C0805X393CBGACAUTO [KEMET]
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 - 3,000 VDC (Automotive Grade);型号: | C0805X393CBGACAUTO |
厂家: | KEMET CORPORATION |
描述: | High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) |
文件: | 总21页 (文件大小:1509K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP),
C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Overview
KEMET’s Automotive Grade High Voltage with Flexible Termination switching power supplies and lighting ballasts. Their exceptional
(HV FT-CAP) surface mount MLCCs in C0G dielectric address the
primary failure mode of MLCCs– flex cracks, which are typically
the result of excessive tensile and shear stresses produced during
board flexure and thermal cycling. Featuring several of the highest
CV (capacitance/voltage) values available in the industry, these
devices utilize a pliable and conductive silver epoxy between the
base metal and nickel barrier layers of the termination system. The
addition of this epoxy layer inhibits the transfer of board stress to
the rigid ceramic body, therefore mitigating flex cracks which can
result in low IR or short circuit failures. Although flexible termination
performance at high frequencies has made high voltage MLCC’s the
preferred dielectric choice of design engineers worldwide. In addition
to their use in power supplies, these capacitors are widely used in
industries related to automotive (hybrid), telecommunications, medical,
military, aerospace, semiconductors and test/diagnostic equipment.
Whether under-hood or in-cabin, these capacitors are designed to
provide reliable performance in mission and safety critical automotive
circuits. Stricter testing protocol and inspection criteria have been
established for automotive grade products in recognition of potentially
technology does not eliminate the potential for mechanical damage harsh environmental conditions. KEMET automotive grade series
that may propagate during extreme environmental and handling
conditions, it does provide superior flex performance over standard
termination systems.
capacitors meet the demanding Automotive Electronics Council’s
AEC-Q200 qualification requirements.
KEMET’s high voltage surface mount MLCCs in C0G dielectric
feature a 125°C maximum operating temperature and offers the most
stable voltage and temperature performance of all ceramic dielectric
materials. C0G (NP0) dielectric capacitors exhibit no change in
capacitance with respect to time and voltage and boasts a negligible
change in capacitance with reference to ambient temperature.
Capacitance change is limited to ±30ppm/ºC from −55°C to +125°C.
These devices exhibit low ESR at high frequencies and find
conventional use as snubbers or filters in applications such as
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
C
2225
X
393
J
C
G
A
C
AUTO
Case Size Specification/
Capacitance
Code (pF)
Capacitance Rated Voltage
Failure Rate/ Termination
Design
Ceramic
Dielectric
G = C0G
Packaging/Grade (C-Spec)
(L" x W")
Series
Tolerance1
(VDC)
Finish2
0805
1206
1210
1808
1812
1825
2220
2225
X= Flexible
Termination
Two significant
digits +
number of zeros.
B = ±0.10 pF C = 500
C = ±0.25 pF B = 630
A = N/A
C = 100%
Matte Sn
See
“Packaging C-Spec
Ordering Options Table”
below
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
D = 1,000
F = 1,500
G = 2,000
Z = 2,500
H = 3,000
1 Additional capacitance tolerance offerings may be available. Contact KEMET for details.
2 Additional termination finish options may be available. Contact KEMET for details.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016
1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Packaging C-Spec Ordering Options Table
Packaging/Grade
Packaging Type1
Ordering Code (C-Spec)3
7" Reel
AUTO
AUTO7411 (EIA 0603 and smaller case sizes)
AUTO7210 (EIA 0805 and larger case sizes)
13" Reel / Unmarked
7" Reel/Unmarked/2 mm pitch2
13" Reel/Unmarked/2 mm pitch2
3190
3191
1 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L” x W”) and thickness dimension. See “Chip Thickness/Tape & Reel Packaging
Quantities” and “Tape & Reel Packaging Information”.
2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size
devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more
information see “Capacitor Marking”.
3 For additional Information regarding “AUTO” C-Spec options, see “Automotive C-Spec Information”.
Benefits
• AEC-Q200 automotive qualified
• Extremely low ESR & ESL
• −55°C to +125°C operating temperature range
• Superior flex performance (up to 5 mm)
• Lead (Pb)-Free, RoHS, and REACH compliant
• EIA 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225
case sizes
• High thermal stability
• High ripple current capability
• Preferred capacitance solution at line frequencies & into the
MHz range
• No capacitance change with respect to applied rated DC voltage
• Negligible capacitance change with respect to temperature from
−55°C to +125°C
• DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV,
2.5 KV and 3 KV
• Capacitance offerings ranging from 1 pF to 39 nF
• Available capacitance tolerances of ±0.10 pF, ±0.25 pF,
±0.5 pF, ±1%, ±2%, ±5%, ±10% and ±20%
• No piezoelectric noise
• No capacitance decay with time
• Non-polar device, minimizing installation concerns
• 100% pure matte tin-plated termination finish allowing for
excellent solderability
Applications
Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubbed circuits, output filters), high
voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling capacitors in Ćuk
converters. Markets include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical
equipment/control, LAN/WAN interface, analog and digital modems, and automotive.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016
2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Automotive C-Spec Information
KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding
test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. These
products are supported by a Product Change Notification (PCN) and Production Part Approval Process warrant (PPAP).
Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec, "AUTO". This
C-Spec was developed in order to better serve small and medium sized companies that prefer an automotive grade component without
the requirement to submit a customer Source Controlled Drawing (SCD) or specification for review by a KEMET engineering specialist.
This C-Spec is therefore not intended for use by KEMET’s OEM Automotive customers and are not granted the same “privileges” as
other automotive C-Specs. Customer PCN approval and PPAP request levels are limited (see details below).
Product Change Notification (PCN)
The KEMET Product Change Notification system is used to communicate primarily the following types of changes:
• Product/process changes that affect product form, fit , function, and /or reliability
• Changes in manufacturing site
• Product obsolescence
Customer Notification due to:
KEMET Automotive
C-Spec
Days prior to
implementation
Process/Product change
Obsolescence*
Yes
KEMET assigned1
Yes (with approval and
sign off)
180 days Minimum
AUTO
Yes (without approval)
Yes
90 days Minimum
1 KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.
Production Part Approval Process (PPAP)
The purpose of the Production Part Approval Process is:
• To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts.
• To provide the evidence that all customer engineering design record and specification requirements are properly understood and
fulfilled by the manufacturing organization.
• To demonstrate that the established manufacturing process has the potential to produce the part
KEMET
Automotive
C-Spec
PPAP (Product Part Approval Process) Level
1
●
○
2
3
●
○
4
5
KEMET
●
●
●
assigned1
AUTO
1 KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.
● Part Number specific PPAP available
○ Product family PPAP only
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016
3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Dimensions – Millimeters (Inches)
L
W
T
B
S
EIA
Size
Code
Metric
Size
Code
S
L
W
Width
T
B
Mounting
Technique
Separation
Minimum
Length
Thickness
Bandwidth
0805
1206
1210
1808
1812
1825
2220
2225
2012
3216
3225
4520
4532
4564
5650
5664
2.00 (.079) ± 0.30 (.012) 1.25 (.049) ± 0.30 (.012)
3.30 (.130) ± 0.40 (.016) 1.60 (.063) ± 0.35 (.013)
3.30 (.130) ± 0.40 (.016) 2.60 (.102) ± 0.30 (.012)
4.70 (.185) ± 0.50 (.020) 2.00 (.079) ± 0.20 (.008)
4.50 (.178) ± 0.40 (.016) 3.20 (.126) ± 0.30 (.012)
4.60 (.181) ± 0.40 (.016) 6.40 (.252) ± 0.40 (.016)
5.90 (.232) ± 0.75 (.030) 5.00 (.197) ± 0.40 (.016)
5.90 (.232) ± 0.75 (.030) 6.40 (.248) ± 0.40 (.016)
0.50 (0.02) ± 0.25 (.010)
0.60 (.024) ± 0.25 (.010)
0.60 (.024) ± 0.25 (.010)
0.70 (.028) ± 0.35 (.014)
0.70 (.028) ± 0.35 (.014)
0.70 (.028) ± 0.35 (.014)
0.70 (.028) ± 0.35 (.014)
0.70 (.028) ± 0.35 (.014)
0.75 (.030)
Solder Wave or
Solder Reflow
See Table 2 for
Thickness
N/A
Solder Reflow Only
Qualification/Certification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test
methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional
information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com.
Environmental Compliance
Lead (Pb)-Free, RoHS, and REACH compliant without exemptions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016
4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range
−55°C to +125°C
±30 ppm/ºC
0%
Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC)
Aging Rate (Maximum % Capacitance Loss/Decade Hour)
150% of rated voltage for voltage rating of < 1,000 V
120% of rated voltage for voltage rating of ≥ 1,000 V
(5 ±1 seconds and charge/discharge not exceeding 50 mA)
1Dielectric Withstanding Voltage (DWV)
2Dissipation Factor (DF) Maximum Limit at 25ºC
3Insulation Resistance (IR) Limit at 25°C
0.1%
1,000 megohm microfarads or 100 GΩ
(500 VDC applied for 120 ±5 seconds at 25°C)
1DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the capacitor.
2Capacitance and dissipation factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 Vrms ±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50 Hz and 1.0 Vrms ±0.2 V if capacitance > 1,000 pF
3To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to “ON.”
