LOC211PL [IXYS]
Optocoupler - Transistor Output, 2 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, SOIC-16;
| 型号： | LOC211PL |
| 厂家： | 
IXYS CORPORATION |
| 描述： | Optocoupler - Transistor Output, 2 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, SOIC-16 输出元件 |
| 文件： | 总4页 (文件大小：389K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LOC211P
Linear Optocouplers
Description
Features
The LOC211P Dual Linear Optocoupler features an
infrared LED optically coupled with two
phototransistors. One feedback (input)
• 16 Pin SOIC Package (PCMCIA Compatible)
• Couples Analog and Digital Signals
• Wide Bandwidth (>200kHz)
• High Gain Stability
• Low Input/Output Capacitance
• Low Power Consumption
• 0.01% Servo Linearity
• THD 87dB Typical
• Machine Insertable, Wave Solderable
• Surface Mount and Tape Reel Versions Available
phototransistor is used to generate a control signal
that provides a servomechanism to the LED drive
current, thus compensating for the LEDs nonlinear
time and temperature characteristics. The other
(output) phototransistor provides an output signal that
is linear with respect to the servo LED current. The
product features wide bandwidth, high input to output
isolation and excellent servo linearity.
Applications
• Modem Transformer Replacement With No
Insertion Loss
• Digital Telephone Isolation
• Power Supply Feedback Voltage/Current
• Medical Sensor Isolation
Approvals
• UL Recognized: File Number E76270
• CSA Certified: File Number LR 43639-10
• Certified to:
• EN 60950
• Audio Signal Interfacing
• EN 41003
• Isolation of Process Control Transducers
Ordering Information
Pin Configuration
Part #
Description
LOC211P
LOC211PTR
16 Pin Flatpack (50/Tube)
16 Pin Flatpack (1000/Reel)
LOC211 Pinout
1
16
– LED
NC
2
3
4
15
14
13
+ LED
+ Vcc
I1
NC
+Vcc
I2
K3 Sorted Bins
Bin Matrix
Bin 1 = 0.733 - 0.886
Bin 2 = 0.887 - 1.072
Suffix
Bin
Top Pole
Optocoupler* Optocoupler**
Bottom Pole
5
12
– LED
NC
NC
6
7
8
11
10
9
K
L
M
N
1
1
2
2
1
2
1
2
+ LED
+Vcc
I2
+Vcc
I1
*Top Pole Optocoupler: Pins 1,2,3,4,13, and 14
**Bottom Pole Optocouplers: Pins 7 through 12
•
Orders for the LOC211P product will be shipped using bins
available at the date of the order. Any bin can be shipped.
Part Number Information
The LOC211 are shipped in anti-static tubes (50
pieces each) or tape/reel (1,000 pieces each). Each
container has only 1 bin combination which will be
branded on each part with the appropriate bin letter
K, L, M, or N in the lower right hand corner. Suffix
representation is described in the “Bin Matrix”.
