C640C109ZFR5TA
更新时间:2024-09-18 05:36:44
品牌:KEMET
描述:MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
C640C109ZFR5TA 概述
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED 多层陶瓷电容器/推力和径向引线
C640C109ZFR5TA 数据手册
通过下载C640C109ZFR5TA数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
Multilayer ceramic capacitors are available in a
variety of physical sizes and configurations, including
leaded devices and surface mounted chips. Leaded
styles include molded and conformally coated parts
with axial and radial leads. However, the basic
capacitor element is similar for all styles. It is called a
chip and consists of formulated dielectric materials
which have been cast into thin layers, interspersed
with metal electrodes alternately exposed on opposite
edges of the laminated structure. The entire structure is
fired at high temperature to produce a monolithic
block which provides high capacitance values in a
small physical volume. After firing, conductive
terminations are applied to opposite ends of the chip to
make contact with the exposed electrodes.
Termination materials and methods vary depending on
the intended use.
TEMPERATURE CHARACTERISTICS
Ceramic dielectric materials can be formulated with
a wide range of characteristics. The EIA standard for
ceramic dielectric capacitors (RS-198) divides ceramic
dielectrics into the following classes:
Class III: General purpose capacitors, suitable
for by-pass coupling or other applications in which
dielectric losses, high insulation resistance and
stability of capacitance characteristics are of little or
no importance. Class III capacitors are similar to Class
II capacitors except for temperature characteristics,
Class I: Temperature compensating capacitors,
suitable for resonant circuit application or other appli-
cations where high Q and stability of capacitance char-
acteristics are required. Class I capacitors have
predictable temperature coefficients and are not
effected by voltage, frequency or time. They are made
from materials which are not ferro-electric, yielding
superior stability but low volumetric efficiency. Class I
capacitors are the most stable type available, but have
the lowest volumetric efficiency.
which are greater than
15%. Class III capacitors
have the highest volumetric efficiency and poorest
stability of any type.
KEMET leaded ceramic capacitors are offered in
the three most popular temperature characteristics:
C0G: Class I, with a temperature coefficient of 0
30 ppm per degree C over an operating
temperature range of - 55°C to + 125°C (Also
known as “NP0”).
X7R: Class II, with a maximum capacitance
change of 15% over an operating temperature
range of - 55°C to + 125°C.
Z5U: Class III, with a maximum capacitance
change of + 22% - 56% over an operating tem-
perature range of + 10°C to + 85°C.
Class II: Stable capacitors, suitable for bypass
or coupling applications or frequency discriminating
circuits where Q and stability of capacitance char-
acteristics are not of major importance. Class II
capacitors have temperature characteristics of 15%
or less. They are made from materials which are
ferro-electric, yielding higher volumetric efficiency but
less stability. Class II capacitors are affected by
temperature, voltage, frequency and time.
Specified electrical limits for these three temperature
characteristics are shown in Table 1.
SPECIFIED ELECTRICAL LIMITS
TEMPERATURE CHARACTERISTICS
PARAMETER
C0G
X7R
Z5U
Dissipation Factor: Measured at following conditions:
C0G — 1 kHz and 1 vrms if capacitance > 1000 pF
1 MHz and 1 vrms if capacitance ≤ 1000 pF
X7R — 1 kHz and 1 vrms* or if extended cap range 0.5 vrms
Z5U — 1 kHz and 0.5 vrms
0.15%
2.5%
4.0%
Dielectric Strength: 2.5 times rated DC voltage.
Pass Subsequent IR Test
Insulation Resistance (IR): At rated DC voltage,
whichever of the two is smaller
1,000 MΩ-µF
or 100 GΩ
1,000 MΩ-µF
or 100 GΩ
1,000 MΩ-µF
or 10 GΩ
Temperature Characteristics: Range, °C
Capacitance Change without
DC voltage
-55 to +125
30 ppm/°C
-55 to +125
15%
+10 to +85
+22%, -56%
0
* 1 MHz and 1 vrms if capacitance ≤ 100 pF on military product.
