R413N310000M1M [KEMET]
Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED;型号: | R413N310000M1M |
厂家: | KEMET CORPORATION |
描述: | Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED 电容器 |
文件: | 总14页 (文件大小:552K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC
(Automotive Grade)
Overview
Applications
TheꢀR41ꢀSeriesꢀisꢀconstructedꢀofꢀmetallizedꢀpolypropyleneꢀfilmꢀ
encapsulated with self-extinguishing resin in a box of material
meeting the requirements of UL 94 V–0.
For use in electromagnetic interference (EMI) suppression
filterꢀꢀinꢀacross-the-lineꢀapplicationsꢀrequiringꢀY2ꢀ/ꢀX1ꢀsafetyꢀ
classification.ꢀIntendedꢀforꢀuseꢀinꢀsituationsꢀwhereꢀcapacitorꢀ
failure would not result in exposure to electric shock. Not for use
in "series with mains" type applications.
Automotive Grade devices are available (up to 22.5 mm Lead
Spacing) and meet the demanding Automotive Electronics
Council'sꢀAEC–Q200ꢀqualificationꢀrequirements.
Benefits
• Approvals: ENEC, UL, cUL, CQC
• Class Y2 / X1 (IEC 60384-14)
• Rated voltage: 300 VAC 50/60 Hz
• Capacitance range: 0.001 – 1 µF
• Lead spacing: 7.5 – 37.5 mm (7.5 mm in progress)
• Capacitance tolerance: ±20%, ±10%
• Climatic category: 40/110/56, IEC 60068–1
• Tape and reel in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ-40˚Cꢀtoꢀ+110˚C
• 100% screening factory test at 5,000 VDC/2,500 VAC
• Self-healing properties
• Automotive (AEC–Q200) grades available up to 22.5 mm Lead Spacing
Part Number System
R41
3
I
2330
00
M1
M
Rated Voltage
(VAC)
Lead Spacing
(mm)
Lead and
Packaging Code
Capacitance
Tolerance
Series
Capacitance Code (pF)
Internal Use
Y2, Metallized
Polypropylene
3 = 300
D = 7.5
F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
Digits 2 – 4 indicate the
firstꢀthreeꢀdigitsꢀofꢀtheꢀ
capacitance value.
First digit indicates the
number of zeros to be
added.
See Ordering
Options Table
00
M1
K = ±10%
M = ±20%
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014
1
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Ordering Options Table
Lead Spacing
Lead Length
(mm)
Lead and
Packaging Code
Type of Leads and Packaging
Nominal (mm)
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
Ammo Pack
4ꢀ+2/-0
00
H0=ꢀ18.5ꢀ+/-0.5
DQ
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/-0.5
3.5ꢀ+0.5/-0
4.0ꢀ+0.5/-0
3.2ꢀ+0.3/-0.2
18ꢀ+1/-1
CK
JB
JE
JH
JM
40
50
10,
15,
22.5
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Long Leads
Bulk (Bag) – Long Leads
Bulk (Bag) – Long Leads
30ꢀ+5/-0
25ꢀ+2/-1
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4ꢀ+2/-0
00
Tape & Reel (Large Reel)
H0=ꢀ18.5ꢀ+/-0.5
CK
27.5
37.5
Other Lead and Packaging Options
Bulk (Bag) – Long Leads
30ꢀ+5/-0
25ꢀ+2/-1
40
50
Bulk (Bag) – Long Leads
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4ꢀ+2/-0
00
Other Lead and Packaging Options
Bulk (Bag) – Long Leads
30ꢀ+5/-0
25ꢀ+2/-1
40
50
Bulk (Bag) – Long Leads
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014
2
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Dimensions – Millimeters
Loose
B
L
H
d
LL
p
p
B
H
L
d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
7.5
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
+/-0.4
4.0
5.0
+0.1
+0.1
+0.1
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.3
+0.3
+0.3
9.0
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
10.0
10.0
10.5
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
41.5
41.5
41.5
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.3
+0.3
+0.5
+0.5
+0.5
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
+/-0.05
7.5
10.5
12.0
9.0
7.5
6.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
37.5
37.5
37.5
4.0
5.0
11.0
12.0
11.0
12.0
13.5
14.5
19.0
15.0
16.0
17.0
18.5
22.0
22.0
28.0
33.0
24.0
28.5
40.0
6.0
5.0
6.0
7.5
8.5
11.0
6.0
7.0
8.5
10.0
13.0
13.0
14.0
18.0
13.0
16.0
20.0
Note: See Ordering Options Table for lead length (LL/H0) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014
3
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Performance Characteristics
Dielectric
Plates
Polypropyleneꢀfilm
Metal layer deposited by evaporation under vacuum
Winding
Non-inductive type
Leads
Tinned wire
Protection
Plasticꢀcase,ꢀthermosettingꢀresinꢀfilled.ꢀBoxꢀmaterialꢀisꢀsolventꢀresistantꢀandꢀflameꢀretardantꢀaccordingꢀtoꢀUL94.