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Rated DC
Voltage
Capacitance
Value
Dissipation Factor
(Maximum %)
Capacitance
Shift
Insulation
Resistance
Dielectric
C0G
All
All
0.5
0.3% or ±0.25 pF 10% of Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016
5
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Table 1A – Capacitance Range/Selection Waterfall (0805 – 1808 Case Sizes)
Case Size/Series
C0805X
C1206X
C1210X
C1808X
Voltage Code
C
B
D
C
B
D
F
G
C
B
D
F
G
C
B
D
F
G
Z
H
Capacitance Cap Code
Rated Voltage (VDC)
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
Capacitance Tolerance
1.0 - 9.1 pF*
10 pF
11 pF
12 pF
13 pF
15 pF
16 pF
18 pF
20 pF
22 pF
24 pF
27 pF
30 pF
33 pF
36 pF
39 pF
43 pF
47 pF
51 pF
56 pF
62 pF
68 pF
75 pF
82 pF
91 pF
100 pF
110 pF
120 pF
130 pF
150 pF
160 pF
180 pF
200 pF
220 pF
240 pF
270 pF
300 pF
330 pF
360 pF
390 pF
430 pF
470 pF
510 pF
560 pF
620 pF
680 pF
750 pF
820 pF
910 pF
1,000 pF
109 - 169*
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
331
361
391
431
471
511
B
C
D
DG DG DG
LB LB LB LB LB LB LB
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EU EU EU EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EF EF EF EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EF EF EF EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EF EF EF EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EF EF EF EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EF EF EF EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EF EF EF EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EF EF EF EU EU FM FM FM FM FM LB LB LB LB LB LB LB
DG DG DG EF EF EF EU EU FM FM FM FM FM LB LB LB LB LB LC LB
DG DG DG EF EF EF EU EU FM FM FM FM FM LB LB LB LB LB LC LB
DG DG DG EF EF EF EU EU FZ FZ FZ FM FM LA LA LA LA LB LC LB
DG DG DG EF EF EF EU EU FZ FZ FZ FM FM LA LA LA LA LB LC LC
DG DG DG EF EF EF EU EU FZ FZ FZ FM FM LA LA LA LA LB LC LC
DG DG DG EF EF EF EU EU FZ FZ FZ FM FM LA LA LA LA LC LC LC
DG DG DG EF EF EF EU EU FZ FZ FZ FM FM LA LA LA LA LC LC LC
DG DG DG EF EU EU EU EU FZ FZ FZ FM FM LA LA LA LA LC LC
DG DG DG EF EU EU EU EU FZ FZ FZ FM FM LA LA LA LA LC LC
DG DG DG EF EU EU EU EU FZ FZ FZ FM FM LA LA LA LB LC LC
DG DG DG EF EU EU EU EU FZ FZ FZ FK FK LA LA LA LB LC LC
DG DG
DG DG
DG DG
DG DG
DG DG
DG DG
DG DG
DG DG
DG
EF EU EU EU
EF EU EU EU
EU EU EU EU
EU EU EU EU
EU EU EU EU
EU EU EU EU
EU EU EU EU
EU EU EU EU
EU EU EU
EU EU EU
EU EF EU
EU EF EU
EU EF EU
FZ FZ FZ FK FK LA LA LA LB LC LC
FZ FZ FZ FK FK LA LA LA LB LC LC
FZ FZ FZ FK FS LA LA LA LB LA LC
FZ FZ FZ FK FS LA LA LA LB LA LC
FZ FM FM FS FS LA LB LB LC LA
FZ FM FM FS FS LA LB LB LC LA
FZ FM FM FS FS LA LB LB LC LB
FZ FM FM FS FS LA LB LB LC LB
FZ FM FM FS FS LA LB LB LA LC
FZ FM FM FS FS LB LB LB LA LC
561
621
681
751
821
911
102
DG
DG
DG
FZ FM FM FM
FZ FM FM FM
FM FM FM FY
FM FM FM FY
LB LB LB LA
LB LB LB LA
LB LB LB LA
LB LB LB LB
EU EF EU
Rated Voltage (VDC)
Capacitance
Cap Code
Voltage Code
C
B
D
C
B
D
F
G
C
B
D
F
G
C
B
D
F
G
Z
H
Case Size/Series
C0805X
C1206X
C1210X
C1808X
*Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82 and 91)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within
the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts..