Table I
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
3
CERAMIC CONFORMALLY COATED/AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS FOR STANDARD AND HIGH VOLTAGE
GENERAL SPECIFICATIONS
Working Voltage:
ENVIRONMENTAL
Vibration:
Axial (WVDC)
Radial (WVDC)
EIA RS-198, Method 304, Condition D (10-2000Hz; 20g)
Shock:
EIA RS-198, Method 305, Condition I (100g)
C0G – 50 & 100
X7R – 50 & 100
Z5U – 50 & 100
50, 100, 200, 500, 1k, 1.5k, 2k, 2.5k, 3k
50, 100, 200, 500, 1k, 1.5k, 2k, 2.5k, 3k
50 & 100
Life Test:
EIA RS-198, Method 201, Condition Dꢀ
?ꢀ200V
Temperature Characteristics:
C0G – 0 30 PPM / °C from - 55°C to + 125°C (1)
X7R – 15% from - 55°C to + 125°C
Z5U – + 22% / -56% from + 10°C to + 85°C
C0G – 200% of rated voltage @ +125°C
X7R – 200% of rated voltage @ +125°C
Z5U – 200% of rated voltage @ +85°C
Capacitance Tolerance:
Oꢀ500V
C0G – rated voltage @ +125°C
X7R – rated voltage @ +125°C
C0G – 0.5ꢀp, 1%, 2%, 5%, 10%
X7R – 10%, 20%, +80% / -20%, +100% / -0%
Z5U – 20%, +80% / -20%
Post Test Limits @ 25°C are:
Capacitance Change:
Construction:
Epoxy encapsulated - meets flame test requirements of UL
Standard 94V-0.
C0G (? 200V) – +3% or 0.25ꢀp, whichever is greater.
C0G (O 500V) – +3% or 0.50ꢀp, whichever is greater.
X7R – + 20% of initial value (2)
High-temꢀerature solder - meets EIA RS-198, Method 302,
Condition B (260°C for 10 seconds)
Z5U – + 30% of initial value (2)
Dissipation Factor:
Lead Material:
100% matte tin (Sn) with nickel (Ni) underꢀlate and steel core.
C0G – 0.15% maximum
X7R – 2.5% maximum
Z5U – 4.0% maximum
Insulation Resistance:
Solderability:
EIA RS-198, Method 301, Solder Temperature: 230°C ±±°Cꢀ
Dwell time in solder = 7 ½ seconds.
C0G – 10k Megohm or 100 Megohm x µp, whichever is less.
O1kV tested @ 500V.
X7R – 10k Megohm or 100 Megohm x µp, whichever is less.
O1kV tested @ 500V.
Z5U – 1k Megohm or 100 Megohm x µp, whichever is less.
Terminal Strength:
EIA RS-198, Method 303, Condition A (2ꢀ2kg)
Moisture Resistance:
ELECTRICAL
Capacitance @ 25°C:
EIA RS-198, Method 204, Condition A (10 cycles without
applied voltageꢀ)
Post Test Limits @ 25°C are:
Within specified tolerance and following test conditionsꢀ
C0G – > 1000ꢀp with 1.0 vrms @ 1 kHz
? 1000ꢀp with 1.0 vrms @ 1 MHz
X7R – with 1.0 vrms @ 1 kHz
Capacitance Change:
C0G (? 200V) – +3% or 0.25ꢀp, whichever is greater.
C0G (O 500V) – +3% or 0.50ꢀp, whichever is greater.
X7R – + 20% of initial value (2)
Z5U – with 1.0 vrms @ 1 kHz
Z5U – + 30% of initial value (2)
Dissipation Factor:
Dissipation Factor @ 25°C:
Same test conditions as capacitanceꢀ
C0G – 0.15% maximum
C0G – 0.25% maximum
X7R – 3.0% maximum
X7R – 2.5% maximum
Z5U – 4.0% maximum
Z5U – 4.0% maximum
Insulation Resistance:
C0G – 10k Megohm or 100 Megohm x µp, whichever is less.
?500V test @ rated voltage, O1kV test @ 500V.
X7R – 10k Megohm or 100 Megohm x µp, whichever is less.
O500V test @ rated voltage, >1kV test @ 500V.
Z5U – 1k Megohm or 100 Megohm x µp, whichever is less.
