MJSB-51PS [ITT]
Board Connector, 51 Contact(s), 3 Row(s), Male, 0.05 inch Pitch, Solder Terminal, #1-64, Green Insulator, Receptacle,;型号: | MJSB-51PS |
厂家: | ITT Cannon |
描述: | Board Connector, 51 Contact(s), 3 Row(s), Male, 0.05 inch Pitch, Solder Terminal, #1-64, Green Insulator, Receptacle, 连接器 |
文件: | 总87页 (文件大小:2473K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Electronic Components
Cannon
Microminiature
Connectors
Cannon Microminiature Products
system, developed by ITT in the early
in all of our business portfolios.
1960’s. A separate section describes in
detail the twist pin electrical contact
technology (refer to page 6).
Six Sigma Engineering
ITT, utilizing its six sigma tools and mul-
tiple lean initiatives, offers the most
experienced engineering design team in
The Standard of Six Sigma
High Performance Micro Miniature
Connectors
When you specify a
Cannon microminiature
connector, you can rely on
a product designed,
developed, and manufac-
tured to the highest quali-
ty and reliability standards
in the industry. This tradi-
tion of excellence is
based on ITT’s corporate
culture of operating its
entire business under the
principles
ITT Cannon is a division of ITT Inc.
Developed first by Cannon in the 1960s,
Cannon's Micro Connector portfolio has
witnessed many product extensions
since then, and it remains the most
extensive in the industry, offering the
most reliable and cost effective range of
micro interconnect solutions. These
innovations have enabled ITT to provide
products and technologies to such
markets as:
of Six Sigma. At ITT, Six
Sigma is not just a quality
philosophy but a com-
plete corporate culture
the micro miniature interconnect field.
Using our systems approach, ITT contin-
ues to advance new interconnect tech-
nologies by developing advanced prod-
• Aerospace
• Computers Systems
• Defense Electronics
• Geophysical
• Industrial Automation
• Medical Electronics
• Network Systems
• Telecom Switching
• Underwater Systems
• Wireless
that drives the entire busi- ucts including higher density Nano
ness. Our Value Based
Management and Value Based Product
Development systems are two corner-
stones of ITT that allows for the develop-
ment of both leadership and product
0.025-inch spacing interconnects, Chip-
on-Flex filter connectors, flexible high
density circuits terminated directly to ITT
contacts, and innovative high speed
mixed signal connector configurations.
development principles, ensuring that the In conjunction
correct industry leading products are
with our design
teams, ITT
operates a
world class test
lab offering
state of the art
capabilities in electronic, fiber optic, and
mechanical test expertise . Our certified
test engineers and technicians can
develop a specific test plan based on
our customer’s specific needs.
Additionally, our team is experienced in
providing test services and programs for
US DOD Defense electronics and Space
related programs.
Offering the broadest selections of stan-
dard and custom micro interconnect
solutions, ITT is the one stop source for
design, development, manufacturing,
and test of sophisticated multi channel
high density connectors. Our product
portfolio consists of rectangular, circular,
quick disconnect, high speed signal, fil-
ter, hermetic, mixed signal packages,
and strip style interconnects. Each prod-
uct has unique mechanical engagement
and locking mechanisms to meet the
demands of harsh environment applica-
tions. These products include our Centi
Line .100-inch and .075-inch center
spacing, the Micro line .050 inch center
spacing, and our Nano line of .025-inch
center contact spacing. All of ITT’s micro
connectors utilize our twist pin contact
Six Sigma Manufacturing
ITT operates manufacturing facilities in
the United States, France, Germany,
Italy, Mexico, China, and the UK, all of
developed to the accepted market driven
lead times. These principles have
allowed ITT to become the market leader
www.ittcannon.com
2
Cannon Microminiature Products
which have particular prod-
uct area strengths allowing
ITT to offer a truly global
footprint to our customers.
Our facilities are world class
and accommodate full verti-
viding terminated flex circuit assemblies,
high temperature geophysical cable
assemblies, innovative medical electron-
ics cable assemblies, over mold strain
relief systems, and EMI shielded termina-
tions.
cal integration with the latest
manufacturing technologies
RoHS Compliance Information
including: automated and
robotic machining centers,
Super Market manufacturing
ITT has implemented a strict
parts control plan for all ITT
cells, Kanban pull systems,
electronics plants worldwide
and automated electrical,
that allows the Cannon Microminiature
mechanical, and optical test and inspection equipment. The
combination of our manufacturing strength and our advanced
manufacturing facilities allows ITT to offer products at market
driven prices. Our capabilities, especially in robotics, comput-
erized precision tooling, Kaizen Project Management, Six
Sigma tools, and test labs, gives ITT the most optimized global
manufacturing footprint in the interconnect industry.
connector product portfolio to meet the requirements of
European Union Directive 2002/95/EC better know as the
Reduction of Hazardous Substances initiative. To make things
easier for our customers, all Cannon Microminiature products
can be ordered with an R prefix number which insures our
customers will receive RoHS compliant parts for their commer-
cial electronics applications and equipment. Since most RoHS
hazardous substances center around specific metal plating
and lead solder coatings, ITT's products for RoHS compliance
are available in the following plating finishes: electroless nickel,
stainless steel, Anodize over aluminum and Gold plating. It
should be noted that gold plating
The Custom Difference
As the industry leader in harsh
environment interconnect appli-
cations, ITT’s world class engi-
would be recommended as the
replacement for tin-lead solder
neering teams will work directly
with our customers to design and develop cost effective solu-
tions for their applications . In many cases we may modify
one of our standard designs to ensure a highly reliable solu-
tion where timing is critical. Yet, in those cases where a com-
plete custom interconnect solution is required, ITT will work
with our customer’s Engineers to design an interconnect solu-
tion which will be cost effective yet highly reliable. As profes-
sional consultants, our Engineering teams will provide a thor-
ough systems and mechanical analysis of any proposed solu-
tion. These analyses provide our customers with sophisticat-
ed electrical signal and mechanical charac-
when ordering board mount con-
nectors.
Non Compliant RoHS Materials
Advanced Aerospace specifications and DOD system per-
formance requirements demand the necessity to maintain
production status for the primary base metals and Chem film
coatings typically utilized in Aerospace electronics. Thus, in
order to support ITT's Aerospace customer base and maintain
our leadership position
terizations to determine the best solution for
in micro miniature con-
their application.
nector technologies,
ITT will continue to
provide interconnect
products with cadmium
plating and tin lead
solder in support of
these markets. These
materials are designed
to be comparable to
In addition to custom
connectors, ITT offers
sophisticated custom
cable assembly capa-
bilities for a wide
range of harsh envi-
ronment applications.
Our in house expert-
M83513.
ise translates to our ability to integrate differ-
ent technologies within a custom cable har-
ness. ITT's capabilities include discrete wire terminations to
multi wire cable harnesses with multiple connector configura-
tions as part of the final assembly. We also specialize in pro-
Please consult Customer Service if RoHS part verification is
required.
www.ittcannon.com
3
Table of Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Microminiature Product Overview Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Twist Pin Contact System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Micro-D Metal Shell - .050" Contact Spacing (MDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Micro-D PCB - .050" Contact Spacing (MDM-PCB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Micro-D Coaxial/Power - .050" Contact Spacing (MDM-C/P). . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Hermetic (MDMH). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Filter (TMDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Micro-D Plastic Shell - .050" Contact Spacing (MD/MDV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Micro Center Jackscrew (MJS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Microminiature Circular - .050" Contact Spacing (MIK, MIKM, MIKQ) . . . . . . . . . . . . . . . . . . . . 44
Microstrips .050" Contact Spacing (MT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Microminiature Strip - .100/.050" Contact Spacing (MT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Micro Edgeboard - .050" Contact Spacing (MEB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
The Centi Line - .075" Contact Spacing (2D). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Centi-D Loc-.075" Contact Spacing (CDL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Strip Connectors - .100"/.075" Contact Spacing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
The NANO Line - .025" Contact Spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Strip Connectors - .025" Contact Spacing (NT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
NANO D Metal Shell - .025" Contact Spacing (NDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Center Jackscrew - .030" Contact Spacing (NJS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Custom Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Flex Circuit Cable Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Custom Back Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Appendix
Standard Wire Termination “L” Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Standard Wire Termination “H” Code Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Wire Color Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Product Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
www.ittcannon.com
4
Cannon Microminiature Product Overview Guide
MDM
MDM PCB
MDM
C/P
MDMH
Hermetics
TMDM
Filter
MD**
MDB
Coaxial
MJS
MIK
MIKM
Type
Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket
3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max.
Current Rating
Contact
Resistance
8 milliohms max. 8 milliohms max. 8 milliohms max. 24 milliohms max. 15 milliohms max. 8 milliohms max. 8 milliohms max. 8 milliohms max. 8 milliohms max. 8 milliohms max.
(signal)
Contact
Material
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper and steel
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
Shell
Metal
Metal
Metal
Metal
Steel
Metal
Plastic
Plastic
Plastic
Plastic
Metal
Steel
Shell Material
Aluminum
Aluminum
Aluminum
Aluminum
Thermoplastic
& Thermoset
Thermoset
Thermoplastic
& Thermoset
Thermoplastic
Available
Layouts
9, 15, 21, 25, 31, 9, 15, 21, 25, 31, 7C/P2, 24C/P4, 9, 15, 21, 25, 31, 9, 15, 21, 25, 31, 9, 15, 21, 25, 31,
7C/P2
10, 26, 51 & 66 -
Rect/unshrouded
16, 28 & 35 -
7 & 55
7, 55 & 85
37, 51 & 100
37, 51 & 100
27C/P5 &
10C/P10
37 & 51
37 & 51
37 & 51
Rect/shrouded 26,
38, 42 & 76 -
Polarized D
Configuration
RoHS
Polarized D
Polarized D
Polarized D
Polarized D
Polarized D
Polarized D
Polarized D
Rectangular &
Polarized D
Circular
Circular
Available
Yes*
Available
Yes
Available
Yes
Available
Yes*
No
Available
Yes*
Available
Yes
Available
Yes*
Available
Yes
Available
Yes
Factory
Yes
Terminated
Space
Applications
Available
7
Available
18
Available
22
Yes
23
Yes
25
Available
28
Available
32
Available
39
Yes
44
Yes
44
Page Number
MIKQ
MT*
MEB
2D
CDL
CTA*
NDM
NTP
NJS
Type
Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket
3A max. 3A max. 3A max. 5A max. 5A max. 5A max. 1A max. 1A max. 1A max.
8 milliohms max. 8 milliohms max. 8 milliohms max. 9 milliohms max. 9 milliohms max. 9 milliohms max. 60 milliohms max. 60 milliohms max. 60 milliohms max.
Current Rating
Contact
Resistance
Contact Material gold plated
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
copper alloy
gold plated
precious metal
precious metal
precious metal
copper alloy
copper alloy alloy & gold platedalloy & gold platedalloy & gold plated
copper alloy
copper alloy
copper alloy
Shell
Metal
Steel
Plastic
Plastic
Plastic
Plastic
Thermoplastic
139
Plastic
Metal
Plastic
Plastic
Shell Material
Thermoplastic
Thermoset
Thermoplastic
Thermoplastic
Thermoset
Thermoset
1 thru 40
Thermoplastic
Available
Layouts
7, 19 & 37
MTV - 1 thru 120 64, 128, 92
MTB - 1 thru 80
19, 31, 52, 79
& 100
CTA3 - 1
thru 53
CTA4 - 1
thru 60
9, 15, 21, 25,
31 & 37
Rectangular -
9, 24 & 44
Circular - 27,
72 & 246
& 184
Configuration
RoHS
Circular
Strip
Polarized D
Polarized D
Polarized D
Strip
Polarized D
Strip
Rectangular &
Circular
Available
Yes
Available
Yes*
Available
Yes*
Available
No
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Factory
Terminated
Space
Applications
Yes
44
Yes
48
Yes
54
No
59
No
65
No
66
Yes
72
Yes
71
Yes
73
Page Number
* Solderpot versions available for end user termination
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
5
Micro Twist Pin
Cannon Microminiature Products
NORMAL MATING
CONDITIONS
Cannon
MICROPIN
WIRE
WELDED TIP
SEVERE MISALIGNMENT
WIRE CRIMP
SLEEVE
Figure 1
CRIMP
AREA
TWIST PIN CONTACTS WILL MATE
EVEN UNDER SEVERE MISALIGNMENT
Pos-A-Line Contact Alignment
Figure 2
The flexible twist-pin is recessed into the insulator and the rigid socket is
exposed, reversing the traditional positions of pin and socket. During mating, the
socket is guided into the pin insulator by the lead-in chamfer. The pin is kept
from flexing beyond the socket capture radius by the walls of the cavity. The
hemispherical weld of controlled radius at the tip of the pin combines with the
lead-in chamfers of the socket contact and the pin insulator to carn the pin into
alignment. By controlling the welding process and the dimensions of the socket
contact and the insulators, it is impossible for the recessed pin to escape the
socket capture radius.
Twist Pin Contact Technology
tact and insulator material. The net result is a contact system
that makes it impossible for the recessed pin to escape the
socket capture radius. Figure 2 shows the twist pin features
as well as mating and severe misalignment conditions.
The foundation of ITT’s Cannon Micro Connector portfolio
starts with ITT’s innovative twist pin contact system. This sys-
tem was originally developed in the early 1960’s and ITT was
one of the original interconnect companies to license this
technology and improve it. Our forty five years of experience
in manufacturing and establishing a fully automated manufac-
turing system for this contact has truly given ITT the foremost
knowledge in twist pin contact technology.
The advantages of ITT’s twist pin contact system are many
and have been field proven in the most demanding applica-
tions and environments for over forty five years. Some of
these advantages include:
• Seven points of electrical contact (Micro 0.050-inc & Centi
Line 0.075-inch Interconnect Products)
As the core of our micro products, the twist pin contact offers
a superior electrical and mechanical system that outperforms
traditional machined or stamped electrical contract systems.
ITT’s twist pin system consists of the Micro Socket and the
Micro pin or Twist pin. Figure I show the basic contacts.
• Five points of electrical contact (Nano 0.025-inch
Interconnect Products)
• Contact and crimp sleeve materials carefully optimized for
extremely reliable crimps- No design tradeoffs
Figure 1
The twist pin contact system consists of several stranded
cores making up the wire bundle. The strands are subse-
quently heat treated and a weld is performed on the tip of
each contact. Crimp sleeves are then inserted over the con-
tact and crimp areas are defined to produce a seamless crimp
system. The entire twist pin system is referred by ITT as a
Pos-A-Line contact alignment system. Our reference to this
system identifies that the flexible twist pin is recessed into the
insulator and the rigid socket is exposed thus reversing the
traditional positions of the pin and socket. During the mating
sequence, the socket is guided into the pin insulator by the
lead-in chamfer. The pin is kept from flexing beyond the sock-
et capture radius by the walls of the cavity. The hemispherical
weld of controlled radius at the tip of the pin combines with
the lead-in chamfer of the socket contact and the pin insula-
tor to cam the pin in alignment. ITT has developed a very
robust Six Sigma manufacturing process that controls the
welding process as well as the dimensions of the socket con-
• Seamless crimp sleeves
• Multiple 4-indent wire crimps standard and smaller bore
micro socket contacts
• Standard integral tail & thru bundle micro pin contacts (high
density packaging)
• High mating cycles
• High current handling capabilities
• System qualification in numerous Aerospace, Defense
Electronic, and high temperature Geophysical applications.
• Wide array of wire terminations
The advantages listed above are by no means inclusive of
ITT’s innovative product improvement processes. Moving for-
ward, ITT plans to introduce additional new product features
supporting enhanced twist pin contact performance.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
6
Micro-D Metal Shell - .050" Contact Spacing
MDM
MDM connectors are used in applications
requiring highly reliable, extremely small, light-
weight connectors with higher density contact
configurations than available in traditional rec-
tangular connectors. They are available in 8
shell sizes accommodating from 9 to 100 con-
tacts, and special arrangements of power and
coaxial contacts.
employs size 24 MICROPINTM/MICROSOCKETTM
contacts on .050 (1.27) centers in a contact
density identical to the standard MICRO-D con-
nector series, but with these additional features:
• Aluminum shells to provide greater
strength, prevent chipping, cracking or
breaking, offer electromagnetic (EMI) and
RFI shielding.
These connectors are designed to meet the rap-
idly increasing demands for an environmental,
high performance, rugged, moisture-sealed
microminiature connector. This connector
• Silicone elastomer compression interfacial
seal to provide a moisture and humidity
seal between each contact and between
contacts and shell.
Specifications
STANDARD MATERIALS AND FINISHES
MECHANICAL FEATURES
Shell
- 6061-T6 Aluminum alloy per
QQ-A-200/8, yellow chromate/
cadmium, Type II, Class 3 over
electroless nickel per SAE
AMS-C-26074, Class 4.
- Liquid Crystal Polymer per MIL-M-24519,
Type GLCP-30F (9-100)
Coupling
- Friction/jackscrews
- Keystone-shaped shells
- .050 (1.27)
Polarization
Contact Spacing
Centers
Shell Styles
- Plug and receptacle
Insulator
No. of Contacts
- 9 thru 100 signal;
5 signal/2 coaxial;
5 signal/2 power;
11 signal/5 coaxial;
11 signal/5 power;
0 signal/10 coaxial;
0 signal/10 power;
20 signal/4 coaxial;
20 signal/4 power
- Glass filled diallyl phthalate per
MIL-M-14, Type SDGF (7*2 and 24*4)
- Polyphenylene sulfide per
MIL-M-24519, Type GST-40F (16*5)
- Polyester per MIL-M-24519, Type
GPT-30F (10*10)
Contacts
- Copper alloy, gold plate
Mounting Hardware - 300 Series stainless steel, passivate
Kit, Jackpost (3) items - 300 Series stainless steel, passivate
Coaxial Cable
Wire Size
- RG - 178/U
- #24 thru #32 AWG
Washer
- 400 Series stainless stell, passivate
Contact Termination - Multiple indent crimp
Standard Epoxy
- Hysol EE4215/HD3561, color black
or Hysol EE4198/HD3561, color green
Performance Data
The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where
applicable. Data is applicable to standard connectors with standard termination. Variations may affect this
data, so please consult customer service for further information on your requirements.
Test
Method
Criteria of Acceptanc
e
Dielectric Withstandin
Voltage
g
Method 3001:
600 VAC at sea level
150 VAC at 70,00' altitude
No breakdown
No breakdown
Insulation Resistance
Method 3003
5,000 megohms minimum
No physical damage
Thermal Shock
Method 1003. Condition
- 55˚C to +125˚C
Method 2004, Condition
50 G's, 3 axes, 6 millisecond
A:
E:
Physical Shock
No physical damage
No loss of continuity
> 1 µsec
duration sawtooth pulse
Vibration
Durability
Method 2005, Condition
IV:
No physical damage
No loss of continuity
No mechanical or electri
20 G's, 10-2,000 Hz.
12 hrs
> 1 µsec
500 cycles of matin
unmating, 500 CPH
g and
max.
cal defects
Moisture Resistance
Method 1002, Type II,
omit steps 7a & 7b
Insulation resistance
> 100 megohms
Salt Spray
Method 1001, Condition
48 hours
B:
Shall be capable of matin
and meet contact resistance
g and unmating,
requirements
Contact Resistance
(MIL-STD-202)
Method 1001, Condition
At 3 amps
At 1 milliamp
B:
8 milliohms maximum
10 milliohms maximum
Contact Retention
Per 83513-Style
5 lb. minimum axial
load
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
7
Micro-D Metal Shell - .050" Contact Spacing
MDM
How to Order
For 83513-Style ordering information see pages 16 and 17
R
MDM
-
51
P
H
001
P
- XXX
RoHS COMPLIANCE
SERIES
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODE
HARDWARE
SHELL FINISH MOD CODES
TERMINATION CODE*
SERIES
(H) 001 - 18",7/34 strand,#26 AWG,
MIL-W-16878/4, Type E Teflon, yellow.
(H) 003 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681 System I.
MDM: (Size 9-100) Liquid Crystal Polymer (LCP)
MDM: (Combo Layout) Diallyl Phthalate (DAP)
CONTACT ARRANGEMENTS
9-15-21-25-31-37-51-100 (standard)
16C5, 10C10, 7C2, 24C4 (coaxial) or combination of
(L) 1 - 1/2" uninsulated solid #25
AWG gold plated copper.
(L) 2 - 1" uninsulated solid #25 AWG
gold plated copper.
}
16P5, 10P10, 7P2, 24P4 (power)
coax and power
CONTACT TYPE
P - Pin
S - Socket
SHELL FINISH MOD CODES
No Number - (Standard cadmium/yellow
chromate over nickel
A174 - Electroless nickel
A172 - Gold over nickel
A141 - Irridite/alodine
TERMINATION TYPE
H - Harness-insulated wire.
L - Solid-uninsulated wire.
S - Solder pot to accept #26 AWG MAX.
harness wire. (Not available with power
contact arrangements.)
A30 - Black anodize
HARDWARE
M - Military specification hardware, see
page 11 for military hardware codes.
P - Jackpost
*See page 79 and 81 for additional Termination codes.
K - Jackscrew-standard profile
L - Jackscrew-low profile
F - Float mount
B - No hardware standard
.091 (2.31) dia. hole for sizes 9-51;
.120 (3.05) dia. hole for size 100.
A - .125 (3.18) dia. mounting holes for sizes 9-51;
.166 (4.22) dia. hole for size 100.
B1 - .1475 (3.75) dia. hole for size 100
(Per 83513-Style)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
8
Micro-D Metal Shell - .050" Contact Spacing
COTS or Non Mil-Spec or Commercial or Industrial Standard Wire Termination Codes
Cannon Modification Code (Not MS)
MDM
The following termination codes are listed for your information. For additional codes please refer
to Appendix on page 79 and 81. All wire lengths are minimum.
Harness Type (H)
#26 AWG per MIL-W-16878/4, 7/34 strand, type E Teflon, stranded.
Solid Uninsulated Type (L)
#25 AWG gold plated copper
Length
3 (76.2)
All Yellow
H020
H019
H026
H029
H028
H001
H038
H009
H010
H011
H013
H017
H042
Color Coded*
H027
Termination Code
Length
.125 (3.18)
L61
L56
L57
L39
L58
L1
6 (152.4)
H016
.150 (3.81)
8 (203.2)
H034
.190 (4.83)
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.8)
120 (3048.0)
H025
.250 (6.35)
H002
.375 (9.52)
H003
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
H023
L14
L2
H004
H005
L7
H006
L6
H048
L16
L10
H046
H041
* Cavity #1 black
Contact Arrangements
(Face View of Pin insert - Use Reverse Order for Socket Side)
Standard
.025
(0.64)
TYP.
.050
(1.27)
TYP.
.043
(1.09)
1
2
3
4
5
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10 11
6
7
8
9
9
10 11 12 13 14 15
12 13 14 15 16 17 18 19 20 21
9 Contacts
15 Contacts
21 Contacts
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19
1
2
3
4
5
6
7
8
9
10 11 12 13
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
14 15 16 17 18 19 20 21 22 23 24 25
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
25 Contacts
31 Contacts
37 Contacts
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
51 Contacts
100 Contacts
Contact identification numbers are for reference only and do not appear on insulator or connector body.
.714 (18.14)
.460 (11.68)
.320
(8.13)
Coaxial
.103
1
2
3
4
5
6
7
A1
A2
A3
A4
1
8
2
9
3
4
1
2
3
A1
A2
A3
A4
A5
A1
A2
8
9 10 11 12 13
5
6
7
4
5
14 15 16 17 18 19 20
10 11
.007
(0.18)
Size 51 Shell
Size 25 Shell
Size 51 Shell
11 Micro contact
5 Coax or 5 Power
5 Micro contact
2 Coax or 2 Power
20 Micro contacts
4 Coax or 4 Power
(Not MS)
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
Size 100 Shell
0 Micro contact
10 Coax or 10 Power
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
9
Micro-D Metal Shell - .050" Contact Spacing
MDM
COTS or Non Mil-Spec or Commercial or Industrial Shell Dimensions (Conforms to 83513-Style)
Plug
.186 (4.72)
MAX.
.09ꢀ
(2.ꢀ6)
REF.
.284 (7.21)
MAX.
TWO MTG. HOLES
B
C
.091 .00ꢀ(2.ꢀ1 0.08)
.110 (2.79)
MAX.
F
A
.416 (10.57)
MAX.
G
D
E
.200 (5.08)
MAX.
Solder Pot
Receptacle
.296 (7.52)
MAX.
TWO MTG. HOLES
.091 .00ꢀ(2.ꢀ1 0.08)
F
B
.09ꢀ
(2.ꢀ6)
REF.
.110 (2.79)
MAX.
.429 (10.09)
MAX.
E
G
D
.200 (5.08)
MAX.
C
.198 (5.0ꢀ)
MAX.
A
Solder Pot
Receptacle (MDM-100 only)
.429 (10.90)
MAX.
.198 (5.0ꢀ)
MAX.
TWO MTG. HOLES
.120 .00ꢀ(ꢀ.05 0.08)
B
.ꢀ94 (10.01)
MAX.
.09ꢀ (2.ꢀ6)
REF.
G
D
E
.296 (7.52)
MAX.
C
F
A
Pigtail termination
F
Part Number
By Shell Size
A
Max.
B
Max.
C
Max.
D
Max.
E
Max.
+_.005
(0.13)
G
Max.
Average Weights**
oz. (gm.) 5ꢀ
MDM-9P*
.785 (19.94)
.785 (19.94)
.935 (23.75)
.935 (23.75)
1.085 (27.56)
1.085 (27.56)
1.185 (30.10)
1.185 (30.10)
1.335 (33.91)
1.335 (33.91)
1.485 (37.72)
1.485 (37.72)
1.435 (36.45)
1.435 (36.45)
2.170 (55.12)
2.170 (55.12)
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.10)
.400 (10.16)
.400 (10.16)
.550 (13.97)
.550 (13.97)
.700 (17.78)
.700 (17.78)
.800 (20.32)
.800 (20.32)
.950 (24.13)
.950 (24.13)
1.100 (27.94)
1.100 (27.94)
1.050 (26.67)
1.050 (26.67)
1.442 (36.63)
1.442 (36.63)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.270 (6.86)
.310 (7.87)
.310 (7.87)
.360 (9.14)
.360 (9.14)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.394 (10.01)
.394 (10.01)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
.063 (1.79)
.063 (1.79)
.084 (2.39)
.083 (2.37)
.105 (2.99)
.104 (2.97)
.119 (3.39)
.118 (3.36)
.140 (3.99)
.139 (3.96)
.161 (4.59)
.160 (4.56)
.193 (5.50)
.188 (5.35)
.500 (14.3)
1.040 (29.5)
MDM-9S*
MDM-15P*
MDM-15S*
MDM-21P*
MDM-21P*
MDM-25P*
MDM-25S*
MDM-31P*
MDM-31S*
MDM-37P*
MDM-37S*
MDM-51P*
MDM-51S*
MDM-100P*
MDM-100S*
*Add lead type and length; see How To Order.
***Weight given is 1/2", uninsulated, solid, #25 AWG gold plated copper pigtails.
Panel Mounting Dimensions (Sizes 9 - 100)
.100 .00ꢀ
.200 .00ꢀ
(7.62 0.ꢁ13
(ꢀ.08 0.ꢁ13
.19ꢀ .00ꢀ
(ꢁ0.01 0.ꢁ13
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
10
Micro-D Metal Shell - .050" Contact Spacing
MDM
Panel Cutouts
NOTE: See page 13 for rear panel mounting configuration.
Shell Sizes 9 thru 51
C
.450 .002
(11.43 0.05)
+.005
C
A
.100
(2.54)
R TYP.
-.000
.030 (0.76) TYP.
+0.13)
D
TYP.
-0.00
C
D
TYP.
D
B
B
+
+
+ +
FULL R. (TYP.)
.015 (0.38)R.
MAX.(TYP)
FULL R.
(TYP.)
A
26˚/27˚TYP
FULL R.
(TYP.)
PANEL REF.
Figure 1
Front Mounting
Figure 2
Rear Mounting
Figure 3
Edgeboard Mounting
Shell Size 100
+.005
1.805
-.000
.450+_.002
+.005
-.000
.030
+0.13
-0.00
)
.118
(45.85
(11.43+_0.05)
+.005
+.005
+.005
+.005
(0.76) TYP.
+0.13
-0.00
1.805 -.000
.118
1.805 -.000
)
-.000
(3.00
.118
-.000
+0.13
-0.00
+0.13
+0.13
-0.00
)
)
(45.85
(3.00
)
(45.85
+0.13 )
(3.00
-0.00
-0.00
+.004
+.004
.361 -.000
.401
-.000
+
+
+
+
+0.10
-0.00
+0.10
)
(9.17
)
(10.18
-0.00
+.004
1.456
+.004
-.000
1.520
-.000
+0.10
-0.00
(36.98
)
+0.10
)
(38.61
.015 (0.38)
R. MAX (TYP.)
.125
(3.18
-0.00
FULL R. (TYP.)
FULL R. (TYP.)
FULL R. (TYP.)
)
PANEL REF.
Figure 1
Front Mounting
Figure 2
Rear Mounting
Figure 3
Edgeboard Mounting
A
+.004
-.000
B
+.004
-.000
C
+.005
-.000
D
+.005
-.000
For 9-51 Shell Sizes
NOTES:
1. Front panel mounting is the preferred mounting
method. Front panel mounting dimensions
Shell
Size
Cutout
Figure
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
.408
.401
-
.271
.252
-
.570
.570
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
9
.570
(figure 1) will accommodate either #2-56 screws
or jackpost hardware.
.558
.551
-
.271
.252
-
.720
2. Rear panel mount dimensions (figure 2) will
accommodate #2-56 screw hardware only.
When mounting the connector with rear panel
mount jackpost see the panel cut-out
dimensions.
3. Edgeboard mounting bracket (figure 3) uses #2-
56 screws. Dimension .450+/-.002 (11.43+/-
0.05) locates the MDM receptacle flush with the
end of the board.
.720
15
21
25
31
37
51
.720
.708
.701
-
.271
.252
-
.870
.870
.870
.808
.801
-
.271
.252
-
.970
.970
.970
For 100 Shell Size
.958
.951
-
.271
.252
-
1.120
1.120
1.120
1.270
1.270
1.270
1.220
1.220
1.220
NOTES:
1. Front mounting is the preferred mounting
method. Front panel mounting dimensions
(figure 1) will accommodate either #4-40 screws
or jackpost hardware.
2. Rear panel mount dimensions (figure 2) will
accommodate #4-40 screw hardware only see
the panel cut-out dimensions.
3.Edgeboard mounting bracket (figure 3) uses #4-
40 screws. Dimension .450+/-.002 (11.43+/-
0.05) locates the MDM receptacle flush with the
end of the board.
1.108
1.101
-
.271
.252
-
1.058
1.051
-
.315
.295
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
11
Micro-D Metal Shell - .050" Contact Spacing
MDM
Mounting Hardware Views (for sizes 9-51)
This hardware supplied unassembled.
LOCK
SCREW
MATꢀNG
FACE
#2-56 UNC-2B
RETAꢀNꢀNG
CLꢀP
.185 (4.70) MAX.
CONNECTOR
SHOWN FOR
REF. ONLY
.408 (10.36)
MAX.
.182 (4.62)
PANEL REF.
.500
(12.7)
MAX.
.688 (17.48)
MAX.
MAX.
.232 (5.89) MAX.
BUSHꢀNG
.093 (2.36)
Screw Lock Assembly
#2-56 UNC-2A
Jackpost - (P)
RECOMMENDED
PANEL THꢀCKNESS
Screw Lock Assembly*
.052
*NOTE Torque value is 2.5 in/lbs max.
