C052C683M5R5CA7200 [KEMET]
Ceramic Capacitor, Multilayer, Ceramic, 50V, 20% +Tol, 20% -Tol, X7R, 15% TC, 0.068uF, Through Hole Mount, RADIAL LEADED;![C052C683M5R5CA7200](http://pdffile.icpdf.com/pdf2/p00247/img/icpdf/C052C473M5R5_1497265_icpdf.jpg)
型号: | C052C683M5R5CA7200 |
厂家: | ![]() |
描述: | Ceramic Capacitor, Multilayer, Ceramic, 50V, 20% +Tol, 20% -Tol, X7R, 15% TC, 0.068uF, Through Hole Mount, RADIAL LEADED 电容器 |
文件: | 总16页 (文件大小:1413K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MULTILAYER CERAMIC CAPACITORS/AXIAL
& RADIAL LEADED
Multilayer ceramic capacitors are available in a
edges of the laminated structure. The entire structure is
fired at high temperature to produce a monolithic
block which provides high capacitance values in a
small physical volume. After firing, conductive
terminations are applied to opposite ends of the chip to
make contact with the exposed electrodes.
Termination materials and methods vary depending on
the intended use.
variety of physical sizes and configurations, including
leaded devices and surface mounted chips. Leaded
styles include molded and conformally coated parts
with axial and radial leads. However, the basic
capacitor element is similar for all styles. It is called a
chip and consists of formulated dielectric materials
which have been cast into thin layers, interspersed
with metal electrodes alternately exposed on opposite
TEMPERATURE CHARACTERISTICS
Ceramic dielectric materials can be formulated with
a wide range of characteristics. The EIA standard for
ceramic dielectric capacitors (RS-198) divides ceramic
dielectrics into the following classes:
Class III: General purpose capacitors, suitable
for by-pass coupling or other applications in which
dielectric losses, high insulation resistance and
stability of capacitance characteristics are of little or
no importance. Class III capacitors are similar to Class
II capacitors except for temperature characteristics,
Class I: Temperature compensating capacitors,
suitable for resonant circuit application or other appli-
cations where high Q and stability of capacitance char-
acteristics are required. Class I capacitors have
predictable temperature coefficients and are not
affected by voltage, frequency or time. They are made
from materials which are not ferro-electric, yielding
superior stability but low volumetric efficiency. Class I
capacitors are the most stable type available, but have
the lowest volumetric efficiency.
which are greater than
15%. Class III capacitors
have the highest volumetric efficiency and poorest
stability of any type.
KEMET leaded ceramic capacitors are offered in
the three most popular temperature characteristics:
C0G: Class I, with a temperature coefficient of 0
30 ppm per degree C over an operating
temperature range of - 55°C to + 125°C (Also
known as “NP0”).
Class II: Stable capacitors, suitable for bypass
or coupling applications or frequency discriminating
circuits where Q and stability of capacitance char-
acteristics are not of major importance. Class II
capacitors have temperature characteristics of 15%
or less. They are made from materials which are
ferro-electric, yielding higher volumetric efficiency but
less stability. Class II capacitors are affected by
temperature, voltage, frequency and time.
X7R: Class II, with a maximum capacitance
change of 15% over an operating temperature
range of - 55°C to + 125°C.
Z5U: Class III, with a maximum capacitance
change of + 22% - 56% over an operating tem-
perature range of + 10°C to + 85°C.
Specified electrical limits for these three temperature
characteristics are shown in Table 1.
SPECIFIED ELECTRICAL LIMITS
Temperature Characteristics
X7R
Parameter
C0G
Z5U
Dissipation Factor: Measured at following conditions.
C0G – 1 kHz and 1 vrms if capacitance >1000pF
1 MHz and 1 vrms if capacitance 1000 pF
X7R – 1 kHz and 1 vrms* or if extended cap range 0.5 vrms
Z5U – 1 kHz and 0.5 vrms
2.5%
(3.5% @ 25V)
0.10%
4.0%
Dielectric Stength: 2.5 times rated DC voltage.
Pass Subsequent IR Test
1,000 M
or 100 G
F
1,000 M
or 100 G
F
1,000 M
or 10 G
F
Insulation Resistance (IR): At rated DC voltage,
whichever of the two is smaller
Temperature Characteristics: Range, °C
Capacitance Change without
DC voltage
-55 to +125
30 ppm/°C
-55 to +125
15%
+ 10 to +85
+22%,-56%
0
* MHz and 1 vrms if capacitance 100 pF on military product.
Table I
4
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
APPLICATION NOTES FOR MULTILAYER
CERAMIC CAPACITORS
The variation of a capacitor’s impedance with frequency
determines its effectiveness in many applications.
ELECTRICAL CHARACTERISTICS
The fundamental electrical properties of multilayer
ceramic capacitors are as follows:
Dissipation Factor: Dissipation Factor (DF) is a mea-
sure of the losses in a capacitor under AC application. It is the
ratio of the equivalent series resistance to the capacitive reac-
tance, and is usually expressed in percent. It is usually mea-
sured simultaneously with capacitance, and under the same
conditions. The vector diagram in Figure 2 illustrates the rela-
tionship between DF, ESR, and impedance. The reciprocal of
the dissipation factor is called the “Q”, or quality factor. For
convenience, the “Q” factor is often used for very low values
of dissipation factor. DF is sometimes called the “loss tangent”
or “tangent ␦”, as derived from this diagram.
Polarity: Multilayer ceramic capacitors are not polar,
and may be used with DC voltage applied in either direction.
Rated Voltage: This term refers to the maximum con-
tinuous DC working voltage permissible across the entire
operating temperature range. Multilayer ceramic capacitors
are not extremely sensitive to voltage, and brief applications
of voltage above rated will not result in immediate failure.
However, reliability will be reduced by exposure to sustained
voltages above rated.
Capacitance: The standard unit of capacitance is the
farad. For practical capacitors, it is usually expressed in
ESR
Figure 2
-6
-9
microfarads (10 farad), nanofarads (10 farad), or picofarads
-12
(10 farad). Standard measurement conditions are as
O
ESR
follows:
DF =
X
c
Class I (up to 1,000 pF):
1MHz and 1.2 VRMS
maximum.
δ
X
Ζ
c
Class I (over 1,000 pF):
1kHz and 1.2 VRMS
maximum.
1
2πfC
=
X
Class II:
Class III:
1 kHz and 1.0 0.2 VRMS.
1 kHz and 0.5 0.1 VRMS.
c
Like all other practical capacitors, multilayer ceramic
capacitors also have resistance and inductance. A simplified
schematic for the equivalent circuit is shown in Figure 1.
Other significant electrical characteristics resulting from
these additional properties are as follows:
Insulation Resistance: Insulation Resistance (IR) is the
DC resistance measured across the terminals of a capacitor,
represented by the parallel resistance (Rp) shown in Figure 1.
For a given dielectric type, electrode area increases with
capacitance, resulting in a decrease in the insulation resis-
tance. Consequently, insulation resistance is usually specified
as the “RC” (IR x C) product, in terms of ohm-farads or
megohm-microfarads. The insulation resistance for a specific
capacitance value is determined by dividing this product by
the capacitance. However, as the nominal capacitance values
become small, the insulation resistance calculated from the
RC product reaches values which are impractical.
