R46KI368050P1M [KEMET]
Film Capacitor, Polypropylene, 560V, 20% +Tol, 20% -Tol, 0.68uF, Through Hole Mount, 7139, RADIAL LEADED;型号: | R46KI368050P1M |
厂家: | KEMET CORPORATION |
描述: | Film Capacitor, Polypropylene, 560V, 20% +Tol, 20% -Tol, 0.68uF, Through Hole Mount, 7139, RADIAL LEADED 电容器 |
文件: | 总16页 (文件大小:1478K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Overview
Applications
The R46 Series is constructed of metallized polypropylene
filmꢀencapsulatedꢀwithꢀself-extinguishingꢀresinꢀinꢀaꢀboxꢀofꢀ
material that meets the requirements of UL 94 V–0.
For worldwide use in electromagnetic interference (EMI)
suppression in across-the-line applications that require X2
safetyꢀclassification.ꢀIntendedꢀforꢀuseꢀinꢀsituationsꢀinꢀwhichꢀ
capacitorꢀfailureꢀwouldꢀnotꢀresultꢀinꢀexposureꢀtoꢀelectricꢀ
shock. Not for use in "series with mains" type applications.
Benefits
• Approvals: ENEC, UL, cUL, CQC
• X2 CLASS (IEC 60384-14)
• Rated voltage: 275 VAC 50/60 Hz
• Capacitance range: 0.033 – 10 µF
• Lead spacing: 10.0 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category 40/110/56, IEC 60068–1
• Tape & Reel in accordance with IEC 60286–2
• RoHS compliant and lead-free terminations
•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ−40°Cꢀtoꢀ+110°C
• 100% screening factory test at 2,200 VDC/1,500 VAC
• Self healing properties
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
R46
K
I
3470
00
P0
M
Rated Voltage
(VAC)
Lead Spacing
(mm)
Capacitance
Code (pF)
Capacitance
Tolerance
Series
Packaging
Internal Use
X2, Metallized
Polypropylene
K = 275
F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
The last three
digits represent
significantꢀfigures.ꢀ
Theꢀfirstꢀdigitꢀ
specifiesꢀnumberꢀ
ofꢀzerosꢀtoꢀbeꢀ
added.
See Ordering
OptionsꢀTable
P0
P1
P2
P3
K = ±10%
M = ±20%
One world. One KEMET
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
1
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Ordering Options Table
Lead Spacing
Lead and
Packaging
Code
Lead Length
(mm)
Nominal
(mm)
Type of Leads and Packaging
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
Ammo Pack
4ꢀ+2/-0
00
H0 = 18.5 ±0.5
DQ
Other Lead and Packaging Options
Tape & Reel (Large Reel)
H0 = 18.5 ±0.5
2.7ꢀ+0.5/−0
3.5ꢀ+0.5/−0
4.0ꢀ+0.5/−0
3.2ꢀ+0.3/−0.2
18 ±1
CK
JA
JB
JE
JH
JM
40
50
51
52
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Short Leads
Bulk (Bag) – Long Leads
10
15
22.5
Bulk (Bag) – Long Leads
30ꢀ+5/−0
Bulk (Bag) – Long Leads
25ꢀ+2/−1
Bulk (Bag) – Insulated Rigid Leads
Bulkꢀ(Bag)ꢀ–ꢀInsulatedꢀFlexibleꢀLeads
