首页 > C44HKGP6100ZASJ

C44HKGP6100ZASJ

更新时间：2024-09-18 21:58:56

品牌：KEMET

描述：C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter

PDF下载

中文翻译

PCB计价

概述
数据手册

如果您发现信息不准确，欢迎纠错

C44HKGP6100ZASJ 概述

C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter

C44HKGP6100ZASJ 数据手册

通过下载C44HKGP6100ZASJ数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载

Aluminum Can Power Film Capacitors

C44H Series, 330 – 440 VAC, 700 – 1,000 VDC,

for PFC and AC Filter

Overview

Applications

The C44H Series are a polypropylene metallized ﬁlm with

cylindrical aluminium can type ﬁlled with liquid resin, screw

terminals, plastic deck and overpressure safety device.

Typical applications include commutation, power factor

correction and AC harmonic ﬁltering.

Beneﬁts

• Overpressure safety device

• High peak current capability

• Long lifetime

• Self-healing

Part Number System

C44H

Series

6100

Case & Fixing

Bolt Code

Rated Voltage

Terminal Style Capacitance Code (pF) Internal Code

Internal Code

Tolerance

C44H = MKP

Capacitors for K = 440 V_rms

L = 330 V_rms

G = Cylindrical P = M6

Digits 9-11 indicate the A = Standard

Z = Special

J = 5%

K = 10%

aluminum

Threaded Posts ﬁrst three digits of the

AC ﬁltering

case with M12 R = M10

capacitance value.

Digit 8 indicates the

number of zeros to be

added.

bolt

Threaded Posts

It is not possible to manufacture every part number which could be created from coding description. Please refer to table of standard part numbers and

ask KEMET for other possibilities.

One world. One KEMET

F3054_C44H_RADIAL • 9/20/2016

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44H Series, 330 – 440 VAC, 700 – 1,000 VDC, for PFC and AC Filter

Dimensions – Millimeters

Diameter

Ø = 65

22.5

12.5

Ø ≥ 75

All dimensions are in mm

Maximum Driving Torque

Terminals M6

5 [N*m]

Terminals M10

Bolt M12

8 [N*m]

12 [N*m]

F3054_C44H_RADIAL • 9/20/2016

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44H Series, 330 – 440 VAC, 700 – 1,000 VDC, for PFC and AC Filter

General Technical Data

Reference Standards

Dielectric

IEC 61071

Polypropylene ﬁlm

Non-inductive type winding

25/70/56 – IEC 60068-1

Climatic Category

Maximum hot spot temperature

Endurance Test IEC 61071

Installation

+75°C

+65°C @ Case Temperature

Whatever position

Self extinguishing UL94 V0 plastic deck

Electrical Characteristics

Rated Voltage

Surge Voltage

U_rms= (see table) VAC

Us = (see table) VDC

±5% or ±10%

Capacitance Tolerance

Dissipation Factor PP typical

≤ 0.0002 at 25°C

(tgδ0)

Annual average ≤ 80% at 24°C

On 30 days/year permanently 100%. on other days occasionally

90%.

Relative Humidity

Dewing not admitted

Capacitance deviation in

temperature range (-40 +50°C)

±1.5% maximum on capacitance value at 20°C

Life Expectancy

Capacitance drop at end of life

Failure Rate IEC 61709

100,000 hours @ V_RMSwith T_HS≤ 70°C

- 5% (typical)

See FIT Graph

Test Methods

Test voltage term to term (Utt)

Test voltage term to case (Utc)

Damp Heat

1.5 x V_RMSfor 10 seconds at 25°C

3,600 V ~ 50 Hz for 10 seconds

IEC 60068-2-78

Change of Temperature

Vibration Strength

IEC 60068-2-14

IEC 60068-2-6

NOTICE: Care should be taken to ensure that there still is electrical clearance of 15 mm between terminations and other live or earthed parts above the

capacitor, in case of safety device activation.

F3054_C44H_RADIAL • 9/20/2016

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44H Series, 330 – 440 VAC, 700 – 1,000 VDC, for PFC and AC Filter

Table 1 – Ratings & Part Number Reference

Cap

Value

(µF)

Rth

hs/amb

°C/W

V_rms

Irms

ESL <

Case

dV/dt

(V/µs)

Part Number

VAC

VDC

100

200

300

400

500

600

100

133

150

200

250

330

440

700

1050

1500

12.5

100

120

160

170

180

145

155

170

160

175

190

3.4

1.7

1.6

2.3

2.1

1.9

4.1

3.3

1.9

1.8

2.7

2.4

C44HLGP6100AASJ

C44HLGR6200AASJ

C44HLGR6300AASJ

C44HLGR6400AASJ

C44HLGR6500AASJ

C44HLGR6600AASJ

C44HKGR6100AASJ

C44HKGR6133AASJ

C44HKGR6133ZASJ

C44HKGR6150AASJ

C44HKGR6200AASJ

C44HKGR6250AASJ

6.1

3.6

2.7

2.6

4.5

3.8

117

194

242

142

194

242

700

1000

2.8

Cap

Value

dV/dt

(V/µs)

Rth hs/amb

ºC/W

VAC

VDC

Irms

ESL

Case

Part Number

¹Maximum admissible RMS current T_HS≤ 70°C.