Consequently, IR specifications usually include both a mini-
mum RC product and a maximum limit on the IR calculated
from that value. For example, a typical IR specification might
read “1,000 megohm-microfarads or 100 gigohms, whichever
is less.”
R
Figure 1
P
R
L
S
C
C = Capacitance
L = Inductance
R
R
= Equivalent Series Resistance (ESR)
= Insulation Resistance (IR)
S
P
Impedance: Since the parallel resistance (Rp) is nor-
mally very high, the total impedance of the capacitor is:
Insulation Resistance is the measure of a capacitor to
resist the flow of DC leakage current. It is sometimes referred
to as “leakage resistance.” The DC leakage current may be
calculated by dividing the applied voltage by the insulation
resistance (Ohm’s Law).
2
RS + (XC - XL)2
Z =
Dielectric Withstanding Voltage: Dielectric withstand-
ing voltage (DWV) is the peak voltage which a capacitor is
designed to withstand for short periods of time without dam-
age. All KEMET multilayer ceramic capacitors will withstand a
test voltage of 2.5 x the rated voltage for 60 seconds.
Where Z =Total Impedance
RS = Equivalent Series Resistance
1
XC = Capacitive Reactance =
2πfC
KEMET specification limits for these characteristics at
standard measurement conditions are shown in Table 1 on
page 4. Variations in these properties caused by changing
conditions of temperature, voltage, frequency, and time are
covered in the following sections.
XL = Inductive Reactance = 2πfL
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
5
APPLICATION NOTES FOR MULTILAYER
CERAMIC CAPACITORS
TABLE 1
EIA TEMPERATURE CHARACTERISTIC CODES
FOR CLASS I DIELECTRICS
Significant Figure
of Temperature
Coefficient
Multiplier Applied
to Temperature
Coefficient
Tolerance of
Temperature
Coefficient *
PPM per
Degree C
Letter
Symbol
Multi-
plier
Number
Symbol
PPM per
Degree C
Letter
Symbol
0.0
0.3
0.9
1.0
1.5
2.2
3.3
4.7
7.5
C
B
A
M
P
R
S
T
-1
-10
-100
-1000
-100000
+1
0
1
2
3
4
5
6
7
8
9
30
60
G
H
J
K
L
120
250
500
1000
2500
M
N
+10
+100
+1000
+10000
U
* These symetrical tolerances apply to a two-point measurement of
temperature coefficient: one at 25°C and one at 85°C. Some deviation
is permitted at lower temperatures. For example, the PPM tolerance
for C0G at -55°C is +30 / -72 PPM.
TABLE 2
EIA TEMPERATURE CHARACTERISTIC CODES
FOR CLASS II & III DIELECTRICS
Low Temperature
Rating
High Temperature Maximum Capacitance
Rating Shift
Degree
Celcius
Letter
Symbol Celcius
Degree
Number
Symbol
Letter
Symbol
Percent
+10C
-30C
-55C
Z
Y
X
+45C
+65C
+85C
+105C
+125C
+150C
+200C
2
4
5
6
7
8
9
1.0%
1.5%
2.2%
3.3%
4.7%
7.5%
10.0%
15.0%
22.0%
A
B
C
D
E
F
P
R
S
T
+10
+20
+30
+40
+50
+60
+70
+80
+22/-33%
+22/-56%
+22/-82%
U
V
6
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
APPLICATION NOTES FOR MULTILAYER
CERAMIC CAPACITORS
At higher AC voltages, both capacitance and dissipation factor
begin to decrease.
Typical curves showing the effect of applied AC and DC
voltage are shown in Figure 6 for KEMET X7R capacitors and
Figure 7 for KEMET Z5U capacitors.
Effect of Frequency: Frequency affects both capaci-
tance and dissipation factor. Typical curves for KEMET multi-
layer ceramic capacitors are shown in Figures 8 and 9.
T
he variation of impedance with frequency is an impor-
tant consideration in the application of multilayer ceramic
capacitors. Total impedance of the capacitor is the vector of the
capacitive reactance, the inductive reactance, and the ESR, as
illustrated in Figure 2. As frequency increases, the capacitive
reactance decreases. However, the series inductance (L)
shown in Figure 1 produces inductive reactance, which
increases with frequency. At some frequency, the impedance
ceases to be capacitive and becomes inductive. This point, at
the bottom of the V-shaped impedance versus frequency
curves, is the self-resonant frequency. At the self-resonant fre-
quency, the reactance is zero, and the impedance consists of
the ESR only.
Typical impedance versus frequency curves for KEMET
multilayer ceramic capacitors are shown in Figures 10, 11, and
12. These curves apply to KEMET capacitors in chip form, with-
out leads. Lead configuration and lead length have a significant
impact on the series inductance. The lead inductance is
approximately 10nH/inch, which is large compared to the
inductance of the chip. The effect of this additional inductance
is a decrease in the self-resonant frequency, and an increase
in impedance in the inductive region above the self-resonant
frequency.
Effect of Time: The capacitance of Class II and III
dielectrics change with time as well as with temperature, volt-
age and frequency. This change with time is known as “aging.”
It is caused by gradual realignment of the crystalline structure
of the ceramic dielectric material as it is cooled below its Curie
temperature, which produces a loss of capacitance with time.
The aging process is predictable and follows a logarithmic
decay. Typical aging rates for C0G, X7R, and Z5U dielectrics
are as follows:
C0G
X7R
Z5U
None
2.0% per decade of time
5.0% per decade of time
Typical aging curves for X7R and Z5U dielectrics are
shown in Figure 13.
Effect of Temperature: Both capacitance and dissipa-
tion factor are affected by variations in temperature. The max-
imum capacitance change with temperature is defined by the
temperature characteristic. However, this only defines a “box”
bounded by the upper and lower operating temperatures and
the minimum and maximum capacitance values. Within this
“box”, the variation with temperature depends upon the spe-
cific dielectric formulation. Typical curves for KEMET capaci-
tors are shown in Figures 3, 4, and 5. These figures also
include the typical change in dissipation factor for KEMET
capacitors.
The aging process is reversible. If the capacitor is heat-
ed to a temperature above its Curie point for some period of
time, de-aging will occur and the capacitor will regain the
capacitance lost during the aging process. The amount of de-
aging depends on both the elevated temperature and the
length of time at that temperature. Exposure to 150°C for one-
half hour or 125°C for two hours is usually sufficient to return
the capacitor to its initial value.
Because the capacitance changes rapidly immediately
after de-aging, capacitance measurements are usually delayed
for at least 10 hours after the de-aging process, which is often
referred to as the “last heat.” In addition, manufacturers utilize
the aging rates to set factory test limits which will bring the
capacitance within the specified tolerance at some future time,
to allow for customer receipt and use. Typically, the test limits
are adjusted so that the capacitance will be within the specified
tolerance after either 1,000 hours or 100 days, depending on
the manufacturer and the product type.
Insulation resistance decreases with temperature.
Typically, the insulation resistance at maximum rated temper-
ature is 10% of the 25°C value.
