C4AEOBU4270A1XJ [KEMET]
Film Capacitor, Polypropylene, 900V, 5% +Tol, 5% -Tol, 2.7uF, Through Hole Mount, RADIAL LEADED;型号: | C4AEOBU4270A1XJ |
厂家: | KEMET CORPORATION |
描述: | Film Capacitor, Polypropylene, 900V, 5% +Tol, 5% -Tol, 2.7uF, Through Hole Mount, RADIAL LEADED 电容器 |
文件: | 总11页 (文件大小:1324K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC,
for DC Link
Overview
Applications
The C4AE Series is a polypropylene metallized film with
rectangular plastic box type filled with resin (white and grey
color) and 2 or 4 tinned copper wires.
Typical applications include DC filtering and energy storage.
Benefits
• Self-healing
• Low losses
• High ripple current
• High capacitance density
• High contact reliability
• Suitable for high frequency applications
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
C4
A
E
Q
B
W
5270
A
3
N
J
Rated
Lead
Terminals
Code
Capacitance
Code (pF)
Size Code:
B x H x L (mm)
Series
Type
Application Voltage
Case
C-Spec Diameter
Tolerance
(VDC)
(mm)
C4 =
MKP
Power
A =
Box,
Wire
E =
DC Link
G = 450
H = 600
J = 700
O = 900
Q = 1,100
B =
Box,
Plastic
Case
U = 2 pins
Digits two –
A =
1 = 0.8
W = 11 x 20x 31.5
X = 13 x 25 x 31.5
Y = 14 x 28 x 31.5
1 = 19 x 29 x 31.5
2 = 22 x 37 x 31.5
F = 20 x 40 x 42
J = 28 x 37 x 42
L = 30 x 45 x 42
M = 30 x 45 x 57.5
N = 35 x 50 x 57.5
J = 5%
K = 10%
W = 4 pins four indicate Standard 2 = 1.0
the first three
digits of the
capacitance
value. First
digit indicates
the number
of zeros to be
added.
Grade
3 = 1.2
Capacitors Terminals
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017
1
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Dimensions – Millimeters
B
L
B
ꢀ
0ꢀ5
0ꢀ5
d
LL
p1
p
p
p
p
1
2pin
4pin
p
p1
B
H
L
LL
d
Size
Code
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
W
X
Y
1
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
52.5
52.5
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
11
13
14
19
22
20
28
30
30
35
+0.3
+0.3
+0.3
+0.3
+0.3
+0.4
+0.4
+0.4
+0.5
+0.5
20
25
28
29
37
40
37
45
45
50
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.3
+0.3
31.5
31.5
31.5
31.5
31.5
42.0
42.0
42.0
57.5
57.5
+0.5
+0.5
+0.5
+0.5
+0.5
+0.6
+0.6
+0.6
+0.8
+0.8
6
6
6
6
6
6
6
6
6
6
+0/−2
+0/−2
+0/−2
+0/−2
+0/−2
+0/−2
+0/−2
+0/−2
+0/−2
+0/−2
0.8
0.8
0.8
0.8
0.8
1.2
1.2
1.2
1.2
1.2
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
2
F
10.2
10.2
20.3
20.3
20.3
±0.4
±0.4
±0.4
±0.4
±0.4
J
L
M
N
Qualification
Reference Standards
Climatic Category
IEC 61071, EN61071, VDE0560
40/85/56 according to IEC
60068–1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017
2
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
General Technical Data
Dielectric
Application
Polypropylene metallized film - non inductive self-healing
DC filtering/DC-Link
40/85/56 IEC 60068–1
+105°C
Climatic Category
Maximum Operating Temperature
Endurance Test
Standard
500h + 500h at 1.3 x VNDC at 85°C
IEC 61071 – EN61071 – VDE0560
Solvent resistant plastic case UL94 V–0
Thermosetting resin sealing UL94 V–0 compliant