F3054_C44H_RADIAL • 9/20/2016

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44H Series, 330 – 440 VAC, 700 – 1,000 VDC, for PFC and AC Filter

Lifetime Expectancy/Failure Quota Graphs

Power Losses and Hot Spot Temperature Calculation

At each frequency, the Power Losses are the sum of:

1. Dielectric Power Losses

Lifetime curve C44H series

Hot Spot

temperature

[°C]

1,40

P_D(f_i) = 2 * π * f_i* C * V(f_i)²* tgδ₀

1,30

≤60°C

1,20

which can be alternatively calculated as

70°C

1,10

I(f_i)²

1,00

P_D(f_i) =

* tgδ₀

75°C

2 * π * f_i* C

0,90

0,80

0,70

0,60

where: tgδ₀= 2 * 10^-4

2. Joule Power Losses:

P_J(f_i) = Rs * I(f_i)²

100

1.000

10.000

100.000

1.000.000

Lifetime Expectancy [h]

The Total Power Losses are the sum of the components at each frequency:

P =

[

(

f_i

)

+ P

f_i

( )

]

∑

The Thermal Jump in the Hot Spot is:

ΔT_HS= P_T* R_th-hs

V = Operating Voltage [VAC]

_rms= Rated Voltage [VAC]

The Hot Spot Temperature is:

_HS= T_a+ ΔT_HS

FIT @ Hot Spot Temperatures

Limits for the formulas

≤60

The limits listed below should not be exceeded:

1000

100

V ( f )²≤V

∑

RMS

I( f )²≤ I

∑

_HS=T_a+ ΔT_HS≤ (T_HS)

MAX

Where T_ais the ambient temperature (steady state temperature of the

cooling air ﬂowing around the capacitor, measured at 100 mm of distance

from the capacitor and at a height of 2/3 height of the capacitor).

0,6

0,7

0,8

0,9

1,1

Voltage Ratio [U/Urms]

3. Maximum case temperature (T_CASE) ≤ 70°C

I_RMS= √(13.8²+ 27²) = 30 ≤ 30 → Admitted

Example of calculation

Part Number: C44HKGR6100AASJ

_RMS= √(440²+ 6.1²) = 440 ≤ 440 → Admitted

P_D(50) = 2 * π * 50 * 100 * 10^-6* 440²* 2 * 10^-4= 1.22 [W]

P_D(7000) = [27²/(2 * π * 7000 * 100 * 10^-6)] * 2 * 10^-4= 0.03 [W]

P_J(50) = 3.5 * 10^-3* [(2 *π * 50 * 100 * 10^-6* 440)²] = 0.67 [W]

P_J(7000) = 3.5 * 10^-3* 27²= 2.55 [W]

Rated V_RMS= 440 [V_RMS

Rated I_RMS= 30 [A]

R_s= 4.1 [mΩ]

]

R_th= 5.0 [°C/W]

P_T= 1.22 + 0.03 + 0.78 + 3 = 5 [W]

ΔT_HS= 5 * 5 = 25 [°C]

T_HS= Ta + ΔT_HS

T_HS= 35 + 25 = 60 [°C] → OK since hot spot temperature is less

than maximum admitted

Expected Life @ T_HS= 70°C → 100,000 hours (see lifetime curve)

Expected Life @ T_HS= 60°C → 140,000 hours (see lifetime curve)

Fundamental Frequency F₁= 50 [Hz]

Ripple Frequency F₂= 7000 [Hz]

Fundamental Voltage V₁= 440 [V~]

Ripple Current I₂= 27 [A]

T_a= 35°C

I₁= I(50) = 2 * π * 50 * 100 * 10^-6* 440 = 13.8 [A]

V₂= V(7000) = [27/(2 * π * 7000 * 100 * 10^-6)] = 6.14 [V]

F3054_C44H_RADIAL • 9/20/2016

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44H Series, 330 – 440 VAC, 700 – 1,000 VDC, for PFC and AC Filter

Marking

Dissipation Factor

Dissipation factor is a complex function involved with the inefﬁciency of the capacitor. The tgδ may change up and down

with increased temperature. For more information, please refer to Performance Characteristics.

Sealing

Hermetically Sealed Capacitors

When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can

cause a breach in the capacitor which can result in leakage, impregnation, ﬁlling ﬂuid or moisture susceptibility.

