14)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

*2 Jackposts, 2 nuts, 2 washers.

NOTE: Torque value for jackpost 2.5 in/lbs

Panel Mounting Dimensions

.100 .00ꢀ

.200 .00ꢀ

(7.62 0.ꢁ13

(ꢀ.08 0.ꢁ13

.19ꢀ .00ꢀ

(ꢁ0.01 0.ꢁ13

Plug and Receptacle

Rear Mounted

Plug and Receptacle

Front Mounted

Plug Front Mounted

Receptacle Rear Mounted

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

35

Micro-D Plastic Shell - .050" Contact Spacing

MD

Panel Cutouts

D

TYP.

C

B

.015 (0.38)R.

MAX.(TYP)

FULL R.

(TYP.)

A

Figure 1

Front Mounting

C

A

+ .005 (0.13) R TYP

- .000 (0.00)

.075 (1.91)

D

B

FULL R. (TYP.)

26˚/27˚TYP

Figure 2

Rear Mounting

C

.450 .002

(11.43 0.05)

.030 (0.76) TYP.

D

+

+ +

FULL R.

(TYP.)

PANEL REF.

Figure 3

Edgeboard Mounting

A

B

C

D

Cutout

Figure

+ .004 (0.10)

- .000 (0.00)

+ .004 (0.10)

- .000 (0.00)

+ .005 (0.13)

- .000 (0.00)

+ .005 (0.13)

- .000 (0.00)

Size

1

2

3

1

2

3

1

2

3

1

2

3

1

2

3

1

2

3

1

2

3

.409 (10.39)

.379 ( 9.63)

-

.172 (4.37)

.219 (5.56)

-

.570 (14.48)

.720 (18.29)

.870 (22.10)

.970 (24.64)

1.120 (28.45)

1.270 (32.26)

1.220 (30.99)

.089 (2.26)

9

.559 (14.20)

.529 (13.44)

-

.172 (4.37)

.219 (5.56)

-

15

21

25

31

37

51

.709 (18.00)

.679 (17.25)

-

.172 (4.37)

.219 (5.56)

-

.809 (20.55)

.779 (19.79)

-

.172 (4.37)

.219 (5.56)

-

.959 (24.36)

.929 (23.60)

-

.172 (4.37)

.219 (5.56)

-

1.109 (28.17)

1.079 (27.41)

-

.172 (4.37)

.219 (5.56)

-

1.059 (26.90)

1.029 (26.14)

-

.215 (5.46)

.261 (6.63)

-

NOTES:

1.

2.

3.

Front mounting (figure 1) and rear mounting (figure 2) accommodates #2-56 screws.

Front mounting is preferred. However, when rear mounting is necessary. use detail on previous page.

Edgeboard mounting bracket (figure3) uses #2-56 screws. Dimension .450 .002 (11.43 0.05) locates the

MD receptacle flush with the end of the board.

www.ittcannon.com

36

Micro-D Plastic Shell - .050" Contact Spacing

MD/MDV

How to Order

MD

1-

9

P

H

001

P

R

PCB ordering information - page 30

RoHS COMPLIANCE

SERIES-INSULATOR STYLE-MATERIAL

CONTACT SPACING

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODE

LOCKING HARDWARE

SERIES-INSULATOR STYLE-MATERIAL

MD - Clip mounting -Diallyl phthalate

MDV - Clip mounting-Polyester

TERMINATION CODE**

(H) 001 - 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon, Yellow.

(H) 003 - 18", 7/34 strand, #26 AWG,

CONTACT ARRANGEMENT

9-15-21-25-31*-37-51. See page 7

CONTACT TYPE

P - Pin

S - Socket

CONTACT SPACING

1 - .050 (1.27) centers

MIL-W-16878/4, Type E Teflon, color

coded to MIL-STD-681 System I.

TERMINATION TYPE

(L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper.

(L) 2 - 1" uninsulated solid #25 AWG gold plated copper.

No designator - No hardware - standard mounting

H - Insulated solid or stranded wire

L - Uninsulated solid wire

S - Solder pot to accept #26 AWG max.

harness wire.

.091 (2.31) hole diameter

* Not available in clip mounting.

** See page 79 and 81for additional codes.

With Clip Mounting Slots

Glass-filled Diallyl Phthalate

Plastic Insulator

Glass-filled Polyester

Plastic Insulator

Plug

MD

MDV

B

.ꢀ30

(3.30)

MAX.

.022 (0.56)

MAX.

.065 (ꢀ.65)

MAX.

.204 (5.ꢀ8)

MAX.

.375 (9.52)

MAX.

E

D

.093 .005

(2.36 0.ꢀ3)

.ꢀ70

(4.32)

C

A

Solder Pot

Receptacle

B

.ꢀ70

(4.32)

MAX.

.065 (ꢀ.65)

MAX.

.022 (0.56)

MAX.

.ꢀ85 (4.69)

MAX.

.356 (9.04)

MAX.

E

D

.093 .005

(2.36 0.ꢀ3)

.2ꢀ0

(5.33)

C

A

Solder Pot

A

B

C

D

E

Avg. Weight***

Part Number by Shell Size

Max.

5ꢀ ꢁ(z.ꢂ) 5ꢀ ꢁgm.ꢂ

.026 (0.73)

.038 (1.10)

.035 (1.00)

.053 (1.50)

.050 (1.40)

.063 (1.80)

.056 (1.60)

.086 (2.45)

.076 (2.15)

.109 (3.10)

.093 (2.65)

MD1-9P**

MD1-9S**

MDV1-9-P**

MDV1-9S**

MDV1-15P**

MDV1-15S**

MDV1-21P**

MDV1-21S**

MDV1-25P**

MDV1-25S**

MDV1-37P**

MDV1-37S**

MDV1-51P**

MDV1-51S**

.512 (13.00)

.662 (16.81)

.812 (20.62)

.912 (23.16)

1.212 (30.78)

1.162 (29.51)

.292 (7.42)

.376 (9.55)

.405 (10.29)

.555 (14.10)

.705 (17.91)

.805 (20.45)

1.105 (28.07)

1.055 (26.80)

.170 (4.32)

.213 (5.41)

.215 (5.46)

.258 (6.55)

MD1-15P**

MD1-15S**

MD1-21P**

MD1-21S**

MD1-25P**

MD1-25S**

MD1-37P**

MD1-37S**

MD1-51P**

MD1-51S**

.442 (11.23)

.526 (13.36)

.592 (15.04)

.676 (17.17)

.692 (17.58)

.776 (19.71)

.992 (25.20)

1.076 (27.33)

.942 (23.93)

1.026 (26.06)

*** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.

** Add lead type and length, see Part Number Explanation.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

37

Micro-D Plastic Shell - .050" Contact Spacing

MD**

Panel Mounting Hardware

Clip Mounting

Illustrated is the recommended method of front mounting

with metal panel mounting keys. Panel mounting keys are

available with or without coupling retention clips.

For front mounting, place the rear of the connector thru

the panel cutout. With the mounting flange against the

panel, fully insert the panel mounting keys thru the slots

Coupling Retention Clip

Mounting Screw Brackets

(see Figures 1 and 3)

in the flange and thru the panel cutout. Retaining the

(see Figure 2)

keys in this position, bend them outward against the rear

of the panel. When mating a front mounted connector

with an unmounted connector, a coupling retention clip

assembly may be used to securely lock the two together.

Mounting screw brackets are available and may be used

instead of the panel mounting keys.

Description

Part Number

201-9100-000

294-9100-000

015-9100-000

015-5009-000

Panel Mounting Key

Mounting Key and Coupling Clip Assembly

Mounting Screw Bracket

Edgeboard Mounted

(see Figure 4)

Panel

Mounting Key

* Edgeboard Mounting Bracket

** Edgeboard Mounting Bracket and

Coupling Clip Assembly

MD51428-1

*

Must be ordered separately; specify left and right hand for complete

assembly.

**

Must be ordered separately; assembly contains set of left and right

hand types.

Dimensions (Clip Mounting Only)

.ꢄꢄ0 .00ꢀ

ꢁꢂ.ꢄꢂ 0.ꢃꢄ1

.200 .00ꢀ ꢁꢀ.0ꢂ 0.ꢃꢄ1

.26ꢀ .00ꢀ ꢁ6.ꢅꢄ 0.ꢃ

Plug and Receptacle

Rear Mounted

Plug and Receptacle

Front Mounted

Plug Front Mounted

Receptacle Rear Mounted

Panel Cutouts

C

A

B

C

D

A

Shell Cutout + .004 (0.10) + .004 (0.10) + .004 (0.10) + .005 (0.13)

Size Figure - .000 (0.00) - .000 (0.00) - .000 (0.00) - .000 (0.00)

B

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

.408 (10.36)

.378 ( 9.60)

.400 (10.16)

.588 (14.94)

.528 (13.28)

.550 (13.97)

.738 (18.75)

.678 (17.27)

.700 (17.78)

.838 (21.29)

.778 (19.76)

.800 (20.32)

.172 (4.37) .650 (16.51) .089 (2.26)

.172 (4.37)

.217 (5.51) .650 (16.51) .089 (2.26)

.091 (2.31)

.172 (4.37) .795 (20.19) .089 (2.26)

.172 (4.37)

.217 (5.51) .795 (20.19) .089 (2.26)

.091 (2.31)

.172 (4.37) .945 (24.00) .089 (2.26)

.172 (4.37)

.217 (5.51) .945 (24.00) .089 (2.26)

.091 (2.31)

.172 (4.37) 1.045 (26.54) .089 (2.26)

.172 (4.37)

.217 (5.51) 1.045 (26.54) .089 (2.26)

.091 (2.31)

A

.015 (0.38)R.

MAX. (TYP.)

.015 (0.38)R.

MAX. (TYP.)

FULL R. (TYP.)

-

9

Figure 1

Figure 2

Front Mounting

-

.005 (0.13) MAX.

R. (TYP.)

.018 + .002 - .000

A

C

.075 + .005 - .000

(1.91 + 0.13 _ 0.00)

(0.46 + 0.05 - 0.00)

-

A

15

21

25

37

51

D

B

-

B

.182 + .004 - .000

(4.62 + 0.10 - 0.00)

FULL R. (TYP.)

26˚/27˚ TYP.

-

PANEL REF.

Figure 3

Rear Mounting

Figure 4

Edgeboard Mounting

-

A panel thickness of 1/8" (3.17mm) maximum is recommended for ease of tab bending

when a panel mounting key & clip assembly or edgeboard mounting brackets are used.

Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for

dimensions.

1.

2.

-

1.138 (28.91) .172 (4.37) 1.345 (34.16) .089 (2.26)

1.138 (28.91) .172 (4.37)

1.078 (27.38) .217 (5.51) 1.345 (34.16) .089 (2.26)

1.100 (27.94) .091 (2.31)

1.088 (27.64) .215 (5.46) 1.295 (32.89) .089 (2.26)

1.088 (27.64) .215 (5.46)

1.028 (26.11) .260 (6.60) 1.295 (32.89) .089 (2.26)

1.050 (26.67) .091 (2.31)

3. Figure 4 is for edge board mounting bracket or edgeboard clip assembly. The .184 +_ .002

(2.67 +_ 0.05) dimension locates the MD socket insulator flush with the end of the board.

4. Screw brackets (015-9100-000) will accommodate #2-56 screws.

-

5. Front mounting (Figure 1) and rear mounting (Figure 3) accommodate #2-56 screws.

-

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

38

Micro Center Jackscrew

MJS

The MJS jackscrew series provides a reliable interconnect for board-to-board,

board-to-cable and in-line cable-to-cable applications. Layouts accommodating

up to 76 MICROPIN/MICROSOCKET^TMcontacts are available, with the same

wide range of options as are offered with the other MICRO Line products offered

in this catalog.

How to Order

MJS

*

-

26

P

H

001

R

RoHS COMPLIANCE

SERIES

INSULATOR MATERIAL

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODES

SERIES

MJS - Micro Center Jackscrew

CONTACT TYPE

P - Pin

TERMINATION CODE*

(H) 001

- 18" , 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

yellow.

S - Socket

INSULATOR MATERIAL

B - Diallyl phthalate

V - Polyester

TERMINATION TYPE

(H) 003

- 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

color coded to MIL-STD-681

System I.

H - Insulated wire harness.

I - Integral tail (MJSV-28S only).

L - Solid - uninsulated wire.

S - Solder pot to accept #26 AWG

harness wire.

U - Polyetherimide

R - Polyphenylene sulfide

(L) 1

(L) 2

- 1/2" uninsulated solid #25

AWG gold plated copper.

- 1" uninsulated solid #25 AWG

gold plated copper.

CONTACT ARRANGEMENTS

Unshrounded Receptacle: 10, 26, 51, 66

Shrouded Receptacle; 10, 26, 34, 38, 42, 76

Low Profile Plug and Receptacle

(shrouded): 28

T - Thru bundle pigtail (MJSV-28P only).

* See Termination Codes shown below.

Standard Wire Termination Codes

The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum.

Harness Type (H)

#26 AWG per MIL-W-16878/4 Type E Teflon, 7/34 stranded.

Solid Uninsulated Type (L)

#25 AWG gold plated solid copper.

Length

3 (76.2)

All Yellow

H 020

H 019

H 026

H 029

H 028

H 001

H 038

Color Coded

H 027

Length

24 (609.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.8)

120 (3048.0)

All Yellow

H 009

Color Coded

H 004

Termination

Code

Termination

Length

Code

L14

L2

L61

L56

L57

L39

L58

L1

.125 (3.18)

.150 (3.81)

.190 (4.83)

.250 (6.35)

.375 (9.53)

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

6 (152.4)

8 (203.2)

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

H 016

H 010

H 005

H 034

H 011

H 006

L7

H 025

H 013

H 048

L6

H 002

H 017

H 046

L16 2.500 (63.50)

L10 3.000 (76.20)

H 003

H 042

H 041

H 023

Contact Arrangements

Face view of pin-use reverse order for socket

1

7

11

6

10

16

1

11

19

10

18

28

12

14

26

1

13

15

4

6

1

5

7

10

16 Contacts**

28 Contacts**

10 Contacts

26 Contacts

21

44

66

1

23

45

1

13

23

12

22

34

17

34

51

1

18

35

51 Contacts

66 Contacts

MJSB/MJSU (unshrouded)

34 Contacts

MJSV (shrouded)

*Low profile configuration

**MJSV & MJSR

Identification numbers are for reference only and do not appear on connectors.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

39

Micro Center Jackscrew

MJS

Unshrouded Receptacle (10-26-51-66)

MJSB/MJSU

.17ꢀ .ꢀ1ꢀ (ꢂ.32 ꢀ.20ꢁ

POLARIZING PIN (OPTIONAL WITH LOSS OF CONTACTꢁ

.126 .ꢀꢀ0

(3.2ꢀ ꢀ.13ꢁ

B

.050 (1.27) TYP.

1-6ꢂ UNC-2A

THREAD

1-6ꢂ UNC-2B

THREAD

C

A

.145 (3.68)

DIA.

MAX.

.055 (1.40) TYP.

.17ꢀ (ꢂ.32ꢁ

MAX.

.332 (8.ꢂ3ꢁ

MAX.

.11ꢀ MAX.

(2.79ꢁ

Rear View

Receptacle

Plug

UNSHROUDED

STANDARD MATERIALS AND FINISHES

A

Max.

.378 (9.60)

B

Max.

C

Bsc.

.290 (7.37)

Part Number

Micropin

Copper alloy, 50 miro-inch gold

Copper alloy, 50 micro-inch gold

MJSB or MJSU-10P

MJSB or MJSU-10S

MJSB or MJSU-26P

MJSB or MJSU-26S

MJSB or MJSU-51P

MJSB or MJSU-51S

MJSB or MJSU-66P

MJSB or MJSU-66S

.190 (4.83)

.260 (6.60)

Microsocket

Insulator

Diallyl phthalate, green color

or polyetherimide, natural color

.778 (19.76)

1.028 (26.11)

1.280 (32.51)

.690 (17.53)

.940 (23.88)

1.190 (30.23)

Stainless steel, passivated & lubricated

Stainless steel, passivated

Jackscrew

Retainer, Jackscrew

Insert, Threaded

Post, Polarizing

Stainless steel, passivated

Shrouded Receptacle (16-28*-34)

MJSV/MJSR

A

1-64 UNC-2B

THREAD

.205 (5.21) MAX.

.080 (2.03)

.065 (1.65)

.285 (7.24)

MAX.

B

D

C

Face View

Plug

.090 .0ꢀ0

(2.29 0.2ꢁ5

A

1-64 UNC-2A

THREAD

B

.110 (2.79) MAX.

.285 (7.24) MAX.

C

Face View

Receptacle

.145

(3.68)

DIA. MAX.

SHROUDED

A

B

C

D

Part Number

Max.

Ref.

