MS3470L18-32BZL [ITT]
暂无描述;MIL-C-26482, Series 2 Connectors
PV
• Intermatable with MIL-C-26482 Series I
• Operating termperature - 55˚C to + 200˚C
The PV connector is designed to meet the rugged
requirements of MIL-C-26482, Series 2/MIL-C-83723
Series I*, the specification which delineates
the critical requirements of space-age applications. PV
connectors have been used extensively on major
aerospace programs requiring general-purpose,
miniature cylindrical bayonet coupling connectors
such as Space Shuttle, Apollo, ATM, OWS Min-
uteman, Skylab, Thor-Delta, Titan IIIC, and Viking.
4
1
3
The PV series is an important member of the
Universal Interconnect System (UIS)
- the only
system that can perform all interconnection mis-
sions. This system is adaptable for use with connec-
tors of all shapes and sizes, including circular and
rectangular configurations. standard, miniature and
subminiature sizes. UIS is a rear servicing system
that evolved from the LITTLE CAESAR® rear re-
lease contact retention assembly, pioneered and
developed by ITT Cannon. Since this time,
ITT Cannon, and its licensees, have supplied to
industry over 250 million interconnections utilizing
this system.
2
Universal Insertion
/ Extraction Tool Style - A
single,expendable plastic tool is used for insertion and
extraction of both pins and sockets.
Simple, Strong Contact Design - One basic config-
uration eliminates undercuts and maximizes bend re-
sistance for positive contact mating.
Closed-Entry Socket Insert
face of mating connector has lead-in chamfers for
positive alignment of pins and sockets.
- Hard dielectric socket
PV7 connectors are available under numerous in-
dustrial specifications, some of which are listed
below:
• CS512089 Jet Propulsion Laboratory
• 40M39569 NASA, George C. Marshall Space
Flight Center
• 81D52 Martin Marietta, Denver Division
• MG414-0365 Rockwell International Space
Division
Interfacial Pin Insert Seal
- Universal interconnect
permits design of raised moisture barriers around each
pin which mate into lead-in chambers of hard face
sockets insert for individual contact sealing. Interfacial
sealing is never touched by service tools.
Superior Contact Stability
- Rear Contact Release
• AC414-0013 Rockwell International Autonetics
Division
• STS0003 McDonnell Douglas Astronautics
System (LITTLE CAESAR contact assembly) features a
stamped metal retaining clip captivated by molded-in
shoulders of each contact cavity in the insulator. A
rear-inserted plastic tool expands the tines beyond the
contact shoulder, releasing the contact.
This connector series is manufactured to accommo-
date the following backshells: M85049/31
(MS3416), M85049/51 (MS3418) and M85049/
52 (MS3417). Backshells are not included with
connector and must be ordered separately. Back-
shells on page 161 are Non-MS type.
Polarized Backshells - Interlocking teeth on the front of the
backshell and rear portion of the shell allow
endbells to be positioned as desired, eliminating chaf-
ing of wire during assembly.
Military Specification Cross Reference
ITT Cannon Prefix
PV7 and MIL-C-26482
(Series 2) Replacement for
MS Standards
MIL-C-83723*
Slash Sheet
Commercial
Design
Description
MIL-C-26482 (Series 1)
MIL-C-26482
PV70
PV71
PV70
PV74
PV76
PV72
PV75
Socket
Pin
MS3110,MS3120
MS3111,MS3121
MS3112,MS3122
MS3114,MS3124
MS3116,MS3126
MS3470
MS3471
MS3470
MS3474
MS3476
MS3472
MS3475
/1
/7
/1
/5
/13
/3
/43
/2
/8
/12
/6
/14
/4
Narrow Flange Receptacle
Cable Connecting Receptacle
Narrow Flange Receptacle
Jam Nut Receptacle
Straight Plug
Wide Flange Receptacle
Straight Plug, RFI Shielded
/42
NAS1599
NAS1650,NAS1699
NAS1651,NAS1700
NAS1652,NAS1701
NAS1653,NAS1702
MS3470
MS3472
MS3474
MS3476
/1
/3
/5
/13
/2
/4
/6
/14
Narrow Flange Receptacle
Wide Flange Receptacle
Jam Nut Receptacle
Straight Plug
*NOTE: M83723 series has been superseded by MIL-C-26482 Series 2.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
157
MIL-C-26482, Series 2 Connectors
PV
Performance and Material Specifications
MATERIALS AND FINISHES
Description
Material
Finish
Shell
Aluminum alloy per QQ-A-367, QQ-A-591 or QQ-A-225
Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab
cadmium over nickel
Insulators
Rigid dielectric
None
Silicone rubber (ITT Cannon blend) or Fluorosiclicone rubber (ITT
Cannon blen)
None
None
Elastomers (grommets, interfacial and O ring seals)
Contacts
Gold page per MIL-G-45204
Copper alloy
Coupling Nut
Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab
cadmium over nickel
Aluminum alloy per QQ-A-591
Aluminum alloy per QQ-A-225
Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab
cadmium over nickel
Jam Nut (on PV74)
ELECTRICAL
Contact
Size
Wire
Size
Insulation O.D. Limits, inch (mm)
Max Current
for Test (amps)
Potential Drop
(Millivolts at 25˚C)
min.
max.
