R46.KR.4150.52.M1.M [KEMET]
Film Capacitor, Polypropylene, 560V, 20% +Tol, 20% -Tol, 1.5uF, Through Hole Mount, RADIAL LEADED;型号: | R46.KR.4150.52.M1.M |
厂家: | KEMET CORPORATION |
描述: | Film Capacitor, Polypropylene, 560V, 20% +Tol, 20% -Tol, 1.5uF, Through Hole Mount, RADIAL LEADED |
文件: | 总10页 (文件大小:550K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Loose
Taped
Fig.1 Fig.2
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRODUCT CODE: R46
2
Insulated rigid leads
Insulated flexible leads 0.5mm
Note: R.46 series has replaced the 1.40 series and 1.47 series.
For new design we suggest the use of the R.46 series.
Pitch Box thickness (B)
Maximum dimensions (mm)
(mm)
(mm)
B max
H max
L max
10.0
15.0
15.0
22.5
27.5
37.5
All
<7.5
≥7.5
All
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
p ≤15
0.6 or 0.8*
22.5 ≤ p ≤ 27.5
p = 37.5
1
Ø d ±0.05
*See size table.
All
0.8
All
All dimensions are in mm.
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
GENERAL TECHNICAL DATA
Dielectric: polypropylene film.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Test conditions 1st
Temperature:
Relative humidity (RH):
Test duration:
+40°C ± 2°C
93% ±2%
56 days
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
+60°C ± 2°C
95% ±2%
500 hours
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Performance
Climatic category: 40/110/56 IEC 60068-1
Dielectric strength:
no dielectric breakdown or
Operating temperature range: -40 to +110°C
flashover at 4.3 x VR (d.c.)/1 min
Related documents:
IEC 60384-14, EN 60384-14.
Capacitance change |∆C/C|:≤5%
Insulation resistance: ≥50% of initial limit.
ELECTRICAL CHARACTERISTICS
Endurance:
Rated voltage (VR):
275Vac (50/60Hz) / 560 Vdc
Test conditions
300Vac (50/60Hz) / 630 Vdc
Temperature:
Test duration:
Voltage applied:
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Capacitance range:
0.01µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Performance
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M);
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|:≤10%
tolerance ±5% (J) available upon request
Dissipation factor (DF):
Insulation resistance:
Resistance to soldering heat:
≥50% of initial limit.
tgδ 10-4 at +25°C ±5°C:
≤10 (6)* at 1kHz
* Typical value
Test conditions
Insulation resistance:
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
+25°C±5°C
1 min
100 Vdc
Performance
Capacitance change |∆C/C|:≤2%
Winding scheme
Performance
≥1x105 MΩ (5x105 MΩ )*
≥30000 s (150000 s)*
* Typical value
for C≤0.33µF
for C>0.33µF
single sided metallized
polypropylene film
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
190
10/2006
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
APPROVALS
Rated Cap.
275 Vac / 560 Vdc
Ø d
Max
Part Number
Std dimensions
ENEC
IEC 60384-14
dv/dt at
390Vdc
Class X2
File No.V4413
(**)
B
H
L
p
(V/ µs)
500
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
100
100
100
100
100
100
100
100
100
CSA
E 384-14
(up to 5.6µF)
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.10 µF
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.10 µF
0.15 µF
0.15 µF
0.22 µF
0.22 µF
0.22 µF
0.33 µF
4.0
4.0
4.0
9.0 13.0 10.0
9.0 13.0 10.0
9.0 13.0 10.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
R46 KF 2100 - - N0
R46 KF 2150 - - N0
R46 KF 2220 - - N0
R46 KF 2330 - - M1
R46 KF 2470 - - N0
R46 KF 2680 - - M1
R46 KF 3100 - - M1
-
File No.154612
Across-the-line
Across-the-line
(LR 83890)
-
-
UL 1414
(up to 1µF, 85°C;
250Vac)
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
9.0 12.5 18.0 15.0
7.5 13.5 18.0 15.0
9.0 12.5 18.0 15.0
6.0 17.5 18.0 15.0
8.5 14.5 18.0 15.0
-
File No.E97797
File No.E85238
-
-
M
-
Electromagnetic
Interference
Filters
UL 1283
(310 Vac)
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
2100 - - 01
2150 - - 01
2220 - - 01
2330 - - 01
2470 - - 01
2680 - - 01
3100 - - M1
3150 - - M2
3150 - - L2
3220 - - M2
3220 - - L2
3220 - - 02
3330 - - N0
3330 - - M1
3330 - - N1
3330 - - 02
3330 - - 01
3470 - - 02
3470 - - N0
3470 - - M1
3560 - - N0
3600 - - N0
-
-
File CQC3001008199
CQC3001008842
GB/T 14472
Class X2
-
-
-
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
-
-
.