.006 (0.15)

STANDARD MATERIALS AND FINISHES

MJSV or MJSR-16P

MJSV or MJSR-16S

.700 (17.78)

.345 (8.76)

.320 (8.13)

.232 (5.89)

.246 (6.25)

.330 (8.38)

.305 (7.75)

.545 (13.84)

.865 (21.97)

1.025 (26.04)

.175 (4.45)

Micropin

Copper alloy, 50 miro-inch gold

Copper alloy, 50 micro-inch gold

-

Microsocket

Insulator

MJSV-28P* or MJSR-28P* 1.020 (25.91)

MJSV-28S* or MJSR-28S* 1.020 (25.91)

MJSV-34P or MJSR-34P 1.180 (29.97)

MJSV-34S or MJSR-34S 1.180 (29.97)

.062 (1.57)

Polyester, black color

Polyphenylene sulfide, black color

-

Stainless steel, passivated

Jackscrew

.160 (4.06)

-

Retainer, Jackscrew

Insert, Threaded

Post, Polarizing

*Low profile configuration, for "L" (uninsulated solid wire) termination add .090 (2.29) to the "B" dimension.

For "H" (insulated wire) termination add .200 (5.08) to the "B" dimension. For special configurations

with backpotted standoffs consult factory.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

40

Micro Center Jackscrew

MJS

Shrouded Receptacle (42)

MJSR-42P

A

1.322

(33.58)

REF.

.125

(3.18)

TYP.

.100

(2.54)

TYP.

CAV. #1

.297

(7.54) (10.67)

REF. MAX.

.420

+

.075

(1.91)

TYP.

CAV. #31

CAV #42

C

.035 (0.89)

.015 (0.38)

TYP.

#1 (.073) - 64 UNC-2B

THREADED INSERT

B

D

MJSR-42S

A

1.328

(33.73)

REF.

.125

(3.18)

TYP.

.100

(2.54)

TYP.

.075 (1.91)

TYP.

CAV

# 1

+

.303

(7.70)

REF.

.420

(10.67)

MAX.

+

CAV. 42

C

1/16 SOCKET HEAD JACKSCREW

#1 (.073 - 64 UNC - 2A THREAD

.131 (3.33)

.121 (3.07)

TYP

B

.145 (3.68)

DIA. MAX.

.108

(2.74)

MAX.

A

Max.

B

Max.

C

Ref.

D

Part Number

.ꢀꢀ0 ꢁꢀ.ꢂ15

MJSR-42P

MJSR-42S

1.445 (36.70)

.345 (8.76)

.357 (9.07)

1.250 (31.75)

.142 (3.61)

-

STANDARD MATERIALS AND FINISHES

Micropin

Copper alloy, 50 miro-inch gold

Microsocket

Insulator

Copper alloy, 50 micro-inch gold

Polyphenylene sulfide, black color

Stainless steel, passivated

Jackscrew

Retainer, Jackscrew Stainless steel, passivated

Insert, Threaded Stainless steel, passivated

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

41

Micro Center Jackscrew

MJS

Shrouded Receptacle (76)

MJSR-76P

A

1.472

(37.39)

REF.

CAV. #13

CAV.

#1

.100 (2.54) TYP.

.570

(14.48)

MAX.

.447

(11.35)

REF.

+

.075

(1.91)

TYP.

CAV. #76

CAV. #62

C

.035 (0.89)

.015 (0.38)

TYP.

#2 (0.86) - 64 UNC-2B

THREADED INSERT

B

D

MJSR-76S

A

1.478 (37.54) TYP.

CAV. #13

CAV. #1

.100 (2.54)

TYP.

+

.075

(1.91)

TYP.

+

.570

(14.48)

MAX.

.453

(11.51)

TYP.

CAV. #62

CAV. #76

C

1/16 SOCKET HEAD JACKSCREW

#2 (.086 - 64 UNC - 2A THREAD

.131 (3.33)

.121 (3.07)

TYP

B

.160

(4.06)

MAX.

.150 (3.81)

MAX.

A

Max.

B

Max.

C

Ref.

D

Part Number

.ꢀꢀ6 ꢁꢀ.ꢂ15

MJSR-76P

MJSR-76S

1.595 (40.51)

.345 (8.76)

.357 (9.07)

1.400 (35.56)

.142 (3.61)

-

STANDARD MATERIALS AND FINISHES

Micropin

Copper alloy, 50 miro-inch gold

Copper alloy, 50 micro-inch gold

Polyphenylene sulfide, black color

Stainless steel, passivated

Microsocket

Insulator

Jackscrew

Retainer, Jackscrew Stainless steel, passivated

Insert, Threaded Stainless steel, passivated

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

42

Micro Center Jackscrew

MJS

Plug (Molded-In Insert - Special)

MJSV**P

A

MAX.

INSERT

#1-64 UNC-2B

CAVITY # 1

ENGAGING FACE

MICRO-PIN

CONTACT

INSULATOR

.100 (2.54)

.300 (7.62)

MAX.

.162 (4.11)

REF.

LEAD

LENGTH

.061 (1.55)

MAX.

.109 (2.77)

MAX. DIA.

MJSV-26P**

(Shown)

A

Ref.

Part Number

MJSV-26P**

MJSV-38P**

.868 (22.05)

1.168 (29.67)

Receptacle (Special)

MJSV**S*

A

MAX.

MICRO-SOCKET

.100 (2.54)

REF.

#1-64 UNC-2A

CAVITY # 1

.190 (4.83)

REF.

.320 (8.13)

MAX.

.253 (6.43)

MAX.

.167 (4.24)

REF.

.155 (3.94)

MAX.

B

LEAD

LENGTH

JACKSCREW

MJSV-26S**

(Shown)

A

Max.

B

Ref.

Part Number

MJSV-26S**

MJSV-38S**

.943 (23.95)

1.243 (31.57)

.874 (22.20)

1.174 (29.82)

Contact Arrangements

Face view of pin - use reverse order for socket

.100 (2.54)

REF.

.050 (1.27)

.075 (1.91)

14

1

20

38

1

+

21

15

26

.050 (1.27)

TYP.

.050 (1.27)

TYP.

26 Contacts

38 Contacts

Identification numbers are for reference and do not appear on connectors.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

43

Microminiature Circular - .050" Contact Spacing

MICRO-K

MICRO-K microminiature circular connectors

are rugged yet lightweight - and are designed

to be comparable to MIL-DTL-83513.

Applications include biomedical,

instrumentation and miniature black boxes.

Standard MIK connectors are available in two

shell sizes accommodating two contact

arrangements pre-wired to your specific

requirements.

radios, military gun sights, airborne landing

systems and medical equipment. Maximum

temperature range - 55˚C to +125˚C.

MIKM: Similar to our MIK, except has a steel

shell and receptacle for improved ruggedness

and RFI resistance. It accommodates up to 85

MIK: Accommodate up to 55 contacts on .050

(1.27) centers (equivalent to 420 contacts per

square inch). Five keyway polarization prevents twist pin contacts. Maximum temperature

cross plugging. The threaded coupling nuts

provide strong, reliable coupling. MIK recepta-

cles can be either front or back panel mounted;

in back mounting applications, panel thickness

of up to 3/32" can be used on the larger sizes.

Maximum temperature range - 55˚C to + 125˚C.

range - 55˚C to + 125˚ C.

MIKQ: A quick disconnect metal shell and

receptacle version that can be instantaneously

disconnected yet provides a solid lock when

engaged. Applications include commercial TV

cameras, portable

Specifications

STANDARD MATERIAL AND FINISHES

ELECTRO/MECHANICAL FEATURES

MIK

MIKM

MIKQ

MIK

7,55

MIKM

7,55, 85

MIKQ

7,19, 37

Shell

Coupling Nut

Thermoplastic

Stainless Steel

Brass

No. of Contacts

Wire Size

#24 AWG

thru #32 AWG

Crimp

#24 AWG

thru #32 AWG

Crimp

#24 AWG

thru #32 AWG

Crimp

Stainless Steel

Passivated

Stainless Steel

Passivated

Brass, Electroless

Nickel Plated*

Insulator

Contacts

Glass-reinforced

Thermoplastic

Glass-reinforced

Thermoplastic

Glass-reinforced

Thermoplastic

Contact Termination

Contact Rating

Couping

3 Amps

50 Microinch

Gold Plated

Copper Alloy

50 Microinch

Gold Plated

Copper Alloy

50 Microinch

Gold Plated

Copper Alloy

Threaded

Keyways

.050 (1.27)

Centers

Threaded

Keyways

.050 (1.27)

Centers

Push/Pull

Keyways

.050 (1.27)

Polarization

Contact Spacing

*For plug only

Centers

7-Jam Nut

6-Straight Plug

9-Rear Panel

Mtg. Receptacle

Electrodeposited for receptacle.

Shell Styles

0-Wall Mtg.

6-Straight Plug

0-Wall Mtg.

6-Straight Plug

How to Order

MIK

M

6- 55

P

*

* * * * *

R

RoHS COMPLIANCE

SERIES

CONNECTOR TYPE

SHELL STYLE

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

TERMINATION LENGTH CODE

HARDWARE

SERIES

CONTACT ARRANGEMENTS

TERMINATION LENGTH CODE (STANDARDS)

MIK: Microminiature Circular

7, 19, 37, 55, 85

(H) 001 -

18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

yellow.

18",7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

color coded to MIL-STD-681

System I.

1/2" uninsulated solid #25

AWG gold plated copper.

1" uninsulated solid #25 AWG

gold plated copper.

CONNECTOR TYPES

CONTACT TYPE

P - Pin

S - Socket

No Letter - Screw couping, plastic shell

M - Screw coupling, metal shell

Q - Push/Pull, metal shell

(H) 003 -

TERMINATION TYPES

H - Insulated round hook-up wire

L - Uninsulated round solid wire

SHELL STYLES

(L) 1 -

(L) 2 -

0 - Wall mounting receptacle (MIK and

MIKM only)

6 - Straight plug (MIK, MIKM and MIKQ)

7 - Jam nut mount (MIKQ only)

9 - Rear panel mounted receptacle (MIKQ)

HARDWARE

G - Cable nut and grip (MIKQ plug only)

N - Nut only (MIKQ plug only)

NOTE: Contact types cannot be interchanged

between shell styles.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

44

Microminiature Circular - .050" Contact Spacing

MIK

Standard Wire Termination Codes

The following termination codes are listed for your

information. For additional codes please refer to

Appendix on page 79 and 81. All wire lengths are

minimum.

HARNESS TYPES (H)

#26 AWG per MIL-W-16878 Type E, Teflon Stranded

Length

3 (76.2)

-All Yellow

020

Color Coded

027

6 (152.4)

019

016

8 (203.2)

026

034

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

24 (609.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.8)

120 (3048.0)

029

025

028

002

001

003

038

023

009

004

010

005

011

006

013

048

017

046

042

041

Contact Arrangements

Face View, Pin Side-(Male Twist Pin Contacts)

1

4

5

11

19

28

1

3

12

4

9

1

4

20

10

16

5

9

29

39

48

MASTER KEY (TYP)

17

25

32

24

31

39

38

1

3

10

16

23

15

22

28

47

57

7

2

4

7

1

6

8

12

66

58

3

74

81

40

46

67

13

16

29

33

47

52

75

4

5

34

37

17

19

82

85

53

55

MIK/MIKM/MIKQ

7 Contacts

MIKQ

19 Contacts

MIKQ

37 Contacts

MIK/MIKM

55 Contacts

MIKM

85 Contacts

Cavity identification numbers are for reference only, they do not appear on connectors.

Shell Dimensions

MIK (Rear Panel Mount Thickness - see Tabulation "T")

Weight given is 1/2" uninsulated, solid #25 AWG gold plated copper pigtails

.335 (8.51)

K

Max.

A THD

A THD.

L

R

A THD.

+

D

S

D

DIA.

S

R

DIA.

L

H (TYP.)

K

F

L

F

L

H (TYP.)

Plug

Receptacle

Plug

Receptacle

Shell Size 7 only

Shell Size 55 only

Plug

Part Number

by Shell Size

A

D

Max.

L

Max.

Avg. Weight

oz. (gm.) 5ꢀ

Thread

MIK6-7P

5/16-24UNF-2B

9/16-24UNF-2A

.375 (9.52)

.315 (8.00)

.054 (1.54)

.202 (5.72)

MIK6-55P

.755 (19.18)

.460 (11.68)

Receptacle

Part Number

by Shell Size

A

D

F

H

K

L

R

S

T

Avg. Weight

Thread

.010 (0.25)

Max.

.003 (0.08)

.078 (1.98)

.089 (2.26)

.010 (0.25)

Max.

.005 (0.13)

Max.

oz. (gm.) 5ꢀ

MIK0-7S

5/16-24UNF-2B .325 (8.26)

.315 (8.00)

.062 (1.57)

.355 (9.02)

.460 (11.68) .630 (16.00) .032 (0.81) .022 (.635)

.580 (14.73) .760 (19.30) .062 (1.57) .134 (3.81)

MIK0-55S

9/16-24UNF-2A .625 (15.88) .440 (11.18)

.100 (2.54) .495 (12.57)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

45

Microminiature Circular - .050" Contact Spacing

MIKM/MIKQ

Shell Dimensions (Continued)

MIKM (Rear Panel Mount Thickness .335 (8.51) max. - see Tabulation "T")

.3 3 5 (8 .5 1 )

M a x .

K

A T H D

L

A T H .D

R

A T H D

D

D IA .

D

D IA .

S

R

D

D IA .

D

D IA .

L

K

H

(T Y.)P

F

L

H

(T Y.)P

Plug

Receptacle

Plug

Receptacle

Shell Size 7 only

Shell Size 55 & 85

Plug

Part Number

by Shell Size

A

D

Max.

L

Max.

Avg. Weight

oz. (gm.)+_5%

Thread

MIKM6-7P

MIKM6-55P

MIKM6-85P

5/16-24UNF-2A

5/8-24UNEF-2B

.375 (9.52)

.775 (19.18)

.860 (21.84)

.315 (8.00)

.440 (11.18)

.460 (11.68)

.054 (1.54)

.333 (9.44)

.419 (11.88)

11/16-24UNEF-2B

Receptacle

Part Number

by Shell Size

A

F

Max.

H

L

Max.

R

S

Max.

T

Max.

Avg. Weight

oz. (gm.)+_5%

Thread

D

+_ .003 (0.08)

K

+_ .005 (0.13)

MIKM0-7S

5/16-24UNF-2A .325 (8.26)

.320 (8.13)

.078 (1.98)

.091 (2.31)

.062 (1.57) .400 (10.16) .460 (11.68)

.062 (1.57) .490 (12.45) .580 (14.73)

.062 (1.57) .490 (12.45) .674 (17.12)

.630 (16.00) .032 (0.81) .051 (1.45)

.760 (19.30) .125 (3.18) .269 (7.62)

.845 (21.46) .125 (3.18) .346 (9.80)

MIKM0-55S 5/8-24UNEF-2A .625 (15.88) .440 (11.18)

MIKM0-85S 11/16-24UNEF-2A .745 (18.92) .440 (11.18)

MIKQ (Front Panel Mounting Type Shown-.093 (2.36) Thickness)

.950 (24.13) MAX.

.043 .005

MASTER KEY

A

DIA.

(1.09 0.13)

D THD.

.760

(19.30) MAX.

C DIM.

ACROSS FLAT

*

NUT

B

DIA.

A

B

C

DIA.

1.20

.093 (2.36) REF.

.495 (12.67) MAX.

(30.48) MAX.

FOR SIZE 37 ONLY

Plug

Receptacle

Plug

Part Number

by Shell Size

A

MAX.

B

MAX.

C

Ref.

Avg. Weight

oz. (gm.)±±5

MIKQ6-7S

MIKQ6-19S

MIKQ6-37S

.385 (9.78)

.515 (13.08)

.760 (19.30)

.305 (7.75)

.405 (10.29)

.635 (16.13)

.180 (4.57)

.260 (6.60)

.350 (8.89)

.214 (6.08)

.376 (10.70)

.714 (20.23)

*Std. Conn. not supplied with Cable Nut & Grip, See Mod Codes. Lanyard Relase Is Available. Consult factory.

Receptacle

Part Number

by Shell Size

A

MAX.

B

MAX.

C

MAX.

D

Avg. Weight

oz. (gm.)±±5

Thread

MIKQ6-7S

MIKQ7-19P

MIKQ7-37P

.510 (12.95)

.575 (14.60)

.855 (21.71)

.245 (6.22)

.345 (8.76)

.520 (13.20)

.359 (9.12)

.470 (11.94)

.740 (18.80)

3/8-32UNEF-2A .128 (3.63)

1/2-28UNEF-2A .214 (6.08)

3/4-20UNEF-2A .300 (8.52)

MIKQ Front Panel Mounting

Front Panel Mounting-MIKQ7

A

B

DIA.

Shell Size

.005 (0.13)

A

MIKQ7-7P

MIKQ7-19P

MIKQ7-37P

.364 (9.24)

.390 (9.91)

.475 (12.06) .515 (13.08)

.740 (18.78) .755 (19.17)

B

DIA.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

46

Microminiature Circular - .050" Contact Spacing

MIKQ

Shell Dimensions (Continued)

MIKQ9-7P (Back Panel Mounting)

.043 .005

(ꢀ.09 0.ꢀ3)

KEY

.245 (6.22)

DIA. MAX.

.250 .0ꢀ0

(6.35 0.25)

WIRE

EXTENSION

LENGTH

.4ꢀ5 .0ꢀ0

(ꢀ0.54 0.25)

INSULATOR

SHELL

.485 (ꢀ2.32)

MAX.

.570 (ꢀ4.48)

DIA. MAX.