Related Documents
Rated Voltage (VR)
Capacitance Range
Capacitance Values
Capacitance Tolerance
Temperature Range
Climatic Category
Approvals
IEC 60384-14, EN 60384-14
300 VAC (50/60 Hz), 1,000 VDC
0.0010 µF to 1 µF
E6 series (IEC 60063)
±10%, ±20%
-40ºCꢀtoꢀ+110°C
40/110/56 IEC 60068-1
ENEC, UL, cUL, CQC
DissipationꢀFactorꢀ(tanδ)
≤ꢀ0.3%ꢀ(0.2%*)ꢀ@ꢀ1kHzꢀ,ꢀ+25°Cꢀ±5°Cꢀ(*ꢀtypicalꢀvalue)
The 100% screening factory test is carried out at 5,000 VDC/2,500 VAC. The voltage level is selected to meet the
requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not
permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures.
Test Voltage Between Terminals
Measuredꢀatꢀ+25°Cꢀ±5°C,ꢀaccordingꢀtoꢀIECꢀ60384–2
Minimum Values Between Terminals
Insulation Resistance
In DC Applications
Voltage Charge
100 VDC
Voltage Charge Time
1 min
Cꢀ≤ꢀ0.33ꢀμF
Cꢀ>ꢀ0.33ꢀμF
≥ꢀ1ꢀ•ꢀ105ꢀMΩ
(ꢀ≥ꢀ5ꢀ•ꢀ105ꢀMΩꢀ)*
*ꢀtypicalꢀvalue
≥ꢀ30,000ꢀMΩꢀ•ꢀµF
(ꢀ≥ꢀ150,000ꢀMΩꢀ•ꢀµFꢀ)*
*ꢀtypicalꢀvalue
Recommendedꢀvoltageꢀ≤ꢀ1,000ꢀVDC
Qualification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test
methodsꢀandꢀconditionsꢀareꢀreferencedꢀinꢀdocumentꢀAEC–Q200,ꢀStressꢀTestꢀQualificationꢀforꢀPassiveꢀComponents.ꢀForꢀadditionalꢀ
information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014
4
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Impedance Graph
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014
5
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Environmental Test Data
Test
IEC Publication
Procedure
1.7 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second,
1,000 hours at upper rated temperature
Endurance
EN/IEC 60384–14
Vibration
IEC 60068–2–6 Test Fc
IEC 60068–2–29 Test Eb
IEC 60068–2–14 Test Na
IEC 60384–14
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump
1,000 bumps at 390 m/s2
Change of Temperature
Active Flammability
Passive Flammability
Damp Heat Steady State
Upper and lower rated temperature 5 cycles
VRꢀ+ꢀ20ꢀsurgeꢀpulsesꢀatꢀ5ꢀkVꢀ(pulseꢀeveryꢀ5ꢀseconds)
IECꢀ60384–1,ꢀIECꢀ60695–11–5ꢀNeedleꢀflameꢀtest
+40°Cꢀandꢀ93%ꢀRH,ꢀ56ꢀdays
IEC 60384–14
IEC 60068–2–78 Test Cab
Approvals
Mark
Specification
File Number
EN/IEC 60384-14
V41160
UL 60384-14 and
CAN/CSA E60384-14
(300 VAC)
E97797
CQC03001006821
CQC10001050896
CQC12001083744
CQC13001087758
GB/T 14472
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014
6
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Table 1 – Ratings & Part Number Reference
Dimensions in mm
Capacitance
Value (µF)
Lead Spacing
(p)
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part Number
B
H
9.0
9.0
L
0.0010
0.0022
0.0033
0.0047
0.0010
0.0015
0.0022
0.0033
0.0047
0.0068
0.0033
0.0047
0.0068
0.010
0.015
0.022
0.033
0.047
0.068
0.047
0.068
0.068
0.10
4.0
4.0
10.0
10.0
10.0
10.5
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
41.5
41.5
41.5
7.5
7.5
7.5
7.5
800
800
800
800
800
800
800
800
800
800
600
600
600
600
600
600
600
600
600
500
500
500
500
500
500
400
