21105245-001 [JDSU]
10 Gb/s Dual Drive Mach-Zehnder (DDMZ) Modulator; 10 Gb / s的双驱动马赫 - 曾德尔（ DDMZ ）调制器
| 型号： | 21105245-001 |
| 厂家： | 
JDSU |
| 描述： | 10 Gb/s Dual Drive Mach-Zehnder (DDMZ) Modulator |
| 文件： | 总6页 (文件大小：358K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AGILE OPTICAL COMPONENTS
10 Gb/s Dual Drive Mach-Zehnder (DDMZ) Modulator
Key Features
• Low differential drive voltage, typically 2 V
• Matching electro-optic amplitude and phase responses
• Wide optical bandwidth, compatible with full band
tunable lasers
• 12 GHz electro-optic (E/O) bandwidth
• Single-sided electrical I/O
Applications
The JDSU Agile Optical Components family includes modulators, switches,
attenuators and tunable filters. These products provide the basis for spectrally
efficient DWDM transmission utilizing dispersion tolerant modulation, channel
monitoring, wavelength switching, remote power control and dynamic channel
selection. They support a wide range of flexible functionalities at lower
operational expenses for the Agile Optical Network. In addition, we have a
complete line of tunable lasers assemblies and sub-assemblies in our Agile
Transmission Module family.
• Long reach (LR) and very long reach
(VR) metro networks
• Long haul (LH), ultra long haul
(ULH), and submarine optical
transport networks
• Optical field processing for active
dispersion compensation at the
transceiver
• Duo-binary transmission at 40 Gb/s
• Bandwidth grooming
The 10 Gb/s Dual Drive Mach-Zehnder (DDMZ) modulator is ideally suited for
use in long reach (LR) and very long reach (VR) metro network applications as
well as in long haul (LH) transmission systems. DDMZ modulators have been
specifically designed to yield well-behaved and matching electro-optic amplitude
and phase responses over a broad RF frequency range. They are ideally suited for
the processing of the optical field of a transceiver’s laser. This application can be
useful for active dispersion compensation.
Compliance
• Telcordia GR-468
In addition, DDMZ modulators have a wide optical bandwidth. They are compatible
with full band tunable lasers in either C or L band. Their low drive voltages make
them compatible with low power dissipating differential modulator drivers.
For mounting convenience and space efficiency, the DDMZ modulator is packaged
using JDSU’s compact (6-mm high) hermetic packaging technology. For
transceiver integration and mounting efficiency, the entire electrical I/O is located
on one side of the modulator. The RF inputs use GPO-style RF input connectors.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR
2
Dimensions Diagram
(Specifications in mm unless otherwise noted.)
3.450 .002
87.63 0.05
.42
.73
.38
10.54
18.54
9.54
2 PL
.552 .002
14.02 0.05
.19
O
4.72
2 PL
B
.59
.650 .005
.598 .005
R
MIN
2 PL
15
16.51 0.13
15.19 0.13
.22
2 PL
5.66
GPO
.100
2.54
7 PL
2.225
56.52
C
.132 .005
3.35 0.13
GPO
2 PL
INPUT
OUTPUT
.144
3.66
8 PL
.246 .004
6.25 0.1
.14
3.49
2 PL
r
.010
A
.146
3.71
A
2 PL
MOUNTING FOOT
6.14
.25
156.04
6.37
3.255
82.68
DC PIN
MOUNTING AREA
.195
4.95
.097
2.46
.225
5.72
2 PL
.09
2.36
2 PL
.125
3.18
2 PL
10 9 8 7 6 5 4 3
2
1
.018
O
MOUNTING FOOT
0.46
O 900um HYTREL
150mm/125mm HYTREL LENGTH
2 PL
.07
1.87
#4-40 UNC-2B
2 PL
.78
.03
19.74
0.65
DETAIL A
4:1
Pinout
Pin
Description
1
2
3
4
5
6
7
8
9
10
GPO RF port 1
GPO RF port 2
N/A