12
14
16
20
20
24
23
50
45
50
45
55
45
12
16
20
.097 (2.46)
.158 (4.01)
17
13
.053 (1.53)
.040 (1.02)
.103 (2.62)
.083 (2.11)
7.5
7.5
3.0
Dielectric Withstanding Voltage (Test Volatge)
Service Rating
Sea Level
70,000 ft. Altitude
375 Vac rms
(25˚C)
I
1500 Vac rms
2300 Vac rms
5000 megohms minimum
5000 megohms minimum
II
500 Vac rms
How to Order
PV
MS
70
3470
L
L
18
18
-32
-32
P
P
W
W
L
SERIES PREFIX
SHELL STYLE
CLASS
SIZE
CONTACT ARRANGEMENT
CONTACT TYPE
ALTERNATE INSERT POSITIONS
LESS COMPONENTS
CONTACT TYPE
SERIES PREFIX
CLASS
MS - Complies with MIL-C-26482 Series 2
PV - ITT Cannon Interchangeable with
MIL-C-26482, Series 2
(PV Series and MS Series)
P - Pin contact
*A - Fluid resistant, 200˚C, non-conductive
(anodized)
S - Socket contact
A - Less pin contact* (MS only)
B - Less socket contacts* (MS only)
* The "A" and "B" designators are used only when other
than power contacts are ato be installed (i.e. shielded, coaxial
and thermocouple contacts).
L - Fluid resistant, 200˚C, conductive, finish
(nickely)
SHELL STYLE
ITT Cannon
W - Corrosive and fluid resistant, 175˚C
(cadmium over nickel)
Part No.
Military No.
Description
PV70
PV71
PV72
PV74
PV75
PV76
MS3470
MS3471
MS3472
MS3474
MS3475
MS3476
- Narrow Flange Receptacle
- Cable Connecting Receptacle
- Wide Flange Receptacle
- Jam Nut Receptacle
- Straight Plug, RFI Shielded
- Straight Plug
ALTERNATE INSERT POSITIONS
SHELL SIZE
No designation required for normal posistion.
Standard MS alternate positions available.
8, 10, 12, 14, 16, 18, 20, 22 and 24
(Size 8 avialable in PV70 & 76 only)
LESS COMPONENTS
CONTACT ARRANGEMENTS
Use "L" if PV connectors are ordered less
contacts, sealing plugs and insertion/extraction
tool ("L" is not stamped on connectors). To
order MS connectors less contacts, purchase
order must state less contacts.
See page 162.
*Consult factory for availablility.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
158
MIL-C-26482, Series 2 Connectors
PV
Narrow Flange Receptacle
MS3470
PV70
4 HOLES .125/.115 (3.18/2.92) DIA. SIZES 10-22
.152/.142/(3.86/3.61) DIA SIZE 24 ONLY
POLARIZING
B
U THD
GROOVE
F
DIA
L
(TYP)
J
G
K
(TYP)
.140 RAD.
MAX.
.130/.190
(3.30/4.83)
(TP)
U Thread
Shell
Size*
B
Max
F
Max
G
Max
J
Max
UNEF
Class 2A
K
L
8
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.587 (14.91)
.587 (14.91)
.620 (15.75)
.474 (12.04) 1.215 (30.85)
.594 (15.01) 1.215 (30.85)
.751 (19.08) 1.215 (30.85)
.876 (22.25) 1.215 (30.85)
1.001 (25.43) 1.215 (30.85)
1.126 (28.60) 1.215 (30.85)
1.251 (31.78) 1.275 (32.40)
1.376 (34.95) 1.275 (32.40)
1.501 (38.13) 1.275 (32.40)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.110 (2.79)
.110 (2.79)
.110 (2.79)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
1/2-20
5/8-24
10
12
14
16
18
20
22
24
3/4-20
7/8-20
1-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
Cable Connecting Receptacle
MS3471
PV71
B
POLARIZING
GROOVE
J
V THD
R DIA.
MAX.
A
DIA.
W
.130/.190
(3.30/4.83)
S MAX.
(TYP.)
U Thread
UNEF
Class 2A
Shell
Size*
A
Max
B
Max
J
Max
R Dia.
Max
S
Max
W
Max
10
12
14
16
18
20
22
24
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.587 (14.91)
.587 (14.91)
.620 (15.75)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.110 (2.79)
.110 (2.79)
.110 (2.79)
1.082 (27.48)
1.176 (29.87)
1.270 (32.26)
1.364 (34.64)
1.458 (37.03)
1.708 (43.38)
1.708 (43.38)
1.832 (46.53)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.578 (40.08)
1.578 (40.08)
1.703 (43.26)
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.275 (32.38)
1.275 (32.38)
1.275 (32.38)
5/8-24
3/4-20
7/8-20
1-20
1-1/16-18
1-5/16-18
1-5/16-18
1-7/16-18
Receptacle Assembly With Backshell†
TYPE C
ER REF.
EC REF.
ES REF.
TYPE S
TYPE R
Hr
Max.
Shell
Size*
Fs
Max.
