C878AF35120AA1J_技术文档

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure

Protection, 420 VAC/470 VAC

Applications

Overview

Typical applications include motor run P2 safety class: single-

phase motors, low power electric motors and compressors.

Polypropylene metallized ﬁlm with cylindrical aluminium can

type ﬁlled with resin; faston, plastic deck or cable terminals and

overpressure safety device.

Beneﬁts

• Self-healing

• VDE, CQC and UL810 approved

• Rated frequency of 50 Hz and 60 Hz

• High capacitance density

• Safety device protection

Part Number System

C87

8

B

F

3

4300

Capacitance Code

(pF)

AA

4

J

Case & Fixing

Bolt Code

Internal

Use

Series

Marking

Terminal Style

Packaging

Tolerance

C87 =

0 = 10,000

C870:

C = Standard

Capacitors (Class B) or 3,000 D = UL

F = Cylindrical

aluminum can with 2.8 x 0.8 (hole)

M8 bolt

G = Cylindrical

1 = Single faston

Digits 2-4 indicate AA =

0, 1, 2,

J = 5%

K = 10%

Motor Run hours/420 VAC

the ﬁrst three

digits of the

Standard 4, 5 =

2 = Single faston

6.3 x 0.8

Standard R = 0 to +10%

X = Special

hours/470 VAC

(Class C)

Z = Special

C878:

capacitance value.

aluminum can with 3 = Double faston First digit indicates

tolerance

8 = 30,000

hours/420 VAC

(Class A) or 10,000 Z = Special

hours/470 VAC

(Class B)

A = Standard

B = UL

M12 bolt

E= Without ﬁxing

bolt/ﬂat bottom

6.3 x 0.8

the number of

zeros to be added.

4 = Single faston

2.8 x 0.8 (slot)

5 = Single faston

2.8 x 0.5 (hole)

One world. One KEMET

F3063_C87 • 11/20/2015

1

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC

Dimensions – Millimeters

D

H

Mounting Stud

(M)

+1/-0

±2

25

30

35

40

45

50

55

60

48

60

78

M8 x 10

M12 x 12.5

48

60

78

48

60

78

98

78

98

78

98

133

98

133

F3063_C87 • 11/20/2015

2

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC

Performance Characteristics

Type of Service

Continuous

Operating Class

C87/8

C87/0

Class B 10,000 hours at 470 VAC, Class A 30,000 hours at 420 VAC

Class B 10,000 hours at 420 VAC, Class C 3,000 hours at 470 VAC

C87/1

None

C87/5

None

Temperature Range

Rated Voltage

Rated Frequency

-25 to +85°C

470 VAC

50 – 60 Hz

Voltage Rise/Fall Time

(Maximum)

0 = 15 V/μs

8 = 20 V/μs

Maximum Permissible Voltage

Maximum Permissible Current

Dissipation Factor (DF)

Safety Class

1.10 x rated voltage

1.30 x rated current

20 x 10 ^-4at +20°C, 50Hz

P2

Maximum Altitude

Capacitance Tolerance

Mounting

2,000 m

±5%

Any position

Aluminium

Case

Thermoplastic Polymer V0 (UL 94)

Plastic deck with:

Disk

- self-extinguishing features V0 (UL94)

- GWT–GWFI–GWIT value in conformity with the Standard IEC60335-1

ed.4 par.30/EN60335-1 ed.3 par.30

Filling Resin

Dielectric

Polyurethane

Polypropylene

Plates

Self-healing metal layer

2 V_nfor 2 seconds

Test Voltage Terminal to

Terminal (V_TT)

Test Voltage Terminal to Can

(V_TC)

2,000 V for 2 seconds

Total Harmonic Distortion

Fire Load

Up to 10%

40 MJ/kg

Air Distance Between Live

Parts

≥ 5 mm

≥ 6 mm

Air Distance Between Live

Parts and Case

Vibration Test

IEC 68-2-6

Maximum Tightening Torque

5 Nm (M8), 10 Nm (M12)

F3063_C87 • 11/20/2015

3

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC

Table 1 – Ratings & Part Number Reference

Maximum Dimensions in mm

Capacitance

Value (µF)

dV/dt

(V/µs)

