R5T510X477K004AGA030

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade

Multiple Anode Low ESR MnO₂

Overview

The low ESR, surge-robust T510 Series is designed for

demanding applications that require high surge current

and high ripple current capability. This series builds upon

the proven capabilities of our industrial grade tantalum

chip capacitors to offer several advantages such as low

ESR, high ripple current capability, excellent capacitance

stability, and improved resistance to high in-rush currents.

These beneﬁts are achieved though the utilization of multiple

anodes as well as high-stress, low impedance electrical

conditioning performed prior to screening. This series is

classiﬁed as MSL (Moisture Sensitivity Level) 1 under J STD

020: unlimited ﬂoor life time at ≤30°C/85% RH.

Beneﬁts

• Complies with AEC–Q200

• Meets or exceeds EIA standard 535BAAC

• Taped and reeled per EIA 481

• High surge current capability

• Optional gold-plated terminations

• High ripple current capability

• 100% surge current test

• 100% steady-state accelerated aging

• Capacitance values of 10 μF to 1,000 μF

• Tolerances of ±10% and ±20%

• Voltage rating of 4 – 50 VDC

• Case sizes E and X

• ESR as low as 18 mΩ

• RoHS Compliant and lead-free terminations

• Operating temperature range of −55˚C to +125˚C

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Applications

Typical applications include decoupling and ﬁltering in automotive end applications, such as DC/DC converters, portable

electronics, telecommunications, and control units requiring high ripple current capability.

Environmental Compliance

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

One world. One KEMET

T2055_T510_AUTO • 9/19/2016

1

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

K-SIM

For a detailed analysis of speciﬁc part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET

K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.

Ordering Information

T

510

X

477

M

006

A

T

A030

Rated Failure

Voltage Rate/

(VDC) Design

Capacitor

Class

Case Capacitance Capacitance

Packaging

(C-Spec)

Series

Termination Finish

ESR

Size

Code (pF)

Tolerance

T =

Tantalum

Multiple

Anode

E

X

First two

digits

K = ±10%

004 = 4

A = T = 100% Matte Tin (Sn) Plated*

A = AUTO grade

Blank = 7"

Reel

M = ±20% 006 = 6.3 N/A H = Standard Solder Coated (SnPb product

Low ESR

represent

signiﬁcant

ﬁgures. Third

digit speciﬁes

number of

zeros.

010 = 10

015 = 15

020 = 20

025 = 25

035 = 35

050 = 50

5% Pb minimum)

G = Gold Plated (A, B, C, D, X only) ESR in mΩ at

room temperature

(30mΩ)

030 = Maximum

7280 = 13"

Reel

Performance Characteristics

Item

Performance Characteristics

Operating Temperature

Rated Capacitance Range

Capacitance Tolerance

Rated Voltage Range

DF (120 Hz)

−55°C to 125°C

10 – 1,000 µF at 120 Hz/25°C

K Tolerance (10%), M Tolerance (20%)

4 – 50 V

Refer to Part Number Electrical Speciﬁcation Table

≤ 0.01 CV (µA) at rated voltage after 5 minutes

ESR (100 kHz)

Leakage Current

T2055_T510_AUTO • 9/19/2016

2

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Qualiﬁcation

Test

Condition

Characteristics

Within ±10% of initial value

Within initial limits

Δ C/C

DF

85°C at rated voltage, 2,000 hours

125°C at 2/3 rated voltage, 2,000 hours

Endurance

DCL

ESR

Δ C/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±10% of initial value

Within initial limits

Storage Life

Thermal Shock

125°C at 0 volts, 2,000 hours

DCL

ESR

Δ C/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±5% of initial value

Within initial limits

MIL–STD–202, Method 107, Condition B, mounted,

−55C° to 125° C, 1,000 cycles

DCL

ESR

+25°C

IL*

Within 1.25 x initial limit

Within initial limits

−55°C

±10%

IL

+85°C

±10%

+125°C

±20%

Extreme temperature exposure at a

succession of continuous steps at +25ºC,

−55ºC, +25ºC, +85ºC, +125ºC, +25ºC

Δ C/C

Temperature Stability

Surge Voltage

DF

IL

1.5 x IL

10 x IL

1.5 x IL

12 x IL

DCL

IL

n/a

Δ C/C

DF

Within ±5% of initial value

Within initial limits

85°C, 1.32 x rated voltage 1,000 cycles

(125°C, 1.2 x rated voltage)

