P295BE681M500A [KEMET]
Paper Capacitor, Paper, 1500V, 20% +Tol, 20% -Tol, 0.00068uF, Through Hole Mount, RADIAL LEADED;
| 型号： | P295BE681M500A |
| 厂家： | 
KEMET CORPORATION |
| 描述： | Paper Capacitor, Paper, 1500V, 20% +Tol, 20% -Tol, 0.00068uF, Through Hole Mount, RADIAL LEADED 电容器 |
| 文件： | 总12页 (文件大小：1415K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper,
Class Y1, 500 VAC
Overview
Applications
The P295 Series is constructed of multilayer metallized
paper encapsulated and impregnated in self-extinguishing
material meeting the requirements of UL 94 V–0.
Typical applications include safety capacitors for bridging
of double or reinforced insulation applications requiring
voltage test up to 4,000 VAC at 60 seconds. P295 Series
capacitors can be left in place during this test.
Benefits
• Approvals: ENEC, UL, cUL, CQC
• Rated voltage: 500 VAC 50/60 Hz
• Capacitance range: 470 – 4,700 pF
• Lead spacing: 15.0 mm
• Capacitance tolerance: ±20%
• Climatic category: 40/115/56/B, IEC 60068–1
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ−40˚Cꢀtoꢀ+115˚C
• 100% screening factory test at 4,000 VAC, 50 Hz, 2
seconds
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
• Highest possible safety regarding active and passive
flammability
• Excellent self-healing properties ensure long life even when
subjected to frequent over voltages
• Good resistance to ionization due to impregnated dielectric
• High dV/dt capability
• Impregnated paper provides excellent stability and
reliability properties, particularly in applications with
continuous operation
Part Number System
P
295
B
E
471
M
500
A
Capacitor
Class
Lead Spacing
(mm)
Capacitance
Code (pF)
Capacitance
Tolerance
Rated Voltage
(VAC)
Series
Size Code
Packaging
P = Paper
Y1, Metallized
Paper
B = 15.0
See Dimension First two digits
M = ±20%
500 = 500
See Ordering
Options Table
Table
represent
significantꢀ
figures.ꢀThirdꢀ
digitꢀspecifiesꢀ
number of
zeros.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016
1
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Ordering Options Table
KEMET
Lead and
Packaging
Code
Lead Spacing
Lead Length
(mm)
Nominal
(mm)
Type of Leads and Packaging
Standard Lead and Packaging Options
Bulk – Short Leads
6ꢀ+0/−1
C
A
Bulk – Maximum Length Leads
30ꢀ+5/−0
15
Tape and Reel (Standard Reel)
Other Lead and Packaging Options
Tape and Reel (Large Reel)
H0=ꢀ18.5ꢀ+/−0.5
L
H0=ꢀ18.5ꢀ+/−0.5
P
Dimensions – Millimeters
ꢀꢁOꢂꢃ ꢄꢅEW
ꢆꢅDE ꢄꢅEW
L
ꢀ
ꢁ
d
0ꢂ5
LL
p
Size
Code
p
B
H
L
d
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
BE
BJ
BL
BQ
15.0
15.0
15.0
15.0
+/−0.4
+/−0.4
+/−0.4
+/−0.4
5.5
6.5
7.5
8.5
Maximum
Maximum
Maximum
Maximum
12.5
12.5
14.5
16.0
Maximum
Maximum
Maximum
Maximum
18.0
18.0
18.0
18.0
Maximum
Maximum
Maximum
Maximum
0.8
0.8
0.8
0.8
+/−0.05
+/−0.05
+/−0.05
+/−0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016
2
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Performance Characteristics
Rated Voltage
Capacitance Range
Capacitance Tolerance
Temperature Range
Climatic Category
Approvals
500 VAC 50/60 Hz
0.00047 – 0.0047 µF
±20%
−40°Cꢀtoꢀ+115°C
40/115/56/B
ENEC, UL, cUL, CQC
MaximumꢀValuesꢀatꢀ+23°C
Dissipation Factor
1 kHz
1.3%
The 100% screening factory test is carried out at 4,000 VAC,
50 Hz, 2 seconds. The voltage level is selected to meet the
requirements in applicable equipment standards. All electrical
characteristics are checked after the test.