-
-
(**) ENEC mark has replaced all the following European
National marks:
-
-
-
0.33 µF 10.0 16.0 18.0 15.0
-
0.33 µF
0.33 µF
9.0 12.5 18.0 15.0
7.5 18.5 18.0 15.0
M
-
Table 1
0.33 µF 13.0 12.0 18.0 15.0
0.47 µF 7.5 18.5 18.0 15.0
-
Standard
packaging style
Lead
length
Taping style
Ordering
code
M
M
-
0.47 µF 10.0 16.0 18.0 15.0
0.47 µF 11.0 19.0 18.0 15.0
0.56 µF 11.0 19.0 18.0 15.0
0.60 µF 11.0 19.0 18.0 15.0
(Digit 10 to
11)
P2
Fig.
Pitch
(mm)
(mm)
(mm)
(No.)
-
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
-
0.15 µF
0.22 µF
0.33 µF
0.47 µF
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
R46 KN 3150 - - 01
R46 KN 3220 - - M1
R46 KN 3330 - - N0
R46 KN 3470 - - N0
R46 KN 3680 - - M2
R46 KN 4100 - - N2
R46 KN 4100 - - N1
R46 KR 3470 - - 01
R46 KR 3680 - - M1
R46 KR 4100 - - M1
R46 KR 4150 - - M1
R46 KR 4220 - - M2
R46 KR 4220 - - M1
R46 KR 4330 - - M2
R46 KR 4470 - - M2
R46 KR 4470 - - M1
R46 KW 4150 - - M1
R46 KW 4220 - - M2
R46 KW 4220 - - M1
R46 KW 4330 - - M1
R46 KW 4470 - - M2
R46 KW 4470 - - M1
R46 KW 4680 - - M2
R46 KW 4680 - - M1
R46 KW 5100 - - M1
-
-
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
REEL Ø500mm
REEL Ø500mm
-
-
+2
Loose, short leads
Loose, long leads
Loose, long leads
04
25
00
50
40
0.68 µF 10.0 18.5 26.5 22.5
1.0 µF 10.0 18.5 26.5 22.5
1.0 µF 11.0 20.0 26.5 22.5
-
-1/+2
M
-
30+5
30+5
Loose, insulated
rigid leads
0.47 µF
0.68 µF
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
-
51
52
-
Loose, insulated
flexible leads
150±5
1.0 µF 11.0 20.0 32.0 27.5
1.5 µF 13.0 22.0 32.0 27.5
2.2 µF 13.0 25.0 32.0 27.5
2.2 µF 14.0 28.0 32.0 27.5
3.3 µF 18.0 33.0 32.0 27.5
4.7 µF 18.0 33.0 32.0 27.5
4.7 µF 22.0 37.0 32.0 27.5
1.5 µF 11.0 22.0 41.5 37.5
2.2 µF 11.0 22.0 41.5 37.5
2.2 µF 13.0 24.0 41.5 37.5
3.3 µF 16.0 28.5 41.5 37.5
4.7 µF 16.0 28.5 41.5 37.5
4.7 µF 19.0 32.0 41.5 37.5
6.8 µF 20.0 40.0 41.5 37.5
6.8 µF 24.0 44.0 41.5 37.5
10.0 µF 30.0 45.0 41.5 37.5
-
-
Note: Ammo-pack is the preferred packaging for taped version.
-
-
-
-
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 184 and contact
our Technical Service for choosing the safest solution.
-
-
M
-
-
M
-
-
-
-
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
All dimensions are in mm
E12 Series available upon request
191
10/2006
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
APPROVALS
Rated Cap.
275 Vac / 560 Vdc
Ø d
Max
Part Number
ENEC
IEC 60384-14
Std dimensions
dv/dt at
390Vdc
Class X2
File No.V4413
File No.154612
(**)
B
H
L
p
(V/ µs)
CSA
E 384-14
(up to 5.6µF)
0.033 µF
0.047 µF
0.068 µF
0.1 µF
4.0
4.0
9.0 13.0 10.0
9.0 13.0 10.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
500
500
500
500
500
500
400
400
400
400
400
400
400
40
400
400
400
400
R46 KF 2330 - - P0
R46 KF 2470 - - P0
R46 KF 2680 - - P0
R46 KF 3100 - - P1
R46 KF 3100 - - P0
R46 KF 3150 - - P0
-
(LR 83890)
in progress
Across-the-line
Across-the-line
-
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
9.0 12.5 18.0 15.0
6.0 17.5 18.0 15.0
8.5 14.5 18.0 15.0
9.0 12.5 18.0 15.0
6.0 17.5 18.0 15.0
7.5 18.5 18.0 15.0
-
UL 1414
(up to 1µF, 85°C;
250Vac)
M
-
File No.E97797
in progress
0.1 µF
0.15 µF
0.15 µF
0.22 µF
0.33 µF
0.33 µF
0.33 µF
0.47 µF
0.47 µF
0.47 µF
0.47 µF
M
-
Electromagnetic
Interference
Filters
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
3150 - - P0
3220 - - P0
3330 - - P0
3330 - - P1
3330 - - P2
3470 - - P0
3470 - - P1
3470 - - P2
3470 - - P3
3680 - - P1
3680 - - P0
3820 - - P0
UL 1283
(310 Vac)
File No.E85238
-
-
File CQC3001008199
CQC3001008842
in progress
GB/T 14472
Class X2
-
M
M
-
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
0.68 µF 10.0 16.0 18.0 15.0
0.68 µF 11.0 19.0 18.0 15.0
0.82 µF 11.0 19.0 18.0 150
M
-
.