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016
6
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Table 1A – Capacitance Range/Selection Waterfall (0805 – 1808 Case Sizes) cont’d
Case Size/Series
C0805X
C1206X
C1210X
C1808X
Voltage Code
C
B
D
C
B
D
F
G
C
B
D
F
G
C
B
D
F
G
Z
H
Capacitance Cap Code
Rated Voltage (VDC)
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
Capacitance Tolerance
1,100 pF
1,200 pF
1,300 pF
1,500 pF
1,600 pF
1,800 pF
2,000 pF
2,200 pF
2,400 pF
2,700 pF
3,000 pF
3,300 pF
3,600 pF
3,900 pF
4,300 pF
4,700 pF
5,100 pF
5,200 pF
6,200pF
6,800pF
7,500pF
8,200pF
112
122
132
152
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
EF EU
EF EU
EF EU
EF EU
EF EU
EF EU
EU EQ
EU EQ
EU EQ
EU EQ
EQ EQ
EQ EQ
ER ER
ER ER
ES ES
ES ES
FM FK FK FS
FM FK FK FS
FM FS FS
FK FS FS
FK FS FS
FK FS FS
FK FL FS
FK FL FS
FS FL FS
FS FL FS
FS FL
FS FM
FL FM
FL FY
FM FY
FM FY
FY FS
FY FS
FY FE
LC LC LC LB
LC LC LC LC
LC LC LC LC
LC LC LC LC
LC LC LC
LC LC LC
LC LA LB
LC LA LB
LC LA LB
LC LA LC
LA LA
LA LA
LA LB
LA LB
LA LC
LA LC
LA
LB
LC
FY FE
FS
FS
LC
Rated Voltage (VDC)
Capacitance
Cap Code
Voltage Code
C
B
D
C
B
D
F
G
C
B
D
F
G
C
B
D
F
G
Z
H
Case Size/Series
C0805X
C1206X
C1210X
C1808X
*Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82 and 91)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within
the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts..
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016
7
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Table 1B – Capacitance Range/Selection Waterfall (1812 – 2225 Case Sizes)
Case Size/Series
Voltage Code
C1812X
C1825X
C2220X
C2225X
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
Cap
Cap
Code
Rated Voltage (VDC)
Capacitance
Tolerance
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
10 pF
11 pF
12 pF
13 pF
15 pF
16 pF
18 pF
20 pF
22 pF
24 pF
27 pF
30 pF
33 pF
36 pF
39 pF
43 pF
47 pF
51 pF
56 pF
62 pF
68 pF
75 pF
82 pF
91 pF
100 pF
110 pF
120 pF
130 pF
150 pF
160 pF
180 pF
200 pF
220 pF
240 pF
270 pF
300 pF
330 pF
360 pF
390 pF
430 pF
470 pF
510 pF
560 pF
620 pF
680 pF
750 pF
820 pF
910 pF
1,000 pF
1,100 pF
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
112
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GK GK GK GK GK GK GK
GH GH GH GH GH GK GM
GH GH GH GH GH GK GM
GH GH GH GH GH GK GM
GH GH GH GH GH GK GM
GH GH GH GH GH GK GM
GH GH GH GH GH GK GO
GK GK GK GK GH GK GO
GK GK GK GK GK GK GO
GK GK GK GK GK GK
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KF KF KF KF KF KF KF
JK JK JK JK JK JK JK KE KE KE KE KE KE KF
JK JK JK JK JK JK JK KE KE KE KE KE KE KF
JK JK JK JK JK JK JK KE KE KE KE KE KE KF
JE JE JE JE JE JK JK KE KE KE KE KE KE KF
JE JE JE JE JE JK JK KE KE KE KE KE KE KF
JE JE JE JE JE JK JK KE KE KE KE KE KE KF
HJ HJ HJ HJ HJ HJ HJ JE JE JE JE JE JK JE KE KE KE KE KE KE KF
HJ HJ HJ HJ HJ HJ HJ JE JE JE JE JE JK JK KF KF KF KF KE KE KF
HJ HJ HJ HJ HJ HJ HJ JK JK JK JK JK JK JK KF KF KF KF KE KE KF
HJ HJ HJ HJ HJ HJ HJ JK JK JK JK JK JK JL KF KF KF KF KE KE KF
HK HK HK HK HK HK HK JK JK JK JK JK JK JL KF KF KF KF KE KF KH
HK HK HK HK HK HK HK JE JE JE JK JK JK JL KF KF KF KF KE KF KH
JE JE JE JK JK JK JL KE KE KE KF KE KF KH
JE JE JE JK JK JK JN KE KE KE KF KE KF KJ
JE JK JK JK JK JK JN KE KE KE KF KE KF KJ
JE JK JK JK JK JK JN KE KE KE KF KE KF KJ
GK GK GK GK GK GK
GH GH GH GK GH GM
GH GH GH GK GH GM
GH GH GH GK GH GM
GH GH GH GK GH GO
GH GH GH GK GK
GH GH GH GK GK
GH GH GH GH GM
GH GH GH GH GM
GH GK GK GH GO
HJ HJ HJ HJ HJ HJ
JE JK JK JK JK JK
KE KE KE KF KF KF
Rated Voltage (VDC)
Voltage Code
Cap
Code
Cap
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
Case Size/Series
C1812X
C1825X
C2220X
C2225X
*Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82 and 91)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within
the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts..