Test Voltage Between Terminals
Measuredꢀatꢀ500ꢀVDCꢀafterꢀ60ꢀseconds,ꢀ+23°C
Minimum Value Between Terminals
≥ꢀ12,000ꢀMΩ
Insulation Resistance
In DC Applications
Recommendedꢀvoltageꢀ≤ꢀ1,500ꢀVDC
Tabulated self-resonance frequencies f0 refer to 5 mm lead
length
Resonance Frequency
Suppression vs. Frequency, Typical Values
dꢄ
Attenuation
ꢃ0
ꢂ0
50
ꢁ,ꢃ00 pF
ꢁ0
ꢀ0
20
10
0
1,500 pF
ꢁꢃ0 pF
ꢆ
1
ꢀ
5
10
ꢀ0
100 200 Mꢅz
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016
3
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Environmental Test Data
Test
IEC Publication
Procedure
1.7 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
3 directions at 2 hours each
Endurance
IEC 60384–14
Vibration
IEC 60068–2–6 Test Fc
10–500 Hz at 0.75 mm or 98m/s2
Bump
IEC 60068–2–29 Test Eb
IEC 60068–2–14 Test Na
IEC 60384–14
4,000 bumps at 390 m/s2
Change of Temperature
Passive Flammability
Damp Heat Steady State
Upper and lower rated temperature 5 cycles
IECꢀ60384–1,ꢀIECꢀ60695–11–5ꢀNeedleꢀflameꢀtest
+40°Cꢀandꢀ93%ꢀRH,ꢀ56ꢀdays
IEC 60068–2–78 Test Cab
Approvals
Certification Body
Mark
Specification
File Number
Intertek Semko AB
EN/IEC 60384-14
SE/0140–34A
UL 60384-14
UL
E73869
CAN/CSA-E60384-14-09
IEC 60384–14
CQC
CQC16001145222
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016
4
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Table 1 – Ratings & Part Number Reference
Maximum Dimensions in mm
Capacitance
Value (µF)
Lead Spacing
(p)
fo
(MHz)
dV/dt
(V/µs)
KEMET Part Number
B
H
L
0.00047
0.00056
0.00068
0.00082
0.001
0.0012
0.0015
0.0018
0.0022
0.0025
0.0027
0.0033
0.0039
0.0047
5.5
5.5
5.5
5.5
5.5
6.5
6.5
6.5
6.5
7.5
7.5
7.5
8.5
8.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
14.5
14.5
14.5
16.0
16.0
18
18
18
18
18
18
18
18
18
18
18
18
18
18
15
15
15
15
15
15
15
15
15
15
15
15
15
15
64
59
54
49
46
43
40
37
33
31
30
27
24
22
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
P295BE471M500(1)
P295BE561M500(1)
P295BE681M500(1)
P295BE821M500(1)
P295BE102M500(1)
P295BJ122M500(1)
P295BJ152M500(1)
P295BJ182M500(1)
P295BJ222M500(1)
P295BL252M500(1)
P295BL272M500(1)
P295BL332M500(1)
P295BQ392M500(1)
P295BQ472M500(1)
Capacitance Value
(µF)
dV/dt
(V/µs)
KEMET
Part Number
B (mm)
H (mm)
L (mm)
Lead Spacing (p)
fo (MHz)
(1) Insert lead and packaging code. See Ordering Options Table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016
5
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder.
This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave
soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm),
andꢀgreatꢀcareꢀhasꢀtoꢀbeꢀtakenꢀduringꢀsoldering.ꢀTheꢀrecommendedꢀsolderꢀprofilesꢀfromꢀKEMETꢀshouldꢀbeꢀused.ꢀPleaseꢀconsultꢀ
KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline
for successful soldering. Please see Figure 1.
Reflowꢀsolderingꢀisꢀnotꢀrecommendedꢀforꢀthrough-holeꢀfilmꢀcapacitors.ꢀExposingꢀcapacitorsꢀtoꢀaꢀsolderingꢀprofileꢀinꢀexcessꢀofꢀtheꢀ
above the recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-holeꢀpartsꢀafterꢀtheꢀcuringꢀofꢀsurfaceꢀmountꢀparts.ꢀConsultꢀKEMETꢀtoꢀdiscussꢀtheꢀactualꢀtemperatureꢀprofileꢀinꢀtheꢀoven,ꢀ
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
ꢀ00
Following is the recommendation for manual
soldering with a soldering iron.