M
-
(**) ENEC mark has replaced all the following European
National marks:
0.47 µF
0.56 µF
0.56 µF
0.68 µF
1.0 µF
6.0 15.0 26.5 22.5
6.0 15.0 26.5 2
7.0 16.0 26.5 22.5
7.0 16.0 265 225
8.5 17.0 26.5 22.5
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
R46 KN 3470 - - P1
R46 KN 3560 - - P1
R46 KN 3560 - - P0
R46 KN 3680 - - P0
R46 KN 4100 - - P1
R46 KN 4100 - - P0
R46 KN 4150 - - P1
R46 KN 4150 - - P0
R46 KN 4220 - - P0
R46 KR 4100 - - P0
R46 KR 4150 - - P0
R46 KR 4220 - - P0
R46 KR 4330 - - P0
R46 KR 4470 - - P1
R46 KR 4470 - - P0
M
-
-
M
-
1.0 µF 10.0 18.5 26.5 2
1.5 µF 10.0 18.5 26.5 22.5
1.5 µF 11.0 20.0 26.5 .5
2.2 µF 13.0 22.0 26.5 22.5
M
-
Table 1
M
-
Standard
packaging style
Lead
length
Taping style
Ordering
code
1.0 µF
9.0 32.0 27.5
(Digit 10 to 11)
1.5 µF 11.0 20.0 32.0 27.5
2.2 µF 13.0 22.0 32.0 27.5
3.3 µF 14.0 28.0 32.0 27.5
4.7 µF 140 28.0 32.0 27.5
-
P2
Fig.
Pitch
(mm)
(mm)
(mm)
(No.)
-
-
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
M
-
4.7 µF 18.0 33.0 32.0 27.5
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
REEL Ø500mm
REEL Ø500mm
6.8 µF 22.0 37.0 32.0 27.5
2.2 µF 11.0 22.0 41.5 37.5
3.3 µF 13.0 24.0 41.5 37.5
4.7 µF 16.0 28.5 41.5 37.5
6.8 µF 19.0 32.0 41.5 37.5
10.0 µF 20.0 40.0 41.5 37.5
0.8
1.0
1.0
1.0
1.0
1.0
150
100
100
100
100
100
R46 KR 4680 - - P0
R46 KW 4220 - - P0
R46 KW 4330 - - P0
R46 KW 4470 - - P0
R46 KW 4680 - - P0
R46 KW 5100 - - P0
-
-
+2
-
Loose, short leads
Loose, long leads
Loose, long leads
04
25
00
50
40
-1/+2
-
30+5
30+5
-
-
Loose, insulated
rigid leads
51
52
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
Loose, insulated
flexible leads
150±5
Note: Ammo-pack is the preferred packaging for taped version.
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 184 and contact
our Technical Service for choosing the safest solution.
All dimensions are in mm
E12 Series available upon request
192
10/2006
R.46
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
APPROVALS
Rated Cap.
300 Vac / 630 Vdc
Ø d
Max
Part Number
Std dimensions
dv/dt at
390Vdc
ENEC
IEC 60384-14
Class X2
File No.V4413
File No.154612
(**)
B
H
L
p
(V/ µs)
CSA
E 384-14-95
(up to 5.6µF)
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.1 µF
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
6.0 12.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
9.0 12.5 18.0 15.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
500
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
150
150
100
100
100
100
100
100
100
100
100
R46 3F 2100 - - M1
R46 3F 2150 - - M1
R46 3F 2220 - - M1
R46 3F 2330 - - M1
R46 3F 2470 - - M1
R46 3F 2680 - - M1
R46 3F 3100 - - M1
-
Across-the-line
(LR 83890)
-
-
UL 1414
up to 1µF, 85°C;
250Vac)
-
Across-the-line
File No.E97797
File No.E85238
-
-
M
-
Electromagnetic
Interference
Filters
UL 1283
(310 Vac)
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.10 µF
0.10 µF
0.15 µF
0.15 µF
0.22 µF
0.22 µF
0.22 µF
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
R46 3I
2100 - - 01
2150 - - 01
2220 - - 01
2330 - - 01
2470 - - 01
2680 - - 01
3100 - - M1
3100 - - 01
3150 - - M2
3150 - - M1
3220 - - M2
3220 - - M1
3220 - - L2
3330 - - M1
3330 - - 01
3470 - - M1
-
-
File CQC3001008199
CQC3001008842
-
GB/T 14472
Class X2
-
-
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
M
-
M
-
(**) ENEC mark has replaced all the following European
National marks:
M
-
-
0.33µF 10.0 16.0 18.0 15.0
0.33 µF 13.0 12.0 18.0 15.0
0.47 µF 11.0 19.0 18.0 15.0
-
-
-
Table 1
0.15 µF
0.22 µF
0.33 µF
0.47 µF
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
8.5 17.0 26.5 22.5
R46 3N 3150 - - 01
R46 3N 3220 - - M1
R46 3N 3330 - - M1
R46 3N 3470 - - M1
R46 3N 3680 - - M2
R46 3N 4100 - - M1
R46 3R 3470 - - 01
R46 3R 3680 - - M1
R46 3R 4100 - - M1
R46 3R 4150 - - M1
R46 3R 4220 - - M2
R46 3R 4220 - - M1
R46 3R 4220 - - 01
R46 3R 4330 - - M2
R46 3R 4330 - - M1
R46 3R 4470 - - M2
R46 3R 4470 - - M1
R46 3W 4150 - - M1
R46 3W 4220 - - M2
R46 3W 4220 - - M1
R46 3W 4330 - - M1
R46 3W 4470 - - M2
R46 3W 4470 - - M1
R46 3W 4680 - - M2
R46 3W 4680 - - M1
R46 3W 5100 - - M1
-
-
Standard
packaging style
Lead
length
Taping style
Ordering
code
-
(Digit 10 to 11)
-
P2
(mm)
Fig.
