PME271YC4100KR30 [KEMET]
PME271Y AâE Series Metallized Impregnated Paper, Class Y2, 300 VAC;型号: | PME271YC4100KR30 |
厂家: | KEMET CORPORATION |
描述: | PME271Y AâE Series Metallized Impregnated Paper, Class Y2, 300 VAC |
文件: | 总14页 (文件大小:1769K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AC Line EMI Suppression and RC Networks
PME271Y A–E Series Metallized Impregnated Paper,
Class Y2, 300 VAC
Overview
Applications
The PME271Y A–E Series is constructed of multilayer metallized
paper encapsulated and impregnated in self-extinguishing
material meeting the requirements of UL 94 V–0.
Typical applications include worldwide use as electromagnetic
interference suppressor in all Y2 applications, line-to-earth.
Benefits
• Approvals: ENEC, UL, cUL, CQC
• Rated voltage: 300 VAC 50/60 Hz
• Capacitance range: 0.001 – 0.15 µF
• Lead spacing: 10.2 – 25.4 mm
•ꢀ Capacitanceꢀtolerance:ꢀ±20%ꢀforꢀCꢀ>ꢀ0.1ꢀµF,ꢀ±10%ꢀforꢀCꢀ≤ꢀ0.1ꢀµF
• Climatic category: 40/115/56/B, IEC 60068–1
• Tape and reel packaging in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ−40˚Cꢀtoꢀ+115˚C
• 100% screening factory test at 3,000 VDC
•ꢀ Theꢀhighestꢀpossibleꢀsafetyꢀregardingꢀactiveꢀandꢀpassiveꢀflammability
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Legacy Part Number System
PME271
Series
Y
A
4100
M
R30
Capacitance
Tolerance
Rated Voltage (VAC)
Y = 300
Lead Spacing (mm)
Capacitance Code (pF)
Packaging
Y2, Metallized Paper
A = 10.2
B = 15.2
C = 20.3
D = 22.5
E = 25.4
The last three digits
representꢀsignificantꢀfigures.ꢀ K = ±10% (for C > 0.1 µF)
Theꢀfirstꢀdigitꢀspecifiesꢀtheꢀ
Mꢀ=ꢀ±20%ꢀ(forꢀCꢀ≤ꢀ0.1ꢀµF)
See Ordering
Options Table
total number of digits.
New KEMET Part Number System
300
P
272
H
E
102
M
A
Capacitor
Class
Lead Spacing
(mm)
Capacitance
Tolerance
Rated Voltage
(VAC)
Series
Size Code
Capacitance Code (pF)
Packaging
P = Paper Y2, Metallized H = 10.2
See Dimension First two digits represent
Mꢀ=ꢀ±20%ꢀ(forꢀCꢀ≤ꢀ0.1ꢀµF)
K = ±10% (for C > 0.1 µF)
300 = 300
See Ordering
Options Table
Paper
Q = 15.2
C = 20.3
D = 22.5
E = 25.4
Table
significantꢀfigures.ꢀThirdꢀ
digitꢀspecifiesꢀnumberꢀofꢀ
zeros.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
1
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Benefits cont'd
• Excellent self-healing properties ensure long life even when
subjected to frequent over-voltages
• Good resistance to ionization due to impregnated dielectric
• High dV/dt capability
• Impregnated paper ensures excellent stability and reliability
properties, particularly in applications with continuous operation
Ordering Options Table
Lead
KEMET
Legacy
Spacing
Nominal
(mm)
Lead Length Lead and Lead and
Type of Leads and Packaging
(mm)
Packaging Packaging
Code
Code
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6ꢀ+0/−1
30ꢀ+5/−0
C
A
L
R06
R30
Bulk (Bag) – Max Length Leads
Tape & Reel (Standard Reel)
10.2
H0=ꢀ18.5ꢀ+/−0.5
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/−0.5
H0=ꢀ16.5ꢀ+/−0.5
P
R19T1
Native 10.2
formed to 7.5
Ammo Pack
LAF3
R30XA
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
6ꢀ+0/−1