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016
8
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Table 1B – Capacitance Range/Selection Waterfall (1812 – 2225 Case Sizes) cont’d
Case Size/Series
Voltage Code
C1812X
C1825X
C2220X
C2225X
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
Cap
Cap
Code
Rated Voltage (VDC)
Capacitance
Tolerance
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
1,200 pF
1,300 pF
1,500 pF
1,600 pF
1,800 pF
2,000 pF
2,200 pF
2,400 pF
2,700 pF
3,000 pF
3,300 pF
3,600 pF
3,900 pF
4,300 pF
4,700 pF
5,100 pF
5,600 pF
6,200 pF
6,800 pF
7,500 pF
8,200 pF
9,100 pF
10,000 pF
12,000 pF
15,000 pF
18,000 pF
22,000 pF
27,000 pF
33,000 pF
39,000 pF
122
132
152
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
123
153
183
223
273
333
393
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
GH GK GK GH GO
GH GK GK GH GO
GK GK GK GK GO
GK GK GK GK
GK GK GK GM
GK GK GK GM
GK GK GK GO
GK GH GK GO
GK GH GK GO
GK GH GK
GK GH GK
GK GH GM
GK GH GM
GH GH GO
GH GH GO
GH GK GO
GH GK GO
GH GK
HJ HJ HJ HJ HJ HJ
HE HE HE HE HE HJ
HE HE HE HE HE HK
HG HG HG HG HG HK
HG HG HG HG HG
HE HE HE HE HJ
HE HE HE HE HJ
HE HE HE HE HJ
HE HE HE HE HK
HE HE HE HE HK
HG HG HG HG
HG HG HG HG
HJ HJ HJ HJ
HJ HJ HJ HJ
HJ HJ HJ HJ
HE HE HG HK
HE HE HG HK
HE HE HG
HE HE HJ
HE HE HJ
HE HE HJ
HE HG HK
HE HG HK
HE HG
HE HJ
HG HK
JE JK JK JK JK JL
JE JK JK JK JE JL
JE JK JK JK JE JL
JE JK JK JK JE JL
JE JK JK JK JE JN
JE JK JK JE JK
JE JK JK JE JK
JK JK JK JE JL
JK JK JK JE JL
JK JK JK JE JL
JK JK JK JK JN
JK JK JK JK JN
JK JK JK JK JN
JK JK JK JK
JK JK JK JL
JK JK JK JL
JK JK JK JN
JK JE JE JN
JK JE JK JN
JK JE JK
KE KE KE KF KF KF
KE KE KE KF KF KH
KE KE KE KF KF KH
KE KE KE KF KE KH
KE KE KE KF KE KH
KE KE KE KF KE KJ
KE KE KE KF KF KJ
KE KE KE KE KH
KE KE KE KE KH
KE KE KE KE KH
KE KE KE KE KJ
KE KF KF KF KJ
KE KF KF KF KJ
KE KF KF KF
KE KF KF KH
KE KF KF KH
KE KF KF KH
KE KF KF KJ
KE KF KF KJ
KF KE KF
GH GM
GH GM
GK GO
GM GO
GM GO
GO
GO
JK JE JL
JE JE JL
JE JE JL
JE JK JN
JE JL
JE JL
JK JN
JL JN
KF KE KF
KF KE KH
KF KE KH
KE KE KH
KE KF KJ
KE KH
KF KJ
KF KJ
HJ
HJ
HK
JN
KH
KJ
Rated Voltage (VDC)
Voltage Code
Cap
Code
Cap
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
C
B
D
F
G
Z
H
Case Size/Series
C1812X
C1825X
C2220X
C2225X
*Capacitance range Includes E24 decade values only. (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82 and 91)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within
the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts..