(No.)
Pitch
(mm)
(mm)
0.68 µF 10.0 18.5 26.5 22.5
1.0 µF 13.0 22.0 26.5 22.5
-
-
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
0.47 µF
0.68 µF
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
-
-
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
REEL Ø500mm
REEL Ø500mm
1.0 µF 11.0 20.0 32.0 27.5
1.5 µF 13.0 22.0 32.0 27.5
2.2 µF 13.0 25.0 32.0 27.5
2.2 µF 14.0 28.0 32.0 27.5
2.2 µF 18.0 33.0 32.0 27.5
3.3 µF 18.0 33.0 32.0 27.5
3.3 µF 22.0 37.0 32.0 27.5
4.7 µF 18.0 33.0 32.0 27.5
4.7 µF 22.0 37.0 32.0 27.5
1.5 µF 11.0 22.0 41.5 37.5
2.2 µF 11.0 22.0 41.5 37.5
2.2 µF 13.0 24.0 41.5 37.5
3.3 µF 16.0 28.5 41.5 37.5
4.7 µF 16.0 28.5 41.5 37.5
4.7 µF 19.0 32.0 41.5 37.5
6.8 µF 20.0 40.0 41.5 37.5
6.8 µF 24.0 44.0 41.5 37.5
10.0 µF 30.0 45.0 41.5 37.5
-
-
+2
Loose, short leads
Loose, long leads
Loose, long leads
04
25
00
50
40
-
-1/+2
-
30+5
30+5
-
-
Loose, insulated
rigid leads
51
52
-
Loose, insulated
flexible leads
-
150±5
-
-
Note: Ammo-pack is the preferred packaging for taped version.
M
-
-
M
-
-
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 184 and contact
our Technical Service for choosing the safest solution.
-
-
Rated voltage (3=300Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
All dimensions are in mm
E12 Series available upon request
193
10/2006
R.46
Loose
Taped
X2 CLASS (IEC 60384-14) - MKP
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Fig.1
Fig.2
Typical applications: interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor would not lead to danger of electric
shock.
PRODUCT CODE: R46
NEW 125°C
p ≤15
0.6 or 0.8*
p = 22.5
0.8
Ø d ±0.05
*See size table.
All dimensions are in mm.
Max
275 Vac / 560 Vdc
dv/dt at
390Vdc
(V/ µs)
Rated
Cap.
Std dimensions
Ø d
Part Number
GENERAL TECHNICAL DATA
B
H
L
p
Dielectric: polypropylene film.
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.10 µF
0.15 µF
0.15 µF
0.15 µF
0.22 µF
0.22 µF
0.22 µF
0.22 µF
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
6.0 17.5 18.0 15.0
9.0 12.5 18.0 15.0
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
6.0 17.5 18.0 15.0
9.0 12.5 18.0 15.0
7.5 18.5 18.0 15.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
R46 K F 2100 - - H1
R46 K F 2150 - - H1
R46 K F 2220 - - H1
R46 K F 2330 - - H1
R46 K F 2470 - - H1
R46 K F 2680 - - H1
R46 K I 2100 - - H1
R46 K I 2150 - - H1
R46 K I 2220 - - H1
R46 K I 2330 - - H1
R46 K I 2470 - - H1
R46 K I 2680 - - H1
R46 K I 3100 - - H1
R46 K I 3150 - - H2
R46 K I 3150 - - H3
R46 K I 3150 - - H1
R46 K I 3220 - - H1
R46 K I 3220 - - H2
R46 K I 3220 - - H3
R46 K I 3220 - - H4
R46 K I 3330 - - H1
R46 K I 3330 - - H2
R46 K I 3330 - - H3
R46 K I 3470 - - H1
R46 K N 3150 - - H1
R46 K N 3220 - - H1
R46 K N 3330 - - H1
R46 K N 3470 - - H1
R46 K N 3680 - - H1
R46 K N 4100 - - H1
-
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled. Box material is
solvent resistant and flame retardant according to UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
-
-
-
-
M
-
-
Climatic category: 40/125/56 IEC 60068-1
Operating temperature range: -40 to +125°C
-
Related documents:
IEC 60384-14; EN 60384-14
-
-
ELECTRICAL CHARACTERISTICS
-
Rated voltage (VR):
Capacitance range:
275 Vac (50/60Hz) / 560 Vdc
0.01µF to 1µF
-
-
-
TEST METHOD AND PERFORMANCE
-
Endurance:
-
Test conditions
M
M
-
Temperature:
Test duration:
+125°C±2°C
1000 h
Voltage applied:
1.25 x VR +1000Vac 0.1 s/h
Performance
0.33 µF 10.0 16.0 18.0 15.0
0.33 µF 7.5 18.5 18.0 15.0
M
M
M
M
-
Dielectric strength:
no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤ 10%
Insulation resistance: ≥ 50% of initial limit.