30ꢀ+5/−0ꢀ(spꢀ8ꢀ±2)
150 ±5 (sp 8 ±2)
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
Tape & Reel (Large Reel)
4ꢀ+2/−0
00
H0= 18.5 ±0.5
CK
Other Lead and Packaging Options
Bulk (Tray) – Short Leads
2.7ꢀ+0.5/−0
3.5ꢀ+0.5/−0
4.0ꢀ+0.5/−0
3.2ꢀ+0.3/−0.2
18 ±1
JA
JB
JE
JH
JM
40
50
51
52
Bulk (Tray) – Short Leads
27.5
Bulk (Tray) – Short Leads
Bulk (Tray) – Short Leads
Bulk (Tray) – Long Leads
Bulk (Tray) – Long Leads
30ꢀ+5/−0
Bulk (Tray) – Long Leads
25ꢀ+2/−1
Bulk (Bag) – Insulated Rigid Leads
Bulkꢀ(Bag)ꢀ–ꢀInsulatedꢀFlexibleꢀLeads
30ꢀ+5/−0ꢀ(spꢀ8ꢀ±2)
150 ±5 (sp 8 ±2)
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
4ꢀ+2/−0
00
Other Lead and Packaging Options
Bulk (Tray) – Short Leads
Bulk (Tray) – Short Leads
Bulk (Tray) – Short Leads
Bulk (Tray) – Short Leads
Bulk (Tray) – Long Leads
2.7ꢀ+0.5/−0
3.5ꢀ+0.5/−0
4.0ꢀ+0.5/−0
3.2ꢀ+0.3/−0.2
18 ±1
JA
JB
JE
JH
JM
40
50
51
52
37.5
Bulk (Tray) – Long Leads
30ꢀ+5/−0
Bulk (Tray) – Long Leads
25ꢀ+2/−1
Bulk (Bag) – Insulated Rigid Leads
Bulkꢀ(Bag)ꢀ–ꢀInsulatedꢀFlexibleꢀLeads
30ꢀ+5/−0ꢀ(spꢀ8ꢀ±2)
150 ±5 (sp 8 ±2)
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
2
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Dimensions – Millimeters
Inꢁꢂlaꢃed ꢄleꢅiꢆle Leadꢁ ꢇꢈꢉ ꢊꢊꢋ
Lꢀꢀꢁe
Inꢁꢂlaꢃed Rigid Leadꢁ
FRꢃꢄꢅ VIEꢆ
ꢁ
SIꢇE VIEꢆ
ꢂ
FRꢃꢄꢅ VIEꢆ
ꢁ
SIꢇE VIEꢆ
ꢂ
FRꢃꢄꢅ VIEꢆ
ꢁ
SIꢇE VIEꢆ
ꢂ
ꢀ
ꢀ
ꢀ
d
ꢁꢁ
p
d
p
B
H
L
d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
±0.4
4.0
5.0
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.2
+0.3
+0.3
+0.3
+0.3
+0.3
9.0
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
+0.1
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
+0.2
+0.2
+0.2
+0.3
+0.3
+0.3
+0.5
+0.5
+0.5
+0.5
+0.5
+0.5
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
+0.3
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
±0.05
11.0
12.0
11.0
12.0
17.5
13.5
18.5
14.5
12.5
16.0
19.0
15.0
16.0
17.0
18.5
20.0
22.0
17.0
20.0
22.0
28.0
33.0
37.0
22.0
24.0
28.5
32.0
40.0
6.0
5.0
6.0
6.0
7.5
7.5
8.5
9.0
10.0
11.0
6.0
7.0
8.5
10.0
11.0
13.0
9.0
11.0
13.0
14.0
18.0
22.0
11.0
13.0
16.0
19.0
20.0
Note: See Ordering Options Table for lead length (LL/H0) options.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
3
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Performance Characteristics
Dielectric
Plates
Polypropyleneꢀfilm
Metalꢀlayerꢀdepositedꢀbyꢀevaporationꢀunderꢀvacuum
Winding
Non-inductive type
Leads
Tinned wire
Protection
Plasticꢀcase,ꢀthermosettingꢀresinꢀfilled.ꢀBoxꢀmaterialꢀisꢀsolventꢀresistantꢀandꢀflameꢀretardantꢀaccordingꢀtoꢀUL94.