Effect of Voltage: Class I ceramic capacitors are not
affected by variations in applied AC or DC voltages. For Class
II and III ceramic capacitors, variations in voltage affect only
the capacitance and dissipation factor. The application of DC
voltage higher than 5 vdc reduces both the capacitance and
dissipation factor. The application of AC voltages up to 10-20
Vac tends to increase both capacitance and dissipation factor.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
7
APPLICATION NOTES FOR MULTILAYER
CERAMIC CAPACITORS
capacitors may be operated with AC voltage applied without
need for DC bias.
POWER DISSIPATION
Power dissipation has been empirically determined for
two representative KEMET series: C052 and C062. Power dis-
sipation capability for various mounting configurations is shown
in Table 3. This table was extracted from Engineering Bulletin
F-2013, which provides a more detailed treatment of this sub-
ject.
Note that no significant difference was detected between
the two sizes in spite of a 2 to 1 surface area ratio. Due to the
materials used in the construction of multilayer ceramic capac-
itors, the power dissipation capability does not depend greatly
on the surface area of the capacitor body, but rather on how
well heat is conducted out of the capacitor lead wires.
Consequently, this power dissipation capability is applicable to
other leaded multilayer styles and sizes.
RELIABILITY
A well constructed multilayer ceramic capacitor is
extremely reliable and, for all practical purposes, has an infi-
nite life span when used within the maximum voltage and
temperature ratings. Capacitor failure may be induced by sus-
tained operation at voltages that exceed the rated DC voltage,
voltage spikes or transients that exceed the dielectric with-
standing voltage, sustained operation at temperatures above
the maximum rated temperature, or the excessive tempera-
ture rise due to power dissipation.
Failure rate is usually expressed in terms of percent per
1,000 hours or in FITS (failure per billion hours). Some
KEMET series are qualified under U.S. military established
reliability specifications MIL-PRF-20, MIL-PRF-123, MIL-
PRF-39014, and MIL-PRF-55681. Failure rates as low as
0.001% per 1,000 hours are available for all capacitance /
voltage ratings covered by these specifications. These spec-
ifications and accompanying Qualified Products List should
be consulted for details.
TABLE 3
POWER DISSIPATION CAPABILITY
(Rise in Celsius degrees per Watt)
Power
Dissipation
Mounting Configuration
For series not covered by these military specifications,
an internal testing program is maintained by KEMET Quality
Assurance. Samples from each week’s production are sub-
jected to a 2,000 hour accelerated life test at 2 x rated voltage
and maximum rated temperature. Based on the results of
these tests, the average failure rate for all non-military series
covered by this test program is currently 0.06% per 1,000
hours at maximum rated conditions. The failure rate would be
much lower at typical use conditions. For example, using MIL-
HDBK-217D this failure rate translates to 0.9 FITS at 50%
rated voltage and 50°C.
of C052 & C062
1.00" leadwires attached to binding post
of GR-1615 bridge (excellent heat sink)
90 Celsius degrees
rise per Watt 10%
0.25" leadwires attached to binding post
of GR-1615 bridge
55 Celsius degrees
rise per Watt 10%
Capacitor mounted flush to 0.062" glass-
epoxy circuit board with small copper traces
77 Celsius degrees
rise per Watt 10%
Capacitor mounted flush to 0.062" glass-
epoxy circuit board with four square inches
of copper land area as a heat sink
53 Celsius degrees
rise per Watt 10%
Current failure rate details for specific KEMET multilay-
er ceramic capacitor series are available on request.
As shown in Table 3, the power dissipation capability of
the capacitor is very sensitive to the details of its use environ-
ment. The temperature rise due to power dissipation should not
exceed 20°C. Using that constraint, the maximum permissible
power dissipation may be calculated from the data provided in
Table 3.
It is often convenient to translate power dissipation capa-
bility into a permissible AC voltage rating. Assuming a sinu-
soidal wave form, the RMS “ripple voltage” may be calculated
from the following formula:
MISAPPLICATION
Ceramic capacitors, like any other capacitors, may fail
if they are misapplied. Typical misapplications include expo-
sure to excessive voltage, current or temperature. If the
dielectric layer of the capacitor is damaged by misapplication
the electrical energy of the circuit can be released as heat,
which may damage the circuit board and other components
as well.
If potential for misapplication exists, it is recommended
that precautions be taken to protect personnel and equipment
during initial application of voltage. Commonly used precau-
tions include shielding of personnel and sensing for excessive
power drain during board testing.
PMAX
E = Z x
R
Where E = RMS Ripple Voltage (volts)
P = Power Dissipation (watts)
Z = Impedance
STORAGE AND HANDLING
Ceramic chip capacitors should be stored in normal
working environments. While the chips themselves are quite
robust in other environments, solderability will be degraded
by exposure to high temperatures, high humidity, corrosive
atmospheres, and long term storage. In addition, packaging
materials will be degraded by high temperature – reels may
soften or warp, and tape peel force may increase. KEMET
recommends that maximum storage temperature not exceed
40˚ C, and maximum storage humidity not exceed 70% rela-
tive humidity. In addition, temperature fluctuations should be
minimized to avoid condensation on the parts, and atmos-
pheres should be free of chlorine and sulfur bearing com-
pounds. For optimized solderability, chip stock should be
used promptly, preferably within 1.5 years of receipt.
R = ESR
The data necessary to make this calculation is included in
Engineering Bulletin F-2013. However, the following criteria
must be observed:
1. The temperature rise due to power dissipation
should be limited to 20°C.
2. The peak AC voltage plus the DC voltage must not
exceed the maximum working voltage of the
capacitor.
Provided that these criteria are met, multilayer ceramic
8
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
APPLICATION NOTES FOR MULTILAYER
CERAMIC CAPACITORS
EFFECT OF FREQUENCY
IMPEDANCE VS FREQUENCY
+0.2
+0.1
0
0.20
0.10
0.0
%ΔC
100
-0.1
%DF
10
-0.2
100
1K
10K
100K
1M
10M
0.001µF
1
Figure 8.
Frequency - Hertz
Capacitance & DF vs Frequency - C0G
0.01µF
0.1
0.010.1
1
1
0
100
1000
Frequency - MHz
Figure 10. Impedance vs Frequency
+5
0
10.0
7.5
5.0
2.5
0.0
for C0G Dielectric
%DF
%ΔC
-5
-10
-15
100
100
1K
10K
100K
1M
10M
0.01µF
Figure 9.
Frequency - Hertz
10
Capacitance & DF vs Frequency - X7R & Z5U
0.1µ
F
1
1.0µF
0.1
0.01
0.1
1
1 0
100
1000
Frequency -MHz
Figure 11. Impedance vs Frequency
(hours)
EFFECT OF TIME
for X7R Dielectric
100%
98%
96%
94%
92%
X7R
90%
88%
100
86%
84%
10
Z5U
82%
80%
0.1µF
1
78%
1.0µF
76%
0.1
74%
1
1
0
1
0
0
1
0
0
0
1
0
K
100K
0.01
Figure 13. Typical Aging Rates for X7R & Z5U
0.1
1
1
0
100
1000
Frequency -MHz
Figure 12. Impedance vs Frequency
for Z5U Dielectric
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
9
CERAMIC MOLDED AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS
ELECTRICAL
GENERAL SPECIFICATIONS
Working Voltage:
Capacitance:
Within specified tolerance and when measured with
1 volt rms at 1kHz (1000 pF or less at 1 MHz for C0G).