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016
9
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Table 2 – Chip Thickness/Tape & Reel Packaging Quantities
Paper Quantity
7" Reel 13" Reel
Plastic Quantity
7" Reel 13" Reel
Thickness Case Thickness ±
Code
Size
Range (mm)
DG
EQ
EF
EU
ER
ES
FE
FZ
FL
FM
FY
FK
FS
LA
LB
LC
GH
GK
GM
GO
HE
HG
HJ
HK
JE
805
1.25 ± 0.15
0.78 ± 0.20
1.20 ± 0.15
1.60 ± 0.25
0.90 ± 0.20
1.00 ± 0.20
1.00 ± 0.10
1.25 ± 0.20
1.40 ± 0.15
1.70 ± 0.20
2.00 ± 0.20
2.10 ± 0.20
2.50 ± 0.30
1.40 ± 0.15
1.60 ± 0.15
2.00 ± 0.15
1.40 ± 0.15
1.60 ± 0.20
2.00 ± 0.20
2.50 ± 0.20
1.40 ± 0.15
1.60 ± 0.20
2.00 ± 0.20
2.50 ± 0.20
1.40 ± 0.15
1.60 ± 0.20
2.00 ± 0.20
2.50 ± 0.20
1.40 ± 0.15
1.60 ± 0.20
2.00 ± 0.20
2.50 ± 0.20
0
0
2,500
4,000
2,500
2,000
4,000
2,500
2,500
2,500
2,000
2,000
2,000
2,000
1,000
1,000
1,000
1,000
1,000
1,000
500
10,000
10,000
10,000
8,000
10,000
10,000
10,000
10,000
8,000
8,000
8,000
8,000
4,000
4,000
4,000
4,000
4,000
4,000
2,000
2,000
4,000
4,000
2,000
2,000
4,000
4,000
2,000
2,000
4,000
4,000
2,000
2,000
1206
1206
1206
1206
1206
1210
1210
1210
1210
1210
1210
1210
1808
1808
1808
1812
1812
1812
1812
1825
1825
1825
1825
2220
2220
2220
2220
2225
2225
2225
2225
4000
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
10000
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
500
1,000
1,000
500
500
1,000
1,000
500
JK
JL
JN
KE
KF
KH
KJ
500
1,000
1,000
500
500
7" Reel
13" Reel
7" Reel
13" Reel
Thickness
Code
Case
Size
Thickness ±
Range (mm)
Paper Quantity
Plastic Quantity
Package quantity based on finished chip thickness specifications.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Table 3 – Chip Capacitor Land Pattern Design Recommendations per IPC–7351
Density Level A:
Maximum (Most)
Land Protrusion (mm)
Density Level B:
Median (Nominal)
Land Protrusion (mm)
Density Level C:
Minimum (Least)
Land Protrusion (mm)
EIA
Size
Code
Metric
Size
Code
C
Y
X
V1
V2
C
Y
X
V1
V2
C
Y
X
V1
V2
0805
1206
1210
1808
1812
1825
2220
2225
2012
3216
3225
4520
4532
4564
5650
5664
0.99
1.44
1.66
4.47
2.71
0.89
1.24
1.56
3.57
2.11
0.79
1.04
1.46
2.42
1.81
1.59
1.59
2.30
2.10
2.15
2.85
2.85
1.62
1.62
1.75
1.80
1.80
2.10
2.10
2.06
3.01
2.30
3.60
6.90
5.50
6.90
5.85
5.90
7.40
7.00
7.10
3.06
4.01
3.30
4.60
7.90
6.50
7.90
1.49
1.49
2.20
2.00
2.05
2.75
2.75
1.42
1.42
1.55
1.60
1.60
1.90
1.90
1.96
2.91
2.20
3.50
6.80
5.40
6.80
4.95
4.95
6.50
6.10
6.20
7.90
7.90
2.46
3.41
2.70
4.00
7.30
5.90
7.30
1.39
1.39
2.10
1.90
1.95
2.65
2.65
1.22
1.22
1.35
1.40
1.40
1.70
1.70
1.86
2.81
2.10
3.40
6.70
5.30
6.70
4.25
4.25
5.80
5.40
5.50
7.20
7.20
2.16
3.11
2.40
3.70
7.00
5.60
7.00
8.80
8.80
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder
processes. KEMET only recommends wave soldering of EIA 0603, 0805 and 1206 case sizes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
Image below based on Density Level B for an EIA 1210 case size.
V1
Y
Y
V2
X
X
C
C
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Soldering Process
Recommended Soldering Technique:
• Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206
• All other EIA case sizes are limited to solder reflow only
Recommended Reflow Soldering Profile:
KEMET’s families of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), convection,
IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET’s
recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020 standard for moisture
sensitivity testing. These devices can safely withstand a maximum of three reflow passes at these conditions.
TP
TL
Termination Finish
tP
Maximum Ramp Up Rate = 3°C/sec
Maximum Ramp Down Rate = 6°C/sec
Profile Feature
SnPb
100% Matte Sn
tL
Preheat/Soak
Tsmax
Tsmin
Temperature Minimum (TSmin
Temperature Maximum (TSmax
Time (tS) from TSmin to TSmax
)
100°C
150°C
150°C
200°C
)
tS
60 – 120 seconds
60 – 120 seconds
Ramp-Up Rate (TL to TP)
Liquidous Temperature (TL)
Time Above Liquidous (tL)
Peak Temperature (TP)
3°C/second maximum 3°C/second maximum
25
183°C
60 – 150 seconds
235°C
217°C
60 – 150 seconds
260°C
25° C to Peak
Time
Time Within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-Down Rate (TP to TL) 6°C/second maximum 6°C/second maximum
Time 25°C to Peak
6 minutes maximum
8 minutes maximum
Temperature
Note 1: All temperatures refer to the center of the package, measured on the
capacitor body surface that is facing up during assembly reflow.