DS-LOC211P-R4.4
1
www.clare.com
LOC211P
Absolute Maximum Ratings (@ 25o C)
Parameter
Min Typ Max Units
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Input Power Dissipation
Input Control Current
Input LED Reverse Voltage
Peak (10ms)
-
-
-
-
-
-
-
-
-
-
1501 mW
100 mA
5
1
V
A
Total Package Dissipation
8002 mW
Isolation Voltage
Input to Output
Operational Temperature
Storage Temperature
Soldering Temperature
(10 Seconds Max)
1 Derate Linearly 1.33 mW/°C
2 Derate Linearly 6.67 mW/°C
3750
-40
-40
-
-
-
VRMS
°C
+85
+125 °C
+220 °C
-
-
Electrical Characteristics
Parameter
Conditions
Symbol
Min
Typ
Max
Units
Input Characteristics @ 25°C
LED Voltage Drop
Reverse LED Current
IF=2-10mA
VR=5V
VF
IR
0.9
-
1.2
-
1.4
10
V
µA
Coupler/Detector Characteristics @ 25°C
Dark Current
IF=0mA, VCC=15V
ID
K1
K2
K3
∆K3
-
1
-
-
-
-
25
nA
-
-
-
%
K1, Servo Gain (I1/IF)
K2, Forward Gain (I2/IF)
K3, Transfer Gain (K2/K1)
∆K3, Transfer Gain Linearity
(non-servoed)
IF=2-10mA, VCC=15V
IF=2-10mA, VCC=15V
IF=2-10mA, VCC=15V
IF=2-10mA
0.008
0.006
0.733
-
0.030
0.030
1.072
1.0
K3 Temperature Coefficient
Common Mode
Rejection Ratio
IF=2-10mA, Vdet=-5V
∆K3/∆T
CMRR
-
-
0.005
130
-
-
%/°C
dB
V=20VP-P, RL=2KΩ,
F=100Hz
Total Harmonic Distortion
Frequency Response
FO=350Hz, 0dBm
Photoconductive Operation BW (-3dB)
Photovoltaic Operation
THD
-96
-
-
-87
200
-
-80
-
40
dB
kHz
kHz
BW (-3dB)
Input/Output Capacitance
-
CI/O
-
3
-
pF
NOTE: All parameters above are for each optocoupler.
Rev. 4.4
2
www.clare.com
LOC211P
PERFORMANCE DATA*
LOC211
LED Current (IF) vs.
LED Forward Voltage (VF)
LOC211
LED Current (IF) vs.
LED Forward Voltage (VF)
LOC211
Servo Gain vs.
LED Current & Temperature
0.014
0.012
0.010
0.008
35
30
25
100
0°C
25°C
50°C
10
20
15
10
70°C
85°C
0.006
0.004
1
5
0
0.002
0
0.1
1.1
1.4
1
1.2
1.3
1
1.4
0
2
4
10
12
1.1
1.2
1.3
6
8
LED Forward Voltage (V)
LED Forward Voltage (V)
LED Current (mA)
LOC211
Servo-Photocurrent vs.
LED Current & Temperature
LOC211
LOC211
Normalized Servo-Photocurrent vs.
LED Current & Temperature
Typical LED Forward Voltage Drop vs.
Temperature
140
120
100
80
1.4
1.2
1.0
0.8
1.7
1.6
1.5
1.4
1.3
1.2
0°C
0°C
25°C
50°C
25°C
50°C
70°C
85°C
20mA
10mA
5mA
70°C
85°C
60
40
0.6
0.4
1.1
20
0
0.2
0
1.0
0.9
0
2
4
10
12
0
2
4
10
12
-40
-15
10
35
60
85
6
8
6
8
LED Current (mA)
LED Current (mA)
Temperature (°C)
* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
Rev. 4.4
www.clare.com
3
MECHANICAL DATA
10.160 0.381
PC Board Pattern
(Top View)
16 Pin SOIC (“P” Suffix)
(0.400 0.015)
1.270 TYP.
(0.050 TYP.)
1.270
(0.050)
1.981 TYP.
(0.078 TYP.)
2.108 MAX.
7.493 0.127
10.363 0.127
(0.408 0.005)
(0.083 MAX.)
(0.295 0.005)
9.728 0.051
(0.383 0.002)
1.016 TYP.
0.254 0.0127
(0.010 0.0005)
(0.040 TYP.)
1.193
(0.047)
0.406 TYP.
(0.016) TYP.
0.787
(0.031)
8.890 TYP.
(0.350 TYP.)
Tape and Reel Packaging for 16 Pin SOIC Package
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
16.30 MAX.
(0.642 MAX.)
1
16
10.70
(0.421)
Top Cover
Tape
12.00
(0.172)
Embossed Carrier
10.90
(0.430)
2.70
(0.106)
Embossment
User Direction of Feed
4.90
(0.193)
Dimensions
mm
(inches)
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support
or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make
changes to its products at any time without notice.
Specification: DS-LOC211P-R4.4
©Copyright 2003, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
2/6/03
相关型号：
©2020 ICPDF网 联系我们和版权申明