Protection
Installation
Leads
Any position
Tinned copper wires – standard lead wire length 6(+0/−2) mm
Packed in cardboard trays with protection for the terminals
Packaging
Compliant with the restricted substance requirements of
Directive 2011/65/EU
RoHS Compliant
Electrical Characteristics
Rated Capacitance range
Rated Voltage (VNDC) range
Capacitance Tolerance
Dissipation factor (DF)
Surge voltage
1 to 130 µF
450 to 1,100 VDC
±5% (J) or ±10% (K) measured at T = +25°C
≤ 0.0002 at 10 kHz and +25°C (±5°C)
1.5 * VNDC for maximum 10 times in life time at 25°C
1.15 * VNDC for maximum 30 minutes – once per day
Overvoltage (IEC 61071)
1.3 * VNDC for maximum 1 minute - once per day
1.5 * IPKR - maximum 1,000 times in life time
Peak non Repetitive current
Insulation Resistance
IR x C ≥ 30.000 seconds at 100 VDC 1 minute (+25°C)
±1.5% maximum on capacitance value measured at (+25°C)
Capacitance deviation in operation
Annual average ≤ 70%; 85% on 30 days/year randomly
distributed throughout the year. Dewing not admissible
Permissible relative humidity
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017
3
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Life Expectancy
Life expectancy
Capacitance drop at end of life
Failure rate IEC 61709
100.000 hours at VNDC at Hot-Spot temperature THS = +85°C
−5% (typical)
300 FIT at VNDC at Hot-Spot temperature THS = +85°C
Test Method
Test voltage between terminals
1.5 * VNDC for 10 seconds or 1.65 * VNDC for 2 seconds, at +25°C
3.2 kVac 50 Hz for 2 seconds
Test voltage between terminals
and case
Damp Heat
IEC 60068–2–78
IEC 60068–2–14
Change of temperature
Operative Voltage Derating
Voltage (VDC)
Life Expectancy (hrs)
100,000
Operative Voltage at 70°C (THS)
Rated Voltage at 85°C (THS)
500
450
350
650
600
450
800
700
550
1,100
900
1,300
1,100
850
100,000
Operative Voltage at 105°C (THS)
700
2,000
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017
4
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Lifetime Expectancy/Failure Quota Graphs
Lifetime Curve VNDC = 450 V-
Lifetime Curve VNDC = 600 V- and VNDC = 700 V-
ꢄot Spot
ꢅemperature
ꢄot Spot
ꢅemperature
ꢆꢇCꢈ
ꢆꢇCꢈ
1ꢀ40
1ꢀ40
ꢉ0
ꢉ0
1ꢀꢃ0
1ꢀꢃ0
ꢁ5
ꢁ5
1ꢀ20
1ꢀ20
ꢂ0
ꢂ0
1ꢀ10
1ꢀ10
ꢂ5
ꢂ5
1ꢀ00
1ꢀ00
100
100
0ꢀꢂ0
0ꢀꢂ0
105
105
0ꢀꢁ0
0ꢀꢁ0
10
100
1,000
10,000
100,000 1,000,000
10
100
1,000
10,000
100,000 1,000,000
ꢀiꢁeꢂiꢃe Eꢄpeꢅꢂanꢅꢆ ꢇꢈꢉ
ꢀiꢁeꢂiꢃe Eꢄpeꢅꢂanꢅꢆ ꢇꢈꢉ
Lifetime Curve VNDC = 900 V- and VNDC = 1,100 V-
FIT at Hot Spot Temperatures
ꢄot Spot
ꢅemperature
ꢆot Spot
ꢇemperature
ꢈꢉCꢊ
ꢆꢇCꢈ
100,000
10,000
1,000
100
1ꢀ40
105
100
ꢃ5
ꢉ0
1ꢀꢃ0
ꢁ5
1ꢀ20
ꢂ0
1ꢀ10
ꢂ5
ꢃ0
1ꢀ00
100
ꢄ5
10
0ꢀꢂ0
105
ꢂ0
1
0ꢀꢁ0
0ꢀ5
0ꢀꢁ
0ꢀꢂ
0ꢀꢄ
0ꢀꢃ
1ꢀ0
1ꢀ1
1ꢀ2
1ꢀꢅ
10
100
1,000
10,000
100,000 1,000,000
ꢀꢁꢀꢂꢃC
ꢀiꢁeꢂiꢃe Eꢄpeꢅꢂanꢅꢆ ꢇꢈꢉ
Notes:
HS = TAMB + ΔT
ΔT = ESR * Irms2 * Rth
rms should be limited to values granting ΔT ≤ 30°C
T
I
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017
5
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental
effects of both our capacitors and the production of them.
