C315C229J1G5TA
更新时间:2024-09-18 06:53:26
品牌:KEMET
描述:MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
C315C229J1G5TA 概述
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED 多层陶瓷电容器/推力和径向引线
C315C229J1G5TA 数据手册
通过下载C315C229J1G5TA数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
Multilayer ceramic capacitors are available in a
variety of physical sizes and configurations, including
leaded devices and surface mounted chips. Leaded
styles include molded and conformally coated parts
with axial and radial leads. However, the basic
capacitor element is similar for all styles. It is called a
chip and consists of formulated dielectric materials
which have been cast into thin layers, interspersed
with metal electrodes alternately exposed on opposite
edges of the laminated structure. The entire structure is
fired at high temperature to produce a monolithic
block which provides high capacitance values in a
small physical volume. After firing, conductive
terminations are applied to opposite ends of the chip to
make contact with the exposed electrodes.
Termination materials and methods vary depending on
the intended use.
TEMPERATURE CHARACTERISTICS
Ceramic dielectric materials can be formulated with
a wide range of characteristics. The EIA standard for
ceramic dielectric capacitors (RS-198) divides ceramic
dielectrics into the following classes:
Class III: General purpose capacitors, suitable
for by-pass coupling or other applications in which
dielectric losses, high insulation resistance and
stability of capacitance characteristics are of little or
no importance. Class III capacitors are similar to Class
II capacitors except for temperature characteristics,
Class I: Temperature compensating capacitors,
suitable for resonant circuit application or other appli-
cations where high Q and stability of capacitance char-
acteristics are required. Class I capacitors have
predictable temperature coefficients and are not
effected by voltage, frequency or time. They are made
from materials which are not ferro-electric, yielding
superior stability but low volumetric efficiency. Class I
capacitors are the most stable type available, but have
the lowest volumetric efficiency.
which are greater than
15%. Class III capacitors
have the highest volumetric efficiency and poorest
stability of any type.
KEMET leaded ceramic capacitors are offered in
the three most popular temperature characteristics:
C0G: Class I, with a temperature coefficient of 0
30 ppm per degree C over an operating
temperature range of - 55°C to + 125°C (Also
known as “NP0”).
X7R: Class II, with a maximum capacitance
change of 15% over an operating temperature
range of - 55°C to + 125°C.
Z5U: Class III, with a maximum capacitance
change of + 22% - 56% over an operating tem-
perature range of + 10°C to + 85°C.
Class II: Stable capacitors, suitable for bypass
or coupling applications or frequency discriminating
circuits where Q and stability of capacitance char-
acteristics are not of major importance. Class II
capacitors have temperature characteristics of 15%
or less. They are made from materials which are
ferro-electric, yielding higher volumetric efficiency but
less stability. Class II capacitors are affected by
temperature, voltage, frequency and time.
Specified electrical limits for these three temperature
characteristics are shown in Table 1.
SPECIFIED ELECTRICAL LIMITS
TEMPERATURE CHARACTERISTICS
PARAMETER
C0G
X7R
Z5U
Dissipation Factor: Measured at following conditions:
C0G — 1 kHz and 1 vrms if capacitance > 1000 pF
1 MHz and 1 vrms if capacitance ≤ 1000 pF
X7R — 1 kHz and 1 vrms* or if extended cap range 0.5 vrms
Z5U — 1 kHz and 0.5 vrms
0.15%
2.5%
4.0%
Dielectric Strength: 2.5 times rated DC voltage.
Pass Subsequent IR Test
Insulation Resistance (IR): At rated DC voltage,
whichever of the two is smaller
1,000 MΩ-µF
or 100 GΩ
1,000 MΩ-µF
or 100 GΩ
1,000 MΩ-µF
or 10 GΩ
Temperature Characteristics: Range, °C
Capacitance Change without
DC voltage
-55 to +125
30 ppm/°C
-55 to +125
15%
+10 to +85
+22%, -56%
0
* 1 MHz and 1 vrms if capacitance ≤ 100 pF on military product.