400
400
400
300
300
300
413D1100(1)00(2)
413D1220(1)00(2)
413D1330(1)00(2)
413D1470(1)00(2)
413F1100(1)00(2)
413F1150(1)00(2)
413F1220(1)00(2)
413F1330(1)M1(2)
413F1470(1)M1(2)
413F1680(1)00(3)
413I1330(1)00(2)
413I1470(1)00(2)
413I1680(1)00(2)
413I2100(1)00(2)
413I2150(1)M1(2)
413I2220(1)M1(2)
413I2330(1)M1(2)
413I2470(1)M1(2)
413I2680(1)00(2)
413N2470(1)00(2)
413N2680(1)M1(3)
413N2680(1)00(2)
413N3100(1)M1(2)
413N3150(1)M1(2)
413N3220(1)00(2)
413R3220(1)00(2)
413R3330(1)00(2)
413R3470(1)00(2)
413R3680(1)00(2)
413W 3470(1)00(2)
413W 3680(1)00(2)
413W 4100(1)00(2)
R413D1100(1)00(2)
R413D1220(1)00(2)
R413D1330(1)00(2)
R413D1470(1)00(2)
R413F1100(1)00(2)
R413F1150(1)00(2)
R413F1220(1)00(2)
R413F1330(1)M1(2)
R413F1470(1)M1(2)
R413F1680(1)00(3)
R413I1330(1)00(2)
R413I1470(1)00(2)
R413I1680(1)00(2)
R413I2100(1)00(2)
R413I2150(1)M1(2)
R413I2220(1)M1(2)
R413I2330(1)M1(2)
R413I2470(1)M1(2)
R413I2680(1)00(2)
R413N2470(1)00(2)
R413N2680(1)M1(3)
R413N2680(1)00(2)
R413N3100(1)M1(2)
R413N3150(1)M1(2)
R413N3220(1)00(2)
R413R3220(1)00(2)
R413R3330(1)00(2)
R413R3470(1)00(2)
R413R3680(1)00(2)
R413W 3470(1)00(2)
R413W 3680(1)00(2)
R413W 4100(1)00(2)
5.0
6.0
4.0
10.5
12.0
9.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
4.0
9.0
4.0
9.0
4.0
9.0
5.0
6.0
5.0
5.0
5.0
5.0
5.0
6.0
7.5
8.5
11.0
6.0
6.0
11.0
12.0
11.0
11.0
11.0
11.0
11.0
12.0
13.5
14.5
19.0
15.0
15.0
16.0
17.0
18.5
22.0
22.0
28.0
33.0
33.0
24.0
28.5
40.0
7.0
8.5
0.15
0.22
0.22
0.33
0.47
0.68
0.47
0.68
10.0
13.0
13.0
14.0
18.0
18.0
13.0
16.0
20.0
1.0
Lead
Spacing (p)
New KEMET
Part Number
Capacitance Value (µF)
B (mm)
H (mm)
L (mm)
dV/dt (V/µs)
Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) M = ±20%, K = ±10%
(3) M = ±20% (only available tolerance).
Bold blue text = Under Development (7.5 mm Lead Spacing only)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014
7
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has
increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress
to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene
capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially
for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The
recommendedꢀsolderꢀprofilesꢀfromꢀKEMETꢀshouldꢀbeꢀused.ꢀPleaseꢀconsultꢀKEMETꢀwithꢀanyꢀquestions.ꢀInꢀgeneral,ꢀtheꢀwaveꢀsolderingꢀcurveꢀ
from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1.
Reflowꢀsolderingꢀisꢀnotꢀrecommendedꢀforꢀthrough-holeꢀfilmꢀcapacitors.ꢀExposingꢀcapacitorsꢀtoꢀaꢀsolderingꢀprofileꢀinꢀexcessꢀofꢀtheꢀaboveꢀtheꢀ
recommended limits may result to degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-
holeꢀpartsꢀafterꢀtheꢀcuringꢀofꢀsurfaceꢀmountꢀparts.ꢀConsultꢀKEMETꢀtoꢀdiscussꢀtheꢀactualꢀtemperatureꢀprofileꢀinꢀtheꢀoven,ꢀifꢀthrough-holeꢀ
components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the
capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
300
Following is the recommendation for manual
soldering with a soldering iron.