30ꢀ+5/−0
C
A
L
R06
R30
Bulk (Bag) – Max Length Leads
Tape & Reel (Standard Reel)
15.2
20.3
22.5
H0=ꢀ18.5ꢀ+/−0.5
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/−0.5
P
R19T1
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
6ꢀ+0/−1
30ꢀ+5/−0
C
A
L
R06
R30
Bulk (Bag) – Max Length Leads
Tape & Reel (Standard Reel)
H0=ꢀ18.5ꢀ+/−0.5
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/−0.5
P
R19T1
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
6ꢀ+0/−1
30ꢀ+5/−0
C
A
L
R06
R30
Bulk (Bag) – Max Length Leads
Tape & Reel (Standard Reel)
H0=ꢀ18.5ꢀ+/−0.5
R19T0
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/−0.5
P
R19T1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
2
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Ordering Options Table cont'd
Lead
Spacing
Nominal
(mm)
KEMET
Legacy
Lead Length Lead and Lead and
Type of Leads and Packaging
(mm)
Packaging Packaging
Code
Code
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
25.4
6ꢀ+0/−1
C
A
R06
R30
Bulk (Bag) – Max Length Leads
30ꢀ+5/−0
Dimensions – Millimeters
FRONT VIEW
L
SIDE VIEW
B
H
d
LL
p
p
B
H
L
d
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
Nominal
Tolerance
10.2
10.2
10.2
15.2
15.2
15.2
20.3
20.3
20.3
22.5
22.5
22.5
25.4
25.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
+/−0.4
3.9
4.1
5.1
5.2
5.5
7.3
7.6
9
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
7.5
8.2
10.5
10.5
11
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
13.5
13.5
13.5
18.5
18.5
18.5
24
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
Maximum
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
+/−0.05
13
14
15
24
11.3
8
16.5
17
24
27
10
19
27
12
22
27
12.1
15.3
19
30.5
30.5
22
1
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
3
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Performance Characteristics
Rated Voltage
Capacitance Range
Capacitance Tolerance
Temperature Range
Climatic Category
Approvals
300 VAC 50/60 Hz
0.001 – 0.15 µF
±ꢀ20%ꢀforꢀCꢀ≤ꢀ0.1µF,ꢀꢀ±ꢀ10%ꢀforꢀCꢀ>ꢀ0.1µF
−40ºCꢀtoꢀ+115°C
40/115/56/B
ENEC, UL, CSA, CQC
MaximumꢀValuesꢀatꢀ+23°C
1 kHz
Dissipation Factor
1.3%
The 100% screening factory test is carried out at 3,000 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test. It is not permitted to repeat this test as there is a risk
to damage the capacitor. KEMET is not liable in such case for any
failures.
Test Voltage Between Terminals
Minimum Value Between Terminals
≥ꢀ12,000ꢀMΩ
Insulation Resistance
In DC Applications
Recommendedꢀvoltageꢀ≤ꢀ1,000ꢀVDC
Environmental Test Data
Test
Vibration
IEC Publication
Procedure
IEC 60068–2–6 Test Fc
IEC 60068–2–29 Test Eb
IEC 60068–2–20 Test Ta
IEC 60384–14
3 directions at 2 hours each 10 – 500 Hz at 0.75 mm or 98 m/s2
Bump
4,000 bumps at 390 m/s2
Solderability
Active Flammability
Passive Flammability
Humidity
Solder globule method
IEC 60384–14
Needle-flameꢀtest
IEC 60068–2–3 Test Ca
+40°Cꢀandꢀ90ꢀ–ꢀ95%ꢀRH
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
4
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Approvals
Mark
Specification
File Number