Insulation Resistance @ 25°C:
EIA RS-198, Method 104, Condition A <1kV
C0G – 100k Megohm or 1000 Megohm x µp, whichever is less.
?500V test @ rated voltage, O1kV test @ 500V
X7R – 100k Megohm or 1000 Megohm x µp, whichever is less.
?500V test @ rated voltage, O1kV test @ 500V
Z5U – 10k Megohm or 1000 Megohm x µp, whichever is less.
Thermal Shock:
EIA RS-198, Method 202, Condition B (C0G & X7R: -±±°C to
+12±°C); Condition A (Z±U: -±±°C to 8±°C)
Dielectric Withstanding Voltage:
EIA RS-198, Method 103
?200V test @ 250% of rated voltage for 5 seconds with current
limited to 50mA.
(1)+53
PPM
and
-30
PPM/
°C
from
+25°C
aging
to
-55°C,
+
60
10ꢀp.
500V test @ 150% of rated voltage for 5 seconds with current
limited to 50mA.
(2)X7R
Z5U
dielectrics
exhibit
characteristics;
there
fore, it is highly recommended that caꢀacitors be deaged for 2
hours at 150°C and stabilized at room temꢀerature for 48
hours before caꢀacitance measurements are made.
O1000V test @ 120% of rated voltage for 5 seconds with current
limited to 50mA.
4
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CONFORMALLY COATED/RADIAL
HIGH VOLTAGE “GOLDEN MAX”
CAPACITOR OUTLINE DRAWING
L
L
C617
C622
C627
C630
C637
C640
C642
C647
C657
C667
C623
C628
C631
C638
C641
C643
C648
C658
C668
H
*
H
D
D
*
S
S
* .276 (7.00) Min.
DIMENSIONS - INCHES AND MILLIMETERS
Case
Size
L MAX
inches (mm)
H MAX
inches (mm)
T MAX.
inches (mm)
Lead Spacing
inches (mm)
LD (Nominal)
inches (mm)
C617
.250 (6.35)
.320 (8.13)
.370 (9.40)
.450 (11.40)
.470 (11.90)
.550 (14.00)
.500 (12.70)
.570 (14.50)
.670 (17.02
.770 (19.56)
.220 (5.59)
.280(7.11)
.200 (5.08)
.250 (6.35)
.250 (6.35)
.200 (5.08)
.270 (6.89)
.250 (6.35)
.200 (5.08)
.270 (6.89)
.270 (6.89)
.270 (6.89)
.170 (4.32)
.220 (5.59)
.275 (6.98)
.300 (7.62)
.375 (9.52)
.400 (10.16)
.400 (10.16)
.475 (12.06)
.575 (14.60)
.675 (17.14)
.025 (.64)
.025 (.64)
.025 (.64)
.025 (.64)
.025 (.64)
.025 (.64)
.025 (.64)
.025 (.64)
.025 (.64)
.025 (.64)
C622/3
C627/8
C630/1
C637/8
C640/1
C642/3
C647/8
C657/8
C667/8
.300 (7.62)
.220 (5.59)
.400 (10.20)
.280 (7.11)
.560(14.22)
.500(12.70)
.600 (15.24)
.720 (18.29)
ORDERING INFORMATION
C 622 C 102 M
D
R
5
T
A
CERAMIC
CASE SIZE
FAILURE RATE
A – Not Applicable
See Table Above
TERMINATION MATERIAL
T – Standard
INTERNAL CONSTRUCTION
SPECIFICATION
C – Standard
5 – Standard
DIELECTRIC
EIA Designation
CAPACITANCE PICOFARAD CODE
Expressed in picofarads (pF). First two
digits represent significant figures. Third
digit specifies number of zeros. Use 9 for
1.0 thru 9.9 pF. Example 2.2pF = 229
G – C0G (NP0) - Ultra Stable
R – X7R - Stable
RATED VOLTAGE
CAPACITANCE TOLERANCE
C0G:J – 5ꢀ, K – 10ꢀ% M – 20ꢀ
X7R: K – 10ꢀ% M – 20ꢀ% P – 0, -100ꢀ%
Z – -20,+80ꢀ
C – 500
D – 1000
F – 1500
G – 2000
Z – 2500
H – 3000
MARKING INFORMATION
Series
Voltage
Series
Voltage
Front View
Back View
K6G
KEMET
Capacitance,
Tolerance
K6DR
103K
KEMET
102K
1000V
0514
Capacitance,
Tolerance
Dielectric
KEMET
K6D
102K
Date
Code
Rated
Voltage
Capacitance,
Tolerance
Series
Voltage
C617 & C62X
C63X
C64X, C65X, C66X
For packaging information, see pages 40, and 41.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
15
CERAMIC CONFORMALLY COATED/RADIAL
HIGH VOLTAGE “GOLDEN MAX”