Es
Max.
Gr
Max.
Er
Max.
Ec
Max.
10
12
14
16
18
20
22
24
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.552 (39.42)
1.552 (39.42)
1.552 (39.42)
.286 (7.26)
.416 (10.57)
.476 (12.09)
.626 (15.90)
.706 (17.93)
.831 (21.11)
.956 (24.28)
1.081 (27.46)
1.842 (46.79)
1.842 (46.79)
2.077 (52.76)
2.077 (52.76)
2.077 (52.76)
2.137 (54.28)
2.137 (54.28)
2.137 (54.28)
.880 (23.35)
.286 (7.26)
.416 (10.57)
.476 (12.09)
.626 (15.90)
.706 (17.93)
.831 (21.11)
.956 (24.28)
1.081 (27.46)
2.115 (53.72)
2.250 (57.15)
2.340 (59.44)
2.475 (62.87)
2.574 (65.38)
2.767 (70.28)
2.890 (73.41)
3.012 (76.50)
FS
GR
REF.
.950 (24.13)
1.010 (25.65)
1.070 (27.18)
1.130 (28.70)
1.190 (30.23)
1.260 (32.00)
1.320 (33.53)
TYPE R
HR
TYPE C
TYPE S
Backshell Assemblies not supplied with MS connectors.
Perfomance Specifications - Page 158
Contacts, Sealing Plugs, Assembly Tools - Pages
163, 165
*See page 158 for part numbers.† To order backshell assemblies separately, see page 161.
Contacts Arrangements - Page 162
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
159
MIL-C-26482, Series 2 Connectors
PV
Wide Flange Receptacle
MS3472
PV72
4 HOLES .150 +_ .005
(3.81 +_ 0.13mm)
DIA.
POLARIZING
GROOVE
B
P THD.
A
DIA.
Q
(TYP)
G
F
H (TP)
.130/.190
(3.30/4.83)
.140 RAD.
MAX.
P Thread
UNEF
Class A
Shell
Size*
A
Max.
B
Max.
F
Max.
G
Max.
H
Max.
Q
Max.
10
12
14
16
18
20
22
24
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.587 (14.91)
.587 (14.91)
.620 (15.75)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.275 (32.40)
1.275 (32.40)
1.275 (32.40)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.110 (1.98)
.110 (1.98)
.110 (1.98)
.812 (20.62)
.938 (23.83)
1.031 (26.19)
1.125 (28.58)
1.203 (30.56)
1.297 (32.94)
1.375 (34.93)
1.500 (38.10)
1.141 (28.98)
1.266 (32.16)
1.360 (34.54)
1.453 (36.91)
1.532 (38.91)
1.688 (42.88)
1.766 (44.86)
1.891 (48.03)
5/8-24
3/4-20
7/8-20
1-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
Jam Nut Receptacle
MS3474
PV74
GG
POLARIZING
GROOVE
L THD.
W
F
DIA.
V
B
G
H
A
.130/.190
(3.30/4.83)
GG
Panel
Thickness
W
Dia.
Max.
L Thread
UNEF
Class 2
Shell
Size*
V
Max.
A
Max.
B
Max.
F
Max.
G
Max.
H
Max.
8
10
12
14
16
18
20
22
24
.954 (24.23)
1.078 (27.38)
1.266 (32.16)
1.391 (35.33)
1.516 (38.51)
1.641 (41.68)
1.828 (46.43)
1.954 (49.63)
2.078 (52.78)
.767 (19.48)
.892 (22.66)
1.079 (27.41)
1.205 (30.61)
1.329 (33.76)
1.455 (36.96)
1.579 (40.11)
1.705 (40.11)
1.829 (46.46)
.113 (2.87)
.113 (2.87)
.113 (2.87)
.113 (2.87)
.113 (2.87)
.113 (2.87)
.148 (3.76)
.148 (3.76)
.148 (3.76)
.474 (12.04)
.707 (17.96)
.707 (17.96)
.707 (17.96)
.707 (17.96)
.707 (17.96)
.707 (17.96)
.772 (19.61)
.772 (19.61)
.772 (19.61)
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.250/.062 (6.35/1.57)
.250/.062 (6.35/1.57)
.219/.062 (5.56/1.57)
1.215 (30.86)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.275 (32.40)
1.275 (32.40)
1.275 (32.40)
1.078 (27.38)
1.203 (30.56)
1.391 (35.33)
1.516 (38.51)
1.641 (41.68)
1.766 (44.86)
1.954 (49.63)
2.078 (52.78)
2.203 (55.96)
1/2-20
5/8-24
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
3/4-20
7/8-20
1-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
Receptacle Assembly With Backshell†
TYPE C
BBR REF.
BBS REF.
TYPE S
Fs
TYPE R
GR
Max.
BBC REF.
BBc
Shell
Size*
BBs
BBR
Max.
HR
Max.
Max.
Max.
Max.