EN/IEC 60384-14
SE/0140-27D
UL 60384-14
CAN/CSA-E60384-14-09
E73869
CQC
10001043354
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
Table 1 – Ratings & Part Number Reference
Maximum Dimensions in mm
Capacitance
Value (µF)
Lead
fo
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part
Number
Spacing (p) (MHz)
B
H
L
0.0010
0.0015
0.0022
0.0025
0.0033
0.0047
0.0068
0.0100
0.0150
0.0220
0.0330
0.0470
0.0680
0.0330
0.0470
0.0680
0.1000
0.1000
0.1500
3.9
3.9
3.9
4.1
4.1
5.1
5.2
5.2
5.5
7.3
7.6
9
11.3
8
8
10
12
7.5
7.5
7.5
8.2
8.2
10.5
10.5
10.5
11
13
14
15
16.5
17
13.5
13.5
13.5
13.5
13.5
13.5
18.5
18.5
18.5
18.5
24
24
24
27
27
27
27
30.5
30.5
10.2
10.2
10.2
10.2
10.2
10.2
15.2
15.2
15.2
15.2
20.3
20.3
20.3
22.5
22.5
22.5
22.5
25.4
25.4
53.0
44.0
37
35
30
24
19
16
13
9.8
7
6
4.6
6.8
5.8
4.8
3.8
3.9
3.1
2000
2000
2000
2000
2000
2000
1400
1400
1400
1400
1000
1000
1000
600
P272HE102M300(1)
P272HE152M300(1)
P272HE222M300(1)
P272HH252M300(1)
P272HH332M300(1)
P272HL472M300(1)
P272QE682M300(1)
P272QE103M300(1)
P272QH153M300(1)
P272QM223M300(1)
P272CE333M300(1)
P272CJ473M300(1)
P272CP683M300(1)
P272SJ333M300(1)
P272SJ473M300(1)
P272SP683M300(1)
P272SU104M300(1)
P272EJ104M300(1)
P272EL154K300(1)
PME271YA4100M(1)
PME271YA4150M(1)
PME271YA4220M(1)
PME271YA4250M(1)
PME271YA4330M(1)
PME271YA4470M(1)
PME271YB4680M(1)
PME271YB5100M(1)
PME271YB5150M(1)
PME271YB5220M(1)
PME271YC5330M(1)
PME271YC5470M(1)
PME271YC5680M(1)
PME271YD5330M(1)
PME271YD5470M(1)
PME271YD5680M(1)
PME271YD6100M(1)
PME271YE6100M(1)
PME271YE6150K(1)
17
19
22
19
600
600
600
400
12.1
15.3
22
400
Capacitance
Value (µF)
Lead Spacing
(p)
dV/dt
(V/µs)
New KEMET
Part Number
B (mm)
H (mm)
L (mm)
fo (MHz)
Legacy Part Number
(1) Insert ordering code for lead type and packaging. See Ordering Options Table for available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
5
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has
increasedꢀtheꢀliquidusꢀtemperatureꢀfromꢀthatꢀofꢀ183ºCꢀforꢀSnPbꢀeutecticꢀalloyꢀtoꢀ217ꢀ–ꢀ221ºCꢀforꢀtheꢀnewꢀalloys.ꢀAsꢀaꢀresult,ꢀtheꢀheatꢀstressꢀ
to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene
capacitorsꢀareꢀespeciallyꢀsensitiveꢀtoꢀheatꢀ(theꢀmeltingꢀpointꢀofꢀpolypropyleneꢀisꢀ160ꢀ–ꢀ170ºC).ꢀWaveꢀsolderingꢀcanꢀbeꢀdestructive,ꢀespeciallyꢀ
for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The
recommendedꢀsolderꢀprofilesꢀfromꢀKEMETꢀshouldꢀbeꢀused.ꢀPleaseꢀconsultꢀKEMETꢀwithꢀanyꢀquestions.ꢀInꢀgeneral,ꢀtheꢀwaveꢀsolderingꢀcurveꢀ
from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1.
Reflowꢀsolderingꢀisꢀnotꢀrecommendedꢀforꢀthrough-holeꢀfilmꢀcapacitors.ꢀExposingꢀcapacitorsꢀtoꢀaꢀsolderingꢀprofileꢀinꢀexcessꢀofꢀtheꢀaboveꢀtheꢀ
recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-
holeꢀpartsꢀafterꢀtheꢀcuringꢀofꢀsurfaceꢀmountꢀparts.ꢀConsultꢀKEMETꢀtoꢀdiscussꢀtheꢀactualꢀtemperatureꢀprofileꢀinꢀtheꢀoven,ꢀifꢀthrough-holeꢀ
components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the
capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
300
Following is the recommendation for manual
soldering with a soldering iron.
