R41.3N.3150.00.00.M [KEMET]
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED;型号: | R41.3N.3150.00.00.M |
厂家: | KEMET CORPORATION |
描述: | Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED 电容器 |
文件: | 总2页 (文件大小:129K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
R.41
Loose
Taped
Fig.1
Fig.2
Y2 / X1 CLASS (EN132400)
MKP (300Vac) / MKT (250Vac) Series
METALLIZED POLYESTER AND
POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: Interference suppression and
«across-the-line» and «line to ground» applications.
Suitable for use in situations where failure of the capacitor
could lead to danger of electric shock.
PRODUCT CODE: R41
p = 10
0.6
p = 15
0.8 (250Vac)
p = 37.5
1
15<p27.5
∅ d 0.05
0.6 (300Vac)
0.8
All dimensions are in mm.
GENERAL TECHNICAL DATA
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Dielectric: polyester film (PET) for 250 Vac,
Test conditions
polypropylene film for 300Vac
Temperature:
+40 2_C
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Relative humidity (RH):
Test duration:
93 2%
Leads: tinned wire.
56 days
Performance
Protection: plastic case, epoxy resin filled. Box material is
solvent resistant and flame retardant according to UL94 V0.
Marking : Manufacturer’s logo, series, capacitance,
tolerance, rated voltage, capacitor class, dielectric code,
climatic category, passive flammability category,
manufacturing date code, approvals, manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to+110_C
Related documents: IEC 60384-14 2nd edition 1993,
+ amendment A1: 1995; EN132400.
Dielectric strength:
no dielectric breakdown or
flashover at 1500Vac/1 min
Capacitance change |∆C/C|: ≤5%
Insulation resistance:
≥50% of initial limit.
Endurance:
Test conditions
Temperature:
110_C2_C
Test duration:
Voltage applied:
Performance
1000 h
1.7×V + 1000Vac 0.1 s/h
R
ELECTRICAL CHARACTERISTICS
Dielectric strength:
no dielectric breakdown or
flashover at 1500Vac/1 min
Rated voltage (V ):
250Vac and 300Vac; 50/60Hz
0.001mF to 0.1mF (250Vac)
0.001mF to 1.0mF (300Vac)
R
Capacitance range:
Capacitance change |∆C/C|: ≤10%
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
10% (K); 20% (M).
Insulation resistance:
Resistance to soldering heat:
Test conditions
≥50% of initial limit.
Dissipation factor (DF):
Solder bath temperature:
+260_C5_C
-4
-4
Dipping time (with heat screen):10 s1 s
tgδ×10 at +25_C 5_C: ≤100 (60)* at 1kHz (250Vac)
Performance
tgδ×10 at +25_C 5_C: ≤010 (06)* at 1kHz (300Vac)
Capacitance change |∆C/C|: ≤2%
* Typical value
APPROVALS
Insulation resistance:
Test conditions
ENEC-IMQ
EN 132400
File No. V4160
File No. IT-1409
Temperature:
Voltage charge time:
Voltage charge:
Performance
4
+25_C5_C
1 min
Class Y2 / X1
(*)
CB
100 Vdc
Across-the-line
or
CSA C22.2 N_1
File No. LR83890
File No. E 97797
4
5
)
)
≥3×10 MΩ (5×10 MΩ * (250Vac)
line-to-ground
5
≥1×10 MΩ (5×10 MΩ * for C 0.33mF (300Vac)
Across-the-line
or
≥30000 s
(150000 s)*
for C >0.33mF (300Vac)
UL 1414
* Typical value
line-to-ground
Test voltage between terminations (on all pieces):
2500Vac for 1 s + 5000Vdc for 1 s at +25_C5_C
CCEE IEC60384-14 Class Y2 / X1
File No.CH0045034-2000
Winding scheme
Approved according to EN132400 (IEC 60384-14 2nd ed.
1993 plus Amendment A1: 1995).
300Vac
250Vac (*)
According to IEC 60065.
(*) ENEC mark has replaced all the following European
National marks:
single sided metallized
polypropylene film
single sided metallized
polyester film
(*) For new designs we suggest the use of the 300Vac version
July 2, 2001
ARCOTRONICS ITALIA SpA Tel. +39051 939111 Fax +39051 939479 E--MAIL: arcoven@arcotronics.com
R.41
Y2 / X1 CLASS (EN132400)
MKP (300Vac) / MKT (250Vac) Series
METALLIZED POLYESTER AND
POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: Interference suppression and
«across-the-line» and «line to ground» applications.
Suitable for use in situations where failure of the capacitor
could lead to danger of electric shock.
PRODUCT CODE: R41
Max dv/dt
at 350Vdc
Max dv/dt
300 Vac
250 Vac
Rated
Cap.