DCL

ESR

Δ C/C

DF

Within initial limits

Within ±10% of initial value

Within initial limits

MIL–STD–202, Method 213, Condition I, 100 G peak

MIL–STD–202, Method 204, Condition D, 10 Hz to

2,000 Hz, 20 G peak

Mechanical Shock/

Vibration

DCL

Within initial limits

*IL = Initial limit

Certiﬁcation

KEMET’s Internal Qualiﬁcation Plan for this Tantalum series of capacitors follows AEC–Q200 guidelines. Standard catalog

part types ordered without a speciﬁc automotive designator, i.e., sufﬁx AUTO or four digit customer speciﬁc designator

(C-Spec), are not considered KEMET Automotive Grade tantalum capacitors.

T2055_T510_AUTO • 9/19/2016

3

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Electrical Characteristics

Impedance, ESR vs. Frequency

100

Capacitance vs. Frequency

100

10

1

T510ꢂ22ꢃM0ꢄ5ATE100ꢅꢆMꢇ

T510ꢂꢄꢄꢃM0ꢄ5ATE0ꢃ5ꢅꢆMꢇ

T510EꢈꢉꢃM0ꢄ5ATE050ꢅꢆMꢇ

10

T510ꢂ22ꢃM0ꢄ5ATE100ꢅESR

T510ꢂꢄꢄꢃM0ꢄ5ATE0ꢃ5ꢅESR

T510EꢈꢉꢃM0ꢄ5ATE050ꢅESR

1

T510ꢁ22ꢂM0ꢃ5ATE100

T510ꢁꢃꢃꢂM0ꢃ5ATE0ꢂ5

T510EꢄꢅꢂM0ꢃ5ATE050

0ꢀ1

0ꢀ01

100

1ꢁ000

10ꢁ000

100ꢁ000

1ꢁ000ꢁ000

10ꢁ000ꢁ000

100

1ꢀ000

10ꢀ000

100ꢀ000

1ꢀ000ꢀ000

10ꢀ000ꢀ000

ꢋreꢌꢍeꢄcꢎ ꢈꢏꢐꢊ

ꢃreꢅꢆeꢁcꢇ ꢂꢈꢉꢄ

Dimensions – Millimeters (Inches)

Metric will govern

CATꢀOꢆE ꢊꢍꢌ Eꢉꢆ ꢇꢅEꢈ

ꢈ

SꢅꢆE ꢇꢅEꢈ

AꢉOꢆE ꢊꢋꢌ Eꢉꢆ ꢇꢅEꢈ

ꢂOTTOM ꢇꢅEꢈ

A

ꢂ

ꢀ

E

ꢃ

ꢄ

Termination cutout

at ꢎEMETꢏs optionꢐ

eitꢑer end

ꢁ

T

S

G

S

R

L

Total

Weight

Case Size

Component

F ±0.1 S ±0.3 B ±0.15

±(.004) ±(.012) (Ref) ±.006

X

(Ref)

P

R

T

A

G

E

KEMET EIA

L

W

H

(mg)

(Ref) (Ref) (Ref) (Min) (Ref) (Ref)

7.3±0.3

4.3±0.3

4.0±0.3

2.4

1.3

(0.051)

1.3

(0.051)

0.5

(0.020)

0.5

(0.020)

0.10±0.10

1.7

1.0

0.13

3.8

3.5

7343–43

430.15

500.73

X

(0.287±0.012) (0.169±0.012) (0.157±0.012) (0.094)

7.3±0.3 6.0±0.3 3.6±0.2 4.1

(0.287±0.012) (0.236±0.012) (0.142±0.008) (0.161)

(0.004±0.004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138)

0.10±0.10

(0.004±0.004)

0.13

3.8

3.5

7360–38

n/a

E

(0.005) (0.150) (0.138) (0.138)

Notes: (Ref) – Dimensions provided for reference only. For low proﬁle cases, no dimensions are provided for B, P or R because these cases do not have a bevel or

a notch.