VAC

Termination

Part Number

D

H

78

16

18

20

22

25

30

35

40

45

50

60

70

75

80

100

110

1

470

450

470

40

35

40

45

40

45

50

60

55

60

50

55

60

30

35

30

35

40

45

50

30

35

40

45

30

15

20

Double Fast-On

Single Fast-On

Double Fast-On

C870CF35160AA1J

C870CF35180AA0J

C870CF35200AA0J

C870CF35200AA1J

C870CF35220AA0J

C870CF35250AA0J

C870CF35250AA1J

C870CF35300AA1J

C870CF35350AA0J

C870CF35400AA0J

C870CF35450AA0J

C870CG35500AA1J

C870CG35600AA5J

C870CG35700AA1J

C870CG35750AA0J

C870CG35750AA2J

C870CG35800AA2J

C870CG36100AA0J

C870CG36100AA0K

C870CG36100AA1J

C870CG36110AA0J

C878BF34100SA4J

C878BF34150SA4J

C878ZF34180SA0J

C878BF34200SA0J

C878BF34250SA4J

C878BF34300SA4J

C878BF34350SA4J

C878BF34400SA0J

C878BF34500SA0J

C878BF34600SA0J

C878BF34750SA0J

C878BF34800SA0J

C878BF35100SA0J

C878BF35110SA0J

C878BF35120SA0J

C878BF35150SA0J

C878BF35160SA0J

C878BF35200SA0J

C878BF35230SA0J

C878BF35250SA0J

C878BF35290SA0J

C878BF35300SA0J

C878BF35460SA0J

C878BF35500SA0J

C878BF35550SA0J

C878BF35600SA0J

C878AF24800AA0J

C878AF24800AA1J

C878AF25100AA0J

C878AF25120AA0J

C878AF25120AA1J

C878AF25160AA0J

C878AF25160AA1J

C878AF25200AA0J

C878AF25250AA0J

C878AF25300AA0J

C878AF25400AA0J

C878AF34100AA4J

C878AF34200AA4J

C878AF34250AA4J

98

78

98

133

98

133

48

60

78

1.5

1.8

2

2.5

3

3.5

4

5

6

7.5

8

10

11

12

15

16

20

23

25

29

30

46

50

55

60

8

78

98

133

78

98

78

98

133

48

8

10

12

16

20

25

30

40

1

2

2.5

Capacitance

Value (µF)

dV/dt

(V/µs)

VAC

B (mm)

H (mm)

Termination

Part Number

F3063_C87 • 11/20/2015

4

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC

Table 1 – Ratings & Part Number Reference cont'd

Maximum Dimensions in mm

Capacitance

Value (µF)

dV/dt

(V/µs)

VAC

Termination

Part Number

D

H

48

3

3.5

4

5

6

470

30

35

30

35

30

35

30

35

40

35

40

35

45

50

55

50

60

20

Double Fast-On

C878AF34300AA4J

C878AF34350AA4J

C878AF34400AA4J

C878AF34500AA4J

C878AF34600AA0J

C878AF34600AA1J

C878AF34750AA0J

C878AF34750AA2J

C878AF34800AA0J

C878AF34900AA0J

C878AF35100AA0J

C878AF35110AA0J

C878AF35120AA0J

C878AF35120AA1J

C878AF35125AA0J

C878AF35140AA0J

C878AF35150AA0J

C878AF35160AA0J

C878AF35160AA1J

C878AF35160AA2J

C878AF35180AA0J

C878AF35200AA0J

C878AF35225AA0J

C878AF35250AA0J

C878AF35300AA0J

C878AF35300AA1J

C878AF35315AA0J

C878AF35350AA0J

C878AF35400AA0J

C878AG35400AA2J

C878AG35450AA0J

C878AG35500AA0J

C878AG35500AA1J

C878AG35550AA0J

C878AG35600AA0J

C878AG35600AA1J

C878AG35800AA0J

48

78

60

78

98

78

98

6

7.5

8

9

10

11

12

12.5

14

15

16

18

20

22.5

25

30

31.5

35

40

45

50

55

60

80

133

98

133

Capacitance

Value (µF)

dV/dt

(V/µs)

VAC

B (mm)

H (mm)

Termination

Part Number

F3063_C87 • 11/20/2015

5

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC

Expected Life Hours

C878

C870

Marking

MKP C87

Capacitance Tolerance/Safety Class

Capacitor Class

Climate Class

Rated Voltage based on UL Standards

UL Approvals

Self-Healing dielectric

Data Code

F3063_C87 • 11/20/2015

6

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC

Dissipation Factor

Dissipation factor is a complex function involved with the inefﬁciency of the capacitor. The tgδ may change up and down with increased

temperature. For more information, please refer to Performance Characteristics.

Sealing

Hermetically Sealed Capacitors

When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a

breach in the capacitor which can result in leakage, impregnation, ﬁlling ﬂuid or moisture susceptibility.

Resin Encased/Wrap & Fill Capacitors

The resin seals on resin encased and wrap and ﬁll capacitors will withstand short-term exposure to high humidity environments without

degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and chemicals. These case materials are

somewhat porous and through osmosis can cause contaminants to enter the capacitor. The second area of contaminated absorption

is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires, there can be a path formed up to the lead wire into the

capacitor section. Aqueous cleaning of circuit boards can aggravate this condition.