(1.32) TYP.
.096 .005
(2.44 0.13)DꢀA.
#2-56
UNC-2B
THD
.260
(6.60) MAX.
.178 .005
(4.52 0.13)
.170
(4.32) MAX.
90˚ Angle Mounting
Bracket
B
A
90˚ Angle Mounting Bracket
A
B
Description
Part Number
322-9500-000
320-9505-000
015-9516-002
+/-.005 ( 0.ꢀ13
Max.
Screw Lock Assembly
Jackpost kit
Mounting Bracket 90˚ MDM
for 9 thru 37 Shell Sizes
Mounting Bracket 90˚ MDM
for 51 Shell Size
N/A
N/A
.147 (3.73)
.169 (4.29)
.308 (7.82)
.350 (8.89)
015-9516-003
NOTES: Screw lock assembly (322-9500-000) can be used for front mounting only. Jackpost kit
(320-9505-000) consists of two assmblies, shipped unassmbled.
Jackpost Bushing (for rear panel mounting-for sizes 9-51)
HEX IS .135 (3.43)/.115 (2.92) ACROSS FLATS
C
A
.170 (4.32)
.185 (4.70)
#2-56 UNC-2B THD
MATING FACE
.105 (2.67)
.100 (2.54)
R TYP.
.126 (3.20)
.125 (3.18)
DIA. TYP
A
B
27˚
26˚
TYP
Jackpost diameter within the "A"
dimension is .124/.120 (3.15/3.05).
.500 (12.7)
.480 (12.19)
Plug and Receptacle Dimensions
A
B
#2-56 UNC
2A THD
Shell
Size
+.004 (0.10)
-.000 (0.00)
+.004 (0.10)
-.000 (0.00)
C
+_.005 (0.13)
.565 (14.35)
.715 (18.16)
.865 (21.97)
.965 (24.51)
1.115 (28.34)
1.265 (32.13)
1.215 (30.86)
9
.401 (10.19)
.551 (14.00)
.701 (17.81)
.801 (20.34)
.951 (24.16)
1.101 (27.97)
1.051 (26.70)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.252 (6.40)
.295 (7.49)
15
21
25
31
37
51
A
Panel A
+.005 (0.13)
-.000 (0.00)
Jackpost Kit
Number*
Thickness
3/32 (2.4)
1/16 (1.6)
3/64 (1.2)
1/32 (0.8)
.087 (2.21)
.056 (1.42)
.042 (1.07)
.025 (0.64)
320-9505-007
320-9505-006
320-9505-005
320-9505-004
*A kit consists of 2 jackpost, 2 nuts, 2 washers.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
12
Micro-D Metal Shell - .050" Contact Spacing
MDM
Mounting Hardware Views (sizes 9-51)
This hardware is factory installed.
.ꢁ35 (18.6ꢁꢀ
MAX.
HEX HEAD -
CONNECTOR
SHOWN FOR
REF ONLY
MATING
FACE
CONNECTOR
SHOWN FOR
REF. ONLY
.050 (1.2ꢁꢀ ACROSS FLATS
.050 (1.2ꢁꢀ DEEP (REFꢀ
.014 .004
(0.36 0.10ꢀ ALLOWABLE
DIAMETRAL FLOAT
.150 .003
.490
.020 (0.51ꢀ MAX. ALLOWABLE
AXIAL FLOAT
(3.81 .0ꢁ6ꢀ
(12.45ꢀ MAX
.155
(3.94ꢀ MAX.
.185 (4.ꢁ0ꢀ
.093
MAX
(2.36ꢀ
REF.
MATING
FACE
.090 .0015
PART HAS A .040 (1.02ꢀ
MAX. AXIAL FLOAT
#2-56 UNC-2A
.031 .003
PART HAS A .040 (1.02ꢀ
MAX AXIAL FLOAT
#2-56
(2.29 0.038ꢀDIA
MATING
FACE
UNC-2A
(0.ꢁ9 0.08ꢀ
Float Mount - (F)
Jackscrew - (K) Standard Profile
Jackscrew - (L) Low Profile
Shown here is a cutaway view of the float mount for the MDM connector. The basic shell dimensions
are the same for the float mount and the screw mounting hole configurations. View shown is for standard
float mount front panel mounting. Reverse mounting is available on request.
* NOTE: Torque values are as follows:
Low Profile Jackscrew (L)-2.5 in-lbs
Standard Jackscrew (K)-2.5 in-lbs
Mounting Hardware to Military Specification (for sizes 9 - 100) per 83513/5-Style
This hardware supplied in kits unassembled (2 pieces of each item).
PLUG (REF. WITH
.092 (2.34) DIA.
#2-56 UNC-2A
MOUNTING HOLES
THREAD TYP.
#2-56 UNC-2A
PLUG (REF.) WITH
THREAD TYP.
.092 (2.34) DIA.
.062 (1.57)
MOUNTING HOLES
HEX. (REF.)
.361 (9.17) MAX.
.390 (9.91) MAX.
SIZE 100 ONLY
.010 (0.25)
TH'K (REF.)
.868 (22.05) MAX.
.902 (22.91) MAX.
Allen head
Optional Head Configuration
Plug and Receptacle
Low and High Profile
Size 9-51
.010 (0.25)
TH'K (REF.)
POTTING WELL
(REF.)
POTTING WELL (REF.)
Figure 1. Jackscrew - Low profile
Slotted Head
Size 100* (same dimensions)
Size 9-51
Size 100*
Figure 2. Jackscrew - High Profile
Slotted Head
Size 9-51
Size 100*
.125 (3.18) HEX.
.187 (4.75) HEX.
#2-56 UNC-2B THREAD
#4-40 UNC -2A THREAD
.190/.185(4.83/4.70)
.185/.175(4.70/4.44)
To order hardware kits separately, order either by M83513/5-Style** or by 320-950X-XXX.
Size 9-51
Size 100*
Mod Code Part Number
Mod Code Part Number
.475 .025
(12.06 0.64)
Description
* *
05
06
02
03
07
* *
15
16
12
13
17
Slotted Head Jackscrew Assy Low Profile (Figure 1)
M5 320-9508-025
M6 320-9508-027
M2 320-9508-026
M3 320-9508-028
M7 320-9505-033
M15 320-9508-021
M16 320-9508-023
M12 320-9508-022
M13 320-9508-024
M17 320-9505-030
SIZE 100 SAME
Slotted Head Jackscrew Assy Low Profile (Figure 2)
Allen Head Jackscrew Assy Low Profile (Figure 1)
Allen Head Jackscrew Assy High Profile (Figure 2)
Jackpost Assy (Figure 3)
LOCKWASHER
.062 .010
(.157 0.25)
RETAINING NUT
.154 (3.91) HEX.
.187 (4.75) HEX.
SIZE 100 SAME
Figure 3. Jackpost Assembly
Size 9-51
Size 100*
*Size 100 requires B1 size mounting holes for Mil-Spec hardware
Note: Torque values as follows:
Size 9-51 4.0 in-lbs
Size 100 6.0 in-lbs
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
13
Micro-D Metal Shell - .050" Contact Spacing
MDM
Mounting Hardware Views (for size 100)
This hardware supplied unassembled.
.123 .005
(3.12 0.13) DIA.
#4-40 UNC-2B
THD
+.010
-.005
180
(4.57
#4-40 UNC-2A THD
#4 LOCK WASHER
PANEL -
+.025
-0.13
)
MAY BE USED WITH
.093 (2.36) MAX
THICK PANEL
A
.395 (10.03)
MAX.
.500 (12.70)
MAX.
.185 (4.70)
MAX.
MATING SIDE
#4-40 UNC-2B NOTHING OR FEMALE THD
B
.064 .010
(1.62 0.25) TYP.
Jackpost - (P)
90˚Angle Mounting
Bracket
.235 .005
(5.97 0.13)
Note: Size 100 requires .120 dia (B) mounting hole
when using Commercial (P) jackpost kits.
90° Angle Mounting
Bracket
B
A
Description
Jackpost kit
Mounting Bracket 90˚ MDM
Part Number
320-9505-015
015-9528-000
Max.
.005 (0.13)
N/A
.191 (4.85)
.370 (9.40)
This hardware is factory installed.
MATING
FACE
.014 .004
.735 (18.67)
MAX.
(0.36 0.10) ALLOWABLE
CONNECTOR
SHOWN FOR
REF. ONLY
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.174 .005
(4.4 .10)
HEX. SOCKET HEAD.
.078 (1.98) ACROSS FLATS
.050 (1.27) MIN. DEPTH
.185 (4.70)
.155 (3.94) MAX.
.093
(2.36)
REF.
MAX
.040 (1.02) MAX.
AXIAL FLOAT
.116 .002
(2.29 .051)
DIA
.031 .003
PART HAS A .040 (1.02)
MAX AXIAL FLOAT
#4-40
UNC-2A
THD
MATING
FACE
(0.79 0.08)
#4-40 UNC-2A THD
MATING SIDE
Jackscrew - (K) Standard
Float Mount - (F) Std.
Jackscrew - (L) (Low Profile)
*NOTE: Torque values are as follows:
Low Profile Jackscrew (L)-4.0 in-lbs
Standard Profile Jackscrew (K)-4.0 in-lbs
Jackpost Bushing (for Rear Panel Mounting)
Dimensions for Rear Panel Mounting
ENGAGING FACE
3/16" HEX.
LOCKING POST
1.800 .005
(45.72 0.13)
#4-40 UNC-2B
.185 (4.70)
.170 (4.32)
+.004
-.000
.401
A
A
)
+1.10
-0.00
(10.18
Panel
+.005 (0.13)
-.000 (0.00)
Jackpost Kit
Number*
.500 (12.70)
MAX.
Thickness
.161 (4.09)
.159 (4.04)
+.004
DIA.
1.516
-.000
3/32 (2.4)
1/16 (1.6)
1/32 (0.8)
3/64 (1.2)
.087 (2.21)
.058 (1.42)
.025 (0.64)
.042 (1.07)
320-9505-013
320-9505-012
320-9505-010
320-9505-011
+1.10
-0.00
)
(38.51
RECEPTACLE SHOWN
FOR REF. ONLY
+.005
-.000
.125
R
)
+0.13
-0.00
(3.18
#4-40 THREAD
RETAINING NUT
*2 jackposts, 2 nuts, 2 washers
Torque value for size 100
Note: Size 100 requires B mounting hole shell
size when using rear panel mount jackposts
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
14
Micro-D Metal Shell - .050" Contact Spacing
MDM
Connector Saver
Save wear and tear on your equipment and
systems connectors by using the "Connector
Saver".
Simply mate the "Connectors Saver" to your
unit and use the opposite side for your testing
interface...less wear, less tear, less chance of
damage. It is available in all eight standard
The multi-matings and unmatings experienced MDM layouts. Mating hardware is available
by most connectors during testing and final
check out can be eliminated.
and can be ordered either separately or
included with the connector saver.
.790 (20.07) MAX.
.315
(8.00)
MAX.
.040 (1.02) MAX. ALLOWABLE
AXIAL FLOAT
JACKSCREW/JACKPOST BUSHING
(FOR REFERENCE ONLY SEE
ORDERING INFORMATION BELOW.)
#2-56 UNC-2A THD (9-51)
(TYP.)
MICROSOCKET
MICROPIN
CONNECTOR RECEPT
A
B
CONNECTOR, PLUG
BACKPOTTING, EPOXY
INTERFACIAL SEAL
.185 (4.70) MAX. (TYP.)
.090 (2.29) REF.
(TYP.)
C
.900 (22.86) REF.
E-RING (TYP.)
MDM Size 9 Shown
Electroless Nickel (A174) Plated
Cadmium over Nickel (A101) Plated
A
B
C
Size
9
With Hardware
W/O Hardware
MDM98479-18
MDM98479-19
MDM98479-20
MDM98479-21
MDM98479-14
MDM98479-15
MDM98479-16
MDM98479-17
With Hardware
MDM98479-78
MDM98479-79
MDM98479-80
MDM98479-81
MDM98479-82
MDM98479-83
MDM98479-84
MDM98479-85
W/O Hardware
MDM-97294-371
MDM-97294-372
MDM-97294-373
MDM-97294-374
MDM-97294-375
MDM-97294-376
MDM-97294-377
*Hardware Kits
Max.
.005 (0.13)
Max.
MDM98479-86
MDM98479-87
MDM98479-88
MDM98479-89
MDM98479-90
MDM98479-91
MDM98479-92
MDM98479-93
320-9505-014**
320-9505-014**
320-9505-014**
320-9505-014**
320-9505-014**
320-9505-014**
320-9505-014**
.785 (19.94)
.935 (23.75)
1.085 (27.56)
1.185 (30.10)
1.335 (33.91)
1.485 (37.72)
1.435 (36.45)
2.170 (55.12)
.565 (14.35)
.715 (18.16)
.865 (21.97)
.965 (24.51)
1.115 (28.32)
1.265 (32.13)
1.215 (30.86)
1.800 (45.72)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.91)
.394 (10.01)
15
21
25
31
37
51
100
MDM-97294-717 320-9508-014***
* Kit contains 2 jackpost/jackscrew bushings and 2 E-Rings.
** Size 9-51-#2-56 UNC-2B Thread
*** Size 100-#4-40 UNC-2B Thread
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
15
Micro-D Metal Shell - .050" Contact Spacing
83513-Style
How to Order - 83513-Style Part Number Nomenclature – Slash Sheets 1-9
M83513/ 01
-
H100 - * * * * * *
SERIES
MDM
MDB
MDVB
-
-
-
-
Metal Shell, Liquid Crystal Polymer (LCP)
Diallyl Phthalate Insulator
Polyester Insulator
83513-Style SLASH SHEET
01
02
03
04
05
06
07
08
09
-
-
-
-
-
-
-
-
-
Plug, Connector, Solderpot
Receptacle, Connector, Solderpot
Plug, Connector, Crimp Type
Receptacle, Connector, Crimp Type
Metal Shell
7
Hardware Only
Plug, Connector, Solderpot
Receptacle, Connector, Solderpot
Plug, Connector, Crimp Type
Receptacle, Connector, Crimp Type
Plastic
5
INSERT ARRANGEMENT
METAL SHELL
PLASTIC
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
100 Contact
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
A
B
C
D
E
F
G
H
-
-
-
-
-
-
-
-
5
WIRE TYPE
No Number - For Solderpot
01
02
03
-
-
-
18" long, #26 AWG per MIL-W-22759/11-26-9 (all white)
36" long, #26 AWG per MIL-W-22759/11-26-9 (all white)
18" long, #26 AWG per MIL-W-22759/11-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
36" long, #26 AWG per MIL-W-22759/11-26-
Color Coded per MIL-STD-681, System 1, 10 colors repeating
.5" long. #25 AWG, type S per QQ-W-343,
Gold Plated
1.0" long, #25 AWG, type S per QQ-W-343,
Gold Plated
.5" long, #25 AWG, type S per QQ-W-W-343,
Tin Plated
6
6
04
05
06
07
08
-
-
-
-
-
1.0" long, #25 AWG, type S per QQ-W-343,
Tin Plated
09
10
11
-
-
-
18" long, #26 AWG per MIL-W-22759/33-26-9 (all white)
36" long, #26 AWG per MIL-W-22759/33-26-9 (all white)
18" long, #26 AWG per MIL-W-22759/33-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
36" long, #26 AWG per MIL-W-22759/33-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
72" long, #26 AWG per MIL-W-22759/11-26-9 (all white)
72" long, #26 AWG per MIL-W-22759/11-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
72" long, #26 AWG per MIL-W-22759/33-26-9 (all white)
72" long, #26 AWG per MIL-W-22759/33-26
Color Coded per MIL-STD-681, System 1, 10 colors repeating
3
3
NOTES:
3
3
6
6
1
-
For every Mil Spec Part Number, ITT has one corresponding
part number shown an example
12
-
-
Tolerance on wire lengths: 18", 36" and 72" long —
+1.00"/-0.00"
2
13
14
-
-
.5" and 1.00" — + .200"/-.000"
-
-
For space application, connector shell finish must be "A174"
and wire must be per MIL-W-22759/33-26.
3
4
6
3
15
16
-
-
Any deviations to these P/N's will result in assignment of a
special P/N, consult factory.
3
6
Size 100 not available in / 06 through / 09. (Plastic shell)
-
-
5
6
Color coding in accordance with MIL-STD-681, System 1,
no parenthesis. See page 83 for color code chart.
SHELL FINISH
No number - for plastic type connector
C – for Cadmium/Yellow chromate over nickel
For mounting hardware to Military Specification (sizes 9 to 100)
see page 13.
-
7
N – A174 - Electroless Nickel A174
3
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
16
Micro-D Metal Shell - .050" Contact Spacing
83513-Style
How to Order - 83513-Style Part Number Nomenclature – Slash Sheets 10-27
M83513/
10
-
A
* *
C
*
SERIES
Connector, Electrical, Rectangular
Microminiature, Polarized Shell
PC Board Mounting
MIL-C-83513 SLASH SHEET
10 – Connector, Plug, Condensed Board Right Angle (CBR), Sizes 9 – 37
11 – Connector, Plug, CBR, Size 51
12 – Connector, Plug, CBR, Size 100
13 – Connector, Receptacle, CBR, Sizes 9 – 37
14 – Connector, Receptacle, CBR Size 51
15 – Connector, Receptacle, CBR, Size 100
16 – Connector, Plug, Board Right Angle (BR), Sizes 9 – 37
17 – Connector, Plug, BR, Size 51
18 – Connector, Plug, BR, Size 100
19 – Connector, Receptacle, BR, Sizes 9 – 37
20 – Connector, Receptacle, BR Size 51
21 – Connector, Receptacle, BR Size 100
22 – Connector, Plug, Board Straight (BS), Sizes 9 – 37
23 – Connector, Plug, BS, Size 51
24 – Connector, Plug, BS, Size 100
25 – Connector, Receptacle, BS, Sizes 9 – 37
26 – Connector, Receptacle, BS, Size 51
27 – Connector, Receptacle, BS Size 100
INSERT ARRANGEMENT
METAL SHELL
9 Contact
15 Contact
21 Contact
25 Contact
31 Contact
37 Contact
51 Contact
100 Contact
A
B
C
D
E
F
G
H
-
-
-
-
-
-
-
-
WIRE TYPE
No Number - For Solderpot
NOTES:
01
02
03
-
-
-
.109" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
.140" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
.172" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
-
1
For every Mil Spec Part Number, ITT has one
2
corresponding part number
-
Tolerance on wire lengths .015
2
-
-
For space application, connector shell finish must be "N".
3
4
SHELL FINISH
No letter - for plastic type connector
Any deviations to these P/N's will result in assignment
of a special P/N, consult customer service.
C - Cadmium / Yellow chromate over nickel
N - Electroless Nickel
3
3
HARDWARE
N - No jackpost
P - Jackpost (permanently attached)
T - Threaded insert
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
17
Micro-D PCB - .050" Contact Spacing
MDM-PCB
MDM-PCB connectors are designed for use
with flex circuitry, flat cable and printed circuit
boards or multi-layer boards. They use the
standard MDM metal shell and provide high
density and high reliability in board-to-board,
board-to-cable and cable-to-cable applications.
MDM-PCB connectors are available in 8 shell
sizes with 9 to 100 contacts. Terminations
may be straight (BS) or at 90˚ right angle (BR,
CBR) board thickness. Jackpost mounting for
use with locking hardware is also available.
How to Order - MDM-PCB Series
MDM *
-
25
P
BS
P
-
T
L39
A174
R
RoHS COMPLIANCE
SERIES
INSULATOR MATERIAL
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
MOUNTING HARDWARE (Shell Flange)
MOUNTING HARDWARE FOR PCB
TERMINATION TAIL LENGTH MODIFICATION CODE
SHELL FINISH MODIFICATION CODES
TERMINATION TAIL LENGTH MODIFICATION CODE
None - .109 (2.77) .015 (0.ꢀ3) Standard
L61 - .125 (ꢀ.13)
L56 - .150 (ꢀ.31)
L57 - .190 (4.3ꢀ)
SERIES
MDM - Micro "D" Metal Shell
TERMINATION TYPE
BS - Straight PCB Termination
BR - Right Angle PCB Termination
CBR - Right Angle Narrow Profile PCB Terminations
INSULATOR MATERIAL
Liquid Crystal Polymer (LCP)
MOUNTING HARDWARE (Shell Flange)
Lꢀ9 - .250 (6.ꢀ5)
P
- Jackposts
M7 - Jackposts
M3ꢀ51ꢀ/5-07 (Sizes 9-51)
L53 - .ꢀ75 (9.52)
CONTACT ARRANGEMENT
9, 15, 21, 25, ꢀ1, ꢀ7, 51, and 100
SHELL FINISH MODIFICATION CODES
None - Yellow Chromate/Cadmium over Nickel
A174 - Electroless Nickel
M17 - Jackposts
M3ꢀ51ꢀ/5-17 (Size 100)
No letter - none
CONTACT TYPE
P - Pin (Plug)
A172 - Gold over Nickel
A141 - Irridite/Alodine
Aꢀ0 - Black Anodize
S - Socket (Receptacle)
MOUNTING HARDWARE FOR PCB
T - Threaded Insert
#2-56 Thd for Shell Sizes 9 thru 51
#4-40 Thd for Shell Size 100
No letter - none
(For special modification codes, consult
customer service.)
NOTE: Back molding material –
Epoxy Hysol #MG40FS
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
18
Micro-D PCB - .050" Contact Spacing
MDM-PCB
BS (Board Straight) Series
I
B
ꢂ
E
C
.ꢁ86 (4.723 MIX. PLUG
.ꢁ98 (ꢀ.013 MIX. RECEPTICLE
F
G
K
J
CIV.
#ꢁ
H
LIST
CIV.
.096 .00ꢀ
(2.44 0.ꢁ13 ꢂDI.
Size 9-ꢀꢁ3
JICKPOST (9-ꢀꢁ3
#2-ꢀ6 UNC-2B TYP.
.ꢁ09 0.ꢁꢀ
(2.77 0.183
JICKPOST (ꢁ003
#4-40 UNC-2B TYP.
.ꢁ20 .00ꢀ
(1.0ꢀ 0.ꢁ13
Size ꢁ00
LIST CIV.
*
.ꢁ00 (2.ꢀ43
REF.
CIV. #ꢁ
PCB Termination Arrangements* (Viewed from PCB solder side)
Identification number shown for plug connector, use reverse order for socket connector.
NOTE: Dimensions shown are for reference only-consult factory for final design dimensions.
.0ꢀ0
(ꢁ.273
.0ꢀ0
(ꢁ.273
.0ꢀ0
(ꢁ.273
.0ꢀ0
(ꢁ.273
6
7
8
9
9 ꢁ0 ꢁꢁ ꢁ2 ꢁ1 ꢁ4 ꢁꢀ
ꢁ2 ꢁ1 ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁ8 ꢁ9 20 2ꢁ
ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁ8 ꢁ9 20 2ꢁ 22 21 24 2ꢀ
ꢁ
2
1
4
ꢀ
ꢁ
2
1
4
ꢀ
6
7
8
ꢁ
2
1
4
ꢀ
6
7
8
9
ꢁ0 ꢁꢁ
ꢁ
2
1
4
ꢀ
6
7
8
9 ꢁ0 ꢁꢁ ꢁ2 ꢁ1
.ꢁꢀ0
(1.8ꢁ3
.22ꢀ
(ꢀ.723
.17ꢀ
(9.ꢀ13
.22ꢀ
(ꢀ.723
TYP.
9 Contacts
15 Contacts
21 Contacts
25 Contacts
.0ꢀ0
(ꢁ.273
.0ꢀ0
(ꢁ.273
.ꢁ00
(2.ꢀ43
TYP.
16 17 18 19 40 4ꢁ 42 41 44 4ꢀ 46 47 48 49 ꢀ0 ꢀꢁ
ꢁ7 ꢁ8 ꢁ9 20 2ꢁ 22 21 24 2ꢀ 26 27 28 29 10 1ꢁ
20 2ꢁ 22 21 24 2ꢀ 26 27 28 29 10 1ꢁ 12 11 14 1ꢀ 16 17
ꢁ9
1ꢀ
ꢁ
2
1
4
ꢀ
6
7
8
9 ꢁ0 ꢁꢁ ꢁ2 ꢁ1 ꢁ4 ꢁꢀ ꢁ6
ꢁ
2
1
4
ꢀ
6
7
8
9
ꢁ0 ꢁꢁ ꢁ2 ꢁ1 ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁ8 ꢁ9
ꢁ
2
1
4
ꢀ
6
7
8
9 ꢁ0 ꢁꢁ ꢁ2 ꢁ1 ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁ8
.ꢁꢀ0
(1.8ꢁ3
.ꢁꢀ0
.ꢁꢀ0
(1.8ꢁ3
(1.8ꢁ3
31 Contacts
37 Contacts
51 Contacts
76 77
ꢀ2
78
79
80 8ꢁ 82
ꢀ6 ꢀ7
81
84
ꢀ9 60
14 1ꢀ
8ꢀ
16
86 87
88
19
89
40
90
4ꢁ
9ꢁ 92
67
91
94
9ꢀ
46
96 97
98
99
ꢀ0
ꢁ00
ꢀ1 ꢀ4
ꢀꢀ
1ꢁ
ꢀ8
8
6ꢁ
62
61
ꢁ1
64
ꢁ4
6ꢀ
ꢁꢀ
66
ꢁ6
68
69
70
7ꢁ
72 71
74
7ꢀ
27
28
29 10
12
11
17 18
42
41
44 4ꢀ
ꢁ9
47
48 49
21
ꢀꢁ
ꢁ
2
1
4
ꢀ
6
7
9
ꢁ0
ꢁꢁ ꢁ2
ꢁ7
ꢁ8
20
2ꢁ
22
24 2ꢀ
26
.ꢁꢀ0
(1.8ꢁ3
.ꢁꢀ0
(1.8ꢁ3
100 Contacts
NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)
Part Number
By Shell Size
MDM-9PBS*
A
Max.
1.390 (35.31)
B
C
D
Max.
.785 (19.94)
E
Max.
F
Max.
G
Max.
H
Max.
J
K
Max.
± ±..07 ±ꢀ18
1.150 (29.21)
± ±..ꢁ7 ±ꢀꢂ8
.565 (14.35)
Max.
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.30)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.460 (11.68)
.460 (11.68)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.165 (4.19) .355 (9.02)
.303 (7.70) .550 (12.70)
.303 (7.70) .550 (12.70)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.555 (14.10)
.686 (17.42)
.686 (17.75)
MDM-9SBS*
MDM-15PBS*
MDM-15SBS*
MDM-21PBS*
MDM-21SBS*
MDM-25PBS
MDM-25SBS*
MDM-31PBS*
MDM-31SBS*
MDM-37PBS*
MDM-37SBS*
MDM-51PBS*
MDM-51SBS*
MDM-100PBS*
MDM-100SBS*
1.390 (35.31)
1.390 (35.31)
1.390 (35.31)
1.690 (43.93)
1.690 (43.93)
1.740 (44.20)
1.740 (44.20)
2.040 (51.82)
2.040 (51.82)
2.340 (59.44)
2.340 (59.44)
2.270 (67.66)
2.270 (67.66)
3.070 (77.98)
3.070 (77.98)
1.150 (29.21)
1.150 (29.21)
1.150 (29.21)
1.450 (36.83)
1.450 (36.83)
1.500 (38.10)
1.500 (38.10)
1.800 (45.72)
1.800 (45.72)
2.100 (53.34)
2.100 (53.34)
2.000 (50.80)
2.000 (50.80)
2.800 (71.12)
2.800 (71.12)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
.785 (19.94)
.935 (23.75)
.935 (23.75)
1.085 (27.56)
1.085 (27.56)
1.185 (30.10)
1.185 (30.10)
1.335 (33.91)
1.335 (33.91)
1.485 (37.72)
1.485 (37.72)
1.435 (36.45)
1.435 (36.45)
2.175 (55.24)
2.175 (55.24)
*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
19
Micro-D PCB - .050" Contact Spacing
MDM-PCB
BR (Board Right Angle) Series
JACKPOST
#2-ꢀ6 UNC-2B TYP.
.1ꢁ6 (4.72)
MAX. PLUG
.19ꢁ (ꢀ.0ꢀ)
MAX.
A
C
B
.12ꢀ .01ꢀ
(3.1ꢁ 0.3ꢁ)
D
.109 .01ꢀ
(2.77 0.3ꢁ)
E
G
.100
(2.ꢀ4)
TYP.
F
CAV.
#1
LAST
CAV.
.0ꢀ0
(1.27)
TYP.
.096 .00ꢀ
(2.44 0.31)
.1ꢀ0 .010
(3.ꢁ 0.2ꢀ)
.100 TYP.
PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)
Identification number shown for plug connector, use reverse order for socket connector.
.1ꢀ0
(3.ꢁ1)
.1ꢀ0
(3.ꢁ1)
.1ꢀ0
(3.ꢁ1)
.1ꢀ0
(3.ꢁ1)
6
7
ꢁ
9
14 1ꢀ 16 17 1ꢁ 19 20 21 22 23 24 2ꢀ
9
10 11 12 13 14 1ꢀ
12 13 14 1ꢀ 16 17 1ꢁ 19 20 21
.300
1
2
3
4
ꢀ
6
7
ꢁ
9 10 11 12 13
1
2
3
4
ꢀ
1
2
3
4
ꢀ
6
7
ꢁ
1
2
3
4
ꢀ
6
7
ꢁ
9 10 11
(7.62)
.37ꢀ
(9.ꢀ3)
.22ꢀ
(ꢀ.72)
.17ꢀ
(4.4ꢀ)
15 Contacts
9 Contacts
25 Contacts
21 Contacts
.0ꢀ0
(1.27)
.1ꢀ0
(3.ꢁ1)
.1ꢀ0
(3.ꢁ1)
36 37 3ꢁ 39 40 41 42 43 44 4ꢀ 46 47 4ꢁ 49 ꢀ0 ꢀ1
19 20 21 22 23 24 2ꢀ 26 27 2ꢁ 29 30 31 32 33 34 3ꢀ
17 1ꢁ 19 20 21 22 23 24 2ꢀ 26 27 2ꢁ 29 30 31
20 21 22 23 24 2ꢀ 26 27 2ꢁ 29 30 31 32 33 34 3ꢀ 36 37
.1ꢀ0
(3.ꢁ1)
1
2
3
4
ꢀ
6
7
ꢁ
9 10 11 12 13 14 1ꢀ 16 17 1ꢁ
1
2
3
4
ꢀ
6
7
ꢁ
9
10 11 12 13 14 1ꢀ 16
.1ꢀ0
1
2
3
4
ꢀ
6
7
ꢁ
9
10 11 12 13 14 1ꢀ
1ꢁ 19
.11ꢀ6017
(3.ꢁ1)
(3.ꢁ1)
51 Contacts
37 Contacts
31 Contacts
.0ꢀ0
(1.27)
76 77 7ꢁ 79 ꢁ0 ꢁ1 ꢁ2 ꢁ3 ꢁ4 ꢁꢀ ꢁ6 ꢁ7 ꢁꢁ ꢁ9 90 91 92 93 94 9ꢀ 96 97 9ꢁ 99 100
ꢀ2 ꢀ3 ꢀ4 ꢀꢀ ꢀ6 ꢀ7 ꢀꢁ ꢀ9 60 61 62 63 64 6ꢀ 66 67 6ꢁ 69 70 71 72 73 74 7ꢀ
.1ꢀ0
27 2ꢁ 29 30 31 32 33 34 3ꢀ 36 37 3ꢁ 39 40 41 42 43 44 4ꢀ 46 47 4ꢁ 49 ꢀ0 ꢀ1
(3.ꢁ1)
1
2
3
4
ꢀ
6
7
ꢁ
9
10 11 12 13 14 1ꢀ 16 17 1ꢁ 19 20 21 22 23 24 2ꢀ 26
100 Contacts
NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dripped.