Storage and Handling
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 70%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of
receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Construction
Detailed Cross Section
Dielectric Material
(CaZrO3)
End Termination/
Barrier Layer
External Electrode
(Ni)
(Cu)
Termination Finish
(100% Matte Sn)
Epoxy Layer
(Ag)
Dielectric Material
(CaZrO3)
Inner Electrodes
(Ni)
End Termination/
External Electrode
(Cu)
Epoxy Layer
(Ag)
Barrier Layer
(Ni)
Termination Finish
(100% Matte Sn)
Inner Electrodes
(Ni)
Capacitor Marking (Optional):
Laser marking option is not available on:
• C0G, Ultra Stable X8R and Y5V dielectric devices
• EIA 0402 case size devices
• EIA 0603 case size devices with Flexible Termination option.
• KPS Commercial and Automotive grade stacked devices.
These capacitors are supplied unmarked only.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 13
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Tape & Reel Packaging Information
KEMET offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with EIA
Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on
reeling quantities for commercial chips.
Bar Code Label
Anti-Static Reel
®
Embossed Plastic* or
Punched Paper Carrier.
Chip and KPS Orientation in Pocket
(except 1825 Commercial, and 1825 and 2225 Military)
KEMET
Sprocket Holes
Embossment or Punched Cavity
8 mm, 12 mm
or 16 mm Carrier Tape
Anti-Static Cover Tape
(.10 mm (.004") Maximum Thickness)
178 mm (7.00")
or
330 mm (13.00")
*EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only.
Table 5 – Carrier Tape Configuration, Embossed Plastic & Punched Paper (mm)
New 2 mm Pitch Reel Options*
Embossed Plastic Punched Paper
Tape
Packaging
Ordering Code
(C-Spec)
C-3190
7" Reel
13" Reel
7" Reel
13" Reel
EIA Case Size Size
(W)*
Packaging Type/Options
Pitch (P1)*
Pitch (P1)*
01005 – 0402
0603
8
8
2
2/4
4
2
2/4
4
Automotive grade 7" reel unmarked
Automotive grade 13" reel unmarked
Commercial grade 7" reel unmarked
Commercial grade 13" reel unmarked
C-3191
C-7081
0805
8
4
4
4
4
C-7082
1206 – 1210
1805 – 1808
≥ 1812
8
4
4
* 2 mm pitch reel only available for 0603 EIA case size.
2 mm pitch reel for 0805 EIA case size under development.
12
12
12
16
8
4
4
8
8
Benefits of Changing from 4 mm to 2 mm Pitching Spacing
• Lower placement costs
• Double the parts on each reel results in fewer reel
changes and increased efficiency
• Fewer reels result in lower packaging, shipping and
storage costs, reducing waste
KPS 1210
8
8
KPS 1812 & 2220
Array 0508 & 0612
12
4
12
4
*Refer to Figures 1 & 2 for W and P1 carrier tape reference locations.
*Refer to Tables 6 & 7 for tolerance specifications.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 14
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P2
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
2
E
1
Po
ØDo
Ao
F
Ko
W
E
2
B
1
Bo
S
1
P
1
T
1
Embossment
For cavity size,
see Note 1 Table 4
Center Lines of Cavity
ØD
1
Cover Tape
is for tape feeder reference only,
including draft concentric about B
B
1
o
.
User Direction of Unreeling
Table 6 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
1.0
(0.039)
R Reference S1 Minimum
T
T1
Tape Size
8 mm
D0
E1
P0
P2
Note 2
Note 3
Maximum
Maximum
25.0
(0.984)
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm
16 mm
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
1.5
(0.059)
30
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Note 4
4.35
(0.171)
E2
T2
W
Tape Size
8 mm
Pitch
F
P1
A0,B0 & K0
Minimum
6.25
(0.246)
Maximum
2.5
(0.098)
Maximum
8.3
(0.327)
3.5 ±0.05
(0.138 ±0.002) (0.157 ±0.004)
4.0 ±0.10
Single (4 mm)
Single (4 mm) &
Double (8 mm)
8.2
10.25
5.5 ±0.05
8.0 ±0.10
4.6
12.3
12 mm
16 mm
Note 5
(0.323)
(0.404)
(0.217 ±0.002) (0.315 ±0.004)
(0.181)
(0.484)
12.1
(0.476)
14.25
(0.561)
7.5 ±0.05 12.0 ±0.10
(0.138 ±0.002) (0.157 ±0.004)
4.6
(0.181)
16.3
(0.642)
Triple (12 mm)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 6).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481 paragraph 4.3 section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4).
(e) for KPS Series product, A0 and B0 are measured on a plane 0.3 mm above the bottom of the pocket.
