B76004F6876M040 [KEMET]

Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 4V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917, CHIP, ROHS COMPLIANT;


型号：	B76004F6876M040
厂家：	KEMET CORPORATION
描述：	Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 4V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917, CHIP, ROHS COMPLIANT 电容器
文件：	总6页 (文件大小：388K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Polymer Chip Capacitors

TOPcap - Basic

Ordering code:

B76004F687*M040

Substitute for:

B45296R0687M60*

Date:

June 2005

information contained therein without EPCOS' prior express consent is prohibited.

Polymer chip capacitors

TOPcap - Basic

B76004F687*M040

Features

Ultra-low ESR

High permissible ripple current

Only 20% derating necessary

Operating temperature ꢀ55 … +105 °C

No ignition failure mode

Lead-free and material content compatible

with RoHS and SGS

Suitable for lead-free soldering

Taped and reeled to IEC 60286-3

Technical data and ordering code

Ordering code

Rated capacitance

Rated voltage

(tinned terminals)

B76004F687*M040

470

(20 °C, 120 Hz)

C_R

V_R

µF

(up to 85 °C)

(up to 105 °C)

3.2

VDC

Capacitance tolerance

∆C_R

±20

Operating temperature range

Maximum leakage current

T_op

ꢀ55 ... +105

°C

µA

(20 °C, V_R, 5 min) I_leak,max272

DF_max10

Maximum dissipation factor (20 °C, 120 Hz)

Maximum equivalent series (20 °C, 100 kHz) ESR_max40

mΩ

resistance

Maximum ripple current

(20 °C, 100 kHz) I_AC,max

(85 °C, 100 kHz)

(105 °C, 100 kHz)

2.0

1.8

0.8

Case size

EIA/IECQ

Dimensions

7343-40

(L x W x H)

7.3 ±0.3 x 4.3 ±0.3 x 3.8 ±0.2 mm

(0.287 ±0.012 x 0.169 ±0.012 (inch)

x 0.150 ±0.008)

Failure rate

(1 fit = 1ꢁ10^-9failures/h)

(at 40 °C; ≤ V_R,

R_S≤ 0.1 Ω/V)

≤264

fit

Service life

>500000

MSL 3

Moisture level

* = Code number for reel diameter

6 = 330-mm reel

9 = 180-mm reel

Please read Cautions and warnings and

Important notes at the end of this document.

Page 2 of 6

Polymer chip capacitors

TOPcap - Basic

B76004F687*M040

Ordering code structure

B76

337

025

TOPcap family

Series

0 = Basic

1 = 125 °C

3 = Multiple Anode

Rated voltage

02 = 2.5 V, 04 = 4 V, 06 = 6.3 V, 10 = 10 V,

16 = 16 V, 20 = 20 V, 25 = 25 V

Case size

B, D, E, F, V, X

Rated capacitance + exponent

C [pF] ꢁ 10^x

686 = 68 pF ꢁ 10⁶= 68 µF, 157 = 15 pF ꢁ 10⁷= 150 µF, 108 = 10 pF ꢁ 10⁸= 1000

µF

Reel diameter

9 = 180 mm, 6 = 330 mm

Capacitance tolerance

M = ±20%

ESR value

E.g.: 009 = 9 mΩ, 018 = 18 mΩ, 045 = 45 mΩ

Please read Cautions and warnings and

Important notes at the end of this document.

Page 3 of 6

Polymer chip capacitors

TOPcap - Basic

B76004F687*M040

Infrared reflow soldering, hot air reflow soldering (lead-free solders alloys)

Temperature curve at component terminal in infrared and hot air soldering

Other profiles and peak temperatures upon request.

Storage conditions

EPCOS polymer capacitors are shipped in moisture barrier bags together with a desiccant and a

moisture indicator card.

All series (B760, B761, B763) are classified according JEDEC J-STD-020C as MSL 3 (Moisture

Sensitivity Level 3). Parts should be mounted 168 hours (= 7 days) after opening the moisture

barrier bags to prevent absorption of moisture and outgassing effects during soldering. Following

rules should be adhered to:

Parts must be stored in the reel and sealed moisture barrier bag until usage.

Parts should not be stored at high temperature, high humidity, corrosive atmospheres and

exposed to direct sun light. To enable the floor life of 168 hours according JEDEC a maximum

temperature of 30°C at a humidity of maximum 60% R.H. is required.

Temperature fluctuation should be minimized.

Please read Cautions and warnings and

Important notes at the end of this document.

Page 4 of 6

Polymer chip capacitors

TOPcap - Basic

B76004F687*M040

Derating recommendations

Max. permissible continuous voltage (operating

voltage) versus temperature

Environmental comments and warnings

As a manufacturer of passive components, we develop our products on the basis of the relevant

standards and laws, and thus ensure that our products are free of those materials and

substances prohibited by the relevant legislation.

To ensure a standardized procedure for EPCOS worldwide, a binding list of materials and

substances is included in our environment management system to ISO 14001. Our planning and

development guidelines include regulations and directives aiming to promote recognition of

environmental aspects and to optimize products and processes in terms of material use and

environmental compatibility, to design them with a sparing use of resources and to replace

hazardous substances as far as possible.

The environmental officer provides support in assessing the environmental risks of a

development project upon request. Consideration of environmental aspects is checked and

recorded at the design reviews.

EPCOS polymer chip capacitors are RoHS compliant.

Please read Cautions and warnings and

Important notes at the end of this document.

Page 5 of 6

Important Notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical re-

quirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether an EPCOS product with the properties de-

scribed in the product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic compon-

ents or failure before the end of their usual service life cannot be completely ruled out

in the current state of the art, even if they are operated as specified. In customer applica-

tions requiring a very high level of operational safety and especially in customer applications

in which the malfunction or failure of a passive electronic component could endanger human

life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured

by means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by

third parties in the event of malfunction or failure of a passive electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as “hazardous”). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an or-

der.

We also reserve the right to discontinue production and delivery of products. Con-

sequently, we cannot guarantee that all products named in this publication will always be

available.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the “General Terms of Delivery for Products and Services in the Electrical In-

dustry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SilverCap, SIFI, SIMID,

SIKOREL, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or

pending in Europe and in other countries. Further information will be found on the Internet at

www.epcos.com/trademarks.

Page 6 of 6

B76004F6876M040 [KEMET]

相关型号：

B76004F6879M040

B76004V2276M012

B76004V2276M015

B76004V2276M018

B76004V2276M025

B76004V2276M035

B76004V2276M040

B76004V2276M045

B76004V2279M012

B76004V2279M015

B76004V2279M018

B76004V2279M025