ꢀ/2

HEX-NUT

7/ꢀ6-28 UNEF-2A

Receptacle

MIKQ9-19P (Back Panel Mounting)

.043 .005 (ꢀ.09 0.ꢀ3)

INSULATOR

KEY

.250 .0ꢀ0 (6.35 0.25)

.525 .0ꢀ0

(ꢀ3.33 0.25)

.345 (8.76)

DIA. MAX.

+.0ꢀ5

5/8

HEX-NUT

.425

(ꢀ0.79

.625 .0ꢀ0

(ꢀ5.87 0.25) DIA.

9/ꢀ6-24 UNEF-2A THREAD

.485 (ꢀ2.32) MAX.

-.000

+0.30

-0.00

)

Receptacle

MIKQ9-37P (Back Panel Mounting)

.250 .0ꢀ0

(6.35 0.25)

.043 .005

(ꢀ.09 0.ꢀ3)

.505 MAX.

(ꢀ2.83 MAX.)

SHELL

.665 MAX.

(ꢀ6.89) MAX.

.730 .0ꢀ0

(ꢀ8.54 0.25)

INSULATOR

.490 MAX.

3/4-20 UNEF-2A THREAD

ꢀ3/ꢀ6 HEX NUT

.885 MAX.

(22.48 MAX.)

(ꢀ2.45 MAX.)

Receptacle

MIKQ Rear Panel Mounting

Rear Panel Mounting-MIKQ9

A

B

Dia.

A

.005 (0.13)

.425 (10.76)

.535 (13.58)

.740 (18.78)

Shell Size

MIKQ9-7P

MIKQ9-19P

MIKQ9-37P

.440 (11.18)

.564 (14.33)

.755 (19.17)

B

DIA.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

47

Microstrips .050" Contact Spacing

MT

The Cannon Microstrips provide an extremely

dense and reliable interconnection solution in

a minimum profile package, giving great appli-

cation flexibility. Available with latches or

guide pins, Microstrips are frequently found in

board-to-wire applications where high reliabili-

ty is a primary concern.

Three termination styles are available: solder

cup, pigtail, harness, or printed circuit leads.

The MicroPin Contact System assures maxi-

mum performance in a minimum package.

Product Features

•

High Performance MicroPin Contact System

High-density .050” contact spacing

Pre-wired for ease of installation

Fully potted wire terminations

Guide pins for alignment and polarizing

Quick-disconnect latches

3 Amp current rating

Precision crimp terminations

Solder cup, pigtail or printed circuit terminations

Surface mount leads

MicroPin Contact System

WIRE

SLEEVE

The Cannon MicroPin Contact System offers

uncompromised performance in downsized

interconnects. The beryllium copper pin contact is

fully recessed in the insulator, assuring positive

contact alignment and robust performance. The

socket contact is precision machined from high

strength copper alloy and features a smooth lead-in

chamfer.

WIRE CRIMP

The MicroPin features seven points of electrical

contact. This contact system assures high normal

force, excellent wipe and superior shock and

vibration performance.

Specifications

Current Rating 3 Amps max

Dielectric Withstanding Voltage 900 VAC @ sea level; 300 VAC @ 70,000 feet altitude

Insulation Resistance 5000 megohms min.

Contact Resistance 8 milliohms max.

Operating Temperature MTV polyester -56°C to +125°C; MTB diallyl phthalate -55°C to +150°C

Durability 500 cycles min.

Shock/Vibration 50 G’s/20 G’s

Connector Mating Force (8 oz.) x (# of contacts)

Latch Retention 5 lbs. min.

Wire Size #26 AWG insulated wire, #25 AWG uninsulated solid wire. MT strips will also accommodate #24 AWG through #32 AWG.

For other wiring options contact the factory for ordering information.

General Performance requirements are designed to be comparable to MIL-DTL-83513

Materials and Finishes

Insulator MTV: Glass-filled polyester per MIL-M-24519; MTB: Glass-filled diallyl phthalate per MIL-M-14

Contact Copper Alloy per 83513-Style

Contact Finish 50 Microinches Min. Gold Plated per MIL-G-45204

Insulated Wire #26 AWG. 19/38 Stranded, silver-plated copper, TFE Teflon insulation per MIL-W-16878/4

Uninsulated Solid Wire #25 AWG gold-plated copper per QQ-W-343

Potting Material/Contact Encapsulant Epoxy

Latch 300 series stainless steel, passivated

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

48

Microstrips .050" Contact Spacing

MT

How to Order

R

MTV1 – 16

P

H001 01

RoHS Compliance

Series

MTB1 – High Temperature Diallyl Phthalate 150°C (Recommended for severe environments)

MTV1 – Polyester 125°C (Recommended for general purpose use)

Number of Cavities

2 through 40.

This number is the total number of cavities including guide pins and latches. 40 positions is the

maximum recommended size for standard strips, but sizes up to 120 positions are available on request.

Contact Type

P- Pin

S – Socket

Pin Strip

Socket Strip

Termination Style

Solder Cup contacts for customer termination

S

Pre-wired Pigtails

H067 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, yellow

HY01 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, 10 color repeating

Straight Terminals .018” diameter, gold-plated

L1 – 5” extension

L2 – 1” extension

L57 – .190” extension

L61 – .125” extension

Right Angle Terminals staggered footprint .018” diameter, gold plated

AL57 – .190” extension

AL61 – .125” extension

Right Angle Terminals .050" in-line footprint .018" diameter, gold plated

BL57 – .190” extension

BL61 – .125” extension

Surface Mount .018” diameter, gold-plated

CL1

Guide Pin and Latch Options

01 – Guide pin installed in end cavities of socket strip. Blank holes in end cavities of pin strip.

02 – Guide pin installed in cavity #1 of socket Strip. Blank holes in cavity #1 of pin strip.

03 – Spring latches installed in end cavities of socket strip. Latch clips installed in end cavities of pin strip. For use with MTV1 only.

04 – Spring latch installed in center cavity of socket strip. Spring latch installed in center cavity of pin strip. For use with MTV1 only.

01

02

03

04

Guide Pins In End Cavities

Guide Pins In Cavity #1

End Latches

Center Latch

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

49

Microstrips .050" Contact Spacing

MT

Connector Weights

Contact (with std. 1/2”

copper pigtails)

.040 gms.

.021 gms.

MTB

MTV

Insulator

(per contact

cavity)

socket

.006 gms.

.014 gms.

.004 gms.

socket

Guide

Post

Stainless

Steel

.035 gms.

Male

.035 gms.

.074 gms.

Latch

Female

Terminal Dimensions

.170 (4.32) MAX.

.100 (2.54)

.065 (1.65) MAX.

.018 (.45)

.002 (.05)

L1: .500 (12.7)

L2: 1.00 (25.4)

L57: .190 (4.83)

.065 (1.65) MAX.

L6: .125 (3.18) MIN+ .015 (0.38)

.018 (1.65)

.002 (0.5)

BL57: .190 (4.83)

BL61: .125 (3.18) MIN+ .015 (0.38)

Solder Cup

Straight Terminals

Right Angle Terminals

.050" Centers

.0120 (0.30)

.001 (0.03)

CAV #1

ALL EVEN

NUMBERED

CONTACTS

.070 (1.78)

.030 (0.76)

AL57 .190 (4.83)

AL61 .125 (3.18)

CAV #1

SOCKET

.010 (0.25)

TYP

.160

(4.06)

.140

.100 (2.54)

(3.56)

.100 (2.54)

.050 (1.27) MIN

SOLDER DIPPED

.025 (0.64)

REF

Right Angle Terminals

.100" Spacing Staggered

Surface Mount Terminals

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

50

Microstrips .050" Contact Spacing

MT

Latch Dimensions

.250 (6.35)

MAX

.0085 (0.22)

REF

.076 (1.93)

MAX

.020 (0.51)

REF

.077 (1.96)

MAX

.035 (0.89)

REF

.035 (0.89)

REF

.010 (6.25)

REF

.107 (2.72) MAX

.050 (1.27)

REF

.050 (1.27)

REF

NO CONTACT

.045 (1.14)

MAX

.070 (1.78)

REF

.070 (1.78)

REF

.035 (0.89)

REF

.2835 (7.20)

REF

.035 (0.89)

REF

.100 (2.54)

REF

Male Latch

Female Latch

Guide Pin Dimensions

.032 .003

(0.81 0.08)

DIA.

.200 .010

(5.08 0.25)

Standard Wire Termination Codes

The following termination codes are listed for your

information. For additional codes please refer to

Appendix on page 79 and 81. All wire lengths are

minimum.

Harness Type - (H)

Solid Uninsulated Type - (L)

#25 AWG Gold Plated Copper

#26 AWG per MIL-W-16878 Type E; Teflon Stranded

Length

3 (76.2)

All Yellow

H020

H019

H026

H029

H028

H001

H033

H009

H010

H011

H013

H017

H042

Color Coded

H027

Termination Code

Length

.125 (3.18)

.150 (3.81)

L61

L56

L57

L39

L58

L1

6 (152.4)

H016

8 (203.2)

H034

.190 (4.83)

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

24 (609.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.5)

120 (3048.0)

H025

.250 (6.35)

H002

.375 (9.52)

H003

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

H023

L14

L2

H004

H005

L7

H006

L6

H048

L16

L10

H046

H041

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

51

Microminiature Strip - .100/.050" Contact Spacing

MT

Polarization

Modification code "-01" in the part number

refers to guide posts located on both ends

of the socket side of the 50-MIL STRIP

connector and empty cavities on the pin

side to accept the guide posts.

Although in many cases it is not necessary

to polarize 50-MIL STRIP connectors, there

are several ways to prevent cross plugging.

One method is the use of guide posts that

can be located in specified cavities to assure

that the contacts will align when these post

are positioned before mating.

MTB1 and MTV1 - .050 (1.27) Contact Centers

.032 .003

(0.8ꢀ 0.08ꢁ

DIA.

.200 .0ꢀ0

(5.08 0.25ꢁ

.050 (ꢀ.27ꢁ TYP.

CAVITY

#ꢀ

CAVITY

#ꢀ

.ꢀ26 .005

(3.20 0.ꢀ3ꢁ

.050 (ꢀ.27ꢁ TYP.

.283 .005

(7.ꢀ9 0.ꢀ3ꢁ

A

CAVITY

#ꢀ

CAVITY

#ꢀ

.ꢀ00 .005

(2.54 0.ꢀ3ꢁ

LEAD

LENGTH

.070 .005 (ꢀ.78 0.ꢀ3ꢁꢂ MTV

.080 .005 (2.03 0.ꢀ3ꢁꢂ MTꢃ

.070 .005 (ꢀ.78 0.ꢀ3ꢁꢂ MTV

LEAD

LENGTH

.ꢀ25 (3.ꢀ8ꢁ

.080 .005 (2.03 0.ꢀ3ꢁꢂ MTꢃ

MAX. EPOXY

(INSULATED WIRE ONLYꢁ

.ꢀ25 (3.ꢀ8ꢁ

MAX. EPOXY

(INSULATED WIRE ONLYꢁ

Receptacle

Plug

Part

Number

by Size

A

Number

by Size

A

Number

by Size

A

Number

by Size

A

Number

by Size

A

Number

by Size

A

± ±015 ꢀ0±38ꢁ

MT*1-1**

MT*1-2**

MT*1-3**

MT*1-4**

MT*1-5**

MT*1-6**

MT*1-7**

MT*1-8**

MT*1-9**

MT*1-10**

MT*1-11**

MT*1-12**

MT*1-13**

MT*1-14**

MT*1-15**

MT*1-16**

MT*1-17**

MT*1-18**

MT*1-19**

MT*1-20**

.070 (1.78)

.120 (3.05)

.170 (4.32)

.220 (5.59)

.270 (6.85)

.320 (8.13)

.370 (9.40)

.420 (10.67)

.470 (11.94)

.520 (13.60)

.570 (14.48)

.620 (15.75)

.670 (17.02)

.720 (18.29)

.770 (19.56)

.820 (20.83)

.870 (22.10)

.920 (23.37)

.970 (24.64)

1.020 (25.91)

MT*1-21** 1.070 (27.18)

MT*1-22** 1.120 (28.45)

MT*1-23** 1.170 (29.72)

MT*1-24** 1.220 (30.99)

MT*1-25** 1.270 (32.36)

MT*1-26** 1.320 (33.53)

MT*1-27** 1.370 (34.80)

MT*1-28** 1.420 (36.07)

MT*1-29** 1.470 (37.34)

MT*1-30** 1.520 (38.61)

MT*1-31** 1.570 (39.88)

MT*1-32** 1.620 (41.15)

MT*1-33** 1.670 (42.42)

MT*1-34** 1.720 (43.69)

MT*1-35** 1.770 (44.96)

MT*1-36** 1.820 (46.23)

MT*1-37** 1.870 (47.50)

MT*1-38** 1.920 (48.77)

MT*1-39** 1.970 (50.04)

MT*1-40** 2.020 (51.31)

MT*1-41**

MT*1-42**

MT*1-43**

MT*1-44**

MT*1-45**

MT*1-46**

MT*1-47**

MT*1-48**

MT*1-49**

MT*1-50**

MT*1-51**

MT*1-52**

MT*1-53**

MT*1-54**

MT*1-55**

MT*1-56**

MT*1-57**

MT*1-58**

MT*1-59**

MT*1-60**

2.070 (52.58)

2.120 (53.85)

2.170 (55.12)

2.220 (56.39)

2.270 (57.66)

2.320 (58.93)

2.370 (60.20)

2.420 (61.47)

2.470 (62.74)

2.520 (64.01)

2.570 (65.28)

2.620 (66.55)

2.670 (67.82)

2.720 (69.09)

2.770 (70.36)

2.820 (71.63)

2.870 (72.90)

2.920 (74.17)

2.970 (75.44)

3.020 (76.71)

MT*1-61**

MT*1-62**

MT*1-63**

MT*1-64**

MT*1-65**

MT*1-66**

MT*1-67**

MT*1-68**

MT*1-69**

MT*1-70**

MT*1-71**

MT*1-72**

MT*1-73**

MT*1-74**

MT*1-75**

MT*1-76**

MT*1-77**

MT*1-78**

MT*1-79**

MT*1-80**

3.070 (77.98)

3.120 (79.25)

3.170 (80.52)

3.220 (81.79)

3.270 (83.06)

3.320 (84.33)

3.370 (85.60)

3.420 (86.87)

3.470 (88.14)

3.520 (89.41)

3.570 (90.68)

3.620 (91.95)

3.670 (93.22)

3.720 (94.49)

3.770 (95.76)

3.820 (97.03)

3.870 (98.30)

3.920 (99.57)

MT*1-81**

MT*1-82**

MT*1-83**

MT*1-84**

MT*1-85**

MT*1-86**

MT*1-87**

MT*1-88**

MT*1-89**

MT*1-90**

MT*1-91**

MT*1-92**

MT*1-93**

MT*1-94**

MT*1-95**

MT*1-96**

MT*1-97**

MT*1-98**

4.070 (103.38) MT*1-101** 5.070 (128.78)

4.120 (104.65) MT*1-102** 5.120 (130.05)

4.170 (105.92) MT*1-103** 5.170 (131.32)

4.220 (107.19) MT*1-104** 5.220 (132.59)

4.270 (108.46) MT*1-105** 5.270 (133.86)

4.320 (109.73) MT*1-106** 5.320 (135.13)

4.370 (111.00) MT*1-107** 5.370 (136.40)

4.420 (112.27) MT*1-108** 5.420 (137.67)

4.470 (113.54) MT*1-109** 5.470 (138.94)

4.520 (114.81) MT*1-110** 5.520 (140.21)

4.570 (116.08) MT*1-111** 5.570 (141.48)

4.620 (117.35) MT*1-112** 5.620 (142.75)

4.670 (118.62) MT*1-113** 5.670 (144.02)

4.720 (119.89) MT*1-114** 5.720 (145.29)

4.770 (121.16) MT*1-115** 5.770 (146.56)

4.820 (122.43) MT*1-116** 5.820 (147.83)

4.870 (123.70) MT*1-117** 5.870 (149.10)

4.920 (124.97) MT*1-118** 5.920 (150.37)

4.970 (126.24) MT*1-119** 5.970 (151.64)

3.970 (100.84) MT*1-99**

4.020 (102.11) MT*1-100** 5.020 (127.50) MT*1-120** 6.020 (152.91)

NOTE: MTB1 available in up to 120 contacts.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

52

Microminiature Strip - .100/.050" Contact Spacing

MT

MTB2 and MTV2 - .100 (2.54) Contact Centers

.032 .003

(0.8ꢀ 0.08ꢁ

DIA.

.200 .0ꢀ0

(5.08 0.25ꢁ

CAV #ꢀ

A

CAVITY

#ꢀ

.ꢀ00 (2.54ꢁ TYP.

.070 .005 (ꢀ.78 0.ꢀ3ꢁꢂ MTV

.080 .005 (2.03 0.ꢀ3ꢁꢂ MTꢃ

.070 .005 (ꢀ.78 0.ꢀ3ꢁꢂ MTV

.080 .005 (2.03 0.ꢀ3ꢁꢂ MTꢃ

CAVITY

#ꢀ

.ꢀ00 (2.54ꢁ

TYP.