2+3s max
260°C
250
200
150
100
50
Firstwave
Second wave
Recommended Soldering Temperature
ΔT <150°C
Cooling
400
Preheating
ca 2°C/s
350
300
250
200
150
100
50
ca 3.5°C/s typical
ca 5°C/s
115°C max
Tpreheat
100°C
Typical
0
0
40
80
120
160
200
240
Time (s)
0
0
1
2
3
4
5
6
7
8
Soldering time (sec)
The soldering iron tip temperature should be set
atꢀ350°Cꢀ(+10°Cꢀmaximum)ꢀwithꢀtheꢀsolderingꢀ
duration not to exceed more than 3 seconds.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
6
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1
Maximum
Maximum Preheat
Peak Soldering
Temperature
Temperature
Dielectric
Film Material
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
Pitch
≤ꢀ10ꢀmm = 15 mm > 15 mm ≤ꢀ15ꢀmm > 15 mm
Polyester
Polypropylene
Paper
130°C
100°C
130°C
130°C
110°C
130°C
130°C
130°C
140°C
270°C
260°C
270°C
270°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Maximum temperature
Dielectric Film Material
measured inside the element
Polyester
Polypropylene
Paper
160°C
110°C
160°C
160°C
Polyphenylene sulphide
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectiveꢀdipꢀsolderingꢀisꢀaꢀvariationꢀofꢀreflowꢀsoldering.ꢀInꢀthisꢀmethod,ꢀtheꢀprintedꢀcircuitꢀboardꢀwithꢀthrough-holeꢀcomponentsꢀtoꢀbeꢀ
solderedꢀisꢀpreheatedꢀandꢀtransportedꢀoverꢀtheꢀsolderꢀbathꢀasꢀinꢀnormalꢀflowꢀsolderingꢀwithoutꢀtouchingꢀtheꢀsolder.ꢀWhenꢀtheꢀboardꢀisꢀ
over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected
components, and pressed against the lower surface of the board to solder the components.
Theꢀtemperatureꢀprofileꢀforꢀselectiveꢀsolderingꢀisꢀsimilarꢀtoꢀtheꢀdoubleꢀwaveꢀflowꢀsolderingꢀoutlinedꢀinꢀthisꢀdocument,ꢀhowever, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
inꢀdoubleꢀwaveꢀflowꢀsoldering,ꢀandꢀgreatꢀcareꢀmustꢀbeꢀtakenꢀsoꢀthatꢀtheꢀpartsꢀareꢀnotꢀoverheated.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
7
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Construction
Detailed Cross Section
Self-Extinguishing
Resin
Metallized Impregnated Paper
(First Layer)
Self-Extinguishing
Resin
Metallized Impregnated Paper
(Second Layer)
Margin
Margin
Metal Contact
Layer
Margin
Leads
Metal Contact
Layer
Winding Scheme
Metallization
Metal
Spraying
Material
Impregnated
Paper
Single Design — Multilayer Impregnated Paper Dielectric
1 Section
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
8
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Marking
FRONT
BACK
Self
Healing
Voltage
Series
Approval
Mark
Approval
Mark
IEC Climatic
Category
Manufacturing
Date Code
TOP
Capacitance
Safety Class
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
9
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Packaging Quantities
Lead Spacing Thickness Height Length
Bulk
Bulk
Standard Reel Large Reel
Ammo
Formed
800
(mm)
(mm)
(mm)
(mm)
Short Leads Long Leads
ø 360 mm
ø 500 mm
3.9
7.5
13.5
2000
2000
1600
1000
1000
800
700
1400
4.1
8.2
13.5
600
780
10.2
5.1
10.5
13.5
600
1200
630
5.5
6.5
7.5
8.5
5.2
5.5
6
12.5
12.5
14.5
16
18
18
1000
600
600
400
500
400
400
250
500
500
400
400
400
300
600
400
400
400
600
500
400
400
400
350
18
18
10.5
11
18.5
18.5
18.5
18.5
18.5
18.5
1000
1000
600
600
600
500
15.2
12.5
13
7.3
7.8
8.5
800
13.5
14.3
7.6
8.4
9
14
14
24
24
24
24
1500
1200
1500
1000
250
200
200
150
250
250
250
180
500
500
20.3
22.5
25.4
15
11.3
16.5
400
8
17
19
22
27
27
27
1200
1000
800
200
150
