NLS-N-BL-S120-M50 [ITT]
CONN LINE SOURCE 1POS SET SCREW;
| 型号： | NLS-N-BL-S120-M50 |
| 厂家： | 
ITT Cannon |
| 描述： | CONN LINE SOURCE 1POS SET SCREW |
| 文件： | 总2页 (文件大小：271K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PowerLock Line Source
Line Source is the connector with a male contact which is normally connected to the source of the power. The con-
tacts are fitted with a plastic end cap that prevents accidental finger touching of live parts of the connector and
meets IP2X requirements. Different contacts are available to suit cable conductors from 25 mm2 to 300 mm2.
Connectors rated either 400 amp or 660 amp, can be fitted to a wide range of cop-
per cables, and to aluminium cables on request.
The 400 amp connectors use a standard set-screw contact suitable for 120mm2
conductors; when using smaller conductors a range of reduction sleeves are
available to order separately that can be used with cables down to 25mm2, see page
M-2 for further information.
660 amp contacts are crimped using industry standard crimping tools and dies, a
range of contacts are available to suit cables from 35mm2 to 300mm2
Cable glands meeting IP67 requirements are fitted to the connectors, 4 sizes are available that cover a range of
cables with outside diameters from 15mm to 38mm. When selecting the M50 gland, please note that this is
supplied with an adaptor (not shown above) that steps the connector up from M40 to M50.
Rubber hand grips are available that fit over the ribbed
section of the main insulator body, these grips assist
with the handling of the connectors when being used
in difficult conditions.
A Sliding Collar can be factory fitted to the source
connector which allows a pair of connectors to be
disconnected without the use of a separate release key.
M
Order suffix = HG
Order suffix = SC
Ordering information – see page M-2 for full details of the options available
Example part number:
NLS-1-BN-S120-M40A
NLS – X – XX – XXXX – MXXX – XX
Cable Gland Special Options
HG Hand Grip
Contact
Line & Color
SC
Sliding Collar
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
M-5
相关型号：
©2020 ICPDF网 联系我们和版权申明