CAVITY

#ꢀ

.ꢀ26 .005

(3.20 0.ꢀ3ꢁ

.283 .005

(7.ꢀ9 0.ꢀ3ꢁ

.ꢀ00 .005

(2.54 0.ꢀ3ꢁ

LEAD

LENGTH

LEAD

LENGTH

.ꢀ25 (3.ꢀ8ꢁ

MAX. EPOXY

(INSULATED WIRE ONLYꢁ

.ꢀ25 (3.ꢀ8ꢁ

MAX. EPOXY

(INSULATED WIRE ONLYꢁ

Plug

Receptacle

Part

Number

by Size

Part

Number

by Size

A

± ±015 ꢀ0±38ꢁ

3.070 (77.98)

3.170 (80.52)

3.270 (83.06)

3.370 (85.60)

3.470 (88.14)

3.570 (90.68)

3.670 (93.22)

3.770 (95.76)

3.870 (98.30)

3.970 (100.84)

4.070 (103.38)

4.170 (105.92)

4.270 (108.46)

4.370 (111.00)

4.470 (113.54)

4.570 (116.08)

4.670 (118.62)

4.770 (121.16)

4.870 (123.70)

4.970 (126.24)

5.070 (128.78)

5.170 (131.32)

5.270 (133.86)

5.370 (136.40)

5.470 (138.94)

5.570 (141.48)

5.670 (144.02)

5.770 (146.56)

5.870 (149.10)

5.970 (151.64)

MT*2-1**

MT*2-2**

MT*2-3**

MT*2-4**

MT*2-5**

MT*2-6**

MT*2-7**

MT*2-8**

MT*2-9**

MT*2-10**

MT*2-11**

MT*2-12**

MT*2-13**

MT*2-14**

MT*2-15**

MT*2-16**

MT*2-17**

MT*2-18**

MT*2-19**

MT*2-20**

MT*2*21**

MT*2-22**

MT*2-23**

MT*2-24**

MT*2-25**

MT*2-26**

MT*2-27**

MT*2-28**

MT*2-29**

MT*2-30**

.070 (1.78)

MT*2-31**

MT*2-32**

MT*2-33**

MT*2-34**

MT*2-35**

MT*2-36**

MT*2-37**

MT*2-38**

MT*2-39**

MT*2-40**

MT*2-41**

MT*2-42**

MT*2-43**

MT*2-44**

MT*2-45**

MT*2-46**

MT*2-47**

MT*2-48**

MT*2-49**

MT*2-50**

MT*2*51**

MT*2-52**

MT*2-53**

MT*2-54**

MT*2-55**

MT*2-56**

MT*2-57**

MT*2-58**

MT*2-59**

MT*2-60**

.170 (4.32)

.270 (6.86)

.370 (9.40)

.470 (11.94)

.570 (14.48)

.670 (17.02)

.770 (19.56)

.870 (22.10)

.970 (24.64)

1.070 (27.18)

1.170 (29.72)

1.270 (32.26)

1.370 (34.80)

1.470 (37.34)

1.570 (39.88)

1.670 (42.42)

1.770 (44.96)

1.870 (47.50)

1.970 (50.04)

2.070 (52.58)

2.170 (55.12)

2.270 (57.66)

2.370 (60.20)

2.470 (62.74)

2.570 (65.28)

2.670 (67.82)

2.770 (70.36)

2.870 (72.90)

2.970 (75.44)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

53

Micro Edgeboard - .050" Contact Spacing

MEB

The Micro Edgeboard (MEB) connector series

ging. Contacts are on .050 (1.27) center

provides a combination of high density and high spacings. A variety of termination types are

reliability for applications in airborne and space

systems, computers and peripherals, and

industrial /commercial control systems. This

series incorporates the proven

available, including 90˚ or right angle pigtails

for multi-layered P.C. boards, "coke bottle”

termination for double-sided P.C. boards.

Harnessing capability is also available for both

pin and socket sides.

MICROPIN^TM/MICROSOCKET^TMcontact. This

contact has an outstanding record of high

reliability and millions of contacts are in use in

various applications where electrical

interconnects are used.

The MEB, including the SBR 90˚ or right angle

variation available for multi-layer boards, can

be mounted on the female (daughter) side of

double or single-sided P.C. boards. The mating

male (mother) board side can have the

terminations formed to meet the application

demands.

The MEB has machined aluminum shells for

ruggedness, diallyl phthalate insulator for top

electrical performance and a 36-position

polarization key system to prevent cross plug-

Conforms to MIL-C-55302/120 thru 123. (not

qualified)

Specifications

MATERIALS AND FINISHES

TERMINATION TYPES

Shell:

6061-T6 Aluminum Alloy per QQ-A-200/8 or QQ-A-225/8, electroless nickel per

SAE AMS-C-26074, Class 4, except .0010 to .0015 (0.03 to 0.04) thick or conversion

coating per MIL-C-5541, Class 3, color gold.

Consult factory for stranded wie lead modifications codes.

MECHANICAL FEATURES

Copper Alloy, 50 microinch gold per ASTM B488, Type II, Code C, Class 1.25

303 stainless steel, passivated per QQ-P-35.

Contact, Pin and Socket:

Jackscrew/Jackpost:

Insulator:

Size or Length:

Coupling:

2 sizes

Friction/Jackscrew

Shells, polarizing keys (36 positions)

Polarization:

Glass-filled diallyl phthalate per MIL-M-14, Type SDG-F, color green Polyester

per MIL-M-24519, Type GPT-30F , color black available for MEB-128 upon

request.

Contact Spacing Centers: .050 (1.27)

Shell Styles: Plug and receptacle

How to Order

Not applicable for printed

circuit board configurations

shown on pages 55 & 56

MEB 1 - 128

P

* * * * *

R

RoHS COMPLIANCE

SERIES PREFIX

CONTACT SPACING

LAYOUT

CONTACT TYPE

TERMINATION MODIFICATIONS

LEAD LENGTH

OTHER MODIFICATIONS

TERMINATION MODIFICATIONS

SERIES PREFIX

MEB -

Micro edgeboard, plug with twist pin

contacts or recept. with microsocket

contacts.

L -

H -

Uninsulated solid wire

Insulated stranded round harness

wire

S -

Solder pots

BR -

PC board right angle, socket side only

CONTACT SPACING

LEAD LENGTH

1 - .050 (1.27) centers 128/184

2 - .100 (2.54) centers 64/92

(alternate contact holes)

Consult factory for wire lead modification codes.

OTHER MODIFICATIONS

Consult factory

LAYOUT

64, 92, 128, 184

CONTACT TYPE

P - Pin

S - Socket

* For other contact spacing acommodations consult customer service.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

54

Micro Edgeboard - .050" Contact Spacing

MEB

Plug (Mother Board)

MEB1-12BS

A

.050 (1.27)

B1

B

A1

.050

(1.27)

RETAINING PIN HOLES

.250 (6.35)

C

#24 AWG

H

F

E

.180 .005

(4.57 .13)

G

D

.0945 .0035 (2.40 .09) DIA.

THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY

.187 (4.75) DIA. THRU "B"SIDE ONLY

Weight

oz. (gm.) Max.

A

B

C

D

E

F

Max.

G*

Max.

H

Part No.

.015 (0.38)

.010 (0.25)

.020 (0.51)

128S

128SBR

.5 (14.17)

3.950 (100.33)

.250 (6.35)

.400 (10.16)

3.700 (93.98)

.300 (7.62)

.280 (7.11)

.030 (0.76)

.200 (5.08)

.5 (14.17)

*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.

Receptacle (Daughter Board)

MEB1-12BS

A

.050 (1.27)

B1

B

A1

.050

(1.27)

RETAINING PIN HOLES

.250 (6.35)

C

#24 AWG

H

F

E

.180 .005

(4.57 .13)

G

D

.0945 .0035 (2.40 .09) DIA.

THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY

.187 (4.75) DIA. THRU "B"SIDE ONLY

Weight

A

B

C

D

E

F

G*

H

Part No.

128S

128SBR

oz. (gm.) Max.

.ꢀ1ꢁ (ꢀ.ꢂ8)

.ꢀ1ꢀ (ꢀ.2ꢁ)

Max.

.ꢀ2ꢀ (ꢀ.ꢁ1)

.5 (14.17)

3.950 (100.33)

.250 (6.35)

.400 (10.16)

3.700 (93.98)

.300 (7.62)

.280 (7.11)

.030 (0.76)

.200 (5.08)

*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

55

Micro Edgeboard - .050" Contact Spacing

MEB

Plug (Mother Board)

MEB1-184P

.0945 +_ .0035

(2.40 +_ 0.09)

3 PLACES

B2

A

B1

C

A1

B1

B

.075

(1.91)

.050 (1.27) TYP

A2

A1

RETAINING PIN HOLES

D

H

G

#25 AWG

(MEB1-184P)

or

F

TYP

E

.075 (1.91)

.075 (1.91) TYP.

Weight

oz. (gm.) Max.

A

B

C

D

E

F

G

H

Part No.

184P

+_.015 (0.38)

+_.010 (0.25)

+_.005 (0.13)

+_.010 (0.25)

+_.025 (0.64)

1.0 (28.35)

5.800 (147.32)

.343 (8.71)

2.775 (70.49)

.400 (10.16)

.250 (6.35)

.280 (7.11)

.350 (8.89)

.275 (6.99)

Receptacle (Daughter Board)

MEB1-184S

.050 (1.27) TYP.

A

C

A1

C

B

.075

(1.91)

B1

RETAINING PIN HOLES

.250

(6.35)

D

E

#24 AWG

H

F

.180 .005

(4.57 0.13)

J

G

.0945 .0035 (2.40 .09) DIA.

THRU .187 (4.75) X .075 (1.91) DEEP "C" BORE

3 PLACES-A SIDE ONLY.

.187 (4.75) DIA. 3 PLACES-B SIDE ONLY

Weight

oz. (gm.) Max.

A

B

C

D

E

F

Max.

G

Max.

H

J

Part No.

.ꢀ1ꢁ (ꢀ.ꢂ8)

.ꢀ1ꢀ (ꢀ.ꢃꢁ)

.ꢀꢀꢁ (ꢀ.1ꢂ)

.ꢀ1ꢀ (ꢀ.ꢃꢁ)

.ꢀꢃꢀ (ꢀ.ꢁ1)

.ꢀ1ꢀ (ꢀ.ꢃꢁ)

184S

184SBR

1.0 (28.35)

5.800 (147.32)

.343 (8.71)

2.775 (70.49)

.400 (10.16)

.300 (7.62) .280 (7.11)

.030 (0.76)

.200 (5.08)

.250 (6.35)

All round pigtail #25 AWG wire termination designs available for the MEB1-12B receptacle will apply on the MEB1-184 series also.

*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

56

Micro Edgeboard - .050" Contact Spacing

MEB

PC Board Right Angle

MEB1-128SBR

.110

(2.79)

MIN.

.100

(2.54)

ROW B

EVEN*

.075

.050

(1.91)

(1.27)

.275

ROW B

ODD*

(6.99)

B6 B4 B2

B7

B1

A1

A6

A2

A3

.150

A7

A5

ROW A

EVEN*

ROW A

ODD*

(3.81)

.075

.180

(1.91)

(4.57)

.100

(2.54)

PC

BOARD

3 PLACES

B1

A1

Keying Accessory - Key and Retaining Pin

Polarizing Hardware Kit

.ꢀ04 .ꢀꢀ1

.ꢀ29 (ꢀ.74ꢂ

DIA. MAE.

MEB-128-P/N 320-9514-003

MEB-184-P/N 320-9514-002

(ꢀ.86 ꢀ.ꢀ0ꢂ

Contains 2 polarizing keys and 4 spiral pins.

H

A

MEB-184

P/N 980-0004-129

#2-56 UNC-2B

TꢁRHAD

.ꢀ04 .ꢀꢀ1

(ꢀ.86 ꢀ.ꢀ0ꢂ

B

.ꢀ29 (ꢀ.74ꢂ

DIA. MAE.

C

.1ꢀ6 .ꢀꢀ0

.186 .ꢀꢀ0 ꢁHE.

(2.69 ꢀ.ꢀ8ꢂ

DIA.

D

(4.72 ꢀ.ꢀ8ꢂ

MEB-128

P/N 980-0003-879

P/N 201-9509-000

A

B

C

D

E

.003 (0.08)

.005 (0.13)

.003 (0.08)

.010 (0.25)

.081 (2.06)

.325 (8.26)

.089 (2.26)

.250 (6.35)

.313 (7.95)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

57

Micro Edgeboard - .050" Contact Spacing

Jackscrew/ Jackpost Assembly (MEB 64 & 128 Sizes Only)

Jackpost Kit

MEB

MEB plug or receptacle-P/N 320-9514-001

RECEPTACLE

CONNECTOR

PLUG

CONNECTOR

RETAINING

Contains 2 bushings and 4 spirals pins

JACKPOST

Jackscrew Kit

MEB plug-P/N 320-9521-001

MEB receptacle-P/N 320-9521-000

JACKPOST

.260

(6.60)

MAX.

Contains 2 jackscrew assemblies

#2-56

UNC-2A

THREAD

#2-56

UNC-2A

THREAD

.790 .010

20.07 0.25)

WASHER

[.022 (0.56) thk]

WASHER

[.032 (0.81) THK]

RETAINING

JACKSCREW

ASSEMBLY

RETAINING

.045

(1.14)

REF.

.270 (6.86)

MAX.

JACKSCREW

ASSEMBLY

Plug

Receptacle

with Jackscrew

Special Variations

Alternative Receptacle Configuration

.200

(5.08)

MIN.

4-40 UNC-THD

THRU HOLE

.016

(0.41)

DIA.

.100

(2.54)

31 PLACES

.275

(6.99)

.580

(14.73)

.285

(7.24)

MAX.

.030

(0.76)

.110

(2.79)

2 PLACES

.250

(6.35)

.125 +_ .010

(3.18 +_ 0.25)

2 PLACES

.060

(1.52)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

58

The Centi Line - .075" Contact Spacing

The Cannon Centi connectors are especially

suitable for commercial applications such as

computers, instrumentation, communications

and audio equipment. They are available in D

All Centi connectors use the reliable twist pin

The twist pin contact is recessed within the

insulator housing while the rugged cylindrical

socket is exposed. When the connector halves

are mated, the chamfered sockets guide the

contact design in a 5 amp version terminated

on .075 (1.91) and .100 (2.54) centers. The

Centi contact is crimp removable, connectors

subminiature size metal shell rectangular, plas- are available for customer assembly. Standard pins into positive alignment. The Centipin^TM

tic shell rectangular and strip configurations.

crimp and assembly tools are available.

contact, now under compression, forms a

multi-point contact with the Centisocket^TMto

provide a high degree of reliability.

Standard Data

• Contact rating: 5 amps max, except BR

Series (2 amps max.)

• Contact retention: Crimp snap-in/removable.

• Contact materials and finish: Copper alloy,

gold- plated per ASTM B488, Type II, Code

C, Class 1.25.

• Minimum contact centers: 0.075 (1.91).

• Wire sizes: #22 thru #26 AWG, stranded or

solid.

• Mating/unmating force: 12 oz. per contact,

max.

• Contact termination: Multiple indent crimp.

Performance Data

Test

Method

Criteria of Acceptance

Dielectric Withstanding Method 301:

Voltage

1,000 VAC at sea level

No breakdown

300 VAC at 70,000' altitude

Insulation Resistance

Thermal Shock

Method 302, Condition A

5,000 megohms minimum

No physical damage

Method 107, Condition A

+55˚C to +85˚C

Physical Shock

Method 213, Condition I:

100 G's, 3 axes, 6 millisecond

duration sawtooth pulse

No physical damage

No loss of continutiy> 1/µsec

Vibration

Durability

Method 204, Condition B:

No physical damage

15 G's, 10-2,000 Hz, 12 hours

No loss of continuity> 1µsec

500 cycles of mating and

unmating, 500 CPH max.

No mechanical or electrical defects

Moisture Resistance

Salt Spray

Method 106, Omit 7a and 7b

Insulation resistance > 100 megohms

Method 101, Condition B:

48 hours

Shall be capable of mating and unmating

and meet contact resistance requirements

Contact Resistance

Contact Retention

Method 307:

At 5 amps

9 milliohms maximum

-

4 lb. minimum axial load

(after 10 insertion extraction cycles)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

59

Double Density D - .075" Contact Spacing

2D

The Double Density D is a rectangular connector in

the popular D Subminiature shell configuration

featuring double the contact density in the same

insert area. The Double Density D connector can

positions are reversed; the flexible Centipin^TM

Contacts are crimp removable type.

contacts are recessed in the insulator and the more

rugged Centisocket^TMcontacts are exposed. This

reversal of positions, and the chamfered-entry of the

The Double Density D connector is available in the

five popular shell and insert sizes accommodating up

to 100 contacts. These connectors mate exclusively

with other Double Density D connectors. A wide

range of accessories can be used, including junction

shells, potting cups, switching shells, guide pin

plates, and dust caps.

thus accommodate up to 100 contacts instead of 50. sockets, assures positive mating even under severe

misalignment conditions. The contacts are retained

This double contact density is achieved by using

field-proven, highly reliable Centipin^TM/Centisocket^TM

contacts on .075 (1.91) centers, in the positive con-

tact alignment design. In this design contact

in the monobloc insulator by a resilient internal

shoulder that snaps into a locking groove in the con-

tact. The chamfered front of the contact will not

damage the internal shoulder in the insulator.

