N2593MK180 [IXYS]
Silicon Controlled Rectifier, 5135A I(T)RMS, 1800V V(DRM), 1800V V(RRM), 1 Element,;型号: | N2593MK180 |
厂家: | IXYS CORPORATION |
描述: | Silicon Controlled Rectifier, 5135A I(T)RMS, 1800V V(DRM), 1800V V(RRM), 1 Element, 栅 栅极 |
文件: | 总11页 (文件大小:272K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Date:- 19 Jul, 2005
Data Sheet Issue:- 1
WESTCODE
IXYS
An
Company
Provisional Data
Wespack Phase Control Thyristor
Types N2593MK120 to N2593MK180
Development Type No.: NX149MK120-180
Absolute Maximum Ratings
MAXIMUM
LIMITS
VOLTAGE RATINGS
UNITS
VDRM
VDSM
VRRM
VRSM
Repetitive peak off-state voltage, (note 1)
Non-repetitive peak off-state voltage, (note 1)
Repetitive peak reverse voltage, (note 1)
Non-repetitive peak reverse voltage, (note 1)
1200-1800
1200-1800
1200-1800
1200-1900
V
V
V
V
MAXIMUM
LIMITS
OTHER RATINGS
UNITS
IT(AV)M
IT(AV)M
IT(AV)M
Maximum average on-state current, Tsink=55°C, (note 2)
Maximum average on-state current. Tsink=85°C, (note 2)
Maximum average on-state current. Tsink=85°C, (note 3)
2593
1769
971
A
A
A
IT(RMS)M Nominal RMS on-state current, Tsink=25°C, (note 2)
5135
4411
34.5
A
IT(d.c.)
ITSM
ITSM2
I2t
D.C. on-state current, Tsink=25°C, (note 4)
A
Peak non-repetitive surge tp=10ms, Vrm=60%VRRM, (note 5)
kA
kA
A2s
A2s
≤
38.0
Peak non-repetitive surge tp=10ms, Vrm 10V, (note 5)
I2t capacity for fusing tp=10ms, Vrm=60%VRRM, (note 5)
5.95×106
7.22×106
100
I2t
≤
I2t capacity for fusing tp=10ms, Vrm 10V, (note 5)
(continuous, 50Hz)
(repetitive, 50Hz, 60s)
(non-repetitive)
(di/dt)cr Critical rate of rise of on-state current (note 6)
200
A/µs
400
VRGM
PG(AV)
PGM
Peak reverse gate voltage
Mean forward gate power
Peak forward gate power
Operating temperature range
Storage temperature range
5
V
4
W
W
°C
°C
30
Tj op
-40 to +125
-40 to +150
Tstg
Notes:-
1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C.
2) Double side cooled, single phase; 50Hz, 180° half-sinewave.
3) Cathode side cooled, single phase; 50Hz, 180° half-sinewave.
4) Double side cooled.
5) Half-sinewave, 125°C Tj initial.
≤
6) VD=67% VDRM, ITM=2000A, IFG=2A, tr 0.5µs, Tcase=125°C.
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 1 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
Characteristics
PARAMETER
MIN.
TYP. MAX. TEST CONDITIONS
UNITS
(Note 1)
VTM
VTM
VT0
rT
Maximum peak on-state voltage
Maximum peak on-state voltage
Threshold voltage
-
-
1.40 ITM=3000A
2.15 ITM=7800A
0.940
V
V
V
-
-
-
-
Slope resistance
-
-
0.154
Ω
m
(dv/dt)cr Critical rate of rise of off-state voltage
1000
-
-
VD=80% VDRM, linear ramp, gate o/c
µ
V/ s
IDRM
IRRM
VGT
IGT
VGD
IH
Peak off-state current
Peak reverse current
Gate trigger voltage
-
-
-
-
-
-
-
-
-
-
-
-
-
100 Rated VDRM
100 Rated VRRM
mA
mA
V
-
-
3.0
Tj=25°C
300
VD=10V, IT=3A
Gate trigger current
-
mA
V
Gate non-trigger voltage
Holding current
-
0.25 Rated VDRM
1000 Tj=25°C
-
mA
µs
µs
µC
µC
A
tgd
Gate-controlled turn-on delay time
Turn-on time
0.8
1.4
3600
2150
150
29
2.0
VD=67% VDRM, IT=2000A, di/dt=10A/µs,
I
FG=2A, tr=0.5µs, Tj=25°C
tgt
3.0
Qrr
Qra
Irr
Recovered charge
-
Recovered charge, 50% Chord
Reverse recovery current
Reverse recovery time
2400
I
TM=1000A, tp=1000µs, di/dt=10A/µs,
Vr=50V
-
-
trr
µs
I
TM=1000A, tp=1000µs, di/dt=10A/µs,
-
-
350
600
-
-
Vr=50V, Vdr=80%VDRM, dVdr/dt=20V/µs
ITM=1000A, tp=1000µs, di/dt=10A/µs,
Vr=50V, Vdr=80%VDRM, dVdr/dt=200V/µs
tq
Turn-off time
µs
-
-
-
0.0140 Double side cooled
0.0253 Anode side cooled
0.0314 Cathode side cooled
K/W
K/W
K/W
kN
-
RthJK
Thermal resistance, junction to heatsink
-
-
-
F
Mounting force
Weight
25
-
31
-
Note 2.