Resin Encased/Wrap & Fill Capacitors

The resin seals on resin encased and wrap and ﬁll capacitors will withstand short-term exposure to high humidity

environments without degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and

chemicals. These case materials are somewhat porous and through osmosis can cause contaminants to enter the capacitor.

The second area of contaminated absorption is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires,

there can be a path formed up to the lead wire into the capacitor section. Aqueous cleaning of circuit boards can aggravate

this condition.

Barometric Pressure

The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the

barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected

by internal stresses due to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well

as low insulation resistance. Heat transfer can also be affected by altitude operation. Heat generated in operation cannot be

dissipated properly and can result in high RI2 losses and eventual failure.

Radiation

Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric

embitterment can take place causing shorts or opens.

F3054_C44H_RADIAL • 9/20/2016

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44H Series, 330 – 440 VAC, 700 – 1,000 VDC, for PFC and AC Filter

Environmental Compliance

As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental

effects of both our capacitors and their production.

In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the

use of some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help

our customers' obligations to guarantee their products to fulﬁll these legislative requirements. The only material of concern

in our products has been Lead (Pb), which has been removed from all designs to fulﬁll the requirement of containing less

than 0.1% of Lead in any homogeneous material.

KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever

needed.

Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode

coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels

for RoHS compatible capacitors.

Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on

the label.

All KEMET power ﬁlm products are RoHS Compliant.

Materials & Environment

The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and

constant attention to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out

statistical analysis on the materials purchased before acceptance. All materials are, to the company's present knowledge,

non-toxic and free from Cadmium, Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine

Dioxins Bromurate Clorurate, CFC and HCFC and Asbestos.

Green Products

All KEMET power ﬁlm products are ROHS Compliant.

Insulation Resistance

When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity.

Low insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to

excessive humidity.

F3054_C44H_RADIAL • 9/20/2016

Power and AC Film Capacitors – Aluminum Can Power Film Capacitors

C44H Series, 330 – 440 VAC, 700 – 1,000 VDC, for PFC and AC Filter

KEMET Electronic Corporation Sales Ofﬁces

For a complete list of our global sales ofﬁces, please visit www.kemet.com/sales.

Disclaimer

All product speciﬁcations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for

checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such

applications, but are not intended to constitute – and KEMET speciﬁcally disclaims – any warranty concerning suitability for a speciﬁc customer application or use.

The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no

obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component

failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards

(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or

property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other

measures may not be required.

Prototype Sample Disclaimer

The Customer acknowledges the following limitations of the prototype samples:

(1) Prototype samples are manufactured from preliminary designs and manufacturing processes; may not represent ﬁnal designs; have not been

released for commercial use and are not subject to the same quality control procedures applicable to released products.

(2) Prototype samples are not qualiﬁed parts and are provided “as-is” by KEMET Electronics Corporation, which speciﬁcally disclaims any and all

warranties and guarantees, explicit or implied, including, without limitation, the warranties of merchantability and ﬁtness for a particular purpose or use.

(3) Prototype samples are not intended for commercial use; are provided for engineering evaluation only and are not recommended for use in the

Customer’s production line.

(4) The Customer assumes the risk ofany and alluses that the Customer makes of the prototype samples.

General Disclaimer

“All product speciﬁcations, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee,

warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical

operating conditions for such applications, but are not intended to constitute – and we speciﬁcally disclaim – any warranty concerning suitability for

a speciﬁc customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to

determine the correct products for their application.

KEMET’s product warranty is set forth at www.kemet.com under Terms and Conditions of Sale.”

KEMET is a registered trademark of KEMET Electronics Corporation.

F3054_C44H_RADIAL • 9/20/2016

C44HKGP6100ZASJ 相关器件

型号	制造商	描述	价格	文档
C44HKGP6100ZASK	KEMET	C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter	获取价格
C44HKGR6100AASJ	KEMET	Film Capacitor, Polypropylene, 1000V, 5% +Tol, 5% -Tol, 100uF, Stud Mount	获取价格
C44HKGR6100AASK	KEMET	C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter	获取价格
C44HKGR6100ZASJ	KEMET	C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter	获取价格
C44HKGR6100ZASK	KEMET	C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter	获取价格
C44HLGP6100AASJ	KEMET	C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter	获取价格
C44HLGP6100AASJ_17	KEMET	Film, Metallized Polypropylene, AC Filter, C44H, 100 uF, 5%, 700 V, 330 V	获取价格
C44HLGP6100AASK	KEMET	C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter	获取价格
C44HLGP6100ZASJ	KEMET	C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter	获取价格
C44HLGP6100ZASK	KEMET	C44H Series, 330 - 440 VAC, 700 - 1,000 VDC, for PFC and AC Filter	获取价格