Related Documents
Rated Voltage VR
Capacitance Range
Capacitance Values
Capacitance Tolerance
Temperature Range
Climatic Category
IEC 60384-14, EN 60384-14
275 VAC (50/60 Hz), 560 VDC
0.033 µF to 10 µF
E6ꢀseriesꢀ(IECꢀ60063)ꢀmeasuredꢀ@ꢀ1ꢀkHzꢀandꢀ+20ꢀ±1°C
±10%, ±20%
−40ºCꢀtoꢀ+110°C
40/110/56 IEC 60068-1
Storageꢀtime:ꢀ≤ꢀ24ꢀmonthsꢀfromꢀtheꢀdateꢀmarkedꢀonꢀtheꢀlabelꢀpackage
Averageꢀrelativeꢀhumidityꢀperꢀyearꢀ≤ꢀ70%ꢀ
RHꢀ≤ꢀ85%ꢀforꢀ30ꢀdaysꢀrandomlyꢀdistributedꢀthroughoutꢀtheꢀyear
Dewꢀisꢀabsent
Storage Conditions
Approvals
Temperature:ꢀ−40ꢀtoꢀ80°Cꢀ(seeꢀ"MaximumꢀHumidityꢀinꢀStorageꢀConditions"ꢀgraphꢀbelow)
ENEC, UL, cUL, CQC
Maꢈiꢁꢃꢁ Hꢃꢁidiꢂꢉ in ꢊꢂꢋrage ꢆꢋndiꢂiꢋnꢌ
100
90
80
70
60
50
40
30
20
10
0
30 Days
Annual Average
−40
−20
0
20
40
60
80
ꢀeꢁperaꢂꢃre ꢄꢅꢆꢇ
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
4
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Performance Characteristics cont'd
DissipationꢀFactorꢀ(tanδ)
≤ꢀ0.1%ꢀ(0.06%*)ꢀatꢀ1ꢀkHzꢀ,ꢀ+25°Cꢀ±5°Cꢀ(*ꢀtypicalꢀvalue)
The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC.
Theꢀvoltageꢀlevelꢀisꢀselectedꢀtoꢀmeetꢀtheꢀrequirementsꢀinꢀapplicableꢀequipmentꢀstandards.ꢀ
Allꢀelectricalꢀcharacteristicsꢀareꢀcheckedꢀafterꢀtheꢀtest.ꢀThisꢀtestꢀcannotꢀbeꢀrepeated,ꢀasꢀthereꢀisꢀaꢀriskꢀof
damagingꢀtheꢀcapacitor.ꢀKEMETꢀisꢀnotꢀliableꢀinꢀsuchꢀcasesꢀforꢀanyꢀfailures.
Test Voltage Between Terminals
Measuredꢀatꢀ+25°Cꢀ±5°C,ꢀaccordingꢀtoꢀIECꢀ60384–2
Minimum Values Between Terminals
Insulation Resistance
In DC Applications
Voltage Charge
100 VDC
Voltage Charge Time
1 minute
Cꢀ≤ꢀ0.33ꢀμF
Cꢀ>ꢀ0.33ꢀμF
≥ꢀ1ꢀ•ꢀ105ꢀMΩ
≥ꢀ30,000ꢀMΩꢀ•ꢀµF
(ꢀ≥ꢀ150,000ꢀMΩꢀ•ꢀµFꢀ)*
(ꢀ≥ꢀ5ꢀ•ꢀ105ꢀMΩꢀ)*
Recommendedꢀvoltageꢀ≤ꢀ560ꢀVDC
Impedance Graph
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
5
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Environmental Test Data
Test
IEC Publication
Procedure
1.25ꢀxꢀVR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
Endurance
EN/IEC 60384–14
Vibration
IEC 60068–2–6 Test Fc
IECꢀ60068–2–29ꢀTestꢀEb
IEC 60068–2–14 Test Na
IEC 60384–14
3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump
1,000ꢀbumpsꢀatꢀ390ꢀm/s2
Change of Temperature
ActiveꢀFlammability
PassiveꢀFlammability
Damp Heat Steady State
Upper and lower rated temperature 5 cycles
VRꢀ+ꢀ20ꢀsurgeꢀpulsesꢀatꢀ2.5ꢀkVꢀ(pulseꢀeveryꢀ5ꢀseconds)
IECꢀ60384–1,ꢀIECꢀ60695–11–5ꢀNeedleꢀflameꢀtest
+40°Cꢀandꢀ93%ꢀRH,ꢀ56ꢀdays
IEC 60384–14
IECꢀ60068–2–78ꢀTestꢀCab
Approvals
Mark
Specification
File Number
EN/IEC 60384-14
V4413
UL 60384-14 and
CAN/CSA E60384-14
(310 VAC)
E97797
CQC08001026549
CQC11001060118
CQC13001087757
CQC14001116028
CQC13001101266
CQC14001116000
IEC 60384-14
Environmental Compliance
All KEMET EMI capacitors are RoHS compliant.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
