2320-0SL [JOHANSON]
Variable Capacitor, Ceramic, 250V, 0.6pF Min, 2.5pF Max, Vertical Adjuster, Surface Mount;型号: | 2320-0SL |
厂家: | JOHANSON TECHNOLOGY INC. |
描述: | Variable Capacitor, Ceramic, 250V, 0.6pF Min, 2.5pF Max, Vertical Adjuster, Surface Mount 电容器 调节器 |
文件: | 总2页 (文件大小:146K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
Cera-Trim Trimmer Capacitors
PROTECTIVE
PROCESS SEAL
COLOR CODED
.180
(4.57)
TEMPERATURE
COEFFICIENT
.025(.635) SQUARE
DRIVE TUNING
Q @ 100 MHz
COLOR CODE
JMC P/N
CAPACITANCE
2320-0
2320-1
2320-2
2320-3
2320-4
0.6 TO 2.5 pF
1.0 TO 5.0 pF
2.5 TO 10 pF
5.0 TO 18 pF
6.5 TO 25 pF
100 ± 200
100 ± 200
> 3000
> 1000
> 1000
> 500
RED
.167
BLACK
BLUE
(4.24)
±
100
200
-450 ± 300
GREEN
AMBER
±
-1100 300
> 300
.030(.762)
(2X)
.092
.086(2.18)
(2.34)
.220
(5.59)
.195(4.95)
Click for Handling Instruction
.020(.508) X 45°
INDICATES
.110
(2.79)
ROTOR TERMINAL
.040(1.02)
.055(1.40)
TERMINAL (2X)
.020 ± .002
(2X)
(.508±.051)
SPECIFICATIONS
Q VS. FREQUENCY
10000
CAPACITY
9000
SEE TABLE
8000
7000
6000
RANGE
250 VDC
WORKING
5000
4000
VOLTAGE
(TEST VOLTAGE 500 VDC)
3000
2000
Q @ 110000 MHz
SEE TABLE
4
INSULATION
RESISTANCE
>> 1100 MMEEGGOOHHMMS
1000
900
800
700
600
TEMPERATURE
CCOOEEFFFFIICCIIEENNTT
SEE TABLE
500
400
TEMPERATURE
RANGE
--5555°°CC TTOO ++112255°°CC
300
200
TORQUE
00..0055 TTOO 11..00 OOZZ.. IINN..
2320-4
2320-1
2320-2
2320-0
MOISTURE
MIL-STD-202,
MMEETTHHOODD 110066
90
80
70
60
RESISTANCE
50
40
SHOCK
110000 gg @@ 66 mmss
30
20
VVIIBBRRAATTIIOONN
1155 gg @@ 1100--22000000 HHzz
2320-3
SSEETTTTIINNGG
DRIFT
< 1%
10
200
400
600
800
1000
1200
1400
1600
1800
CCEERRAAMMIICC DDIIEELLEECCTTRRIICC SSTTRRUUCCTTUURREE
SSOOLLDDEERR FFIINNIISSHH TTEERRMMIINNAALLSS
.025(.635) SQUARE DRIVE TUNING
.180(4.57)
PROTECTIVE
PROCESS SEAL
COLOR CODED
TTEEMMPPEERRAATTUURREE
QQ @@ 110000 MMHHzz
CCOOEEFFFFIICCIIEENNTT
CCOOLLOORR CCOODDEE
JMC P/N
CCAAPPAACCIITTAANNCCEE
.167(4.24)
22332200--00SSLL
22332200--11SSLL
22332200--22SSLL
22332200--33SSLL
22332200--44SSLL
0.6 TO 2.5 pF
1.0 TO 5.0 pF
2.5 TO 10 pF
5.0 TO 18 pF
6.5 TO 25 pF
100 ± 200
> 3000
> 1000
> 1000
> 500
RREEDD
±
BBLLAACCKK
BBLLUUEE
100
200
±
100
-450± 300
-1100± 300
200
GGRREEEENN
AMBER
> 300
.086(2.18)
.092(2.34)
.220
(5.59)
.004
(.102)
.110
.020(.508) X 45°
(2.79)
INDICATES
ROTOR TERMINAL
.040(1.02)
.055(1.40)
TERMINAL (2X)
.045(1.14)
MIN. (2X)
.020 ± .002
(2X)
(.508±0.51)
.240
Dimensions: inches (mm)
(6.10)
Specifications subject to change without notice
Johanson Manufacturing Corp., 301 Rockaway Valley Road, Boonton, NJ 07005, Tel: 973-334-2676 Fax: 973-334-2954
®
Cera-Trim Handling Instruction
Click to Go Back
Storage
®
Cera-Trim capacitor packed in desiccant and should remain in their original packing as long as possible
before soldering. If they have been inadvertently left unprotected, they may be dried by placing Cera-Trim
in an oven at 50° to 85°C (122-185°F) for 1 to 2 hours depending on particular oven type.
®
Soldering
The use of 60-40 solder (SN60-63) is recommended. The use of higher temperature solder is not
recommended.
Hand Soldering: Use a temperature controlled 40 watt iron set @ 500°F maximum. The solder joint
should be made in 3 seconds or less.
Wave Soldering: Recommended preheat is 1 to 2 minutes. Soldering temperature, 220°C for 5 seconds
maximum.
Reflow Soldering: Recommended preheat is 1 to 2 minutes. Soldering temperature, 240°C for 20 seconds
maximum.
Cleaning
®
Cera-Trim capacitors are compatible with a wide variety of cleaning processes including those that utilize
aqueous or semi-aqueous cleaning solutions, alcohol solutions, de-ionized water and numerous other
cleaners. However, due to the large variety of such processes, the customer through cleaning process
evaluation in conjunction with Johanson product purchased must determine actual compatibility. Cera-
®
Trim capacitor with process seal over the tuning access hole can be cleaned in very aggressive systems. It
is possible to clean these sealed trimmers by suspension in vapor or total immersion in liquid ultrasonic
systems containing the cleaning solutions listed above.
Adjusting
®
The process seal on the Cera-Trim capacitor must be penetrated by the appropriate Johanson tuning tool
after assembly. The penetration renders the seal no longer effective.
The tuning torque range is specified for each type of capacitor. The maximum specified value should not be
exceeded or damage to the capacitor may result.
Always use the recommended tuning tool. Johanson tuning tools are designed specifically for tuning
Johanson products; use of other tools, particularly metal screwdrivers, could damage the tuning mechanism
rendering the capacitor un-tunable.
Johanson Manufacturing Corp., 301 Rockaway Valley Road, Boonton, NJ 07005, Tel: 973-334-2676 Fax: 973-334-2954
相关型号:
2320-0SLR1
Variable Capacitor, Ceramic, 250V, 0.6pF Min, 2.5pF Max, Vertical Adjuster, Surface Mount
JOHANSON
2320-0SLR2
Variable Capacitor, Ceramic, 250V, 0.6pF Min, 2.5pF Max, Vertical Adjuster, Surface Mount
JOHANSON
2320-1
Variable Capacitor, Ceramic, 250V, 1pF Min, 5pF Max, Vertical Adjuster, Surface Mount
JOHANSON
©2020 ICPDF网 联系我们和版权申明