2+3s max
260°C
250
200
150
100
50
Firstwave
Second wave
Recommended Soldering Temperature
ΔT <150°C
Cooling
400
Preheating
ca 2°C/s
350
300
250
200
150
100
50
ca 3.5°C/s typical
ca 5°C/s
115°C max
Tpreheat
100°C
Typical
0
0
40
80
120
160
200
240
Time (s)
0
0
1
2
3
4
5
6
7
8
Figure 1
Soldering time (sec)
Maximum
Peak Soldering
Temperature
Maximum Preheat
Temperature
The soldering iron tip temperature should be set
atꢀ350°Cꢀ(+10°Cꢀmaximum)ꢀwithꢀtheꢀsolderingꢀ
duration not to exceed more than 3 seconds.
Dielectric
Film Material
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch Pitch Pitch Pitch Pitch
≤ꢀ10ꢀmm = 15 mm > 15 mm ≤ꢀ15ꢀmm > 15 mm
Polyester
130°C
100°C
130°C
110°C
130°C
130°C
270°C
260°C
270°C
270°C
Polypropylene
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014
8
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Soldering Process cont'd
Selective Soldering Recommendations
Selectiveꢀdipꢀsolderingꢀisꢀaꢀvariationꢀofꢀreflowꢀsoldering.ꢀInꢀthisꢀmethod,ꢀtheꢀprintedꢀcircuitꢀboardꢀwithꢀthrough-holeꢀcomponentsꢀtoꢀbeꢀ
solderedꢀisꢀpreheatedꢀandꢀtransportedꢀoverꢀtheꢀsolderꢀbathꢀasꢀinꢀnormalꢀflowꢀsolderingꢀwithoutꢀtouchingꢀtheꢀsolder.ꢀWhenꢀtheꢀboardꢀisꢀ
over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected
components, and pressed against the lower surface of the board to solder the components.
Theꢀtemperatureꢀprofileꢀforꢀselectiveꢀsolderingꢀisꢀsimilarꢀtoꢀtheꢀdoubleꢀwaveꢀflowꢀsolderingꢀoutlinedꢀinꢀthisꢀdocument,ꢀhowever, instead
of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than
inꢀdoubleꢀwaveꢀflowꢀsoldering,ꢀandꢀgreatꢀcareꢀmustꢀbeꢀtakenꢀsoꢀthatꢀtheꢀpartsꢀareꢀnotꢀoverheated.
Marking
• KEMET logo
• Series
• Capacitance
Manufacturing Date Code (IEC 60062)
Y = Year, Z = Month
• Capacitance tolerance
• Rated voltage
• Capacitor class
Year
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
Code
M
N
Month
January
February
March
Code
1
2
3
4
5
6
7
8
9
O
N
D
• Approval marks
P
• Manufacturing date code
• IEC climatic category
•ꢀ Passiveꢀflammabilityꢀclass
• Manufacturing plant
R
April
S
May
T
June
U
July
V
August
September
October
November
December
W
X
A
B
C
D
E
F
H
J
K
L
M
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014
9
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Packaging Quantities
Standard
Reel
ø 355 mm
Lead Spacing Thickness Height Length
Bulk
Bulk
Large Reel
ø 500 mm
Ammo
Taped
(mm)
(mm)
(mm)
(mm)
Short Leads Long Leads
4.0
5.0
6.0
9.0
10.0
10.0
10.5
2000
1500
1000
1500
1000
800
1500
–
–
–
2100
1600
1350
10.5
12.0
1200
7.5
1000
4.0
5.0
6.0
9.0
11.0
12.0
13.0
13.0
13.0
2000
1300
1000
1800
1500
1200
750
600
500
1500
1250
1000
1000
800
10
680
5.0
6.0
7.5
11.0
12.0
13.5
14.5
19.0
18.0
18.0
18.0
18.0
18.0
2000
1750
1000
1000
450
1000
900
700
500
350
600
500
350
300
–
1250
1000
800
800
680
500
440
340
15
8.5
11.0
700
500
6.0
7.0
15.0
16.0
17.0
18.5
22.0
26.5
26.5
26.5
26.5
26.5
805
700
468
396
300
500
500
300
300
200
–
–
–
–
–
700
550
450
350
300
464
380
280
235
–
8.5
22.5
10.0
13.0
13.0
14.0
18.0
22.0
28.0
33.0
32.0
32.0
32.0
480
352
256
288
176
128
–
–
–
300
–
–
–
–
27.5
37.5
–
13.0
16.0
20.0
24.0
28.5
40.0
41.5
41.5
41.5
360
216
126
216
108
84
–
–
–
–
–
–
–
–
–
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014 10
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2)
Figure 1
Figure 2
Figure 3
Lead Spacing 10 mm
Lead Spacing 15 mm
Lead Spacing 22.5 – 27.5 mm
P
P
h
h
P2
ød
P1 P0
F
D0
t
P1
P2
Taping Specification
Dimensions (mm)
Lead Space
Description
Symbol
10
Fig. 1
0.6
15
22.5
Fig. 3
0.8
27.5
Fig. 3
0.8
Tol.
