KD10-CA440-2PL3-8DV [JAE]
Board Connector, 3 Contact(s), 1 Row(s), Male, Plug;型号: | KD10-CA440-2PL3-8DV |
厂家: | JAPAN AVIATION ELECTRONICS INDUSTRY, LTD. |
描述: | Board Connector, 3 Contact(s), 1 Row(s), Male, Plug 连接器 |
文件: | 总2页 (文件大小:56K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
KD10 SERIES CONNECTORS
2.0mm (.079") Contact Spacing, Board-to-Multi Coaxial Connectors
• • • • • • • • • • • • • •
The KD10 Series is a small size multi coaxial connector suitable
for middle frequency range. Two versions are available: 50 ohms
and 75 ohms. The 50 ohms is ideally used for digital information
equipment, telecommunication, and calculation equipment, while
75 ohms is used in video movie, radio and multimedia equipment.
GENERAL SPECIFICATIONS
Number of Contacts
1, 3, 5 and 8
Characteristic Impedance 50 ohms/75 ohms
Frequency
VSWR
DC 300 MHz
1.3 max. DC 300 MHz
0.3 dB/DC 300 MHz
250mAmps
Insertion Loss
Current Rating
Dielectric Withstanding
Voltage
250 VAC r.m.s. (for one minute)
FEATURES
Insulation Resistance
Contact Resistance
100 megohms min. (with 10mm cable)
• Low profile 6.1mm (.240") for minimized
mounting space
Initial (Center: 80 megohms max.
Outer 30 megohms max.)
• Characteristic impedance of 50 ohms and
75 ohms
Insertion Force
One pin: 5N max.
Three pins: 10N max.
Five pins: 15N max. Eight pins: 20N max.
Withdrawal Force
One pin: 2N max.
Three pins: 5N max.
• Kinked hold-down allows connector to be fixed on
board during soldering
Five pins: 7N max. Eight pins: 11N max.
Operating Temperature
Insertion/Withdrawal
-55°C to +85°C
50 times
Connector Profile (Ref.)
MATERIALS AND FINISHES
11.5
(.453)
Description
Insulator
Materials/Finishes
Glass-filled (6-6 Nylon)
6.1
(.240)
Center Contact
Outer Contact
Hold-down
Copper alloy, Gold over Nickel Plating
Copper alloy, Gold over Nickel Plating
Copper alloy, Tin Plating
Cable Plug
ORDERING INFORMATION
KD10 – CA ** – 2PL – * *V
Series
Receptacle
KD10 – RRP * – F – 0
Cable Assembly
Cable Length
Series
Termination Right Angle
No. of Contacts
1, 3, 5, 8
Connector Type
Termination Style
Solder
60-800mm – every 20 mm
Longer than 800mm – every 40mm
2 – Both ends harnessed
None – One end harnessed
No. of Contacts
1, 3, 5, 8
Characteristic Impedance
D – 50 ohms
C – 75 ohms
* Cable assemblies only available
Dimensions and specifications subject to change without notice.
KD10 SERIES CONNECTORS
2.0mm (.079") Contact Spacing, Board-to-Multi Coaxial Connectors
PLUG (WITH CABLE)
RECEPTACLE–RIGHT ANGLE
9.6 (.378)
± 0.4 (.016)
B ± 0.4 (.016)
C ± 0.4 (.016)
2 (079)
2 (.079)
± 0.05 (.002)
± 0.8 (.031)
A
10.35 (.408)
± 0.1 (.004)
3.54 (.140)
± 0.1 (.004)
D ± 0.4 (.016)
7.3 (.287)
± 0.4 (.016)
PCB Hole Pattern (Ref.)
Note 1: Plug side contacts are different for 50Ω & 75Ω.
Receptacle side is the same.
Note 2: Applicable Cable
50Ω: 0.8D–QEV
2 (079)
± 0.05 (.002)
E ± 0.1 (.004)
2 (.079)
± 0.05 (.002)
ø0.8 (.031)
± 0.05 (.002)
7.3 (.287)
± 0.1 (.004)
75Ω: 8CV-E41447
ø0.8 (.031)
± 0.05 (.002)
A ± 0.1 (.004)
2-ø2.2 (.087)
± 0.1 (.004)
Part Number
A
B
± 0.4
(± .016)
C
± 0.4
(± .016)
D
E
No. of
Contacts
Plug with Cable
Receptacle
50Ω
75Ω
1
3
5
8
KD10-RRP-F-0
KD10-CA**-*PL-8DV
KD10-CA**-*PL-8CV
5.15 ( .203)
6.7 ( .264)
2.8 ( .110)
3.54 ( .139)
2 ( .079)
KD10-RRP3-F-0 KD10-CA**-*PL3-8DV KD10-CA**-*PL-8CV
13.15 ( .518) 14.7 ( .579) 10.8 ( .425) 11.54 ( .454) 10 ( .393)
KD10-RRP5-F-0 KD10-CA**-*PL5-8DV KD10-CA**-*PL3-8CV 21.15 ( .833) 22.7 ( .894) 18.8 ( .740) 19.54 ( .769) 18 ( .709)
KD10-RRP8-F-0 KD10-CA**-*PL8-8DV KD10-CA**-*PL3-8CV 33.15 (1.310) 34.7 (1.367) 30.8 (1.213) 31.54 (1.242) 30 (1.181)
** (1): Cable assemblies include connector length of 10mm (.039").
If you require 60-800mm (2.36-31.5") cable, you should select cable length every 20mm (.79").
For 840mm (33.1") and above, cable length is every 40mm (1.57").
* (2): Blank–harness on one side, 2–harness will be on both sides.
Dimensions in mm (inches).
相关型号:
©2020 ICPDF网 联系我们和版权申明