Table I
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
3
CERAMIC CONFORMALLY COATED/AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS FOR STANDARD AND HIGH VOLTAGE
GENERAL SPECIFICATIONS
Working Voltage:
ENVIRONMENTAL
Vibration:
Axial (WVDC)
Radial (WVDC)
EIA RS-198, Method 304, Condition D (10-2000Hz; 20g)
Shock:
EIA RS-198, Method 305, Condition I (100g)
C0G – 50 & 100
X7R – 50 & 100
Z5U – 50 & 100
50, 100, 200, 500, 1k, 1.5k, 2k, 2.5k, 3k
50, 100, 200, 500, 1k, 1.5k, 2k, 2.5k, 3k
50 & 100
Life Test:
EIA RS-198, Method 201, Condition Dꢀ
?ꢀ200V
Temperature Characteristics:
C0G – 0 30 PPM / °C from - 55°C to + 125°C (1)
X7R – 15% from - 55°C to + 125°C
Z5U – + 22% / -56% from + 10°C to + 85°C
C0G – 200% of rated voltage @ +125°C
X7R – 200% of rated voltage @ +125°C
Z5U – 200% of rated voltage @ +85°C
Capacitance Tolerance:
Oꢀ500V
C0G – rated voltage @ +125°C
X7R – rated voltage @ +125°C
C0G – 0.5ꢀp, 1%, 2%, 5%, 10%
X7R – 10%, 20%, +80% / -20%, +100% / -0%
Z5U – 20%, +80% / -20%
Post Test Limits @ 25°C are:
Capacitance Change:
Construction:
Epoxy encapsulated - meets flame test requirements of UL
Standard 94V-0.
C0G (? 200V) – +3% or 0.25ꢀp, whichever is greater.
C0G (O 500V) – +3% or 0.50ꢀp, whichever is greater.
X7R – + 20% of initial value (2)
High-temꢀerature solder - meets EIA RS-198, Method 302,
Condition B (260°C for 10 seconds)
Z5U – + 30% of initial value (2)
Dissipation Factor:
Lead Material:
100% matte tin (Sn) with nickel (Ni) underꢀlate and steel core.
C0G – 0.15% maximum
X7R – 2.5% maximum
Z5U – 4.0% maximum
Insulation Resistance:
Solderability:
EIA RS-198, Method 301, Solder Temperature: 230°C ±±°Cꢀ
Dwell time in solder = 7 ½ seconds.
C0G – 10k Megohm or 100 Megohm x µp, whichever is less.
O1kV tested @ 500V.
X7R – 10k Megohm or 100 Megohm x µp, whichever is less.
O1kV tested @ 500V.
Z5U – 1k Megohm or 100 Megohm x µp, whichever is less.
Terminal Strength:
EIA RS-198, Method 303, Condition A (2ꢀ2kg)
Moisture Resistance:
ELECTRICAL
Capacitance @ 25°C:
EIA RS-198, Method 204, Condition A (10 cycles without
applied voltageꢀ)
Post Test Limits @ 25°C are:
Within specified tolerance and following test conditionsꢀ
C0G – > 1000ꢀp with 1.0 vrms @ 1 kHz
? 1000ꢀp with 1.0 vrms @ 1 MHz
X7R – with 1.0 vrms @ 1 kHz
Capacitance Change:
C0G (? 200V) – +3% or 0.25ꢀp, whichever is greater.
C0G (O 500V) – +3% or 0.50ꢀp, whichever is greater.
X7R – + 20% of initial value (2)
Z5U – with 1.0 vrms @ 1 kHz
Z5U – + 30% of initial value (2)
Dissipation Factor:
Dissipation Factor @ 25°C:
Same test conditions as capacitanceꢀ
C0G – 0.15% maximum
C0G – 0.25% maximum
X7R – 3.0% maximum
X7R – 2.5% maximum
Z5U – 4.0% maximum
Z5U – 4.0% maximum
Insulation Resistance:
C0G – 10k Megohm or 100 Megohm x µp, whichever is less.
?500V test @ rated voltage, O1kV test @ 500V.
X7R – 10k Megohm or 100 Megohm x µp, whichever is less.
O500V test @ rated voltage, >1kV test @ 500V.
Z5U – 1k Megohm or 100 Megohm x µp, whichever is less.
Insulation Resistance @ 25°C:
EIA RS-198, Method 104, Condition A <1kV
C0G – 100k Megohm or 1000 Megohm x µp, whichever is less.
?500V test @ rated voltage, O1kV test @ 500V
X7R – 100k Megohm or 1000 Megohm x µp, whichever is less.