FS
10
12
14
16
18
20
22
24
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.552 (39.42)
1.552 (39.42)
1.552 (39.42)
1.842 (46.79)
1.842 (46.79)
2.077 (52.76)
2.077 (52.76)
2.077 (52.76)
2.137 (54.28)
2.137 (54.28)
2.137 (54.28)
.286 (7.26)
.416 (10.57)
.476 (12.09)
.626 (15.90)
.706 (17.93)
.831 (21.11)
.956 (24.28)
1.081 (27.46)
2.115 (53.72)
2.250 (57.15)
2.340 (59.44)
2.475 (62.87)
2.574 (65.38)
2.767 (70.28)
2.890 (73.41)
3.012 (76.50)
.880 (22.35)
.950 (24.13)
1.010 (25.65)
1.070 (27.18)
1.130 (28.70)
1.190 (30.23)
1.260 (32.00)
1.320 (33.53)
.286 (7.26)
.416 (10.57)
.476 (12.09)
.626 (15.90)
.706 (17.93)
.831 (21.11)
.956 (24.28)
1.081 (27.46)
GR
REF.
TYPE R
TYPE C TYPE S
HR
Backshell Assemblies not supplied with MS connectors.
Performance Specifications - Page 158
Contacts, Sealing Pluts, Assembly Tools - Pages
163, 165
* See page 158 for part numbers. † To order backshell assemblies separately, see page 161.
Contact Arrangments - Page 162
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
160
MIL-C-26482, Series 2 Connectors
PV
Straight Plug
PV76
MS3476
POLARIZING
BOSS
E THD.
A
DIA.
U DIA.
W
.130/.190
(3.30/4.83)
Shell
Size*
A Dia.
Max.
U
Max.
W
Max.
E Thread
UNEF Class 2A
8
10
12
14
16
18
20
22
24
.765 (19.43)
.840 (21.34)
.999 (25.37)
1.139 (28.93)
1.261 (32.03)
1.337 (33.96)
1.477 (37.52)
1.602 (40.69)
1.723 (43.76)
.782 (19.86)
.926 (23.52)
1.043 (26.49)
1.183 (30.05)
1.305 (33.15)
1.391 (35.33)
1.531 (38.89)
1.656 (42.06)
1.777 (45.14)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1/2-20
5/8-24
3/4-20
7/8-20
1-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
MS34745
PV75
Shell
Size*
E Thread
UNEF Class 2A
A Dia.
Max.
U
Max.
W
Max.
Straight Plug, RFI Shielded
10
12
14
16
18
20
22
24
5/8-24
3/4-20
.840 (21.34)
.999 (25.37)
1.139 (28.93)
1.261 (32.03)
1.337 (33.96)
1.477 (37.52)
1.602 (40.69)
1.723 (43.76)
.926 (21.72)
1.043 (26.42)
1.183 (29.97)
1.305 (33.15)
1.391 (35.33)
1.531 (38.89)
1.656 (42.06)
1.777 (45.14)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
7/8-20
1-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
* See page 158 for part numbers.
TYPE C
VC
Max.
TYPE S
TYPE R
HR
Max.
Plug Assemblies with Backshell †
FS
Max.
VS
Max.
GR
Max.
VR
Max.
Shell
Size*
VS REF.
VC REF.
VR REF.
8
10
12
14
16
18
20
22
24
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
.286 (7.26)
.416 (10.57)
.476 (12.09)
.626 (15.90)
.706 (17.93)
.831 (21.11)
.956 (24.28)
1.081 (27.46)
1.857 (47.17)
1.857 (47.17)
2.092 (53.14)
2.092 (53.14)
2.092 (53.14)
2.092 (53.14)
2.092 (53.14)
2.092 (52.14)
.880 (22.35)
.950 (24.13)
1.010 (25.65)
1.070 (27.18)
1.130 (28.70)
1.190 (30.23)
1.260 (32.00)
1.320 (33.53)
.286 (7.26)
.416 (10.57)
.476 (12.09)
.626 (15.90)
.706 (17.93)
.831 (21.11)
.956 (24.28)
1.081 (27.46)
2.130 (54.10)
2.265 (57.53)
2.355 (59.82)
2.490 (63.25)
2.589 (65.76)
2.722 (69.14)
2.845 (72.26)
2.967 (75.36)
FS
GR
REF.
TYPE C
TYPE S
HR
TYPE R
Backshell Assemblies not supplied with MS connectors.
Performance Specifications - Page 158
Contacts, Sealing Pluts, Assembly Tools - Pages
163, 165
* See page 158 for part numbers. † To order backshell assemblies separatedly, see page 161.