6
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Table 1 – Ratings & Part Number Reference
Dimensions in mm
Capacitance
Value (µF)
Lead Spacing
(p)
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part
Number
B
H
9.0
L
0.033
0.047
0.068
0.10
0.10
0.15
0.15
0.22
0.33
0.33
0.33
0.47
0.47
0.47
0.47
0.68
0.68
0.82
0.47
0.56
0.56
0.68
1.0
1.0
1.5
1.5
2.2
1.0
1.5
2.2
3.3
4.7
4.7
6.8
2.2
3.3
4.7
6.8
10.0
4.0
4.0
13.0
13.0
13.0
13.0
13.0
13.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
18.0
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
26.5
32.0
32.0
32.0
32.0
32.0
32.0
32.0
41.5
41.5
41.5
41.5
41.5
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
500
500
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
100
100
100
100
100
46KF2330(1)P0(2)
46KF2470(1)P0(2)
46KF2680(1)P0(2)
46KF3100(1)P1(3)
46KF3100(1)P0(2)
46KF3150(1)P0(3)
46KI3150(1)P0(2)
46KI3220(1)P0(2)
46KI3330(1)P0(2)
46KI3330(1)P1(2)
46KI3330(1)P2(2)
46KI3470(1)P0(2)
46KI3470(1)P1(3)
46KI3470(1)P2(3)
46KI3470(1)P3(2)
46KI3680(1)P1(3)
46KI3680(1)P0(2)
46KI3820(1)P0(3)
46KN3470(1)P1(2)
46KN3560(1)P1(3)
46KN3560(1)P0(2)
46KN3680(1)P0(2)
46KN4100(1)P1(3)
46KN4100(1)P0(2)
46KN4150(1)P1(3)
46KN4150(1)P0(2)
46KN4220(1)P0(3)
46KR4100(1)P0(2)
46KR4150(1)P0(2)
46KR4220(1)P0(2)
46KR4330(1)P0(2)
46KR4470(1)P1(3)
46KR4470(1)P0(2)
46KR4680(1)P0(2)
46KW4220(1)P0(2)
46KW4330(1)P0(2)
46KW4470(1)P0(2)
46KW4680(1)P0(2)
46KW5100(1)P0(2)
R46KF2330(1)P0(2)
R46KF2470(1)P0(2)
R46KF2680(1)P0(2)
R46KF3100(1)P1(3)
R46KF3100(1)P0(2)
R46KF3150(1)P0(3)
R46KI3150(1)P0(2)
R46KI3220(1)P0(2)
R46KI3330(1)P0(2)
R46KI3330(1)P1(2)
R46KI3330(1)P2(2)
R46KI3470(1)P0(2)
R46KI3470(1)P1(3)
R46KI3470(1)P2(3)
R46KI3470(1)P3(2)
R46KI3680(1)P1(3)
R46KI3680(1)P0(2)
R46KI3820(1)P0(3)
R46KN3470(1)P1(2)
R46KN3560(1)P1(3)
R46KN3560(1)P0(2)
R46KN3680(1)P0(2)
R46KN4100(1)P1(3)
R46KN4100(1)P0(2)
R46KN4150(1)P1(3)
R46KN4150(1)P0(2)
R46KN4220(1)P0(3)
R46KR4100(1)P0(2)
R46KR4150(1)P0(2)
R46KR4220(1)P0(2)
R46KR4330(1)P0(2)
R46KR4470(1)P1(3)
R46KR4470(1)P0(2)
R46KR4680(1)P0(2)
R46KW4220(1)P0(2)
R46KW4330(1)P0(2)
R46KW4470(1)P0(2)
R46KW4680(1)P0(2)
R46KW5100(1)P0(2)
9.0
5.0
5.0
6.0
6.0
5.0
6.0
7.5
9.0
6.0
8.5
9.0
6.0
11.0
11.0
12.0
12.0
11.0
12.0
13.5
12.5
17.5
14.5
12.5
17.5
18.5
16.0
19.0
19.0
15.0
15.0
16.0
16.0
17.0
18.5
18.5
20.0
22.0
17.0
20.0
22.0
28.0
28.0
33.0
37.0
22.0
24.0
28.5
32.0
40.0
7.5
10.0
11.0
11.0
6.0
6.0
7.0
7.0
8.5
10.0
10.0
11.0
13.0
9.0
11.0
13.0
14.0
14.0
18.0
22.0
11.0
13.0
16.0
19.0
20.0
Lead
Spacing (p)
New KEMET
Part Number
Legacy
Part Number
Capacitance Value (µF)
B (mm)
H (mm)
L (mm)
dV/dt (V/µs)
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) M = ±20%, K = ±10%
(3) M = ±20% (only available tolerance).