Wt
270
g
Notes:-
1) Unless otherwise indicated Tj=125°C.
2) For other clamp forces, please consult factory.
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 2 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
Notes on Ratings and Characteristics
1.0 Voltage Grade Table
V
DRM VDSM VRRM
VRSM
V
VD VR
DC V
810
Voltage Grade
V
12
14
16
18
1200
1400
1600
1800
1300
1500
1700
1900
930
1040
1150
2.0 Extension of Voltage Grades
This report is applicable to other voltage grades when supply has been agreed by Sales/Production.
3.0 De-rating Factor
A blocking voltage de-rating factor of 0.13%/°C is applicable to this device for Tj below 25°C.
4.0 Repetitive dv/dt
Standard dv/dt is 1000V/µs.
5.0 Snubber Components
When selecting snubber components, care must be taken not to use excessively large values of snubber
capacitor or excessively small values of snubber resistor. Such excessive component values may lead to
device damage due to the large resultant values of snubber discharge current. If required, please consult
the factory for assistance.
6.0 Rate of rise of on-state current
The maximum un-primed rate of rise of on-state current must not exceed 400A/µs at any time during turn-
on on a non-repetitive basis. For repetitive performance, the on-state rate of rise of current must not
exceed 200A/µs at any time during turn-on. Note that these values of rate of rise of current apply to the
total device current including that from any local snubber network.
7.0 Gate Drive
The nominal requirement for a typical gate drive is illustrated below. An open circuit voltage of at least 30V
is assumed. This gate drive must be applied when using the full di/dt capability of the device.
IGM
4A/µs
IG
tp1
The magnitude of IGM should be between five and ten times IGT, which is shown on page 2. Its duration
(tp1) should be 20µs or sufficient to allow the anode current to reach ten times IL, whichever is greater.
Otherwise, an increase in pulse current could be needed to supply the necessary charge to trigger. The
‘back-porch’ current IG should remain flowing for the same duration as the anode current and have a
magnitude in the order of 1.5 times IGT.
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 3 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
8.0 Computer Modelling Parameters
8.1 Device Dissipation Calculations
∆T
Rth
2
−VT 0 + VT 0 + 4⋅ ff 2 ⋅r ⋅WAV
WAV =
T
IAV =
and:
2⋅ ff 2 ⋅r
T
∆T = Tj max −TK
Ω,
Where VT0=0.94V, rT=0.154
R
= Supplementary thermal impedance, see table below and
th
ff
= Form factor, see table below.
Supplementary Thermal Impedance
30° 60° 90°
Conduction Angle
120°
180°
270°
d.c.
Square wave Double Side Cooled
0.0175 0.0168 0.0162 0.0157 0.0150 0.0143 0.0140
0.0357 0.0344 0.0335 0.0329 0.0322 0.0316 0.0314
0.0169 0.0163 0.0158 0.0151 0.0140
Square wave Cathode Side Cooled
Sine wave Double Side Cooled
Sine wave Cathode Side Cooled
0.0349 0.0340 0.0334 0.0324 0.0318
Form Factors
Conduction Angle
Square wave
Sine wave
30°
3.46
3.98
60°
2.45
2.78
90°
2
2.22
120°
1.73
1.88
180°
1.41
1.57
270°
1.15
d.c.
1
8.2 Calculating VT using ABCD Coefficients
The on-state characteristic IT vs. VT, on page 6 is represented in two ways;
(i)
the well established VT0 and rT tangent used for rating purposes and
(ii)
a set of constants A, B, C, D, forming the coefficients of the representative equation for VT in
terms of IT given below:
VT A B ln IT C IT D IT
= + ⋅ ( )+ ⋅ + ⋅
The constants, derived by curve fitting software, are given below for both hot and cold characteristics. The
resulting values for VT agree with the true device characteristic over a current range, which is limited to
that plotted.