Contact Arrangments - Page 162
Backshells (Non-MS)
(Not supplied with MS Connectors)
TYPE C (SHORT)
TYPE S (Straight)
ITT CANNON
Conductive
(Nickel finish)
TYPE R (90˚)
ITT CANNON
Conductive
(Nickel finish)
ITT CANNON
Conductive
(Nickel finish)
Shell
Size*
10
12
14
16
18
20
22
24
057-0716-002
057-0717-002
057-0718-002
057-0719-002
057-0720-002
057-0721-002
057-0722-002
057-0723-002
057-0683-002
057-0684-002
057-0685-002
057-0686-002
057-0687-002
057-0688-002
057-0689-002
057-0731-002
057-0704-001
057-0705-001
057-0706-001
057-0707-001
057-0708-001
057-0709-001
057-0710-001
057-0711-001
Short
(C)
Straight
(S)
90˚ Degree
(R)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
161
MIL-C-26482, Series 2 Connectors
PV
Contact Arrangements
Face view, pin insert
A
C
A
G
A
H
F
A
E
B
B
D
A
C
D
B
H
D
B
F
G
C
A
K
J
D
C
F
B
B
C
C
A
E
E
C
A
E
B
B
D
C
Shell Size
No. of Contacts
Service Rating
8-33*
3-#20
I
8-98*
3-#20
I
10-6
6-#20
I
12-3
3-#16
II
12-8
8-#20
I
12-10
10-#20
I
14-4
4-#12
I
14-5
5-#16
II
A
H
A
R
G
B
B
A
P
Z
P
T
S
N
A
C
M
A
A
H
R
A
L
T
N
A
P
U
L
B
E
G
B
M
S
M
L
B
B
M
S
B
a
b
N
F
C
N
T
Y
D
E
P
G
J
B
K
K
K
Z
C
D
C
D
L
M
T
V
R
G
K
J
H
V
N
U
C
F
c
C
D
U
C
R
P
M
E
D
X
W
J
K
Y
J
R
L
D
U
E
D
S
W
H
V
F
L
C
X
F
H
E
H
J
K
H
E
E
F
G
F
E
D
J
G
F
F
G
G
H
Shell Size
No. of Contacts
Service Rating
14-12
4-#16, 8-#20
I
14-15
1-#16, 14-#20
I
14-18
18-#20
I
14-19
19-#20
I
16-8
8-#16
II
16-23
1-#16, 22-#20
I
16-26
26-#20
I
18-8
8-#12
I
A
N
A
X
M
A
B
P
X
W
W
B
A
L
B
V
W
R
X
V
C
T
A
J
k
A
B
C
L
K
C
M
U
Y
Y
k
S
B
U
f
U
D
j
l
l
Z
V
N
T
Z
H
S
R
D
j
B
e
m
t
S
R
C
T
S
h
g
V
a
b
t
m
K
E
F
K
W
D
d
a
J
C
S
R
E
F
j
g
D
h
P
n
G
s
P
b
T
u
U
C
s
E
L
J
p
c
X
E
F
g
N
h
R
f
c
c
r
H
D
G
f
P
F
D
b
Y
G
p
G
e
d
d
M
Z
P
e
H
a
E
N
H
F
G
H
J
J
E
N
L
H
G
K
F
M
K
M
L
J
K
L
Shell Size
No. of Contacts
Service Rating
18-11
11-#16
II
18-32
32-#20
I
20-16
16-#16
II
20-39
2-#16, 37-#20
I
20-41
41-#20
I
22-21
21-#16
II
A
A
P
Z
M
Z
f
b
a
A
Y
B
M
A
B
Y
B
L
N
U
A
X
c
B
C
u
X
s
v
Z
T
l
V
B
d
C
W
t
W
a
S
C
Y
l
L
C
W
N
P
w
D
GG
a
Q
V
X
Y
HH
e
m
D
m
k
C
k
x
AA
b
FF
E
b
K
JJ
NN
R
V
U
t
z
x
BB
D
f
p
r
V
R
E
F
K
g
U
D
R
X
r
CC
Z
PP
LL
F
y
j
GG
FF
EE
j
KK
AA
u
r
MM
c
U
e
HH
D
T
P
E
J
c
g
DD
a
b
p
e
s
S
q
z
DD
T
S
d
W
J
E
G
N
w
EE
u
s
F
T
S
G
d
T
h
CC
m
h
h
V
v
BB
t
p
H
E
g
U
S
g
c
H
R
H
F
H
G
i
M
f
d
f
G
F
J
G
R
P
J
j
k
K
N
K
L
P
H
M
L
e
L
K
J
M
N
22-41
22-55
24-19
24-31
24-61
Shell Size
24-#20, 14-#16
I
55-#20
I
19-#12
II
31-#16
I
61-#20
I
No. of Contacts
Service Rating
* Layouts are available in shell styles MS3470 and MS3476 only.
Alternate Insert Positions
Face view, pin insert
SHELL
SIZE
ARRANGE-
MENT
POS CODE
X
N
W
Y
Z
-
-
-
-
33
98
6
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
0˚
90˚
-
N
8
-
-
-
-
-
W˚
-
90˚
-
10
-
180˚
203˚
270˚
-
3
X˚
112˚
155˚
-
292˚
295˚
-
8
90˚
60˚
45˚
40˚
43˚
17˚
15˚
30˚
54˚
Z˚
12
14
10
4
Y˚
92˚
90˚
110˚
90˚
165˚
152˚
270˚
-
184˚
-
273˚
-
5
12
15
18
19
8
Contact arrangements requiring reduced diameter
for lead-in chamfer on outer row of contact cavities
as indicated below.