N/A
N/A
DC bias 2
DC bias 1
GND
N/A
N/A
10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR
3
DDMZ Modulator Bias Circuit Diagram
DDMZ S21 Electro-optic Amplitude
Response Characteristics
10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR
4
DDMZ S21 Electro-optic Phase
Response Characteristics
DDMZ S11 Characteristics
10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR
5
Absolute Maximum/Minimum Ratings
Parameter
Minimum
Maximum
Operating temperature
Storage temperature
RF input power
0 °C
-40 °C
-
-
75 °C
85 °C
24 dBm
16 dBm
Optical input power
Specifications
Parameter
Condition
Minimum
Maximum
Wavelength
1528 nm
2.5 dB
35 dB
-
25 dB
-
-
-
1564 nm
5 dB
-
-10 dB
-
2.6 V
0.2 V
2 V
+15 V
-
1.5 dB
1 dB
0.5 dB
0.4 dB
0.75 dB
8°
Optical insertion loss1
Optical return loss
S11
Input and output ports
130 MHz - 10 GHz
MZ extinction ratio
RF drive voltage2
Δ RF drive voltage
DC Vπ
At 2 GHz
At 2 GHz (difference between RF1 and RF2)
Differential drive
EOL voltage rail
DC bias voltage range3
RF bandwidth
Amplitude ripple
-15 V
12 GHz
Linear fit (2 GHz - 15 GHz)
S21 amplitude difference (300 kHz - 2 GHz) -1.5 dB
S21 amplitude difference (2 GHz - 12 GHz) -1 dB
S21 difference
RF1 to RF2 (300 kHz - 2 GHz)
RF1 to RF2 (2 GHz - 8 GHz)
RF1 to RF2 (8 GHz - 12 GHz)
Deviation from a least squares fit line
(50 MHz - 12 GHz)
-0.5 dB
-0.4 dB
-0.75 dB
-8°
Δ from linear phase
RF timing skew
-5 ps
5 ps
1. Measured at peak of DC bias transmission with no RF input and no optical connectors.
2. Maximum driving voltage to achieve 15 dB ER for 12.5 Gb/s 231-1 PRBS signal over the operating wavelength and temperature ranges.
3. Maximum voltage range required to maintain optimum bias point over life and temperature.
Mechanical Specifications
Parameter
Specification
RF port connector
Input fiber type
Output fiber type
21105245
GPO connectors
Fujikura PANDA-type single-mode polarization maintaining (PMF) fiber, silica, self mode stripping
SM-28
21084655
Fujikura PANDA-type single-mode polarization-maintaining (PMF) fiber, silica, self mode stripping
900 µm diameter loose tube Hytrel over buffered fiber
Telcordia GR-468
Cabling
Qualification standard
Qualification document references
10 GB/S DUAL DRIVE MACH-ZEHNDER (DDMZ) MODULATOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: 21105245-001
-
Code
Modulator
Code
001
005
007
010
Connectors1
No optical connectors
FC/PC input and output optical connectors
SC/UPC input and output optical connectors
FC/APC input and output optical connectors
21105245 DDMZ Dual Drive Modulator
with PM input fiber, SM output fiber
21084655 DDMZ Dual Drive Modulator
with PM input fiber, PM output fiber
1. Other connector configurations available upon request
Fujikura SM 15-P-8/125-UV-400 is a trademark of Corning Incorporated.
Hytrel is a registered trademark of E.I. du Pont de Nemours and Company.
LC and ST are registered trademarks of Lucent Technologies.
SMF-28 is a registered trademark of Corning Incorporated.
Telcordia is a registered trademark of Telcordia Technologies Incorporated.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of
a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2007 JDS Uniphase
Corporation. All rights reserved. 30137423 Rev. 002 03/07 DDMZ10G.DS.CC.AE
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
March 2007
相关型号：
©2020 ICPDF网 联系我们和版权申明