25°C Coefficients
125°C Coefficients
A
B
C
D
1.0861917
A
B
C
D
0.4300106
0.1133246
-9.15653×10-4
1.012637×10-4
1.072219×10-3
2.011823×10-4
-9.874997×10-3
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 4 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
8.3 D.C. Thermal Impedance Calculation
−t
τ p
p=n
r = r ⋅ 1− e
∑
t
p
p=1
p = 1 n, n
to
Where
is the number of terms in the series and:
t = Duration of heating pulse in seconds.
rt
= Thermal resistance at time t.
r= Amplitude of pth term.
τ
= Time Constant of rth term.
The coefficients for this device are shown in the tables below:
D.C. Double Side Cooled
Term
rp
τp
1
2
3
4
9.165875×10-3
0.3739650
3.090048×10-3
0.1072757
4.533206×10-4
0.02914000
1.337550×10-3
4.430391×10-3
D.C. Double Side Cooled
2
Term
rp
τp
1
3
4
0.02275
2.682304
4.710571×10-3
0.239177
3.064613×10-3
0.06309731
6.485916×10-4
2.003393×10-3
9.0 Reverse recovery ratings
(i) Qra is based on 50% Irm chord as shown in Fig. 1
Fig. 1
µ
(ii) Qrr is based on a 150 s integration time i.e.
µs
150
Qrr = irr .dt
∫
0
(iii)
t1
t2
K Factor =
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 5 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
Curves
Figure 1 – On-state characteristics of Limit device
Figure 2 – Transient thermal impedance
0.1
10000
N2593MK120-180
AD Issue 1
KSC 0.0314K/W
ASC 0.0253K/W
DSC 0.0140K/W
N2593MK120-180
AD Issue 1
Tj = 25°C
Tj = 125°C
0.01
1000
0.001
0.0001
0.00001
100
0
0.5
1
1.5
2
2.5
0.0001
0.001
0.01
0.1
Time (s)
1
10
100
Instantaneous On-state voltage - VTM (V)
Figure 3 – Gate Characteristics – Trigger limits
Figure 4 – Gate Characteristics – Power Curves
7
18
N2593MK120-180
N2593MK120-180
AD Issue 1
Tj=25°C
AD Issue 1
Tj=25°C
16
6
Max VG dc
14
Max VG dc
5
12
10
4
IGT, VGT
8
3
2
PG Max 30W dc
6
4
PG 4W dc
1
2
IGD, VGD
Min VG dc
0.8
Min VG dc
0
0
0
2
4
6
8
10
0
0.2
0.4
0.6
1
Gate Trigger Current - IGT (A)
Gate Trigger Current - IGT (A)
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 6 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
Figure 5 – Total Recovered Charge, Qrr
Figure 6 – Recovered Charge, Qra (50% chord)
100000
10000
N2593MK120-180
N2593MK120-180
AD Issue 1
Tj=125°C
AD Issue 1
Tj=125°C
4000A
2000A
1000A
500A
4000A
2000A
1000A
500A
10000
1000
1000
1
10
100
1000
1
10
100
1000
di/dt (A/µs)
di/dt (A/µs)
Figure 7 – Peak Reverse Recovery Current, Irm
Figure 8 – Maximum Recovery Time, trr (50% chord)
10000
100
N2593MK120-180
N2593MK120-180
AD Issue 1
Tj=125°C
AD Issue 1
Tj=125°C
4000A
2000A
1000A
1000
500A
4000A
2000A
10
1000A
500A
100
10
1
1
10
100
1000
1
10
100
1000
di/dt (A/µs)
di/dt (A/µs)
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 7 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
Figure 9 – On-state current vs. Power dissipation –
Double Side Cooled (Sine wave)
Figure 10 – On-state current vs. Heatsink temperature
– Double Side Cooled (Sine wave)
8000
140
N2593MK120-180
N2593MK120-180
AD Issue 1
AD Issue 1
180°
7000
120
120°
90°
60°
30°
6000
5000
4000
3000
2000
1000
0
100
80
60
40
30°
60°
90° 120°
180°
20
0
0
500
1000
1500
2000
2500
3000
3500
0
500
1000
1500
2000
2500
3000
3500
Mean forward current (A) (Whole cycle averaged)
Mean forward current (A) (Whole cycle averaged)
Figure 11 – On-state current vs. Power dissipation –
Double Side Cooled (Square wave)
Figure 12 – On-state current vs. Heatsink temperature
– Double Side Cooled (Square wave)
140
8000
N2593MK120-180
N2593MK120-180
AD Issue 1
AD Issue 1
d.c.