155˚
180˚
315˚
180˚
-
234˚
270˚
-
331˚
-
Contact
Arrangements
23
26
8
158˚
60˚
180˚
62˚
85˚
238˚
63˚
45˚
16˚
39˚
30˚
30˚
90˚
90˚
16
18
Shell
8
Contact Cavities
275˚
-
338˚
-
33, 38
10
A, B, C
C, G
-
12
14
14
14
16
119˚
138˚
318˚
144˚
126˚
135˚
135˚
142˚
165˚
225˚
180˚
241˚
222˚
333˚
252˚
225˚
175˚
264˚
226˚
315˚
225˚
270˚
340˚
265˚
347˚
333˚
-
11
32
16
39
41
21
41
55
19
31
61
12
A, B, C, D, E, F, G, and H
A, C, E, G, J, and L
18
20
22
24
19
B, D, F, H, K, and M
26
A, B, C, D, E, F, G, H, J, K, L, M, N,
P, and R)
349˚
-
18
22
32
41
A, B, C, D, E, F,G, H, J, K, L, M, N,
P, R, S, and T
314˚
-
-
A, B, C, D, E, F, G, H, J, K, L, M, N,
P, R, S, T, U, V, W, X, and Y
324˚
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
162
MIL-C-26482, Series 2 Connectors
PV
Thru-Bulkhead Receptacle
PV-TBF
4 HOLES
.125/.115 (3.18/2.92) DIA.
SIZES 8-22
.152/.142 (3.86/3.61) DIA.
SIZES 24 ONLY
X
X
POLARIZING
GROOVE
K
R
(TP)
A
DIA.
A
DIA.
PANEL
PANEL
M
.140 RAD.
MAX.
FRONT
PANEL MOUNTING
REAR
PANEL MOUNTING
S
(TYP)
L
Shell
Size
A
K
L
Max.
M
R
(TP)
S
Max.
X
Max.
Dia +_.003 (0.08)
+_.016 (0.41)
+_.016 (0.41)
.577 (14.66)
.577 (14.66)
.577 (14.66)
.577 (14.66)
.577 (14.66)
.577 (14.66)
.703 (17.86)
.703 (17.86)
.703 (17.86)
8
10
12
14
16
18
20
22
24
.471 (11.96)
.588 (14.94)
.748 (19.00)
.873 (22.17)
.998 (25.35)
1.123 (28.52)
1.248 (31.70)
1.373 (34.87)
1.498 (38.05)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.094 (2.39)
.094 (2.39)
.094 (2.39)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.406 (35.71)
1.406 (35.71)
1.406 (35.71)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.344 (8.74)
.344 (8.74)
.311 (7.90)
Notes: 1) Shell available in conductive (nickel finish) only.
2) Contacts are nonremovable.
How to Order - PV-TBF
PV-TBF 10 -6 PS
W
SERIES PREFIX
SHELL SIZE
INSERT ARRANGEMENTS
CONTACT STYLE
SERIES PREFIX
ALTERNATE POLARIZING POSITION
PV-TBF - ITT Cannon prefix
CONTACT STYLE
Notes: 1) Shell available in conductive (nickel fin-
ish) only.
SHELL SIZE
Pin and socket
8 through 24
2) Contacts are nonremovable.
3) Designed to MS3119 configuration and
meets the performance requirements of
MIL-C-26482 Series 2.
ALTERNATE POLARIZING POSITION
INSERT ARRANGEMENTS
No designation required for normal. Standard MS
alternate posistions available.
10-6, 14-19, 16-8, 16-26, 18-32, 20-39, 20-
41, 22-41, 22-55, 24-61.
Tooling
Crimp Tool
M22520/1-01 Crimp Tool
Insertion/Extraction Tools
with M22520/1-02 Turret
CBT 520/530
Wire Contact Tools
Unwired Contact
Contact
Size
Cannon
Part Number
M81969
Part Number
Insertion
Color Tip
Extraction
Color Tip
Superseded
Mil. Pt. No.
Tools
Cannon Pt. No.
CIET-20-11
(274-7001-006)
20
16
12
M81969/14-11
M81969/14-03
M81969/14-04
Red
Blue
White
White
White
MS27534-20, MS3447-20, NAS1664-20
MS27534-16, MS3447-16, NAS1664-16
MS27534-12, MS3447-12, NAS1664-12
274-7007-000
274-7008-000
274-7009-00
CIET-16-03
(274-7002-000)
CIET-12-04
(274-7003-000)
Yellow
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
163
MIL-C-26482, Series 2 Connectors
PV
Panel Cutouts
Jam Nut Receptacle
Narrow Flange and Thru-Bulkhead/Wide Flange
F DIA.
+.010 (0.25)
-.000 (0.00)
DIA.
+_.005 (+_.13)
A
R
(TYP.)
E
T DIA. 4 MTG. HOLES
Shell
E
F Dia.
+_.005 (0.13)
Flange Front
and Rear
Mounting
Flange Front
and Rear
Mounting
Size
10
12
14
16
18
20
22
24
+_.005 (0.13)
.661 (16.79)
.824 (20.93)
.948 (24.08)
1.072 (27.23)
1.197 (30.40)
1.322 (33.58)
1.447 (36.75)
1.572 (39.93)
Mounting
Hole
Mounting
Hole
.697 (17.70)
.895 (22.73)
1.010 (25.65)
1.135 (28.33)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
Shell
Size
A
T
Dia.
Screw
Size
Shell
Size
A
T
Dia.