2ꢈꢀs maꢉ
2ꢃ0 ꢄC
250
200
150
100
50
Firstwaꢍe
Second waꢍe
ꢀeꢁꢂꢃꢃeꢄꢅeꢅ ꢆꢂꢇꢅeriꢄꢈ ꢉeꢃperꢊꢋꢌre
ꢁ00
∆ꢊ ꢌ150 ꢄC
Cooling
Preꢋeating
ca 2 ꢄCꢅs
ꢀ50
ꢀ00
250
200
150
100
50
ca ꢀꢆ5 ꢄCꢅs tꢇpical
ca 5 ꢄCꢅs
115 ꢄC maꢉ
ꢊpreꢋeat
100 ꢄC
ꢀꢊpiꢋꢂꢌ
0
0
ꢁ0
ꢂ0
120
1ꢃ0
200
2ꢁ0
ꢀiꢁe ꢅꢉꢈ
0
0
1
2
ꢀ
ꢁ
5
ꢂ
ꢃ
ꢆꢂꢇꢅeriꢄꢈ ꢋiꢃe ꢍꢎeꢁꢂꢄꢅꢎ
The soldering iron tip temperature should
beꢀsetꢀatꢀ350°Cꢀ(+10°Cꢀmaximum)ꢀwithꢀtheꢀ
soldering duration not to exceed more than 3
seconds.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016
6
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Maximum
Maximum Preheat
Peak Soldering
Temperature
Temperature
Dielectric
Film Material
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
Pitch
≤ꢀ10ꢀmm = 15 mm > 15 mm ≤ꢀ15ꢀmm > 15 mm
Polyester
Polypropylene
Paper
130°C
100°C
130°C
130°C
110°C
130°C
130°C
130°C
140°C
270°C
260°C
270°C
270°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Maximum temperature
Dielectric Film Material
measured inside the element
Polyester
Polypropylene
Paper
160°C
110°C
160°C
160°C
Polyphenylene Sulphide
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectiveꢀdipꢀsolderingꢀisꢀaꢀvariationꢀofꢀreflowꢀsoldering.ꢀInꢀthisꢀmethod,ꢀtheꢀprintedꢀcircuitꢀboardꢀwithꢀthrough-holeꢀ
componentsꢀtoꢀbeꢀsolderedꢀisꢀpreheatedꢀandꢀtransportedꢀoverꢀtheꢀsolderꢀbathꢀasꢀinꢀnormalꢀflowꢀsolderingꢀwithoutꢀtouchingꢀ
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
Theꢀtemperatureꢀprofileꢀforꢀselectiveꢀsolderingꢀisꢀsimilarꢀtoꢀtheꢀdoubleꢀwaveꢀflowꢀsolderingꢀoutlinedꢀinꢀthisꢀdocument,ꢀ
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheatingꢀisꢀgreaterꢀthanꢀinꢀdoubleꢀwaveꢀflowꢀsoldering,ꢀandꢀgreatꢀcareꢀmustꢀbeꢀtakenꢀsoꢀthatꢀtheꢀpartsꢀareꢀnotꢀoverheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016
7
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Construction
Deꢀꢁiꢂeꢃ ꢄrꢅꢆꢆ ꢇeꢈꢀiꢅꢉ
Molded Plastic
Case
Metallized
Impregnated Paper
ꢅFirst Laꢄerꢆ
Molded Plastic
Case
SelꢀꢁEꢂtinguisꢃing
Resin
Metallized
Impregnated Paper
ꢅSecond Laꢄerꢆ
Margin
Margin
Metal
Contact
Laꢄer
Metal Contact
Laꢄer
Margin
Leads
Winding Scheme
Impregnated
Paper
Metal
Spraꢀing
Material
Metallization
ꢀerieꢁ Deꢁiꢂꢃ ꢄ ꢅꢆꢇꢈiꢇꢉꢊer ꢋꢌpreꢂꢃꢉꢈeꢍ Pꢉper Dieꢇeꢎꢈriꢎ
2 ꢀeꢎꢈiꢏꢃ
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016
8
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Marking
ꢁꢂOꢃꢀ
ꢀOP
ꢀEMEꢁ
Logo
Approꢃal
Marks
Series
Rated Voltage,
Saꢄetꢂ Class
Capacitance
ꢁolerance
Manuꢄacturing
ꢅate Code
Capacitance
IEC Climatic
Categorꢂ
Packaging Quantities
Lead
Spacing
(mm)
Bulk
Long
Leads
800
Standard
Large
Reel
ø 500 mm Formed
Standard
Reel
Thickness Height Length
Bulk
Ammo
Formed
Reel
ø 360 mm
600
(mm)
(mm)
(mm) Short Leads
5.5
5.5
7.5
6.5
8.5
8
10.5
12.5
14.5
12.5
16
18
18
18
18
18
18
18
18
18
18
1000
1000
800
1200
1200
800
550
550
350
450
350
350
250
450
250
200
570
570
378
480
324
351
297
520
252
216
800
600