1. STANDARD D HARDWARE-

Including full range of D-Subminiature accessories

2. ONE PIECE MONOBLOCK INSULATOR-

1

2

glass-filled nylon material

3. CONTACT RETENTION-

thermoplastic internal shoulder snaps into a locking groove in the contact.

Retention Force: 8 lbs. min. initially, 4 lbs. min. after 10 cycles.

3

4

4. TWIST PIN CONTACTS-

seven outer wiping surfaces assure electrical continuity even under severe

shock and vibration

5. POSTIVE CONTACT ALIGNMENT-

flexible pin is recessed in insulator cavity and rugged socket is exposed

6. GUIDE-IN KEYS AND KEYWAYS-

5

6

assure alignment during mating and prevent scooping

Specifications

WEIGHT

MATERIALS AND FINISHES

MECHANICAL FEATURES

*Shell

Steel, cadmium plated with yellow chro-

Sizes

- Five shell sizes: E, A, B, C, and D

-

Part Number

Weight (in gr.)

Weight (in oz.)

by shell size Less With Contacts Less With Contacts

mate supplementary coating

Coupling

- Friction or jackscrew

- Keystone-shaped shells

- .075 (1.91)

-

Mounting Hardware Stainless steel

2DE19P

2DE19S

2DA31P

2DA31S

2DB52P

2DB52S

2DC79P

2DC79S

2DD100P

2DD100S

4.05

3.75

5.02

5.17

.142

.133

.183

.173

.308

.252

.413

.342

.453

.386

.177

.182

.239

.255

.402

.390

.555

.551

.633

.651

Polarization

Contact Spacing

and Float Mounts

-

Insulator

Glass-filled nylon

5.20

6.78

Contact Termination - Crimp snap-in

-

Contacts

Copper alloy, gold plate

A106 Gold over brass

A156 Gold over brass

A197 Tin/Lead over steel

4.90

7.22

Alternate finish,

Modification Code

8.75

11.40

11.05

15.73

15.62

17.95

18.45

7.15

11.70

9.70

*Brass non-magnetic also available

12.85

10.95

How to Order

2D

E

A

19

31

S

P

* * * *

BR

F

R

RoHS COMPLIANCE

SERIES

SHELL SIZE

FLOAT MOUNTS

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION

MODIFICATION

NOTE: Connectors may be ordered less contacts by adding the mod callout "FO" at end of number.

Contacts are then supplied in bulk form.

SERIES

2D - Double Density D

CONTACT ARRANGEMENT

19, 31, 52, 79 and 100

TERMINATION

BR - 90˚ right angle PCB mounting

(For BR Series use "P" to designate jackpost)

CONTACT TYPE*

P - Pin

SHELL SIZE

E, A, B, C and D

MODIFICATION

F171 - Jackpost assembly

F172 - Standard jackscrew

F173 - Low profile jackscrew

For other modifications consult factory

Dimensions shown in inch (mm)

S - Socket

FLOAT MOUNTS

Omit if not required

* Accommodates AWG #26 thru #22

Specifications and dimensions subject to change

www.ittcannon.com

60

Double Density D - .075" Contact Spacing

2D

Standard Shell

M

A

L

J

K

B

1ꢀ˚ (TYP)

G

+

D

E

+

H

C

V

TWO MTG. HOLES

.123 .ꢀꢀ5

(3.12 ꢀ.13)

T

+ .020 (0.51)

- .000 (0.00)

+ .020 (0.51)

- .000 (0.00)

Part Number

by Shell Size

Part Number

by Shell Size

2DE19P

2DE19S

2DA31P

2DA31S

2DB52P

.250 (6.35)

.236 (5.99)

2DB52S

2DC79P

2DC79S

2DD100P

2DD100S

.236 (5.99)

.856(21.74)MAX.

Float Mount

A

B

K

G

J

N

10˚ (TYPꢂ

+

H

+

E

D

.03ꢀ (.81ꢀꢂ

TOTAL

DIAMETRAL

FLOAT

M

TWO MTG. HOLES

.0885 .00ꢀ5

C

V

(ꢀ.ꢀ48 0.0ꢁ4ꢂ

Part Number

A

B

C

D

E

G

H

J

K

L

M

N

V

by Shell Size .015 (0.38)

.010 (0.25) .010 (0.25) .010 (0.25) .015 (0.38) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25)

Max.

2DE19P

2DE19S

2DA31P

2DA31S

2DB52P

2DB52S

2DC79P

2DC79S

1.213 (30.81) .697 (17.70) .984 (24.99) .360 (9.14) .494 (12.55) .759 (19.28) .422 (10.72) .036 (.914) .236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10)

1.213 (30.81) .640 (16.26) .984 (24.99) .308 (7.82) .494 (12.55) .759 (19.28) .422 (10.72) .032 (213)

1.541 (39.14) 1.025 (26.03) 1.312 (33.32) .360 (9.14) .494 (12.55) 1.083 (27.51) .422 (10.72) .036 (.914)

1.541 (39.14) .968 (24.58) 1.312 (33.32) .308 (7.82) .494 (12.55) 1.083 (27.51) .422 (10.72) .032 (213)

2.088 (53.03) 1.583 (40.21) 1.852 (47.04) .378 (9.60) .494 (12.55) 1.625 (41.27) .422 (10.72) .036 (.914)

2.088 (53.03) 1.508 (38.30) 1.852 (47.04) .308 (7.82) .494 (12.55) 1.625 (41.27) .422 (10.72) .032 (213)

2.729 (69.31) 2.231 (56.67) 2.500 (63.50) .378 (9.60) .494 (12.55) 2.272 (57.71) .422 (10.72) .036 (.914)

2.729 (69.31) 2.156 (54.76) 2.500 (63.50) .308 (7.82) .494 (12.55) 2.272 (57.71) .422 (10.72) .032 (213)

.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)

.236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10)

.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)

.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10)

.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)

.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10)

.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)

.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10)

.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)

2DD100P 2.635 (66.92) 2.127 (54.02) 2.406 (61.11) .484 (12.29) .605 (15.37) 2.178 (55.32) .534 (13.56) .036 (.914)

2DD100S 2.635 (66.92) 2.062 (52.37) 2.406 (61.11) .420 (10.67) .605 (15.37) 2.178 (55.32) .534 (13.56) .032 (213)

For shell with float mounts, add letter F after shell size, e.g., 2DEF19P.

Jackscrew/Jackpost Assembly

#4-40 UNC-2B

THREAD

.ꢀ80 .025 ꢁGri

(4.57 0.64) ꢂLengt

#4-40 UNC-2A THREAD

.025 (0.64)

MAX.

.025 (0.64)

MAX.

.233 (5.92)

.223 (5.66)

.ꢀ80 .025 ꢁGri

(4.57 0.64) ꢂLengt

.620 .0ꢀ0

(ꢀ5.75 0.25)

.230 (5.84) MAX.

.325 .0ꢀ5

(8.26 0.38)

#4-40 UNC-2A THREAD

Standard (F172) Jackscrew

(factory installed)

Low Profile (F173) Jackscrew

(factory installed)

Jackpost (F171)

Front Panel Connector Mounting Only

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

61

Double Density D - .075" Contact Spacing

2D

Contact Arrangements

All views are pin front face. Use reverse order for socket side.

1

7

6

1

10

21

31

1

17

35

52

13

19

11

22

18

36

14

DE

DA

DB

52 Contacts

19 Contacts

31 Contacts

1

26

27

52

76

51

75

1

26

53

79

27

54

100

DC

79 Contacts

DD

100 Contacts

Cavity identification numbers are shown for reference only and do not appear on insulator front face. However they do appear on rear of insulator.

90˚ PCB Mounting - 3 Row

.0375

(0.95)

REF.

.148

(3.76)

MIN.

.075

(.190)

REF.

.125 (3.18)

.115 (2.92)

DIA. TYP.

.130 (3.30)

.100 (2.54)

2x

.690

(17.53)

MAX.

.253 (6.43)

.233 (5.92)

.100

(2.54)

REF.

.100

(2.54)

REF.

.510 (12.95)

.490 (12.45)

B

CAV. #1

.065 (1.65)

.075 (1.90)

.510 (12.95)

.480 (12.18)

#4-40

UNC-2B THREAD

(2 PLACES)

LAST CAV.

A

PCB Termination Leads

(all contact arrangements)

.024 (6.10) to .028 (7.11).

LAST

LEAD

Suggested finished PC hole

Size .033 (8.38) +_ .003 (0.08)

LEAD #1

Part Number

by Shell Size

A

B

C

Max.

.015 (0.38)

1.215 (30.86)

1.540 (39.12)

2.090 (53.09)

2.730 (69.34)

.010 (0.25)

2DE19SBRP

2DA31SBRP

2DB52SBRP

2DC79SBRP

.984 (24.99)

1.312 (33.32)

1.852 (47.04)

2.500 (63.50)

.690 (17.53)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

62

Double Density D - .075" Contact Spacing

2D

90˚ PCB Mounting - 4 Row

.0375 (0.94) REF.

.125 (3.18)

.115 (2.92)

.075 (1.90) REF.

.130

(3.30)

MIN.

DIA. TYP.

+

+ +

+

+ + +

+ +

+

+ + +

+

+ + +

+

+ +

+

.790

(20.07)

MAX.

+

+ + + + +

+ + + + + +

+ +

+

.100

(2.54)

REF.

.200

(5.08)

REF.

.100

(2.54)

REF.

.253 (6.43)

.233 (5.92)

.510 (12.95)

.490 (12.45)

B

.075 (1.90)

CAV #1

.065 (1.65)

.620 (15.75)

.590 (14.99)

+

#4-40

UNC-2B THREAD

(2 PLACES)

CAV #100

A

LEAD

#100

LEAD

#1

Part Number

by Shell Size

A

B

C

+_ .015 (0.38)

2.635 (66.93)

+_ .010 (0.25)

2.406 (61.11)

Max.

2DD100SBRP

.790 (20.07)

Contact Arrangements - Page 62

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

63

Double Density D - .075" Contact Spacing

2D

Panel Cutouts

A

10˚0' TYP.

B

G

F

E

H

FULL R

K TYP R

.032 (0.81) R MAX. TYP

D

C

G

D

C

Mtg.

Conn. Method

A

B

C

D

E

F

G

H

K

+_ .005 (0.13) +_ .005 (0.13)

+_ .005 (0.13)

.257 (6.53)

.225 (5.71)

.257 (6.53)

.225 (5.71)

.257 (6.53)

.225 (5.71)

.257 (6.53)

.225 (5.71)

.312 (7.92)

.278 (7.06)

+_ .002 (0.05)

.120 (3.05)

+_ .002 (0.05)

.060 (1.52)

+_ .002 (0.05)

.083 (2.11)

.132 (3.35)

.083 (2.11)

.132 (3.35)

.083 (2.11)

.132 (3.35)

.083 (2.11)

.132 (3.35)

.083 (2.11)

.132 (3.35)

2DE

2DA

2DB

2DC

2DD

Front

Rear

Front

Rear

Front

Rear

Front

Rear

Front

Rear

.874 (22.20)

.806 (20.47)

1.202 (30.53)

1.134 (28.80)

1.743 (44.27)

1.674 (42.52)

.437 (11.10)

.403 (10.24)

.601 (15.26)

.567 (14.40)

.872 (22.15)

.837 (21.26)

.984 (24.99)

1.312 (33.32)

1.852 (47.04)

.492 (12.50)

.656 (16.66)

.926 (23.52)

.513 (13.03)

.449 (11.40)

.513 (13.03)

.449 (11.40)

.513 (13.03)

.449 (11.40)

.513 (13.03)

.449 (11.40)

.623 (15.82)

.555 (14.10)

2.391 (60.73) 1.196 (30.38)

2.326 (59.08) 1.163 (29.54)

2.297 (58.34) 1.149 (29.18)

2.218 (56.34) 1.109 (28.17)

2.500 (63.50) 1.250 (31.75)

2.406 (61.11) 1.203 (30.56)

For contact part numbers, termination tooling and assembly see pages 67-69.

Panel Mounting

3/32 THICKNESS (REF.)

RECOMMENDED

RIVET THICKNESS

Front Mounting

Standard

Front Mounting

Float

RIVET THICKNESS

Rear Mounting

Float

Standard

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

64

Centi-D Loc-.075" Contact Spacing

CDL

A subminiature all plastic high density "D" rectan-

gular connector. The CDL is

a general purpose

connector with a peripheral o-ring and wire sealing

gasket. Connector utilizes rear insertion, front re-

lease, crimp snap-in size 22, centi-loc contacts

installable by the custormer or, if preferred, by the

factory.

MATERIAL

Insulator:

Black Nylon

Dielectric Gasket:

Contact:

Polychloroprene

Copper Alloy, Gold Plated

Silicone

Seal Ring

How to Order

CDL 2A - 139 P - * - F0

R

SERIES

CONTACT ARRANGEMENT

139

RoHS

COMPLIANCE

Centi-D Loc Series

(Consult customer service for other sizes)

SERIES

TYPE

CONTACT STYLE

P - Centi-loc pin

2

- No lock (mtg. holes)

2A - No lock type with rear gasket

S - Centi-loc socket

CONTACT ARRANGEMENT

MODIFICATION CODES

CONTACT STYLE

F0 - Less contacts

MODIFICATION CODES

Plug

.560 (14.22)

MAX.

2.625 (66.68)

2.344 (59.54)

.005 (0.13)

CAVITY #1

.625 (15.88)

.010 (0.25)

.625 (15.88)

.010 (0.25)

CONTACT

HEIGHT

.065 (1.65)

.045 (1.14)

HEIGHT

.035 (0.89)

.015 (0.38)

SILICONE

SEAL RING

.260 (6.60)

.010 (0.25)

.175 (4.44) MAX.

.540 (13.72)

MAX.

.535

(13.59)

MAX.

2.025 (51.44) MAX.

2.025 (51.44)

MAX.

.150 (3.81)

.010 (0.25)

.150 (3.81)

.010 (0.25)

Plug

Receptacle

Recommended Panel Cutouts

.125 (3.18)

DIA. TYP.

.2035 (51.69)

.016 (0.41)

.063 (1.60)

RAD. MAX.

.565 (14.35)

.005 (0.13)

2.344 (59.54)

.005 (0.13)

Contact Arrangements

Engaging Face View

CAVITY #1

CAVITY #70

CAVITY #92

CAVITY #117

CAVITY #139

Plug

Receptacle

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

65

Strip Connectors - .100"/.075" Contact Spacing

CTA

CENTI-LOC connectors are low-cost nylon

strip connectors designed for commercial

applications such as instrumentation, commu-

nications, and medical equipment. They are

available in continuous strip form up to a max-

imum length of 6 inches (152.40mm), accom-

modating from 1 to 60 rear insertion, front

release, crimp snap-in size 22 CENTIPIN^TM/

CENTISOCKET^TMcontacts. These contacts

utilize a proven positive contact alignment

design, giving additional contact strength and

positive contact alignment during mating.

These connectors can be ordered in kit or bulk

form. The kit comprises all the parts necessary

to assemble one complete 6-inch (152.40) strip

connector with 60 contacts on .100 (2.54) cen-

ters or a 4-inch (101.60mm) strip with 53 con-

tacts on .075 (1.91) centers. If more then one

connector is required, the parts can be ordered

in bulk and assembled as desired.

Components and Accessories

The CENTI-LOC strip connector can be ordered in

kit or bulk form. The kit includes matin g insulators

with a full compliment of contacts and two guide

posts. If more than one connector is required, the

parts can be ordered in bulk and assembled as

desired.

Kit Form

Insulator

Kits include mating insulators with full

complement of contacts and two guide posts.

.475 (12.06)

MAX.

.275 (6.98)

MAX.

Part

Number

Contact

Center spacing

Guide Posts

Polarizing Posts

CTA3-KIT

CTA4-KIT

CTA3-CTA4-KIT

.075 (1.91)

.100 (2.54)

.075 (1.91) & .100 (2.54)

The guide posts and polarizing posts are inserted in the same manner as the contacts. The guide

posts are inserted into the socket insulator and the polarizing posts are inserted into the pin

insulator. The corresponding contact in the mating insulator must be removed for each.

See assembly instructions.

Contact

Center

Part

Number

Spacing

Type

Socket

Material

Nylon

Insulator

CTA3-IP-53

CTA3-IS-53

CTA4-IP-60

CTA4-IS-60

CTA-GP

.075 (1.91)

.100 (2.54)

Socket

Guide Post

Polarizing Post

Passivated Stainless Steel

P/N 230-9507-000

P/N 230-9506-000

CTA-PP

Dimensional Data

4.031 (102.39)

MAX.

6.031 (153.19)

MAX.

.040 (1.02) MIN.

.075 (1.91)

TYP.

.100 (2.54)

TYP.

.115 (2.92)

MAX.

.115 (2.92)

MAX.

CTA3-.075(1.91) Centers

CTA4-.100(2.54) Centers

Weights

Part

Number

No. of

Contacts

Type

Avy. Weight

oz.

5%

gm.

socket

.185

.203

.230

.241

5.25

5.75

6.30

6.90

CTA3

CTA4

53

60

socket

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

66

The Centi Line - .075" Contact Spacing

2D/CTA

Contacts

Contact Part Number

Part Number

Socket

Type

Socket

031-9540-000

031-9540-004

031-9540-005

030-9542-001 Standard 30µin. plating

030-9542-002 50µ in. plating

A resilient internal shoulder retains the contacts in the

insulator housing. The front of the contact is chamfered

to prevent damage to the internal shoulder as the

contact is pushed into position.