?500V test @ rated voltage, O1kV test @ 500V
Z5U – 10k Megohm or 1000 Megohm x µp, whichever is less.
Thermal Shock:
EIA RS-198, Method 202, Condition B (C0G & X7R: -±±°C to
+12±°C); Condition A (Z±U: -±±°C to 8±°C)
Dielectric Withstanding Voltage:
EIA RS-198, Method 103
?200V test @ 250% of rated voltage for 5 seconds with current
limited to 50mA.
(1)+53
PPM
and
-30
PPM/
°C
from
+25°C
aging
to
-55°C,
+
60
10ꢀp.
500V test @ 150% of rated voltage for 5 seconds with current
limited to 50mA.
(2)X7R
Z5U
dielectrics
exhibit
characteristics;
there
fore, it is highly recommended that caꢀacitors be deaged for 2
hours at 150°C and stabilized at room temꢀerature for 48
hours before caꢀacitance measurements are made.
O1000V test @ 120% of rated voltage for 5 seconds with current
limited to 50mA.
4
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CONFORMALLY COATED/RADIAL
“STANDARD & HIGH VOLTAGE GOLDEN MAX”
STANDARD LEAD CONFIGURATION — OUTLINE DRAWINGS
*.276 (7.00) MIN.
L
T
C315
C320
C330
C340
C350
C317
C322
C330
.060
(1.52)
MAX.
C323
C333
H
H
H
H
*
*
D
*
*
S
S
S
S
Drawings are not to scale. See table below for dimensions.
See page 10 for optional lead configurations.
DIMENSIONS — INCHES & MILLIMETERS
Standard
High
D
CASE
Case
L
H
MAX.
T
S(1)
±.030 (.78)
±.030 (.78)
D
L
H.
Max
S(1)
T
Voltage
MAX.
+.004(.10)
SIZE
MAX.
+.004 (.10)- .001 (.025)
Size
Max.
Max.
0.100
T Max.
-.001(.025)
C315
.150 (3.81)
.210 (5.33)
0.210 (5.33)
.230 (5.84)
0.230 (5.84)
.260 (6.60)
.130 (3.30)
.100 (2.54)
0.100 (2.54)
.200 (5.08)
0.200 (5.08)
.100 (2.54)
.020 (.51)
C315
C317
0.150 (3.81)
.150 (3.81)
0.150
.130 (3.30)
0.150
0.020 (.51)
.020 (.51)
C317
0.150 (3.81)
0.100
0.125
0.125
0.125
0.020 (.51)
C320
.200 (5.08)
.150 (3.81)
.020 (.51)
C320
0.200 (5.08)
0.260 (6.60)
.260 (6.60)
0.200
0.100 (2.54)
.200 (5.08)
0.020 (.51)
C322
.200 (5.08)
.150 (3.81)
.020 (.51)
C322
0.200 (5.08)
0.260 (6.60)
.320 (8.13)
0.200
0.200 (5.08)
.200 (5.08)
0.020 (.51)
.020 (.51)
0.020 (.51)
C323
C323
.200 (5.08)
0.200 (5.08)
.150 (3.81)
0.200
0.320 (8.13)
0.200 (5.08)
0.200.2(50.008(5).08) 0.020 (.51.)020 (.51)
0.200 (5.08) 0.020 (.51)
CC333030
0..330000 ((77..6622))
0.360.3(960.14(9).14) 0.150 .200 (05..0285)0
C333
C333
0.300 (7.62)
.300 (7.62)
0.390 (9.91)
.390 (9.91)
0.150
0.150
0.200
0.250
.200 (5.08)
.200 (5.08) .020 (.51)
C340
0.400 (10.16) 0.460 (11.68)
0.270
0.200 (5.08)
0.020 (.51)
C340
.400 (10.16)
.460 (11.68)
.200 (5.08)
.200 (5.08) .020 (.51)
C350
0.500 (12.70) 0.560 (14.22)
0.270
0.400 (10.16)
0.025 (.64)
C350
.500 (12.70)
.560 (14.22)
.250 (6.35)
.400 (10.16) .025 (.64)
NOTE: 1 inch = 25.4 mm.
NOTE: (1) Measured at seating plane.