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
7
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary
solderꢀmaterial.ꢀThisꢀhasꢀincreasedꢀtheꢀliquidusꢀtemperatureꢀfromꢀ183°CꢀforꢀSnPbꢀeutecticꢀalloysꢀtoꢀ217ꢀ–ꢀ221°Cꢀforꢀtheꢀnewꢀ
alloys.ꢀAsꢀaꢀresult,ꢀtheꢀheatꢀstressꢀtoꢀtheꢀcomponents,ꢀevenꢀinꢀwaveꢀsoldering,ꢀhasꢀincreasedꢀconsiderablyꢀdueꢀtoꢀhigherꢀpre-
heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene
isꢀ160ꢀ–ꢀ170°C).ꢀWaveꢀsolderingꢀcanꢀbeꢀdestructive,ꢀespeciallyꢀforꢀmechanicallyꢀsmallꢀpolypropyleneꢀcapacitorsꢀ(withꢀleadꢀ
spacingꢀofꢀ5ꢀ–ꢀ15ꢀmm).ꢀꢀGreatꢀcareꢀmustꢀbeꢀtakenꢀduringꢀsoldering.ꢀTheꢀrecommendedꢀsolderꢀprofilesꢀfromꢀKEMETꢀshouldꢀbeꢀ
used.ꢀConsultꢀKEMETꢀwithꢀanyꢀquestions.ꢀInꢀgeneral,ꢀtheꢀwaveꢀsolderingꢀcurveꢀfromꢀIECꢀPublicationꢀ61760-1ꢀEditionꢀ2ꢀservesꢀ
as a solid guideline for successful soldering. See Figure 1.
Reflowꢀsolderingꢀisꢀnotꢀrecommendedꢀforꢀthrough-holeꢀfilmꢀcapacitors.ꢀExposingꢀcapacitorsꢀtoꢀaꢀsolderingꢀprofileꢀinꢀexcessꢀ
ofꢀtheꢀabove-recommendedꢀlimitsꢀmayꢀresultꢀtoꢀdegradationꢀofꢀorꢀpermanentꢀdamageꢀtoꢀtheꢀcapacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components.
Insertꢀthrough-holeꢀpartsꢀafterꢀcuringꢀsurfaceꢀmountꢀparts.ꢀConsultꢀKEMETꢀtoꢀdiscussꢀtheꢀactualꢀtemperatureꢀprofileꢀinꢀ
theꢀoven,ꢀifꢀthrough-holeꢀcomponentsꢀmustꢀpassꢀthroughꢀtheꢀadhesiveꢀcuringꢀprocess.ꢀAꢀmaximumꢀtwoꢀsolderingꢀcyclesꢀ
isꢀrecommended.ꢀAllowꢀtimeꢀforꢀtheꢀcapacitorꢀsurfaceꢀtemperatureꢀtoꢀreturnꢀtoꢀnormalꢀtemperatureꢀbeforeꢀperformingꢀtheꢀ
second soldering cycle.
Manual Soldering Recommendations
Wave Soldering Recommendations
ꢀ00
Following is the recommendation for manual
soldering with a soldering iron.
2 ꢅꢀ seconds maꢆimum
260°C
250
Firstꢊaꢋe
Second ꢊaꢋe
Recommended Soldering Temperature
200
150
100
50
400
∆ꢇ ꢉ 150°C
Coolinꢄ
Preꢈeatinꢄ
ca 2°Cꢂsecond
350
300
250
200
150
100
50
ca ꢀꢃ5°Cꢂsecond typical
ca 5°Cꢂsecond
115 °C maꢆ
ꢇpreꢈeat
100 °C
ꢀꢉpiꢊal
0
0
40
ꢁ0
120
160
200
240
ꢀiꢁe ꢄꢈꢇ
0
0
1
2
3
4
5
6
7
Soldering time (seconds)
The soldering iron tip temperature should
beꢀsetꢀatꢀ350°Cꢀ(+10°Cꢀmaximum),ꢀwithꢀtheꢀ
solderingꢀdurationꢀnotꢀtoꢀexceedꢀmoreꢀthan
3 seconds.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
8
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1.ꢀTheꢀtableꢀindicatesꢀtheꢀmaximumꢀset-upꢀtemperatureꢀofꢀtheꢀsolderingꢀprocess.