0.33 µF 13.0 12.0 18.0 15.0
0.47 µF 11.0 19.0 18.0 15.0
0.15 µF
0.22 µF
0.33 µF
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
APPROVALS
-
-
ENEC
IEC 60384-14
Class X2
File No.CA08.00063
0.47 µF 10.0 18.5 26.5 22.5
0.68 µF 11.0 20.0 26.5 22.5
1.0 µF 13.0 22.0 26.5 22.5
-
(**)
-
CSA
E 384-14-95
File No.154612
(LR83890)
Across-the-line
Across-the-line
-
UL 1414
up to 1µF, 85°C;
250Vac)
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
File No.E97797
File No.E85238
Electromagnetic
Interference
Filters
UL 1283
(310 Vac)
E12 Series available upon request
All dimensions are in mm
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
(**) ENEC mark has replaced all the following European National
marks:
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 184 and contact
our Technical Service for choosing the safest solution.
194
10/2006
R.46S
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Loose
Taped
Fig.1 Fig.2
Typical applications: This special R46 release is specifically
designed for applications with particular protection against
severe ambient conditions.
PRODUCT CODE: R46
Pitch Box thickness (B)
Maximum dimensions (mm)
(mm)
(mm)
B max
H max
L max
10.0
15.0
15.0
22.5
27.5
37.5
All
<7.5
≥7.5
All
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
p ≤15
22.5 ≤ p ≤ 27.5
p = 37.5
1.0
Ø d ±0.05
*See size table.
0.6 or 0.8*
0.8
All
All dimensions are in mm.
All
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
GENERAL TECHNICAL DATA
Dielectric: polypropylene film.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Test conditions 1st
Temperature:
Relative humidity (RH):
Test duration:
+40°C ± 2°C
93% ±2%
56 days
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
+60°C ± 2°C
95% ±2%
500 hours
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Test conditions 3rd
Climatic category: 40/110/56 IEC 60068-1
Temperature:
Relative humidity (RH):
Test duration:
+40°C ± 2°C
93% ±2%
500 hours
Operating temperature range: -40 to +110°C
Related documents:
IEC 60384-14, EN 60384-14.
Voltage value:
230 Vac, 50 Hz
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
275Vac (50/60Hz) / 560 Vdc
Performance
Dielectric strength:
no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance range:
0.022µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance change |∆C/C|:≤5%
Insulation resistance: ≥50% of initial limit.
Endurance:
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
tolerance ±5% (J) available upon request
Test conditions
Temperature:
Test duration:
Voltage applied:
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C: ≤15 (8)* at 1kHz
* Typical value
Performance
Insulation resistance:
Test conditions
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|:≤10%
Temperature:
Voltage charge time:
Voltage charge:
+25°C±5°C
1 min
100 Vdc
Insulation resistance:
≥50% of initial limit.
Resistance to soldering heat:
Performance
≥1x105 MΩ (5x105 MΩ )*
≥30000 s (150000 s)*
* Typical value
for C≤0.33µF
for C>0.33µF
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Test voltage between terminations (on all pieces):
Performance
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
Capacitance change |∆C/C|:≤2%
195
10/2006
R.46S
X2 CLASS (IEC60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
APPROVALS
Rated Cap.