ORDERING INFORMATION
102
T A
*
C 320 C
M
R 5
1
CERAMIC
FAILURE RATE
A — Not Applicable
TERMINATION MATERIAL
T — 100% Tin
CASE SIZE
(See Table Above)
H — SnPb
C — 100% Sn
SPECIFICATION
C — Standard
(
Not recommended for new design)
INTERNAL
CAPACITANCE, CODE
CONSTRUCTION
5 — Standard
Expressed in Picofarads (pF)
First Two Digits — Significant Figures
Third Digit — Number of Zeros (Use 9 for 1.0
thru 9.9 pF. Example: 2.2pF — 229)
DIELECTRIC
EIA Designation
CAPACITANCE TOLERANCE
G — C0G (NP0) — Ultra-Stable
D — ±0.5 pF
F — ±1%
G — ±2%
J — ±5%
K — ±10%
R — X7R — Stable
U — Z5U — General Purpose
M — ±20%
P — 0%, +100%
RATED VOLTAGE
Z — -20, +80%
2 — 200 F — 1500
1 — 100
5 — 50
C — 500
D —1000
G — 2000
Z — 2500
H — 3000
*Part Number Example: C320C102M1R5CA (14 digits – no spaces)
For packaging information, see pages 40, and 41.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
9
CERAMIC CONFORMALLY COATED/RADIAL
“STANDARD & HIGH VOLTAGE GOLDEN MAX”
OPTIONAL CONFIGURATIONS BY LEAD SPACING
The preferred lead wire configurations are shown on page 9. However, additional configurations are
available. All available options, including those on page 9, are shown below grouped by lead spacing.
C 3 1 5
C 3 1 6
C 3 2 0
C 3 2 4
C 3 2 6
.150
MAX.
.150
MAX.
.200
MAX.
.200
MAX.
.200
MAX.
Lead Spacing
.100" ± .030
.210
MAX.
.260
MAX.
.260
MAX.
.230
MAX.
.350
MAX.
.276
MIN.
.276
MIN.
.276
MIN.
.230
±.030
.230
± .030
.100
.200
.100
.200
.100
.125
.100
.100
C 3 1 7
C 3 1 8
C 3 2 2
C 3 2 3
.200
MAX.
.150
MAX.
.150
MAX.
.200
MAX.
Lead Spacing
.200" ± .030
.260
MAX.
.320
MAX.
.230
MAX.
.235
MAX.
.276
MIN.
.276
MIN.
.276
MIN.
.276
MIN.
.200
.200
.200
.200
C 3 2 5
C 3 2 7
C 3 2 8
.200
MAX.
.200
MAX.
.200
MAX.
Lead Spacing
.200" ± .030
.320
MAX.
.325
MAX.
.350
MAX.
.276
MIN.
.276
MIN.
.230
±.030
.200
.270
.200
.200
C 3 3 0
C 3 3 3
C 3 3 5
C 3 3 6
C 3 4 0
C 3 4 6
.400
MAX.
.400
MAX.
Lead Spacing
.300
MAX.
.300
MAX.
.300
MAX.
.200" ± .030
Note: C330 Shoulder
bend leads:
.460
MAX.
.450
MAX.
.590
MAX.
.420
MAX.
.390
MAX.
X7R/50V 683-105
Z5U/100V 683-334
.276
MIN.
.276
MIN.
.230
±.030
.230
±.030
.276
MIN.
.200
.300
.200
.320
.200
.200
.200
C 3 2 1
C 3 3 1
C 3 5 0
C 3 5 6
Lead Spacing
.250" ± .030
(Available in
bulk only)
.200
MAX.
.300
MAX.
Lead Spacing
.400" ± .030
(Available in
bulk only)
.500
MAX.
.500
MAX.
.360
.560
.670
MAX.
.260
MAX.
MAX.
MAX.
.276
MIN.
.276
MIN.
.276
MIN.
.230
±.030
.400
.520
.250
.250
.400
Note: Non-standard lead lengths are available in bulk only.
