TS02WRE [ITT]
Tiny Slide Switches; 微型滑动开关
| 型号： | TS02WRE |
| 厂家： | 
ITT Cannon |
| 描述： | Tiny Slide Switches |
| 文件： | 总3页 (文件大小：249K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
C&K TS Series
Tiny Slide Switches
Features/Benefits
Typical Applications
• Reliable contact design ensures • Test & measurement equipment
long electrical life
• Computers & peripherals
• Ratings up to 3 AMPS
• Telecommunications &
• Epoxy terminal-seal compatible
networking equipment
with bottom wash cleaning
• RoHS compliant
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (TS01 Model): 3 AMPS @ 120 V AC
or 28 V DC; (TS02, TS03 Models): 1 AMP @ 120 V AC or 28 V
DC. See page I-10 for additional ratings.
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized,
or diallyl phthalate (DAP) (UL 94V-0).
J
ACTUATOR: Nylon, black standard.
HOUSING: Stainless steel or stainless steel, nickel plated.
ELECTRICAL LIFE:
END CONTACTS: B contact material: Copper alloy, with gold plate over
nickel plate. Q contact material: Coin silver, silver plated. See
page I-10 for additional contact materials.
TS01 MODELS: 60,000 make-and-break cycles at full load.
TS02, TS03 MODELS: 30,000 cycles.
CONTACT RESISTANCE: Below 20 m Ω typ. initial @
CENTER CONTACT & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page J-9 for additional contact materials.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC
TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in
Technical Data chapter.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J–8 and J–9. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
TS01 SPDT On-None-On
TS02 SPST Off-None-On
TS03 SPDT On-Off-On
Terminations
A
Right angle, PC thru-hole
(TS01 & TS03 models only)
PC Thru-hole
C
W Wire wrap
Contact Material
B Gold
Q Silver
K Gold, tin-lead
M Silver, tin-lead
G Gold over silver
Seal
E Epoxy
F Epoxy seal and splashproof RTV latex rubber seal
L
Gold over silver, tin-lead
P Gold, matte-tin
Silver, matte-tin
S
R Gold over silver, matte-tin
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–7
C&K TS Series
Tiny Slide Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
CONNECTED TERMINALS
POS. 2
POS. 1
POS. 3
NO.
POLES
C&K marking on opposite side
C&K marking on opposite side
OPEN
MODEL NO.
TS01
SCHEMATIC
ON
ON
NONE
OFF
ON
ON
ON
1-2
2-3
3-1
SP
TS03
SPDT
SPST
TS02
OFF
NONE
OPEN
N/A
J
SPDT
TS02 models:
Omit center terminal
Terminal Nos.
For Reference Only
Part number shown: TS01CBE
All models
with all options when ordered with G, L, M, Q, R or S contact material.
TS02 model not available with A terminations.
TERMINATIONS
C
PC THRU-HOLE
W
WIRE WRAP
PC MOUNTING
TS02 models:
Omit center hole
SPDT and SPST
SPDT and SPST
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
TS01ABE
Horizontal Actuation
SPDT
Actuator shown in pos. 1
Not available with TS02 model.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–8
C&K TS Series
Tiny Slide Switches
CONTACT MATERIAL
RATINGS
OPTION
CODE
RoHS
COMPLIANT
RoHS
COMPLIANT
TERMINAL
PLATING
CONTACT
MATERIAL
3
YES
NO
B
K
P
Q
M
S
YES
YES
YES
YES
YES
YES
YES
YES
YES
GOLD
1
GOLD
LOW LEVEL/DRY
CIRCUIT
6
TIN-LEAD
0.4 VA MAX. @ 20 V AC OR DC MAX.
7
MATTE-TIN
YES
YES
NO
3
GOLD
TS01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC.
TS02, TS03 MODELS: 1 AMP @ 120 V AC OR 28 V DC.
4,5
6
POWER
SILVER
TIN-LEAD
7
MATTE-TIN
YES
YES
NO
3
GOLD
G
L
TS01 MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR
3 AMPS @ 120 V AC OR 28 V DC.
GOLD OVER
LOW LEVEL/DRY
6
TIN-LEAD
2,3
TS02, TS03 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
1 AMP @ 120 V AC OR 28 V DC.
SILVER
J
CIRCUIT OR POWER
7
MATTE-TIN
YES
R
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
END CONTACTS: Coin silver, with gold plate over nickel plate.
All models
with all options when ordered with G, L, M,S or R contact material.
2
3
B contact material standard with A and W terminations.
Q contact material standard with C terminations.
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4
5
6
7
END CONTACTS: Coin silver, silver plated.
NOTE: Any models supplied with Q, B, G, P, S or R contact material are
RoHS compliant. For the latest information regarding RoHS compliance,
please go to: www.ittcannon.com/rohs.
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
TERMINALS: Copper alloy, with matte-tin over nickel plate
SEAL
E
EPOXY SEAL
F
EPOXY SEAL AND SPLASHPROOF RTV LATEX RUBBER SEAL
NOTE: RTV latex rubber seal peels off easily after installation.
Epoxy terminal seal standard. Not available with A termination.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
J–9
相关型号：
©2020 ICPDF网 联系我们和版权申明