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).
Part Number
By Shell Size
A
Max.
B
C
D
Max.
E
Max.
F
Max.
G
Max.
.007 (.18)
.005 (.13)
MDM-9PBR*
MDM-9SBR*
MDM-15PBR*
MDM-15SBR*
MDM-21PBR*
MDM-21SBR*
MDM-25PBR*
MDM-25SBR*
MDM-31PBR*
MDM-31SBR*
MDM-37PBR*
MDM-37SBR*
MDM-51PBR*
MDM-51SBR*
MDM-100PBR*
MDM-100SBR*
1.390 (35.31)
1.390 (35.31)
1.540 (39.12)
1.540 (39.12)
1.690 (42.93)
1.690 (42.93)
1.790 (45.47)
1.790 (45.47)
2.040 (51.82)
2.040 (51.52)
2.340 (59.44)
2.340 (59.44)
1.875 (47.63)
1.875 (47.63)
2.74 (69.72)
2.74 (69.72)
1.150 (29.21)
1.150 (29.21)
1.300 (33.02)
1.300 (33.02)
1.450 (36.83)
1.450 (36.83)
1.550 (39.37)
1.550 (39.37)
1.800 (45.72)
1.800 (45.72)
2.100 (53.34)
2.100 (53.34)
1.600 (40.64)
1.600 (40.64)
2.500 (63.50)
2.500 (63.50)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.10)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.455 (11.56)
.565 (14.35)
.565 (14.35)
.755 (19.18)
.755 (19.18)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.394 (10.01)
.394 (10.01)
*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
20
Micro-D PCB - .050" Contact Spacing
MDM-PCB
CBR (Condensed Board Right Angle) Series
JACKPOST 2-56
UNC-2B TYP.
LAST
A
C
(Size 9-51)
E
CAV.
.109 .015
(2.77 0.38)
+
+
D
JACKPOST
.186 (4.72)
.185
#4-40 UNC 2B TYP.
CAV.
#1
MAX.PLUG
.198 (5.03)
(4.70)MAX.
C
B
MAX. RECEPT.
H
G
H
H
G
G
F
F
.096 .005
SEE
VIEW X
F
(2.44 0.31)
DIA.TYP.
.125 .005
SEE
(3.18 0.31)
DIA. TYP.
* *
VIEW Y
(Size 9-51)
* *FOR 31: 1.085(27.56) MAX.
FOR 37: 1.185(30.10) MAX.
FOR 51: 1.225(31.12) MAX.
1.815 (46.10) MAX.
SEE
VIEW W
100 VIEW
PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)
Identification number shown for plug connector, use reverse order for socket connector.
.108
.100 (2.54)
TYP.
.083
.083
.083 (2.11)
(2.73)
(2.11)
(2.11)
8
6
4
3
2
11 10
12
.020
7
5
4
2
10
6
5
3
2
8
.020
9
7
5
15
1
13 24 22
25 23 21
17
(0.51)
.020
8
6
12
3
1
9
7
4
1
5
4
2
1
11
17
14
(0.51)
14
20 19 18 16
(0.51)
15 14 13 11 10
9
21 20 19 18 16 15 13 12
.020
9
8
3
7
6
(0.51)
.050 (1.27)
TYP.
25 Contacts
View X
15 Contacts
View X
21 Contacts
View X
9 Contacts
View X
.325 (8.26)
.275 (6.98)
.183
(4.65)
.158 (4.00)
15 13 11
9
8
6
4
2
27
15 13 11
18 16 14 12 10
35 33 31 29 46 43 41 25 23 21 19
28 45 42 26 24 22 20
8
6
4
2
17
25 23 21
9
7
5
3
1
19
15 13 11
16 14 12 10
35 33 31
17
15 13 11
7
5
3
1
9
19 17
16 14 12 10 24
30 29 27 25 23 21 19 17
31 28 26 22 20 18
7
5
3
1
7
5
3
1
9
8
6
4
2
26 24 22 20 18
18 16 14 12 10
8
6
4
2
51 49 47 45 43 41 39
27
37
29
37 35 33 31
36 34 32 30
29
24
27 25 23 21
28 26
22 20
.050
50 48 46 44 42 40 38 36 34 32 30 28
75 73 71 69 67 65 63 61 59 57 55 53
34 32 30
.020
.020
(1.27)
51 50 49 48 47 44 40 39 38 37 36
(0.51)
(0.51)
.100 .005
74 72 70 68 66 64 62 60 58 56 54 52
.108
(2.54 0.13)
100 98 96 94 92 90 88 86 84 82 80 78 76
(2.73)
99 97 95 93 91 89 87 85 83 81 79 77
31 Contacts
View Y
37 Contacts
View Y
51 Contacts
View Y
100 Contacts
View W
NOTE: Standard lead termination is #24 AWG, solid copper,
solder or tin dripped.
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).
Part Number
By Shell Size
A
B
C
D
E
F
G
H
Max.
.005 (.13)
Max.
Max.
Max.
Max.
.010 (.25)
.010 (.25)
.230 (5.81)
.230 (5.81)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.150 (3.81)
.150 (3.81)
.200 (5.08)
.200 (5.08)
MDM-9PCBR*
MDM-9SCBR*
MDM-15PCBR*
MDM-15SCBR*
MDM-21PCBR*
MDM-21SCBR*
MDM-25PCBR*
MDM-25SCBR*
MDM-31PCBR*
MDM-31SCBR*
MDM-37PCBR*
MDM-37SCBR*
MDM-51PCBR*
MDM-51SCBR*
MDM-100PCBR*
MDM-100SCBR*
.785 (19.94)
.785 (19.94)
.935 (23.75)
.935 (23.75)
1.085 (27.56)
1.085 (27.56)
1.185 (30.10)
1.185 (30.10)
1.335 (33.91)
1.335 (33.91)
1.485 (37.72)
1.485 (37.72)
1.435 (36.45)
1.435 (36.45)
2.170 (55.12)
2.170 (55.12)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
1.800 (45.72)
1.800 (45.72)
.334 (8.48)
.402 (10.21)
.484 (12.29)
.552 (13.97)
.634 (16.10)
.702 (17.83)
.734 (18.64)
.802 (20.37)
.884 (22.45)
.952 (24.18)
1.034 (26.26)
1.102 (27.99)
.984 (24.99)
1.052 (26.72)
1.384 (35.15)
1.508 (38.10)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.308 (7.82)
.351 (8.92)
.351 (8.92)
.394 (10.01)
.394 (10.01)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.184 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.185 (4.70)
.253 (6.43)
.228 (5.79)
.296 (7.52)
.271 (6.88)
.394 (10.01)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.520 (13.21)
.520 (13.21)
.520 (13.21)
.520 (13.21)
.650 (16.15)
.650 (16.15)
1.000 (25.40)
1.000 (25.40)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.300 (7.62)
.300 (7.62)
.400 (10.16)
.400 (10.16)
*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
21
Micro-D Coaxial/Power - .050" Contact Spacing
MDM C/P
MDM Coaxial
MDM Power
The MDM Metal Shell Connectors have been
tooled in several coaxial layouts and offer the
versatility of combining coaxial and signal lines
in the same connector. Any modifications to
these layouts or new requirements, please con-
sult the factory. Standard coax is RG178 white.
The same insulator that is used with coaxial contacts is
available with power contacts. This offers the versatility of
combining power and signal lines in the same connector.
MDM Coaxial/Power
Power and coaxial contacts can be interchanged as
desired. Power contacts are rated at 13 amps, 24V rms,
AWG #16 stranded.
How to Order
For 83513-Style ordering information see pages 16 and 17
R
MDM
-
51
P
H
001
P
- XXX
RoHS COMPLIANCE
SERIES
SERIES
MDM: (Size 9-100) Liquid Crystal Polymer (LCP)
MDM: (Combo Layout) Diallyl Phthalate (DAP)
CONTACT ARRANGEMENTS
CONTACT TYPE
CONTACT ARRANGEMENTS
9-15-21-25-31-37-51-100 (standard)
16C5, 10C10, 7C2, 24C4 (coaxial)
TERMINATION TYPE
TERMINATION CODE
HARDWARE
16P5, 10P10, 7P2, 24P4 (power)
or combination of
coax and power
}
SHELL FINISH MOD CODES
CONTACT TYPE
P - Pin
S - Socket
(L) 1 - 1/2" uninsulated solid #25
AWG gold plated copper.
(L) 2 - 1" uninsulated solid #25 AWG
gold plated copper.
F - Float mount
B - No hardware standard
.091 (2.31) dia. hole for sizes 9-51;
.120 (3.05) dia. hole for size 100.
A - .125 (3.18) dia. mounting holes for sizes 9-51;
.166 (4.22) dia. hole for size 100.
B1 - .1475 (3.75) dia. hole for size 100
(Per 83513-Style)
TERMINATION TYPE
H - Harness-insulated wire.
L - Solid-uninsulated wire.
S - Solder pot to accept #26 AWG MAX.
harness wire. (Not available with power
contact arrangements.)
SHELL FINISH MOD CODES
No Number - (Standard cadmium/yellow
chromate over nickel
A174 - Electroless nickel
A172 - Gold over nickel
A141 - Irridite/alodine
HARDWARE
TERMINATION CODE*
M - Military specification hardware, see
page 11 for military hardware codes.
P - Jackpost
K - Jackscrew-standard profile
L - Jackscrew-low profile
(H) 001 - 18",7/34 strand,#26 AWG,
MIL-W-16878/4, Type E Teflon, yellow.
(H) 003 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681 System I.
A30 - Black anodize
*See page 79 and 81 for additional Termination codes.
7C2/7P2
.186 (4.92) MAX.
.199 (5.05) MAX.
1.185 (30.10) MAX.
1.185 (30.10) MAX.
308 (7.82)
.965 .005
.965 .005
(24.51 0.13)
MAX
(24.51 0.13)
.416 (10.57)
MAX.
.429 (10.90)
MAX.
.308 (7.82) MAX.
+
+
+
+
.100
(2.54)
MAX.
.100
(2.54)
MAX.
.800
(20.32)
MAX.
.800
(20.32)
MAX.
.091 .003
(2.31 0.08)
.091 .003
(2.31 0.08)
DIA.
DIA.
Plug
Receptacle
24C4/24P4
.186 (4.92)
MAX.
.199 (5.05)
MAX.
1.435 (36.45) MAX.
1.435 (36.45) MAX.
1.215 .005
(30.86 0.13)
1.215 .005
(30.86 0.13)
.351 (8.92)
MAX.
.351 (8.92)
MAX.
+
+
+
+
.100
(2.54)
MAX.
.429 (10.90)
MAX.
.416 (10.51)
MAX.
.100
(2.54)
MAX.
1.050
(26.67)
MAX.
.091 .003
(2.31 0.08)
.091 .003
(2.31 0.08)
DIA.
DIA.
1.050
(26.67)
MAX.
Plug
Receptacle
Power Contacts
Coaxial Contacts
BACK POTTING
REQUIRED
.350 (8.89)
MAX.
Plug
Receptacle
Plug
Receptacle
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
22
Microminiature Connectors
Hermetic-MDMH
MDMH connectors are ideal for applications
Features
requiring a better seal than can be achieved
with epoxy resins.
• Hermetically sealed connector designed for
those applications where a vacuum, inert
gas or a constant controlled pressure are
required to eliminate adverse effects creat-
ed by atmospheric changes.
The connector utilizes size 24 AWG contacts
that are compression glass sealed through a
steel shell and into a diallyl pthalate front end
insulator. An interfacial seal provides
environmental protection when mated. We
recommend MDMH receptacles be soldered
to the chassis or container for a completely
leak-proof joint.
• Steel shells to provide greater strength, pre-
vent chipping, cracking or breaking, offer
electro-magnetic (EMI) and RFI shielding.
• Silicone elastomer compression interfacial
seal to provide a moisture and humidity
seal between each contact and between
contacts and shell.
MDMH receptacles mate with standard MDM
plugs.
Specifications
Standard materials & finishes
Shell Mild steel, tin-lead plated
Insulator Glass filled diallyl phthalate per MIL-M-14. Type SDGF
Contacts Copper alloy, gold plated sockets on mild steel gold plated pins. Solder pots - mild steel gold plated
Hermetic seal Compression glass
Leak rate 1 micron cubic ft/hr max (1.04 x 10-5 cc/sec at 1 ATM pressure differential)
ELECTRICAL DATA
No. of contacts 9 to 100
Dielectric withstanding voltage 150 VAC
Insulation resistance 5000 Mohm minimum
Wire size #26 through #30 AWG
Contact termination Solder pot
MECHANICAL FEATURES
Size or length 8 sizes
Service class Hermetically sealed
Coupling Friction/jacks
Polarization Keystone shaped shells
Contact spacing .050 (1,27) centers
Shell style Receptacle, solder mount
How to Order
MDMH – 51
S
S
Hermetic Micro D Receptacle Series
Contact layout
9, 15, 21, 25, 31, 37, 51, 100
Socket Contacts (only)
Termination type
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
23
Microminiature Connectors
Hermetic-MDMH
Contact Arrangements
Face vew of socket insert - use reverse order for wiring side.
13 12 11 10
9
8
7
6
5
4
3
2
1
5
4
3
2
1
11 10
9
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
9
8
7
6
21 20 19 18 17 16 15 14 13 12
15 14 13 12 11 10
9
25 24 23 22 21 20 19 18 17 16 15 14
9 Contacts
21 Contacts
15 Contacts
25 Contacts
18 17 16 15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
19 18 17 16 15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
16 15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19
37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36
31 Contacts
37 Contacts
51 Contacts
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
100 Contacts
Contact identification numbers are for reference only and do not appear on insulator or connector body.
Shell Dimensions
6,61
(.260)
MAX
A
B
F
4,58
(.180)
MAX
D
G
E
2 HOLES 2-56 UNC (9-51 WAY)
4-40 UNC (100 WAY)
5,06 (.199) MAX
1,93
(.076)
MAX
C
Part Number
by shell size
A
max
B
max
C
max
D
max
E
max
F
G
max
.005 (0,13)
MDMH-9S
.885 (22,48)
1.035 (26,29)
1.185 (30,10)
1.285 (32,64)
1.435 (36,45)
1.585 (40,26)
1.535 (38,99)
2.275 (57,78)
.738 (18,74)
.888 (22,55)
1.038 (26,36)
1.137 (28,87)
1.288 (32,72)
1.438 (36,53)
1.388 (35,26)
2.078 (52,78)
.400 (10,16)
.550 (13,97)
.770 (17,78)
.800 (20,32)
.950 (24,13)
1.100 (27,94)
1.050 (26,67)
1.455 (36,97)
.270 (6,86)
.270 (6,86)
.270 (6,86)
.270 (6,86)
.270 (6,86
.270 (6,86)
.310 (8,00)
.365 (9,27)
.430 (10,92)
.430 (10,92)
.430 (10,92)
.430 (10,92)
.430 (10,92)
.430 (10,92)
.473 (12,01)
.522 (13,26)
.565 (14,35)
.715 (18,16)
.865 (21,97)
.965 (24,51)
1.115 (28,32)
1.265 (32,13)
1.215 (30,86)
1.800 (45,72)
.261 (6,63)
.261 (6,63)
.261 (6,63)
.261 (6,63)
.261 (6,63)
.261 (6,63)
.315 (8,00)
.410 (10,41)
MDMH-15S
MDMH-21S
MDMH-25S
MDMH-31S
MDMH-37S
MDMH-51S
MDMH-100S
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
24
Microminiature Connectors
Filter-TMDM
With an increasing number of MDM connec-
Features
tors being used in avionics and military equip-
ment and with increasing emphasis being put
on EMI, RFI and EMP shielding, Cannon have
developed a range of filter connectors to suit
most applications.
•
Transverse monolith filter for EMI and RFI
shielding.
•
•
•
•
Rugged aluminum one piece shell.
Silicone interfacial environmental seal.
Glass filled diallyl phthalate insulator.
A variety of filter types for each pin.
The TMDM receptacle accommodates from 8
to 37 sizes, 24 AWG socket contacts on 1,27
(.050) centres and mates with the standard
MDM plugs.
Specifications
Standard materials & finishes
Shell Aluminum alloy per QQ-A-200/8 with electroless nickel finish per QQ-N-290
Insulator Glass filled diallyl phthalate per MIL-M-14. Type SDGF
Contact, socket Copper alloy, 50 microinch gold per MIL-G-45204, Type ll, Class l
Interfacial seal Silicone base rubber
ELECTRICAL DATA
No. of contacts 9 to 37
Dielectric withstanding voltage 300 VAC
Insulation resistance 5000 Mohm at 100 VDC
Voltage rating (working) 100 VDC
Current rating 3 amps max.
Maximum capacitance 250, 500, 1000, 2000 picofarads
Filter type
C
MECHANICAL FEATURES
Size or length 6 sizes
Coupling Friction/jackscrews
Polarization Keystone shaped shell
Contact spacing .050 (1,27) centers
Shell style Single piece receptacle
How to Order
TMDM – C1 15
S
H
001 B-
*
Series
Filter type
Number of contacts
Contact style
Termination type
Termination/modifier code
Mounting code
Modification code
Series:
Termination type:
low profile
Filter TMDM - Micro “D” - Metal housing
H - harness, insulated solid or stranded wire
L - lead, solid uninsulated wire
M3 - Allen head jackscrew assembly,
high profile
Filter type:
M5 - Slot head jackscrew assembly,
low profile
“C” capacitor type
Termination:
C1
C2
C3
C4
150 - 250 pF capacitance
300 - 500 pF capacitance
700 - 1000 pF capacitance
1300 - 2000 pF capacitance
Consult standard wire termination code for lead
material and lead length
M6- Slot head jackscrew assembly,
high profile
M7 - Jacknut assembly
P - Jackpost
Mounting code:
A - Flange mounting, Ø.125 (3,18)
mounting holes
Number of contacts:
Modification code:
B - Flange mounting, Ø.092 (2,34)
mounting holes
9, 15, 21, 25, 31, 37 only
Shell finish MOD. Codes. *
To be assigned as required
Contact style:
L - Low profile (slotted head)
M2 - Allen head jackscrew assembly,
S - socket (receptacle)
P - Pin (plug)
* No number = Standard tin/lead finish
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
25
Microminiature Connectors
Filter-TMDM
Guaranteed Minimum Attenuation
Filter
designation
Capacitance
range (pF)
Minimum Insertion Loss-decibels
10 MHz
15 MHz
30 MHz
50 MHz
100 MHz
200 MHz
500 MHz
1 GHz
35
C1
C2
C3
C4
150 - 250
300 - 500
4
6
6
15
18
25
30
20
25
38
40
3
7
12
17
23
40
700 - 1000
1300 - 2000
3
8
13
18
48
5
13
50
Standard Wire Termination Codes
Cannon Modification Codes – (Not Mil Spec)
The following termination codes are listed for your information. For additional codes
please refer to Appendix on page 79 and 81. All wire lengths are minimum.
Harness Type (H) #26 AWG per
Solid Uninsulated Type (L)
MIL-W-16878/4 Type E Teflon, stranded
#25 AWG gold plated copper.
Code
L61
L56
L57
L39
L58
L1
Length
.125 (.18)
Length
All Yellow Color Coded
3
6
8
(76.2)
(152.4)
(203.2)
H020
H019
H026
H029
H028
H001
H038
H009
H010
H011
H013
H017
H042
H027
H016
H034
H025
H002
H003
H023
H004
H005
H006
H048
H046
H041
.150 (3.81)
.190 (4.83)
.250 (5.35)
.375 (9.52)
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
24 (509.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.8)
120 (3048.0)
L14
L2
L7
L6
L6
L10
Shell Dimensions
A
F
B
5,06
(.199)
MAX
7,60
(.299)
MAX
10,90
(.500)*
MAX
E
G
D
2 HOLES
Ø2,32 (.091)
0,08 (.003)
C
ve)
Part Number
by shell size
A
max
B
max
C
max
D
max
E
max
F max
0,13 (.005)
G
max
MDMT-9S*
MDMT-15S*
MDMT-21S*
MDMT-25S*
MDMT-31S*
MDMT-37S*
.785 (19,94)
.935 (23,75)
1.085 (27,60)
1.185 (30,10)
1.335 (33,90)
1.485 (37,70)
.400 (10,16)
.400 (10,16)
.550 (13,97)
.700 (17,78)
.800 (20,32)
.950 (24,13)
1.100 (28,00)
.270 (6,86)
.270 (6,86)
.270 (6,86)
.270 (6,86)
.270 (6,86)
.270 (6,86)
.308 (7,83)
.308 (7,83)
.308 (7,83)
.308 (7,83)
.308 (7,83)
.308 (7,83)
.565 (14,36)
.715 (18,17)
.865 (21,98)
.965 (24,52)
1.115 (28,30)
1.265 (32,20)
.251 (6,38)
.251 (6,38)
.251 (6,38)
.251 (6,38)
.251 (6,38)
.251 (6,38)
.550 (13,97)
.700 (17,78)
.800 (20,32)
.950 (24,13)
1.100 (28,00)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
26
Microminiature Connectors
Filter-TMDM
Typical Filter Performance
70
60
50
40
30
20
10
1300-2000 pF
700-1000 pF
300-500 pF
150-250 pF
0
1
10
100
FREQUENCY (MHz)
1000
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
27
Micro-D Plastic Shell - .050" Contact Spacing
MD**
Microminiature Rectangular Connectors
with MICRO-Pin Contacts on .050 (1.27)
centers.
ITT can also terminate a wide variety of
stranded or solid wire directly to MICRO-D
contacts, which is often desirable in high den-
sity arrangements.
• Glass-filled diallyl phthalate thermoset
material used in high temperature applica-
tions that is immune to cleaning solvents.
It also has excellent dielectric properties.
Temperature range: -65˚F to +300˚F
(-55˚C to +149˚C).
MICRO-D microminiature rack/panel connec-
tors are used in applications requiring highly
reliable, extremely small, lightweight connec-
MICRO-D connectors can also be custom har-
nessed to meet any customer requirement of
tors. These connectors are available in 2 insu- single or multiple connectors. Pigtail lead and
• Glass-filled polyester thermoplastic that is
not affected by cleaning solvents and
exhibits excellent dielectric properties.
Temperature range: -55˚F to +257˚F
(-65˚C to +125˚C).
lator materials, 2 mounting variations, 7 shell
sizes accommodating from 9 to 51 contacts
harness description must be given by the cus-
tomer. A typical description would be: .5" #25
and a special arrangement of 5 micro contacts AWG, gold plated copper leads or 18" of #26
and 2 coaxials. The insulator materials listed
give the MICRO-D connector wide versatility
in most applications required by industry.
yellow, Teflon-insulated, Type E wire. Shown
below are various methods of termination.
Consult customer service for any routine or
complex harnessing of MICRO-D connectors.
Specifications
MATERIALS AND FINISHES
ELECTRICAL DATA
Shell/Insulator (One Piece) MD/MDB: Glass-filled
thermoset plastic
No of Contacts
- 9 to 51: (1 arrangement of 5
contacts and 2 coaxials - for
screw mount only)
MDV/MDVB:
Thermoplastic
Coaxial Cable
Wire Size
- RG-178/U (Not available for
MD clip mount)
- #24 thru #32 AWG
Contacts
- Copper alloy, gold plate
Contact Termination - Multi-indent crimp
MECHANICAL FEATURES
Size or Length
Coupling
- 7 sizes
- Friction/jackscrews
- Keystone-shaped shells
-.050 (1.27mm)
Polarization
Contact Spacing
Centers
Shell Styles
- Plug and receptacle
Consult factory for availabilty.
How to Order
MD**
1-
9
P
H
001
P
R
PCB ordering information - page 30
RoHS COMPLIANCE
SERIES-INSULATOR STYLE-MATERIAL
CONTACT SPACING
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODE
LOCKING HARDWARE
SERIES-INSULATOR STYLE-MATERIAL
MDB - Screw mounting-Diallyl phthalate
MDVB - Screw mounting-Polyester
TERMINATION TYPE
LOCKING HARDWARE (SCREW MOUNTING ONLY)
P - Jackpost
K - Jackscrew-standard
H - Insulated solid or stranded wire
L - Uninsulated solid wire
L - Jackscrew-low profile
F - Float mount
M - Military specification hardware, see page 13.
S - Solder pot to accept #26 AWG max.
harness wire.
CONTACT SPACING
1 - .050 (1.27) centers
TERMINATION CODE
CONTACT ARRANGEMENT
See page 79 and 81 for additional codes
No designator - No hardware - standard mounting
.091 (2.31) hole diameter
9-15-21-25-31-37-51. See page 9
(H) 001 - 18", 7/34 strand, #26 AWG,
CONTACT TYPE
MIL-W-16878/4, Type E Teflon, Yellow.
P - Pin
S - Socket
(H) 003 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon, color
coded to MIL-STD-681 System I.
(L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper.
(L) 2 - 1" uninsulated solid #25 AWG gold plated copper.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
28
Micro-D Plastic Shell - .050" Contact Spacing
MDB/MDVB
Standard Wire Termination Codes
The following termination codes are listed for your information. For additional codes please refer to Appendix
on page 79 and 81. All wire lengths are minimum.
Harness Type (H)
Solid Uninsulated Type (L)
#25 AWG Gold Plated Copper
Termination Code
#26 AWG per MIL-W-16878 Type E Teflon, stranded.
Length
3 (76.2)
All Yellow
H020
H019
H026
H029
H028
H001
H038
H009
H010
H011
H013
H017
H042
Color Coded*
H027
Length
.125 (3.18)
L61
L56
L57
L39
L58
L1
6 (152.4)
H016
.150 (3.81)
8 (203.2)
H034
.190 (4.83)
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.8)
120 (3048.0)
*Cavity #1 black
H025
.250 (6.35)
H002
.375 (9.52)
H003
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
H023
L14
L2
H004
H005
L7
H006
L6
H048
L16
L10
H046
H041
With Screw Mounting Holes (Conforms to 83513-Style)
Glass-filled Diallyl Phthalate
Plastic Insulator
Glass-filled Polyester
Plastic Insulator
MDB
MDVB
B
.110
(2.79)
MAX.
.204 (5.18)
MAX.
.304 (7.72)
MAX.
TWO MTG. HOLES .091 .003
(2.31 0.08)
.395 (10.03)
MAX.
D
F
.200
(5.08)
MAX.
.100 (2.54)
MAX.
C
+
+
E
Solder Pot
A
.154
(3.91)
MAX.
.185 (4.70)
MAX.
B
F
.285 (7.24)
MAX.
D
.375 (9.92)
MAX.
+
+
E
.200
(5.08)
Solder PotMAX.
.100 (2.54)
MAX.
C
A
Avg.
Weight***
05 ꢁ(z.ꢂ
05 ꢁgm.ꢂ
A
Max.
B
Max.
C
Max.
D
Max.
E
Max.
F
.ꢀꢀ0
Part Number by Shell Size
MDB1-9P**
MDB1-9S**
MDB1-10P**
MDB1-10S**
MDB1-21P**
MDB1-21S**
MDB1-20P**
MDB1-20S**
MDB1-31P**
MDB1-31S**
MDB1-37P**
MDB1-37S**
MDB1-01P**
MDB1-01S**
MDVB1-9P**
.788 (20.02)
.788 (20.02)
.938 (23.82)
.938 (23.82)
1.088 (27.64)
1.088 (27.64)
1.188 (30.18)
1.188 (30.18)
1.338 (33.98)
1.338 (33.98)
1.488 (37.80)
.292 (7.42)
.380 (9.65)
.408 (10.36)
.408 (10.36)
.588 (14.17)
.588 (14.17)
.708 (17.98)
.708 (17.98)
.808 (20.56)
.808 (20.56)
.958 (24.33)
.958 (24.33)
1.108 (28.14)
1.108 (28.14)
1.058 (26.87)
1.058 (26.87)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.173 (4.39)
.220 (5.59)
.220 (5.59)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.260 (6.60)
.260 (6.60)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (38.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
.026 (0.73)
.025 (0.70)
.038 (1.10)
.035 (1.00)
.053 (1.50)
.050 (1.40)
.063 (1.80)
.056 (1.60)
.080 (2.30)
.073 (2.10)
.086 (2.45)
.076 (2.15)
.109 (3.10)
.093 (2.64)
MDVB1-9S**
MDVB1-10p**
MDVB1-10S**
MDVB1-21P**
MDVB1-21S**
MDVB1-20P**
MDVB1-20S**
MDVB1-31P**
MDVB1-31S**
MDVB1-37P**
MDVB1-37S**
MDVB1-01P**
MDVB1-01S**
.442 (11.23)
.530 (13.46)
.592 (15.04)
.680 (17.27)
.692 (17.58)
.780 (19.81)
.842 (21.39)
.930 (23.62)
.992 (25.20)
1.488 (37.80) 1.080 (27.43)
1.438 (36.52) .942 (23.93)
1.438 (36.52) 1.030 (26.16)
** Add lead type and length, see Part Number Explanation.
*** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
29
Micro-D Plastic Shell - .050" Contact Spacing
MD*B-PCB
Jackpost mounting for use with locking hard-
ware is also available.
MD*B-PCB connectors use standard MD*B all
plastic shells and are designed for use with
flex circuitry, printed circuit and multi-layer
boards. They are easily mounted and soldered
and provide high density/high reliability in
board-to-board and board-to-cable applica-
tions. While being similar to the MDM-PCB
connectors, the MD*B-PCB connectors are all
plastic, extremely small, and lightweight yet
rugged enough for use in the most demanding
applications.
If the connectors shown in the catalog do
not meet the requirements of your applica-
tions, a special shape, size or layout using
the basic all plastic shell can be made avail-
able. For further technical and applications
information, contact customer service.
MD*B-PCB connectors are available in
seven shell sizes with 9 to 51 contacts in the
popular 90° narrow profile PCB termination,
with a variety of tail lengths for varying board
thickness.
How to Order
MD*B
-
37
S
CBR * L39
-
* * *
R
RoHS COMPLIANCE
SERIES
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
HARDWARE
TERMINATION TAIL LENGTH
MODIFICATION CODES
(Consult Factory)
CONNECTOR SERIES
HARDWARE
P = Jackpost
MDVB, MDB
M7 = Jackposts, M635135-07
No Letter = Less Hardware
CONNECTOR ARRANGEMENT
9, 15, 21, 25, 31, 51
TERMINATION TAIL LENGTH CODES
CONTACT TYPE
S = Socket
P = Pin
NONE – .109 (2.77) 0.15 (0.38) Standard
L61
L66
L57
L39
L58
– .125 (3.18)
– .150 (3.81)
– .190 (4.83)
– .250 (6.35)
– .375 (9.52)
TERMINATION TYPE
CBR = 90° Narrow Profile PCB Terminations
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
30
Micro-D Plastic Shell - .050" Contact Spacing
MD*B-PCB
CBR Series (90˚ Mounting Narrow Profile)
LAST
CAV
JACKPOST 2-56 UNC-2B
TYP.
A
C
.109 +_ .015
(3.77 +_ 0.38)
+
+
E
D
H
CAV.
#1
G
B
F
.186 (4.72) PLUG
.199 (5.05) RECEPTACLE
*
* FOR 31: 1.085 (27.56) MAX.
FOR 37: 1.185 (30.10) MAX.
FOR 51: 1.225 (31.12) MAX.
G
H
F
.096 +_ .005
(2.44 +_ 0.31) DIA. TYP
9-15-21-25 VIEW
PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.)
Indentification number shown for plug connector, use reverse order for socket connector.
.083
.108
.100 (2.54)
TYP.