10
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CONFORMALLY COATED/RADIAL
“STANDARD & HIGH VOLTAGE GOLDEN MAX”
CAPACITOR MARKINGS
Rated Voltage
Dielectric
C0
Manufacturer
(KEMET)
Manufacturer
(KEMET)
Manufacturer
(KEMET)
Manufacturer
(KEMET)
Capacitance
Tolerance
K
KX7R
105K
100V
0212
Front
K1K
Back
102
K5U
104M
Dielectric
Capacitance
& Tolerance
Rated Voltage
5 50 vols
Rated
Voltage
Capacitance
Code
Date Code
Capacitance
Tolerance
Capacitance
Code
C31X & C32X Size
C33X Size
C340 & C350 Size
RATINGS & PART NUMBER REFERENCE: ULTRA-STABLE TEMPERATURE CHARACTERISTICS – C0G/NPO
Style
C31X
WVDC
C32X
WVDC
C34X
WVDC
C35X
WVDC
C33X
WVDC
Cap Cap
Code Tol
Cap
50 100 200
500
1k
50 100 200
500
1k 1.5k 2k 50 100 200
500
1k 1.5k 2k 2.5k 3k 50 100 200
500
1k 2k 3k 50 100 200 500
1k 2k 3k
1.0pF
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
109
119
129
139
159
169
189
209
229
249
279
309
339
369
399
439
479
519
569
629
689
759
829
919
100
110
120
130
150
160
180
200
220
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
J,K
J,K
J,K
J,K
J,K
J,K
J,K
J,K
J,K
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
240 G,J,K
270 G,J,K
300 G,J,K
330 G,J,K
360 G,J,K
390 G,J,K
430 G,J,K
470 G,J,K
510 G,J,K
51
56
62
68
75
82
91
560
620
680
750
820
910
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
For packaging information, see pages 40 and 41.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
11
CERAMIC CONFORMALLY COATED/RADIAL
“STANDARD & HIGH VOLTAGE GOLDEN MAX”
RATINGS & PART NUMBER REFERENCE: ULTRA-STABLE TEMPERATURE CHARACTERISTICS — C0G/NPO CONT.
Style
C31X
WVDC
C32X
WVDC
C34X
WVDC
C35X
WVDC
C33X
WVDC
Cap Cap
Code Tol
Cap
50 100 200
500
1k
50 100 200
500
1k 1.5k 2k 50 100 200
500
1k 1.5k 2k 2.5k 3k 50 100 200
500
1k 2k 3k 50 100 200 500
1k 2k 3k
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
9100
101
111
121
131
151
161
181
201
221
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
112
122
132
152
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
F,G,J
.010uF 103
.015
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.10
123
153
183
223
273
333
393
473
563
683
823
104
124
.12
For packaging information, see pages 40 and 41.
12
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CONFORMALLY COATED/RADIAL
“STANDARD & HIGH VOLTAGE GOLDEN MAX”
RATINGS & PART NUMBER REFERENCE: STABLE TEMPERATURE CHARACTERISTICS — X7R
Style
Cap
C31X
C32X
C33X
C34X
C35X
WVDC
WVDC
WVDC
WVDC
WVDC
Cap
Code
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
395
475
565
685
Cap
50 100 200 500 1k 50 100 200 500 1k 1.5k 2k 50 100 200 500 1k 1.5k 2k 2.5k 3k 50 100 200 500 1k 2k 3k 50 100 200 500
1k
2k 3k
Tol
10pF
12
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
.010uF
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.10
#
#
.12
.15
.18
.22
.27
.33
.39
.47
.56
.68
.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
C330 shoulder bend lead configuration is standard for these cap codes.
X7R Dielectric--extended range value--Cap and DF measured @0.5Vrms.
#
For packaging information, see pages 40 and 41.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
13
CERAMIC CONFORMALLY COATED/RADIAL
“STANDARD & HIGH VOLTAGE GOLDEN MAX”
RATINGS & PART NUMBER REFERENCE
GENERAL PURPOSE TEMPERATURE CHARACTERISTIC – Z5U
Style
C31X
C32X
C33X
C34X
C35X
WWDC
WWDC
WWDC
WWDC
WWDC
Cap
Code
Cap
Tol
Cap
50
100
200
50
100
200
50
100
200
50
100
200
50
100
200
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
395
475
565
685
1000pF
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
.010uF
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.10
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
M,P,Z
.12
.15
.18
.22
.27
.33
.39
.47
.56
.68
.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
C330 shoulder bend lead configuration is standard for these cap codes.
For packaging information, see pages 40 and 41.