(f) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 15
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Figure 2 – Punched (Paper) Carrier Tape Dimensions
T
P2
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E
1
Po
ØDo
0
A
F
W
2
E
0
B
Bottom Cover Tape
P
1
G
Cavity Size,
See
1
T
1
T
Top Cover Tape
Center Lines of Cavity
Note 1, Table 7
Bottom Cover Tape
User Direction of Unreeling
Table 7 – Punched (Paper) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
R Reference
Note 2
Tape Size
8 mm
D0
E1
P0
P2
T1 Maximum
G Minimum
0.10
1.5 +0.10 -0.0
(0.059 +0.004 -0.0)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
0.75
(0.030)
25
(0.984)
(0.004)
Maximum
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
Pitch
E2 Minimum
F
P1
T Maximum
W Maximum
A0 B0
2.0 ±0.05
(0.079 ±0.002)
4.0 ±0.10
8.3
(0.327)
8.3
Half (2 mm)
Single (4 mm)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
1.1
(0.098)
Note 1
8 mm
(0.157 ±0.004)
(0.327)
1. The cavity defined by A0, B0 and T shall surround the component with sufficient clearance that:
a) the component does not protrude beyond either surface of the carrier tape.
b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
c) rotation of the component is limited to 20° maximum (see Figure 3).
d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4).
e) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements.
2. The tape with or without components shall pass around R without damage (see Figure 6).
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 16
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
12 and 16 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 3 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Maximum
°
°
T
s
Width (mm) Rotation (
)
8,12
16 – 200
20
10
Bo
Tape
Maximum
°
S
Width (mm) Rotation (
)
8,12
16 – 56
72 – 200
20
10
5
Typical Component Centerline
Ao
Figure 5 – Bending Radius
Figure 4 – Maximum Lateral Movement
Embossed
Carrier
Punched
Carrier
8 mm & 12 mm Tape
16 mm Tape
0.5 mm maximum
0.5 mm maximum
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 17
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Figure 6 – Reel Dimensions
Full Radius,
W3 (Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm minimum)
See Note
W
2 (Measured at hub)
D
(See Note)
A
N
C
(Arbor hole
W
1 (Measured at hub)
diameter)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
B
(see Note)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 8 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
D Minimum
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Minimum
W1
W2 Maximum
W3
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
50
(1.969)
12.4 +2.0/-0.0
18.4
Shall accommodate tape width
without interference
12 mm
16 mm
(0.488 +0.078/-0.0)
(0.724)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 18
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Figure 7 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Round Sprocket Holes
Punched Carrier
8 mm & 12 mm only
START
END
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
100 mm
Minimum Leader
400 mm Minimum
Trailer
160 mm Minimum
Components
Top Cover Tape
Figure 8 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 19
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Beijing, China
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Tel: 86-10-5877-1075
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Shanghai, China
Tel: 86-21-6447-0707
Kamen, Germany
Tel: 49-2307-438110
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Seoul, South Korea
Tel: 82-2-6294-0550
Northern Europe
Wyboston, United Kingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
North America
Northeast
Wilmington, MA
Tel: 978-658-1663
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
Southeast
Lake Mary, FL
Tel: 407-855-8886
Penang, Malaysia
Tel: 60-4-6430200
Central
Novi, MI
Tel: 248-994-1030
Bangalore, India
Tel: 91-806-53-76817
Irving, TX
Tel: 972-915-6041
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 20
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 – 3,000 VDC (Automotive Grade)
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1081_C0G_HV_FT_AUTO_SMD • 2/29/2016 21
相关型号:
C0805X393CBGACTU
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500VDC - 3000VDC (Commercial & Automotive Grade)
KEMET
C0805X393CBGALTU
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500VDC - 3000VDC (Commercial & Automotive Grade)
KEMET
C0805X393CCGACAUTO
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 - 3,000 VDC (Automotive Grade)
KEMET
C0805X393CCGACTU
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500VDC - 3000VDC (Commercial & Automotive Grade)
KEMET
C0805X393CCGALTU
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500VDC - 3000VDC (Commercial & Automotive Grade)
KEMET
C0805X393CDGACAUTO
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 - 3,000 VDC (Automotive Grade)
KEMET
C0805X393CDGACTU
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500VDC - 3000VDC (Commercial & Automotive Grade)
KEMET
C0805X393CDGALTU
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500VDC - 3000VDC (Commercial & Automotive Grade)
KEMET
C0805X393CFGACAUTO
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 - 3,000 VDC (Automotive Grade)
KEMET
C0805X393CFGACTU
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500VDC - 3000VDC (Commercial & Automotive Grade)
KEMET
C0805X393CFGALTU
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500VDC - 3000VDC (Commercial & Automotive Grade)
KEMET
C0805X393CGGACAUTO
High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 - 3,000 VDC (Automotive Grade)
KEMET
©2020 ICPDF网 联系我们和版权申明