T103P3TV3GE [ITT]
Toggle Switch, SPDT, Latched, 2A, 28VDC, Solder Terminal, High Flatted, Anti-rotation Actuator, Through Hole-straight, ROHS COMPLIANT;型号: | T103P3TV3GE |
厂家: | ITT Cannon |
描述: | Toggle Switch, SPDT, Latched, 2A, 28VDC, Solder Terminal, High Flatted, Anti-rotation Actuator, Through Hole-straight, ROHS COMPLIANT 光电二极管 |
文件: | 总6页 (文件大小:331K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T Series
Subminiature Toggle Switches
Features/Benefits
Typical Applications
• Compact size—small footprint
• Single and double pole models
• Hand-held telecommunications
• Instrumentation
• PC and panel mount
• Medical equipment
options available
• RoHS compliant models available
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (TX01 models): 3 AMPS @
120 V AC or 28 V DC. All other models: 2 AMPS @
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
diallyl phthalate (DAP), (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
120 V AC or 28 V DC. See page G-42 for additional ratings.
ELECTRICAL LIFE: TX01 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
SWITCH SUPPORT: Brass, matte-tin plated.
CONTACT RESISTANCE: Below 20 m Ω typ. initial @
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See above for additional contact materials.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page G-42 for additional contact materials.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated. Additional hardware available
separately, see Section O.
NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant
and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G-38 thru G-42. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
T101 SPDT On-None-On
T102 SPDT Off-None-On
T103 SPDT On-Off-On
Actuator
P3 Flatted,
Bushing
T105 SPDT Mom.-Off-Mom.
T107 SPDT On-Off-Mom.
T108 SPDT On-None-Mom.
T201 DPDT On-None-On
T205 DPDT Mom.-Off-Mom.
T203 DPDT On-Off-On
T207 DPDT On-Off-Mom.
T208 DPDT On-None-Mom.
T211 DPDT On-On-On.
anti-rotation,
.490" high
.370" high
Locking lever, round tip
H
.220" high, threaded, flat
Terminations
Seal
Epoxy
H9 .220" high, unthreaded, flat
CF Splashproof, .310" high, threaded, flat
D9 .260" high, unthreaded, keyway
S
K
A
Right angle, PC thru-hole
E
AV Vertical right angle,
L1 .620" high
M1 .220" high
S1 .410" high
PC thru-hole
T
.310" high, threaded, flat
C
PC Thru-hole
T9 .310" high, unthreaded, flat
TD .260" high, threaded, keyway
TK .310" high, threaded, keyway
V3 Vertical mount V-bracket
M
L
.210" high
.290" high
Z
W
Solder lug
Wire wrap
Y
.220" high, threaded, keyway
Contact Material
Y9 .220" high, unthreaded, keyway
B
P
Q
G
R
Gold
Gold, matte tin
Silver
G
Gold over silver
Gold over silver, matte-tin
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
G–37
T Series
Subminiature Toggle Switches
SWITCH FUNCTION
SWITCH FUNCTION
CONNECTED TERMINALS
POS. 2
POS. 1
POS. 2
POS. 3
POS. 1
POS. 3
NO.
POLES
MODEL
NO.
C&K marking on opposite side
C&K marking on opposite side
SCHEMATIC
T101
ON
ON
NONE
OFF
ON
2-3
N/A
2-1
2-1
T103
T105
T107
T108
T102
ON
MOM.
ON
OFF
MOM.
MOM.
MOM.
2-3
OPEN
SP
OFF
SPDT
SPST
ON
NONE
2-3
NA
2-1
3-1
OFF
NONE
ON
OPEN
N/A
SPDT
Part number shown: T101SHZQE
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
CONNECTED TERMINALS
POS. 2
POS. 1
POS. 3
NO.
POLES
MODEL
NO.
C&K marking on opposite side
C&K marking on opposite side
SCHEMATIC
T201
ON
ON
NONE
OFF
ON
ON
2-3,5-6
N/A
2-1,5-4
2-1,5-4
T203
T205
T208
T211*
2-3,5-6
OPEN
DP
MOM.
ON
OFF
MOM.
MOM.
ON.
NONE
ON
2-3,5-6
2-3,5-6
N/A
2-1,5-4
2-1,5-4
2-3,5-4
ON
DPDT
DPDT
Terminal Nos.
For Reference Only
Part number shown: T201SHZQE
MOM. = Momentary
G
All models
with all options when ordered with G, L, R or Q contact material.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
G–38
T Series
Subminiature Toggle Switches
ACTUATOR
M
.210" HIGH
S
.370" HIGH
M1
.220" HIGH
(with “T” bushing)
S1 .410" HIGH
(with “T” bushing)
2
1
1
2
Standard with A, AV or V3 terminations.
Standard with Z, C or W terminations.
L
.290" HIGH
L1
.620" HIGH
P3
ANTI-ROTATION, FLATTED,
.450" HIGH
1
2
Actuator shown with standard H bushing.
Subtract .040 (1,02) for TD and D9 bushings,
subtract .090 (2,29) for T, T9, TK, K9 &
CF bushings.
1
2
Actuators shown with T, T9, TK & CF bushings,
add .050 (1,27) for TD and D9 bushings,
add .090 (2,29) for H, H9, Y & Y9 bushings.
All actuators have chrome finish (except K).