100
10
12
200
180
350
10.6
10.5
12.1
15.3
16.1
17.3
19
30.5
30.5
30.5
30.5
1000
1000
800
150
100
100
75
22
600
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016 10
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Lead Taping & Packaging (IEC 60286–2)
Lead Spacing 20.3 – 22.5 mm
Lead Spacing 10.2 – 15.2 mm
0
0
Formed Leads from 10.2 to 7.5 mm
0
Taping Specification
Dimensions in mm
Standard IEC 60286–2
Formed
7.5
Lead spacing
+6/-0.1
F
10.2
15.2
20.3
22.5
F
Carrier tape width
Hold-down tape width
Position of sprocket hole
Distance between tapes
Sprocket hole diameter
Feed hole lead spacing
Distance lead – feed hole
Deviation tape – plane
Lateral deviation
+/-0.5
+/-0.3
W
W0
W1
W2
D0
18
18
12
18
12
18
12
18
12
18+1/-0.5
9
+/-0.5
9
9
9
9
9
9+0.75/-0.5
3
Maximum
+/-0.2
3
3
3
3
3
4
4
4
4
4
4
(1)
+/-0.3
P0
P1
12.7(4)
3.75
1.3
2
12.7
7.6
1.3
2
12.7
5.1
1.3
2
12.7
8.9
1.3
2
12.7
5.3
1.3
2
12.7
P1
+/-0.7
Maximum
Maximum
+/-0.2
∆p
∆h
t
1.3
2
Total thickness
0.7
18+2/-0
35
0.7
18+2/-0
35
0.7
18+2/-0
35
0.7
18+2/-0
35
0.9MAX
18.5+/-0.5
58
0.9MAX
18+2/-0
58MAX
(2)
Sprocket hole/cap body
Sprocket hole/top of cap body
Nominal
Maximum
H0
H1(3)
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) Depending on case size.
(4) 15 mm available on request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016 11
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Specifications
Dimensions (mm)
Series
H
W
T
R4x,ꢀR4x+R,ꢀR7x,ꢀRSB
F5A, F5B, F5D
H
360
330
340
330
59
50
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
W
T
Reel Specifications
Dimensions (mm)
Series
D
H
W
R4x,ꢀR4x+R,ꢀR7x,ꢀRSB
F5A, F5B, F5D
F6xx, F8xx
355
500
30
25
55 (Max)
H
D
360
500
PHExxx, PMExxx, PMRxxx
30
46 (Max)
Manufacturing Date Code (IEC–60062)
W
Y = Year, Z = Month
Year
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
Code
M
N
P
R
S
T
U
V
Month
January
February
March
April
May
Code
1
2
3
4
5
6
7
8
9
O
N
D
June
July
August
September
October
November
December
W
X
A
B
C
D
E
F
H
J
K
L
M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016 12
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835ꢀKEMETꢀWay
Simpsonville, SC 29681
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Beijing, China
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Tel: 86-10-5877-1075
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Shanghai, China
Tel: 86-21-6447-0707
Kamen, Germany
Tel: 49-2307-438110
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Seoul, South Korea
Tel: 82-2-6294-0550
Northern Europe
Wyboston,ꢀUnitedꢀKingdomꢀ
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
North America
Northeast
Wilmington,ꢀMA
Tel: 978-658-1663
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
Southeast
Lake Mary, FL
Tel: 407-855-8886
Penang, Malaysia
Tel: 60-4-6430200
Central
Novi, MI
Tel: 248-994-1030
Bangalore, India
Tel: 91-806-53-76817
Irving, TX
Tel: 972-915-6041
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016 13
Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Disclaimer
Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀcheckingꢀandꢀ
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀapplications,ꢀbutꢀareꢀ
notꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀTheꢀInformationꢀisꢀintendedꢀforꢀuseꢀonlyꢀ
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016 14
相关型号:
©2020 ICPDF网 联系我们和版权申明