Screw
Size
Dia.
R
Dia.
R
.620 (15.75)
.594 (18.26) .125 (3.14)
.719 (18.26) .125 (3.17)
.812 (20.62) .125 (3.17)
.906 (23.01) .125 (3.17)
.969 (24.61) .125 (3.17)
#4
8
10
12
14
16
18
20
22
24
10
12
14
16
18
20
22
24
.740 (18.80)
.864 (21.95)
.990 (25.15)
1.118 (28.40)
1.240 (31.50)
1.366 (34.70)
1.490 (37.85)
1.616 (41.05)
.812 (20.62) .155 (3.97)
.938 (23.93) .155 (3.97)
1.031 (26.19) .155 (3.97)
1.125 (28.58) .155 (3.97)
1.203 (30.56) .155 (3.97)
1.297 (32.94) .155 (3.97)
1.375(34.92) .155 (3.97)
1.500 (38.10) .155 (3.97)
#6
#6
#6
#6
#6
#6
#6
#6
.740 (18.80)
.864 (21.95)
.990 (25.15)
1.118 (28.40)
#4
#4
#4
#4
#4
#4
#4
#6
1.240 (31.50) 1.062 (26.97) .125 (3.17)
1.366 (34.70) 1.156 (29.36) .125 (3.17)
1.490 (37.85) 1.250 (31.75) .125 (3.17)
1.616 (41.05) 1.375 (34.92) .155 (3.97)
Panel Thickness
Shown here are the maximum panel thickness
including screw head height allowable to ensure
complete connector operation.
Narrow Flange Receptacle
Wide Flange Receptacle
.125 (3.18) Max. (backshell
clearance for front mount)
.125 (3.18) Max. (backshell
clearance for front mount)
.118 (3.00mm) maximum for
.087 (2.21mm) maximum for
shell size 10 thru 18 (rear mount)
.212 (5.38mm maximum for
shell size 10 thru 18 (rear mount)
.212 (5.38mm maximum for
shell size 20 thru 24 (rear mount)
shell size 20 thru 24 (rear mount)
BACKSHELL
BACKSHELL
COUPLING NUT
COUPLING NUT
Dummy Stowage Receptacles
How to Order
PV DESCRIPTION
PVS -15
MS DESCRIPTION
SERIES PREFIX
G DIA.
G
12
MS 3115 -12
L
4 HOLES
SERIES PREFIX
PVS - ITT Cannon prefix
DUMMY RECEPTACLE INDICATOR
- 15 -PV
MS - Complies with MIL-C-26482
A
DIA
MS STANDARD
3115 - Dummy receptacle
SHELL SIZE
CLASS
G - Conductive finish (nickel)
8 through 24
J
K
E
(TP)
CLASS
A - Nonconductive finish (anodized)
F
SHELL SIZE
L - Conductive finish (nickel)
A - Nonconductive finish (anodized)
(TYP)
8 though 24
NOTE: Usable on KPT/KPSE series also.
Shell
Size
A
E
(TYP)
F
Max.
G
Max.
J
Max.
K
Max.
Dia. Max.
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.16)
.125 (3.18)
.152 (3.86)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.587 (14.91)
.587 (14.91)
.620 (15.75)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.110 (2.79)
.110 (2.79)
.110 (2.79)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
164
MIL-C-26482, Series 2 Connectors
PV
Protective Metal Caps
Plugs
.047
1,19mm)
Max.
PVS
MS
80
-12
C
A
A
L
3180 -12
C
.169 +_ .008 DIA.
(4.29 +_ 0.20)
SERIES PREFIX
A
F
PVS - ITT Cannon Prefix
MS - Complies with MIL-C-26482 (Series 2)
TYPE
H +.500 (12.7)
-.250 (6.35)
CHAIN LENGTH
M
80 or 3180 - Plug Cap
81 or 3181 - Receptacle Cap
Receptacles
SHELL SIZE
8 thru 24
N
TERMINATION STYLE
R
.094
2,39mm)
Max.
C - Sash chain (MS approved)
N - Sash chain with ring (81 or3181 type only) MS approved
FINISH
Q
B
A - Hard anodic, non-conductive (MS approved)
G - Nickel, conductive (not MS) (PVS only)
H +.500 (12.7)
-.250 (6.35)
CHAIN LENGTH
NOTE: Usable on KPT/KPSE series also.
N style used primarily on Jam Nut Receptacle.
Shell
Size
A
B
Max.
F
L
Max.
M
Max.
N
Q
Max.
R
Max.
Max. Dia.
Max. Dia.
H
Min. Dia.
