PLA171PHTR [IXYS]
Transistor Output SSR, 1-Channel, 5000V Isolation, ROHS COMPLIANT, SURFACE MOUNT PACKAGE-6;
| 型号： | PLA171PHTR |
| 厂家： | 
IXYS CORPORATION |
| 描述： | Transistor Output SSR, 1-Channel, 5000V Isolation, ROHS COMPLIANT, SURFACE MOUNT PACKAGE-6 输出元件 光电 |
| 文件： | 总6页 (文件大小：118K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PLA171PH
Single-Pole Normally Open
OptoMOS® Relay
A CLARE HI-REL PRODUCT
Description
Parameter
Load Voltage
Rating
800
100
50
Units
VP
Clare's Hi-Rel PLA171PH is a single-pole, normally
open (1-Form-A) Solid State Relay that uses optically
coupled MOSFET technology to provide enhanced
input-to-output isolation of 5000Vrms. The efficient
MOSFET switches and photovoltaic die use Clare’s
patented OptoMOS® architecture.
Load Current
mA
Ω
mA
Maximum On-Resistance
Input Control Current
2
Features
Control of the optically-coupled output is by the input
GaAIAs infrared LED. The PLA171PH is designed
to replace electromechanical relays and offers the
superior reliability associated with Clare's Hi-Rel
Solid State devices. This device provides bounce-free
switching in a compact surface mount package.
• Operational Temperature Range: -40ºC to +105ºC
• 800VP Blocking Voltage
• 5000Vrms Input/Output Isolation
• Electrical Tests at Room Temperature and at 85ºC
• 100% Burn-In
JESD22-A108 / MIL-STD-883 Method 1015
• 100% Post Burn-In Electrical Test
• Small 6-Pin Surface Mount Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
Approvals
• UL Certified Component: File # E76270
• EN/IEC 60950 Certified Component:
TUV Certificate B 09 07 49410 004
• Meets Requirements of:
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Flammability Rating UL 94 V-0
AEC-Q101 "Temperature Grade 2" - Pending
Ordering Information
Part #
PLA171PH
Description
6-Lead Surface Mount (50/Tube)
Applications
• Instrumentation
PLA171PHTR
6-Lead Surface Mount, Tape & Reel (1000/Reel)
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Automotive High-Voltage Circuitry
• Aerospace
Pin Configuration
AC/DC Configuration
1
2
3
4
8
NC
+ Control
– Control
NC
Load
Load
• Industrial Controls
5
Switching Characteristics of
Normally Open Devices
Form-A
IF
90%
10%
ILOAD
t
t
off
on
RoHS
2002/95/EC
Pb
e3
DS-PLA171PH-R02
1
www.clare.com
PLA171PH
Absolute Maximum Ratings
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
(@ 25ºC Unless otherwise noted)
Parameter
Blocking Voltage (-40ºC to +105ºC)
Ratings Units
800
VP
Reverse Input Voltage
5
50
V
Input Control Current
mA
A
Peak (10ms)
1
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output (60 Seconds)
Operational Temperature
Storage Temperature
150
mW
mW
Vrms
°C
800
5000
-40 to +105
-40 to +125
°C
1
Derate linearly 3.33 mW / ºC
Derate linearly 6.67 mW / ºC
2
Electrical Characteristcs
Parameter
Conditions
Symbol
Min
Typ
Max
Units
Output Characteristics @ 25°C
Load Current
Continuous 1
Peak
IF=2mA
IL
-
-
-
-
-
-
-
100
350
50
85
1
mA
IF=2mA , t=10ms
IF=2mA, IL= 100mA
IF=5mA, IL=1mA
VL=800VP
ILPK
On-Resistance 2
40
70
-
Ω
RON
Off-State Leakage Current
Switching Speeds
Turn-On
ILEAK
µA
ton
toff
-
-
-
0.42
0.15
11
5
5
-
IF=5mA, VL=10V
ms
pF
Turn-Off
Output Capacitance
IF=0mA, VL=50V, f=1MHz
COUT
Output Characteristics @ 105°C
On-Resistance 2
IF=5mA, IL=30mA
IF=5mA, IL=1mA
VL=800VP
-
-
-
75
115
-
110
140
5
Ω
RON
Off-State Leakage Current
Input Characteristics @ 25°C
Input Control Current 3
ILEAK
µA
IL=100mA
-
IF
IF
-
0.39
2
-
mA
mA
V
Input Dropout Current
0.1
0.9
-
-
1.2
-
Input Voltage Drop
IF=5mA
VR=5V
VF
IR
1.4
10
Reverse Input Current
µA
Common Characteristics @ 25°C
Input to Output Capacitance
-
CI/O
-
3
-
pF
1
2
3
Load derates linearly from 100mA @ 25oC to 40mA @105oC.
Measurement taken within 1 second of on-time.
For applications requiring high temperature operation (greater than 60oC) an LED drive current of 5mA is recommended.