14
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC LEADED
PACKAGING INFORMATION
Ceramic Axial
Lead Tape and Reel Packaging
Figure 1
KEMET offers standard reeling of Molded and Conformally
Coated Axial Leaded Ceramic Capacitors for automatic insertion
or lead forming machines per EIA specification RS-296. KEMET’S
internal specification four-digit suffix, 7200, is placed at the end of
the part number to designate tape and reel packaging, ie:
C410C104Z5U5CA7200.
®
KEMET
Paper (50 lb.) test minimum is inserted between the layers of
capacitors wound on reels for component pitch ≤ 0.400".
Capacitor lead length may extend only a maximum of .0625"
(1.59mm) beyond the tapes' edges. Capacitors are centered in a
row between the two tapes and will deviate only ± 0.031
(0.79mm) from the row center. A minimum of 36" (91.5 cm) leader
tape is provided at each end of the reel capacitors. Universal
splicing clips are used to connect the tape. Standard reel
quantities are shown on page 41.
®
KEMET
Adhesive Tape
Adhesive Tape
Kraft Paper
Interleaving
Figure 2
Figure 3
10.5" - 14"
(26.67 -
35.56cm)
.059" to .315"
Greater Than
Component
Length
*
.047" Max
(1.20)
Hub
See Table 1 (A)
1
3 / "
4
*
(82.6)
.655" ±0.010"
(16.6 ±0.25)
1
/ "
8
.250" Nom.
(6.35)
(3.18)
See Table 1
(B)
Dimensions in Inches & (Millimeters)
Table 1
Component
Body Diameter
Component
Pitch "A"
Inside Tape Spacing "B"
± 1.5mm (0.059")
0.020" or (±0.5mm)
I
III*
0" (0mm) to 0.197" (5mm)
0.197" or (5mm)
0.394" or (10mm)
2.062" (52.4mm)
0.197" (5.01mm) to 0.394: (10mm)
2.874" (73mm)
* Not Available for Conformally Coated Parts.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
39
CERAMIC LEADED
PACKAGING INFORMATION
Ceramic Radial
Lead Tape and Reel Packaging
KEMET offers standard reeling of Molded and Conformally
Coated Radial Leaded Ceramic Capacitors for automatic
insertion per EIA specification RS-468. Parts are taped to a
tagboard carrier strip, and wound on a reel as shown in
Figure 1. Kraft paper interleaving is inserted between the
layers of capacitors on the reel. Ammopack is also available,
with the same lead tape configuration and package quantities.
Figure 1
®
KEMET
KEMET
Carrier Strip
12"
(30.48 cm)
.059" to .315"
Greater Than
Over All
*
Height
®
of Taped
Components
Adhesive Tape
Hub
1
Kraft Paper
Interleaving
Carrier Tape
3 / "
4
(82.6)
.655" ±0.010"
(16.6 ±0.25)
1
/ "
8
(3.18)
(Note: Non-standard lead lengths
available in bulk only.)
Figure 3: Standard Reel
C330**
C340**
C6xx#
CK06**
CK05**
C317**
C322**
C323**
C315*
C320*
C056**
C066**
CKR06** CKR05**
C6xx#
C333**
C062**
C052**
∆H
P
2
P
1MM Max.
(.039")
H1
D0
P1
W
2
H
F
H0
W
W
0
Tape
Carrier
W
2
L
1
T
* Lead spacings are 2.54mm
(.10") center-to-center.
P
0
** Lead spacings are 5.08mm
(.20") center-to-center.
Figure 2: Lead Tape Configuration (See Table Below)
# See page 15 for exact lead
configuration for Series.