030-9542-004

With inspection hole;

50µ in. plating

N/A

030-9542-011 P.C. tail

.026 dia. x .083 lg. Soc.

030-9542-012 P.C. tail

*031-9540-013

.183 lg. Soc.

.020 dia. x

.183 lg. Pin

P.C. Tail Contacts

031-9540-016

030-9542-014 Long crimp

barrel **

Subtract .064 (1.63) +_ .010 (.25) from pigtail

length when used in 2D pin insulator for potting

well of connector assembly.

031-9540-022

030-9556-000 Small crimp bore

***

For AWG #32 & 30

Subtract .081 (2.08) +_ .010 (.25) from pigtail

length when used in 2D socket insulator for

potting well of connector assembly.

031-9540-007

*031-9540-015

030-9542-022 Small crimp bore

For AWG #28 & 30

030-9542-015 P.C. tail

.232 lg. Soc.

.020 dia. x

.255 lg. Pin

*031-9540-019

030-9542-016 P.C. tail

.444 lg. Soc.

.018 dia. x

.445 lg. Pin

50µ in. plating

NOTE: Plating, except as noted, is 30 micro-inch gold.

* Consult factory for any tail size or plating requirements.

** Special crimp locator required. Part number: 995-0001-714. (L3198-CL-PSL)

*** Use special insertion tip (323-9510-016 &-017).

2D and Centi-Loc Crimp and Assembly Tools

Tool

Locators

Socket

Description

Part Number

M22520/2-01

995-0001-584

L3198-CLP

L3198-CLS

995-0001-338

995-0001-353

M22520/2-01

Insertion Tools For Standard Contact

AWG

Size*

Kit Part Number

(handle and tip)

Tip

Handle

Part Number**

22

CIT-PS-CTA-22

CIT-PS-CTA-24

CIT-PS-CTA-26

CIT-PS-CTA-28

CIT-PS-CTA-30

323-9510-001

323-9510-002

323-9510-003

323-9510-004

323-9510-005

204-9500-000

24

26

CIET-CTA

Handle

Insertion Tips

28

30/P.C. Tail

* Based on wire size per MIL-W-16878 with Type E insulation, use smaller tool for wire with thin

insulation, larger tool for wire having thick insulation.

** The 5 insertion tips (part numbers 323-9510-001 thru - 005). plus handle, and the pin and socket

extaction tips maybe ordered as a SINGLE KIT by specifying the part number CIET-CTA-2.

[Part number: 070143-0002].

Insertion Tools For Long Crimp barrel Contacts

AWG

Size*

Tip Part Number ***

Pin Contact

Tip Part Number ***

Socket Contact

Handle

Part Number***

22

24

26

323-9510-008

323-9510-009

323-9510-010

323-9510-012

323-9510-013

323-9510-014

204-9500-000

CTA-AB

Assembly Holding

Block

*** To order the SINGLE KIT for the long crimp barrel contact (tip part numbers 323-9510-008 thru

-014, handle and pin and socket extraction tips) please specify CIET-CTA-3.

Part Number: 328-9508-000

Extraction Tools

Kit Part Number

(handle and tip)

Tip Part

Number

Handle Part

Number

Contact

CENTIPIN

Description

CET-P-CTA-2

CET-S-CTA-1

Socket Extraction

Pin Extraction

Tip

070112-0002

070113-0001

324-9502-000

324-9501-000

204-9500-000

Tip

CENTISOCKET

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

67

The Centi Line - .075" Contact Spacing

2D/CTA

2D/CTA CENTI-LOC^TMConnectors Assembly Instructions

The Double Density D/CTA CENTI-LOC Connectors

are highly reliable and simple connectors to use.

There are a few helpful suggestions that will assure

complete satisfaction when followed:

1. The following instructions should be followed.

2. The proper crimp tool and locator (if required)

must be used. These tools have been designed

for use with this product. Substitutions of crimp-

ing equipment may result in connector failure at

the assembly operation.

3. After crimping a contact to a lead it is of vital

importance that the proper tool be used to assure

seating the contact in the insulator in the proper

position. Any substitution of insertion tools may

result in over or under insertion of the contact

which may damage the retention system of the

insulator.

4. The female (socket) side of the connector has

been designed with a controlled float to allow for

ease of mating. To avoid reducing this float or

causing a splaying of the contacts, any unneces-

sary strain caused by clamping the leads too

close to the rear of the connector should be

avoided.

Use of recommended tooling together with proper

assembly techniques will pay dividends in reliability

and reduced costs.

2D Assembly Instructions

WIRE STRIPPING

CONTACT CRIMPING

.100

(2.54)

Using the proper crimp tool and locator, insert the

contact into the locator. Insert the stripped end of the

wire into the contact crimp pot, and crimp the contact to

the wire. Squeeze the handles firmly to insure a proper

crimp (tool will not release if crimping is incomplete).

NOTE: Contact stop must be changed in tool locator

when crimping pin and socket contacts.

Cut the wires to length required and strip .100" of

insulation from the end to be crimped. Check for

cut or broken wires and frayed insulation.

CONTACT INSERTION

2. Using a firm, steady pressure, push the contact into

the cavity until the resilient internal shoulder in the

insulator snaps into the locking groove in the contact.

The shoulder of the tool tip bottoms against the rear

of the insulator, preventing over-insertion. Repeat for

balance of contacts.

1. Place the proper insertion tip in the

insertion/-extraction handle and put the tip over the

wire as shown. The tool tip will butt up against the

crimp pot. Connector must be firmly supported

during both insertion and extraction operations.

CONTACT EXTRACTION

1. For contact extraction, remove the insertion tool

tip and replace it with the proper extraction tool tip.

(The socket tip will fit into the socket, and the pin

tip will slide over the pin bundle). Insert the tool tip

into the contact cavity: (the pin tip will butt up

against the shoulder of the pin contact, and the

socket tip will bottom out in the socket contact.)

2. Apply a firm, steady pressure until the contact is

released from the internal shoulder in the insulator. The

shoulder of the tool tip bottom against the insulator

face to prevent damage to the internal shoulder.

Remove the tool tip and pull the contact from the rear

of the connector. Repeat for the balance of contacts to

be removed.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

68

The Centi Line - .075" Contact Spacing

2D/CTA

CTA Assembly Instructions

INSERTION

2. Position the insertion tool tip on the rear of contact as

shown. The insulation must be pulled back from the crimp

pot approximately 1/32" to allow the tool tip to butt

against the contact crimp pot.

1. Place the connector into the slot in the assembly block

with the arrows on the insulator pointing downward. The

connector will bottom against the internal shoulder in the

groove in the assembly block. Start contact insertion by

placing the crimped contact in the cavity by hard.

.475 (12.06)

MAX.

.275 (6.98)

MAX.

Guide Posts

Polarizing Posts

4. The guide post and polarizing posts are inserted in teh

same manner as the contacts. The guide posts are inserted

into the socket insulator, and the polarizing posts are

inserted into the pin insulartor. The corresponding contact

in the mating insulator must be removed for each.

3. With firm steady pressure, push the contact into the

cavity until the resilient internal shoulder snaps into the

locking groove in the contact. To prevent over insertion,

the tool tip bottoms against the rear of the insulator.

EXTRACTION

2. The pin extraction tool tip is tubular, slides over the pin

bundle and butts against the front shoulder of the pin. The

socket extraction tool is a solid rod that fits into the socket

contact, the external shoulder butts against the contact

socket shoulder.

1. To extract the contacts, place the conector face up in

the assembly block so that the contact to be extracted is

in the end of the block that has a fully slotted opening.

3. Insert the extraction tool into the cavity and apply firm

pressure until the contact is pushed thru the rear of the

connector.

4. Lift the insulator from the groove and pull the contact

out. Repeat for balance of contacts to be removed.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

69

The NANO Line - .025" Contact Spacing

NANO contacts incorporate the highly reli-

able Twist Pin concept, which allows conti-

nuity in very dense areas and under severe

shock and vibration, requiring low engage-

ment and separation forces. Termination

can consist of uninsulated pigtails or insu-

lated wire all pre-harnessed at our factory

to your specifications.

Due to various industry application require-

ments the NANO line is available in several

different configurations, available in strip,

metal shell and plastic, rectangular or cir-

cular configurations with center jackscrew.

Successful applications for NANO connec-

tors are many and varied, from the Air

Force's AIRS program to actual human

implantations in the medical research field.

Specifications

NTP

NDM

NJS

NJSC

• Contact Rating - 1 amp max.

Type

Shell

Single Row

Strip

Metal Shell

Rectangular

Center Jackscrew Center Jackscrew

Circular

• Minimum contact centers - 0.025 (0.64).

• Wire sizes - #32 AWG stranded, #30 AWG solid.

• Contact termination - integral pigtail or multiple indent crimp.

• Contact rentention - fixed via epoxy.

Alum. alloy

2024 T351 per

QQ-A-250 or

6061-T6 per

QQ-A-200

• Contact materials - socket: nickel silver.

pin bundle: precious metal alloy or BeCu.

pin Sleeve: nickel silver or cartridge brass.

nickel plate

Insulator

Phenolic

Polyester

9, 24, 44

Polyester

• Mating/unmating force - 6oz. per contact max.

1-40

Contacts

9, 15, 21, 25

31, 37

27, 72, 266

No. of Contacts

Pin Bundle

Material

- Precious metal per ASTM B477 and ASTM B541, or BeCu per CDA alloy 172 & 102 -

- Nickel silver/ASTM B122, Comp. B-

Socket Sleeve

Material

Pin Sleeve

Material

- Nickel silver per ASTM B122, Comp. B or Cartridge Brass per CDA alloy 260 -

Test Data

The table below summarizes the results of key tests

performed in accordance with MIL-STD-202, where

applicable. Data is applicable to standard connec-

tor with standard terminations. Variations may

affect this data, so please consult the factory for

further information on your requirements.

Test

Method

Criteria of Acceptance

Dielectric Withstanding

Voltage

Method 301:

350 VAC at sea level

100 VAC at 70,000' altitude

No breakdown

Insulation Resistance

Thermal Shock

Method 302, Condition A

5,000 megohms minium

No physical damage

Method 107, Condition B:

-65˚C to +125˚C

Physical Shock

Method 213, Condition I:

100 G's, 3-axes, 6 millisecond No loss of continuity > 1 µ sec

duration sawtooth pluse

No physical damge

Vibration

Durability

Method 204, Condition D:

15 G's, 10-2,000 Hz, 12 hours No loss of continuity > 1 µ sec

No physical damge

500 cycles of mating and

unmating, 500 CPH max.

No mechanical or electrical defect

Insulation resistance > 100 megohms

Moisture Resistance

Salt Spray

Method 106, omit 7b

Method 101, Condition B:

48 hours

Shall be capable of mating and unmating,

and meet contact resistance requirements

Contact Resistance

Method 307:

With gold plated Be-

30 milliohms maximum

}

Cu Nanopin contact.

With precious metal

alloy Nanopin contact.

At 1 amp

At 100 milliamps

60 milliohms maximum

80 milliohms maximum

Contact Retention

-

3 lb. minimum axial load

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

70

Strip Connectors - .025" Contact Spacing

NT

How to Order - NT

NT

P

2

40

S

H * * *

R

RoHS COMPLIANCE

SERIES

INSULATOR MATERIAL

CONTACT LOCATION

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

MODIFICATION CODE

SERIES

TERMINATION MODIFICATION

Nano Strip

CONTACT ARRANGEMENTS

40 Maximum - .025 (0.64) centers

20 Maximum - .050 (1.27) centers

L - Solid uninsulated wire

T - One piece contact/lead

H - Insulated harness wire

INSULATOR MATERIAL

P - Phenolic

CONTACT TYPE

P - Pin (Plug)

CONTACT LOCATION

MODIFICATION CODE

For termination code, see NJS section,

page 73.

1 - Contacts on .025 (0.64) centers

2 - Contacts on .050 (1.27) centers

S - Socket (Receptacle)

Dimensions

NTP

.055

(1.40)

MAX.

.055

(1.40)

MAX.

.055

(1.40)

MAX.

B

.025 (0.64) TYP.

A

.160

(4.06)

MAX.

.220

(5.59)

MAX.

.080

(2.03)

Plug - "H" and "L"

Termination Types

Plug - "T"

Receptacle - "H", "L", and "T"

Termination Types

PartꢀNumber

A

B

PartꢀNumber

A

B

PartꢀNumber

A

B

PartꢀNumber

A

B

byꢀInsulatorꢀSize

Ref±

± ±010ꢀ 0±25ꢁ byꢀInsulatorꢀSize

Ref±

± ±010ꢀ 0±25ꢁ

.300 (7.62)

.325 (8.26)

.350 (8.89)

.375 (9.53)

.400 (10.16)

.425 (10.80)

byꢀInsulatorꢀSize

Ref±

± ±010ꢀ 0±25ꢁ

byꢀInsulatorꢀSize

Ref±

± ±010ꢀ 0±25ꢁ

.800 (20.32)

.825 (20.96)

.850 (21.59)

.875 (22.23)

.900 (22.86)

.925 (23.50)

.950 (24.13)

.975 (24.77)

NTPI-1*-**

NTPI-2*-**

NTPI-3*-**

NTPI-4*-**

NTPI-5*-**

NTPI-6*-**

NTPI-7*-**

NTPI-8*-**

NTPI-9*-**

NTPI-10*-**

-

.050 (1.27)

.075 (1.91)

.100 (2.54)

.125 (3.18)

.150 (3.81)

.175 (4.45)

.200 (5.08)

.225 (5.72)

.250 (6.35)

.275 (6.99)

NTPI-11*-**

NTPI-12*-**

NTPI-13*-**

NTPI-14*-**

NTPI-15*-**

NTPI-16*-**

NTPI-17*-**

NTPI-18*-**

NTPI-19*-**

NTPI-20*-**

.250 (6.35)

.275 (6.99)

.300 (7.62)

.325 (8.26)

.350 (8.89)

.375 (9.53)

NTPI-21*-**

NTPI-22*-**

NTPI-23*-**

NTPI-24*-**

NTPI-25*-**

NTPI-26*-**

NTPI-27*-**

NTPI-28*-**

NTPI-29*-**

NTPI-30*-**

.500 (12.70)

.525 (13.34)

.550 (13.97)

.575 (14.61)

.600 (15.24)

.625 (15.88)

.650 (16.51)

.675 (17.15)

.700 (17.78)

.725 (18.42)

.550 (13.97)

.575 (14.61)

.600 (15.24)

.625 (15.88)

.650 (16.51)

.675 (17.15)

.700 (17.78)

.725 (18.42)

.750 (19.05)

.775 (19.69)

NTPI-31*-**

NTPI-32*-**

NTPI-33*-**

NTPI-34*-**

NTPI-35*-**

NTPI-36*-**

NTPI-37*-**

NTPI-38*-**

NTPI-39*-**

NTPI-40*-**

.750 (19.05)

.775 (19.69)

.800 (20.32)

.825 (20.96)

.850 (21.59)

.875 (22.23)

.900 (22.86)

.925 (23.50)

.025 (0.64)

.050 (1.27)

.075 (1.91)

.100 (2.54)

.125 (3.18)

.150 (3.81)

.175 (4.45)

.200 (5.08)

.225 (5.72)

.400 (10.16) .450 (11.43)

.425 (10.80) .475 (12.07)

.450 (11.43) .500 (12.70)

.475 (12.07) .525 (13.34)

.950 (24.13) 1.000 (25.40)

.975 (24.77) 1.025 (26.04)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

71

NANO D Metal Shell - .025" Contact Spacing

NDM

How to Order - NDM

NDM- 9

P

T

* *

R

RoHS COMPLIANCE

SERIES

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

MODIFICATION CODE

SERIES

TERMINATION TYPE

NDM - NANO D Metal Shell

H = Insulated harness wire

L = Solid copper

CONTACT ARRANGEMENTS

9, 15, 21, 25, 31, 37

T = One piece contact/lead

MODIFICATION CODE

To specifiy lead lengths, type and mechanical

CONTACT TYPE

P = Pin (Plug)

modifications consult customer service.

S = Socket (Receptacle)

Dimensions

NDM

D

.083 +_ .004

(2.11 +_ 0.10)

DIA.TYP.

C

.025 (0.64) TYP.

.150 (3.81) MAX.

A

B

.130

(3.30) MAX

.004 +_ .004

.175 (4.44)

MAX.

(1.12 +_ 0.10)

Plug

D

.083 +_ .004

C

(2.11 +_ 0.10)

DIA.TYP.

.025 (0.64) TYP.

.150 (3.81) MAX.

A

B

.205 (5.21)

MAX.

.051 +_ .004

(1.30 +_ 0.10)

.155 (3.94) MAX.

Receptacle

Plug

B

Ref.

Receptacle

B

Ref.

Part Number

By Shell Size

A

Ref.

C

D

Max.