400
400
1000
600
600
500
1000
800
400
400
15
15
600
400
400
800
9.5
6
17.5
12
500
300
350
700
1000
450
800
500
1000
600
11
13
19
250
300
12.5
400
300
250
500
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016
9
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Lead Taping & Packaging (IEC 60286–2)
Leꢀꢁ ꢂpꢀꢃiꢄꢅ 2ꢆꢇꢈ ꢉ 22ꢇ5 ꢊꢊ
Leꢀꢁ ꢂpꢀꢃiꢄꢅ ꢆꢇꢈ2 ꢉ ꢆ5ꢈ2 ꢊꢊ
0
0
ꢀꢁrꢂeꢃ Leꢄꢃꢅ ꢆrꢁꢂ ꢇꢈꢉ2 ꢊꢁ ꢋꢉ5 ꢂꢂ
0
Taping Specification
Dimensions in mm
Standard IEC 60286–2
Formed
7.5
Lead spacing
+6/−0.1
F
10.2
15.2
20.3
22.5
F
Carrier tape width
Hold-down tape width
Position of sprocket hole
+/−0.5
+/−0.3
+/−0.5
W
W0
W1
W2
D0
18
18
12
18
12
18
12
18
12
18+1/−0.5
9
9
9
9
9
9
9+0.75/−0.5
3
Distance between tapes Maximum
3
3
3
3
3
Sprocket hole diameter
Feed hole lead spacing
Distance lead – feed hole
+/−0.2
+/−0.3
+/−0.7
4
4
4
4
4
4
(1)
P0
12.7(4)
3.75
1.3
2
12.7
7.6
1.3
2
12.7
5.1
1.3
2
12.7
8.9
1.3
2
12.7
5.3
1.3
2
0.9MAX
18.5+/−0.5
58
12.7
P1
P1
∆p
∆h
t
Deviation tape – plane Maximum
Lateral deviation Maximum
1.3
2
Total thickness
+/−0.2
0.7
18+2/−0
35
0.7
18+2/−0
35
0.7
18+2/−0
35
0.7
18+2/−0
35
0.9MAX
18+2/−0
58MAX
(2)
Sprocket hole/cap body
Nominal
H0
H1
(3)
Sprocket hole/top of cap body Maximum
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) Depending on case size.
(4) 15 mm available on request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016 10
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Specifications
Dimensions (mm)
Series
H
W
T
P295
330
330
50
H
W
Reel Specifications
ꢀ
Dimensions (mm)
Series
D
H
W
360
500
P295
30
46 (Max)
H
D
Manufacturing Date Code (IEC–60062)
W
Y = Year, Z = Month
Year
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
Code
M
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
H
J
K
Month
January
February
March
April
May
Code
1
2
3
4
5
6
7
8
9
O
N
D
June
July
August
September
October
November
December
L
M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016 11
Film Capacitors – AC Line EMI Suppression and RC Networks
P295 Series Metallized Impregnated Paper, Class Y1, 500 VAC
KEMET Electronic Corporation Sales Offices
Forꢀaꢀcompleteꢀlistꢀofꢀourꢀglobalꢀsalesꢀof ꢀces,ꢀpleaseꢀvisitꢀwww.kemet.com/sales.
Disclaimer
Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀ
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀ
applications,ꢀbutꢀareꢀnotꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀ
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
F3088_P295_Y1_500 • 10/18/2016 12
相关型号：
P295BL252M500A
Paper Capacitor, Paper, 1500V, 20% +Tol, 20% -Tol, 0.0025uF, Through Hole Mount, RADIAL LEADED
KEMET
P295BL272M500A
Paper Capacitor, Paper, 1500V, 20% +Tol, 20% -Tol, 0.0027uF, Through Hole Mount, RADIAL LEADED
KEMET
P295BQ472M500A
Film, Metallized Paper, Safety, P295, 4700 pF, 20%, 1,500 V, 500 V, 115C, Lead Spacing = 15mm
KEMET
©2020 ICPDF网 联系我们和版权申明