In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the
use of some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help
our customers' obligations to guarantee their products to fulfill these legislative requirements. The only material of concern
in our products has been Lead (Pb), which has been removed from all designs to fulfill the requirement of containing less
than 0.1% of lead in any homogeneous material.
KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever
needed.
Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode
coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels
for RoHS compatible and Pb-Free capacitors.
Because of customer requirements, additional markings such as "LF" for lead-free or "LFW" for lead-free wires may appear
on the packaging label.
Materials & Environment
The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and
constant attention to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out
statistical analysis on the materials purchased before acceptance. All materials are, to the company's present knowledge,
non-toxic and free from cadmium, mercury, chrome and compounds, polychlorine triphenyl (PCB), bromide and chlorine
dioxins bromurate clorurate, CFC and HCFC, and asbestos.
Green Products
All KEMET power film products are ROHS Compliant.
Insulation Resistance
When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity.
Low insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to
excessive humidity.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017
6
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Dissipation Factor
Dissipation factor is a complex function involved with the inefficiency of the capacitor. The tgδ may change up and down
with increased temperature. For more information, please refer to Performance Characteristics.
Sealing
Hermetically Sealed Capacitors
When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can
cause a breach in the capacitor which can result in leakage, impregnation, filling fluid or moisture susceptibility.
Resin Encased/Wrap & Fill Capacitors
The resin seals on resin encased and wrap and fill capacitors will withstand short-term exposure to high humidity
environments without degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and
chemicals. These case materials are somewhat porous and through osmosis can cause contaminants to enter the capacitor.
The second area of contaminated absorption is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires,
there can be a path formed up to the lead wire into the capacitor section. Aqueous cleaning of circuit boards can aggravate
this condition.
Barometric Pressure
The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the
barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected
by internal stresses due to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well