C0G – 50, 100, 200
X7R – 50, 100, 200
Dissipation Factor @25°C:
25°C at 1kHz (1000 pF or less at 1 MHz for C0G).
C0G – 0.15% maximum
Temperature Characteristics:
C0G 0 30 PPM / °C from -55°C to +125°C
X7R
15% from -55°C to +125°C
X7R – 2.5% maximum
Capacitance Tolerance:
Insulation Resistance:
C0G 0.5pF, 1%, 2%, 5%, 10%, 20%
( 0.5pF is tightest tolerance available)
X7R 10%, 20%, -0 +100%, +80% / -20%
After 2 minutes electrification at 25°C and rated voltage
C0G – 100K M or 1000 M – F, whichever is less.
X7R – 100K M or 1000 M – F, whichever is less.
Construction:
Monolithic block of ceramic dielectric with
Interdigitated internal electrodes, encapsulated
in a molded case, and having axial or radial leads.
Meets flame test requirements of UL Standard 94V-0.
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current limited
to 50 mA at 25°C.
Lead Material:
Axial: Solder coated copper clad steel
Radial: Solder-coated copper standard (100% tin
plated optional)
Solderability:
MIL-STD-202, Method 208, Sn62 solder, 245°C for
5 1/2 seconds.
Terminal Strength:
EIA-198 Method 303, Condition A (2.2 kg)
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
27
CERAMIC MOLDED/AXIAL & RADIAL - STANDARD
CAPACITOR OUTLINE DRAWINGS — (AXIAL LEADS)
1.50 Min.
(38.10)
L
1.50 Min.
(38.10)
D
C
DIMENSIONS — INCHES (MILLIMETERS)
Case
Size
Military
Equivalent Styles
L
D
C
Length
Body diameter
Lead Diameter
CC75, CCR75
CK12, CKR11
C114
C124
C192
C202
C222
.160 ± .010 (4.06 ± .25)
.250 ± .010 (6.35 ± .25)
.390 ± .010 (9.91 ± .25)
.500 ± .020 (12.70 ± .51)
.690 ± .030 (17.53 ± .76)
.090 ± .010 (2.29 ± .25)
.090 ± .010 (2.29 ± .25)
.140 ± .010 (3.56 ± .25)
.250 ± .015 (6.35 ± .38)
.350 ± .020 (8.89 ± .51)
.020, +.000, -.003 (.51, +.00, -.08)
CC76, CCR76
CK13, CKR12
.020, +.000, -.003 (.51, +.00, -.08)
.025, +.004, -.001 (.64, +.10, -.025)
.025, +.004, -.001 (.64, +.10, -.025)
.025, +.004, -.001 (.64, +.10, -.025)
CC77, CCR77
CK14, CKR14
CC78, CCR78
CK15, CKR15
CC79, CCR79
CK16, CKR16
CAPACITOR OUTLINE DRAWINGS — (RADIAL LEADS)
W
L
W
L
C052
C062,
C512,
C522
H
H
Lead Dia.
.025
.045
Max.
Lead Dia.
.025
1.25
Min.
1.25
Min.
(+.004
-.002)
(+.004
-.002)
Center Line of leads
within .030" of Center
Line of case.
S
S
DIMENSIONS — INCHES (MILLIMETERS)
S
Case
Size
Military
Equivalent Styles
H
L
W
Width
Lead
Height
Length
Spacing
CC05, CCR05
CK05, CKR05
C052
C062
.190 .010 ꢀ(.ꢁ8 .25ꢂ
.290 .010 ꢀꢃ.8ꢃ .25ꢂ
.190 .010 ꢀ(.ꢁ8 .25ꢂ
.290 .010 ꢀꢃ.8ꢃ .25ꢂ
.090 .010 ꢀ2.29 .25ꢂ
.090 .010 ꢀ2.29 .25ꢂ
.200 .015 ꢀ5.0ꢁ .8ꢁꢂ
.200 .015 ꢀ5.0ꢁ .8ꢁꢂ
CC06, CCR06
CK06, CKR06
C512
C522
CC0ꢃ, CCR0ꢃ
CC0ꢁ, CCR0ꢁ
.(ꢁ0 .020 ꢀ12.19 .51ꢂ .(ꢁ0 .020 ꢀ12.19 .51ꢂ .1(0 .010 ꢀ8.56 .25ꢂ .(00 .020 ꢀ10.16 .51ꢂ
.(ꢁ0 .020 ꢀ12.19 .51ꢂ .(ꢁ0 .020 ꢀ12.19 .51ꢂ .2(0 .010 ꢀ6.10 .25ꢂ .(00 .020 ꢀ10.16 .51ꢂ
For packaging information, see pages 46, 47 and 48.
28
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC MOLDED/AXIAL & RADIAL - STANDARD
ORDERING INFORMATION
C 052 C 102 K
2
R
5
T
A
FAILURE RATE
CERAMIC
CASE SIZE
A – Not Applicable
LEAD MATERIAL
See Table Below
C – 60/(0 Tin/Lead ꢀSnPbꢂ
T – 100ꢄ Tin ꢀSnꢂꢀC052,
C062 onlyꢂ
SPECIFICATION
C – Standard
CAPACITANCE PICOFARAD CODE
Expressed in picofarads ꢀpFꢂ. First two digits represent
significant figures. Third digit specifies number of zeros
following except 9 indicates division by 10ꢂ. Examples:
0.1 µF = 100,000 pF = 10( and 9.1 pF = 919. See
tables for standard values.
INTERNAL CONSTRUCTION
5 – Multilayer
TEMPERATURE CHARACTERISTIC
Cap. Change with Temp.
KEMET
Designator Equivalent
EIA
Measured
without DC
Bias Voltage
Temp
Range, °C
CAPACITANCE TOLERANCE
Standard
M – 20ꢄ
K – 10ꢄ
J – 5ꢄ
Others
G
C0G
ꢀNP0ꢂ
-55 to
+125°
80
ppm/°C
H – 8ꢄ
G – 2ꢄ
F – 1ꢄ
D – .5pF
ꢀUltra Stableꢂ
R
-55° to
+125
XꢃR
15ꢄ
ꢀStableꢂ
WORKING VOLTAGE (DC)
2 – 200V; 1 – 100V; 5 – 50V
Standard tolerances for each Series
are shown in the repetitive parts lists.