Maximum
Maximum Preheat
Peak Soldering
Temperature
Temperature
Dielectric
Film Material
Capacitor Capacitor Capacitor Capacitor Capacitor
Pitch
Pitch
Pitch
Pitch
Pitch
≤ꢀ10ꢀmm = 15 mm > 15 mm ≤ꢀ15ꢀmm > 15 mm
Polyester
Polypropylene
Paper
130°C
100°C
130°C
130°C
110°C
130°C
130°C
130°C
140°C
270°C
260°C
270°C
270°C
270°C
270°C
Polyphenylene
Sulphide
150°C
150°C
160°C
270°C
270°C
2.ꢀTheꢀmaximumꢀtemperatureꢀmeasuredꢀinsideꢀtheꢀcapacitor:ꢀsetꢀtheꢀtemperatureꢀsoꢀthatꢀtheꢀmaximumꢀtemperatureꢀinsideꢀ
theꢀelementꢀisꢀbelowꢀtheꢀlimit.
Maximum Temperature
Dielectric Film Material
Measured Inside the Element
Polyester
Polypropylene
Paper
160°C
110°C
160°C
160°C
Polyphenylene Sulphide
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectiveꢀdipꢀsolderingꢀisꢀaꢀvariationꢀofꢀreflowꢀsoldering.ꢀInꢀthisꢀmethod,ꢀtheꢀprintedꢀcircuitꢀboardꢀwithꢀthrough-holeꢀ
componentsꢀtoꢀbeꢀsolderedꢀisꢀpreheatedꢀandꢀtransportedꢀoverꢀtheꢀsolderꢀbathꢀasꢀitꢀisꢀinꢀnormalꢀflowꢀsoldering,ꢀwithoutꢀ
touchingꢀtheꢀsolder.ꢀWhenꢀtheꢀboardꢀisꢀoverꢀtheꢀbath,ꢀitꢀisꢀstopped.ꢀPre-designedꢀsolderꢀpotsꢀareꢀliftedꢀfromꢀtheꢀbathꢀwithꢀ
moltenꢀsolder,ꢀonlyꢀatꢀtheꢀplacesꢀofꢀtheꢀselectedꢀcomponents,ꢀandꢀpressedꢀagainstꢀtheꢀlowerꢀsurfaceꢀofꢀtheꢀboardꢀtoꢀsolderꢀ
the components.
Theꢀtemperatureꢀprofileꢀforꢀselectiveꢀsolderingꢀisꢀsimilarꢀtoꢀtheꢀdoubleꢀwaveꢀflowꢀsolderingꢀoutlinedꢀinꢀthisꢀdocument.ꢀ
However, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of
overheatingꢀisꢀgreaterꢀthanꢀinꢀdoubleꢀwaveꢀflowꢀsoldering,ꢀandꢀgreatꢀcareꢀmustꢀbeꢀtakenꢀsoꢀthatꢀtheꢀpartsꢀdoꢀnotꢀoverheat.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
9
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Construction
Detailed Cross Section
Molded Plastic
Case
Single-sided Metallized
Polypropylene Film
(First Layer)
Molded Plastic Self-Extinguishing
Case
Resin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Margin
Margin
Metal Contact
Layer
Metal Contact
Layer
Margin
Leads
Winding Scheme
Single-sided
Metallized
Polypropylene
Film
1 Section
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
10
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Marking
Lead Spacing 10 mm
FRONT
TOP
Capacitance Tolerance
Series,
Approval
Marks
Dielectric
Code, Safety
Class, Self
Healing
Manufacturer’s
Logo
Capacitance,
Rated Voltage
IEC Climatic
Category
Date Code
Manufacturing
Plant
Passive Flammability
Category
Lead Spacing 15 mm, 22.5 mm (small case sizes)
FRONT
TOP
Capacitance Tolerance
Series,
Approval
Marks
Dielectric
Code, Safety
Class, Self
Healing
Manufacturer’s
Logo
Capacitance,
Rated Voltage
IEC Climatic
Category
Date Code
Manufacturing
Plant
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
11
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Marking cont'd
FRONT
TOP
Series Dielectric Safety
Self
Healing
Code
Class
Capacitance,
Capacitance
Tolerance,
Manufacturer’s
Logo
Approval
Marks
Rated Voltage
IEC Climatic
Category
QA Number
Passive
Flammability Manufacturing Date Code
Category
Plant
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year
Code
Month
Code
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