.ꢀꢀ0 ꢁꢀ.ꢂ13

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

NDM-9P*/S*

NDM-15P*/S*

NDM-21P*/S*

NDM-25P*/S8

NDM-31P*/S*

NDM-37P*/S*

.200 (5.08)

.317 (8.05)

.467 (11.86)

.617 (15.67)

.717 (18.21)

.867 (22.02)

1.017 (25.83)

.380 (9.65)

.530 (13.46)

.680 (17.27)

.780 (19.81)

.930 (23.62)

1.080 (27.43)

.725 (18.42)

.875 (22.23)

1.025 (26.04)

1.125 (28.58)

1.275 (32.39)

1.425 (36.20)

.350 (8.89)

.500 (12.7)

.600 (15.24)

.750 (19.05)

.900 (22.86)

Consult customer service for availability of other sizes.

Panel Mounting Dimensions

B

C

.086 .00ꢀ

+ ±..5ꢀ .±13ꢁ + ±..5ꢀ .±13ꢁ

- ±...ꢀ .±..ꢁ - ±...ꢀ .±..ꢁ

A

(2.18 0.10)

DIA. TYP

.032 (0.81) R TYP.

Size ± ±..5ꢀ .±13ꢁ

9

15

21

25

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

.261 (6.63)

.411 (10.44)

.561 (14.25)

.661 (16.79)

.811 (20.60)

.961 (24.41)

.095 (2.41)

C

B

31 1.115 (28.32)

37 1.265 (32.13)

A

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

72

Center Jackscrew - .030" Contact Spacing

NJS

How to Order - NJS

NJS - 24

P

H * * *

R

RoHS COMPLIANCE

SERIES

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODE

TERMINATION CODE*

SERIES

NJS - Nano center jackscrew rectangular (9,

(H) 001 = 18" #32 AWG 7/40 strd. Type

"ET" Teflon per MIL-W-16878/6,

color yellow.

24, 44)

NJSC - Nano center jackscrew circular (27, 72

266)

(H) 003 = 18" #32 AWG 7/40 strd. Type

"ET" Teflon per MIL-W-16878/6

color coded to MIL-STD-681, Sys-

tem 1.

CONTACT ARRANGEMENTS

9, 24, 27, 44, 72, 266

CONTACT TYPE

P = Pin (Plug)

(L) 1 = 1/2" uninsulated solid #30 AWG

gold plated copper.

S = Socket (Receptacle)

(L) 2 = 1" uninsulated solid #30 AWG gold

plated copper

TERMINATION TYPE

(T)* = Consult customer service

H = Insulated harness wire

L = Solid uninsulated wire

T = One piece contact/Lead

* See Termination Codes shown below for additional length modification codes.

Standard Wire Termination Codes

The following termination codes are listed for your information. For additional codes please refer to Appendix on page 80 and 82. All wire lengths ae minimum.

Harness Type (H)

#32 AWG, 7/40 stranded, Type "ET" per MIL-W-16878/6

Solid Uninsulated Type (L)

#32 AWG gold plated copper.

Length

3 (76.2)

All Yellow

H 020

H 019

H 026

H 029

H 028

H 001

H 038

Color Coded

H 027

Length

24 (609.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.8)

120 (3048.0)

All Yellow

H 009

Color Coded

H 004

Code

L61

L56

L57

L39

L58

L1

Length

Code

L14

L2

Length

.125 (3.18)

.150 (3.81)

.190 (4.83)

.250 (6.35)

.375 (9.53)

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

6 (152.4)

8 (203.2)

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

H 016

H 010

H 005

H 034

H 011

H 006

L7

H 025

H 013

H 048

L6

H 002

H 017

H 046

L16

L10

H 003

H 042

H 041

H 023

Center Jackscrew/Rectangular

NJS-9 & NJS-24

1

9

5

4

B

D

8

0-80 UNF-2B

THREADED INSERT

C

A

Face View Pin Insert

Receptacle Side View

B

Plug Side View

A

C

D

Part Number

Max.

.ꢀꢀ0 ꢁꢀ.ꢂ13

NJS-9P*

NJS-9S*

NJS-24P*

NJS-24S*

NJSC-266

NJSC-72

NJSC-44

NJSC-27

.255 (6.48)

.165 (4.19)

.138 (3.51)

.116 (2.95)

.255 (6.48)

.435 (11.05)

.165 (4.19)

.078 (1.98)

.138 (3.51)

.078 (1.98)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

73

Center Jackscrew - .030" Contact Spacing

NJS

Contacts

.060 (1.52) MAX.

EPOXY WICKING

.011

(.28)

REF.

SOCKET

CONTACT

.011

(.28)

REF.

.062 (1.57)

0.90 .010

REF.

PIN CONTACT

WITH THRU-BUNDLE

PIGTAIL

(2.29 0.25)

GUIDE POST

(OPTIONAL WITH LOSS OF CONTACT

.100 (2.54) MAX

EPOXY

WICKING

EPOXY RETAINING

CONTACT INSULATOR

Socket View

Pin View

(Thru-Bundle Contact)

Pin View

(Crimp-Type Contact

NOTE: Guide posts can be installed in any contaact cavity for polarization purposes.

Connector Saver

NJS-9P & S

.128

(3.25)

REF.

#0-80 UNF-2A

GUIDE POST

CAVITY

(open)

.062

(1.57)

REF.

Part Number: NJS97294-835

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

74

Custom Cable Assemblies

Our product portfolio has been devel-

ITT manufactures complete cable

oped and is continuing to be developed

to provide our customers with new and

better technologies that offer superior

system level performance while lowering

assemblies worldwide at locations in

Santa Ana California, Basingstoke UK,

and Nogales Mexico. The various engi-

neering and manufacturing centers of

overall system level costs. Our corporate excellence are utilized to best fit various

culture in Six Sigma Methodologies

allows ITT to continuously challenge our

Engineering and Scientific professionals

to develop new processes and technolo-

gies in Material Science, Automation,

and Testing to ensure that our cus-

tomers get the best cost effective harsh

environment cable assemblies from ITT.

You should expect no less from an

Industry leader.

cable assembly and product platform

specialties to provide our customers

with the most cost effective solutions.

The following paragraphs highlight sev-

eral examples of interconnect cable

assemblies for various Market segments

that ITT services. These examples rep-

resent just a snapshot of the many cus-

tom micro interconnects or cable

assemblies that ITT can provide the

industry.

Dynamic Custom Cable Assemblies

for Harsh Environments

ITT has been a world leader in designing

and manufacturing harsh environment

micro interconnects and cable assem-

blies for over fifty years. In addition, our

historical product and assembly expert-

ise dates back over 85 years to the

founding of the original ITT Cannon.

Today, we provide complete turnkey

cable assemblies for all of ITT’s micro

connector portfolio including: Cent Line

Interconnects, MDM series, M83513

Series, MEB series, MDM Mixed Signal

Packages, MT strip interconnects, micro

miniature circular MIK series, and our

high density Nano Connectors. Our

cable assembly expertise has allowed

ITT to develop innovative Six Sigma

driven manufacturing processes that

allows our customers a full breadth of

tight pitch cable assemblies in 0.100,

0.075, 0.050, and 0.025 contact spacing.

Space Grade Micro Interconnect

cable assemblies

ITT has been deciding and manufactur-

ing Space Rated interconnects and

cable assemblies since the beginning of

the US space Program in the mid 20th

century. Prior to the MIL DTL M83513

specification ITT had been qualified for

all NASA GSFC performance and speci-

fication requirements, on numerous

satellite and space launch systems. ITT’s

Engineering and Product teams have

over 200 years of combined experience

in design, manufacture, and test of

Space flight interconnects and cable

assemblies. Our expertise in material

science, manufacturing processes, out

gassing, testing and screening, Magnetic

permeability, and Cryogenics has given

ITT a tremendous understanding in

developing high reliability space system

interconnects and cable assemblies .

Custom Micro D and M83513

Interconnect cable

assemblies

As one of the original developers of the

Micro Interconnect technology, ITT has

been an industry innovator in providing

complete harsh environment cable

assemblies and stretching the state of

art in such areas as: Filtering, Hermetics,

moisture barriers, High Speed and

Mixed Signal Packages, EMI suppres-

sion, and multiple cable types. Most of

ITT’s custom cable assemblies utilize our

standard Micro pin contact system.

However, ITT does use other types of

contact systems when manufacturing

mixed signal interconnect systems

where signal speed and power contacts

will be incorporated into a complete

cable assembly solution.

ITT’s harsh environment interconnects

and cable assemblies are used in the

most demanding applications and envi-

ronments. You will find our products in

such markets as: Aerospace, Defense

Electronics, Geophysical Exploration,

High Speed Computer Networking,

Industrial Automation, Medical

All of ITT’s Space rated micro intercon-

nect assemblies utilize ITT QPL M83513

connectors. These cable assemblies are

tested to meet the most stringent per-

formance requirements as outlined by

numerous NASA GSFC specifications.

Additional performance and test require-

ments beyond existing NASA GSFC

guidelines can always be tailored so that

additional custom test programs can be

incorporated.

Electronics, Satellite and Space

Communications, and

Telecommunications. Our complete

interconnect solutions have flown on

every major Aircraft and Space platform

since the 1940’s. In fact, many aircraft

mechanics still refer to ITT Cannon con-

nector and cable assemblies as the

Aviation standard.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

75

Custom Cable Assemblies

High Temperature Harsh Environment

Interconnect Assemblies

Medical Electronics Cable

Assemblies:

The proliferation of deep water drilling

As microminiaturization continues in the

prospects in the world’s oceans has cre- medical technologies field so the contri-

ated increased performance demands

for micro miniature interconnects and

cable assemblies for down hole oil field

exploration. Not only are new fields

being discovered in ocean depths

greater than five miles but the wells

themselves are being drilled deeper into

butions of ITT’s micro interconnect

devices and assemblies. Our custom

medical assemblies are utilized in such

applications as: patient monitoring, diag-

nostics, imaging, and disposable sys-

tems. These types of application have

been well served by ITT’s Nano, MT strip

the earths crust, sometimes to depths of and MIKQ series of interconnects. In

30,000 feet. Thus, the temperature addition to there specific connector

extremes in excess of 200 degrees C are types, ITT is well experienced in the

becoming the norm. In this the most

demanding of environments, ITT has

been designing and manufacturing such

micro interconnect connector and cable

assemblies for over forty years. Again

our engineering and manufacturing

expertise in the material science of

Liquid Crystal Polymer (LCP), flourosili-

cones, plating, metals, and high temper-

ature epoxies is leading ITT to develop

high temperature performance beyond

200 degree C operating temperatures.

careful selection of medical grade cables

and termination materials to ensure fully

compliant med. cal cable assemblies.

Shown below is an example of ITT’s

MIKQ high strength plastic circular

quick disconnect connector cable

assembly for a medical application.

Pictured below is an ITT high tempera-

ture nano interconnect assembly. ITT is

developing new products around this

nano interconnect platform that will not

only increase signal density but will

include new material’s and processes for

higher temperature applications.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

76

Flex Circuit Cable Assembly

Terminating to Flexible Circuits

Diagram 1 shows details of the pad spacing and the

suggested amount of material to be left between the

end of the pad A and the edge of the ﬂex B.

0,51 (.020)

A

B

2,16 (.085)

1,27 (.050)

0,51 (.020)

COVERLAY

EXTENDS

INTO

Ideally, for a low profile and a neat finish, it is

best to terminate flexible circuits in line with

the contacts. Since most Microminiature

connectors have contacts set into two or

POTTING

Diagram 2 illustrates how the connector is

preparedwithshortpigtailsandaspecialﬁrst

potwhichjustcapturesthecontacts.Theﬁnal

back potting for strength is controlled by our

standard 7,00 (.275) potting ﬁxtures.

three rows, termination is a simple process.

6,99

(.275)

The diagrams opposite are basically a design

guide for pad arrangements, to suit MDM con-

nectors in particular and to ensure the circuits

enter the potting well. The length of the pad is

optional but of course it is important to pro-

vide enough coverlay, especially at the edges

of the circuit, to avoid de-lamination. We sug-

gest at least 0,51 mm (.020 inches). Our stan-

dard potting shrouds provide support to the

circuit with a dimension of 7,00 mm (.275

inches) from the rear of the flange.

4,98

(.196)

2,00 (.079)/1,53 (060)

FIRST POTTING LEVEL

TO RETAIN CONTACTS

Please consult Customer Service for specific

flex circuit assembly design considerations

and requirements.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

77

Custom Back Shells

Custom Back Shell Systems

ITT has designed numerous back shell solutions for

micro miniature interconnects for many harsh envi-

ronment applications. Although ITT does not offer a

standard back shell portfolio today, we can design

and manufacture a range of back fittings for our

MDM connector products depending on the cus-

tomer requirements. Utilizing one of our partnership

relationships, one of our UK based micro product

groups of ITT can provide can provide custom

designs utilizing proven banded systems in which

the braid is captivated over a chimney style outlet.

These types of back shell systems are available in

different material finishes and sizes and can be pro-

vided with special process termination methods. In

addition, ITT has developed a method of riveting the

back fitting to the shell within the jacking area. This

option guarantees 360 degree shielding effective-

ness even when jackscrews or jacking posts are not

being used.

In addition to the above ITT can provide special

back potting style termination systems for environ-

mental protection and strain relief. These types of a

back shell style system are typically filled with epoxy

or other encapsulating materials to provide a robust

and effective back shell system.

Where a conduit system is preferred such as for test

box environments in field locations, back fittings and

a fully screened weatherproof convoluted trunking

can be provided

Sealing Gaskets

We have received requests for gasket materials to seal the MDM connectors into various enclosures. We recommend that you consider wider flanged connectors

together with a low cost conductive gasket to provide an adequate surface area. This combination will give you IP-66 sealing with good EMC compliance. The follow-

ing dimensions for gaskets and flange dimensions are regarded as the minimum that you should consider.

Conductive elastomers generally offer a superior shielding performance when compared with alternatives as in table below.

Gasket Type

Neoprene (wire

impregnated)

Silicone (wire

impregnated)

Silicone

(oriented wire)

Neoprene

(fabric wrap)

Metallic

finger stock

Metallic fibres

Conductive

silicone rubber

Shielding performance

Temperature range

IP sealing

S

P

G

S

P

S

G

P

G

S

P

S

G

S

G

S

G

S

G

S

G

P

S

G

P

G

P

S

P

G

S

G

Compression force

Compression range

Surface texture

Compression set

Re-usability

G

* Neoprene is a trademark of Dupont P = Poor

S = Satisfactory

G = Good

Conductive rubber gaskets can be loaded with many different metallic fillers but the choice of material is dependent upon a number of factors such as level of con-

ductivity, shielding effectiveness, galvanic compatibility and cost.

Galvanic Corrosion can occur when two dissimilar metals are in contact with one another in the presence of an electrolyte. The type of gasket material has to be

assessed because of the use of metallic fillers. Many applications are dry indoor environments where corrosion is not a major concern. However, for external use,

particularly marine, it is recommended that consideration be given to compatibility. The table on the next page is a summary.

Enclosure Material

aluminum alloys

Magnesium alloys

Stainless steel

Copper alloys

Silver/Nickel

Silver/Copper

Silver/aluminum

Inert aluminum

Silver/Glass

Silver

Nickel/Graphite

Nickel

L

X

l

L

l

L

l

L

l

L

Cadmium plating

Tin plating

X

l

L

l

L

l

L

l

L

l

L

Nickel plating

l

L

Chromium plating

Silver plating

L

Zinc & galvanise plating

Titanium

X

l

L

l

L

l

L

l

L

L = good

l = Satisfactory

X = Not recommended

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

78

Appendix

“L” Code Chart

SORTED BY LENGTH

Wire Length, IN.

SORTED BY CODE

Wire Length, IN.

Decimal

Fraction

Code

Decimal

Fraction

0.080

0.094

0.110

0.125

0.140

0.150

0.171

0.187

0.190

0.210

0.250

0.312

0.375

0.380

0.500

0.625

0.750

1.000

1.500

2.000

2.250

2.500

3.000

3.500

4.000

4.500

5.000

6.000

7.000

8.000

9.000

10.000

11.500

12.000

15.000

18.000

20.000

L63

L62

L65

L61

L67

L56

L66

L17

L57

L59

L39

L60

L58

L64

L1

L2

0.500

1.000

6.000

12.000

20.000

2.000

1.500

7.000

5.000

3.000

4.000

0.625

10.000

0.750

3.500

2.500

0.187

8.000

2.250

4.500

0.250

9.000

15.000

11.500

18.000

0.150

0.190

0.375

0.210

0.312

.0125

0.094

0.080

0.380

0.110

0.171

0.140

1/2

3/32

1/8

L3

L4

L5

L6

L7

3/16

L8

L9

L10

L11

L12

L13

L14

L15

L16

L17

L18

L25

L28

L39

L45

L46

L52

L55

L56

L57

L58

L59

L60

L61

L62

L63

L64

L65

L66

L67

1/4

3/8

5/8

3/4

1/2

5/8

3/4

L12

L4

3/16

1/4

L2

L7

L6

L25

L16

L10

L15

L11

L28

L9

L3

3/8

L8

L18

L45

L13

L52

L4

5/16

1/8

3/32

L46

L55

L5

#25AWG, SOLID COPPER WIRE PER QQ-W-343,

TYPE “S”, GOLD PLATED PER MIL-G-45204, TYPE

II GRADE C OR D, CLASS 1 (50 MICROINCHES

MINIMUM)

Nano “L” Code Charts on page 80.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

79

Appendix

“L” Code Chart (for Nano products only)

SORTED BY LENGTH

Wire Length, IN.