.083
.083 (2.11)
(2.11)
(2.73)
(2.11)
4
3
2
11 10
8
6
12
.020
10
6
5
3
2
8
7
5
4
2
.020
9
7
5
15
1
13 24 22
25 23 21
17
(0.51)
9
7
4
1
11
17
14
5
4
2
1
8
6
12
3
1
(0.51)
14
20 19 18 16
21 20 19 18 16 15 13 12
15 14 13 11 10
9
.020
(0.51)
.020
9
8
3
7
6
(0.51)
.050 (1.27)
TYP.
9 Contacts
25 Contacts
21 Contacts
15 Contacts
27
15 13 11
18 16 14 12 10
8
6
4
2
17
7
5
3
1
9
.158 (4.00)
15 13 11
9
8
6
4
2
.183
(4.65)
35 33 31
34 32 30
25 23 21
19
29 46 43 41
.050
16 14 12 10 24
30 29 27 25 23 21 19 17
31 28 26 22 20 18
7
5
3
1
28 45 42 26 24 22 20
15 13 11
7
5
3
1
9
19 17
(1.27)
51 50 49 48 47 44 40 39 38 37 36
18 16 14 12 10
8
6
4
2
.108
37 35 33 31
36 34 32 30
29
24
27 25 23 21
28 26
22 20
.020
(2.73)
(0.51)
.020
51 Contacts
31 Contacts
(0.51)
37 Contacts
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)
Part Number
By Shell Size
A
B
C
D
E
F
G
H
Max.
.005 (0.13)
Max.
Max.
Max.
Max.
.010 (0.25)
.010 (0.25)
.230 (5.84)
.230 (5.84)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.150 (3.81)
.150 (3.81)
MD*B-9PCBR*
MD*B-9SCBR*
MD*B-15PCBR*
MD*B-15SCBR*
MD*B-21PCBR*
MD*B-21SCBR*
MD*B-25PCBR*
MD*B-25SCBR*
MD*B-31PCBR*
MD*B-31SCBR*
MD*B-37PCBR*
MD*B-37SCBR
MD*B-51PCBR*
MD*B-51SCBR
.788 (20.01)
.788 (20.01)
.938 (23.82)
.938 (23.82)
1.088 (27.63)
1.088 (27.63)
1.188 (30.17)
1.188 (30.17)
1.338 (33.98)
1.338 (33.98)
1.488 (37.79)
1.488 (37.79)
1.438 (36.52)
1.438 (36.52)
.565 (14.35)
.565 (14.35)
.715 (18.16)
.715 (18.16)
.865 (21.97)
.865 (21.97)
.965 (24.51)
.965 (24.51)
1.115 (28.32)
1.115 (28.32)
1.265 (32.13)
1.265 (32.13)
1.215 (30.86)
1.215 (30.86)
.292 (7.42)
.375 (9.52)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.258 (6.55)
.258 (6.55)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.134 (3.40)
.218 (5.54)
.177 (4.50)
.258 (6.55)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.420 (10.67)
.520 (13.21)
.520 (13.21)
.550 (13.97)
.550 (13.97)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.300 (7.62)
.300 (7.62)
.442 (11.23)
.525 (13.34)
.592 (15.04)
.675 (17.14)
.692 (17.58)
.775 (19.68)
.842 (21.39)
.925 (23.50)
.994 (25.25)
1.075 (27.30)
.942 (23.93)
1.026 (26.06)
* For jackpost locking add letter "P" or "M7".
NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
31
Micro-D Plastic Shell - .050" Contact Spacing
MDB Coaxial
MDB Coaxial Series with Screw Mounting Holes
MDB connectors with two coaxial and five MICRO-
PINTM /MICROSOCKETTM contacts. Crimp-type coaxial
contacts accommodate RG-178/U cables. A plastic
insertion/extraction tool is supplied with each connec-
tor assembly having removable coaxial assembly.
How to Order - MDB Coaxial
MDB
1
-7 C2
*
S
H
* *
*
K
R
RoHS COMPLIANCE
SERIES
SIGNAL CONTACT SPACING
TOTAL CONTACT CAVITIES
NUMBER OF COAXIALS
COAXIAL TYPE
SIGNAL CONTACT TYPE
SIGNAL CONTACT LEAD TYPE
SIGNAL CONTACT LEAD LENGTH
MODIFICATION
HARDWARE
COAXIAL TYPE
SERIES
Micro-D Coaxial
SIGNAL CONTACT LEAD LENGTH
See Standard Wire Termination
No Letter - Coaxial assembly
installed and nonremovable
RO - coaxial assembly ordered
serparately
Code on page 29. Coaxial cable will be
RG-178U unless otherwise specified; length
will be same as wire modification.
SIGNAL CONTACT SPACING
1 - .050 (1.27) centers
RA - Coaxial shipped assembled
but uninstalled
TOTAL CONTACT CAVITIES
. . . . . . . . . . . . . . . . . . .7
MODIFICATION
Consult customer service
. . . . . . . . . . . . . . . . . . . . . 2
NUMBER OF COAXIALS
SIGNAL CONTACT TYPE
HARDWARE
No letter - No hardware
P - Pin
S - Socket
standard mounting. 091 (2.31) hole diameter
F - Float
K - Jackscrew (standard)
L - Jackscrew (low profile)
P - Jackpost
SIGNAL CONTACT LEAD TYPE
L - Uninsulated, solid wire
H - Insulated, solid or stranded
S -Solder pot*
* Not available with removalbe coax cable type
connectors RO and RA.
How to Order - Coaxial Cable Assemblies
MD
CC
S
*
* * *
R
RoHS COMPLIANCE
SERIES
COAXIAL CABLE
CONTACT TYPE
COAXIAL CABLE TYPE
COAXIAL CABLE LENGTH
SERIES
COAXIAL CABLE LENGTH
See Standard Wire Termination
CONTACT TYPE
P - Pin
MD
COAXIAL CABLE
CC
Codes on page 29. Coaxial cable will be
RG-178U unless otherwise specified; length
will be the same as wire modfication.
(used with socket side connection)
S - Socket
(used with pin type connection)
COAXIAL CABLE TYPE
1 - RG178/U
Dimensions shown in inch (mm)
www.ittcannon.com
32
Micro-D Plastic Shell - .050" Contact Spacing
MDB Coaxial
Dimension - MDB Coaxial Series
(See page 9 for layouts)
A
TWO MTG. HOLES
B
C
.091 +_ .003 (2.31 +_ 0.08) DIA.
.190 (4.83) Max.
Plug
E
E1
.250 (6.35) MAX.
+
+
.625 (15.88)
MAX.
EXTENSION FOR
RO AND RA
COAXES
D
1.000 (25.40) MAX.
Receptacle
A
TWO MTG. HOLES
.190 (4.83) Max.
.091 +_ .003 (2.31 +_ 0.08) DIA.
B
C
E
E1
.250 (6.35) MAX.
+
+
.625 (15.88)
MAX.
EXTENSION FOR
RO AND RA
COAXES
D
1.000 (25.40) MAX.
Part Number
A
B
C
D
E
E1
Avg. Weight**
(oz) +_ 5% (gm.) +_ 5%
.290 (8.30)
by Shell Size
MDB1-7C2P*
MDB1-7C2S*
Max.
Max.
Max.
+_ .005 (0.13)
.782 (19.86)
.782 (19.86)
Max.
Max.
.510 (12.95)
.602 (15.29)
.204 (5.18)
.185 (4.70)
.298 (7.57)
.279 (7.09)
.395 (10.03)
.375 (9.52)
.510 (12.95)
.540 (13.72)
.273 (7.80)
* Add lead type and length, see Part Number Explanation.
** Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
33
Micro-D Plastic Shell - .050" Contact Spacing
MD
Mounting Hardware Views (Sizes 9-51)
This hardware supplied unassembled.
LOCK
SCREW
RETAꢁNꢁNG
CLꢁP
MATꢁNG
FACE
#2-06 UNC-2B
.4ꢀ8 (1ꢀ.36)
MAX.
.180 (4.7ꢀ) MAX.
.182 (4.62)
MAX.
CONNECTOR
SHOWN FOR
REF. ONLY
.688 (17.48)
MAX.
PANEL REF.
.0ꢀꢀ
(12.7)
MAX.
BUSHꢁNG
.ꢀ93 (2.36)
Screw Lock Assembly
.232 (0.89) MAX.
RECOMMENDED
#2-06 UNC-2A
PANEL THꢁCKNESS
Jackpost - (P)
.ꢀ02
Screw Lock Assembly*
(1.32) TYP.
#2-06
UNC-2B
THD
.26ꢀ
(6.6ꢀ) MAX.
.178 .ꢀꢀ0
(4.02 ꢀ.13)
.ꢀ96 .ꢀꢀ0
(2.44 ꢀ.13)DꢁA.
.17ꢀ
(4.32) MAX.
90˚ Angle Mounting Bracket
B
A
90˚ Angle Mounting Bracket
*NOTE: Torque value is 4.0 in/lbs max.
A
B
Max.
.005 (0.13)
Description
Part Number
Screw Lock Assembly
Jackpost Kit
322-9500-000
320-9505-000
Mounting Bracket, 90˚ Angle-
MD*1
015-9516-000
015-9516-000
.100
.215
for 9 thru 37 Shell Sizes
(2.54)
(5.46)
MD*1
for 51 Shell Size
.122
(3.10)
.257
(6.53)
NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit
(320-9505-000) consists of 2 assemblies, shipped unassembled.
This hardware is factory installed.
HEX HEAD -
MATING
FACE
CONNECTOR
SHOWN FOR
REF ONLY
.014 +_ .004
CONNECTOR
SHOWN FOR
REF. ONLY
.050 (1.27) ACROSS FLATS
.050 (1.27) DEEP (REF)
(0.36 +_ 0.10) ALLOWABLE
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.150 +_ .003
.490
(3.81 +_ .076)
(12.45) MAX
.155
(3.94) MAX.
.185 (4.70)
.093
MAX
(2.36)
REF.
PART HAS A .040 (1.02)
MAX. AXIAL FLOAT
#2-56
.090 +_ .0015
MATING
FACE
.031 +_ .003
(2.29 +_ 0.038)DIA
PART HAS A .040 (1.02)
MAX AXIAL FLOAT
#2-56
(0.79 +_ 0.08)
MATING
FACE
UNC-2A
UNC-2A
Float Mount - (F)
Jackscrew - (L) Low Profile
Jackscrew - (K) Standard
Shown here is a cutaway view of the float mount for the MD connector.
The basic shell dimensions are the same for the float mount and the
screw mounting hole configurations. View shown is for standard float
mount front panel mounting. Reverse mounting is available on request.
* NOTE: Torque values are as follows:
Low Profile Jackscrew (L)-2.5 in/lbs
Standard Jackscrew (K)-2.5 in/lbs
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
34
Micro-D Plastic Shell - .050" Contact Spacing
MD
Mounting Hardware to Military Specification (Sizes 9 - 51) PER 83513/5-Style
This hardware supplied unassembled.
PLUG (REF. WITH
#2-56 UNC-2A
THREAD TYP.
.092 (2.34) DIA.
#2-56 UNC-2A
THREAD TYP.
PLUG (REF.) WITH
.092 (2.34) DIA.
.125 (3.18) HEX
#2-56 UNC-2B Thread
MOUNTING HOLES
MOUNTING HOLES
.190 (4.83)
.010 (0.25)
TH'K (REF.)
+_ .185 (4.70)
.361 (9.17)
MAX.
.475 (12.06)
0.25 (0.64)
.062 (1.57)
.010 (0.25)
.062 (1.57)
POTTING WELL
(REF.)
HEX. (REF.)
.010 (0.25)
TH'K (REF.)
POTTING WELL (REF.)
Jackscrew - (L) Low profile *
LOCK WASHER
RETAINING NUT
.154 (3.91) HEX.
Allen head
Optional Head Configuration
Plug and Receptacle
# 2-56 UNC-2A
Thread
Jackpost Assembly
Jackscrew - (K) High Profile
Low and High Profile
Slotted Head
Description
M83513/5-Style
Mode Code
Part Number
320-9508-025
320-9508-027
320-9508-026
320-9508-028
320-9505-033
Slotted Head Jackscrew Assy Low Profile
Slotted Head Jackscrew Assy High Profile
Allen Head Jackscrew Assy Low Profile
Allen Head Jackscrew Assy High Profile
Jackpost Assy
-05
-06
-02
-03
-07
M5
M6
M2
M3
M7
Jackpost Bushing (For Rear Panel Mounting)
HEX IS .135 (3.431/.115 (2.92) ACROSS FLATS
#2-56 UNC 2B THD
.170 (4.32)
.185 (4.70)
+ .005 (0.13)
.075 (1.91)
- .000 (0.00)
R TYP.
MATING FACE
C
A
.126 (3.20)
A
.125 (3.18)
DIA.TYP.
B
+
+
.500 (12.7)
.480 (12.19)
27˚/26˚TYP
#2-56 UNC
2A THD
Plug and Receptacle Dimensions
A
Panel
Thickness
A
Dim.
Jackpost Kit
Number*
B
C
+.004 (0.10)
-.000 (0.00)
+.004 (0.10)
3/32 (2.4)
.092/.087 (2.34/2.21)
.061/.056 (2.34/1.42)
.047/.042 (1.19/1.07)
.030/.025 (0.76/0.64)
320-9505-007
320-9505-006
320-9505-005
320-9505-004
+_.005 (0.13)
Shell Size
-.000 (0.00)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.261 (6.63)
1/16 (1.6)
3/64 (1.2)
1/32 (0.8)
9
15
21
25
31
37
51
.379 ( 9.63)
.529 (13.44)
.679 (17.25)
.779 (19.79)
.929 (23.60)
1.079 (27.41)
1.029 (26.14)
.565 (14.35)
.715 (18.16)
.865 (21.97)
.965 (24.51)
1.115 (28.32)
1.265 (32.13)
1.215 (30.86)
*2 Jackposts, 2 nuts, 2 washers.
NOTE: Torque value for jackpost 2.5 in/lbs
Panel Mounting Dimensions
.100 .00ꢀ
.200 .00ꢀ
(7.62 0.ꢁ13
(ꢀ.08 0.ꢁ13
.19ꢀ .00ꢀ
(ꢁ0.01 0.ꢁ13
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
35
Micro-D Plastic Shell - .050" Contact Spacing
MD
Panel Cutouts
D
TYP.
C
B
.015 (0.38)R.
MAX.(TYP)
FULL R.
(TYP.)
A
Figure 1
Front Mounting
C
A
+ .005 (0.13) R TYP
- .000 (0.00)
.075 (1.91)
D
B
FULL R. (TYP.)
26˚/27˚TYP
Figure 2
Rear Mounting
C
.450 .002
(11.43 0.05)
.030 (0.76) TYP.
D
+
+
+ +
FULL R.
(TYP.)
PANEL REF.
Figure 3
Edgeboard Mounting
A
B
C
D
Cutout
Figure
+ .004 (0.10)
- .000 (0.00)
+ .004 (0.10)
- .000 (0.00)
+ .005 (0.13)
- .000 (0.00)
+ .005 (0.13)
- .000 (0.00)
Size
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
.409 (10.39)
.379 ( 9.63)
-
.172 (4.37)
.219 (5.56)
-
.570 (14.48)
.570 (14.48)
.570 (14.48)
.720 (18.29)
.720 (18.29)
.720 (18.29)
.870 (22.10)
.870 (22.10)
.870 (22.10)
.970 (24.64)
.970 (24.64)
.970 (24.64)
1.120 (28.45)
1.120 (28.45)
1.120 (28.45)
1.270 (32.26)
1.270 (32.26)
1.270 (32.26)
1.220 (30.99)
1.220 (30.99)
1.220 (30.99)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
.089 (2.26)
9
.559 (14.20)
.529 (13.44)
-
.172 (4.37)
.219 (5.56)
-
15
21
25
31
37
51
.709 (18.00)
.679 (17.25)
-
.172 (4.37)
.219 (5.56)
-
.809 (20.55)
.779 (19.79)
-
.172 (4.37)
.219 (5.56)
-
.959 (24.36)
.929 (23.60)
-
.172 (4.37)
.219 (5.56)
-
1.109 (28.17)
1.079 (27.41)
-
.172 (4.37)
.219 (5.56)
-
1.059 (26.90)
1.029 (26.14)
-
.215 (5.46)
.261 (6.63)
-
NOTES:
1.
2.
3.
Front mounting (figure 1) and rear mounting (figure 2) accommodates #2-56 screws.
Front mounting is preferred. However, when rear mounting is necessary. use detail on previous page.
Edgeboard mounting bracket (figure3) uses #2-56 screws. Dimension .450 .002 (11.43 0.05) locates the
MD receptacle flush with the end of the board.
www.ittcannon.com
36
Micro-D Plastic Shell - .050" Contact Spacing
MD/MDV
How to Order
MD
1-
9
P
H
001
P
R
PCB ordering information - page 30
RoHS COMPLIANCE
SERIES-INSULATOR STYLE-MATERIAL
CONTACT SPACING
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODE
LOCKING HARDWARE
SERIES-INSULATOR STYLE-MATERIAL
MD - Clip mounting -Diallyl phthalate
MDV - Clip mounting-Polyester
TERMINATION CODE**
(H) 001 - 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon, Yellow.
(H) 003 - 18", 7/34 strand, #26 AWG,
CONTACT ARRANGEMENT
9-15-21-25-31*-37-51. See page 7
CONTACT TYPE
P - Pin
S - Socket
CONTACT SPACING
1 - .050 (1.27) centers
MIL-W-16878/4, Type E Teflon, color
coded to MIL-STD-681 System I.
TERMINATION TYPE
(L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper.
(L) 2 - 1" uninsulated solid #25 AWG gold plated copper.
No designator - No hardware - standard mounting
H - Insulated solid or stranded wire
L - Uninsulated solid wire
S - Solder pot to accept #26 AWG max.
harness wire.
.091 (2.31) hole diameter
* Not available in clip mounting.
** See page 79 and 81for additional codes.
With Clip Mounting Slots
Glass-filled Diallyl Phthalate
Plastic Insulator
Glass-filled Polyester
Plastic Insulator
Plug
MD
MDV
B
.ꢀ30
(3.30)
MAX.
.022 (0.56)
MAX.
.065 (ꢀ.65)
MAX.
.204 (5.ꢀ8)
MAX.
.375 (9.52)
MAX.
E
D
.093 .005
(2.36 0.ꢀ3)
.ꢀ70
(4.32)
C
A
Solder Pot
Receptacle
B
.ꢀ70
(4.32)
MAX.
.065 (ꢀ.65)
MAX.
.022 (0.56)
MAX.
.ꢀ85 (4.69)
MAX.
.356 (9.04)
MAX.
E
D
.093 .005
(2.36 0.ꢀ3)
.2ꢀ0
(5.33)
C
A
Solder Pot
A
B
C
D
E
Avg. Weight***
Part Number by Shell Size
Max.
Max.
Max.
Max.
Max.
5ꢀ ꢁ(z.ꢂ) 5ꢀ ꢁgm.ꢂ
.026 (0.73)
.026 (0.73)
.038 (1.10)
.035 (1.00)
.053 (1.50)
.050 (1.40)
.063 (1.80)
.056 (1.60)
.086 (2.45)
.076 (2.15)
.109 (3.10)
.093 (2.65)
MD1-9P**
MD1-9S**
MDV1-9-P**
MDV1-9S**
MDV1-15P**
MDV1-15S**
MDV1-21P**
MDV1-21S**
MDV1-25P**
MDV1-25S**
MDV1-37P**
MDV1-37S**
MDV1-51P**
MDV1-51S**
.512 (13.00)
.512 (13.00)
.662 (16.81)
.662 (16.81)
.812 (20.62)
.812 (20.62)
.912 (23.16)
.912 (23.16)
1.212 (30.78)
1.212 (30.78)
1.162 (29.51)
1.162 (29.51)
.292 (7.42)
.376 (9.55)
.405 (10.29)
.405 (10.29)
.555 (14.10)
.555 (14.10)
.705 (17.91)
.705 (17.91)
.805 (20.45)
.805 (20.45)
1.105 (28.07)
1.105 (28.07)
1.055 (26.80)
1.055 (26.80)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.170 (4.32)
.213 (5.41)
.213 (5.41)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.215 (5.46)
.258 (6.55)
.258 (6.55)
MD1-15P**
MD1-15S**
MD1-21P**
MD1-21S**
MD1-25P**
MD1-25S**
MD1-37P**
MD1-37S**
MD1-51P**
MD1-51S**
.442 (11.23)
.526 (13.36)
.592 (15.04)
.676 (17.17)
.692 (17.58)
.776 (19.71)
.992 (25.20)
1.076 (27.33)
.942 (23.93)
1.026 (26.06)
*** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.
** Add lead type and length, see Part Number Explanation.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
37
Micro-D Plastic Shell - .050" Contact Spacing
MD**
Panel Mounting Hardware
Clip Mounting
Illustrated is the recommended method of front mounting
with metal panel mounting keys. Panel mounting keys are
available with or without coupling retention clips.
For front mounting, place the rear of the connector thru
the panel cutout. With the mounting flange against the
panel, fully insert the panel mounting keys thru the slots
Coupling Retention Clip
Mounting Screw Brackets
(see Figures 1 and 3)
in the flange and thru the panel cutout. Retaining the
(see Figure 2)
keys in this position, bend them outward against the rear
of the panel. When mating a front mounted connector
with an unmounted connector, a coupling retention clip
assembly may be used to securely lock the two together.
Mounting screw brackets are available and may be used
instead of the panel mounting keys.
Description
Part Number
201-9100-000
294-9100-000
015-9100-000
015-5009-000
Panel Mounting Key
Mounting Key and Coupling Clip Assembly
Mounting Screw Bracket
Edgeboard Mounted
(see Figure 4)
Panel
Mounting Key
* Edgeboard Mounting Bracket
** Edgeboard Mounting Bracket and
Coupling Clip Assembly
MD51428-1
*
Must be ordered separately; specify left and right hand for complete
assembly.
**
Must be ordered separately; assembly contains set of left and right
hand types.
Dimensions (Clip Mounting Only)
.ꢄꢄ0 .00ꢀ
ꢁꢂ.ꢄꢂ 0.ꢃꢄ1
.200 .00ꢀ ꢁꢀ.0ꢂ 0.ꢃꢄ1
.26ꢀ .00ꢀ ꢁ6.ꢅꢄ 0.ꢃ
Plug and Receptacle
Rear Mounted
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
Panel Cutouts
C
A
B
C
D
D
A
Shell Cutout + .004 (0.10) + .004 (0.10) + .004 (0.10) + .005 (0.13)
Size Figure - .000 (0.00) - .000 (0.00) - .000 (0.00) - .000 (0.00)
B
B
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
.408 (10.36)
.408 (10.36)
.378 ( 9.60)
.400 (10.16)
.588 (14.94)
.588 (14.94)
.528 (13.28)
.550 (13.97)
.738 (18.75)
.738 (18.75)
.678 (17.27)
.700 (17.78)
.838 (21.29)
.838 (21.29)
.778 (19.76)
.800 (20.32)
.172 (4.37) .650 (16.51) .089 (2.26)
.172 (4.37)
.217 (5.51) .650 (16.51) .089 (2.26)
.091 (2.31)
.172 (4.37) .795 (20.19) .089 (2.26)
.172 (4.37)
.217 (5.51) .795 (20.19) .089 (2.26)
.091 (2.31)
.172 (4.37) .945 (24.00) .089 (2.26)
.172 (4.37)
.217 (5.51) .945 (24.00) .089 (2.26)
.091 (2.31)
.172 (4.37) 1.045 (26.54) .089 (2.26)
.172 (4.37)
.217 (5.51) 1.045 (26.54) .089 (2.26)
.091 (2.31)
A
.015 (0.38)R.
MAX. (TYP.)
.015 (0.38)R.
MAX. (TYP.)
FULL R. (TYP.)
-
-
9
Figure 1
Figure 2
Front Mounting
-
-
.005 (0.13) MAX.
R. (TYP.)
.018 + .002 - .000
A
C
.075 + .005 - .000
(1.91 + 0.13 _ 0.00)
(0.46 + 0.05 - 0.00)
-
-
A
15
21
25
37
51
D
B
-
-
B
.182 + .004 - .000
(4.62 + 0.10 - 0.00)
FULL R. (TYP.)
26˚/27˚ TYP.
-
-
PANEL REF.
Figure 3
Rear Mounting
Figure 4
Edgeboard Mounting
-
-
A panel thickness of 1/8" (3.17mm) maximum is recommended for ease of tab bending
when a panel mounting key & clip assembly or edgeboard mounting brackets are used.
Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for
dimensions.
1.
2.
-
-
-
-
1.138 (28.91) .172 (4.37) 1.345 (34.16) .089 (2.26)
1.138 (28.91) .172 (4.37)
1.078 (27.38) .217 (5.51) 1.345 (34.16) .089 (2.26)
1.100 (27.94) .091 (2.31)
1.088 (27.64) .215 (5.46) 1.295 (32.89) .089 (2.26)
1.088 (27.64) .215 (5.46)
1.028 (26.11) .260 (6.60) 1.295 (32.89) .089 (2.26)
1.050 (26.67) .091 (2.31)
3. Figure 4 is for edge board mounting bracket or edgeboard clip assembly. The .184 +_ .002
(2.67 +_ 0.05) dimension locates the MD socket insulator flush with the end of the board.
4. Screw brackets (015-9100-000) will accommodate #2-56 screws.
-
-
5. Front mounting (Figure 1) and rear mounting (Figure 3) accommodate #2-56 screws.
-
-
-
-
-
-
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
38
Micro Center Jackscrew
MJS
The MJS jackscrew series provides a reliable interconnect for board-to-board,
board-to-cable and in-line cable-to-cable applications. Layouts accommodating
up to 76 MICROPIN/MICROSOCKETTM contacts are available, with the same
wide range of options as are offered with the other MICRO Line products offered
in this catalog.
How to Order
MJS
*
-
26
P
H
001
R
RoHS COMPLIANCE
SERIES
INSULATOR MATERIAL
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODES
SERIES
MJS - Micro Center Jackscrew
CONTACT TYPE
P - Pin
TERMINATION CODE*
(H) 001
- 18" , 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
yellow.
S - Socket
INSULATOR MATERIAL
B - Diallyl phthalate
V - Polyester
TERMINATION TYPE
(H) 003
- 18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681
System I.
H - Insulated wire harness.
I - Integral tail (MJSV-28S only).
L - Solid - uninsulated wire.
S - Solder pot to accept #26 AWG
harness wire.
U - Polyetherimide
R - Polyphenylene sulfide
(L) 1
(L) 2
- 1/2" uninsulated solid #25
AWG gold plated copper.
- 1" uninsulated solid #25 AWG
gold plated copper.
CONTACT ARRANGEMENTS
Unshrounded Receptacle: 10, 26, 51, 66
Shrouded Receptacle; 10, 26, 34, 38, 42, 76
Low Profile Plug and Receptacle
(shrouded): 28
T - Thru bundle pigtail (MJSV-28P only).
* See Termination Codes shown below.
Standard Wire Termination Codes
The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum.
Harness Type (H)
#26 AWG per MIL-W-16878/4 Type E Teflon, 7/34 stranded.
Solid Uninsulated Type (L)
#25 AWG gold plated solid copper.
Length
3 (76.2)
All Yellow
H 020
H 019
H 026
H 029
H 028
H 001
H 038
Color Coded
H 027
Length
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.8)
120 (3048.0)
All Yellow
H 009
Color Coded
H 004
Termination
Code
Termination
Length
Length
Code
L14
L2
L61
L56
L57
L39
L58
L1
.125 (3.18)
.150 (3.81)
.190 (4.83)
.250 (6.35)
.375 (9.53)
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
6 (152.4)
8 (203.2)
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
H 016
H 010
H 005
H 034
H 011
H 006
L7
H 025
H 013
H 048
L6
H 002
H 017
H 046
L16 2.500 (63.50)
L10 3.000 (76.20)
H 003
H 042
H 041
H 023
Contact Arrangements
Face view of pin-use reverse order for socket
1
7
11
6
10
16
1
11
19
10
18
28
12
14
26
1
13
15
4
6
1
5
7
10
16 Contacts**
28 Contacts**
10 Contacts
26 Contacts
21
44
66
1
23
45
1
13
23
12
22
34
17
34
51
1
18
35
51 Contacts
66 Contacts
MJSB/MJSU (unshrouded)
34 Contacts
MJSV (shrouded)
*Low profile configuration
**MJSV & MJSR
Identification numbers are for reference only and do not appear on connectors.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
39
Micro Center Jackscrew
MJS
Unshrouded Receptacle (10-26-51-66)
MJSB/MJSU
.17ꢀ .ꢀ1ꢀ (ꢂ.32 ꢀ.20ꢁ
POLARIZING PIN (OPTIONAL WITH LOSS OF CONTACTꢁ
.126 .ꢀꢀ0
(3.2ꢀ ꢀ.13ꢁ
B
.050 (1.27) TYP.
1-6ꢂ UNC-2A
THREAD
1-6ꢂ UNC-2B
THREAD
C
A
.145 (3.68)
DIA.
MAX.
.055 (1.40) TYP.
.17ꢀ (ꢂ.32ꢁ
MAX.
.332 (8.ꢂ3ꢁ
MAX.
.11ꢀ MAX.
(2.79ꢁ
Rear View
Receptacle
Plug
UNSHROUDED
STANDARD MATERIALS AND FINISHES
A
Max.
.378 (9.60)
.378 (9.60)
B
Max.
C
Bsc.
.290 (7.37)
.290 (7.37)
Part Number
Micropin
Copper alloy, 50 miro-inch gold
Copper alloy, 50 micro-inch gold
MJSB or MJSU-10P
MJSB or MJSU-10S
MJSB or MJSU-26P
MJSB or MJSU-26S
MJSB or MJSU-51P
MJSB or MJSU-51S
MJSB or MJSU-66P
MJSB or MJSU-66S
.190 (4.83)
.190 (4.83)
.190 (4.83)
.190 (4.83)
.260 (6.60)
.260 (6.60)
.260 (6.60)
.260 (6.60)
Microsocket
Insulator
Diallyl phthalate, green color
or polyetherimide, natural color
.778 (19.76)
.778 (19.76)
1.028 (26.11)
1.028 (26.11)
1.280 (32.51)
1.280 (32.51)
.690 (17.53)
.690 (17.53)
.940 (23.88)
.940 (23.88)
1.190 (30.23)
1.190 (30.23)
Stainless steel, passivated & lubricated
Stainless steel, passivated
Jackscrew
Retainer, Jackscrew
Insert, Threaded
Post, Polarizing
Stainless steel, passivated
Stainless steel, passivated
Shrouded Receptacle (16-28*-34)
MJSV/MJSR
A
1-64 UNC-2B
THREAD
.205 (5.21) MAX.
.080 (2.03)
.065 (1.65)
.285 (7.24)
MAX.
B
D
C
Face View
Plug
.090 .0ꢀ0
(2.29 0.2ꢁ5
A
1-64 UNC-2A
THREAD
B
.110 (2.79) MAX.
.285 (7.24) MAX.
C
Face View
Receptacle
.145
(3.68)
DIA. MAX.
SHROUDED
A
B
C
D
Part Number
Max.
Max.
Ref.