as low insulation resistance. Heat transfer can also be affected by altitude operation. Heat generated in operation cannot be
dissipated properly and can result in high RI2 losses and eventual failure.
Radiation
Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric
embitterment can take place causing shorts or opens.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017
7
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Table 1 – Ratings & Part Number Reference
ESR
Irms*
Rth
Cap
Value VDC
(µF)
Dimensions (mm)
Ipkr ESL
dV/dt
(V/µs)
70°C at
10 kHz
70°C at
10 kHz
PART NUMBER
(HS/Amb)
(°C/W)
B
H
L
P
P1
Apk nH
mΩ
Arms
5.6
10
12.5
15
25
40
50
70
100
130
3.3
5.6
7
10
15
20
30
40
55
75
2.7
4
450
450
450
450
450
450
450
450
450
450
600
600
600
600
600
600
600
600
600
600
700
700
700
700
700
700
700
700
700
700
700
900
900
900
900
900
900
900
900
900
900
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
11
13
14
19
22
20
28
30
30
35
11
13
14
19
22
20
28
30
30
35
11
13
14
19
22
20
28
30
30
35
35
11
13
14
19
22
20
28
30
30
35
11
13
14
19
22
20
28
30
30
35
35
20
25
28
29
37
40
37
45
45
50
20
25
28
29
37
40
37
45
45
50
20
25
28
29
37
40
37
45
45
50
50
20
25
28
29
37
40
37
45
45
50
20
25
28
29
37
40
37
45
45
50
50
31.5
31.5
31.5
31.5
31.5
42
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
52.5
52.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
52.5
52.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
52.5
52.5
52.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
52.5
52.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
52.5
52.5
52.5
\
\
10
10
10
10
10
7
7
7
4
4
13
13
13
13
13
9
9
9
6
6
19
19
19
19
19
13
13
13
9
54
96
25
25
26
26
28
30
30
30
35
35
25
25
26
26
28
30
30
30
35
35
25
25
26
26
28
30
30
30
35
35
35
25
25
26
26
28
30
30
30
35
35
25
25
26
26
28
30
30
30
35
35
35
13.1
8.1
6.8
6
4.5
6.5
7.5
8.5
11.5
13.5
16
44
36
33
29
23
20
18
15
12
10
44
36
33
29
23
20
18
15
12
10
44
36
33
29
23
20
18
15
12
10
10
44
36
33
29
23
20
18
15
12
10
44
36
33
29
23
20
18
15
12
10
10
C4AEGBU4560A1WK
C4AEGBU5100A1XK
C4AEGBU5125A1YK
C4AEGBU5150A11K
C4AEGBU5250A12K
C4AEGBW5400A3FK
C4AEGBW5500A3JK
C4AEGBW5700A3LK
C4AEGBW6100A3MK
C4AEGBW6130A3NK
C4AEHBU4330A1WJ
C4AEHBU4560A1XJ
C4AEHBU4700A1YJ
C4AEHBU5100A11J
C4AEHBU5150A12J
C4AEHBW5200A3FJ
C4AEHBW5300A3JJ
C4AEHBW5400A3LJ
C4AEHBW5550A3MJ
C4AEHBW5750A3NJ
C4AEJBU4270A1WJ
C4AEJBU4400A1XJ
C4AEJBU4500A1YJ
C4AEJBU4800A11J
C4AEJBU5125A12J
C4AEJBW5150A3FJ
C4AEJBW5200A3JJ
C4AEJBW5300A3LJ
C4AEJBW5450A3MJ
C4AEJBW5550A3NJ
C4AEJBW5600A3NJ
C4AEOBU4150A1WJ
C4AEOBU4270A1XJ
C4AEOBU4330A1YJ
C4AEOBU4500A11J
C4AEOBU4800A12J
C4AEOBW5120A3FJ
C4AEOBW5140A3JJ
C4AEOBW5200A3LJ
C4AEOBW5300A3MJ
C4AEOBW5400A3NJ
C4AEQBU4100A1WJ
C4AEQBU4180A1XJ
C4AEQBU4220A1YJ
C4AEQBU4330A11J
C4AEQBU4500A12J
C4AEQBW4800A3FJ
C4AEQBW5100A3JJ
C4AEQBW5120A3LJ
C4AEQBW5200A3MJ
C4AEQBW5250A3NJ
C4AEQBW5270A3NJ
\
\
\
122
147
245
262
332
464
442
581
41
4.5
3.5
2.8
2.1
3
2.4
17
10.7
9
10.2
10.2
20.3
20.3
20.3
\
\
\
\
\
10.2