Case Sizes
Radial
C052
C062
C512
C522
Axial
C11(
C12(
C192
C202
C222
Part Number Example: C052C102K2R5TA ꢀ1( digits – no spacesꢂ
AXIAL CAPACITOR MARKING
STANDARD C114C, C124C, C192C, C202C & C222C
KEMET, Temperature Characteristic
Capacitance, Capacitance Tolerance
Voltage
KC0G
101J
200V
0812
Date Code
RADIAL CAPACITOR MARKING
C052C & C062C STANDARD MARKING
BACK
FRONT
Voltage
KEMET
Style
100V
K
C062
X7R
Temperature Characteristic
0811
Date Code
Capacitance, Capacitance Tolerance
104K
C512 & C522 STANDARD MARKING
KEMET
KEMET
SIZE and Temperature Characteristic
Capacitance, Capacitance Tolerance, Voltage
Date Code
C512X7R
105K 50V
0832
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
29
CERAMIC MOLDED/RADIAL – STANDARD
ULTRA-STABLE TEMPERATURE CHARACTERISTIC—C0G (NP0)
RATINGS & PART NUMBER REFERENCE
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT – C114 STANDARD C0G
200 VOLT – C124 STANDARD C0G
200 VOLT – C202 STANDARD C0G
1.0
1.5
2.2
2.7
3.3
3.9
4.7
5.6
6.8
C114C109(1)2G5CA
C114C159(1)2G5CA
C114C229(1)2G5CA
C114C279(1)2G5CA
C114C339(1)2G5CA
C114C399(1)2G5CA
C114C479(1)2G5CA
C114C569(1)2G5CA
C114C689(1)2G5CA
C114C829(1)2G5CA
C114C100(2)2G5CA
C114C120(2)2G5CA
C114C150(2)2G5CA
C114C180(2)2G5CA
C114C220(2)2G5CA
C114C270(3)2G5CA
C114C330(3)2G5CA
C114C390(3)2G5CA
C114C470(3)2G5CA
C114C560(4)2G5CA
C114C680(4)2G5CA
C114C820(4)2G5CA
C114C101(4)2G5CA
C114C121(4)2G5CA
C114C151(4)2G5CA
C114C181(4)2G5CA
C114C221(4)2G5CA
C114C271(4)2G5CA
C114C331(4)2G5CA
390.0
470.0
560.0
C124C391(4)2G5CA
C124C471(4)2G5CA
C124C561(4)2G5CA
5,600.0
6,800.0
8,200.0
10,000.0
12,000.0
15,000.0
18,000.0
22000.0
C202C562(4)2G5CA
C202C682(4)2G5CA
C202C822(4)2G5CA
C202C103(4)2G5CA
C202C123(4)2G5CA
C202C153(4)2G5CA
C202C183(4)2G5CA
C202C223(4)2G5CA
100 VOLT – C124 STANDARD C0G
820.0
1,000.0
C124C821(4)1G5CA
C124C102(4)1G5CA
200 VOLT – C192 STANDARD C0G
680.0
820.0
C192C681(4)2G5CA
C192C821(4)2G5CA
C192C102(4)2G5CA
C192C122(4)2G5CA
C192C152(4)2G5CA
C192C182(4)2G5CA
C192C222(4)2G5CA
C192C272(4)2G5CA
C114C332(4)2G5CA
C114C392(4)2G5CA
C114C472(4)2G5CA
100 VOLT – C202 STANDARD C0G
8.2
10,000.0
12,000.0
15,000.0
18,000.0
22,000.0
27,000.0
33,000.0
C202C103(4)1G5CA
C202C123(4)1G5CA
C202C153(4)1G5CA
C202C183(4)1G5CA
C202C223(4)1G5CA
C202C273(4)1G5CA
C202C333(4)1G5CA
1,000.0
1,200.0
1,500.0
1,800.0
2,200.0
2,700.0
3,300.0
3,900.0
4,700.0
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
120.0
150.0
180.0
220.0
270.0
330.0
200 VOLT – C222 STANDARD C0G
27,000.0
33,000.0
39,000.0
47,000.0
C222C273(4)2G5CA
C222C333(4)2G5CA
C222C393(4)2G5CA
C222C473(4)2G5CA
100 VOLT – C192 STANDARD C0G
1,200.0
1,500.0
1,800.0
2,200.0
2,700.0
3,300.0
3,900.0
4,700.0
5,600.0
6,800.0
8,200.0
C192C122(4)1G5CA
C192C152(4)1G5CA
C192C182(4)1G5CA
C192C222(4)1G5CA
C192C272(4)1G5CA
C192C332(4)1G5CA
C192C392(4)1G5CA
C192C472(4)1G5CA
C192C562(4)1G5CA
C192C682(4)1G5CA
C192C822(4)1G5CA
100 VOLT – C222 STANDARD C0G
39,000.0
47,000.0
56,000.0
68,000.0
82,000.0
100,000.0
C222C393(4)1G5CA
C222C473(4)1G5CA
C222C563(4)1G5CA
C222C683(4)1G5CA
C222C823(4)1G5CA
C222C104(4)1G5CA
100 VOLT – C114 STANDARD C0G
NOTE 1: Insert proper symbol for capacitance tolerance as
follows:
82.0
100.0
120.0
150.0
180.0
220.0
270.0
330.0
390.0
470.0
560.0
680.0
C114C820(4)1G5CA
C114C101(4)1G5CA
C114C121(4)1G5CA
C114C151(4)1G5CA
C114C181(4)1G5CA
C114C221(4)1G5CA
C114C271(4)1G5CA
C114C331(4)1G5CA
C114C391(4)1G5CA
C114C471(4)1G5CA
C114C561(4)1G5CA
C114C681(4)1G5CA
(1) 1.0 pF to 8.2 pF: D— .5 pF
NOTE 1: Insert proper symbol for capacitance tolerance as
follows:
(2) 10.0 pF to 22 pF: J— 5%, K— 10%
(3) 27.0 pF to 47 pF: G— 2%, J— 5%, K— 10%
(4) 56.0 pF and up: F— 1%,G— 2%, J— 5%, K— 10%
(1) 1.0 pF to 8.2 pF: D— .5 pF
(2) 10.0 pF to 22 pF: J— 5%, K— 10%
(3) 27.0 pF to 47 pF: G— 2%, J— 5%, K— 10%
(4) 56.0 pF and up: F— 1%,G— 2%, J— 5%, K— 10%
NOTE 1: Insert proper symbol for capacitance tolerance as
follows:
(1) 1.0 pF to 8.2 pF: D— .5 pF
(2) 10.0 pF to 22 pF: J— 5%, K— 10%
(3) 27.0 pF to 47 pF: G— 2%, J— 5%, K— 10%
(4) 56.0 pF and up: F— 1%,G— 2%, J— 5%, K— 10%
30
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC MOLDED/RADIAL – STANDARD
ULTRA-STABLE TEMPERATURE CHARACTERISTIC—C0G (NP0)
RATINGS & PART NUMBER REFERENCE
CAPACITANCE
pF
KEMET
PART NUMBER
CAPACITANCE
pF
KEMET
PART NUMBER
200 VOLT – C062 SIZE C0G
200 VOLT – C052 SIZE C0G
3,300.0
3,900.0
4,700.0
5,600.0
6,800.0
8,200.0
10,000.0
C062C332(4)2G5CA
C062C392(4)2G5CA
C062C472(4)2G5CA
C062C562(4)2G5CA
C062C682(4)2G5CA
C062C822(4)2G5CA
C062C103(4)2G5CA
1.0
1.5
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
C052C109(1)2G5CA
C052C159(1)2G5CA
C052C229(1)2G5CA
C052C279(1)2G5CA
C052C339(1)2G5CA
C052C399(1)2G5CA
C052C479(1)2G5CA
C052C569(1)2G5CA
C052C689(1)2G5CA