Available with T & T9 bushings only.
Dress nut part number 709901201
supplied standard with threaded bushing.
K
LOCKING LEVER
Locking Positions
–01 & –02 Models
2 Position lock
–03 & –11 Models
3 Position lock
–08 Models
1 Position lock
K actuators have natural aluminum finish.
Keyway on right side. To prevent accidental actuation, toggles
must be lifted before being actuated. When released, toggles
again lock in place. Overtightening mounting nut may cause
actuator to bind.
Not available with CF bushing option.
Bushing option code not required. Not available with TX05 & TX07 models.
BUSHING
H
.220" HIGH THREADED, FLAT
Y
.220" HIGH THREADED, KEYWAY
T
.310" HIGH THREADED, FLAT
H9
.220" HIGH UNTHREADED, FLAT
Y9
.220" HIGH UNTHREADED, KEYWAY
T9
.310" HIGH UNTHREADED, FLAT
G
H standard with C, W & Z terminations.
H9 standard with A, AV & V3 terminations.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
G–39
T Series
Subminiature Toggle Switches
BUSHING
TK .310" HIGH THREADED, KEYWAY
TD .260" HIGH THREADED, KEYWAY
CF SPLASHPROOF, .310" HIGH THREADED, FLAT
D9
.260" HIGH UNTHREADED, KEYWAY
IP67 Degree of protection.
Internal o-ring actuator seal and
external bushing seal washer standard.
Not available with K locking lever option.
10-48 BUSHING
PANEL MOUNTING
1/4 IN. BUSHING
With Standard Locking Ring
Without Locking Ring
Without Locking Ring
Without Locking Ring
Without Locking Ring
With Small Locking Ring
With Standard Locking Ring
TERMINATIONS
Z
SOLDER LUG
C
PC THRU-HOLE
SP
DP
SP
DP
PC MOUNTING
T102 – omit center hole.
Not available with P or R contact materials.
W
WIRE WRAP
SP
DP
G
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
G–40
T Series
Subminiature Toggle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
T101MH9ABE
Horizontal Actuation
SPDT
Actuator Shown In Pos. 1
Not available with T102 model.
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
T201MH9ABE
Horizontal Actuation
DPDT
Actuator Shown In Pos. 1
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
T101MH9AVBE
Vertical Actuation
SPDT
Actuator Shown In Pos. 1
T102 Models: Omit terminal 2
NOTE: Terminal bend radii and lead-in manufacturing option.
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
Actuator Shown
In Pos. 1
T201MH9AVBE
Vertical Actuation
DPDT
NOTE: Terminal bend radii and lead-in manufacturing option.
V3
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
Actuator Shown
In Pos. 1
G
T101MH9V3BE
T102 Models:
Omit center hole.
SPDT
T102 Models:
Omit terminal 2
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
G–41
T Series
Subminiature Toggle Switches
TERMINATIONS
V3
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
T201MH9V3BE
DPDT
Actuator Shown In Pos. 1
CONTACT MATERIAL
OPTION
CODE
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
B
1
GOLD
1
LOW LEVEL/
GOLD
0.4 VA MAX. @ 20 V AC OR DC MAX.
6
P
MATTE-TIN
DRY CIRCUIT
TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC.
4,5
5
Q
SILVER
SILVER
POWER
TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX.
OR 2 AMPS @ 120 V AC OR 28 V DC.
G
R
3
LOW LEVEL/DRY
GOLD
GOLD OVER
2,3
CIRCUIT OR POWER
6
SILVER
MATTE-TIN
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
1
2
3
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
END CONTACTS: Coin silver, with gold plate over nickel plate.
All models
with all options when ordered with R, G, L or Q contact material.
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
B contact material standard with A, AV, V3 & W terminations.
Q contact material standard with C & Z terminations.
4
5
6
END CONTACTS: Coin silver, silver plated.
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
TERMINALS: Copper alloy, with matte-tin over nickel plate.
K, L and M options represent Non RoHS tin lead product and are not recommended for new
designs. For additional information please contact Customer Service.
SEAL
E
EPOXY SEAL
G
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
G–42
相关型号:
T103P3TV3LE
Toggle Switch, SPDT, Latched, 2A, 28VDC, Solder Terminal, High Flatted, Anti Rotation Actuator, Through Hole-straight
ITT
T103P3TZGE
Toggle Switch, SPDT, Latched, 2A, 28VDC, Solder Terminal, High Flatted, Anti-rotation Actuator, Panel Mount-threaded, ROHS COMPLIANT
ITT
T103P3TZQE
Toggle Switch, SPDT, Latched, 2A, 28VDC, Solder Terminal, High Flatted, Anti-rotation Actuator, Panel Mount-threaded, ROHS COMPLIANT
ITT
T103S1TAGE
Toggle Switch, SPDT, Latched, 2A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
ITT
T103S1TAPE
Toggle Switch, SPDT, Latched, 0.02A, 20VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
ITT
T103S1TARE
Toggle Switch, SPDT, Latched, 2A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
ITT
T103S1TAVBE
Toggle Switch, SPDT, Latched, 0.02A, 20VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
ITT
T103S1TAVGE
Toggle Switch, SPDT, Latched, 2A, 28VDC, Solder Terminal, Through Hole-right Angle, ROHS COMPLIANT
ITT
©2020 ICPDF网 联系我们和版权申明