R02
2
www.clare.com
PLA171PH
PERFORMANCE DATA*
Typical LED Forward Voltage Drop
(N=50, IF=5mA,TA=25ºC)
Typical Turn-On Time
(N=50, IF=5mA, IL=100mA,TA=25ºC)
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mA,TA=25ºC)
35
30
25
20
15
10
5
25
20
15
10
5
20
15
10
5
0
0
0
1.230 1.235 1.240 1.245 1.250 1.255
0.36 0.38 0.40 0.42 0.44 0.46 0.48
0.135 0.140 0.145 0.150 0.155 0.160 0.165
LED Forward Voltage (V)
Turn-On Time (ms)
Turn-Off Time (ms)
Typical On-Resistance Distribution
(N=50, IF=2mA, IL=100mA,TA=25ºC)
Typical Blocking Voltage Distribution
(N=50,TA=25ºC)
Typical IF for Switch Operation
(N=50, IL=100mA,TA=25ºC)
35
15
10
5
15
10
5
30
25
20
15
10
5
0
0
0
40.0
40.5
41.0
41.5
42.0
42.5
956 964 972 980 988 996 1004
0.33 0.35 0.37 0.39 0.41 0.43 0.45
On-Resistance (Ω)
Blocking Voltage (VP)
LED Current (mA)
Typical Turn-Off Time
vs.Temperature
Typical LED Forward Drop
vs.Temperature
Turn-On Time vs.Temperature
0.22
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
1.6
1.5
1.4
1.3
1.2
1.1
1.0
1.0
0.8
0.6
0.4
0.2
0.0
IF=2mA
IF=2mA
IF=5mA
IF=5mA
-40 -20
0
20
40
60
80 100 120
-40 -20
0
20
40
60
80 100 120
-40 -20
0
20
40
60
80 100 120
Temperature (ºC)
Temperature (ºC)
Temperature (ºC)
Typical Load Current
vs. Load Voltage
(IF=2mA,TA=25ºC)
LED Current to Operate
(IL=55mA)
Typical Load Current vs.Temperature
(IF=5mA)
100
50
0.70
0.65
0.60
0.55
0.50
0.45
0.40
0.35
120
100
80
0
60
-50
-100
40
20
-6
-4
-2
0
2
4
6
-40 -20
0
20
40
60
80 100 120
-40 -20
0
20
40
60
80 100 120
Voltage (V)
Temperature (ºC)
Temperature (ºC)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R02
www.clare.com
3
PLA171PH
PERFORMANCE DATA*
Typical Leakage Current
Typical On-Resistance
vs.Temperature
(IF=5mA)
Typical Blocking Voltage
vs.Temperature
vs.Temperature
(VL=800V)
300
250
200
150
100
50
1100
80
70
60
50
40
30
20
1050
1000
950
IL=30mA
IL=55mA
0
900
-40 -20
0
20
40
60
80 100 120
-40 -20
0
20
40
60
80 100 120
-40 -20
0
20
40
60
80 100 120
Temperature (ºC)
Temperature (ºC)
Temperature (ºC)
Energy Rating Curve
1.0
0.8
0.6
0.4
0.2
0.0
10μs 100μs 1ms 10ms 100ms 1s
10s 100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R02
4
www.clare.com
PLA171PH
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
PLA171PH
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
MaximumTemperature xTime
PLA171PH
260ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC
Pb
e3
R02
www.clare.com
5
PLA171PH
MECHANICAL DIMENSIONS
PLA171PH
Surface Mount Package
Recommended PCB Land Pattern
2.286 MAX.
(0.090 MAX.)
2.159 TYP.
(0.085 TYP.)
2.540 0.127
(0.100 0.005)
7.62
(0.30)
0.635 0.127
7.620 0.254
6.350 0.127
(0.250 0.005)
9.398 0.127
(0.370 0.005)
(0.025 0.005)
(0.300 0.010)
8.70
(0.3425)
0.203
(0.008)
8.077 0.127
(0.318 0.005)
1.55
(0.0610)
2.54
(0.10)
9.652 0.381
(0.380 0.015)
0.65
(0.0255)
2.159 0.025
(0.085 0.001)
Dimensions
mm
(inches)
0.457 0.076
(0.018 0.003)
PLA171PH Tape & Reel
Tape & Reel Packaging
W = 16.30 max
(0.642 max)
330.2 DIA.
(13.00 DIA.)
1
8
Top Cover
Tape Thickness
Bo = 10.30
(0.406)
0.102 MAX.
(0.004 MAX.)
Top Cover
Tape
K0 = 2.70
(0.106)
P = 12.00
(0.472)
Ao = 10.30
(0.406)
K1 = 2.00
(0.079)
Embossed Carrier
Dimensions
mm
User Direction of Feed
(inches)
Embossment
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-PLA171PH-R02
©Copyright 2010, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
8/10/2010
6
相关型号：
©2020 ICPDF网 联系我们和版权申明