C052C829(1)2G5CA
C052C100(2)2G5CA
C052C120(2)2G5CA
C052C150(2)2G5CA
C052C180(2)2G5CA
C052C220(2)2G5CA
C052C270(3)2G5CA
C052C330(3)2G5CA
C052C390(3)2G5CA
C052C470(3)2G5CA
C052C560(4)2G5CA
C052C680(4)2G5CA
C052C820(4)2G5CA
C052C101(4)2G5CA
C052C121(4)2G5CA
C052C151(4)2G5CA
C052C181(4)2G5CA
C052C221(4)2G5CA
C052C271(4)2G5CA
C052C331(4)2G5CA
C052C391(4)2G5CA
C052C471(4)2G5CA
C052C561(4)2G5CA
C052C681(4)2G5CA
C052C821(4)2G5CA
C052C102(4)2G5CA
C052C122(4)2G5CA
C052C152(4)2G5CA
C052C182(4)2G5CA
C052C222(4)2G5CA
C052C272(4)2G5CA
100 VOLT – C062 SIZE C0G
5,600.0
6,800.0
8,200.0
10,000.0
12,000.0
15,000.0
18,000.0
22,000.0
C062C562(4)1G5CA
C062C682(4)1G5CA
C062C822(4)1G5CA
C062C103(4)1G5CA
C062C123(4)1G5CA
C062C153(4)1G5CA
C062C183(4)1G5CA
C062C223(4)1G5CA
200 VOLT – C512 SIZE C0G
39.0
47.0
56.0
68.0
12,000.0
15,000.0
18,000.0
22,000.0
27,000.0
33,000.0
39,000.0
47,000.0
56,000.0
68,000.0
C512C123(4)2G5CA
C512C153(4)2G5CA
C512C183(4)2G5CA
C512C223(4)2G5CA
C512C273(4)2G5CA
C512C333(4)2G5CA
C512C393(4)2G5CA
C512C473(4)2G5CA
C512C563(4)2G5CA
C512C683(4)2G5CA
82.0
100.0
120.0
150.0
180.0
220.0
270.0
330.0
390.0
470.0
560.0
680.0
820.0
1,000.0
1,200.0
1,500.0
1,800.0
2,200.0
2,700.0
100 VOLT – C512 SIZE C0G
27,000.0
33,000.0
39,000.0
47,000.0
56,000.0
68,000.0
82,000.0
100,000.0
C512C273(4)1G5CA
C512C333(4)1G5CA
C512C393(4)1G5CA
C512C473(4)1G5CA
C512C563(4)1G5CA
C512C683(4)1G5CA
C512C823(4)1G5CA
C512C104(4)1G5CA
200 VOLT – C522 SIZE C0G
82,000.0
100,000.0
C522C823(4)2G5CA
C522C104(4)2G5CA
100 VOLT – C052 SIZE C0G
100 VOLT – C522 SIZE C0G
390.0
470.0
560.0
680.0
820.0
1,000.0
1,200.0
1,500.0
1,800.0
2,200.0
2,700.0
3,300.0
3,900.0
4,700.0
C052C391(4)1G5CA
120,000.0
150,000.0
180,000.0
C522C124(4)1G5CA
C522C154(4)1G5CA
C522C184(4)1G5CA
C052C471(4)1G5CA
C052C561(4)1G5CA
C052C681(4)1G5CA
C052C821(4)1G5CA
C052C102(4)1G5CA
C052C122(4)1G5CA
C052C152(4)1G5CA
C052C182(4)1G5CA
C052C222(4)1G5CA
C052C272(4)1G5CA
C052C332(4)1G5CA
C052C392(4)1G5CA
C052C472(4)1G5CA
NOTE 1: Insert proper symbol for capacitance tolerance as
follows:
(1) 1.0 pF to 8.2 pF: D— .5 pF
(2) 10.0 pF to 22 pF: J— 5%, K— 10%
(3) 27.0 pF to 47 pF: G— 2%, J— 5%, K— 10%
(4) 56.0 pF and up: F— 1%,G— 2%, J— 5%, K— 10%
NOTE 1: Insert proper symbol for capacitance tolerance as
follows:
(1) 1.0 pF to 8.2 pF: D— .5 pF
(2) 10.0 pF to 22 pF: J— 5%, K— 10%
(3) 27.0 pF to 47 pF: G— 2%, J— 5%, K— 10%
(4) 56.0 pF and up: F— 1%,G— 2%, J— 5%, K— 10%
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
31
CERAMIC MOLDED/RADIAL – STANDARD
STABLE TEMPERATURE CHARACTERISTIC—X7R
RATINGS & PART NUMBER REFERENCE
CAPACI-
TANCE
pF
CAPACI-
TANCE
pF
CAPACI-
TANCE
pF
TOL.
%
KEMET
PART NUMBER
TOL.
%
KEMET
PART NUMBER
TOL.
%
KEMET
PART NUMBER
100 VOLT – C202 SIZE
100 VOLT – C124 SIZE
100 VOLT – C114 SIZE
C114C100K1R5CA
56,000
68,000
68,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C202C563K1R5CA
5,600
6,800
6,800
8,200
10,000
10,000
10
10
20
10
10
20
C124C562K1R5CA
10
10
12
15
15
18
22
22
27
33
33
39
47
47
56
68
68
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
20
10
20
10
10
20
C202C683K1R5CA
C202C683M1R5CA
C202C823K1R5CA
C202C104K1R5CA
C202C104M1R5CA
C202C124K1R5CA
C202C154K1R5CA
C202C154M1R5CA
C202C184K1R5CA
C202C224K1R5CA
C202C224M1R5CA
C202C274K1R5CA
C202C334K1R5CA
C202C334M1R5CA
C124C682K1R5CA
C124C682M1R5CA
C124C822K1R5CA
C124C103K1R5CA
C124C103M1R5CA
C114C100M1R5CA
C114C120K1R5CA
C114C150K1R5CA
C114C150M1R5CA
C114C180K1R5CA
C114C220K1R5CA
C114C220M1R5CA
C114C270K1R5CA
C114C330K1R5CA
C114C330M1R5CA
C114C390K1R5CA
C114C470K1R5CA
C114C470M1R5CA
C114C560K1R5CA
C114C680K1R5CA
C114C680M1R5CA
C114C820K1R5CA
C114C101K1R5CA
C114C101M1R5CA
C114C121K1R5CA
C114C151K1R5CA
C114C151M1R5CA
C114C181K1R5CA
C114C221K1R5CA
C114C221M1R5CA
C114C271K1R5CA
C114C331K1R5CA
C114C331M1R5CA
C114C391K1R5CA
C114C471K1R5CA
C114C471M1R5CA
C114C561K1R5CA
C114C681K1R5CA
C114C681M1R5CA
C114C821K1R5CA
C114C102K1R5CA
C114C102M1R5CA
C114C122K1R5CA
C114C152K1R5CA
C114C152M1R5CA
C114C182K1R5CA
C114C222K1R5CA
C114C222M1R5CA
C114C272K1R5CA
C114C332K1R5CA
C114C332M1R5CA
C114C392K1R5CA
C114C392K1R5CA
C114C472K1R5CA
C114C472M1R5CA
82,000
100,000
100,000
120,000
150,000
150,000
180,000
220,000
220,000
270,000
330,000
330,000
50 VOLT – C124 SIZE
12,000
15,000
15,000
18,000
22,000
22,000
27,000
33,000
33,000
39,000
47,000
47,000
10
10
20
10
10
20
10
10
20
10
10
20
C124C123K5R5CA
C124C153K5R5CA
C124C153M5R5CA
C124C183K5R5CA
C124C223K5R5CA
C124C223M5R5CA
C124C273K5R5CA
C124C333K5R5CA
C124C333M5R5CA
C124C393K5R5CA
C124C473K5R5CA
C124C473M5R5CA
50 VOLT – C202 SIZE
470,000
470,000
680,000
680,000
1,000,000
1,000,000
10
20
10
20
10
20
C202C474K5R5CA
82
C202C474M5R5CA
C202C684K5R5CA
C202C684M5R5CA
C202C105K5R5CA
C202C105M5R5CA