.006 (0.15)
STANDARD MATERIALS AND FINISHES
MJSV or MJSR-16P
MJSV or MJSR-16S
.700 (17.78)
.700 (17.78)
.345 (8.76)
.320 (8.13)
.232 (5.89)
.246 (6.25)
.330 (8.38)
.305 (7.75)
.545 (13.84)
.545 (13.84)
.865 (21.97)
.865 (21.97)
1.025 (26.04)
1.025 (26.04)
.175 (4.45)
Micropin
Copper alloy, 50 miro-inch gold
Copper alloy, 50 micro-inch gold
-
Microsocket
Insulator
MJSV-28P* or MJSR-28P* 1.020 (25.91)
MJSV-28S* or MJSR-28S* 1.020 (25.91)
MJSV-34P or MJSR-34P 1.180 (29.97)
MJSV-34S or MJSR-34S 1.180 (29.97)
.062 (1.57)
Polyester, black color
Polyphenylene sulfide, black color
-
Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
Jackscrew
.160 (4.06)
-
Retainer, Jackscrew
Insert, Threaded
Post, Polarizing
*Low profile configuration, for "L" (uninsulated solid wire) termination add .090 (2.29) to the "B" dimension.
For "H" (insulated wire) termination add .200 (5.08) to the "B" dimension. For special configurations
with backpotted standoffs consult factory.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
40
Micro Center Jackscrew
MJS
Shrouded Receptacle (42)
MJSR-42P
A
1.322
(33.58)
REF.
.125
(3.18)
TYP.
.100
(2.54)
TYP.
CAV. #1
.297
(7.54) (10.67)
REF. MAX.
.420
+
.075
(1.91)
TYP.
CAV. #31
CAV #42
C
.035 (0.89)
.015 (0.38)
TYP.
#1 (.073) - 64 UNC-2B
THREADED INSERT
B
D
MJSR-42S
A
1.328
(33.73)
REF.
.125
(3.18)
TYP.
.100
(2.54)
TYP.
.075 (1.91)
TYP.
CAV
# 1
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
.303
(7.70)
REF.
.420
(10.67)
MAX.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
CAV. 42
C
1/16 SOCKET HEAD JACKSCREW
#1 (.073 - 64 UNC - 2A THREAD
.131 (3.33)
.121 (3.07)
TYP
B
.145 (3.68)
DIA. MAX.
.108
(2.74)
MAX.
A
Max.
B
Max.
C
Ref.
D
Part Number
.ꢀꢀ0 ꢁꢀ.ꢂ15
MJSR-42P
MJSR-42S
1.445 (36.70)
1.445 (36.70)
.345 (8.76)
.357 (9.07)
1.250 (31.75)
1.250 (31.75)
.142 (3.61)
-
STANDARD MATERIALS AND FINISHES
Micropin
Copper alloy, 50 miro-inch gold
Microsocket
Insulator
Copper alloy, 50 micro-inch gold
Polyphenylene sulfide, black color
Stainless steel, passivated
Jackscrew
Retainer, Jackscrew Stainless steel, passivated
Insert, Threaded Stainless steel, passivated
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
41
Micro Center Jackscrew
MJS
Shrouded Receptacle (76)
MJSR-76P
A
1.472
(37.39)
REF.
CAV. #13
CAV.
#1
.100 (2.54) TYP.
.570
(14.48)
MAX.
.447
(11.35)
REF.
+
.075
(1.91)
TYP.
CAV. #76
CAV. #62
C
.035 (0.89)
.015 (0.38)
TYP.
#2 (0.86) - 64 UNC-2B
THREADED INSERT
B
D
MJSR-76S
A
1.478 (37.54) TYP.
CAV. #13
CAV. #1
.100 (2.54)
TYP.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
.075
(1.91)
TYP.
+
+
+
+
+
+
+
+
+
+
.570
(14.48)
MAX.
.453
(11.51)
TYP.
CAV. #62
CAV. #76
C
1/16 SOCKET HEAD JACKSCREW
#2 (.086 - 64 UNC - 2A THREAD
.131 (3.33)
.121 (3.07)
TYP
B
.160
(4.06)
MAX.
.150 (3.81)
MAX.
A
Max.
B
Max.
C
Ref.
D
Part Number
.ꢀꢀ6 ꢁꢀ.ꢂ15
MJSR-76P
MJSR-76S
1.595 (40.51)
1.595 (40.51)
.345 (8.76)
.357 (9.07)
1.400 (35.56)
1.400 (35.56)
.142 (3.61)
-
STANDARD MATERIALS AND FINISHES
Micropin
Copper alloy, 50 miro-inch gold
Copper alloy, 50 micro-inch gold
Polyphenylene sulfide, black color
Stainless steel, passivated
Microsocket
Insulator
Jackscrew
Retainer, Jackscrew Stainless steel, passivated
Insert, Threaded Stainless steel, passivated
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
42
Micro Center Jackscrew
MJS
Plug (Molded-In Insert - Special)
MJSV**P
A
MAX.
INSERT
#1-64 UNC-2B
CAVITY # 1
ENGAGING FACE
MICRO-PIN
CONTACT
INSULATOR
.100 (2.54)
.300 (7.62)
MAX.
.162 (4.11)
REF.
LEAD
LENGTH
.061 (1.55)
MAX.
.109 (2.77)
MAX. DIA.
MJSV-26P**
(Shown)
A
Ref.
Part Number
MJSV-26P**
MJSV-38P**
.868 (22.05)
1.168 (29.67)
Receptacle (Special)
MJSV**S*
A
MAX.
MICRO-SOCKET
.100 (2.54)
REF.
#1-64 UNC-2A
CAVITY # 1
.190 (4.83)
REF.
.320 (8.13)
MAX.
.253 (6.43)
MAX.
.167 (4.24)
REF.
.155 (3.94)
MAX.
B
LEAD
LENGTH
JACKSCREW
MJSV-26S**
(Shown)
A
Max.
B
Ref.
Part Number
MJSV-26S**
MJSV-38S**
.943 (23.95)
1.243 (31.57)
.874 (22.20)
1.174 (29.82)
Contact Arrangements
Face view of pin - use reverse order for socket
.100 (2.54)
.100 (2.54)
REF.
.050 (1.27)
.075 (1.91)
.075 (1.91)
14
1
20
38
1
+
+
21
15
26
.050 (1.27)
TYP.
.050 (1.27)
TYP.
26 Contacts
38 Contacts
Identification numbers are for reference and do not appear on connectors.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
43
Microminiature Circular - .050" Contact Spacing
MICRO-K
MICRO-K microminiature circular connectors
are rugged yet lightweight - and are designed
to be comparable to MIL-DTL-83513.
Applications include biomedical,
instrumentation and miniature black boxes.
Standard MIK connectors are available in two
shell sizes accommodating two contact
arrangements pre-wired to your specific
requirements.
radios, military gun sights, airborne landing
systems and medical equipment. Maximum
temperature range - 55˚C to +125˚C.
MIKM: Similar to our MIK, except has a steel
shell and receptacle for improved ruggedness
and RFI resistance. It accommodates up to 85
MIK: Accommodate up to 55 contacts on .050
(1.27) centers (equivalent to 420 contacts per
square inch). Five keyway polarization prevents twist pin contacts. Maximum temperature
cross plugging. The threaded coupling nuts
provide strong, reliable coupling. MIK recepta-
cles can be either front or back panel mounted;
in back mounting applications, panel thickness
of up to 3/32" can be used on the larger sizes.
Maximum temperature range - 55˚C to + 125˚C.
range - 55˚C to + 125˚ C.
MIKQ: A quick disconnect metal shell and
receptacle version that can be instantaneously
disconnected yet provides a solid lock when
engaged. Applications include commercial TV
cameras, portable
Specifications
STANDARD MATERIAL AND FINISHES
ELECTRO/MECHANICAL FEATURES
MIK
MIKM
MIKQ
MIK
7,55
MIKM
7,55, 85
MIKQ
7,19, 37
Shell
Coupling Nut
Thermoplastic
Stainless Steel
Brass
No. of Contacts
Wire Size
#24 AWG
thru #32 AWG
Crimp
#24 AWG
thru #32 AWG
Crimp
#24 AWG
thru #32 AWG
Crimp
Stainless Steel
Passivated
Stainless Steel
Passivated
Brass, Electroless
Nickel Plated*
Insulator
Contacts
Glass-reinforced
Thermoplastic
Glass-reinforced
Thermoplastic
Glass-reinforced
Thermoplastic
Contact Termination
Contact Rating
Couping
3 Amps
3 Amps
3 Amps
50 Microinch
Gold Plated
Copper Alloy
50 Microinch
Gold Plated
Copper Alloy
50 Microinch
Gold Plated
Copper Alloy
Threaded
Keyways
.050 (1.27)
Centers
Threaded
Keyways
.050 (1.27)
Centers
Push/Pull
Keyways
.050 (1.27)
Polarization
Contact Spacing
*For plug only
Centers
7-Jam Nut
6-Straight Plug
9-Rear Panel
Mtg. Receptacle
Electrodeposited for receptacle.
Shell Styles
0-Wall Mtg.
6-Straight Plug
0-Wall Mtg.
6-Straight Plug
How to Order
MIK
M
6- 55
P
*
* * * * *
R
RoHS COMPLIANCE
SERIES
CONNECTOR TYPE
SHELL STYLE
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION TYPE
TERMINATION LENGTH CODE
HARDWARE
SERIES
CONTACT ARRANGEMENTS
TERMINATION LENGTH CODE (STANDARDS)
MIK: Microminiature Circular
7, 19, 37, 55, 85
(H) 001 -
18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
yellow.
18",7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon,
color coded to MIL-STD-681
System I.
1/2" uninsulated solid #25
AWG gold plated copper.
1" uninsulated solid #25 AWG
gold plated copper.
CONNECTOR TYPES
CONTACT TYPE
P - Pin
S - Socket
No Letter - Screw couping, plastic shell
M - Screw coupling, metal shell
Q - Push/Pull, metal shell
(H) 003 -
TERMINATION TYPES
H - Insulated round hook-up wire
L - Uninsulated round solid wire
SHELL STYLES
(L) 1 -
(L) 2 -
0 - Wall mounting receptacle (MIK and
MIKM only)
6 - Straight plug (MIK, MIKM and MIKQ)
7 - Jam nut mount (MIKQ only)
9 - Rear panel mounted receptacle (MIKQ)
HARDWARE
G - Cable nut and grip (MIKQ plug only)
N - Nut only (MIKQ plug only)
NOTE: Contact types cannot be interchanged
between shell styles.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
44
Microminiature Circular - .050" Contact Spacing
MIK
Standard Wire Termination Codes
The following termination codes are listed for your
information. For additional codes please refer to
Appendix on page 79 and 81. All wire lengths are
minimum.
HARNESS TYPES (H)
#26 AWG per MIL-W-16878 Type E, Teflon Stranded
Length
3 (76.2)
-All Yellow
020
Color Coded
027
6 (152.4)
019
016
8 (203.2)
026
034
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.8)
120 (3048.0)
029
025
028
002
001
003
038
023
009
004
010
005
011
006
013
048
017
046
042
041
Contact Arrangements
Face View, Pin Side-(Male Twist Pin Contacts)
1
4
5
11
19
28
1
3
12
4
9
1
4
20
10
16
5
9
29
39
48
MASTER KEY (TYP)
17
25
32
24
31
39
38
1
3
10
16
23
15
22
28
47
57
7
2
4
7
1
6
8
12
66
58
3
74
81
40
46
67
13
16
29
33
47
52
75
4
5
34
37
17
19
82
85
53
55
MIK/MIKM/MIKQ
7 Contacts
MIKQ
19 Contacts
MIKQ
37 Contacts
MIK/MIKM
55 Contacts
MIKM
85 Contacts
Cavity identification numbers are for reference only, they do not appear on connectors.
Shell Dimensions
MIK (Rear Panel Mount Thickness - see Tabulation "T")
Weight given is 1/2" uninsulated, solid #25 AWG gold plated copper pigtails
.335 (8.51)
K
Max.
A THD
A THD.
L
R
A THD.
A THD.
+
+
D
S
D
D
D
DIA.
S
R
DIA.
DIA.
DIA.
L
H (TYP.)
K
F
L
F
L
H (TYP.)
Plug
Receptacle
Plug
Receptacle
Shell Size 7 only
Shell Size 55 only
Plug
Part Number
by Shell Size
A
D
Max.
L
Max.
Avg. Weight
oz. (gm.) 5ꢀ
Thread
MIK6-7P
5/16-24UNF-2B
9/16-24UNF-2A
.375 (9.52)
.315 (8.00)
.054 (1.54)
.202 (5.72)
MIK6-55P
.755 (19.18)
.460 (11.68)
Receptacle
Part Number
by Shell Size
A
D
F
H
K
L
R
S
T
Avg. Weight
Thread
.010 (0.25)
Max.
.003 (0.08)
.078 (1.98)
.089 (2.26)
.010 (0.25)
Max.
.005 (0.13)
Max.
Max.
oz. (gm.) 5ꢀ
MIK0-7S
5/16-24UNF-2B .325 (8.26)
.315 (8.00)
.062 (1.57)
.355 (9.02)
.460 (11.68) .630 (16.00) .032 (0.81) .022 (.635)
.580 (14.73) .760 (19.30) .062 (1.57) .134 (3.81)
MIK0-55S
9/16-24UNF-2A .625 (15.88) .440 (11.18)
.100 (2.54) .495 (12.57)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
45
Microminiature Circular - .050" Contact Spacing
MIKM/MIKQ
Shell Dimensions (Continued)
MIKM (Rear Panel Mount Thickness .335 (8.51) max. - see Tabulation "T")
.3 3 5 (8 .5 1 )
M a x .
K
A T H D
L
A T H .D
R
A T H D
A T H D
D
D IA .
D
D IA .
S
S
R
D
D IA .
D
D IA .
L
K
H
(T Y.)P
F
F
L
L
H
(T Y.)P
Plug
Receptacle
Plug
Receptacle
Shell Size 7 only
Shell Size 55 & 85
Plug
Part Number
by Shell Size
A
D
Max.
L
Max.
Avg. Weight
oz. (gm.)+_5%
Thread
MIKM6-7P
MIKM6-55P
MIKM6-85P
5/16-24UNF-2A
5/8-24UNEF-2B
.375 (9.52)
.775 (19.18)
.860 (21.84)
.315 (8.00)
.440 (11.18)
.460 (11.68)
.054 (1.54)
.333 (9.44)
.419 (11.88)
11/16-24UNEF-2B
Receptacle
Part Number
by Shell Size
A
F
Max.
H
L
Max.
R
S
Max.
T
Max.
Avg. Weight
oz. (gm.)+_5%
Thread
D
+_ .003 (0.08)
K
+_ .005 (0.13)
MIKM0-7S
5/16-24UNF-2A .325 (8.26)
.320 (8.13)
.078 (1.98)
.091 (2.31)
.091 (2.31)
.062 (1.57) .400 (10.16) .460 (11.68)
.062 (1.57) .490 (12.45) .580 (14.73)
.062 (1.57) .490 (12.45) .674 (17.12)
.630 (16.00) .032 (0.81) .051 (1.45)
.760 (19.30) .125 (3.18) .269 (7.62)
.845 (21.46) .125 (3.18) .346 (9.80)
MIKM0-55S 5/8-24UNEF-2A .625 (15.88) .440 (11.18)
MIKM0-85S 11/16-24UNEF-2A .745 (18.92) .440 (11.18)
MIKQ (Front Panel Mounting Type Shown-.093 (2.36) Thickness)
.950 (24.13) MAX.
.043 .005
MASTER KEY
A
DIA.
(1.09 0.13)
D THD.
.760
(19.30) MAX.
C DIM.
ACROSS FLAT
*
NUT
B
DIA.
A
B
C
DIA.
1.20
.093 (2.36) REF.
.495 (12.67) MAX.
(30.48) MAX.
FOR SIZE 37 ONLY
Plug
Receptacle
Plug
Part Number
by Shell Size
A
MAX.
B
MAX.
C
Ref.
Avg. Weight
oz. (gm.)±±5
MIKQ6-7S
MIKQ6-19S
MIKQ6-37S
.385 (9.78)
.515 (13.08)
.760 (19.30)
.305 (7.75)
.405 (10.29)
.635 (16.13)
.180 (4.57)
.260 (6.60)
.350 (8.89)
.214 (6.08)
.376 (10.70)
.714 (20.23)
*Std. Conn. not supplied with Cable Nut & Grip, See Mod Codes. Lanyard Relase Is Available. Consult factory.
Receptacle
Part Number
by Shell Size
A
MAX.
B
MAX.
C
MAX.
D
Avg. Weight
oz. (gm.)±±5
Thread
MIKQ6-7S
MIKQ7-19P
MIKQ7-37P
.510 (12.95)
.575 (14.60)
.855 (21.71)
.245 (6.22)
.345 (8.76)
.520 (13.20)
.359 (9.12)
.470 (11.94)
.740 (18.80)
3/8-32UNEF-2A .128 (3.63)
1/2-28UNEF-2A .214 (6.08)
3/4-20UNEF-2A .300 (8.52)
MIKQ Front Panel Mounting
Front Panel Mounting-MIKQ7
A
B
DIA.
Shell Size
.005 (0.13)
A
MIKQ7-7P
MIKQ7-19P
MIKQ7-37P
.364 (9.24)
.390 (9.91)
.475 (12.06) .515 (13.08)
.740 (18.78) .755 (19.17)
B
DIA.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
46
Microminiature Circular - .050" Contact Spacing
MIKQ
Shell Dimensions (Continued)
MIKQ9-7P (Back Panel Mounting)
.043 .005
(ꢀ.09 0.ꢀ3)
KEY
.245 (6.22)
DIA. MAX.
.250 .0ꢀ0
(6.35 0.25)
WIRE
EXTENSION
LENGTH
.4ꢀ5 .0ꢀ0
(ꢀ0.54 0.25)
INSULATOR
SHELL
.485 (ꢀ2.32)
MAX.
.570 (ꢀ4.48)
DIA. MAX.
ꢀ/2
HEX-NUT
7/ꢀ6-28 UNEF-2A
Receptacle
MIKQ9-19P (Back Panel Mounting)
.043 .005 (ꢀ.09 0.ꢀ3)
INSULATOR
KEY
.250 .0ꢀ0 (6.35 0.25)
.525 .0ꢀ0
(ꢀ3.33 0.25)
.345 (8.76)
DIA. MAX.
+.0ꢀ5
5/8
HEX-NUT
.425
(ꢀ0.79
.625 .0ꢀ0
(ꢀ5.87 0.25) DIA.
9/ꢀ6-24 UNEF-2A THREAD
.485 (ꢀ2.32) MAX.
-.000
+0.30
-0.00
)
Receptacle
MIKQ9-37P (Back Panel Mounting)
.250 .0ꢀ0
(6.35 0.25)
.043 .005
(ꢀ.09 0.ꢀ3)
.505 MAX.
(ꢀ2.83 MAX.)
SHELL
.665 MAX.
(ꢀ6.89) MAX.
.730 .0ꢀ0
(ꢀ8.54 0.25)
INSULATOR
.490 MAX.
3/4-20 UNEF-2A THREAD
ꢀ3/ꢀ6 HEX NUT
.885 MAX.
(22.48 MAX.)
(ꢀ2.45 MAX.)
Receptacle
MIKQ Rear Panel Mounting
Rear Panel Mounting-MIKQ9
A
B
Dia.
A
.005 (0.13)
.425 (10.76)
.535 (13.58)
.740 (18.78)
Shell Size
MIKQ9-7P
MIKQ9-19P
MIKQ9-37P
.440 (11.18)
.564 (14.33)
.755 (19.17)
B
DIA.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
47
Microstrips .050" Contact Spacing
MT
The Cannon Microstrips provide an extremely
dense and reliable interconnection solution in
a minimum profile package, giving great appli-
cation flexibility. Available with latches or
guide pins, Microstrips are frequently found in
board-to-wire applications where high reliabili-
ty is a primary concern.
Three termination styles are available: solder
cup, pigtail, harness, or printed circuit leads.
The MicroPin Contact System assures maxi-
mum performance in a minimum package.
Product Features
•
•
•
•
•
•
•
•
•
•
High Performance MicroPin Contact System
High-density .050” contact spacing
Pre-wired for ease of installation
Fully potted wire terminations
Guide pins for alignment and polarizing
Quick-disconnect latches
3 Amp current rating
Precision crimp terminations
Solder cup, pigtail or printed circuit terminations
Surface mount leads
MicroPin Contact System
WIRE
SLEEVE
The Cannon MicroPin Contact System offers
uncompromised performance in downsized
interconnects. The beryllium copper pin contact is
fully recessed in the insulator, assuring positive
contact alignment and robust performance. The
socket contact is precision machined from high
strength copper alloy and features a smooth lead-in
chamfer.
WIRE CRIMP
The MicroPin features seven points of electrical
contact. This contact system assures high normal
force, excellent wipe and superior shock and
vibration performance.
Specifications
Current Rating 3 Amps max
Dielectric Withstanding Voltage 900 VAC @ sea level; 300 VAC @ 70,000 feet altitude
Insulation Resistance 5000 megohms min.
Contact Resistance 8 milliohms max.
Operating Temperature MTV polyester -56°C to +125°C; MTB diallyl phthalate -55°C to +150°C
Durability 500 cycles min.
Shock/Vibration 50 G’s/20 G’s
Connector Mating Force (8 oz.) x (# of contacts)
Latch Retention 5 lbs. min.
Wire Size #26 AWG insulated wire, #25 AWG uninsulated solid wire. MT strips will also accommodate #24 AWG through #32 AWG.
For other wiring options contact the factory for ordering information.
General Performance requirements are designed to be comparable to MIL-DTL-83513
Materials and Finishes
Insulator MTV: Glass-filled polyester per MIL-M-24519; MTB: Glass-filled diallyl phthalate per MIL-M-14
Contact Copper Alloy per 83513-Style
Contact Finish 50 Microinches Min. Gold Plated per MIL-G-45204
Insulated Wire #26 AWG. 19/38 Stranded, silver-plated copper, TFE Teflon insulation per MIL-W-16878/4
Uninsulated Solid Wire #25 AWG gold-plated copper per QQ-W-343
Potting Material/Contact Encapsulant Epoxy
Latch 300 series stainless steel, passivated
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
48
Microstrips .050" Contact Spacing
MT
How to Order
R
MTV1 – 16
P
H001 01
RoHS Compliance
Series
MTB1 – High Temperature Diallyl Phthalate 150°C (Recommended for severe environments)
MTV1 – Polyester 125°C (Recommended for general purpose use)
Number of Cavities
2 through 40.
This number is the total number of cavities including guide pins and latches. 40 positions is the
maximum recommended size for standard strips, but sizes up to 120 positions are available on request.
Contact Type
P- Pin
S – Socket
Pin Strip
Socket Strip
Termination Style
Solder Cup contacts for customer termination
S
Pre-wired Pigtails
H067 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, yellow
HY01 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, 10 color repeating
Straight Terminals .018” diameter, gold-plated
L1 – 5” extension
L2 – 1” extension
L57 – .190” extension
L61 – .125” extension
Right Angle Terminals staggered footprint .018” diameter, gold plated
AL57 – .190” extension
AL61 – .125” extension
Right Angle Terminals .050" in-line footprint .018" diameter, gold plated
BL57 – .190” extension
BL61 – .125” extension
Surface Mount .018” diameter, gold-plated
CL1
Guide Pin and Latch Options
01 – Guide pin installed in end cavities of socket strip. Blank holes in end cavities of pin strip.
02 – Guide pin installed in cavity #1 of socket Strip. Blank holes in cavity #1 of pin strip.
03 – Spring latches installed in end cavities of socket strip. Latch clips installed in end cavities of pin strip. For use with MTV1 only.
04 – Spring latch installed in center cavity of socket strip. Spring latch installed in center cavity of pin strip. For use with MTV1 only.
01
02
03
04
Guide Pins In End Cavities
Guide Pins In Cavity #1
End Latches
Center Latch
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
49
Microstrips .050" Contact Spacing
MT
Connector Weights
Contact (with std. 1/2”
copper pigtails)
.040 gms.
.021 gms.
MTB
MTV
pin
Insulator
(per contact
cavity)
socket
pin
.006 gms.
.014 gms.
.004 gms.
socket
Guide
Post
Stainless
Steel
.035 gms.
Male
.035 gms.
.074 gms.
Latch
Female
Terminal Dimensions
.170 (4.32) MAX.
.100 (2.54)
.065 (1.65) MAX.
.018 (.45)
.002 (.05)
L1: .500 (12.7)
L2: 1.00 (25.4)
L57: .190 (4.83)
.065 (1.65) MAX.
L6: .125 (3.18) MIN+ .015 (0.38)
.018 (1.65)
.002 (0.5)
BL57: .190 (4.83)
BL61: .125 (3.18) MIN+ .015 (0.38)
Solder Cup
Straight Terminals
Right Angle Terminals
.050" Centers
.0120 (0.30)
.001 (0.03)
CAV #1
PIN
ALL EVEN
NUMBERED
CONTACTS
.070 (1.78)
.030 (0.76)
AL57 .190 (4.83)
AL61 .125 (3.18)
CAV #1
SOCKET
.010 (0.25)
TYP
.160
(4.06)
.140
.100 (2.54)
(3.56)
.100 (2.54)
.050 (1.27) MIN
SOLDER DIPPED
.025 (0.64)
REF
Right Angle Terminals
.100" Spacing Staggered
Surface Mount Terminals
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
50
Microstrips .050" Contact Spacing
MT
Latch Dimensions
.250 (6.35)
MAX
.0085 (0.22)
REF
.076 (1.93)
MAX
.020 (0.51)
REF
.077 (1.96)
MAX
.035 (0.89)
REF
.035 (0.89)
REF
.010 (6.25)
REF
.107 (2.72) MAX
.050 (1.27)
REF
.050 (1.27)
REF
NO CONTACT
NO CONTACT
.045 (1.14)
MAX
.070 (1.78)
REF
.070 (1.78)
REF
.035 (0.89)
REF
.2835 (7.20)
REF
.035 (0.89)
REF
.100 (2.54)
REF
Male Latch
Female Latch
Guide Pin Dimensions
.032 .003
(0.81 0.08)
DIA.
.200 .010
(5.08 0.25)
Standard Wire Termination Codes
The following termination codes are listed for your
information. For additional codes please refer to
Appendix on page 79 and 81. All wire lengths are
minimum.
Harness Type - (H)
Solid Uninsulated Type - (L)
#25 AWG Gold Plated Copper
#26 AWG per MIL-W-16878 Type E; Teflon Stranded
Length
3 (76.2)
All Yellow
H020
H019
H026
H029
H028
H001
H033
H009
H010
H011
H013
H017
H042
Color Coded
H027
Termination Code
Length
.125 (3.18)
.150 (3.81)
L61
L56
L57
L39
L58
L1
6 (152.4)
H016
8 (203.2)
H034
.190 (4.83)
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.5)
120 (3048.0)
H025
.250 (6.35)
H002
.375 (9.52)
H003
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
H023
L14
L2
H004
H005
L7
H006
L6
H048
L16
L10
H046
H041
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
51
Microminiature Strip - .100/.050" Contact Spacing
MT
Polarization
Modification code "-01" in the part number
refers to guide posts located on both ends
of the socket side of the 50-MIL STRIP
connector and empty cavities on the pin
side to accept the guide posts.
Although in many cases it is not necessary
to polarize 50-MIL STRIP connectors, there
are several ways to prevent cross plugging.
One method is the use of guide posts that
can be located in specified cavities to assure
that the contacts will align when these post
are positioned before mating.
MTB1 and MTV1 - .050 (1.27) Contact Centers
.032 .003
(0.8ꢀ 0.08ꢁ
DIA.
.200 .0ꢀ0
(5.08 0.25ꢁ
.050 (ꢀ.27ꢁ TYP.
CAVITY
#ꢀ
CAVITY
#ꢀ
.ꢀ26 .005
(3.20 0.ꢀ3ꢁ
.050 (ꢀ.27ꢁ TYP.
.283 .005
(7.ꢀ9 0.ꢀ3ꢁ
A
A
CAVITY
#ꢀ
CAVITY
#ꢀ
.ꢀ00 .005
(2.54 0.ꢀ3ꢁ
LEAD
LENGTH
.070 .005 (ꢀ.78 0.ꢀ3ꢁꢂ MTV
.080 .005 (2.03 0.ꢀ3ꢁꢂ MTꢃ
.070 .005 (ꢀ.78 0.ꢀ3ꢁꢂ MTV
LEAD
LENGTH
.ꢀ25 (3.ꢀ8ꢁ
.080 .005 (2.03 0.ꢀ3ꢁꢂ MTꢃ
MAX. EPOXY
(INSULATED WIRE ONLYꢁ
.ꢀ25 (3.ꢀ8ꢁ
MAX. EPOXY
(INSULATED WIRE ONLYꢁ
Receptacle
Plug
Part
Part
Part
Part
Part
Part
Number
by Size
A
Number
by Size
A
Number
by Size
A
Number
by Size
A
Number
by Size
A
Number
by Size
A
± ±015 ꢀ0±38ꢁ
± ±015 ꢀ0±38ꢁ
± ±015 ꢀ0±38ꢁ
± ±015 ꢀ0±38ꢁ
± ±015 ꢀ0±38ꢁ
± ±015 ꢀ0±38ꢁ
MT*1-1**
MT*1-2**
MT*1-3**
MT*1-4**
MT*1-5**
MT*1-6**
MT*1-7**
MT*1-8**
MT*1-9**
MT*1-10**
MT*1-11**
MT*1-12**
MT*1-13**
MT*1-14**
MT*1-15**
MT*1-16**
MT*1-17**
MT*1-18**
MT*1-19**
MT*1-20**
.070 (1.78)
.120 (3.05)
.170 (4.32)
.220 (5.59)
.270 (6.85)
.320 (8.13)
.370 (9.40)
.420 (10.67)
.470 (11.94)
.520 (13.60)
.570 (14.48)
.620 (15.75)
.670 (17.02)
.720 (18.29)
.770 (19.56)
.820 (20.83)
.870 (22.10)
.920 (23.37)
.970 (24.64)
1.020 (25.91)
MT*1-21** 1.070 (27.18)
MT*1-22** 1.120 (28.45)
MT*1-23** 1.170 (29.72)
MT*1-24** 1.220 (30.99)
MT*1-25** 1.270 (32.36)
MT*1-26** 1.320 (33.53)
MT*1-27** 1.370 (34.80)
MT*1-28** 1.420 (36.07)
MT*1-29** 1.470 (37.34)
MT*1-30** 1.520 (38.61)
MT*1-31** 1.570 (39.88)
MT*1-32** 1.620 (41.15)
MT*1-33** 1.670 (42.42)
MT*1-34** 1.720 (43.69)
MT*1-35** 1.770 (44.96)
MT*1-36** 1.820 (46.23)
MT*1-37** 1.870 (47.50)
MT*1-38** 1.920 (48.77)
MT*1-39** 1.970 (50.04)
MT*1-40** 2.020 (51.31)
MT*1-41**
MT*1-42**
MT*1-43**
MT*1-44**
MT*1-45**
MT*1-46**
MT*1-47**
MT*1-48**
MT*1-49**
MT*1-50**
MT*1-51**
MT*1-52**
MT*1-53**
MT*1-54**
MT*1-55**
MT*1-56**
MT*1-57**
MT*1-58**
MT*1-59**
MT*1-60**
2.070 (52.58)
2.120 (53.85)
2.170 (55.12)
2.220 (56.39)
2.270 (57.66)
2.320 (58.93)
2.370 (60.20)
2.420 (61.47)
2.470 (62.74)
2.520 (64.01)
2.570 (65.28)
2.620 (66.55)
2.670 (67.82)
2.720 (69.09)
2.770 (70.36)
2.820 (71.63)
2.870 (72.90)
2.920 (74.17)
2.970 (75.44)
3.020 (76.71)
MT*1-61**
MT*1-62**
MT*1-63**
MT*1-64**
MT*1-65**
MT*1-66**
MT*1-67**
MT*1-68**
MT*1-69**
MT*1-70**
MT*1-71**
MT*1-72**
MT*1-73**
MT*1-74**
MT*1-75**
MT*1-76**
MT*1-77**
MT*1-78**
MT*1-79**
MT*1-80**
3.070 (77.98)
3.120 (79.25)
3.170 (80.52)
3.220 (81.79)
3.270 (83.06)
3.320 (84.33)
3.370 (85.60)
3.420 (86.87)
3.470 (88.14)
3.520 (89.41)
3.570 (90.68)
3.620 (91.95)
3.670 (93.22)
3.720 (94.49)
3.770 (95.76)
3.820 (97.03)
3.870 (98.30)
3.920 (99.57)
MT*1-81**
MT*1-82**
MT*1-83**
MT*1-84**
MT*1-85**
MT*1-86**
MT*1-87**
MT*1-88**
MT*1-89**
MT*1-90**
MT*1-91**
MT*1-92**
MT*1-93**
MT*1-94**
MT*1-95**
MT*1-96**
MT*1-97**
MT*1-98**
4.070 (103.38) MT*1-101** 5.070 (128.78)
4.120 (104.65) MT*1-102** 5.120 (130.05)
4.170 (105.92) MT*1-103** 5.170 (131.32)
4.220 (107.19) MT*1-104** 5.220 (132.59)
4.270 (108.46) MT*1-105** 5.270 (133.86)
4.320 (109.73) MT*1-106** 5.320 (135.13)
4.370 (111.00) MT*1-107** 5.370 (136.40)
4.420 (112.27) MT*1-108** 5.420 (137.67)
4.470 (113.54) MT*1-109** 5.470 (138.94)
4.520 (114.81) MT*1-110** 5.520 (140.21)
4.570 (116.08) MT*1-111** 5.570 (141.48)
4.620 (117.35) MT*1-112** 5.620 (142.75)
4.670 (118.62) MT*1-113** 5.670 (144.02)
4.720 (119.89) MT*1-114** 5.720 (145.29)
4.770 (121.16) MT*1-115** 5.770 (146.56)
4.820 (122.43) MT*1-116** 5.820 (147.83)
4.870 (123.70) MT*1-117** 5.870 (149.10)
4.920 (124.97) MT*1-118** 5.920 (150.37)
4.970 (126.24) MT*1-119** 5.970 (151.64)
3.970 (100.84) MT*1-99**
4.020 (102.11) MT*1-100** 5.020 (127.50) MT*1-120** 6.020 (152.91)
NOTE: MTB1 available in up to 120 contacts.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
52
Microminiature Strip - .100/.050" Contact Spacing
MT
MTB2 and MTV2 - .100 (2.54) Contact Centers
.032 .003
(0.8ꢀ 0.08ꢁ
DIA.