10.2
20.3
20.3
20.3
\
\
\
\
\
5.1
10.2
20.3
20.3
20.3
20.3
\
\
\
\
\
10.2
10.2
20.3
20.3
20.3
\
\
\
\
\
42
42
20.5
19
23
4
6
7
8.5
10.5
11
14
18
16.5
20.5
4
5.5
6
8
10
10
57.5
57.5
31.5
31.5
31.5
31.5
31.5
42
71
88
127
190
172
255
344
319
435
51
6.8
5.3
5.3
3.6
2.8
4.1
3.1
18.3
12.9
10.7
7.3
5.5
6.2
4.7
3.2
4.4
3.6
3.4
26.3
15.3
12.9
9.1
6.6
6.3
5.4
3.9
5.2
4
42
42
57.5
57.5
31.5
31.5
31.5
31.5
31.5
42
77
96
5
8
154
241
196
262
389
389
485
530
36
12.5
15
20
30
45
55
60
1.5
2.7
3.3
5
42
42
12.5
16.5
16
57.5
57.5
57.5
31.5
31.5
31.5
31.5
31.5
42
9
9
19
19.5
3.5
5
5.5
7
9.5
10
11.5
15
15
18
3
4.5
5
6.5
8.5
9
11
13
13
16
16.5
24
24
24
24
24
16
16
16
11
11
28
29
29
29
29
20
20
20
13
13
13
65
79
120
193
190
229
321
324
428
28
52
63
95
145
157
196
235
262
331
354
8
12
14
20
30
40
1
1.8
2.2
3.3
5
42
42
57.5
57.5
31.5
31.5
31.5
31.5
31.5
42
42
42
57.5
57.5
57.5
33.1
19.1
16
11.2
8.2
7.9
6.3
5.3
6.5
5.2
4.9
8
10.2
10.2
20.3
20.3
20.3
20.3
10
12
20
25
27
Cap Value
(µF)
dV/dt
(V/µs)
VDC
B
H
L
P
P1
Ipkr
ESL
ESR
Irms
Rth
Part Number
(*) Current value that leads to a ΔT of ~ 15°C in the Hot Spot → THS = TAMB + ΔT = 70°C + 15°C = 85°C
For Packaging quantities not listed contact KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017
8
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Construction
ꢀeꢁaiꢂeꢃ Crꢄꢅꢅ Seꢆꢁiꢄn
Sinꢂleꢀsided Metalliꢅed
Polꢄpropꢄlene Film
ꢆFirst Laꢄerꢇ
Molded Plastic
Case
Molded Plastic SelfꢀEꢁtinꢂuisꢃꢀ
Case
inꢂ Resin
Sinꢂleꢀsided Metalliꢅed
Polꢄpropꢄlene Film
ꢆSecond Laꢄerꢇ
Marꢂin
Marꢂin
Metal
Contact
Laꢄer
Metal
Contact
Laꢄer
Marꢂin
Leads
Winding Scheme
Sinꢀleꢁsided
Metalliꢂed
Polꢃpropꢃlene
Film
ꢈ Seꢉꢊiꢋn
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017
9
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
Marking
Dielectric ꢂꢃpe, Series
Manufacturerꢀs
Loꢁo
Capacitance, ꢂolerance
Rated Voltaꢁe
Climatic Cateꢁorꢃ
Selfꢆꢇealinꢁ
Dielectric
Date Code
ꢄnternal ꢅse
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
A
B
C
D
E
January
February
March
1
2
3
4
5
6
7
8
9
O
N
D
April
May
F
June
H
J
July
August
September
October
November
December
K
L
M
N
P
R
S
T
U
V
W
X
A
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017 10
Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors
C4AE Series, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link
KEMET Electronic Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3046_C4AE_RADIAL • 3/2/2017 11
相关型号:
C4AEOBU4330A1YJ
Film Capacitor, Polypropylene, 900V, 5% +Tol, 5% -Tol, 3.3uF, Through Hole Mount, RADIAL LEADED
KEMET
C4AEOBW5160A3HJ
Film Capacitor, Polypropylene, 900V, 5% +Tol, 5% -Tol, 16uF, Through Hole Mount, RADIAL LEADED-4, ROHS COMPLIANT
KEMET
C4AEOBW5200A3LJ
Film Capacitor, Polypropylene, 900V, 5% +Tol, 5% -Tol, 20uF, Through Hole Mount, RADIAL LEADED
KEMET
C4AEOBW5300A3MJ
Film Capacitor, Polypropylene, 900V, 5% +Tol, 5% -Tol, 30uF, Through Hole Mount, RADIAL LEADED
KEMET
©2020 ICPDF网 联系我们和版权申明