100
100
120
150
150
180
220
220
270
330
330
390
470
470
560
680
680
820
1,000
1,000
1,200
1,500
1,500
1,800
2,200
2,200
2,700
2,700
3,300
3,300
3,900
4,700
4,700
100 VOLT – C192 SIZE
12,000
15,000
15,000
18,000
22,000
22,000
27,000
33,000
33,000
39,000
47,000
47,000
56,000
68,000
68,000
82,000
100,000
100,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C192C123K1R5CA
C192C153K1R5CA
C192C153M1R5CA
C192C183K1R5CA
C192C223K1R5CA
C192C223M1R5CA
C192C273K1R5CA
C192C333K1R5CA
C192C333M1R5CA
C192C393K1R5CA
C192C473K1R5CA
C192C473M1R5CA
C192C563K1R5CA
C192C683K1R5CA
C192C683M1R5CA
C192C823K1R5CA
C192C104K1R5CA
C192C104M1R5CA
100 VOLT – C222 SIZE
470,000
470,000
680,000
680,000
1,000,000
1,000,000
10
20
10
20
10
20
C222C474K1R5CA
C222C474M1R5CA
C222C684K1R5CA
C222C684M1R5CA
C222C105K1R5CA
C222C105M1R5CA
50 VOLT – C222 SIZE
2,200,000
2,200,000
3,300,000
3,300,000
10
20
10
20
C222C225K5R5CA
C222C225M5R5CA
C222C335K5R5CA
C222C335M5R5CA
50 VOLT – C192 SIZE
56,000
68,000
68,000
10
10
20
10
10
20
10
10
20
10
10
20
10
C192C563K5R5CA
C192C683K5R5CA
C192C683M5R5CA
C192C823K5R5CA
C192C104K5R5CA
C192C104M5R5CA
C192C124K5R5CA
C192C154K5R5CA
C192C154M5R5CA
C192C184K5R5CA
C192C224K5R5CA
C192C224M5R5CA
C192C274K5R5CA
82,000
100,000
100,000
120,000
150,000
150,000
180,000
220,000
220,000
270,000
50 VOLT – C114 SIZE
5,600
6,800
6,800
8,200
10,000
10,000
10
10
20
10
10
20
C114C562K5R5CA
C114C682K5R5CA
C114C682M5R5CA
C114C822K5R5CA
C114C103K5R5CA
C114C103M5R5CA
32
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC MOLDED/RADIAL – STANDARD
STABLE TEMPERATURE CHARACTERISTIC—X7R
RATINGS & PART NUMBER REFERENCE
CAPACI-
TANCE
pF
CAPACI-
TANCE
pF
CAPACI-
TANCE
pF
TOL.
%
KEMET
PART NUMBER
TOL.
%
KEMET
PART NUMBER
TOL.
%
KEMET
PART NUMBER
200 VOLT – C052 SIZE
C052C100K2R5CA
100 VOLT – C062 SIZE
100 VOLT – C052 SIZE
C052C122K1R5CA
10
10
12
15
15
18
22
22
27
33
33
39
47
47
56
68
68
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
1,200
1,500
1,500
1,800
2,200
2,200
2,700
3,300
3,300
3,900
4,700
4,700
5,600
6,800
6,800
8,200
10,000
10,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
12,000
15,000
15,000
18,000
22,000
22,000
27,000
33,000
33,000
39,000
47,000
47,000
56,000
68,000
68,000
82,000
100,000
100,000
1,000,000
1,000,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
20
C062C123K1R5CA
C052C100M2R5CA
C052C120K2R5CA
C052C150K2R5CA
C052C150M2R5CA
C052C180K2R5CA
C052C220K2R5CA
C052C220M2R5CA
C052C270K2R5CA
C052C330K2R5CA
C052C330M2R5CA
C052C390K2R5CA
C052C470K2R5CA
C052C470M2R5CA
C052C560K2R5CA
C052C680K2R5CA
C052C680M2R5CA
C052C820K2R5CA
C052C101K2R5CA
C052C101M2R5CA
C052C121K2R5CA
C052C151K2R5CA
C052C151M2R5CA
C052C181K2R5CA
C052C221K2R5CA
C052C221M2R5CA
C052C271K2R5CA
C052C331K2R5CA
C052C331M2R5CA
C052C391K2R5CA
C052C471K2R5CA
C052C471M2R5CA
C052C561K2R5CA
C052C681K2R5CA
C052C681M2R5CA
C052C821K2R5CA
C052C102K2R5CA
C052C102M2R5CA
C062C153K1R5CA
C062C153M1R5CA
C062C183K1R5CA
C062C223K1R5CA
C062C223M1R5CA
C062C273K1R5CA
C062C333K1R5CA
C062C333M1R5CA
C062C393K1R5CA
C062C473K1R5CA
C062C473M1R5CA
C062C563K1R5CA
C062C683K1R5CA
C062C683M1R5CA
C062C823K1R5CA
C062C104K1R5CA
C062C104M1R5CA
C062C105K1R5CA
C062C105M1R5CA
C052C152K1R5CA
C052C152M1R5CA
C052C182K1R5CA
C052C222K1R5CA
C052C222M1R5CA
C052C272K1R5CA
C052C332K1R5CA
C052C332M1R5CA
C052C392K1R5CA
C052C472K1R5CA
C052C472M1R5CA
C052C562K1R5CA
C052C682K1R5CA
C052C682M1R5CA
C052C822K1R5CA
C052C103K1R5CA
C052C103M1R5CA
82
100
100
120
150
150
180
220
220
270
330
330
390
470
470
560
680
680
820
1,000
1,000
50 VOLT – C052 SIZE
C052C123K5R5CA
12,000
15,000
15,000
18,000
22,000
22,000
27,000
33,000
33,000
39,000
47,000
47,000
56,000
68,000
68,000
82,000
100,000
100,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
50 VOLT – C062 SIZE
C052C153K5R5CA
C052C153M5R5CA
C052C183K5R5CA
C052C223K5R5CA
C052C223M5R5CA
C052C273K5R5CA
C052C333K5R5CA
C052C333M5R5CA
C052C393K5R5CA
C052C473K5R5CA
C052C473M5R5CA
C052C563K5R5CA
C052C683K5R5CA
C052C683M5R5CA
C052C823K5R5CA
C052C104K5R5CA
C052C104M5R5CA
120,000
150,000
150,000
180,000
220,000
220,000
270,000
330,000
330,000
390,000
470,000
470,000
560,000
680,000
680,000
820,000
1,000,000
1,000,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
C062C124K5R5CA
C062C154K5R5CA
C062C154M5R5CA
C062C184K5R5CA
C062C224K5R5CA
C062C224M5R5CA
C062C274K5R5CA
C062C334K5R5CA
C062C334M5R5CA
C062C394K5R5CA
C062C474K5R5CA
C062C474M5R5CA
C062C564K5R5CA
C062C684K5R5CA
C062C684M5R5CA
C062C824K5R5CA
C062C105K5R5CA
C062C105M5R5CA
200 VOLT – C062 SIZE
C062C122K2R5CA
1,200
1,500
1,500
1,800
2,200
2,200
2,700
3,300
3,300
3,900
4,700
4,700
5,600
6,800
6,800
8,200
10,000
10,000
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
10
10
20
50 VOLT – C512 SIZE