Ceramic Radial Tape and Reel Dimensions in Millimeters & (Inches)
Nominal
mm (inch)
Tolerance
mm (inch)
Nominal
mm (inch)
Tolerance
mm (inch)
Dimension
Symbol
Dimension
Symbol
Sprocket Hole Diameter
Do
4.0 (.157)
12.7 (.500)
12.7 (.500)
± 0.2 (.008)
± 0.3 (.012)
± 0.3 (.012)
Height to Seating
Plane (formed leads) (2)
Component Alignment
H0
7301
7303
7301
7303
16.0 (.630) 18.0 (.709) ±0.5 (.020) Minimum
Sprocket Hole Pitch
Component Pitch
Lead Spacing (1)
P0
P
∆h
L1
t
4.0 (.157)
1.0 (.039)
0.7 (.051)
1.5 (.059)
18.0 (.709)
5.0 (.197)
3.0 (.118)
±0.2 (.008)
Maximum
±0.2 (.008)
Maximum
Lead Protrusion
Composite Tape
Thickness
Overall Tape and
Lead Thickness
Carrier Tape Width
F
5.08
(.20)
3.81
2.54
(.10)
5.08
+0.6 -0.2
(+.024 -.008)
± 0.7 (.028)
Sprocket Hole Center
to Lead Center (1)
Sprocket Hole Center
to Component Center
Height to Seating Plane
(straight leads) (2)
P1
P2
H
T
(.150)
(.200)
6.35 (.250)
± 1.3 (.051)
W
W0
W2
+1.0 - 0.5
(+.039 -.020)
Minimum
Hold-Down Tape
Width
Hold-Down Tape
Location
7301
7303
7301
7303
16.0 (.630) 18.0 (.709) ±0.5 (.020) Minimum
32.2 (1.27) Maximum
Component Height
Above Tape Center
H1
Maximum
(1) Measured at the egress from the carrier tape, on the component side.
(2) Determined by a 4 digit suffix placed at the end of the part number, as follows:
7301 =
7303 =
Recommended for parts with formed leads.
Recommended for parts with straight leads.
Example: C322C104K5R5CA7301
Example: C320C104K5R5CA7303
40
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC LEADED
PACKAGING INFORMATION
CERAMIC PACKAGING
Standard (1) Ammo Pack Maximum
KEMET
Series
Military
Style
Military
Specification
Reel
Size
Bulk
Quantity
Reel
Quantity
Maximum
Quantity
C114C-K-G
C124C-K-G
C192C-K-G
C202C-K
C222C-K
C052C-K-G
C062C-K-G
C114G
C124G
C192G
C202G
C222G
C052/56G
C062/66G
C512G
C522G
C114T
C124T
C192T
C202T
C222T
C052/56T
C062/66T
C31X
C32X
C33X
C340
C350
C410
C412
C420
C430
C440
C512
C522
C617
CK12, CC75
CK13, CC76
CK14, CC77
CK15
MIL-C-11015/
MIL-PRF-20
200/Box
200/Box
100/Box
25/Box
5000
5000
3000
500
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
N/A
N/A
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
N/A
12"
12"
12"
12"
12"
N/A
N/A
CK16
10/Tray
300
CK05, CC05
CK06, CC06
CCR75
CCR76
CCR77
CC78-CCR78
CC79-CCR79
CCR05
100/Bag
100/Bag
200/Box
200/Box
100/Box
25/Box
2000
1500
2000
1500
5000
5000
3000
500
MIL-PRF-20
10/Tray
300
100/Bag
100/Bag
Footnote (2)
Footnote (2)
200/Box
200/Box
100/Box
25/Box
1700
1500
N/A
CCR06
CC07-CCR07
CC08-CCR08
CKR11
CKR12
CKR14
CKR15
CKR16
CKR05
CKR06
N/A
MIL-PRF-39014
5000
5000
3000
500
10/Tray
300
100/Bag
100/Bag
500/Bag
500/Bag
250/Bag
100/Bag
50/Bag
300/Box
200/Box
300/Box
200/Box
200/Box
Footnote (2)
Footnote (2)
500/Bag
500/Bag
500/Bag
250/Bag
250/Bag
100/Bag
100/Bag
100/Bag
50/Bag
1700
1500
2500
2500
1500
1000
N/A
5000
5000
5000
2500
2500
N/A
2500
2500
1500
1000
N/A
4000
4000
4000
2000
2000
N/A
N/A
N/A
N/A
N/A
C622/C623
C627/C628
C630/C631
C637/C638
C640/C641
C642/C643
C647/C648
C657/C658
C667/C668
50/Bag
NOTE: (1) Standard packaging refers to number of pieces per bag, tray or vial.
(2) Quantity varies. For further details, please consult the factory.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
41
C315C229J1G5TA 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
C315C229J1R5CA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 | |
C315C229J1R5HA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 | |
C315C229J1R5TA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 | |
C315C229J1U5CA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 | |
C315C229J1U5HA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 | |
C315C229J1U5TA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 | |
C315C229J2G5CA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 | |
C315C229J2G5HA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 | |
C315C229J2G5TA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 | |
C315C229J2R5CA | KEMET | MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED | 获取价格 |
C315C229J1G5TA 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6