Rated
Cap.
at 420Vdc
Part Number
Part Number
(V/ ms)
500
500
500
500
500
500
500
500
500
500
500
500
500
(V/ ms)
B
H
L
p
B
H
L
p
1000 pF
1500 pF
2200 pF
3300 pF
4700 pF
6800 pF
0.010 mF
0.015 mF
0.022 mF
0.033 mF
0.047 mF
0.068 mF
4.0
4.0
4.0
9.0 13.0 10.0
9.0 13.0 10.0
9.0 13.0 10.0
R41.LF.1100.- -.00.-
R41.LF.1150.- -.00.-
R41.LF.1220.- -.00.-
R41.LF.1330.- -.00.-
R41.LF.1470.- -.00.-
R41.LF.1680.- -.00.-
R41.LI. 2100 - -.00.-
R41.LI. 2150 - -.00.-
R41.LI. 2220.- -.00.-
R41.LI. 2330.- -.00.-
R41.LN.2470.- -.00.-
R41.LN.2680.- -.00.-
R41.LN.3100.- -.00.-
1000 pF
1500 pF
2200 pF
3300 pF
4700 pF
4700 pF
6800 pF
4.0
4.0
4.0
9.0 13.0 10.0
9.0 13.0 10.0
9.0 13.0 10.0
800
800
800
800
800
800
800
R41.3F.1100.- -.00.-
R41.3F.1150.- -.00.-
R41.3F.1220.- -.00.-
R41.3F.1330.- -.00.-
R41.3F.1470.- -.M1.M
R41.3F.1470.- -.00.-
R41.3F.1680.- -.00.-
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
6.0 12.0 13.0 10.0
0.010 mF
0.015 mF
0.022 mF
0.033 mF
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
600
600
600
600
600
R41.3I. 2100 - -.00.-
R41.3I. 2150 - -.00.-
R41.3I. 2220.- -.00.-
R41.3I. 2330.- -.00.-
R41.3I. 2470.- -.00.-
0.047 mF 10.0 16.0 18.0 15.0
0.068 mF 7.0 16.0 26.5 22.5
0.10 mF 10.0 18.5 26.5 22.5
500
500
500
500
R41.3N.2680.- -.00.-
R41.3N.3100.- -.00.-
R41.3N.3150.- -.00.-
R41.3N.3220.- -.00.-
0.10 mF 10.0 18.5 26.5 22.5
0.15 mF 11.0 20.0 26.5 22.5
0.22 mF 13.0 22.0 26.5 22.5
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
All dimensions are in mm.
0.22 mF 13.0 22.0 32.0 27.5
0.33 mF 14.0 28.0 32.0 27.5
0.47 mF 18.0 33.0 32.0 27.5
0.68 mF 18.0 33.0 32.0 27.5
0.47 mF 13.0 24.0 41.5 37.5
0.68 mF 16.0 28.5 41.5 37.5
1.0 mF 20.0 40.0 41.5 37.5
400
400
400
400
300
300
300
R41.3R.3220.- -.00.M
R41.3R.3330.- -.00.-
R41.3R.3470.- -.00.-
R41.3R.3680.- -.00.-
R41.3W3470.- -.00.-
R41.3W3680.- -.00.-
R41.3W4100.- -.00.-
Table 1
Standard packaging
Lead
Taping style
Ordering code
style
length
P
Fig.
(No.)
Pitch
(mm)
2
(Digit 10 to 11)
(mm)
(mm)
12.70
19.05
12.70
19.05
AMMO-PACK
AMMO-PACK
REEL ∅ 355mm
REEL ∅ 500mm
Loose, short leads
1
2
1
2
10.0/15.0
22.5
10.0/15.0
22.5/27.5
DQ
DQ
CK
CK
00
+2
44
Loose, long leads
1
25
JY
(p=10mm)
Loose, long leads
+5
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
30
50
(p≥15mm)
Note:Ammo--pack is the preferred packaging for taped
version
July 2, 2001
ARCOTRONICS ITALIA SpA Tel. +39051 939111 Fax +39051 939479 E--MAIL: arcoven@arcotronics.com
相关型号:
R41.3N.3150.CK.00.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.3N.3150.DQ.00.K
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.3N.3150.JY.00.K
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.3N.3220.00.00.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.22uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.3N.3220.50.00.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.22uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.3N.3220.DQ.00.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.22uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.3N.3220.JY.00.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.22uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.LF.1330.00.00.M
Film Capacitor, Polyester, 20% +Tol, 20% -Tol, 0.0033uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.LN.2470.DQ.00.K
Film Capacitor, Polyester, 10% +Tol, 10% -Tol, 0.047uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.LN.2470.DQ.00.M
Film Capacitor, Polyester, 20% +Tol, 20% -Tol, 0.047uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.LN.2470.JY.00.K
Film Capacitor, Polyester, 10% +Tol, 10% -Tol, 0.047uF, Through Hole Mount, RADIAL LEADED
KEMET
R41.LN.2470.JY.00.M
Film Capacitor, Polyester, 20% +Tol, 20% -Tol, 0.047uF, Through Hole Mount, RADIAL LEADED
KEMET
©2020 ICPDF网 联系我们和版权申明