.200 .0ꢀ0
(5.08 0.25ꢁ
CAV #ꢀ
A
A
CAVITY
#ꢀ
.ꢀ00 (2.54ꢁ TYP.
.070 .005 (ꢀ.78 0.ꢀ3ꢁꢂ MTV
.080 .005 (2.03 0.ꢀ3ꢁꢂ MTꢃ
.070 .005 (ꢀ.78 0.ꢀ3ꢁꢂ MTV
.080 .005 (2.03 0.ꢀ3ꢁꢂ MTꢃ
CAVITY
#ꢀ
.ꢀ00 (2.54ꢁ
TYP.
CAVITY
#ꢀ
.ꢀ26 .005
(3.20 0.ꢀ3ꢁ
.283 .005
(7.ꢀ9 0.ꢀ3ꢁ
.ꢀ00 .005
(2.54 0.ꢀ3ꢁ
LEAD
LENGTH
LEAD
LENGTH
.ꢀ25 (3.ꢀ8ꢁ
MAX. EPOXY
(INSULATED WIRE ONLYꢁ
.ꢀ25 (3.ꢀ8ꢁ
MAX. EPOXY
(INSULATED WIRE ONLYꢁ
Plug
Receptacle
Part
Number
by Size
Part
Number
by Size
A
A
± ±015 ꢀ0±38ꢁ
± ±015 ꢀ0±38ꢁ
3.070 (77.98)
3.170 (80.52)
3.270 (83.06)
3.370 (85.60)
3.470 (88.14)
3.570 (90.68)
3.670 (93.22)
3.770 (95.76)
3.870 (98.30)
3.970 (100.84)
4.070 (103.38)
4.170 (105.92)
4.270 (108.46)
4.370 (111.00)
4.470 (113.54)
4.570 (116.08)
4.670 (118.62)
4.770 (121.16)
4.870 (123.70)
4.970 (126.24)
5.070 (128.78)
5.170 (131.32)
5.270 (133.86)
5.370 (136.40)
5.470 (138.94)
5.570 (141.48)
5.670 (144.02)
5.770 (146.56)
5.870 (149.10)
5.970 (151.64)
MT*2-1**
MT*2-2**
MT*2-3**
MT*2-4**
MT*2-5**
MT*2-6**
MT*2-7**
MT*2-8**
MT*2-9**
MT*2-10**
MT*2-11**
MT*2-12**
MT*2-13**
MT*2-14**
MT*2-15**
MT*2-16**
MT*2-17**
MT*2-18**
MT*2-19**
MT*2-20**
MT*2*21**
MT*2-22**
MT*2-23**
MT*2-24**
MT*2-25**
MT*2-26**
MT*2-27**
MT*2-28**
MT*2-29**
MT*2-30**
.070 (1.78)
MT*2-31**
MT*2-32**
MT*2-33**
MT*2-34**
MT*2-35**
MT*2-36**
MT*2-37**
MT*2-38**
MT*2-39**
MT*2-40**
MT*2-41**
MT*2-42**
MT*2-43**
MT*2-44**
MT*2-45**
MT*2-46**
MT*2-47**
MT*2-48**
MT*2-49**
MT*2-50**
MT*2*51**
MT*2-52**
MT*2-53**
MT*2-54**
MT*2-55**
MT*2-56**
MT*2-57**
MT*2-58**
MT*2-59**
MT*2-60**
.170 (4.32)
.270 (6.86)
.370 (9.40)
.470 (11.94)
.570 (14.48)
.670 (17.02)
.770 (19.56)
.870 (22.10)
.970 (24.64)
1.070 (27.18)
1.170 (29.72)
1.270 (32.26)
1.370 (34.80)
1.470 (37.34)
1.570 (39.88)
1.670 (42.42)
1.770 (44.96)
1.870 (47.50)
1.970 (50.04)
2.070 (52.58)
2.170 (55.12)
2.270 (57.66)
2.370 (60.20)
2.470 (62.74)
2.570 (65.28)
2.670 (67.82)
2.770 (70.36)
2.870 (72.90)
2.970 (75.44)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
53
Micro Edgeboard - .050" Contact Spacing
MEB
The Micro Edgeboard (MEB) connector series
ging. Contacts are on .050 (1.27) center
provides a combination of high density and high spacings. A variety of termination types are
reliability for applications in airborne and space
systems, computers and peripherals, and
industrial /commercial control systems. This
series incorporates the proven
available, including 90˚ or right angle pigtails
for multi-layered P.C. boards, "coke bottle”
termination for double-sided P.C. boards.
Harnessing capability is also available for both
pin and socket sides.
MICROPINTM/MICROSOCKETTM contact. This
contact has an outstanding record of high
reliability and millions of contacts are in use in
various applications where electrical
interconnects are used.
The MEB, including the SBR 90˚ or right angle
variation available for multi-layer boards, can
be mounted on the female (daughter) side of
double or single-sided P.C. boards. The mating
male (mother) board side can have the
terminations formed to meet the application
demands.
The MEB has machined aluminum shells for
ruggedness, diallyl phthalate insulator for top
electrical performance and a 36-position
polarization key system to prevent cross plug-
Conforms to MIL-C-55302/120 thru 123. (not
qualified)
Specifications
MATERIALS AND FINISHES
TERMINATION TYPES
Shell:
6061-T6 Aluminum Alloy per QQ-A-200/8 or QQ-A-225/8, electroless nickel per
SAE AMS-C-26074, Class 4, except .0010 to .0015 (0.03 to 0.04) thick or conversion
coating per MIL-C-5541, Class 3, color gold.
Consult factory for stranded wie lead modifications codes.
MECHANICAL FEATURES
Copper Alloy, 50 microinch gold per ASTM B488, Type II, Code C, Class 1.25
303 stainless steel, passivated per QQ-P-35.
Contact, Pin and Socket:
Jackscrew/Jackpost:
Insulator:
Size or Length:
Coupling:
2 sizes
Friction/Jackscrew
Shells, polarizing keys (36 positions)
Polarization:
Glass-filled diallyl phthalate per MIL-M-14, Type SDG-F, color green Polyester
per MIL-M-24519, Type GPT-30F , color black available for MEB-128 upon
request.
Contact Spacing Centers: .050 (1.27)
Shell Styles: Plug and receptacle
How to Order
Not applicable for printed
circuit board configurations
shown on pages 55 & 56
MEB 1 - 128
P
* * * * *
R
RoHS COMPLIANCE
SERIES PREFIX
CONTACT SPACING
LAYOUT
CONTACT TYPE
TERMINATION MODIFICATIONS
LEAD LENGTH
OTHER MODIFICATIONS
TERMINATION MODIFICATIONS
SERIES PREFIX
MEB -
Micro edgeboard, plug with twist pin
contacts or recept. with microsocket
contacts.
L -
H -
Uninsulated solid wire
Insulated stranded round harness
wire
S -
Solder pots
BR -
PC board right angle, socket side only
CONTACT SPACING
LEAD LENGTH
1 - .050 (1.27) centers 128/184
2 - .100 (2.54) centers 64/92
(alternate contact holes)
Consult factory for wire lead modification codes.
OTHER MODIFICATIONS
Consult factory
LAYOUT
64, 92, 128, 184
CONTACT TYPE
P - Pin
S - Socket
* For other contact spacing acommodations consult customer service.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
54
Micro Edgeboard - .050" Contact Spacing
MEB
Plug (Mother Board)
MEB1-12BS
A
.050 (1.27)
B1
B
A1
.050
(1.27)
RETAINING PIN HOLES
.250 (6.35)
C
#24 AWG
H
F
E
.180 .005
(4.57 .13)
G
D
.0945 .0035 (2.40 .09) DIA.
THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY
.187 (4.75) DIA. THRU "B"SIDE ONLY
Weight
oz. (gm.) Max.
A
B
C
D
E
F
Max.
G*
Max.
H
Part No.
.015 (0.38)
.010 (0.25)
.010 (0.25)
.010 (0.25)
.010 (0.25)
.020 (0.51)
128S
128SBR
.5 (14.17)
3.950 (100.33)
.250 (6.35)
.400 (10.16)
3.700 (93.98)
.300 (7.62)
.280 (7.11)
.030 (0.76)
.200 (5.08)
.5 (14.17)
*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.
Receptacle (Daughter Board)
MEB1-12BS
A
.050 (1.27)
B1
B
A1
.050
(1.27)
RETAINING PIN HOLES
.250 (6.35)
C
#24 AWG
H
F
E
.180 .005
(4.57 .13)
G
D
.0945 .0035 (2.40 .09) DIA.
THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY
.187 (4.75) DIA. THRU "B"SIDE ONLY
Weight
A
B
C
D
E
F
G*
H
Part No.
128S
128SBR
oz. (gm.) Max.
.ꢀ1ꢁ (ꢀ.ꢂ8)
.ꢀ1ꢀ (ꢀ.2ꢁ)
.ꢀ1ꢀ (ꢀ.2ꢁ)
.ꢀ1ꢀ (ꢀ.2ꢁ)
.ꢀ1ꢀ (ꢀ.2ꢁ)
Max.
Max.
.ꢀ2ꢀ (ꢀ.ꢁ1)
.5 (14.17)
.5 (14.17)
3.950 (100.33)
.250 (6.35)
.400 (10.16)
3.700 (93.98)
.300 (7.62)
.280 (7.11)
.030 (0.76)
.200 (5.08)
*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
55
Micro Edgeboard - .050" Contact Spacing
MEB
Plug (Mother Board)
MEB1-184P
.0945 +_ .0035
(2.40 +_ 0.09)
3 PLACES
B2
A
B1
C
C
A1
B1
B
.075
(1.91)
.050 (1.27) TYP
A2
A1
RETAINING PIN HOLES
D
H
G
#25 AWG
(MEB1-184P)
or
F
TYP
E
.075 (1.91)
.075 (1.91) TYP.
Weight
oz. (gm.) Max.
A
B
C
D
E
F
G
H
Part No.
184P
+_.015 (0.38)
+_.010 (0.25)
+_.005 (0.13)
+_.010 (0.25)
+_.010 (0.25)
+_.010 (0.25)
+_.025 (0.64)
+_.025 (0.64)
1.0 (28.35)
5.800 (147.32)
.343 (8.71)
2.775 (70.49)
.400 (10.16)
.250 (6.35)
.280 (7.11)
.350 (8.89)
.275 (6.99)
Receptacle (Daughter Board)
MEB1-184S
.050 (1.27) TYP.
A
C
C
A1
C
B
.075
(1.91)
B1
RETAINING PIN HOLES
.250
(6.35)
D
E
#24 AWG
H
F
.180 .005
(4.57 0.13)
J
G
.0945 .0035 (2.40 .09) DIA.
THRU .187 (4.75) X .075 (1.91) DEEP "C" BORE
3 PLACES-A SIDE ONLY.
.187 (4.75) DIA. 3 PLACES-B SIDE ONLY
Weight
oz. (gm.) Max.
A
B
C
D
E
F
Max.
G
Max.
H
J
Part No.
.ꢀ1ꢁ (ꢀ.ꢂ8)
.ꢀ1ꢀ (ꢀ.ꢃꢁ)
.ꢀꢀꢁ (ꢀ.1ꢂ)
.ꢀ1ꢀ (ꢀ.ꢃꢁ)
.ꢀ1ꢀ (ꢀ.ꢃꢁ)
.ꢀꢃꢀ (ꢀ.ꢁ1)
.ꢀ1ꢀ (ꢀ.ꢃꢁ)
184S
184SBR
1.0 (28.35)
1.0 (28.35)
5.800 (147.32)
.343 (8.71)
2.775 (70.49)
.400 (10.16)
.300 (7.62) .280 (7.11)
.030 (0.76)
.200 (5.08)
.250 (6.35)
All round pigtail #25 AWG wire termination designs available for the MEB1-12B receptacle will apply on the MEB1-184 series also.
*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
56
Micro Edgeboard - .050" Contact Spacing
MEB
PC Board Right Angle
MEB1-128SBR
.110
(2.79)
MIN.
.100
(2.54)
ROW B
EVEN*
.075
.050
(1.91)
(1.27)
.275
ROW B
ODD*
(6.99)
B6 B4 B2
B7
B1
A1
A6
A2
A3
.150
A7
A5
ROW A
EVEN*
ROW A
ODD*
(3.81)
.075
.180
(1.91)
(4.57)
.100
(2.54)
PC
BOARD
3 PLACES
B1
A1
Keying Accessory - Key and Retaining Pin
Polarizing Hardware Kit
.ꢀ04 .ꢀꢀ1
.ꢀ29 (ꢀ.74ꢂ
DIA. MAE.
MEB-128-P/N 320-9514-003
MEB-184-P/N 320-9514-002
(ꢀ.86 ꢀ.ꢀ0ꢂ
Contains 2 polarizing keys and 4 spiral pins.
H
A
MEB-184
P/N 980-0004-129
#2-56 UNC-2B
TꢁRHAD
.ꢀ04 .ꢀꢀ1
(ꢀ.86 ꢀ.ꢀ0ꢂ
B
.ꢀ29 (ꢀ.74ꢂ
DIA. MAE.
C
.1ꢀ6 .ꢀꢀ0
.186 .ꢀꢀ0 ꢁHE.
(2.69 ꢀ.ꢀ8ꢂ
DIA.
D
(4.72 ꢀ.ꢀ8ꢂ
MEB-128
P/N 980-0003-879
P/N 201-9509-000
A
B
C
D
E
.003 (0.08)
.005 (0.13)
.003 (0.08)
.010 (0.25)
.010 (0.25)
.081 (2.06)
.325 (8.26)
.089 (2.26)
.250 (6.35)
.313 (7.95)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
57
Micro Edgeboard - .050" Contact Spacing
Jackscrew/ Jackpost Assembly (MEB 64 & 128 Sizes Only)
Jackpost Kit
MEB
MEB plug or receptacle-P/N 320-9514-001
RECEPTACLE
CONNECTOR
PLUG
CONNECTOR
RETAINING
PIN
RETAINING
PIN
Contains 2 bushings and 4 spirals pins
JACKPOST
Jackscrew Kit
MEB plug-P/N 320-9521-001
MEB receptacle-P/N 320-9521-000
JACKPOST
.260
(6.60)
MAX.
Contains 2 jackscrew assemblies
#2-56
UNC-2A
THREAD
#2-56
UNC-2A
THREAD
.790 .010
20.07 0.25)
WASHER
[.022 (0.56) thk]
WASHER
[.032 (0.81) THK]
RETAINING
PIN
JACKSCREW
ASSEMBLY
RETAINING
PIN
.045
(1.14)
REF.
.270 (6.86)
MAX.
JACKSCREW
ASSEMBLY
Plug
Receptacle
with Jackscrew
with Jackscrew
Special Variations
Alternative Receptacle Configuration
.200
(5.08)
MIN.
4-40 UNC-THD
THRU HOLE
.016
(0.41)
DIA.
.100
(2.54)
31 PLACES
.275
(6.99)
.580
(14.73)
.285
(7.24)
MAX.
.030
(0.76)
.110
(2.79)
2 PLACES
.250
(6.35)
.125 +_ .010
(3.18 +_ 0.25)
2 PLACES
.060
(1.52)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
58
The Centi Line - .075" Contact Spacing
The Cannon Centi connectors are especially
suitable for commercial applications such as
computers, instrumentation, communications
and audio equipment. They are available in D
All Centi connectors use the reliable twist pin
The twist pin contact is recessed within the
insulator housing while the rugged cylindrical
socket is exposed. When the connector halves
are mated, the chamfered sockets guide the
contact design in a 5 amp version terminated
on .075 (1.91) and .100 (2.54) centers. The
Centi contact is crimp removable, connectors
subminiature size metal shell rectangular, plas- are available for customer assembly. Standard pins into positive alignment. The CentipinTM
tic shell rectangular and strip configurations.
crimp and assembly tools are available.
contact, now under compression, forms a
multi-point contact with the CentisocketTM to
provide a high degree of reliability.
Standard Data
• Contact rating: 5 amps max, except BR
Series (2 amps max.)
• Contact retention: Crimp snap-in/removable.
• Contact materials and finish: Copper alloy,
gold- plated per ASTM B488, Type II, Code
C, Class 1.25.
• Minimum contact centers: 0.075 (1.91).
• Wire sizes: #22 thru #26 AWG, stranded or
solid.
• Mating/unmating force: 12 oz. per contact,
max.
• Contact termination: Multiple indent crimp.
Performance Data
Test
Method
Criteria of Acceptance
Dielectric Withstanding Method 301:
Voltage
1,000 VAC at sea level
No breakdown
No breakdown
300 VAC at 70,000' altitude
Insulation Resistance
Thermal Shock
Method 302, Condition A
5,000 megohms minimum
No physical damage
Method 107, Condition A
+55˚C to +85˚C
Physical Shock
Method 213, Condition I:
100 G's, 3 axes, 6 millisecond
duration sawtooth pulse
No physical damage
No loss of continutiy> 1/µsec
Vibration
Durability
Method 204, Condition B:
No physical damage
15 G's, 10-2,000 Hz, 12 hours
No loss of continuity> 1µsec
500 cycles of mating and
unmating, 500 CPH max.
No mechanical or electrical defects
Moisture Resistance
Salt Spray
Method 106, Omit 7a and 7b
Insulation resistance > 100 megohms
Method 101, Condition B:
48 hours
Shall be capable of mating and unmating
and meet contact resistance requirements
Contact Resistance
Contact Retention
Method 307:
At 5 amps
9 milliohms maximum
-
4 lb. minimum axial load
(after 10 insertion extraction cycles)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
59
Double Density D - .075" Contact Spacing
2D
The Double Density D is a rectangular connector in
the popular D Subminiature shell configuration
featuring double the contact density in the same
insert area. The Double Density D connector can
positions are reversed; the flexible CentipinTM
Contacts are crimp removable type.
contacts are recessed in the insulator and the more
rugged CentisocketTM contacts are exposed. This
reversal of positions, and the chamfered-entry of the
The Double Density D connector is available in the
five popular shell and insert sizes accommodating up
to 100 contacts. These connectors mate exclusively
with other Double Density D connectors. A wide
range of accessories can be used, including junction
shells, potting cups, switching shells, guide pin
plates, and dust caps.
thus accommodate up to 100 contacts instead of 50. sockets, assures positive mating even under severe
misalignment conditions. The contacts are retained
This double contact density is achieved by using
field-proven, highly reliable CentipinTM/CentisocketTM
contacts on .075 (1.91) centers, in the positive con-
tact alignment design. In this design contact
in the monobloc insulator by a resilient internal
shoulder that snaps into a locking groove in the con-
tact. The chamfered front of the contact will not
damage the internal shoulder in the insulator.
1. STANDARD D HARDWARE-
Including full range of D-Subminiature accessories
2. ONE PIECE MONOBLOCK INSULATOR-
1
2
glass-filled nylon material
3. CONTACT RETENTION-
thermoplastic internal shoulder snaps into a locking groove in the contact.
Retention Force: 8 lbs. min. initially, 4 lbs. min. after 10 cycles.
3
4
4. TWIST PIN CONTACTS-
seven outer wiping surfaces assure electrical continuity even under severe
shock and vibration
5. POSTIVE CONTACT ALIGNMENT-
flexible pin is recessed in insulator cavity and rugged socket is exposed
6. GUIDE-IN KEYS AND KEYWAYS-
5
6
assure alignment during mating and prevent scooping
Specifications
WEIGHT
MATERIALS AND FINISHES
MECHANICAL FEATURES
*Shell
Steel, cadmium plated with yellow chro-
Sizes
- Five shell sizes: E, A, B, C, and D
-
Part Number
Weight (in gr.)
Weight (in oz.)
by shell size Less With Contacts Less With Contacts
mate supplementary coating
Coupling
- Friction or jackscrew
- Keystone-shaped shells
- .075 (1.91)
-
Mounting Hardware Stainless steel
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
2DB52S
2DC79P
2DC79S
2DD100P
2DD100S
4.05
3.75
5.02
5.17
.142
.133
.183
.173
.308
.252
.413
.342
.453
.386
.177
.182
.239
.255
.402
.390
.555
.551
.633
.651
Polarization
Contact Spacing
and Float Mounts
-
Insulator
Glass-filled nylon
5.20
6.78
Contact Termination - Crimp snap-in
-
-
Contacts
Copper alloy, gold plate
A106 Gold over brass
A156 Gold over brass
A197 Tin/Lead over steel
4.90
7.22
Alternate finish,
Modification Code
8.75
11.40
11.05
15.73
15.62
17.95
18.45
7.15
11.70
9.70
*Brass non-magnetic also available
12.85
10.95
How to Order
2D
2D
E
A
19
31
S
P
* * * *
BR
F
R
RoHS COMPLIANCE
SERIES
SHELL SIZE
FLOAT MOUNTS
CONTACT ARRANGEMENT
CONTACT TYPE
TERMINATION
MODIFICATION
NOTE: Connectors may be ordered less contacts by adding the mod callout "FO" at end of number.
Contacts are then supplied in bulk form.
SERIES
2D - Double Density D
CONTACT ARRANGEMENT
19, 31, 52, 79 and 100
TERMINATION
BR - 90˚ right angle PCB mounting
(For BR Series use "P" to designate jackpost)
CONTACT TYPE*
P - Pin
SHELL SIZE
E, A, B, C and D
MODIFICATION
F171 - Jackpost assembly
F172 - Standard jackscrew
F173 - Low profile jackscrew
For other modifications consult factory
Dimensions shown in inch (mm)
S - Socket
FLOAT MOUNTS
Omit if not required
* Accommodates AWG #26 thru #22
Specifications and dimensions subject to change
www.ittcannon.com
60
Double Density D - .075" Contact Spacing
2D
Standard Shell
M
A
L
J
K
B
1ꢀ˚ (TYP)
G
+
+
D
E
+
+
H
C
V
TWO MTG. HOLES
.123 .ꢀꢀ5
(3.12 ꢀ.13)
T
T
T
+ .020 (0.51)
- .000 (0.00)
+ .020 (0.51)
- .000 (0.00)
Part Number
by Shell Size
Part Number
by Shell Size
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
.250 (6.35)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.236 (5.99)
2DB52S
2DC79P
2DC79S
2DD100P
2DD100S
.236 (5.99)
.236 (5.99)
.236 (5.99)
.236 (5.99)
.236 (5.99)
.856(21.74)MAX.
Float Mount
A
B
K
G
J
N
10˚ (TYPꢂ
+
+
H
+
+
E
D
.03ꢀ (.81ꢀꢂ
TOTAL
DIAMETRAL
FLOAT
M
TWO MTG. HOLES
.0885 .00ꢀ5
C
V
(ꢀ.ꢀ48 0.0ꢁ4ꢂ
Part Number
A
B
C
D
E
G
H
J
K
L
M
N
V
by Shell Size .015 (0.38)
.010 (0.25) .010 (0.25) .010 (0.25) .015 (0.38) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25) .010 (0.25)
Max.
2DE19P
2DE19S
2DA31P
2DA31S
2DB52P
2DB52S
2DC79P
2DC79S
1.213 (30.81) .697 (17.70) .984 (24.99) .360 (9.14) .494 (12.55) .759 (19.28) .422 (10.72) .036 (.914) .236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10)
1.213 (30.81) .640 (16.26) .984 (24.99) .308 (7.82) .494 (12.55) .759 (19.28) .422 (10.72) .032 (213)
1.541 (39.14) 1.025 (26.03) 1.312 (33.32) .360 (9.14) .494 (12.55) 1.083 (27.51) .422 (10.72) .036 (.914)
1.541 (39.14) .968 (24.58) 1.312 (33.32) .308 (7.82) .494 (12.55) 1.083 (27.51) .422 (10.72) .032 (213)
2.088 (53.03) 1.583 (40.21) 1.852 (47.04) .378 (9.60) .494 (12.55) 1.625 (41.27) .422 (10.72) .036 (.914)
2.088 (53.03) 1.508 (38.30) 1.852 (47.04) .308 (7.82) .494 (12.55) 1.625 (41.27) .422 (10.72) .032 (213)
2.729 (69.31) 2.231 (56.67) 2.500 (63.50) .378 (9.60) .494 (12.55) 2.272 (57.71) .422 (10.72) .036 (.914)
2.729 (69.31) 2.156 (54.76) 2.500 (63.50) .308 (7.82) .494 (12.55) 2.272 (57.71) .422 (10.72) .032 (213)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
.236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
.231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10)
.243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10)
2DD100P 2.635 (66.92) 2.127 (54.02) 2.406 (61.11) .484 (12.29) .605 (15.37) 2.178 (55.32) .534 (13.56) .036 (.914)
2DD100S 2.635 (66.92) 2.062 (52.37) 2.406 (61.11) .420 (10.67) .605 (15.37) 2.178 (55.32) .534 (13.56) .032 (213)
For shell with float mounts, add letter F after shell size, e.g., 2DEF19P.
Jackscrew/Jackpost Assembly
#4-40 UNC-2B
THREAD
.ꢀ80 .025 ꢁGri
(4.57 0.64) ꢂLengt
#4-40 UNC-2A THREAD
#4-40 UNC-2A THREAD
.025 (0.64)
MAX.
.025 (0.64)
MAX.
.233 (5.92)
.223 (5.66)
.ꢀ80 .025 ꢁGri
(4.57 0.64) ꢂLengt
.620 .0ꢀ0
(ꢀ5.75 0.25)
.230 (5.84) MAX.
.325 .0ꢀ5
(8.26 0.38)
#4-40 UNC-2A THREAD
Standard (F172) Jackscrew
(factory installed)
Low Profile (F173) Jackscrew
(factory installed)
Jackpost (F171)
Front Panel Connector Mounting Only
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
61
Double Density D - .075" Contact Spacing
2D
Contact Arrangements
All views are pin front face. Use reverse order for socket side.
1
7
6
1
10
21
31
1
17
35
52
13
19
11
22
18
36
14
DE
DA
DB
52 Contacts
19 Contacts
31 Contacts
1
26
27
52
76
51
75
1
26
53
79
27
54
100
DC
79 Contacts
DD
100 Contacts
Cavity identification numbers are shown for reference only and do not appear on insulator front face. However they do appear on rear of insulator.
90˚ PCB Mounting - 3 Row
.0375
(0.95)
REF.
.148
(3.76)
MIN.
.075
(.190)
REF.
.125 (3.18)
.115 (2.92)
DIA. TYP.
.130 (3.30)
.100 (2.54)
2x
.690
(17.53)
MAX.
.253 (6.43)
.233 (5.92)
.100
(2.54)
REF.
.100
(2.54)
REF.
.510 (12.95)
.490 (12.45)
B
B
CAV. #1
.065 (1.65)
.075 (1.90)
.510 (12.95)
.480 (12.18)
#4-40
UNC-2B THREAD
(2 PLACES)
LAST CAV.
A
A
PCB Termination Leads
(all contact arrangements)
.024 (6.10) to .028 (7.11).
LAST
LEAD
Suggested finished PC hole
Size .033 (8.38) +_ .003 (0.08)
LEAD #1
Part Number
by Shell Size
A
B
C
Max.
.015 (0.38)
1.215 (30.86)
1.540 (39.12)
2.090 (53.09)
2.730 (69.34)
.010 (0.25)
2DE19SBRP
2DA31SBRP
2DB52SBRP
2DC79SBRP
.984 (24.99)
1.312 (33.32)
1.852 (47.04)
2.500 (63.50)
.690 (17.53)
.690 (17.53)
.690 (17.53)
.690 (17.53)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
62
Double Density D - .075" Contact Spacing
2D
90˚ PCB Mounting - 4 Row
.0375 (0.94) REF.
.125 (3.18)
.115 (2.92)
.075 (1.90) REF.
.130
(3.30)
MIN.
DIA. TYP.
+
+ +
+
+
+
+
+
+
+
+
+
+ + +
+ +
+
+
+
+
+
+
+ + +
+
+
+
+
+
+
+ + +
+
+
+
+
+
+
+
+
+
+ +
+
+
+
+
.790
(20.07)
MAX.
+
+
+ + + +
+ + + + + +
+
+
+
+
+
+
+
+
+
.100
(2.54)
REF.
.200
(5.08)
REF.
.100
(2.54)
REF.
.253 (6.43)
.233 (5.92)
.510 (12.95)
.490 (12.45)
B
B
.075 (1.90)
CAV #1
.065 (1.65)
.620 (15.75)
.590 (14.99)
+
+
#4-40
UNC-2B THREAD
(2 PLACES)
CAV #100
A
A
LEAD
#100
LEAD
#1
Part Number
by Shell Size
A
B
C
+_ .015 (0.38)
2.635 (66.93)
+_ .010 (0.25)
2.406 (61.11)
Max.
2DD100SBRP
.790 (20.07)
Contact Arrangements - Page 62
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
63
Double Density D - .075" Contact Spacing
2D
Panel Cutouts
A
10˚0' TYP.
B
G
F
E
H
FULL R
K TYP R
.032 (0.81) R MAX. TYP
D
C
G
D
C
Mtg.