M
N
P
R
S
January
February
March
1
2
3
4
5
6
7
8
9
O
N
D
April
May
T
June
U
V
W
X
A
B
C
D
E
July
August
September
October
November
December
F
H
J
K
L
M
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
12
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Packaging Quantities
Standard
Reel
ø 355 mm
Lead Spacing Thickness Height Length
Bulk
Bulk
Large Reel
ø 500 mm
Ammo
Taped
(mm)
(mm)
(mm)
(mm)
Short Leads Long Leads
4
5
6
9
13
13
13
2000
1300
1000
1800
1500
1200
750
1500
1250
1000
1000
800
11
12
600
10
500
680
5
6
11
12
18
18
18
18
18
18
18
18
18
2000
1750
1000
1000
900
1000
900
700
700
500
500
520
500
350
600
500
500
350
–
1250
1000
1000
800
800
680
680
500
500
440
410
380
340
6
17.5
13.5
18.5
14.5
12.5
16
7.5
7.5
8.5
9
800
15
1000
1000
750
300
270
300
–
700
650
10
11
600
500
19
450
6
7
15
16
26.5
26.5
26.5
26.5
26.5
26.5
805
700
468
396
360
300
500
500
300
300
250
200
–
–
–
–
–
–
700
550
450
350
350
300
464
380
280
235
217
–
8.5
10
11
13
17
22.5
18.5
20
22
9
17
20
22
28
33
37
37
32
32
32
32
32
32
32
816
560
480
352
256
168
168
408
336
288
176
128
112
112
–
–
–
–
–
–
–
450
350
300
–
–
–
–
–
–
–
–
11
13
14
18
22
22
27.5
37.5
–
–
–
11
13
16
19
20
22
24
41.5
41.5
41.5
41.5
41.5
420
360
216
192
126
252
216
108
96
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
28.5
32
40
84
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
13
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Lead Taping & Packaging (IEC 60286–2)
ꢀigꢁre ꢂ
Lead ꢃpaꢄing ꢂꢅ ꢆꢆ
ꢀigꢁre ꢂ
Lead ꢃpaꢄing ꢅꢆ ꢇꢇ
ꢀigꢁre ꢂ
Lead ꢃpaꢄing ꢅꢅꢆꢇ ꢈ ꢅꢉꢆꢇ ꢊꢊ
P
P
ꢂ
ꢂ
P2
ꢄd
A
ꢆ
P1 P0
ꢃ0
F
P1
P2
Aꢅꢆ
t
Taping Specification
Dimensions (mm)
Lead Space
Description
Symbol
10
15
22.5
Fig. 3
0.8
27.5
Fig. 3
0.8
Tol.
Fig. 1
0.6
Fig. 2
0.6–0.8
Lead wire diameter
Taping lead space
d
P
±0.05
±1
25.4
12.7
7.7
25.4
12.7
5.2
12.7
15
38.1
12.7
7.8
38.1
12.7
5.3
Feedꢀholeꢀleadꢀspaceꢀ*
Centering of the lead wire
Centeringꢀofꢀtheꢀbody
Leadꢀspacingꢀ(pitch)ꢀ***
Component alignment
P0
P1
P2
F
±0.2ꢀ**
±0.7
12.7
10
19.05
22.5
0
19.05
27.5
0
±1.3
+0.6/−0.1
∆h
0
0
±2
Height of component
from tape center
H0ꢀ****
18.5
18.5
18.5
18.5
±0.5
Carrier tape width
Hold down tape width
Hole position
W
W0
W1
W2
D0
t
18
9
18
10
9
18
10
9
18
10
9
+1/−0.5
Minimum
±0.5
9
Hold down tape position
Feed hole diameter
Total tape thickness
3
3
3
3
Maximum
±0.2
4
4
4
4
0.7
0.7
0.7
0.7
±0.2
* 15 mm also available
** Maximum of 1 mm on 20 lead spaces
*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request
**** H0 = 16.5 mm is available upon request
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
14
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Specifications
Dimensions (mm)
H
W
T
360
340
59
H
W
T
Reel Specifications
Dimensions (mm)
Reel Size
D
H
W
Standard
Large
355
500
30
55ꢀMaximum
25
H
D
W
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
15
Metallized Polypropylene Film EMI Suppression Capacitors
R46 (Miniature) Series, Class X2, 275 VAC, 110°C
KEMET Electronics Corporation Sales Offices
Forꢀaꢀcompleteꢀlistꢀofꢀourꢀglobalꢀsalesꢀo ꢀꢀces,ꢀpleaseꢀvisitꢀwww.kemet.com/sales.