Fig. 2
0.6-0.8
25.4
12.7
5.2
Lead wire diameter
Taping lead space
d
P
±0.05
±1
25.4
12.7
7.7
38.1
12.7
7.8
38.1
12.7
5.3
Feedꢀholeꢀleadꢀspaceꢀ*
Centering of the lead wire
Centering of the body
Leadꢀspacingꢀ(pitch)ꢀ***
Component alignment
P0
P1
P2
F
±0.2ꢀ**
±0.7
12.7
10
12.7
15
19.05
22.5
0
19.05
27.5
0
±1.3
+0.6/-0.1
±2
∆h
0
0
Height of component
from tape center
H0ꢀ****
18.5
18.5
18.5
18.5
±0.5
Carrier tape width
Hold down tape width
Hole position
W
W0
W1
W2
D0
t
18
9
18
10
9
18
10
9
18
10
9
+1ꢀ/ꢀ-0.5
Minimum
±0.5
9
Hold down tape position
Feed hole diameter
Tape thickness
3
3
3
3
Maximum
±0.2
4
4
4
4
0.7
0.7
0.7
0.7
±0.2
* Also available in 15 mm.
** Max 1 mm on 20 lead spaces.
*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request.
**** H0 = 16.5 mm available upon request.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014 11
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Specifications
Dimensions (mm)
H
W
T
360
340
59
H
W
T
Reel Specifications
Dimensions (mm)
Reel Size
D
H
W
Standard
Large
355
30
55 Maximum
500
25
H
D
W
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014 12
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Sasso Marconi, Italy
Tel: 39-051-939111
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Beijing, China
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Tel: 86-10-5829-1711
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Shanghai, China
Tel: 86-21-6447-0707
Kamen, Germany
Tel: 49-2307-438110
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Taipei, Taiwan
Tel: 886-2-27528585
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
North America
Southeast Asia
Singapore
Southeast
Tel: 65-6586-1900
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Penang, Malaysia
Tel: 60-4-6430200
Northeast
Wilmington, MA
Tel: 978-658-1663
Bangalore, India
Tel: 91-806-53-76817
Central
Novi, MI
Tel: 248-306-9353
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014 13
Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Disclaimer
Allꢀproductꢀspecifiꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀcheckingꢀandꢀ
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀapplications,ꢀbutꢀareꢀ
notꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspecifiꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspecifiꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀTheꢀInformationꢀisꢀintendedꢀforꢀuseꢀonlyꢀ
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3100_R41_Y2_300 • 5/20/2014 14
相关型号:
R413N31004000K
Film Capacitor, Polypropylene, 1000V, 10% +Tol, 10% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N310040M1K
Film Capacitor, Polypropylene, 1000V, 10% +Tol, 10% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N310040M1M
Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N31005000K
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N31005000M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N3100CK00M
Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N3100DQ00M
Film Capacitor, Polypropylene, 1000V, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N31500000K
Film Capacitor, Polypropylene, 1000V, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N31505000K
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N31505000M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N3150CK00K
Film Capacitor, Polypropylene, 1000V, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
R413N3150DQ00K
Film Capacitor, Polypropylene, 1000V, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
©2020 ICPDF网 联系我们和版权申明