21049397 [JDSU]
X5 and Z5 Modulator; X5和Z5调制器型号: | 21049397 |
厂家: | JDSU |
描述: | X5 and Z5 Modulator |
文件: | 总5页 (文件大小:272K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AGILE OPTICAL COMPONENTS
X5 and Z5 Modulator
Key Features
• Small size: 65 x 12 x 5 mm
• Surface mountable with gull wing DC pins
• GPO RF connector
• Integrated PD (photodiode) for bias and power control
• 200 kpsi input fiber for tight bend radii
• High bandwidth FEC and super FEC compatible
• Zero chirp and chirped modulators in a common package
• Operation over C-band and L-band
• Low drive voltage
• Power penalty without FEC:
< 1 dB ( 1200 psꢀnm) for ꢁ5
< 2 dB (1600 psꢀnm) for Z5
Applications
The JDSU Agile Optical Components family includes modulators, switches,
attenuators and tunable filters. These products provide the basis for spectrally
efficient DWDM transmission utilizing dispersion tolerant modulation, channel
monitoring, wavelength switching, remote power control and dynamic channel
selection. They support a wide range of flexible functionalities at lower
operational expenses for the Agile Optical Network. In addition, we have a
complete line of tunable lasers assemblies and sub-assemblies in our Agile
Transmission Module family.
• MSA transponders using tunable or
fixed wavelength sources
• TDM and WDM Metro systems
with up to 120 km reach
• Long Haul (LH) and Ultra Long
Haul (ULH) systems (both
terrestrial and submarine)
• Alternate modulation schemes
including electrical RZ
JDSU X5 and Z5 single drive 10 Gb/s modulators with integrated photodiode are
ideally suited for use in long reach (LR)/ very long reach (VR) Metro applications
as well as in long haul (LH) transmission. The X5 is a fixed zero-chirp solution
and the Z5 is a fixed 0.ꢀ chirp solution, both packaged identically. The small
package form factor makes the X5/Z5 compatible with the 300 pin MSA
transponder footprint.
Compliance
• Telcordia 468
The X5 and Z5 modulators operate over the C and L band. Their low drive
voltages make them compatible with low power dissipating driver solutions such
as GaAs driver technology. In addition to providing bias control feedback, the new
enhanced photodiode is capable of power monitoring for control of the
transmitter’s modulated output power.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
X5 AND Z5 MODULATOR
2
Dimensions Diagram
(Specifications in mm unless otherwise noted.)
.19
( 4.7 )
O
2 PL
.73
( 18.5 )
.002
0.05
3
)
.26
( 6.6 )
.30
( 7.6 )
.23
( 5.8 )
.47
( 12 )
2.45
( 62.2 )
.002
( 65 0.05
)
3.84
( 97.5 )
GPO RF PORT
INPUT
.10
( 2.6 )
.10
( 2.4 )
.192 .004
( 4.86 0.1 )
2X
OUTPUT
1.299
( 33 )
1.181
( 30 )
5 4 3 2
1
.079
( 2 )
2X
.59
( 15 )
200 KPSI FIBER
R
MIN. BEND RADIUS
.309
( 7.84 )
2X
1.000
( 25.4 )
.780
( 19.8 )
DETAIL D
#2-56 UNC-2B .118
4 PL
Pinout
Pin
Description
1
2
3
4
5
RF input
GND
DC bias
PD anode
PD cathode
X5 AND Z5 MODULATOR
3
S21
1
0
-1
-2
-3
-4
-5
-6
0
5
10
15
20
Frequency [ GHz ]
S11
0
-5
-10
-15
-20
-25
-30
0
5
10
15
20
Frequency [ GHz ]
Eye Diagram
(Key feaures: ER >15 dB, jitterp-p <13 ps, measured with optimized driver set-up)
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
-0.1
0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100.0 110.0 120.0 130.0 140.0
Ps
X5 AND Z5 MODULATOR
4
Specifications
Parameter
X5
Z5
0.ꢀ
Chirp (alpha parameter)
Typical
0
Optical insertion loss (BOL)1
Optical return loss (input and output ports)
Optical on/off extinction ratio
Low frequency
Typical
Typical
4.5 dB
40 dB
Typical
Typical
Typical
2ꢀ dB
15 dB
12 GHz
10 dB
PRBS2
E/O bandwidth (-3 dB electrical, linear fit 2 to 15 GHz)
S11 (130 MHz to 10 GHz)
Drive voltage (RF port)3
Typical
Typical
Typical
Typical
Typical
Typical
Typical
Typical
Typical
Typical
Typical
Typical
5.5 V
4 V
4.5 V
2.5 V
Vπ bias port at 40 kHz
Bias voltage range4
-15 to 15 V
40 Ω
1 MΩ
RF port resistance (DC)
Bias port resistance (DC)
Photodetector extinction ratio5
Photodetector O/E bandwidth
Photodetector responsivity (referenced to output power)
Photodetector phase tracking error6
Photodetector dark current (at -5 V, room temperature)
∆R/∆Tꢀ
6 dB
100 kHz
20 mA/W
-5 to 5°
5 nA
0.2 dB
0.3 dB
8
∆R/∆λ
1. Measured at peak of DC bias transmission with no RF input and no optical connectors.
2. For PRBS signals of up to 231-1 and bit rates up to 12.5 Gb/s. Measurement is based on an optimized test set up.
3. Maximum driving voltage required to achieve 15 dB ER for 12.5 Gb/s 231-1 PRBS signal over the operating wavelength and temperature ranges.
4. Maximum voltage range required to maintain optimum bias point over life and temperature.
5. ER = 10*log(Imax/Imin): Imax = PD current with modulator biased to maximum output power, Imin = PD current with modulator biased to minimum output power.
6. Tracking error is the difference in phase between the modulator output power transfer function and the photodetector output current transfer function.
ꢀ. The change in responsivity with temperature can be improved from the values given by employing passive thermal compensation.
8. Over C or L band. This can be calibrated for a given laser frequency.
X5 AND Z5 MODULATOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (53ꢀ8) in North America and +800-53ꢀ8-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: 21049397
Product Code
21049397
21049396
Description
10 Gb/s X5, SC/UPC output connector
10 Gb/s Z5, SC/UPC output connector
Telcordia is a registered trademark of Telcordia Technologies Incorporated.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of
a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase
Corporation. All rights reserved. 21029448 Rev. 006 04/06 X5Z5.DS.CC.AE
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
相关型号:
©2020 ICPDF网 联系我们和版权申明