RATINGS & PART NUMBER REFERENCE - COG/NPO
Goldmax HV C6XX Series Special Lead Spacing per M49467 - C0G
C617
C62X
(X=2, 3)
WVDC
C62X
(X=7, 8)
WVDC
C63X
(X=0,1)
WVDC
C63X
(X=7, 8)
WVDC
Style
WVDC
Cap
Cap
Tol
Cap
Code
500
1k 1.5k 2k
3k
500
1k 1.5k 2k
3k
500
1k 1.5k 2k
3k
500
1k 1.5k 2k
2.5k
3k
500
1k 1.5k 2k 2.5k 3k
1.0pF
1.5
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
109
159
229
279
339
399
479
569
689
829
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
.010uF
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.10
For packaging information, see pages 40 and 41.
16
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CONFORMALLY COATED/RADIAL
HIGH VOLTAGE “GOLDEN MAX”
RATINGS & PART NUMBER REFERENCE - COG/NPO
Goldmax HV C6XX Series Special Lead Spacing per M49467 - C0G cont.
C64X
(X=0,1)
WVDC
C64X
(X=2, 3)
WVDC
C64X
(X=7, 8)
WVDC
C65X
(X=7, 8)
WVDC
C66X
(X=7, 8)
WVDC
Style
Cap
Cap
Tol
Cap
Code
500
1k
2k
3k
500
1k
2k
3k
500
1k
2k
3k
500
1k
2k
3k
500
1k
2k
3k
1.0pF
1.5
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
109
159
229
279
339
399
479
569
689
829
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
.010uF
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.10
For packaging information, see pages 40 and 41.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
17
CERAMIC CONFORMALLY COATED/RADIAL
HIGH VOLTAGE “GOLDEN MAX”
RATINGS & PART NUMBER REFERENCE - X7R
Goldmax HV C6XX Series Special Lead Spacing per M49467 - X7R
C617
C62X
(X=2, 3)
WVDC
C62X
(X=7, 8)
WVDC
C63X
(X=0,1)
WVDC
C63X
(X=7, 8)
WVDC
Style
WVDC
Cap
Cap
Tol
Cap
Code
500
1k 1.5k
2k
500
1k
1.5k 2k
3k
500
1k 1.5k 2k
3k
500
1k
1.5k
2k
2.5k
3k
500
1k
1.5k
2k
2.5k
3k
10pF
12
15
18
22
27
33
39
47
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
.010uF
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.10
.12
.15
.18
.22
.27
.33
.39
.47
.56
.68
.82
1.0
1.2
1.5
1.8
2.2
2.7
For packaging information, see pages 40 and 41.
18
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CONFORMALLY COATED/RADIAL
HIGH VOLTAGE “GOLDEN MAX”
RATINGS & PART NUMBER REFERENCE - X7R
Goldmax HV C6XX Series Special Lead Spacing per M49467 - X7R cont.
C64X
(X=0,1)
WVDC
C64X
(X=2, 3)
WVDC
C64X
(X=7, 8)
WVDC
C65X
(X=7, 8)
WVDC
C66X
(X=7, 8)
WVDC
Style
Cap
Cap
Tol
Cap
Code
500
1k
2k
3k
500
1k
2k
3k
500
1k
2k
3k
500
1k
2k
3k
500
1k
2k
3k
10pF
12
15
18
22
17
33
39
47
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
K,M,P,Z
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
.010uF
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.10
.12
.15
.18
.22
.27
.33
.39
.47
.56
.68
.82
1.0
1.2
1.5
1.8
2.2
2.7
For packaging information, see pages 40 and 41.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
19
CERAMIC LEADED
PACKAGING INFORMATION
Ceramic Radial
Lead Tape and Reel Packaging
KEMET offers standard reeling of Molded and Conformally
Coated Radial Leaded Ceramic Capacitors for automatic
insertion per EIA specification RS-468. Parts are taped to a
tagboard carrier strip, and wound on a reel as shown in
Figure 1. Kraft paper interleaving is inserted between the
layers of capacitors on the reel. Ammopack is also available,
with the same lead tape configuration and package quantities.