(*)
275 Vac / 560 Vdc
Std dimensions
Ø d
Max
dv/dt at
390Vdc
Part Number
ENEC
IEC 60384-14
Class X2
File No.V4413
File No.154612
(**)
B
H
L
p
(V/ µs)
CSA
E 384-14-95
(up to 5.6 µF)
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.068 µF
0.10 µF
0.10 µF
0.15 µF
0.15 µF
0.22 µF
0.22 µF
0.22 µF
0.22 µF
4.0
9.0 13.0 10.0
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
100
100
100
100
100
100
100
100
R46 KF 2220 - - S0
R46 KF 2330 - - S0
R46 KF 2470 - - S0
R46 KF 2680 - - S0
-
Across-the-line
Across-the-line
(LR 83890)
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
6.0 17.5 18.0 15.0
9.0 12.5 18.0 15.0
-
-
UL 1414
up to 1µF, 85°C;
250Vac)
-
File No.E97797
File No.E85238
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
R46 KI
2680 - - S0
3100 - - S1
3100 - - S0
3150 - - S1
3150 - - S0
3220 - - S1
3220 - - S0
3220 - - S2
3220 - - S3
3330 - - S1
3330 - - S0
3330 - - S2
3470 - - S0
-
M
-
Electromagnetic
Interference
Filters
UL 1283
(310 Vac)
M
-
File CQC3001008199
CQC3001008842
M
-
GB/T 14472
Class X2
-
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065
-
0.33 µF 13.0 12.0 18.0 15.0
0.33 µF 10.0 16.0 18.0 15.0
-
-
0.33 µF
7.5 18.5 18.0 15.0
-
0.47 µF 11.0 19.0 18.0 15.0
-
0.22 µF
0.33 µF
0.33 µF
0.47 µF
0.47 µF
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
7.0 16.0 26.5 22.5
8.5 17.0 26.5 22.5
R46 KN 3220 - - S0
R46 KN 3330 - - S1
R46 KN 3330 - - S0
R46 KN 3470 - - S1
R46 KN 3470 - - S0
R46 KN 3680 - - S0
R46 KN 4100 - - S1
R46 KN 4100 - - S0
R46 KN 4120 - - S0
R46 KR 3470 - - S0
R46 KR 3680 - - S1
R46 KR 4100 - - S1
R46 KR 4150 - - S1
R46 KR 4220 - - S2
R46 KR 4330 - - S2
R46 KR 4470 - - S2
R46 KW 4150 - - S1
R46 KW 4220 - - S2
R46 KW 4220 - - S1
R46 KW 4330 - - S1
R46 KW 4470 - - S2
R46 KW 4470 - - S1
R46 KW 4680 - - S2
R46 KW 5100 - - S1
-
M
-
(**) ENEC mark has replaced all the following European
National marks:
M
-
0.68 µF 10.0 18.5 26.5 22.5
1.0 µF 10.0 18.5 26.5 22.5
1.0 µF 13.0 22.0 26.5 22.5
1.2 µF 13.0 22.0 26.5 22.5
-
M
-
-
0.47 µF
0.68 µF
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
-
-
1.0 µF 11.0 20.0 32.0 27.5
1.5 µF 13.0 22.0 32.0 27.5
2.2 µF 13.0 25.0 32.0 27.5
3.3 µF 18.0 33.0 32.0 27.5
4.7 µF 18.0 33.0 32.0 27.5
1.5 µF 11.0 22.0 41.5 37.5
2.2 µF 11.0 22.0 41.5 37.5
2.2 µF 13.0 24.0 41.5 37.5
3.3 µF 16.0 28.5 41.5 37.5
4.7 µF 16.0 28.5 41.5 37.5
4.7 µF 19.0 32.0 41.5 37.5
6.8 µF 20.0 40.0 41.5 37.5
10.0 µF 30.0 45.0 41.5 37.5
-
Table 1
-
Standard
packaging style
Lead
length
Taping style
Ordering
code
-
-
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
-
(mm)
-
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
M
-
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
REEL Ø500mm
REEL Ø500mm
-
M
-
+2
Loose, short leads
Loose, long leads
Loose, long leads
04
25
00
50
40
-1/+2
-
30+5
30+5
-
Loose, insulated
rigid leads
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
51
52
Loose, insulated
flexible leads
150±5
Note: Ammo-pack is the preferred packaging for taped version.
E12 Series available upon request
All dimensions are in mm
196
10/2006
R.46+R
Capacitors with discharge resistor
Loose
Taped
Fig.1 Fig.2
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
2
Insulated rigid leads
Insulated flexible leads 0.5mm
PRODUCT CODE: R46
Pitch Box thickness (B)
Maximum dimensions (mm)
(mm)
(mm)
B max
H max
L max
P= 22.5 to 27.5
0.8
p = 37.5
1
22.5
27.5
37.5
All
All
All
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
L +0.3
L +0.3
L +0.3
Ø d ±0.05
All dimensions are in mm.
GENERAL TECHNICAL DATA
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Dielectric: polypropylene film.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Test conditions 1st
Temperature:
Relative humidity (RH):
Test duration:
+40°C ± 2°C
93% ±2%
56 days
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Performance
Dielectric strength:
no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Capacitance change |∆C/C|:≤5%
Insulation resistance: ≥50% of initial limit.
Climatic category: 40/110/56 IEC 60068-1
Endurance:
Operating temperature range: -40 to +110°C
Test conditions
Related documents:
IEC 60384-14, EN 60384-14.
Temperature:
Test duration:
Voltage applied:
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
275Vac (50/60Hz) / 560 Vdc
Performance
300Vac (50/60Hz) / 630 Vdc
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|:≤10%
Capacitance range:
0.22µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Insulation resistance:
≥50% of initial limit.
Capacitance tolerances (measured at 1 kHz):
Resistance to soldering heat:
±10% (K); ±20% (M).