C062C152K2R5CA
C062C152M2R5CA
C062C182K2R5CA
C062C222K2R5CA
C062C222M2R5CA
C062C272K2R5CA
C062C332K2R5CA
C062C332M2R5CA
C062C392K2R5CA
C062C472K2R5CA
C062C472M2R5CA
C062C562K2R5CA
C062C682K2R5CA
C062C682M2R5CA
C062C822K2R5CA
C062C103K2R5CA
C062C103M2R5CA
1,000,000
1,000,000
1,500,000
1,500,000
2,000,000
2,000,000
2,200,000
2,200,000
10
20
10
20
10
20
10
20
C512C105K5X5CA
C512C105M5X5CA
C512C155K5X5CA
C512C155M5X5CA
C512C205K5X5CA
C512C205M5X5CA
C512C225K5X5CA
C512C225M5X5CA
100 VOLT – C522 SIZE
1,000,000
1,000,000
10
20
C522C105K1X5CA
C522C105M1X5CA
50 VOLT – C522 SIZE
2,700,000
2,700,000
3,300,000
3,300,000
10
20
10
20
C522C275K5X5CA
C522C275M5X5CA
C522C335K5X5CA
C522C335M5X5CA
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
33
CERAMIC LEADED
PACKAGING INFORMATION
Ceramic Axial
Lead Tape and Reel Packaging
KEMET offers standard reeling of Molded and Conformally
Coated Axial Leaded Ceramic Capacitors for automatic insertion
or lead forming machines per EIA specification RS-296. KEMET’s
internal specification four-digit suffix, 7200, is placed at the end of
the part number to designate tape and reel packaging, ie:
C410C104Z5U5CA7200.
Paper (50 lb.) test minimum is inserted between the layers of
capacitors wound on reels for component pitch ≤ 0.400”.
Capacitor lead length may extend only a maximum of .0625”
(1.59mm) beyond the tapes’ edges. Capacitors are centered in a
row between the two tapes and will deviate only
0.031
(0.79mm) from the row center. A minimum of 36” (91.5 cm) leader
tape is provided at each end of the reel capacitors. Universal
splicing clips are used to connect the tape. Standard reel
quantities are shown on page 48.
46
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC LEADED
PACKAGING INFORMATION
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
47
CERAMIC LEADED
PACKAGING INFORMATION
CERAMIC PACKAGING
Standard (1)
Bulk
Quantity
Ammo Pack
Maximum
Reel
Quantity
KEMET
Series
Military
Style
Military
Specification
Reel
Size
Quantity
Maximum
C114C-K-G
C124C-K-G
C192C-K-G
C202C-K
C222C-K
C052C-K-G
C062C-K-G
C114G
C124G
C192G
C202G
C222G
C052/56G
C062/66G
C512G
C522G
C114T
C124T
C192T
C202T
C222T
C052/56T
C062/66T
C31X
C32X
C33X
C340
C350
C410
C412
C420
C430
C440
C512
C522
C617
CK12, CC75
CK13, CC76
CK14, CC77
CK15
MIL-C-11015/
MIL-PRF-20
200/Box
200/Box
100/Box
25/Box
5000
5000
3000
500
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
N/A
N/A
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
CK16
10/Tray
300
CK05, CC05
CK06, CC06
CCR75
CCR76
CCR77
CC78-CCR78
CC79-CCR79
CCR05
100/Bag
100/Bag
200/Box
200/Box
100/Box
25/Box
2000
1500
2000
1500
5000
5000
3000
500
MIL-PRF-20
10/Tray
300
100/Bag
100/Bag
Footnote (2)
Footnote (2)
200/Box
200/Box
100/Box
25/Box
1700
1500
N/A
CCR06
CC07-CCR07
CC08-CCR08
CKR11
CKR12
CKR14
CKR15
CKR16
CKR05
CKR06
N/A
MIL-PRF-39014
5000
5000
3000
500
10/Tray
300
100/Bag
100/Bag
500/Bag
500/Bag
250/Bag
100/Bag
50/Bag
300/Box
200/Box
300/Box
200/Box
200/Box
Footnote (2)
Footnote (2)
250/Bag
100/Bag
100/Bag
100/Bag
50/Bag
1700
1500
2500
2500
1500
1000
500
5000
5000
5000
2500
2500
N/A
N/A
1000
500
500
500
500
500
500
500
2500
2500
1500
1000
N/A
4000
4000
4000
2000
2000
12"
N/A
N/A
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
N/A
N/A
N/A
N/A
C622/C623
C627/C628
C630/C631
C637/C638
C640/C641
C642/C643
C647/C648
C657/C658
C667/C668
50/Bag
50/Bag
50/Bag
50/Bag
500
500
50/Bag
NOTE: (1) Standard packaging refers to number of pieces per bag, tray or vial.
(2) Quantity varies. For further details, please consult the factory.
48
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00247/img/page/C052C473M5R5_1497265_files/C052C473M5R5_1497265_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00247/img/page/C052C473M5R5_1497265_files/C052C473M5R5_1497265_2.jpg)
C052C689D2G5CA7200
Ceramic Capacitor, Multilayer, Ceramic, 200V, 7.35% +Tol, 7.35% -Tol, C0G, 30ppm/Cel TC, 0.0000068uF, Through Hole Mount, RADIAL LEADED
KEMET
![](http://pdffile.icpdf.com/pdf2/p00247/img/page/C052C473M5R5_1497265_files/C052C473M5R5_1497265_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00247/img/page/C052C473M5R5_1497265_files/C052C473M5R5_1497265_2.jpg)
C052C689D2G5TA7200
Ceramic Capacitor, Multilayer, Ceramic, 200V, 7.35% +Tol, 7.35% -Tol, C0G, 30ppm/Cel TC, 0.0000068uF, Through Hole Mount, RADIAL LEADED
KEMET
![](http://pdffile.icpdf.com/pdf2/p00296/img/page/C202C823K1R5_1790222_files/C202C823K1R5_1790222_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00296/img/page/C202C823K1R5_1790222_files/C202C823K1R5_1790222_2.jpg)
C052C689D2G5TA7305
Ceramic Capacitor, Ceramic, 200V, 7.3529% +Tol, 7.3529% -Tol, C0G, -/+30ppm/Cel TC, 0.0000068uF, 1909,
KEMET
©2020 ICPDF网 联系我们和版权申明