Figure 1
®
KEMET
KEMET
Carrier Strip
12"
(30.48 cm)
.059" to .315"
Greater Than
Over All
*
Height
®
of Taped
Components
Adhesive Tape
Hub
1
Kraft Paper
Interleaving
Carrier Tape
3 / "
4
(82.6)
.655" ±0.010"
(16.6 ±0.25)
1
/ "
8
(3.18)
(Note: Non-standard lead lengths
available in bulk only.)
Figure 3: Standard Reel
C330**
C340**
C6xx#
CK06**
CK05**
C317**
C322**
C323**
C315*
C320*
C056**
C066**
CKR06** CKR05**
C6xx#
C333**
C062**
C052**
∆H
P
2
P
1MM Max.
(.039")
H1
D0
P1
W
2
H
F
H0
W
W
0
Tape
Carrier
W
2
L
1
T
* Lead spacings are 2.54mm
(.10") center-to-center.
P
0
** Lead spacings are 5.08mm
(.20") center-to-center.
Figure 2: Lead Tape Configuration (See Table Below)
# See page 15 for exact lead
configuration for Series.
Ceramic Radial Tape and Reel Dimensions in Millimeters & (Inches)
Nominal
mm (inch)
Tolerance
mm (inch)
Nominal
mm (inch)
Tolerance
mm (inch)
Dimension
Symbol
Dimension
Symbol
Sprocket Hole Diameter
Do
4.0 (.157)
12.7 (.500)
12.7 (.500)
± 0.2 (.008)
± 0.3 (.012)
± 0.3 (.012)
Height to Seating
Plane (formed leads) (2)
Component Alignment
H0
7301
7303
7301
7303
16.0 (.630) 18.0 (.709) ±0.5 (.020) Minimum
Sprocket Hole Pitch
Component Pitch
Lead Spacing (1)
P0
P
∆h
L1
t
4.0 (.157)
1.0 (.039)
0.7 (.051)
1.5 (.059)
18.0 (.709)
5.0 (.197)
3.0 (.118)
±0.2 (.008)
Maximum
±0.2 (.008)
Maximum
Lead Protrusion
Composite Tape
Thickness
Overall Tape and
Lead Thickness
Carrier Tape Width
F
5.08
(.20)
3.81
2.54
(.10)
5.08
+0.6 -0.2
(+.024 -.008)
± 0.7 (.028)
Sprocket Hole Center
to Lead Center (1)
Sprocket Hole Center
to Component Center
Height to Seating Plane
(straight leads) (2)
P1
P2
H
T
(.150)
(.200)
6.35 (.250)
± 1.3 (.051)
W
W0
W2
+1.0 - 0.5
(+.039 -.020)
Minimum
Hold-Down Tape
Width
Hold-Down Tape
Location
7301
7303
7301
7303
16.0 (.630) 18.0 (.709) ±0.5 (.020) Minimum
32.2 (1.27) Maximum
Component Height
Above Tape Center
H1
Maximum
(1) Measured at the egress from the carrier tape, on the component side.
(2) Determined by a 4 digit suffix placed at the end of the part number, as follows:
7301 =
7303 =
Recommended for parts with formed leads.
Recommended for parts with straight leads.