Test conditions
Dissipation factor (DF):
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
tgδ 10-4 at +25°C ±5°C:
≤10 (6)* at 1kHz
* Typical value
Performance
Insulation resistance:
Capacitance change |∆C/C|:≤2%
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
+25°C±5°C
1 min
100 Vdc
APPROVALS
ENEC
IEC 60384-14
Class X2
File No.V4413
Performance
UL 1414
up to 1µF, 85°C;
250Vac)
≥1x105 MΩ (5x105 MΩ )*
≥30000 s (150000 s)*
* Typical value
for C≤0.33µF
for C>0.33µF
Across-the-line File No.E97797
Electromagnetic
UL 1283
Interference
Filters
File No.E85238
Test voltage between terminations (on all pieces):
(250 Vac-105°C)
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
Approved according to IEC 60384-14 (ex-former EN 132400)
According to IEC 60065.
197
10/2006
R.46+R
Capacitors with discharge resistor
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
PRODUCT CODE: R46
Table 1
Rated
Cap. (*)
275 Vac / 560 Vdc
Max
Part Number
Std dimensions
dv/dt at
390Vdc
(V/ µs)
Ø d
Standard
packaging style
Lead
length
Taping style
Ordering
code
B
H
L
p
(Digit 10 to 11)
P2
Fig.
Pitch
(mm)
0.22 µF 7.0 16.0 26.5 22.5 0.8
0.33 µF 8.5 17.0 26.5 22.5 0.8
0.47 µF 10.0 18.5 26.5 22.5 0.8
0.68 µF 11.0 20.0 26.5 22.5 0.8
0.47 µF 11.0 20.0 32.0 27.5 0.8
0.68 µF 11.0 20.0 32.0 27.5 0.8
1.0 µF 13.0 22.0 32.0 27.5 0.8
1.5 µF 13.0 22.0 32.0 27.5 0.8
2.2 µF 14.0 28.0 32.0 27.5 0.8
3.3 µF 18.0 33.0 32.0 27.5 0.8
4.7 µF 22.0 37.0 32.0 27.5 0.8
1.5 µF 11.0 22.0 41.5 37.5 1.0
2.2 µF 13.0 24.0 41.5 37.5 1.0
3.3 µF 16.0 28.5 41.5 37.5 1.0
4.7 µF 19.0 32.0 41.5 37.5 1.0
6.8 µF 20.0 40.0 41.5 37.5 1.0
10.0 µF 24.0 44.0 41.5 37.5 1.0
200 R46KN 3220 - - 01 - -
200 R46KN 3330 - - 01 - -
200 R46KN 3470 - - 01 - -
200 R46KN 3680 - - 01 - -
150 R46KR 3470 - - 01 - -
150 R46KR 3680 - - M1 - -
150 R46KR 4100 - - M1 - -
150 R46KR 4150 - - M1 - -
150 R46KR 4220 - - M1 - -
150 R46KR 4330 - - M2 - -
150 R46KR 4470 - - M1 - -
100 R46KW 4150 - - M1 - -
100 R46KW 4220 - - M1 - -
100 R46KW 4330 - - M1 - -
100 R46KW 4470 - - M1 - -
100 R46KW 4680 - - M2 - -
100 R46KW 5100 - - M1 - -
(mm)
(No.)
(mm)
19.05
2
22.5/27.5
CK
REEL Ø500mm
+2
Loose, short leads
Loose, long leads
Loose, long leads
04
25
00
50
40
-1/+2
30+5
30+5
Loose, insulated
rigid leads
51
52
Loose, insulated
flexible leads
150±5
PRODUCT CODE SYSTEM
The part number, comprising 15 digits, is formed as follows:
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
-
-
R 4 6
Digit 1 to 3
Digit 4
Series code.
a.c. rated voltage:
K = 275Vac; 3 = 300Vac
Pitch:
Digit 5
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
N = 22.5;
R = 27.5;
W = 37.5 mm
Digit 6 to 9
Digits 7 - 8 - 9 indicate the first three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Value of discharge resistor (Table 2)
Rated
Cap. (*)
300 Vac / 630 Vdc
Std dimensions
Max
Part Number
dv/dt at
390Vdc
(V/ µs)
Ø d
B
H
L
p
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12
Identifies the dimensions and electrical
characteristics.