SORTED BY CODE

Wire Length, IN.

Decimal

Fraction

Code

Decimal

0.500

Fraction

0.080

0.094

0.110

0.125

0.140

0.150

0.171

0.187

0.190

0.210

0.250

0.312

0.375

0.380

0.500

0.625

0.750

1.000

1.500

2.000

2.250

2.500

3.000

3.500

4.000

4.500

5.000

6.000

7.000

8.000

9.000

10.000

11.500

12.000

15.000

18.000

20.000

L63

L62

L65

L61

L67

L56

L66

L17

L57

L59

L39

L60

L58

L64

L1

1/2

3/32

1/8

L2

1.000

6.000

12.000

20.000

2.000

1.500

7.000

5.000

3.000

4.000

0.625

10.000

0.750

3.500

2.500

0.187

8.000

2.250

4.500

0.250

9.000

15.000

11.500

18.000

0.150

0.190

0.375

0.210

0.312

.0125

0.094

0.080

0.380

0.110

0.171

0.140

L3

L4

L5

L6

L7

3/16

L8

L9

L10

L11

L12

L13

L14

L15

L16

L17

L18

L25

L28

L39

L45

L46

L52

L55

L56

L57

L58

L59

L60

L61

L62

L63

L64

L65

L66

L67

1/4

3/8

5/8

3/4

1/2

5/8

3/4

L12

L4

3/16

1/4

L2

L7

L6

L25

L16

L10

L15

L11

L28

L9

L3

3/8

L8

L18

L45

L13

L52

L4

5/16

1/8

3/32

L46

L55

L5

#30AWG, SOLID COPPER WIRE PER QQ-W-343,

TYPE “S”, GOLD PLATED PER MIL-G-45204, TYPE

II GRADE C OR D, CLASS 1 (50 MICROINCHES

MINIMUM)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

80

Appendix

“H” Code Charts

16878/4

22759/11-26

22759/33-26

Wire, Electrical, Polyetrafluorethylene (PTFE)

Insulated, 200 Degrees C, 600 Volts, Extruded

Insulation

Wire, Electrical, Fluoropolymer-Insulated, Extruded

TFE, Silver-Coated Copper Conductor, 600 Volt

Wire, Electrical, Fluoropolymer-Insulated, Crosslinked

Modified, ETFE, Lightweight, Silver-Coated, High-

Strength Copper Alloy 200 Degrees C, 600 Volt

10 Color

Repeat

Length

Yellow

White

System 1

Length

White

System 1

10 Color

Repeat

1

030

024

020

–

C30

C24

C20

C33

C31

047

C26

C15

C29

008

C39

C36

044

C38

C55

045

C10

C18

058

C37

021

C13

C40

C14

059

C32

C22

C35

C42

C43

A30

A24

027

033

A31

016

034

A15

025

002

A39

A36

003

023

A55

004

005

A18

006

A37

A12

048

A40

056

046

A32

A22

A35

041

A43

1

2

G30

G24

G20

G33

G31

065

G26

G15

G29

066

G39

G36

067

G38

G55

068

G10

G18

069

G37

G12

070

G40

G14

071

G32

G22

G35

G42

G43

Y30

Y24

Y20

Y33

Y31

Y19

Y26

Y15

Y29

Y28

Y39

Y36

Y01

Y38

Y55

Y09

Y10

Y18

Y11

Y37

Y12

Y13

Y40

Y14

Y17

Y32

Y22

Y35

Y42

Y43

H30

H24

H20

H33

H31

072

H26

H15

H29

073

H39

H36

074

H38

H55

075

H10

H18

076

H37

H12

077

H40

H14

078

H32

H22

H35

H42

H43

Length

White

System 1

2

1

2

V30

V24

V20

V33

V31

V19

V26

V15

V29

V28

V39

V36

V01

V38

V55

V09

V10

V18

V11

V37

V12

V13

V40

V14

V17

V32

V22

V35

V42

V43

W30

W24

W20

W33

W31

W19

W26

W15

W29

W28

W39

W36

W01

W38

W55

W09

W10

W18

W11

W37

W12

W13

W40

W14

W17

W32

W22

W35

W42

W43

X30

X24

X20

X33

X31

X19

X26

X15

X29

X28

X39

X36

X01

X38

X55

X09

X10

X18

X11

X37

X12

X13

X40

X14

X17

X32

X22

X35

X42

X43

3

4

3

5

031

019

026

015

029

028

039

036

001

038

055

009

010

018

011

037

012

013

040

014

017

032

022

035

042

043

5

4

6

5

8

6

9

8

10

12

16

17

18

20

21

24

30

35

36

40

42

48

50

60

72

80

92

96

120

180

10

12

16

17

18

20

21

24

30

35

36

40

42

48

50

60

72

80

92

96

120

180

9

10

12

16

17

18

20

21

24

30

35

36

40

42

48

50

60

72

80

92

96

120

180

Nano “H” Code Charts on page 82.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

81

Appendix

“H” Code Charts (for Nano products only)

MIL-W-16878/6

Wire, Electrical, Polyetrafluorethylene (PTFE)

Insulated, 200 Degrees C, 250 Volts, Extruded

Insulation

Length

Yellow

White

System 1

1

2

030

024

020

–

C30

C24

C20

C33

C31

047

C26

C15

C29

008

C39

C36

044

C38

C55

045

C10

C18

058

C37

021

C13

C40

C14

059

C32

C22

C35

C42

C43

A30

A24

027

033

A31

016

034

A15

025

002

A39

A36

003

023

A55

004

005

A18

006

A37

A12

048

A40

056

046

A32

A22

A35

041

A43

3

4

5

031

019

026

015

029

028

039

036

001

038

055

009

010

018

011

037

012

013

040

014

017

032

022

035

042

043

6

8

9

10

12

16

17

18

20

21

24

30

35

36

40

42

48

50

60

72

80

92

96

120

180

www.ittcannon.com

82

Appendix

MIL-STD-681 Wire Color Code

Reference Data

PIN MIL-STD-681 Base

First

Stripe

Second

Stripe

Third

Stripe

PIN MIL-STD-681 Base

First

Stripe

Second

Stripe

Third

Stripe

No.

Color

No.

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

No.

Color

WHT

1*

0

BLK

957

GRN

BLU

VIO

GRY

VIO

2*

1

BRN

RED

ORN

YEL

958

3*

2

967

4*

3

968

GRY

BRN

RED

ORN

YEL

5*

4

978

6*

5

GRN

BLU

9012

9013

9014

9015

9016

9017

9018

9023

9024

9025

9026

9027

9028

9034

9035

9036

9037

9038

9045

9046

9047

9048

9056

9057

9058

9067

9068

9078

9123

9124

9125

9126

9127

9128

9134

9135

9136

9137

9138

9145

9146

9147

9148

9156

9157

BLK

BRN

RED

ORN

YEL

GRN

BLU

VIO

7*

6

8*

7

VIO

9*

8

GRY

WHT

10*

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

9

90

BLK

BRN

RED

ORN

YEL

91

GRY

ORN

YEL

GRN

BLU

VIO

92

93

94

95

GRN

BLU

VIO

96

97

GRY

YEL

GRN

BLU

VIO

98

GRY

BLK

BRN

RED

ORN

YEL

901

902

903

904

905

906

907

908

912

913

914

915

916

917

918

923

924

925

926

927

928

934

935

936

937

938

945

946

947

948

956

BRN

RED

ORN

YEL

GRN

BLU

VIO

GRY

GRN

BLU

VIO

YEL

GRY

RED

ORN

YEL

GRN

BLU

VIO

YEL

GRY

BLU

VIO

GRN

BLU

VIO

GRY

VIO

GRY

ORN

YEL

GRN

BLU

VIO

GRY

ORN

YEL

GRN

BLU

VIO

RED

ORN

YEL

GRY

YEL

GRN

BLU

VIO

GRY

YEL

GRN

BLU

VIO

GRY

GRN

BLU

VIO

GRY

GRN

BLU

VIO

YEL

GRY

BLU

VIO

YEL

GRY

BLU

GRN

* 10 colors repeat is the standard wire color code for 83513-Style connectors.

www.ittcannon.com

83

Terminology

Adhesive dispensing: a computer-controlled machine automatically dispenses epoxy adhesive.

Backmolding: this term refers to the process of transfer-molding epoxy performs into a old. The epoxy is heated and pressurized, much like

conventional plastic molding.

Backpotting: the application of epoxy to connector wire terminations for strain relief and sealing. Epoxy is dispensed with pneumatic

syringes. Standard Micro products have built-in potting wells to contain the epoxy, but optional potting in custom configurations is

accomplished with inexpensive molds.

Brady labels: wraparound adhesive labels for multi-conductor cable.

Breakout: the area where one or more cables are joined together. A breakout frequently requires splices and extra strain relief such as cable

ties or tubing.

Electrical testing: Hi-pot, insulation resistance, and continuity testing are standard tests for cable assemblies.

Etching: etching is a chemical process to prepare certain types of Teflon insulated wire for potting. Without etching, the epoxy will not bond

properly.

Expando: braided sleeving used to protect a wire bundle. The simplest and least expensive method of jacketing a cable, expando tubing is

made of abrasion-resistant nylon or other materials. The ends of the tubing are usually encapsulated in epoxy.

Header: a general term for any printed circuit board mounted connector used as an I/O port.

Hot stamping: insulated wire is imprinted with identification numbers or text.

Hot-stamped heat shrink tubing: used for multi-conductor cables, heat shrink tubing is impression stamped, then installed on the cable and

shrunk.

Ink-jet marking: dots of ink are sprayed through a stationary nozzle onto a part moving on a conveyer. Ink jet marking is now standard.

Ink-stamping: the traditional method of placing metal type in a marking machine which is inked with a roller. The metal type transfers the ink

to a rubber pad, and the part is pressed onto the pad. Oven curing is required.

Jumper Cable: this term usually applies to a short cable assembly that plugs into a printed circuit board one one end, with the other end

mounted in an I/O panel.

Lacing: the process of tying individual wires together into bundles. Special lacing tape is used.

Laser stripping: insulation is removed from the wire by using a special laser stripping machine. Typically used on flat cable.

Mass-termination: simultaneous termination of multiple contacts. Normally associated with IDC termination, mass termination is also used on

micropins in a special multi-contact crimp tool.

Pigtail: a single-ended cable assembly having one connector on one end and unterminated wire on the other end.

Potting: the application of various adhesives to a connector. Potting encapsulates the wires or terminals, providing environmental sealing and

strain relief.

Silkscreening: Ink is transferred through a screen.

Stripping: insulation is removed from wire ends on automatic cut and strip equipment.

Thermal Shock: a conditioning environmental test that cycles a part repeatedly through a specified temperature range. Thermal shock is fre-

quently performed prior to pressure testing.

Tinning: the application of molten solder to connector terminals. Micro products are tinned on a fully automatic machine with cleaning, pre-

heating and inert gas tinning. Pre-tinned leads ensure excellent solderabillity.

Wire marking: individual numbered adhesive tags are attached to each wire.

Wire striping: insulated wire from #24 thru #28 AWG is striped with colors for circuit identification.

Wiring fixtures: flat wiring boards or more complicated three-dimensional fixtures are required for many multi-branched cable harnesses.

Mating connectors are fixtured in the exact position of the end use equipment, and the cable assembly is built on the fixture.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

84

Product Safety Information

THIS NOTE MUST BE READ IN CON-

JUNCTION WITH THE PRODUCT DATA

3. HANDLING

Care must be taken to avoid damage

(iii) Other important information

Cannon continuously endeavors to improve

their products. Therefore, Cannon products

may deviate from the description, technical

data and shape as shown in this catalog and

data sheets.

SHEET/CATALOG.

FAILURE

TO

to any component parts of electrical connec-

tors during installation and use. Although

there are normally no sharp edges, care

must be taken when handling certain compo-

nents to avoid injury to fingers. Electrical

connectors may be damaged in transit to the

customers, and damage may result in cre-

ation of hazards. Products should therefore

be examined prior to installation/use and

rejected if found to be damaged.

OBSERVE THE ADVICE IN THIS INFOR-

MATION SHEET AND THE OPERATING

CONDITIONS SPECIFIED IN THE PROD-

UCT DATA SHEET/ CATALOG COULD

RESULT IN HAZARDOUS SITUATIONS.

“Engineered for life” is a registered trade-

trademarks or registered trademarks are

property of their respective owners. All data

subject to change without notice.

1. MATERIAL CONTENT AND PHYSICAL

FORM

Electrical connectors do not usually contain

hazardous materials. They contain conduct-

ing and non-conducting materials and can be

divided into two groups.

4. DISPOSAL

Incineration of certain materials may release

a) Printed circuit types and low cost audio

types which employ all plastic insulators and

casings.

noxious or even toxic fumes.

5. APPLICATION

b) Rugged, Fire Barrier and High Reliability

types with metal casings and either natural

rubber, synthetic rubber, plastic or glass

insulating materials. Contact materials vary

with type of connector and also application

and are usually manufactured from either:

Copper, copper alloys, nickel, alumel,

chromel or steel. In special applications,

other alloys may be specified.

Connectors with exposed contacts should

not be selected for use on the current supply

side of an electrical circuit, because an elec-

tric shock could result from touching exposed

contacts on an unmated connector. Voltages

in excess of 30 V ac or 42.5 V dc are poten-

tially hazardous and care should be taken to

ensure that such voltages cannot be trans-

mitted in any way to exposed metal parts of

the connector body. The connector and

wiring should be checked, before making

live, to have no damage to metal parts or

insulators, no solder blobs, loose strands,

conducting lubricants, swarf, or any other

undesired conducting particles. Circuit resist-

ance and continuity check should be made to

make certain that there are no high resist-

ance joints or spurious conducting paths.

Always use the correct application tools as

specified in the Data Sheet/Catalog. Do not

permit untrained personnel to wire, assemble

or tamper with connectors. For operation

voltage please see appropriate national reg-

ulations.

2. FIRE CHARACTERISTICS AND ELEC-

TRIC SHOCK HAZARD

There is no fire hazard when the connec-

tor is correctly wired and used within the

specified parameters. Incorrect wiring or

assembly of the connector or careless

use of metal tools or conductive fluids, or

transit damage to any of the component

parts may cause electric shock or burns.

Live circuits must not be broken by sepa-

rating mated connectors as this may

cause arcing, ionization and burning.

Heat dissipation is greater at maximum

resistance in a circuit. Hot spots may occur

when resistance is raised locally by damage,

e.g. cracked or deformed contacts, broken

strands of wire. Local overheating may also

result from the use of the incorrect applica-

tion tools or from poor quality soldering or

slack screw terminals. Overheating may

occur if the ratings in the product Data

Sheet/Catalog are exceeded and can cause

breakdown of insulation and hence electric

shock. If heating is allowed to continue it

intensifies by further increasing the local

resistance through loss of temper of spring

contacts, formation of oxide film on contacts

and wires and leakage currents through car-

bonization of insulation and tracking paths.

Fire can then result in the presence of com-

bustible materials and this may release nox-

ious fumes. Overheating may not be visually

apparent. Burns may result from touching

overheated components.

IMPORTANT GENERAL INFORMATION

(i) Air and creepage paths/Operating volt-

age. The admissible operating voltages

depend on the individual applications and the

valid national and other applicable safety

regulations.

For this reason the air and creepage path

data are only reference values. Observe

reduction of air and creepage paths due to

PC board and/or harnessing.

(ii) Temperature

All information given are temperature limits.

The operation temperature depends on the

individual application.

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

85

Cannon Microminiature

Connectors Customer

Support Locations

ASIA

Tuopandun Industrial Area, Jinda Cheng,

Xiner Village, Shajing Town,

Baoan District, Shenzhen City,

Guangdong, China 518125

Phone: 86.755.2726.7888

Fax:

86.755.2726.7515

GERMANY

Cannonstrasse 1

Weinstadt, 71384

phone: 49.7151.699.0

fax:

49.7151.699.217

ITALY

Corso Europa 41/43

Lainate (MI),

Italy 20020

phone: 39.02938721

fax:

39.0293872300

UK

Jays Close, Viables Estate

Basingstoke, RG22 4BA

phone: 44.1256.311200

fax:

44.1256.323356

USA

56 Technology Drive

Irvine, CA 92618

phone: 1.800.854.3028

fax:

1.714.628.2142

“Engineered for life” and “Cannon” are registered trademarks of ITT Inc.

Specification and other data are based on information available at the time of

printing, and are subject to change without notice.

www.ittcannon.com

Our facility is not currently certified by the DLA and this product is not covered

by the QPL/QML.


型号：	MD1-9SS
厂家：	ITT Cannon
描述：	D Type Connector, 9 Contact(s), Female, 0.05 inch Pitch, Solder Lug Terminal, Hole .087-.098, Receptacle 连接器
文件：	总87页 (文件大小：2473K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MD1-9SS [ITT]

相关型号：

MD1-9SS001

MD1-9SS001K

MD1-9SS2

MD1-B-14-440-1-A32-2-M

MD1-B-14-450-1-A47-2-M

MD1-B-14-610-1-A47-2-M

MD1-B-24-440-1-A32-B-D

MD1-B-24-440-1-A34-2-E

MD1-B-24-610-1-A14-B-D

MD1-B-24-610-1-A36-B-D

MD1-B-32-440-1-A14-B-E

MD1-B-32-440-1-A16-2-C