Example: C322C104K5R5CA7301
Example: C320C104K5R5CA7303
40
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC LEADED
PACKAGING INFORMATION
CERAMIC PACKAGING
Standard (1) Ammo Pack Maximum
KEMET
Series
Military
Style
Military
Specification
Reel
Size
Bulk
Quantity
Reel
Quantity
Maximum
Quantity
C114C-K-G
C124C-K-G
C192C-K-G
C202C-K
C222C-K
C052C-K-G
C062C-K-G
C114G
C124G
C192G
C202G
C222G
C052/56G
C062/66G
C512G
C522G
C114T
C124T
C192T
C202T
C222T
C052/56T
C062/66T
C31X
C32X
C33X
C340
C350
C410
C412
C420
C430
C440
C512
C522
C617
CK12, CC75
CK13, CC76
CK14, CC77
CK15
MIL-C-11015/
MIL-PRF-20
200/Box
200/Box
100/Box
25/Box
5000
5000
3000
500
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
N/A
N/A
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
12"
N/A
12"
12"
12"
12"
12"
N/A
N/A
CK16
10/Tray
300
CK05, CC05
CK06, CC06
CCR75
CCR76
CCR77
CC78-CCR78
CC79-CCR79
CCR05
100/Bag
100/Bag
200/Box
200/Box
100/Box
25/Box
2000
1500
2000
1500
5000
5000
3000
500
MIL-PRF-20
10/Tray
300
100/Bag
100/Bag
Footnote (2)
Footnote (2)
200/Box
200/Box
100/Box
25/Box
1700
1500
N/A
CCR06
CC07-CCR07
CC08-CCR08
CKR11
CKR12
CKR14
CKR15
CKR16
CKR05
CKR06
N/A
MIL-PRF-39014
5000
5000
3000
500
10/Tray
300
100/Bag
100/Bag
500/Bag
500/Bag
250/Bag
100/Bag
50/Bag
300/Box
200/Box
300/Box
200/Box
200/Box
Footnote (2)
Footnote (2)
500/Bag
500/Bag
500/Bag
250/Bag
250/Bag
100/Bag
100/Bag
100/Bag
50/Bag
1700
1500
2500
2500
1500
1000
N/A
5000
5000
5000
2500
2500
N/A
2500
2500
1500
1000
N/A
4000
4000
4000
2000
2000
N/A
N/A
N/A
N/A
N/A
C622/C623
C627/C628
C630/C631
C637/C638
C640/C641
C642/C643
C647/C648
C657/C658
C667/C668
50/Bag
NOTE: (1) Standard packaging refers to number of pieces per bag, tray or vial.
(2) Quantity varies. For further details, please consult the factory.
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
41
C640C109ZFR5TA 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
C640C122JHG5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 3000V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.0012uF, Through Hole Mount, 5525, RADIAL LEADED, ROHS COMPLIANT | 获取价格 | |
C640C122MDG5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 20% +Tol, 20% -Tol, C0G, 30ppm/Cel TC, 0.0012uF, Through Hole Mount, 5525, RADIAL LEADED, ROHS COMPLIANT | 获取价格 | |
C640C122PDR5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 100% +Tol, 0% -Tol, X7R, 15% TC, 0.0012uF, Through Hole Mount, 5525, RADIAL LEADED, ROHS COMPLIANT | 获取价格 | |
C640C122PGR5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 2000V, 100% +Tol, 0% -Tol, X7R, 15% TC, 0.0012uF, Through Hole Mount, 5525, RADIAL LEADED, ROHS COMPLIANT | 获取价格 | |
C640C122ZCR5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 500V, 80% +Tol, 20% -Tol, X7R, 15% TC, 0.0012uF, Through Hole Mount, 5525, RADIAL LEADED | 获取价格 | |
C640C123JCG5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 500V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.012uF, Through Hole Mount, 5525, RADIAL LEADED, ROHS COMPLIANT | 获取价格 | |
C640C123JDG5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.012uF, Through Hole Mount, 5525, RADIAL LEADED, ROHS COMPLIANT | 获取价格 | |
C640C123KCR5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 500V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.012uF, Through Hole Mount, 5525, RADIAL LEADED | 获取价格 | |
C640C123KDG5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, C0G, 30ppm/Cel TC, 0.012uF, Through Hole Mount, 5525, RADIAL LEADED, ROHS COMPLIANT | 获取价格 | |
C640C123KDR5TA | KEMET | Ceramic Capacitor, Multilayer, Ceramic, 1000V, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.012uF, Through Hole Mount, 5525, RADIAL LEADED | 获取价格 |
C640C109ZFR5TA 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6