Disclaimer
Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀ
checkingꢀandꢀverifyingꢀtheꢀextentꢀtoꢀwhichꢀtheꢀInformationꢀcontainedꢀinꢀthisꢀpublicationꢀisꢀapplicableꢀtoꢀanꢀorderꢀatꢀtheꢀtimeꢀtheꢀorderꢀisꢀplaced.ꢀAllꢀInformationꢀgivenꢀ
hereinꢀisꢀbelievedꢀtoꢀbeꢀaccurateꢀandꢀreliable,ꢀbutꢀitꢀisꢀpresentedꢀwithoutꢀguarantee,ꢀwarranty,ꢀorꢀresponsibilityꢀofꢀanyꢀkind,ꢀexpressedꢀorꢀimplied.
StatementsꢀofꢀsuitabilityꢀforꢀcertainꢀapplicationsꢀareꢀbasedꢀonꢀKEMETꢀElectronicsꢀCorporation’sꢀ(“KEMET”)ꢀknowledgeꢀofꢀtypicalꢀoperatingꢀconditionsꢀforꢀsuchꢀ
applications,ꢀbutꢀareꢀnotꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀ
TheꢀInformationꢀisꢀintendedꢀforꢀuseꢀonlyꢀbyꢀcustomersꢀwhoꢀhaveꢀtheꢀrequisiteꢀexperienceꢀandꢀcapabilityꢀtoꢀdetermineꢀtheꢀcorrectꢀproductsꢀforꢀtheirꢀapplication.ꢀAnyꢀ
technicalꢀadviceꢀinferredꢀfromꢀthisꢀInformationꢀorꢀotherwiseꢀprovidedꢀbyꢀKEMETꢀwithꢀreferenceꢀtoꢀtheꢀuseꢀofꢀKEMET’sꢀproductsꢀisꢀgivenꢀgratis,ꢀandꢀKEMETꢀassumes
noꢀobligationꢀorꢀliabilityꢀforꢀtheꢀadviceꢀgivenꢀorꢀresultsꢀobtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failuresꢀmayꢀstillꢀoccur.ꢀAccordingly,ꢀcustomerꢀapplicationsꢀwhichꢀrequireꢀaꢀhighꢀdegreeꢀofꢀreliabilityꢀorꢀsafetyꢀshouldꢀemployꢀsuitableꢀdesignsꢀorꢀotherꢀsafeguardsꢀ
(suchꢀasꢀinstallationꢀofꢀprotectiveꢀcircuitryꢀorꢀredundancies)ꢀinꢀorderꢀtoꢀensureꢀthatꢀtheꢀfailureꢀofꢀanꢀelectricalꢀcomponentꢀdoesꢀnotꢀresultꢀinꢀaꢀriskꢀofꢀpersonalꢀinjury
or property damage.
Althoughꢀallꢀproduct–relatedꢀwarnings,ꢀcautionsꢀandꢀnotesꢀmustꢀbeꢀobserved,ꢀtheꢀcustomerꢀshouldꢀnotꢀassumeꢀthatꢀallꢀsafetyꢀmeasuresꢀareꢀindictedꢀorꢀthatꢀotherꢀ
measuresꢀmayꢀnotꢀbeꢀrequired.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
F3094_R46_X2_275_110C_MIN • 12/10/2018
16
相关型号:
R46KI368052P0K
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560V, 0.68uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
R46KI3680CKP1M
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560V, 0.68uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
R46KI382000P0M
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560V, 0.82uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
R46KI382051P0M
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560V, 0.82uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
R46KI3820CKP0M
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560V, 0.82uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
R46KI3820DQP0M
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 560V, 0.82uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
©2020 ICPDF网 联系我们和版权申明