270°
7000
120
180°
120°
90°
60°
6000
30°
100
80
5000
4000
3000
2000
1000
0
60
40
30°
60° 90° 120° 180° 270° d.c.
20
0
0
1000
2000
3000
4000
5000
0
1000
2000
3000
4000
5000
Mean Forward Current (Amps) (Whole Cycle Averaged)
Mean Forward Current (Amps) (Whole Cycle Averaged)
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 8 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
Figure 13 – On-state current vs. Power dissipation –
Cathode Side Cooled (Sine wave)
Figure 14 – On-state current vs. Heatsink temperature
– Cathode Side Cooled (Sine wave)
3500
140
N2593MK120-180
N2593MK120-180
AD Issue 1
AD Issue 1
180°
120°
90°
60°
3000
2500
2000
1500
1000
500
120
30°
100
80
60
40
30°
60°
90° 120° 180°
20
0
0
0
500
1000
1500
2000
0
500
1000
1500
2000
Mean forward current (A) (Whole cycle averaged)
Mean forward current (A) (Whole cycle averaged)
Figure 15 – On-state current vs. Power dissipation –
Cathode Side Cooled (Square wave)
Figure 16 – On-state current vs. Heatsink temperature
– Cathode Side Cooled (Square wave)
3500
140
N2593MK120-180
N2593MK120-180
AD Issue 1
AD Issue 1
d.c.
270°
180°
120°
90°
3000
2500
2000
1500
1000
500
120
60°
30°
100
80
60
40
30°
60° 90° 120° 180° 270° d.c.
20
0
0
0
500
1000
1500
2000
2500
0
500
1000
1500
2000
2500
Mean Forward Current (Amps) (Whole Cycle Averaged)
Mean Forward Current (Amps) (Whole Cycle Averaged)
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 9 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
Figure 17 – Maximum surge and I2t Ratings
100000
1.00E+08
I2t: VRRM 10V
≤
I2t: 60% VRRM
≤
ITSM: VRRM 10V
10000
1.00E+07
ITSM: 60% VRRM
Tj (initial) = 125°C
N2593MK120-180
AD Issue 1
1000
1.00E+06
1
3
5
10
1
5
10
50 100
Duration of surge (ms)
Duration of surge (cycles @ 50Hz)
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 10 of 11
July, 2005
WESTCODE An IXYS Company
Wespack
Phase Control Thyristor Types N2593MK120 to N2593MK180
Outline Drawing & Ordering Information
101A353
ORDERING INFORMATION
(Please quote 10 digit code as below)
N2593
MK
0
Voltage code
Fixed turn-off
VDRM/100
time code
12-18
Fixed
Fixed
Type Code
outline code
Order code: N2593MK140 – 1400V VDRM, VRRM, 14mm clamp height capsule.
IXYS Semiconductor GmbH
Edisonstraße 15
Westcode Semiconductors Ltd
Langley Park Way, Langley Park,
Chippenham, Wiltshire, SN15 1GE.
Tel: +44 (0)1249 444524
D-68623 Lampertheim
Tel: +49 6206 503-0
WESTCODE
Fax: +49 6206 503-627
Fax: +44 (0)1249 659448
An IXYS Company
E-mail: marcom@ixys.de
E-mail: WSL.sales@westcode.com
IXYS Corporation
Westcode Semiconductors Inc
3270 Cherry Avenue
3540 Bassett Street
www.westcode.com
Santa Clara CA 95054 USA
Tel: +1 (408) 982 0700
Fax: +1 (408) 496 0670
E-mail: sales@ixys.net
Long Beach CA 90807 USA
Tel: +1 (562) 595 6971
Fax: +1 (562) 595 8182
www.ixys.com
E-mail: WSI.sales@westcode.com
The information contained herein is confidential and is protected by Copyright. The information may not be used or disclosed
except with the written permission of and in the manner permitted by the proprietors Westcode Semiconductors Ltd.
© Westcode Semiconductors Ltd.
In the interest of product improvement, Westcode reserves the right to change specifications at any time without prior notice.
Devices with a suffix code (2-letter, 3-letter or letter/digit/letter combination) added to their generic code are not necessarily
subject to the conditions and limits contained in this report.
Provisional Data Sheet. Types N2593MK120 to N2593MK180 Issue 1
Page 11 of 11
July, 2005
相关型号:
N25Q032A13E1240E
32-Mbit 3 V, multiple I/O, 4-Kbyte subsector erase, XiP enabled, serial flash memory with 108 MHz SPI bus interface
MICRON
©2020 ICPDF网 联系我们和版权申明