Conn. Method
A
B
C
D
E
F
G
H
K
+_ .005 (0.13) +_ .005 (0.13)
+_ .005 (0.13) +_ .005 (0.13)
+_ .005 (0.13)
+_ .005 (0.13)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.257 (6.53)
.225 (5.71)
.312 (7.92)
.278 (7.06)
+_ .002 (0.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
.120 (3.05)
+_ .002 (0.05)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
.060 (1.52)
+_ .002 (0.05)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
.083 (2.11)
.132 (3.35)
2DE
2DA
2DB
2DC
2DD
Front
Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
.874 (22.20)
.806 (20.47)
1.202 (30.53)
1.134 (28.80)
1.743 (44.27)
1.674 (42.52)
.437 (11.10)
.403 (10.24)
.601 (15.26)
.567 (14.40)
.872 (22.15)
.837 (21.26)
.984 (24.99)
.984 (24.99)
1.312 (33.32)
1.312 (33.32)
1.852 (47.04)
1.852 (47.04)
.492 (12.50)
.492 (12.50)
.656 (16.66)
.656 (16.66)
.926 (23.52)
.926 (23.52)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.513 (13.03)
.449 (11.40)
.623 (15.82)
.555 (14.10)
2.391 (60.73) 1.196 (30.38)
2.326 (59.08) 1.163 (29.54)
2.297 (58.34) 1.149 (29.18)
2.218 (56.34) 1.109 (28.17)
2.500 (63.50) 1.250 (31.75)
2.500 (63.50) 1.250 (31.75)
2.406 (61.11) 1.203 (30.56)
2.406 (61.11) 1.203 (30.56)
For contact part numbers, termination tooling and assembly see pages 67-69.
Panel Mounting
3/32 THICKNESS (REF.)
RECOMMENDED
RIVET THICKNESS
Front Mounting
Standard
Front Mounting
Float
RIVET THICKNESS
Rear Mounting
Rear Mounting
Float
Standard
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
64
Centi-D Loc-.075" Contact Spacing
CDL
A subminiature all plastic high density "D" rectan-
gular connector. The CDL is
a general purpose
connector with a peripheral o-ring and wire sealing
gasket. Connector utilizes rear insertion, front re-
lease, crimp snap-in size 22, centi-loc contacts
installable by the custormer or, if preferred, by the
factory.
MATERIAL
Insulator:
Black Nylon
Dielectric Gasket:
Contact:
Polychloroprene
Copper Alloy, Gold Plated
Silicone
Seal Ring
How to Order
CDL 2A - 139 P - * - F0
R
SERIES
CONTACT ARRANGEMENT
139
RoHS
COMPLIANCE
Centi-D Loc Series
(Consult customer service for other sizes)
SERIES
TYPE
TYPE
CONTACT STYLE
P - Centi-loc pin
2
- No lock (mtg. holes)
2A - No lock type with rear gasket
S - Centi-loc socket
CONTACT ARRANGEMENT
MODIFICATION CODES
CONTACT STYLE
F0 - Less contacts
MODIFICATION CODES
Plug
.560 (14.22)
MAX.
2.625 (66.68)
2.344 (59.54)
.005 (0.13)
CAVITY #1
CAVITY #1
.625 (15.88)
.010 (0.25)
.625 (15.88)
.010 (0.25)
CONTACT
CONTACT
HEIGHT
.065 (1.65)
.045 (1.14)
HEIGHT
.035 (0.89)
.015 (0.38)
SILICONE
SEAL RING
.260 (6.60)
.010 (0.25)
.175 (4.44) MAX.
.540 (13.72)
MAX.
.535
(13.59)
MAX.
2.025 (51.44) MAX.
2.025 (51.44)
MAX.
.150 (3.81)
.010 (0.25)
.150 (3.81)
.010 (0.25)
Plug
Receptacle
Recommended Panel Cutouts
.125 (3.18)
DIA. TYP.
.2035 (51.69)
.016 (0.41)
.063 (1.60)
RAD. MAX.
.565 (14.35)
.005 (0.13)
2.344 (59.54)
.005 (0.13)
Contact Arrangements
Engaging Face View
CAVITY #1
CAVITY #1
CAVITY #70
CAVITY #70
CAVITY #92
CAVITY #92
CAVITY #117
CAVITY #117
CAVITY #139
CAVITY #139
Plug
Receptacle
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
65
Strip Connectors - .100"/.075" Contact Spacing
CTA
CENTI-LOC connectors are low-cost nylon
strip connectors designed for commercial
applications such as instrumentation, commu-
nications, and medical equipment. They are
available in continuous strip form up to a max-
imum length of 6 inches (152.40mm), accom-
modating from 1 to 60 rear insertion, front
release, crimp snap-in size 22 CENTIPINTM/
CENTISOCKETTM contacts. These contacts
utilize a proven positive contact alignment
design, giving additional contact strength and
positive contact alignment during mating.
These connectors can be ordered in kit or bulk
form. The kit comprises all the parts necessary
to assemble one complete 6-inch (152.40) strip
connector with 60 contacts on .100 (2.54) cen-
ters or a 4-inch (101.60mm) strip with 53 con-
tacts on .075 (1.91) centers. If more then one
connector is required, the parts can be ordered
in bulk and assembled as desired.
Components and Accessories
The CENTI-LOC strip connector can be ordered in
kit or bulk form. The kit includes matin g insulators
with a full compliment of contacts and two guide
posts. If more than one connector is required, the
parts can be ordered in bulk and assembled as
desired.
Kit Form
Insulator
Kits include mating insulators with full
complement of contacts and two guide posts.
.475 (12.06)
MAX.
.275 (6.98)
MAX.
Part
Number
Contact
Center spacing
Guide Posts
Polarizing Posts
CTA3-KIT
CTA4-KIT
CTA3-CTA4-KIT
.075 (1.91)
.100 (2.54)
.075 (1.91) & .100 (2.54)
The guide posts and polarizing posts are inserted in the same manner as the contacts. The guide
posts are inserted into the socket insulator and the polarizing posts are inserted into the pin
insulator. The corresponding contact in the mating insulator must be removed for each.
See assembly instructions.
Contact
Center
Part
Number
Spacing
Type
Pin
Socket
Pin
Material
Nylon
Nylon
Nylon
Nylon
Insulator
CTA3-IP-53
CTA3-IS-53
CTA4-IP-60
CTA4-IS-60
CTA-GP
.075 (1.91)
.075 (1.91)
.100 (2.54)
.100 (2.54)
Socket
Guide Post
Polarizing Post
Passivated Stainless Steel
Passivated Stainless Steel
P/N 230-9507-000
P/N 230-9506-000
CTA-PP
Dimensional Data
4.031 (102.39)
MAX.
6.031 (153.19)
MAX.
.040 (1.02) MIN.
.040 (1.02) MIN.
.075 (1.91)
TYP.
.100 (2.54)
TYP.
.115 (2.92)
MAX.
.115 (2.92)
MAX.
CTA3-.075(1.91) Centers
CTA4-.100(2.54) Centers
Weights
Part
Number
No. of
Contacts
Contacts
Type
Avy. Weight
oz.
5%
gm.
pin
socket
pin
.185
.203
.230
.241
5.25
5.75
6.30
6.90
CTA3
CTA4
53
60
socket
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
66
The Centi Line - .075" Contact Spacing
2D/CTA
Contacts
Contact Part Number
Part Number
Pin
Socket
Type
Pin
Socket
031-9540-000
031-9540-004
031-9540-005
030-9542-001 Standard 30µin. plating
030-9542-002 50µ in. plating
A resilient internal shoulder retains the contacts in the
insulator housing. The front of the contact is chamfered
to prevent damage to the internal shoulder as the
contact is pushed into position.
030-9542-004
With inspection hole;
50µ in. plating
N/A
030-9542-011 P.C. tail
.026 dia. x .083 lg. Soc.
030-9542-012 P.C. tail
*031-9540-013
.183 lg. Soc.
.020 dia. x
.183 lg. Pin
P.C. Tail Contacts
031-9540-016
030-9542-014 Long crimp
barrel **
Subtract .064 (1.63) +_ .010 (.25) from pigtail
length when used in 2D pin insulator for potting
well of connector assembly.
031-9540-022
030-9556-000 Small crimp bore
***
***
For AWG #32 & 30
Subtract .081 (2.08) +_ .010 (.25) from pigtail
length when used in 2D socket insulator for
potting well of connector assembly.
031-9540-007
*031-9540-015
030-9542-022 Small crimp bore
For AWG #28 & 30
030-9542-015 P.C. tail
.232 lg. Soc.
.020 dia. x
.255 lg. Pin
*031-9540-019
030-9542-016 P.C. tail
.444 lg. Soc.
.018 dia. x
.445 lg. Pin
50µ in. plating
NOTE: Plating, except as noted, is 30 micro-inch gold.
* Consult factory for any tail size or plating requirements.
** Special crimp locator required. Part number: 995-0001-714. (L3198-CL-PSL)
*** Use special insertion tip (323-9510-016 &-017).
2D and Centi-Loc Crimp and Assembly Tools
Tool
Locators
Pin
Socket
Description
Part Number
M22520/2-01
995-0001-584
L3198-CLP
L3198-CLS
995-0001-338
995-0001-353
M22520/2-01
Insertion Tools For Standard Contact
AWG
Size*
Kit Part Number
(handle and tip)
Tip
Handle
Part Number**
Part Number**
22
CIT-PS-CTA-22
CIT-PS-CTA-24
CIT-PS-CTA-26
CIT-PS-CTA-28
CIT-PS-CTA-30
323-9510-001
323-9510-002
323-9510-003
323-9510-004
323-9510-005
204-9500-000
204-9500-000
204-9500-000
204-9500-000
204-9500-000
24
26
CIET-CTA
Handle
Insertion Tips
28
30/P.C. Tail
* Based on wire size per MIL-W-16878 with Type E insulation, use smaller tool for wire with thin
insulation, larger tool for wire having thick insulation.
** The 5 insertion tips (part numbers 323-9510-001 thru - 005). plus handle, and the pin and socket
extaction tips maybe ordered as a SINGLE KIT by specifying the part number CIET-CTA-2.
[Part number: 070143-0002].
Insertion Tools For Long Crimp barrel Contacts
AWG
Size*
Tip Part Number ***
Pin Contact
Tip Part Number ***
Socket Contact
Handle
Part Number***
22
24
26
323-9510-008
323-9510-009
323-9510-010
323-9510-012
323-9510-013
323-9510-014
204-9500-000
204-9500-000
204-9500-000
CTA-AB
Assembly Holding
Block
*** To order the SINGLE KIT for the long crimp barrel contact (tip part numbers 323-9510-008 thru
-014, handle and pin and socket extraction tips) please specify CIET-CTA-3.
Part Number: 328-9508-000
Extraction Tools
Kit Part Number
(handle and tip)
Tip Part
Number
Handle Part
Number
Contact
CENTIPIN
Description
CET-P-CTA-2
CET-S-CTA-1
Socket Extraction
Pin Extraction
Tip
070112-0002
070113-0001
324-9502-000
324-9501-000
204-9500-000
204-9500-000
Tip
CENTISOCKET
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
67
The Centi Line - .075" Contact Spacing
2D/CTA
2D/CTA CENTI-LOCTM Connectors Assembly Instructions
The Double Density D/CTA CENTI-LOC Connectors
are highly reliable and simple connectors to use.
There are a few helpful suggestions that will assure
complete satisfaction when followed:
1. The following instructions should be followed.
2. The proper crimp tool and locator (if required)
must be used. These tools have been designed
for use with this product. Substitutions of crimp-
ing equipment may result in connector failure at
the assembly operation.
3. After crimping a contact to a lead it is of vital
importance that the proper tool be used to assure
seating the contact in the insulator in the proper
position. Any substitution of insertion tools may
result in over or under insertion of the contact
which may damage the retention system of the
insulator.
4. The female (socket) side of the connector has
been designed with a controlled float to allow for
ease of mating. To avoid reducing this float or
causing a splaying of the contacts, any unneces-
sary strain caused by clamping the leads too
close to the rear of the connector should be
avoided.
Use of recommended tooling together with proper
assembly techniques will pay dividends in reliability
and reduced costs.
2D Assembly Instructions
WIRE STRIPPING
CONTACT CRIMPING
.100
(2.54)
Using the proper crimp tool and locator, insert the
contact into the locator. Insert the stripped end of the
wire into the contact crimp pot, and crimp the contact to
the wire. Squeeze the handles firmly to insure a proper
crimp (tool will not release if crimping is incomplete).
NOTE: Contact stop must be changed in tool locator
when crimping pin and socket contacts.
Cut the wires to length required and strip .100" of
insulation from the end to be crimped. Check for
cut or broken wires and frayed insulation.
CONTACT INSERTION
2. Using a firm, steady pressure, push the contact into
the cavity until the resilient internal shoulder in the
insulator snaps into the locking groove in the contact.
The shoulder of the tool tip bottoms against the rear
of the insulator, preventing over-insertion. Repeat for
balance of contacts.
1. Place the proper insertion tip in the
insertion/-extraction handle and put the tip over the
wire as shown. The tool tip will butt up against the
crimp pot. Connector must be firmly supported
during both insertion and extraction operations.
CONTACT EXTRACTION
1. For contact extraction, remove the insertion tool
tip and replace it with the proper extraction tool tip.
(The socket tip will fit into the socket, and the pin
tip will slide over the pin bundle). Insert the tool tip
into the contact cavity: (the pin tip will butt up
against the shoulder of the pin contact, and the
socket tip will bottom out in the socket contact.)
2. Apply a firm, steady pressure until the contact is
released from the internal shoulder in the insulator. The
shoulder of the tool tip bottom against the insulator
face to prevent damage to the internal shoulder.
Remove the tool tip and pull the contact from the rear
of the connector. Repeat for the balance of contacts to
be removed.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
68
The Centi Line - .075" Contact Spacing
2D/CTA
CTA Assembly Instructions
INSERTION
2. Position the insertion tool tip on the rear of contact as
shown. The insulation must be pulled back from the crimp
pot approximately 1/32" to allow the tool tip to butt
against the contact crimp pot.
1. Place the connector into the slot in the assembly block
with the arrows on the insulator pointing downward. The
connector will bottom against the internal shoulder in the
groove in the assembly block. Start contact insertion by
placing the crimped contact in the cavity by hard.
.475 (12.06)
MAX.
.275 (6.98)
MAX.
Guide Posts
Polarizing Posts
4. The guide post and polarizing posts are inserted in teh
same manner as the contacts. The guide posts are inserted
into the socket insulator, and the polarizing posts are
inserted into the pin insulartor. The corresponding contact
in the mating insulator must be removed for each.
3. With firm steady pressure, push the contact into the
cavity until the resilient internal shoulder snaps into the
locking groove in the contact. To prevent over insertion,
the tool tip bottoms against the rear of the insulator.
EXTRACTION
2. The pin extraction tool tip is tubular, slides over the pin
bundle and butts against the front shoulder of the pin. The
socket extraction tool is a solid rod that fits into the socket
contact, the external shoulder butts against the contact
socket shoulder.
1. To extract the contacts, place the conector face up in
the assembly block so that the contact to be extracted is
in the end of the block that has a fully slotted opening.
3. Insert the extraction tool into the cavity and apply firm
pressure until the contact is pushed thru the rear of the
connector.
4. Lift the insulator from the groove and pull the contact
out. Repeat for balance of contacts to be removed.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
69
The NANO Line - .025" Contact Spacing
NANO contacts incorporate the highly reli-
able Twist Pin concept, which allows conti-
nuity in very dense areas and under severe
shock and vibration, requiring low engage-
ment and separation forces. Termination
can consist of uninsulated pigtails or insu-
lated wire all pre-harnessed at our factory
to your specifications.
Due to various industry application require-
ments the NANO line is available in several
different configurations, available in strip,
metal shell and plastic, rectangular or cir-
cular configurations with center jackscrew.
Successful applications for NANO connec-
tors are many and varied, from the Air
Force's AIRS program to actual human
implantations in the medical research field.
Specifications
NTP
NDM
NJS
NJSC
• Contact Rating - 1 amp max.
Type
Shell
Single Row
Strip
Metal Shell
Rectangular
Rectangular
Center Jackscrew Center Jackscrew
Circular
• Minimum contact centers - 0.025 (0.64).
• Wire sizes - #32 AWG stranded, #30 AWG solid.
• Contact termination - integral pigtail or multiple indent crimp.
• Contact rentention - fixed via epoxy.
Alum. alloy
2024 T351 per
QQ-A-250 or
6061-T6 per
QQ-A-200
• Contact materials - socket: nickel silver.
pin bundle: precious metal alloy or BeCu.
pin Sleeve: nickel silver or cartridge brass.
nickel plate
Insulator
Phenolic
Phenolic
Polyester
9, 24, 44
Polyester
• Mating/unmating force - 6oz. per contact max.
1-40
Contacts
9, 15, 21, 25
31, 37
27, 72, 266
No. of Contacts
Pin Bundle
Material
- Precious metal per ASTM B477 and ASTM B541, or BeCu per CDA alloy 172 & 102 -
- Nickel silver/ASTM B122, Comp. B-
Socket Sleeve
Material
Pin Sleeve
Material
- Nickel silver per ASTM B122, Comp. B or Cartridge Brass per CDA alloy 260 -
Test Data
The table below summarizes the results of key tests
performed in accordance with MIL-STD-202, where
applicable. Data is applicable to standard connec-
tor with standard terminations. Variations may
affect this data, so please consult the factory for
further information on your requirements.
Test
Method
Criteria of Acceptance
Dielectric Withstanding
Voltage
Method 301:
350 VAC at sea level
100 VAC at 70,000' altitude
No breakdown
No breakdown
Insulation Resistance
Thermal Shock
Method 302, Condition A
5,000 megohms minium
No physical damage
Method 107, Condition B:
-65˚C to +125˚C
Physical Shock
Method 213, Condition I:
100 G's, 3-axes, 6 millisecond No loss of continuity > 1 µ sec
duration sawtooth pluse
No physical damge
Vibration
Durability
Method 204, Condition D:
15 G's, 10-2,000 Hz, 12 hours No loss of continuity > 1 µ sec
No physical damge
500 cycles of mating and
unmating, 500 CPH max.
No mechanical or electrical defect
Insulation resistance > 100 megohms
Moisture Resistance
Salt Spray
Method 106, omit 7b
Method 101, Condition B:
48 hours
Shall be capable of mating and unmating,
and meet contact resistance requirements
Contact Resistance
Method 307:
With gold plated Be-
30 milliohms maximum
}
}
Cu Nanopin contact.
With precious metal
alloy Nanopin contact.
At 1 amp
At 100 milliamps
60 milliohms maximum
80 milliohms maximum
Contact Retention
-
3 lb. minimum axial load
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
70
Strip Connectors - .025" Contact Spacing
NT
How to Order - NT
NT
P
2
40
S
H * * *
R
RoHS COMPLIANCE
SERIES
INSULATOR MATERIAL
CONTACT LOCATION
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
MODIFICATION CODE
SERIES
TERMINATION MODIFICATION
Nano Strip
CONTACT ARRANGEMENTS
40 Maximum - .025 (0.64) centers
20 Maximum - .050 (1.27) centers
L - Solid uninsulated wire
T - One piece contact/lead
H - Insulated harness wire
INSULATOR MATERIAL
P - Phenolic
CONTACT TYPE
P - Pin (Plug)
CONTACT LOCATION
MODIFICATION CODE
For termination code, see NJS section,
page 73.
1 - Contacts on .025 (0.64) centers
2 - Contacts on .050 (1.27) centers
S - Socket (Receptacle)
Dimensions
NTP
.055
(1.40)
MAX.
.055
(1.40)
MAX.
.055
(1.40)
MAX.
B
B
B
.025 (0.64) TYP.
.025 (0.64) TYP.
.025 (0.64) TYP.
A
A
A
.160
(4.06)
MAX.
.220
(5.59)
MAX.
.080
(2.03)
Plug - "H" and "L"
Termination Types
Plug - "T"
Receptacle - "H", "L", and "T"
Termination Types
Termination Types
PartꢀNumber
A
B
PartꢀNumber
A
B
PartꢀNumber
A
B
PartꢀNumber
A
B
byꢀInsulatorꢀSize
Ref±
± ±010ꢀ 0±25ꢁ byꢀInsulatorꢀSize
Ref±
± ±010ꢀ 0±25ꢁ
.300 (7.62)
.325 (8.26)
.350 (8.89)
.375 (9.53)
.400 (10.16)
.425 (10.80)
byꢀInsulatorꢀSize
Ref±
± ±010ꢀ 0±25ꢁ
byꢀInsulatorꢀSize
Ref±
± ±010ꢀ 0±25ꢁ
.800 (20.32)
.825 (20.96)
.850 (21.59)
.875 (22.23)
.900 (22.86)
.925 (23.50)
.950 (24.13)
.975 (24.77)
NTPI-1*-**
NTPI-2*-**
NTPI-3*-**
NTPI-4*-**
NTPI-5*-**
NTPI-6*-**
NTPI-7*-**
NTPI-8*-**
NTPI-9*-**
NTPI-10*-**
-
.050 (1.27)
.075 (1.91)
.100 (2.54)
.125 (3.18)
.150 (3.81)
.175 (4.45)
.200 (5.08)
.225 (5.72)
.250 (6.35)
.275 (6.99)
NTPI-11*-**
NTPI-12*-**
NTPI-13*-**
NTPI-14*-**
NTPI-15*-**
NTPI-16*-**
NTPI-17*-**
NTPI-18*-**
NTPI-19*-**
NTPI-20*-**
.250 (6.35)
.275 (6.99)
.300 (7.62)
.325 (8.26)
.350 (8.89)
.375 (9.53)
NTPI-21*-**
NTPI-22*-**
NTPI-23*-**
NTPI-24*-**
NTPI-25*-**
NTPI-26*-**
NTPI-27*-**
NTPI-28*-**
NTPI-29*-**
NTPI-30*-**
.500 (12.70)
.525 (13.34)
.550 (13.97)
.575 (14.61)
.600 (15.24)
.625 (15.88)
.650 (16.51)
.675 (17.15)
.700 (17.78)
.725 (18.42)
.550 (13.97)
.575 (14.61)
.600 (15.24)
.625 (15.88)
.650 (16.51)
.675 (17.15)
.700 (17.78)
.725 (18.42)
.750 (19.05)
.775 (19.69)
NTPI-31*-**
NTPI-32*-**
NTPI-33*-**
NTPI-34*-**
NTPI-35*-**
NTPI-36*-**
NTPI-37*-**
NTPI-38*-**
NTPI-39*-**
NTPI-40*-**
.750 (19.05)
.775 (19.69)
.800 (20.32)
.825 (20.96)
.850 (21.59)
.875 (22.23)
.900 (22.86)
.925 (23.50)
.025 (0.64)
.050 (1.27)
.075 (1.91)
.100 (2.54)
.125 (3.18)
.150 (3.81)
.175 (4.45)
.200 (5.08)
.225 (5.72)
.400 (10.16) .450 (11.43)
.425 (10.80) .475 (12.07)
.450 (11.43) .500 (12.70)
.475 (12.07) .525 (13.34)
.950 (24.13) 1.000 (25.40)
.975 (24.77) 1.025 (26.04)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
71
NANO D Metal Shell - .025" Contact Spacing
NDM
How to Order - NDM
NDM- 9
P
T
* *
R
RoHS COMPLIANCE
SERIES
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
MODIFICATION CODE
SERIES
TERMINATION TYPE
NDM - NANO D Metal Shell
H = Insulated harness wire
L = Solid copper
CONTACT ARRANGEMENTS
9, 15, 21, 25, 31, 37
T = One piece contact/lead
MODIFICATION CODE
To specifiy lead lengths, type and mechanical
CONTACT TYPE
P = Pin (Plug)
modifications consult customer service.
S = Socket (Receptacle)
Dimensions
NDM
D
.083 +_ .004
(2.11 +_ 0.10)
DIA.TYP.
C
.025 (0.64) TYP.
.150 (3.81) MAX.
A
B
.130
(3.30) MAX
.004 +_ .004
.175 (4.44)
MAX.
(1.12 +_ 0.10)
Plug
D
.083 +_ .004
C
(2.11 +_ 0.10)
DIA.TYP.
.025 (0.64) TYP.
.150 (3.81) MAX.
A
B
.205 (5.21)
MAX.
.051 +_ .004
(1.30 +_ 0.10)
.155 (3.94) MAX.
Receptacle
Plug
B
Ref.
Receptacle
B
Ref.
Part Number
By Shell Size
A
Ref.
C
D
Max.
.ꢀꢀ0 ꢁꢀ.ꢂ13
.565 (14.35)
.715 (18.16)
.865 (21.97)
.965 (24.51)
1.115 (28.32)
1.265 (32.13)
NDM-9P*/S*
NDM-15P*/S*
NDM-21P*/S*
NDM-25P*/S8
NDM-31P*/S*
NDM-37P*/S*
.200 (5.08)
.317 (8.05)
.467 (11.86)
.617 (15.67)
.717 (18.21)
.867 (22.02)
1.017 (25.83)
.380 (9.65)
.530 (13.46)
.680 (17.27)
.780 (19.81)
.930 (23.62)
1.080 (27.43)
.725 (18.42)
.875 (22.23)
1.025 (26.04)
1.125 (28.58)
1.275 (32.39)
1.425 (36.20)
.350 (8.89)
.500 (12.7)
.600 (15.24)
.750 (19.05)
.900 (22.86)
Consult customer service for availability of other sizes.
Panel Mounting Dimensions
B
C
.086 .00ꢀ
+ ±..5ꢀ .±13ꢁ + ±..5ꢀ .±13ꢁ
- ±...ꢀ .±..ꢁ - ±...ꢀ .±..ꢁ
A
(2.18 0.10)
DIA. TYP
.032 (0.81) R TYP.
Size ± ±..5ꢀ .±13ꢁ
9
15
21
25
.565 (14.35)
.715 (18.16)
.865 (21.97)
.965 (24.51)
.261 (6.63)
.411 (10.44)
.561 (14.25)
.661 (16.79)
.811 (20.60)
.961 (24.41)
.095 (2.41)
.095 (2.41)
.095 (2.41)
.095 (2.41)
.095 (2.41)
.095 (2.41)
C
B
31 1.115 (28.32)
37 1.265 (32.13)
A
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
72
Center Jackscrew - .030" Contact Spacing
NJS
How to Order - NJS
NJS - 24
P
H * * *
R
RoHS COMPLIANCE
SERIES
CONTACT ARRANGEMENTS
CONTACT TYPE
TERMINATION TYPE
TERMINATION CODE
TERMINATION CODE*
SERIES
NJS - Nano center jackscrew rectangular (9,
(H) 001 = 18" #32 AWG 7/40 strd. Type
"ET" Teflon per MIL-W-16878/6,
color yellow.
24, 44)
NJSC - Nano center jackscrew circular (27, 72
266)
(H) 003 = 18" #32 AWG 7/40 strd. Type
"ET" Teflon per MIL-W-16878/6
color coded to MIL-STD-681, Sys-
tem 1.
CONTACT ARRANGEMENTS
9, 24, 27, 44, 72, 266
CONTACT TYPE
P = Pin (Plug)
(L) 1 = 1/2" uninsulated solid #30 AWG
gold plated copper.
S = Socket (Receptacle)
(L) 2 = 1" uninsulated solid #30 AWG gold
plated copper
TERMINATION TYPE
(T)* = Consult customer service
H = Insulated harness wire
L = Solid uninsulated wire
T = One piece contact/Lead
* See Termination Codes shown below for additional length modification codes.
Standard Wire Termination Codes
The following termination codes are listed for your information. For additional codes please refer to Appendix on page 80 and 82. All wire lengths ae minimum.
Harness Type (H)
#32 AWG, 7/40 stranded, Type "ET" per MIL-W-16878/6
Solid Uninsulated Type (L)
#32 AWG gold plated copper.
Length
3 (76.2)
All Yellow
H 020
H 019
H 026
H 029
H 028
H 001
H 038
Color Coded
H 027
Length
24 (609.6)
30 (762.0)
36 (914.4)
48 (1219.2)
72 (1828.8)
120 (3048.0)
All Yellow
H 009
Color Coded
H 004
Code
L61
L56
L57
L39
L58
L1
Length
Code
L14
L2
Length
.125 (3.18)
.150 (3.81)
.190 (4.83)
.250 (6.35)
.375 (9.53)
.500 (12.70)
.750 (19.05)
1.000 (25.40)
1.500 (38.10)
2.000 (50.80)
2.500 (63.50)
3.000 (76.20)
6 (152.4)
8 (203.2)
10 (254.0)
12 (304.8)
18 (457.2)
20 (508.0)
H 016
H 010
H 005
H 034
H 011
H 006
L7
H 025
H 013
H 048
L6
H 002
H 017
H 046
L16
L10
H 003
H 042
H 041
H 023
Center Jackscrew/Rectangular
NJS-9 & NJS-24
1
9
5
4
B
B
D
8
0-80 UNF-2B
THREADED INSERT
C
C
A
Face View Pin Insert
Receptacle Side View
B
Plug Side View
A
C
D
Part Number
Max.
Max.
.ꢀꢀ0 ꢁꢀ.ꢂ13
.ꢀꢀ0 ꢁꢀ.ꢂ13
NJS-9P*
NJS-9S*
NJS-24P*
NJS-24S*
NJSC-266
NJSC-72
NJSC-44
NJSC-27
.255 (6.48)
.165 (4.19)
.138 (3.51)
.116 (2.95)
.116 (2.95)
.116 (2.95)
.116 (2.95)
.116 (2.95)
.116 (2.95)
.116 (2.95)
.116 (2.95)
.255 (6.48)
.435 (11.05)
.435 (11.05)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.165 (4.19)
.078 (1.98)
.138 (3.51)
.078 (1.98)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
73
Center Jackscrew - .030" Contact Spacing
NJS
Contacts
.060 (1.52) MAX.
EPOXY WICKING
.011
(.28)
REF.
SOCKET
CONTACT
.011
(.28)
REF.
.062 (1.57)
0.90 .010
REF.
PIN CONTACT
WITH THRU-BUNDLE
PIGTAIL
(2.29 0.25)
GUIDE POST
(OPTIONAL WITH LOSS OF CONTACT
.100 (2.54) MAX
EPOXY
WICKING
EPOXY RETAINING
CONTACT INSULATOR
Socket View
Pin View
(Thru-Bundle Contact)
Pin View
(Crimp-Type Contact
NOTE: Guide posts can be installed in any contaact cavity for polarization purposes.
Connector Saver
NJS-9P & S
.128
(3.25)
REF.
#0-80 UNF-2A
GUIDE POST
CAVITY
(open)
.062
(1.57)
REF.
Part Number: NJS97294-835
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
74
Custom Cable Assemblies
Our product portfolio has been devel-
ITT manufactures complete cable
oped and is continuing to be developed
to provide our customers with new and
better technologies that offer superior
system level performance while lowering
assemblies worldwide at locations in
Santa Ana California, Basingstoke UK,
and Nogales Mexico. The various engi-
neering and manufacturing centers of
overall system level costs. Our corporate excellence are utilized to best fit various
culture in Six Sigma Methodologies
allows ITT to continuously challenge our
Engineering and Scientific professionals
to develop new processes and technolo-
gies in Material Science, Automation,
and Testing to ensure that our cus-
tomers get the best cost effective harsh
environment cable assemblies from ITT.
You should expect no less from an
Industry leader.
cable assembly and product platform
specialties to provide our customers
with the most cost effective solutions.
The following paragraphs highlight sev-
eral examples of interconnect cable
assemblies for various Market segments
that ITT services. These examples rep-
resent just a snapshot of the many cus-
tom micro interconnects or cable
assemblies that ITT can provide the
industry.