0.22 µF 7.0 16.0 26.5 22.5 0.8
0.33 µF 8.5 17.0 26.5 22.5 0.8
0.47 µF 10.0 18.5 26.5 22.5 0.8
0.68 µF 11.0 20.0 26.5 22.5 0.8
0.47 µF 11.0 20.0 32.0 27.5 0.8
0.68 µF 11.0 20.0 32.0 27.5 0.8
1.0 µF 13.0 22.0 32.0 27.5 0.8
1.5 µF 13.0 22.0 32.0 27.5 0.8
2.2 µF 14.0 28.0 32.0 27.5 0.8
3.3 µF 18.0 33.0 32.0 27.5 0.8
4.7 µF 22.0 37.0 32.0 27.5 0.8
1.5 µF 11.0 22.0 41.5 37.5 1.0
2.2 µF 13.0 24.0 41.5 37.5 1.0
3.3 µF 16.0 28.5 41.5 37.5 1.0
4.7 µF 19.0 32.0 41.5 37.5 1.0
6.8 µF 20.0 40.0 41.5 37.5 1.0
10.0 µF 24.0 44.0 41.5 37.5 1.0
200 R463N 3220 - - 01 - -
200 R463N 3330 - - 01 - -
200 R463N 3470 - - 01 - -
200 R463N 3680 - - 01 - -
150 R463R 3470 - - 01 - -
150 R463R 3680 - - M1 - -
150 R463R 4100 - - M1 - -
150 R463R 4150 - - M1 - -
150 R463R 4220 - - M1 - -
150 R463R 4330 - - M2 - -
150 R463R 4470 - - M1 - -
100 R463W 4150 - - M1 - -
100 R463W 4220 - - M1 - -
100 R463W 4330 - - M1 - -
100 R463W 4470 - - M1 - -
100 R463W 4680 - - M2 - -
100 R463W 5100 - - M1 - -
Digit 13
Digit 14
Internal use
Capacitance tolerance:
K=±10%; M=±20%
Value of the discharge resistor (tolerance±10%)
according to the following table*:
Digit 15
Table 2
R
code (-)
470 kΩ
680 kΩ
1 MΩ
E
F
G
L
1.2 MΩ
1.5 MΩ
2.2 MΩ
3.3 MΩ
4.7 MΩ
6.8 MΩ
10 MΩ
N
P
Q
S
T
*Other resistors are avaible upon
request.
V
Rated voltage (3=300Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
All dimensions are in mm
Value of discharge resistor (Table 2)
198
10/2006
R.47
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Loose
Taped
Fig.1
Fig.2
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRODUCT CODE: R47
Pitch Box thickness (B)
Maximum dimensions (mm)
(mm)
(mm)
B max
H max
L max
10.0
15.0
15.0
22.5
27.5
37.5
All
<7.5
≥7.5
All
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
p ≤15
0.6 or 0.8*
22.5 ≤ p ≤ 27.5
p = 37.5
1.0
Ø d ±0.05
All
0.8
All
*See size table.
All dimensions are in mm.
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
GENERAL TECHNICAL DATA
Dielectric: polypropylene film - 2 sections.
Test conditions 1st
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Temperature:
+40°C ± 2°C
93% ±2%
56 days
Relative humidity (RH):
Test duration:
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
+60°C ± 2°C
95% ±2%
500 hours
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Performance
Climatic category: 40/110/56 IEC 60068-1
Dielectric strength:
no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|:≤5%
Insulation resistance: ≥50% of initial limit.
Operating temperature range: -40 to +110°C
Related documents:
IEC 60384-14; EN 60384-14.
ELECTRICAL CHARACTERISTICS
Endurance:
Rated voltage (VR):
Capacitance range:
440Vac / 1000Vdc; 50/60Hz
4700pF to 2.2µF
Test conditions
Temperature:
Test duration:
Voltage applied:
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Performance
Tolerance ±5% (J) available
upon request.
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|:≤10%
Dissipation factor (DF):
tgδ x 10-4 at +25°C ±5°C:≤10 (6)* at 1kHz
* Typical value
Insulation resistance:
≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Insulation resistance:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Temperature:
Voltage charge time:
Voltage charge:
Performance
≥1x105 MΩ
≥30000 s
+25°C±5°C
1 min
100 Vdc
Performance
Capacitance change |∆C/C|:≤2%
for C≤0.33µF
for C>0.33µF
Winding scheme
Test voltage between terminations (on all pieces):
single sided metallized
polypropylene film
1700Vac for 1 s + 2700Vdc for 1 s at +25°C±5°C
2 sections
199
10/2006
相关型号:
R46.KR.4150.JP.01.K
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 1.5uF, Through Hole Mount
KEMET
R46.KR.4150.JP.M1.K
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 1.5uF, Through Hole Mount
KEMET
R46.KR.4470.51.M1.M
Film Capacitor, Polypropylene, 560V, 20% +Tol, 20% -Tol, 4.7uF, Through Hole Mount, RADIAL LEADED
KEMET
R46.KR.4470.55.M1.K
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 4.7uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
KEMET
R46.KW.4220.52.M1.K
Film Capacitor, Polypropylene, 560V, 10% +Tol, 10% -Tol, 2.2uF, Through Hole Mount, RADIAL LEADED
KEMET
R46.KW.4470.45.M1.K
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 4.7uF, Through Hole Mount
KEMET
R46.MI.2100.45.01.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount
KEMET
R46.MI.2100.51.01.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount
KEMET
R46.MI.2100.55.01.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount
KEMET
R46.MI.2100.JP.01.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount
KEMET
R46.MI.2150.51.01.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.015uF, Through Hole Mount
KEMET
R46.MI.2220.51.01.M
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.022uF, Through Hole Mount
KEMET
©2020 ICPDF网 联系我们和版权申明