Barometric Pressure

The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the barometric

pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due

to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well as low insulation resistance. Heat

transfer can also be affected by altitude operation. Heat generated in operation cannot be dissipated properly and can result in high RI2

losses and eventual failure.

Radiation

Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric embitterment can

take place causing shorts or opens.

F3063_C87 • 11/20/2015

7

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC

Environmental Compliance

As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of

both our capacitors and the production of them.

In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of

some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers'

obligations to guarantee their products to fulﬁll these legislative requirements. The only material of concern in our products has

been Lead (Pb), which has been removed from all designs to fulﬁll the requirement of containing less than 0.1% of Lead in any

homogeneous material.

KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed.

Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode coatings. To

clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible

capacitors.

Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on the label.

Materials & Environment

The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and constant attention

to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out statistical analysis on the

materials purchased before acceptance. All materials are, to the company's present knowledge, non-toxic and free from Cadmium,

Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine Dioxins Bromurate Clorurate, CFC and HCFC

and Asbestos.

Green Products

All KEMET power ﬁlm products are ROHS Compliant.

Insulation Resistance

When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity. Low

insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to excessive

humidity.

F3063_C87 • 11/20/2015

8

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC

KEMET Corporation

World Headquarters

Europe

Asia

Southern Europe

Sasso Marconi, Italy

Tel: 39-051-939111

Northeast Asia

Hong Kong

Tel: 852-2305-1168

2835 KEMET Way

Simpsonville, SC 29681

Skopje, Macedonia

Tel: 389-2-55-14-623

Shenzhen, China

Tel: 86-755-2518-1306

Mailing Address:

P.O. Box 5928

Greenville, SC 29606

Beijing, China

Central Europe

Landsberg, Germany

Tel: 49-8191-3350800

Tel: 86-10-5877-1075

www.kemet.com

Tel: 864-963-6300

Fax: 864-963-6521

Shanghai, China

Tel: 86-21-6447-0707

Kamen, Germany

Tel: 49-2307-438110

Corporate Ofﬁces

Fort Lauderdale, FL

Tel: 954-766-2800

Seoul, South Korea

Tel: 82-2-6294-0550

Northern Europe

Wyboston, United Kingdom

Tel: 44-1480-273082

Taipei, Taiwan

Tel: 886-2-27528585

North America

Northeast

Wilmington, MA

Tel: 978-658-1663

Espoo, Finland

Tel: 358-9-5406-5000

Southeast Asia

Singapore

Tel: 65-6701-8033

Southeast

Lake Mary, FL

Tel: 407-855-8886

Penang, Malaysia

Tel: 60-4-6430200

Central

Novi, MI

Tel: 248-994-1030

Bangalore, India

Tel: 91-806-53-76817

Irving, TX

Tel: 972-915-6041

West

Milpitas, CA

Tel: 408-433-9950

Mexico

Guadalajara, Jalisco

Tel: 52-33-3123-2141

Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of

KEMET Electronics Corporation.

F3063_C87 • 11/20/2015

9

Motor Run Capacitors

C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC

Prototype Sample Disclaimer

The Customer acknowledges the following limitations of the prototype samples:

(1) Prototype samples are manufactured from preliminary designs and manufacturing processes; may not represent ﬁnal designs; have not been released for

commercial use and are not subject to the same quality control procedures applicable to released products.

(2) Prototype samples are not qualiﬁed parts and are provided “as-is” by KEMET Electronics Corporation, which speciﬁcally disclaims any and all warranties and

guarantees, explicit or implied, including, without limitation, the warranties of merchantability and ﬁtness for a particular purpose or use.

(3) Prototype samples are not intended for commercial use; are provided for engineering evaluation only and are not recommended for use in the Customer’s

production line.

(4) The Customer assumes the risk ofany and alluses that the Customer makes of the prototype samples.

General Disclaimer

“All product speciﬁcations, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty,

or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for

such applications, but are not intended to constitute – and we speciﬁcally disclaim – any warranty concerning suitability for a speciﬁc customer application or use.

This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application.

KEMET’s product warranty is set forth at www.kemet.com under Terms and Conditions of Sale.”

F3063_C87 • 11/20/2015 10


型号：	C878AF35120AA1J
厂家：	KEMET CORPORATION
描述：	Motor Run Capacitors
文件：	总10页 (文件大小：400K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

C878AF35120AA1J [KEMET]

相关型号：

C878AF35125AA0J

C878AF35140AA0J

C878AF35150AA0J

C878AF35160AA0J

C878AF35160AA1J

C878AF35160AA2J

C878AF35180AA0J

C878AF35200AA0J

C878AF35225AA0J

C878AF35250AA0J

C878AF35300AA0J

C878AF35300AA1J