Dynamic Custom Cable Assemblies
for Harsh Environments
ITT has been a world leader in designing
and manufacturing harsh environment
micro interconnects and cable assem-
blies for over fifty years. In addition, our
historical product and assembly expert-
ise dates back over 85 years to the
founding of the original ITT Cannon.
Today, we provide complete turnkey
cable assemblies for all of ITT’s micro
connector portfolio including: Cent Line
Interconnects, MDM series, M83513
Series, MEB series, MDM Mixed Signal
Packages, MT strip interconnects, micro
miniature circular MIK series, and our
high density Nano Connectors. Our
cable assembly expertise has allowed
ITT to develop innovative Six Sigma
driven manufacturing processes that
allows our customers a full breadth of
tight pitch cable assemblies in 0.100,
0.075, 0.050, and 0.025 contact spacing.
Space Grade Micro Interconnect
cable assemblies
ITT has been deciding and manufactur-
ing Space Rated interconnects and
cable assemblies since the beginning of
the US space Program in the mid 20th
century. Prior to the MIL DTL M83513
specification ITT had been qualified for
all NASA GSFC performance and speci-
fication requirements, on numerous
satellite and space launch systems. ITT’s
Engineering and Product teams have
over 200 years of combined experience
in design, manufacture, and test of
Space flight interconnects and cable
assemblies. Our expertise in material
science, manufacturing processes, out
gassing, testing and screening, Magnetic
permeability, and Cryogenics has given
ITT a tremendous understanding in
developing high reliability space system
interconnects and cable assemblies .
Custom Micro D and M83513
Interconnect cable
assemblies
As one of the original developers of the
Micro Interconnect technology, ITT has
been an industry innovator in providing
complete harsh environment cable
assemblies and stretching the state of
art in such areas as: Filtering, Hermetics,
moisture barriers, High Speed and
Mixed Signal Packages, EMI suppres-
sion, and multiple cable types. Most of
ITT’s custom cable assemblies utilize our
standard Micro pin contact system.
However, ITT does use other types of
contact systems when manufacturing
mixed signal interconnect systems
where signal speed and power contacts
will be incorporated into a complete
cable assembly solution.
ITT’s harsh environment interconnects
and cable assemblies are used in the
most demanding applications and envi-
ronments. You will find our products in
such markets as: Aerospace, Defense
Electronics, Geophysical Exploration,
High Speed Computer Networking,
Industrial Automation, Medical
All of ITT’s Space rated micro intercon-
nect assemblies utilize ITT QPL M83513
connectors. These cable assemblies are
tested to meet the most stringent per-
formance requirements as outlined by
numerous NASA GSFC specifications.
Additional performance and test require-
ments beyond existing NASA GSFC
guidelines can always be tailored so that
additional custom test programs can be
incorporated.
Electronics, Satellite and Space
Communications, and
Telecommunications. Our complete
interconnect solutions have flown on
every major Aircraft and Space platform
since the 1940’s. In fact, many aircraft
mechanics still refer to ITT Cannon con-
nector and cable assemblies as the
Aviation standard.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
75
Custom Cable Assemblies
High Temperature Harsh Environment
Interconnect Assemblies
Medical Electronics Cable
Assemblies:
The proliferation of deep water drilling
As microminiaturization continues in the
prospects in the world’s oceans has cre- medical technologies field so the contri-
ated increased performance demands
for micro miniature interconnects and
cable assemblies for down hole oil field
exploration. Not only are new fields
being discovered in ocean depths
greater than five miles but the wells
themselves are being drilled deeper into
butions of ITT’s micro interconnect
devices and assemblies. Our custom
medical assemblies are utilized in such
applications as: patient monitoring, diag-
nostics, imaging, and disposable sys-
tems. These types of application have
been well served by ITT’s Nano, MT strip
the earths crust, sometimes to depths of and MIKQ series of interconnects. In
30,000 feet. Thus, the temperature addition to there specific connector
extremes in excess of 200 degrees C are types, ITT is well experienced in the
becoming the norm. In this the most
demanding of environments, ITT has
been designing and manufacturing such
micro interconnect connector and cable
assemblies for over forty years. Again
our engineering and manufacturing
expertise in the material science of
Liquid Crystal Polymer (LCP), flourosili-
cones, plating, metals, and high temper-
ature epoxies is leading ITT to develop
high temperature performance beyond
200 degree C operating temperatures.
careful selection of medical grade cables
and termination materials to ensure fully
compliant med. cal cable assemblies.
Shown below is an example of ITT’s
MIKQ high strength plastic circular
quick disconnect connector cable
assembly for a medical application.
Pictured below is an ITT high tempera-
ture nano interconnect assembly. ITT is
developing new products around this
nano interconnect platform that will not
only increase signal density but will
include new material’s and processes for
higher temperature applications.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
76
Flex Circuit Cable Assembly
Terminating to Flexible Circuits
Diagram 1 shows details of the pad spacing and the
suggested amount of material to be left between the
end of the pad A and the edge of the flex B.
0,51 (.020)
A
B
2,16 (.085)
1,27 (.050)
0,51 (.020)
COVERLAY
EXTENDS
INTO
Ideally, for a low profile and a neat finish, it is
best to terminate flexible circuits in line with
the contacts. Since most Microminiature
connectors have contacts set into two or
POTTING
Diagram 2 illustrates how the connector is
preparedwithshortpigtailsandaspecialfirst
potwhichjustcapturesthecontacts.Thefinal
back potting for strength is controlled by our
standard 7,00 (.275) potting fixtures.
three rows, termination is a simple process.
6,99
(.275)
The diagrams opposite are basically a design
guide for pad arrangements, to suit MDM con-
nectors in particular and to ensure the circuits
enter the potting well. The length of the pad is
optional but of course it is important to pro-
vide enough coverlay, especially at the edges
of the circuit, to avoid de-lamination. We sug-
gest at least 0,51 mm (.020 inches). Our stan-
dard potting shrouds provide support to the
circuit with a dimension of 7,00 mm (.275
inches) from the rear of the flange.
4,98
(.196)
2,00 (.079)/1,53 (060)
FIRST POTTING LEVEL
TO RETAIN CONTACTS
Please consult Customer Service for specific
flex circuit assembly design considerations
and requirements.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
77
Custom Back Shells
Custom Back Shell Systems
ITT has designed numerous back shell solutions for
micro miniature interconnects for many harsh envi-
ronment applications. Although ITT does not offer a
standard back shell portfolio today, we can design
and manufacture a range of back fittings for our
MDM connector products depending on the cus-
tomer requirements. Utilizing one of our partnership
relationships, one of our UK based micro product
groups of ITT can provide can provide custom
designs utilizing proven banded systems in which
the braid is captivated over a chimney style outlet.
These types of back shell systems are available in
different material finishes and sizes and can be pro-
vided with special process termination methods. In
addition, ITT has developed a method of riveting the
back fitting to the shell within the jacking area. This
option guarantees 360 degree shielding effective-
ness even when jackscrews or jacking posts are not
being used.
In addition to the above ITT can provide special
back potting style termination systems for environ-
mental protection and strain relief. These types of a
back shell style system are typically filled with epoxy
or other encapsulating materials to provide a robust
and effective back shell system.
Where a conduit system is preferred such as for test
box environments in field locations, back fittings and
a fully screened weatherproof convoluted trunking
can be provided
Sealing Gaskets
We have received requests for gasket materials to seal the MDM connectors into various enclosures. We recommend that you consider wider flanged connectors
together with a low cost conductive gasket to provide an adequate surface area. This combination will give you IP-66 sealing with good EMC compliance. The follow-
ing dimensions for gaskets and flange dimensions are regarded as the minimum that you should consider.
Conductive elastomers generally offer a superior shielding performance when compared with alternatives as in table below.
Gasket Type
Neoprene (wire
impregnated)
Silicone (wire
impregnated)
Silicone
(oriented wire)
Neoprene
(fabric wrap)
Metallic
finger stock
Metallic fibres
Conductive
silicone rubber
Shielding performance
Temperature range
IP sealing
S
S
P
G
S
P
S
S
S
G
P
G
S
P
S
S
G
G
S
G
S
G
S
S
G
S
S
G
G
P
S
S
G
G
P
G
G
P
S
P
P
P
P
G
G
G
S
S
S
G
G
Compression force
Compression range
Surface texture
Compression set
Re-usability
G
G
G
G
G
* Neoprene is a trademark of Dupont P = Poor
S = Satisfactory
G = Good
Conductive rubber gaskets can be loaded with many different metallic fillers but the choice of material is dependent upon a number of factors such as level of con-
ductivity, shielding effectiveness, galvanic compatibility and cost.
Galvanic Corrosion can occur when two dissimilar metals are in contact with one another in the presence of an electrolyte. The type of gasket material has to be
assessed because of the use of metallic fillers. Many applications are dry indoor environments where corrosion is not a major concern. However, for external use,
particularly marine, it is recommended that consideration be given to compatibility. The table on the next page is a summary.
Enclosure Material
aluminum alloys
Magnesium alloys
Stainless steel
Copper alloys
Silver/Nickel
Silver/Copper
Silver/aluminum
Inert aluminum
Silver/Glass
Silver
Nickel/Graphite
Nickel
L
X
X
X
X
X
X
X
X
l
l
L
l
l
L
l
l
L
l
L
L
L
L
L
L
L
L
L
L
L
L
L
Cadmium plating
Tin plating
X
X
X
X
X
l
l
l
L
l
l
l
L
L
L
l
L
l
L
l
L
L
L
L
L
L
L
L
L
L
Nickel plating
l
L
L
L
L
L
L
L
Chromium plating
Silver plating
L
L
Zinc & galvanise plating
Titanium
X
X
X
X
l
L
l
L
l
L
l
L
L
L
L
L
L = good
l = Satisfactory
X = Not recommended
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
78
Appendix
“L” Code Chart
SORTED BY LENGTH
Wire Length, IN.
SORTED BY CODE
Wire Length, IN.
Decimal
Fraction
Code
Code
Decimal
Fraction
0.080
0.094
0.110
0.125
0.140
0.150
0.171
0.187
0.190
0.210
0.250
0.312
0.375
0.380
0.500
0.625
0.750
1.000
1.500
2.000
2.250
2.500
3.000
3.500
4.000
4.500
5.000
6.000
7.000
8.000
9.000
10.000
11.500
12.000
15.000
18.000
20.000
L63
L62
L65
L61
L67
L56
L66
L17
L57
L59
L39
L60
L58
L64
L1
L1
L2
0.500
1.000
6.000
12.000
20.000
2.000
1.500
7.000
5.000
3.000
4.000
0.625
10.000
0.750
3.500
2.500
0.187
8.000
2.250
4.500
0.250
9.000
15.000
11.500
18.000
0.150
0.190
0.375
0.210
0.312
.0125
0.094
0.080
0.380
0.110
0.171
0.140
1/2
3/32
1/8
L3
L4
L5
L6
L7
3/16
L8
L9
L10
L11
L12
L13
L14
L15
L16
L17
L18
L25
L28
L39
L45
L46
L52
L55
L56
L57
L58
L59
L60
L61
L62
L63
L64
L65
L66
L67
1/4
3/8
3/8
5/8
3/4
1/2
5/8
3/4
L12
L4
3/16
1/4
L2
L7
L6
L25
L16
L10
L15
L11
L28
L9
L3
3/8
L8
L18
L45
L13
L52
L4
5/16
1/8
3/32
L46
L55
L5
#25AWG, SOLID COPPER WIRE PER QQ-W-343,
TYPE “S”, GOLD PLATED PER MIL-G-45204, TYPE
II GRADE C OR D, CLASS 1 (50 MICROINCHES
MINIMUM)
Nano “L” Code Charts on page 80.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
79
Appendix
“L” Code Chart (for Nano products only)
SORTED BY LENGTH
Wire Length, IN.
SORTED BY CODE
Wire Length, IN.
Decimal
Fraction
Code
Code
Decimal
0.500
Fraction
0.080
0.094
0.110
0.125
0.140
0.150
0.171
0.187
0.190
0.210
0.250
0.312
0.375
0.380
0.500
0.625
0.750
1.000
1.500
2.000
2.250
2.500
3.000
3.500
4.000
4.500
5.000
6.000
7.000
8.000
9.000
10.000
11.500
12.000
15.000
18.000
20.000
L63
L62
L65
L61
L67
L56
L66
L17
L57
L59
L39
L60
L58
L64
L1
L1
1/2
3/32
1/8
L2
1.000
6.000
12.000
20.000
2.000
1.500
7.000
5.000
3.000
4.000
0.625
10.000
0.750
3.500
2.500
0.187
8.000
2.250
4.500
0.250
9.000
15.000
11.500
18.000
0.150
0.190
0.375
0.210
0.312
.0125
0.094
0.080
0.380
0.110
0.171
0.140
L3
L4
L5
L6
L7
3/16
L8
L9
L10
L11
L12
L13
L14
L15
L16
L17
L18
L25
L28
L39
L45
L46
L52
L55
L56
L57
L58
L59
L60
L61
L62
L63
L64
L65
L66
L67
1/4
3/8
3/8
5/8
3/4
1/2
5/8
3/4
L12
L4
3/16
1/4
L2
L7
L6
L25
L16
L10
L15
L11
L28
L9
L3
3/8
L8
L18
L45
L13
L52
L4
5/16
1/8
3/32
L46
L55
L5
#30AWG, SOLID COPPER WIRE PER QQ-W-343,
TYPE “S”, GOLD PLATED PER MIL-G-45204, TYPE
II GRADE C OR D, CLASS 1 (50 MICROINCHES
MINIMUM)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
80
Appendix
“H” Code Charts
16878/4
22759/11-26
22759/33-26
Wire, Electrical, Polyetrafluorethylene (PTFE)
Insulated, 200 Degrees C, 600 Volts, Extruded
Insulation
Wire, Electrical, Fluoropolymer-Insulated, Extruded
TFE, Silver-Coated Copper Conductor, 600 Volt
Wire, Electrical, Fluoropolymer-Insulated, Crosslinked
Modified, ETFE, Lightweight, Silver-Coated, High-
Strength Copper Alloy 200 Degrees C, 600 Volt
10 Color
Repeat
Length
Yellow
White
System 1
Length
White
System 1
10 Color
Repeat
1
030
024
020
–
C30
C24
C20
C33
C31
047
C26
C15
C29
008
C39
C36
044
C38
C55
045
C10
C18
058
C37
021
C13
C40
C14
059
C32
C22
C35
C42
C43
A30
A24
027
033
A31
016
034
A15
025
002
A39
A36
003
023
A55
004
005
A18
006
A37
A12
048
A40
056
046
A32
A22
A35
041
A43
1
2
G30
G24
G20
G33
G31
065
G26
G15
G29
066
G39
G36
067
G38
G55
068
G10
G18
069
G37
G12
070
G40
G14
071
G32
G22
G35
G42
G43
Y30
Y24
Y20
Y33
Y31
Y19
Y26
Y15
Y29
Y28
Y39
Y36
Y01
Y38
Y55
Y09
Y10
Y18
Y11
Y37
Y12
Y13
Y40
Y14
Y17
Y32
Y22
Y35
Y42
Y43
H30
H24
H20
H33
H31
072
H26
H15
H29
073
H39
H36
074
H38
H55
075
H10
H18
076
H37
H12
077
H40
H14
078
H32
H22
H35
H42
H43
Length
White
System 1
2
1
2
V30
V24
V20
V33
V31
V19
V26
V15
V29
V28
V39
V36
V01
V38
V55
V09
V10
V18
V11
V37
V12
V13
V40
V14
V17
V32
V22
V35
V42
V43
W30
W24
W20
W33
W31
W19
W26
W15
W29
W28
W39
W36
W01
W38
W55
W09
W10
W18
W11
W37
W12
W13
W40
W14
W17
W32
W22
W35
W42
W43
X30
X24
X20
X33
X31
X19
X26
X15
X29
X28
X39
X36
X01
X38
X55
X09
X10
X18
X11
X37
X12
X13
X40
X14
X17
X32
X22
X35
X42
X43
3
3
4
4
3
5
031
019
026
015
029
028
039
036
001
038
055
009
010
018
011
037
012
013
040
014
017
032
022
035
042
043
5
4
6
6
5
8
8
6
9
9
8
10
12
16
17
18
20
21
24
30
35
36
40
42
48
50
60
72
80
92
96
120
180
10
12
16
17
18
20
21
24
30
35
36
40
42
48
50
60
72
80
92
96
120
180
9
10
12
16
17
18
20
21
24
30
35
36
40
42
48
50
60
72
80
92
96
120
180
Nano “H” Code Charts on page 82.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
81
Appendix
“H” Code Charts (for Nano products only)
MIL-W-16878/6
Wire, Electrical, Polyetrafluorethylene (PTFE)
Insulated, 200 Degrees C, 250 Volts, Extruded
Insulation
Length
Yellow
White
System 1
1
2
030
024
020
–
C30
C24
C20
C33
C31
047
C26
C15
C29
008
C39
C36
044
C38
C55
045
C10
C18
058
C37
021
C13
C40
C14
059
C32
C22
C35
C42
C43
A30
A24
027
033
A31
016
034
A15
025
002
A39
A36
003
023
A55
004
005
A18
006
A37
A12
048
A40
056
046
A32
A22
A35
041
A43
3
4
5
031
019
026
015
029
028
039
036
001
038
055
009
010
018
011
037
012
013
040
014
017
032
022
035
042
043
6
8
9
10
12
16
17
18
20
21
24
30
35
36
40
42
48
50
60
72
80
92
96
120
180
www.ittcannon.com
82
Appendix
MIL-STD-681 Wire Color Code
Reference Data
PIN MIL-STD-681 Base
First
Stripe
Second
Stripe
Third
Stripe
PIN MIL-STD-681 Base
First
Stripe
Second
Stripe
Third
Stripe
No.
No.
Color
No.
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
No.
Color
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
1*
0
BLK
957
GRN
GRN
BLU
BLU
VIO
VIO
GRY
VIO
2*
1
BRN
RED
ORN
YEL
958
3*
2
967
4*
3
968
GRY
GRY
BRN
BRN
BRN
BRN
BRN
BRN
BRN
RED
RED
RED
RED
RED
RED
ORN
ORN
ORN
ORN
ORN
YEL
5*
4
978
6*
5
GRN
BLU
9012
9013
9014
9015
9016
9017
9018
9023
9024
9025
9026
9027
9028
9034
9035
9036
9037
9038
9045
9046
9047
9048
9056
9057
9058
9067
9068
9078
9123
9124
9125
9126
9127
9128
9134
9135
9136
9137
9138
9145
9146
9147
9148
9156
9157
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
BRN
RED
ORN
YEL
GRN
BLU
VIO
7*
6
8*
7
VIO
9*
8
GRY
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
WHT
10*
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
9
90
BLK
BRN
RED
ORN
YEL
91
GRY
ORN
YEL
GRN
BLU
VIO
92
93
94
95
GRN
BLU
VIO
96
97
GRY
YEL
GRN
BLU
VIO
98
GRY
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BLK
BRN
BRN
BRN
BRN
BRN
BRN
BRN
RED
RED
RED
RED
RED
RED
ORN
ORN
ORN
ORN
ORN
YEL
901
902
903
904
905
906
907
908
912
913
914
915
916
917
918
923
924
925
926
927
928
934
935
936
937
938
945
946
947
948
956
BRN
RED
ORN
YEL
GRN
BLU
VIO
GRY
GRN
BLU
VIO
YEL
YEL
GRY
RED
ORN
YEL
GRN
BLU
VIO
YEL
GRY
BLU
VIO
GRN
GRN
GRN
BLU
BLU
VIO
GRY
VIO
GRY
GRY
ORN
YEL
GRN
BLU
VIO
GRY
ORN
YEL
GRN
BLU
VIO
RED
RED
RED
RED
RED
RED
ORN
ORN
ORN
ORN
ORN
YEL
GRY
YEL
GRN
BLU
VIO
GRY
YEL
GRN
BLU
VIO
GRY
GRN
BLU
VIO
GRY
GRN
BLU
VIO
YEL
YEL
YEL
YEL
YEL
GRY
BLU
VIO
YEL
GRY
BLU
GRN
GRN
GRN
* 10 colors repeat is the standard wire color code for 83513-Style connectors.
www.ittcannon.com
83
Terminology
Adhesive dispensing: a computer-controlled machine automatically dispenses epoxy adhesive.
Backmolding: this term refers to the process of transfer-molding epoxy performs into a old. The epoxy is heated and pressurized, much like
conventional plastic molding.
Backpotting: the application of epoxy to connector wire terminations for strain relief and sealing. Epoxy is dispensed with pneumatic
syringes. Standard Micro products have built-in potting wells to contain the epoxy, but optional potting in custom configurations is
accomplished with inexpensive molds.
Brady labels: wraparound adhesive labels for multi-conductor cable.
Breakout: the area where one or more cables are joined together. A breakout frequently requires splices and extra strain relief such as cable
ties or tubing.
Electrical testing: Hi-pot, insulation resistance, and continuity testing are standard tests for cable assemblies.
Etching: etching is a chemical process to prepare certain types of Teflon insulated wire for potting. Without etching, the epoxy will not bond
properly.
Expando: braided sleeving used to protect a wire bundle. The simplest and least expensive method of jacketing a cable, expando tubing is
made of abrasion-resistant nylon or other materials. The ends of the tubing are usually encapsulated in epoxy.
Header: a general term for any printed circuit board mounted connector used as an I/O port.
Hot stamping: insulated wire is imprinted with identification numbers or text.
Hot-stamped heat shrink tubing: used for multi-conductor cables, heat shrink tubing is impression stamped, then installed on the cable and
shrunk.
Ink-jet marking: dots of ink are sprayed through a stationary nozzle onto a part moving on a conveyer. Ink jet marking is now standard.
Ink-stamping: the traditional method of placing metal type in a marking machine which is inked with a roller. The metal type transfers the ink
to a rubber pad, and the part is pressed onto the pad. Oven curing is required.
Jumper Cable: this term usually applies to a short cable assembly that plugs into a printed circuit board one one end, with the other end
mounted in an I/O panel.
Lacing: the process of tying individual wires together into bundles. Special lacing tape is used.
Laser stripping: insulation is removed from the wire by using a special laser stripping machine. Typically used on flat cable.
Mass-termination: simultaneous termination of multiple contacts. Normally associated with IDC termination, mass termination is also used on
micropins in a special multi-contact crimp tool.
Pigtail: a single-ended cable assembly having one connector on one end and unterminated wire on the other end.
Potting: the application of various adhesives to a connector. Potting encapsulates the wires or terminals, providing environmental sealing and
strain relief.
Silkscreening: Ink is transferred through a screen.
Stripping: insulation is removed from wire ends on automatic cut and strip equipment.
Thermal Shock: a conditioning environmental test that cycles a part repeatedly through a specified temperature range. Thermal shock is fre-
quently performed prior to pressure testing.
Tinning: the application of molten solder to connector terminals. Micro products are tinned on a fully automatic machine with cleaning, pre-
heating and inert gas tinning. Pre-tinned leads ensure excellent solderabillity.
Wire marking: individual numbered adhesive tags are attached to each wire.
Wire striping: insulated wire from #24 thru #28 AWG is striped with colors for circuit identification.
Wiring fixtures: flat wiring boards or more complicated three-dimensional fixtures are required for many multi-branched cable harnesses.
Mating connectors are fixtured in the exact position of the end use equipment, and the cable assembly is built on the fixture.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
84
Product Safety Information
THIS NOTE MUST BE READ IN CON-
JUNCTION WITH THE PRODUCT DATA
3. HANDLING
Care must be taken to avoid damage
(iii) Other important information
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog and
data sheets.
SHEET/CATALOG.
FAILURE
TO
to any component parts of electrical connec-
tors during installation and use. Although
there are normally no sharp edges, care
must be taken when handling certain compo-
nents to avoid injury to fingers. Electrical
connectors may be damaged in transit to the
customers, and damage may result in cre-
ation of hazards. Products should therefore
be examined prior to installation/use and
rejected if found to be damaged.
OBSERVE THE ADVICE IN THIS INFOR-
MATION SHEET AND THE OPERATING
CONDITIONS SPECIFIED IN THE PROD-
UCT DATA SHEET/ CATALOG COULD
RESULT IN HAZARDOUS SITUATIONS.
“Engineered for life” is a registered trade-
mark of ITT Inc. ©2017. All other
trademarks or registered trademarks are
property of their respective owners. All data
subject to change without notice.
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials. They contain conduct-
ing and non-conducting materials and can be
divided into two groups.
4. DISPOSAL
Incineration of certain materials may release
a) Printed circuit types and low cost audio
types which employ all plastic insulators and
casings.
noxious or even toxic fumes.
5. APPLICATION
b) Rugged, Fire Barrier and High Reliability
types with metal casings and either natural
rubber, synthetic rubber, plastic or glass
insulating materials. Contact materials vary
with type of connector and also application
and are usually manufactured from either:
Copper, copper alloys, nickel, alumel,
chromel or steel. In special applications,
other alloys may be specified.
Connectors with exposed contacts should
not be selected for use on the current supply
side of an electrical circuit, because an elec-
tric shock could result from touching exposed
contacts on an unmated connector. Voltages
in excess of 30 V ac or 42.5 V dc are poten-
tially hazardous and care should be taken to
ensure that such voltages cannot be trans-
mitted in any way to exposed metal parts of
the connector body. The connector and
wiring should be checked, before making
live, to have no damage to metal parts or
insulators, no solder blobs, loose strands,
conducting lubricants, swarf, or any other
undesired conducting particles. Circuit resist-
ance and continuity check should be made to
make certain that there are no high resist-
ance joints or spurious conducting paths.
Always use the correct application tools as
specified in the Data Sheet/Catalog. Do not
permit untrained personnel to wire, assemble
or tamper with connectors. For operation
voltage please see appropriate national reg-
ulations.
2. FIRE CHARACTERISTICS AND ELEC-
TRIC SHOCK HAZARD
There is no fire hazard when the connec-
tor is correctly wired and used within the
specified parameters. Incorrect wiring or
assembly of the connector or careless
use of metal tools or conductive fluids, or
transit damage to any of the component
parts may cause electric shock or burns.
Live circuits must not be broken by sepa-
rating mated connectors as this may
cause arcing, ionization and burning.
Heat dissipation is greater at maximum
resistance in a circuit. Hot spots may occur
when resistance is raised locally by damage,
e.g. cracked or deformed contacts, broken
strands of wire. Local overheating may also
result from the use of the incorrect applica-
tion tools or from poor quality soldering or
slack screw terminals. Overheating may
occur if the ratings in the product Data
Sheet/Catalog are exceeded and can cause
breakdown of insulation and hence electric
shock. If heating is allowed to continue it
intensifies by further increasing the local
resistance through loss of temper of spring
contacts, formation of oxide film on contacts
and wires and leakage currents through car-
bonization of insulation and tracking paths.
Fire can then result in the presence of com-
bustible materials and this may release nox-
ious fumes. Overheating may not be visually
apparent. Burns may result from touching
overheated components.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating volt-
age. The admissible operating voltages
depend on the individual applications and the
valid national and other applicable safety
regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due to
PC board and/or harnessing.
(ii) Temperature
All information given are temperature limits.
The operation temperature depends on the
individual application.
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
85
Circular/Filter/Hermetic Connectors
As a world leader in circular, filter, and hermetic connectors, ITT
can leverage its design and manufacturing expertise to fit
virtually any application. Our expertise includes fast positive
mating for a wide range of military applications, as well as
numerous sizes and contact configurations for various harsh
environments.
D-Subminiature Connectors
Cannon invented D-sub connectors in 1952. Our family
of D-Subs now includes combinations of signal, power and RF, as
well as severe service sealed connectors. Cannon D-Subs are
available with an extensive line of backshells and accessories
and are one of the most economical shielded connector
solutions available.
Fiber Optic Connectors and Cable Assemblies
Cannon fiber optic solutions provide an excellent performance/
cost value. Performance may be tailored to the end system, with
our use of superior materials and bonding agents providing
highly effective solutions. Our wide variety of products include
fiber optic hybrid contacts, multi-channel, rack and panel and hi-
rel assemblies.
Microminiature Connectors
Developed first by Cannon in the 1960s, Microminiature Connectors
offer high performance and reliability with exceptional versatility.
Available in rectangular, circular and strip-style configurations for
countless applications, many of our highly engineered
Microminiature connector products meet critical customer demands
in multiple applications across the Aerospace & Defense industry.
Rack and Panel Connectors
Pioneered by Cannon during the 1930s, our Rack & Panel
Connectors offer an unmatched variety of shell configurations and
insert arrangements, as well as materials, plating and contact
options. Today, we are recognized as an industry leader, offering
an unparalleled range of off-the-shelf and custom Rack & Panel
products to align with customer needs.
RF Connectors
ITT Cannon has been providing interconnect products to the
Microwave and RF industry since 1963 (formerly The Sealectro
Corporation). The RF 50 & 75 Ohm product lines cover UHF band
through Ku band requirements. These connectors and cable
assemblies are available with a thread type, snap type, bayonet
type or slide on coupling method. The frequencies range from DC
to 18+ GHz.
ITT Cannon is a leading global manufacturer of connector products serving international
customers in the aerospace and defense, medical, energy, transportation and industrial end
markets. Whether delivering critical specs to aircraft pilots, streaming data through
communications satellites or enabling ultrasound technology that gives an expectant mother the
first glimpse of her unborn child, Cannon connects the world’s most important information with the
people who need it. To learn more, visit www.ittcannon.com
Cannon Microminiature
Connectors Customer
Support Locations
ASIA
Tuopandun Industrial Area, Jinda Cheng,
Xiner Village, Shajing Town,
Baoan District, Shenzhen City,
Guangdong, China 518125
Phone: 86.755.2726.7888
Fax:
86.755.2726.7515
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: 49.7151.699.0
fax:
49.7151.699.217
ITALY
Corso Europa 41/43
Lainate (MI),
Italy 20020
phone: 39.02938721
fax:
39.0293872300
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: 44.1256.311200
fax:
44.1256.323356
USA
56 Technology Drive
Irvine, CA 92618
phone: 1.800.854.3028
fax:
1.714.628.2142
©2017 ITT Inc. | ITT Cannon Microminiature Connectors Catalog | 20170724
“Engineered for life” and “Cannon” are registered trademarks of ITT Inc.
Specification and other data are based on information available at the time of
printing, and are subject to change without notice.
www.ittcannon.com
Our facility is not currently certified by the DLA and this product is not covered
by the QPL/QML.
相关型号:
MJSB-51SH004
Board Connector, 51 Contact(s), 3 Row(s), Female, 0.05 inch Pitch, Wire Terminal, #1-64, Green Insulator, Receptacle
ITT
MJSB-51SH006
Board Connector, 51 Contact(s), 3 Row(s), Female, 0.05 inch Pitch, Wire Terminal, #1-64, Green Insulator, Receptacle,
ITT
MJSB-51SH009
Board Connector, 51 Contact(s), 3 Row(s), Female, 0.05 inch Pitch, Wire Terminal, #1-64, Green Insulator, Receptacle,
ITT
MJSB-51SH011
Board Connector, 51 Contact(s), 3 Row(s), Female, 0.05 inch Pitch, Wire Terminal, #1-64, Green Insulator, Receptacle
ITT
MJSB-51SH013
Board Connector, 51 Contact(s), 3 Row(s), Female, 0.05 inch Pitch, Wire Terminal, #1-64, Green Insulator, Receptacle
ITT
MJSB-51SH017
Board Connector, 51 Contact(s), 3 Row(s), Female, 0.05 inch Pitch, Wire Terminal, #1-64, Green Insulator, Receptacle
ITT
©2020 ICPDF网 联系我们和版权申明