CPC1001N [IXYS]
Optocoupler: Unidirectional Input, Single-Transistor Output; 光电耦合器：单向输入，单输出晶体管
| 型号： | CPC1001N |
| 厂家： | 
IXYS CORPORATION |
| 描述： | Optocoupler: Unidirectional Input, Single-Transistor Output |
| 文件： | 总5页 (文件大小：125K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CPC1001N
Optocoupler: Unidirectional Input,
Single-Transistor Output
INTEGRATED
CIRCUITS
DIVISION
Description
CPC1001N is a unidirectional input optocoupler with
a single transistor output. Current transfer ratios
range from 100% to 800%.
Parameter
Rating
30
Units
Breakdown Voltage BVCEO
Current Transfer Ratio (Min)
Saturation Voltage
V
100
%
0.3
V
Input Control Current
0.2
mA
Approvals
Features
• UL Recognized Component: File # E76270
• CSA Certified Component: Certificate # 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
• 100mA Continuous Load Rating
• 1500Vrms Input/Output Isolation
• Small 4-Pin SOP Package
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Version Available
Ordering Information
Applications
• Loop Detect
Part #
CPC1001N
Description
4-Pin SOP (100/Tube)
• Ringing Detect
• Sensor Circuitry
• Instrumentation
• Multiplexers
CPC1001NTR
4-Pin SOP Surface Mount (2000/Reel)
• Data Acquisition
• I/O Subsystems
• Industrial Control
Pin Configuration
1
4
3
+ Control
Load
Load
2
– Control
Pb
e3
DS-CPC1001N-R05
1
www.ixysic.com
CPC1001N
INTEGRATED
CIRCUITS
DIVISION
Absolute Maximum Ratings @ 25ºC
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Parameter
Input Power Dissipation 1
Ratings Units
150
mW
mA
A
Input Control Current
Peak (10ms)
5
1
5
Reverse Input Voltage
Phototransistor 2
V
150
mW
Vrms
°C
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1500
-40 to +85
-40 to +125
°C
1
2
Derate linearly 1.33 mW / ºC
Derate linearly 2.00 mW / ºC
Electrical Characteristics @ 25ºC
Parameters
Conditions
Symbol
Min
Typ
Max
Units
Output Characteristics
Phototransistor Blocking Voltage
Phototransistor Output (Dark) Current
Saturation Voltage
ICEO=10µA
BVCEO
ICEO
30
90
9
-
VP
nA
V
IF=0mA, VCEO=5V
IF=1mA, IC=1mA
-
500
0.3
800
-
VCE(sat)
CTR
-
100
-
-
Current Transfer Ratio
Output Capacitance
IF=0.2mA, VCE=0.5V
CEO=25V, f=1MHz
330
6
%
V
COUT
pF
Input Characteristics
Input Control Current
IC=0.2mA, VCE=0.5V
IF=5mA
IF
VF
IR
-
0.9
-
0.1
1.2
-
0.2
1.4
10
mA
V
Input Voltage Drop
Input Reverse Current
Common Characteristics
Input to Output Capacitance
VR=5V
µA
-
CI/O
-
3
-
pF
Switching Characteristics @ 25ºC
Characteristic
Turn-On Time
Symbol
Test Condition
Typ
1
Units
ton
IF=2mA, VCC=5V, RL=1K
s
Turn-Off Time
toff
30
Switching Time Test Circuit
IF
VCC
RL
IF
VCE
VCE
Pulse Width=5ms
90%
10%
Duty Cycle=1%
tON
tOFF
R05
2
www.ixysic.com
CPC1001N
INTEGRATED
CIRCUITS
DIVISION
PERFORMANCE DATA*
LED Voltage vs. LED Current
(TA=25ºC)
LED Voltage vs. LED Current
(TA=25ºC)
LED Forward Voltage vs.Temperature
50
40
30
20
10
0
1.6
1.5
1.4
1.3
1.2
1.1
1.0
100
I =50mA
IF=20mA
IF=10mA
IFF=5mA
10
1
IF=2mA
IF=1mA
IF=0.2mA
0.1
1.1
1.2
1.3
1.4
1.5
1.6
1.1
0.0
-40
1.2
1.3
1.4
1.5
1.6
-40
-20
0
20
40
60
80
100
LED Forward Voltage (V)
LED Forward Voltage (V)
Temperature (ºC)
Typical CTR vs. LED Forward Current
(VCE=0.5V)
Typical ICE Current vs.Temperature
(VCE=0.5V)
Typical Voltage vs. Current
(TA=25ºC)
350
300
250
200
150
100
100
10
1
30
25
20
15
10
5
IF=10mA
IF=10mA
IF=5mA
IF=2mA
IF=5mA
IF=2mA
IF=1mA
IF=0.5mA
IF=0.2mA
IF=0.1mA
55ºC
25ºC
85ºC
-40ºC
IF=1mA
I =0.5mA
IFF=0.2mA
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
0.1
1
10
-40
-20
0
20
40
60
80
100
Temperature (ºC)
Collector Voltage (V)
LED Forward Current (mA)
Typical Saturation Voltage
vs.Temperature
Collector Leakage Current
vs.Temperature
(IF=2mA, IC=1mA)
Blocking Voltage vs.Temperature
0.20
0.18
0.16
0.14
0.12
0.10
0.08
500
400
300
200
100
0
96
95
94
93
92
91
90
89
88
VCC=10V
VCC=5V
VCC=3V
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
-20
0
20
40
60
80
100
Temperature (ºC)
Temperature (ºC)
Temperature (ºC)
Turn-On Time vs. Load Resistance
(TA=25ºC, VCC=5V)
Turn-Off Time vs. Load Resistance
(TA=25ºC, VCC=5V)
1000
100
10
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Refer to the Test Circuit
on the previous page
for these two graphs.
IF=1mA
IF=5mA
IF=2mA
IF=1mA
IF=2mA
IF=5mA
0.1
1
10
100
0.1
1
10
100
Load Resistance (k:)
Load Resistance (k:)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R05
www.ixysic.com
3
CPC1001N
INTEGRATED
CIRCUITS
DIVISION
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1001N
MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
MaximumTemperature xTime
CPC1001N
260ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
e3
R05
4
www.ixysic.com
CPC1001N
INTEGRATED
CIRCUITS
DIVISION
MECHANICAL DIMENSIONS
CPC1001N
4.089 ± 0.203
(0.161 ± 0.008)
Recommended PCB Land Pattern
0.200 ± 0.025
(0.008 ± 0.001)
0.60
(0.0217)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003)
0.432 ± 0.127
(0.017 ± 0.005)
5.60
1.02 ± 0.025
(0.040 ± 0.001)
(0.2205)
Pin 1
2.54 Typ
1.30
(0.0512)
(0.100 Typ)
2.184 Max
(0.086 Max)
2.54
(0.10)
Lead to package standoff:
0.0637 0.0383
(0.0025 0.0015)
Dimensions
mm
(inches)
0.762 ± 0.102
(0.030 ± 0.004)
0.381 TYP.
(0.015 TYP.)
CPC1001NTR Tape & Reel
330.2 Dia
(13.00 Dia)
W=12.00
(0.472)
Top Cover
Tape Thickness
0.102 Max
B0=4.70
(0.185)
(0.004 Max)
P=8.00
(0.315)
A0=6.50
(0.256)
K0=2.70
(0.106)
K1=2.30
(0.091)
User Direction of Feed
Dimensions
mm
(inches)
Embossed
Carrier
Embossment
NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to
its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1001N-R05
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/13/2012
相关型号：
©2020 ICPDF网 联系我们和版权申明