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.96)
1.501 (38.13)
.486 (12.34)
.719 (18.26)
.844 (21.44)
1.000 (25.40)
1.125 (28.58)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
1.625 (41.26)
1.750 (44.45)
3.000 (76.20)
3.000 (76.20)
3.500 (76.20)
3.500 (88.90)
3.500 (88.90)
3.500 (88.90)
4.000 (101.60)
4.000 (101.60)
4.000 (101.60)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.625 (15.88)
.625 (15.88)
.658 (16.71)
.399 (10.13)
.399 (10.13)
.399 (10.13)
.399 (10.13)
.399 (10.13)
.399 (10.13)
.461 (11.71)
.461(11.71)
.494 (12.55)
.578 (14.68)
.703 (17.86)
.891 (22.63
.734 (18.64)
.859 (21.82)
1.000 (25.40)
1.125 (28.58)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
1.625 (41.26)
1.750 (44.45)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.602 (15.29)
.607 (15.42)
.766 (19.46)
.890 (22.60)
1.015 (25.78)
1.141 (28.98)
1.265 (32.13)
1.390 (35.31)
1.515 (38.48)
1.016 (25.81)
1.141 (28.98)
1.266 (32.16)
1.391 (35.33)
1.516 (38.51)
1.641 (41.68)
Contacts
Thermocouple Contacts
Contact
Color Brands
2nd
Contact
Size
M39029
Number
Alumel
Chromal
Size
Type
Socket
Pin
1st
3rd
ITT Cannon
20 Pin
030-1831-000
031-1013-000
030-1832-000
031-1014-000
20
20
16
16
12
12
M39029/5-115
M39029/4-110
M39029/5-116
M39029/4-111
M39029/5-118
M39029/4-113
Brown
Brown
Brown
Brown
Brown
Brown
Brown
Brown
Brown
Brown
Brown
Brown
Green
Black
Blue
031-9174-004
030-9173-006
031-9206-006
030-9205-007
031-9186-003
030-9185-003
20 Socket
Socket
Pin
Contacts for printed circuit applications are also
available. Consult factory.
Brown
Grey
Socket
Pin
Orange
Wire Hole Fillers
Part Number
Superseded
Mil. Pt. No.
Color
Code
Contact
Size
Cannon
Military
MS3187-20
M83723/28-20
MS3187-16
20
16
12
225-0070-000
225-0071-000
225-0072-000
MS27488-20
Red
Blue
MS27488-16
MS27488-12
M83723/28-16
MS3187-12
Yellow
M83723/28-12
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
165
MIL-C-26482, Series 2 Connectors
PV
Assembly Procedures
STRIPPING AND CRIMPING
Right
3/16" for
#20 CONTACT
9/32" for
#16 CONTACT
9/32" for
#12 CONTACT
Wrong
1. Strip wires according to contact size: 3/16" for #20 and 9/32"for 2. Insert wire into rear of contact. Wire insulation must butt against 3. Use M22520/1-01 crimp tool with proper crimp locator M22520/
#16 and#12. #20 contacts accommodate AWG wire sizes 20, 22, or rear of contact. Wire must be visible thru inspection hole.
24; #16 accommodates 16, 18 or 20; and #12 accommodates 12 or 14.
1-02. The color code hand on the contact (red for #20, blue for #16
and yellow for #12) must match the color code of the locator and the
insertion tool throughout the crimping and assembly operations.
CONTACT INSERTION
OPENING
COLORED END
FOR INSERTION
4. Insert contact and wire into tool jaws. To crimp, squeeze handles 1. Remove backshell and put wired contacts thru cable clamp opening. 2. Used colored end of CIET tool for insertion. Place wire into tool at
together fully until ratchet release and allows handles to expand;
otherwise, contact cannot be extracted from tool jaws. Maintain slight
insertion pressure on wire while crimping contact to wire.
large opening. To facilitate contact insertion, a 6-in. min. free lenght of
wire is recommended.
3. Slide back tool on wire shile holding thumb against wire at opening.
Wire will slip into tool.
4. With tool pressed against shoulder of contact, starting at the center 5. When contact bottoms, a slight click can be heard as tines of metal
cavity, insert wired contact and tool into properly identified cavity at reataining clip snaps into place behind contact shoulder.
rear of plug with firm, even pressure. Do not use excessive pressure.
NOTE: Socket contacts should be inserted partially into grommet
by hand before using insertion tool.
CONTACT EXTRACTION
6. Withdraw tool from rear of plug. To be sure that contact is locked,
pull back lightly on wire. Then remove tool from wire and proceed with
other contacts.
7. After all contacts are inserted, fill unwired cavities with sealing 1. Remove backshell and slide back along wires to allow access. To
plugs (insert head last and leave end protruding for ease of removal), extract a contact, use white end of CIET tool. Place wire into tool at
assemble backshell on rear of connector.
large opening. Slide back tool on wire while holding thumb against wire
at opening. Wire will slip into tool.
COMPLETION
BROKEN CIRCLE
BREAK
2. Push tool into rear of plug until it bottoms. At this point, tool
releases tines on retaining clip so that contact can be extracted.
3. While maintaining slight insertion force on tool, firmly hold wire 4. Check face of plug or receptacle for proper contact installation. In
against serrated shoulder at center of tool and extract both wired socket inserts with a large number of contact, cavities are identified in
contact and tool from plug.
a spiral pattern. A projecting line from the spiral indictates omission of a
letter; a broken circle around a cavity indicates transition between
capitals and lower case and double letters.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
166
相关型号:
MS3470L18-8A
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle
AMPHENOL
MS3470L18-8AL
MIL Series Connector, 8 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle,
ITT
©2020 ICPDF网 联系我们和版权申明