These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative.

T2055_T510_AUTO • 9/19/2016

4

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Table 1 – Ratings & Part Number Reference

Maximum

Operating

Temp

Case

Code/

Case Size

Rated Rated

Voltage Cap

KEMET Part

Number

DC

Leakage

Maximum Allowable

Ripple Current

DF

ESR

MSL

% @ +20ºC mΩ @ +20ºC

120 Hz

Max

mA @

Reﬂow

Temp

≤ 260ºC

(See below for

part options)

µA @ +20ºC

Max/5 Min

mA @ +25ºC

100 kHz

VDC @ 85ºC

µF

KEMET/EIA

100 kHz

Max

30

35

18

+85ºC 100 +125ºC 100

ºC

kHz

2700

2499

3581

2700

3083

3168

2499

2338

2499

2338

2204

2148

1479

1653

1909

1834

1994

1834

2148

1559

1350

1479

mA @

kHz

1200

1111

1592

1200

1370

1408

1111

1039

1111

1039

980

955

657

735

848

815

886

815

125

4

680

1000

470

680

330

150

220

100

68

100

22

33

47

10

X/7343-43

E/7360-38

X/7343-43

E/7360-38

X/7343-43

E/7360-38

X/7343-43

E/7360-38

X/7343-43

T510X687(1)004A(2)A030

T510X108(1)004A(2)A035

T510E108(1)004A(2)A018

T510X477(1)006A(2)A030

T510X687(1)006A(2)A023

T510E687(1)006A(2)A023

T510X337(1)010A(2)A035

T510X157(1)016A(2)A040

T510X227(1)016A(2)A040

T510X107(1)020A(2)A035

T510X107(1)020A(2)A040

T510X107(1)020A(2)A045

T510X686(1)025A(2)A045

T510E107(1)025A(2)A050

T510X226(1)035A(2)A100

T510X226(1)035A(2)A080

T510X226(1)035A(2)A060

T510X336(1)035A(2)A065

T510X476(1)035A(2)A055

T510X476(1)035A(2)A065

T510E476(1)035A(2)A050

T510X106(1)050A(2)A090

T510X106(1)050A(2)A120

T510X226(1)050A(2)A100

27.2

40.0

29.6

42.8

33.0

24.0

35.2

20.0

17.0

25.0

7.7

6.0

10.0

8.0

6.0

8.0

6.0

8.0

3000

2777

3979

3000

3426

3520

2777

2598

2777

2598

2449

2387

1643

1837

2121

2038

2216

2038

2387

1732

1500

1643

mA @

1

6.3

10

16

20

25

35

50

30

23

35

40

35

40

45

50

100

80

60

65

55

65

50

90

120

100

7.7

11.6

16.5

5.0

955

693

600

657

125

10

22

5.0

11.0

% @ +20ºC mΩ @ +20ºC

120 Hz

Max

mA @

Reﬂow

Temp

≤ 260ºC

(See below for

part options)

µA @ +20ºC

Max/5 Min

VDC @ 85ºC

µF

KEMET/EIA

100 kHz

Max

+25ºC 100 +85ºC 100 +125ºC 100

ºC

kHz

Maximum

Operating

Temp

Rated

Voltage

Rated

Cap

Case Code/

Case Size

DC

Leakage

Maximum Allowable

Ripple Current

KEMET Part Number

DF

ESR

MSL

(1) To complete KEMET part number, insert M for ± 20% or K for ± 10%. Designates Capacitance tolerance.

(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N =

Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish.

Refer to Ordering Information for additional detail.

Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will

be marked with the higher voltage rating. Substitutions can include better than series.

T2055_T510_AUTO • 9/19/2016

5

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

120ꢀ

100ꢀ

ꢃ0ꢀ

ꢂ0ꢀ

ꢁ0ꢀ

20ꢀ

0ꢀ

Recommended Voltage Derating Guidelines

−55°C to 85°C

85°C to 125°C

% Change in Working DC

Voltage with Temperature

Recommended Maximum

Application Voltage

V_R

67% of V_R

33% of V_R

ꢀ Cꢄanꢅe in ꢆorꢇinꢅ ꢈC ꢉoltaꢅe

witꢄ Temperature

ꢂꢊꢀ

ꢋꢋꢀ

50% of V_R

Recommended Maꢌimum

Application ꢉoltaꢅe

ꢍAs ꢀ of Rated ꢉoltaꢅeꢎ

−55

25

ꢃ5

125

ꢇeꢈꢉeratꢊre ꢋꢌCꢍ

Ripple Current/Ripple Voltage

Permissible AC ripple voltage and current are related to

equivalent series resistance (ESR) and the power dissipation

capabilities of the device. Permissible AC ripple voltage

which may be applied is limited by two criteria:

1. The positive peak AC voltage plus the DC bias voltage,

if any, must not exceed the DC voltage rating of the

capacitor.

2. The negative peak AC voltage in combination with

bias voltage, if any, must not exceed the allowable limits

speciﬁed for reverse voltage. See the Reverse Voltage

section for allowable limits.

The maximum power dissipation by case size can be

determined using the table at right. The maximum power

dissipation rating stated in the table must be reduced with

increasing environmental operating temperatures. Refer to

the table below for temperature compensation requirements.

Maximum Power

Dissipation (P max)

mWatts at 25°C

w/+20°C Rise

KEMET Series

and Case Code

EIA

Case Code

A

3216–18

3528–21

6032–28

7343–31

7343–43

7360–38

3216–12

3528–12

6032–15

7343–20

7343–43

7360–38

75

B

85

C

110

150

165

200

60

D

X

E

S

T

70

U

90

V

125

270

285

T510X

T510E

Using the P max of the device, the maximum allowable rms

ripple current or voltage may be determined.

Temperature Compensation Multipliers

for Maximum Ripple Current

I(max) = √P max/R

T ≤ 25°C

T ≤ 85°C

T ≤ 125°C

E(max) = Z √P max/R

1.00

0.90

0.40

T= Environmental Temperature

I = rms ripple current (amperes)

E = rms ripple voltage (volts)

The maximum power dissipation rating must be reduced with increasing

environmental operating temperatures. Refer to the Temperature

Compensation Multiplier table for details.

P max = maximum power dissipation (watts)

R = ESR at speciﬁed frequency (ohms)

Z = Impedance at speciﬁed frequency (ohms)

T2055_T510_AUTO • 9/19/2016

6

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Reverse Voltage

Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong

polarity. The positive terminal is identiﬁed on the capacitor body by a stripe plus in some cases a beveled edge. A small

degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated

continuously in reverse mode, even within these limits.

Temperature

Permissible Transient Reverse Voltage

25°C

85°C

15% of Rated Voltage

5% of Rated Voltage

1% of Rated Voltage

125°C

Table 2 – Land Dimensions/Courtyard

Metric

Size

Code

Density Level A:

Maximum (Most) Land

Protrusion (mm)

Density Level B:

Median (Nominal) Land

Protrusion (mm)

Density Level C:

Minimum (Least) Land

Protrusion (mm)

KEMET

Case

EIA

W

L

S

V1

V2

W

L

S

V1

V2

W

L

S

V1

V2

E¹

7360–38 4.25

7343–43 2.55

2.77

3.67 10.22 7.30

3.67 10.22 5.60

4.13

2.37

3.87

9.12

6.80

4.03

1.99

4.03

8.26

6.54

X¹

2.77

2.43

2.37

3.87

9.12

5.10

2.33

1.99

4.03

8.26

4.84

Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reﬂow

solder processes.

Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reﬂow solder processes.

Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform

qualiﬁcation testing based on the conditions outlined in IPC standard 7351 (IPC–7351).

¹Height of these chips may create problems in wave soldering.

²Land pattern geometry is too small for silkscreen outline.

ꢁ1

L

ꢁ2

ꢀ

S

Grid ꢂlacement Courtꢃard

T2055_T510_AUTO • 9/19/2016

7

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Soldering Process

KEMET’s families of surface mount capacitors are

compatible with wave (single or dual), convection, IR,

or vapor phase reﬂow techniques. Preheating of these

components is recommended to avoid extreme thermal

stress. KEMET's recommended proﬁle conditions for

convection and IR reﬂow reﬂect the proﬁle conditions of the

IPC/J–STD–020D standard for moisture sensitivity testing.

The devices can safely withstand a maximum of three reﬂow

passes at these conditions.

Proﬁle Feature

Preheat/Soak

SnPb Assembly Pb-Free Assembly

Temperature Minimum (T_Smin

)

100°C

150°C

200°C

Temperature Maximum (T_Smax

)

Time (t_s) from T_sminto T_smax

Ramp-up Rate (T_Lto T_P)

)

60 – 120 seconds

3°C/seconds maximum 3°C/seconds maximum

Liquidous Temperature (T_L)

Time Above Liquidous (t_L)

183°C

217°C

60 – 150 seconds

220°C*

235°C**

250°C*

260°C**

Peak Temperature (T_P)

Time within 5°C of Maximum

Peak Temperature (t_P)

20 seconds maximum 30 seconds maximum

Please note that although the X/7343–43 case size can

withstand wave soldering, the tall proﬁle (4.3 mm maximum)

dictates care in wave process development.

Ramp-down Rate (T_Pto T_L) 6°C/seconds maximum 6°C/seconds maximum

Time 25°C to Peak

Temperature

6 minutes maximum

8 minutes maximum

Note: All temperatures refer to the center of the package, measured on the

package body surface that is facing up during assembly reﬂow.

*Case Size D, E, P, Y, and X

Hand soldering should be performed with care due to the

difﬁculty in process control. If performed, care should be

taken to avoid contact of the soldering iron to the molded

case. The iron should be used to heat the solder pad,

applying solder between the pad and the termination, until

reﬂow occurs. Once reﬂow occurs, the iron should be

removed immediately. “Wiping” the edges of a chip and

heating the top surface is not recommended.

**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z

T_ꢁ

t_ꢁ

Maꢀimum Ramp ꢂp Rate ꢃ ꢄꢅCꢆsec

Maꢀimum Ramp ꢇown Rate ꢃ ꢈꢅCꢆsec

T_L

t_L

T_smaꢀ

During typical reﬂow operations, a slight darkening of the

gold-colored epoxy may be observed. This slight darkening is

normal and not harmful to the product. Marking permanency

is not affected by this change.

T_smin

t_s

25

25ꢅC to ꢁeaꢉ

ꢀiꢁe

Storage

Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in

other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,

and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp

and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum

storage humidity not exceed 60% relative humidity. Temperature ﬂuctuations should be minimized to avoid condensation

on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip

stock should be used promptly, preferably within three years of receipt.

T2055_T510_AUTO • 9/19/2016

8

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Construction

ꢇolaritꢆ Stripe ꢀꢃꢂ

Molded Epoꢅꢆ

Case

ꢀetaileꢁ Crꢂss ꢃectiꢂꢄ

Silver ꢇaint

ꢀꢉourtꢁ Laꢆerꢂ

ꢇolaritꢆ

ꢈevel ꢀꢃꢂ

Tantalum ꢄire

Leadframe

ꢀ− Catꢁodeꢂ

ꢄasꢁer

Tantalum ꢄire

ꢄeld

ꢀto attacꢁ wireꢂ

Carꢋon

ꢀTꢁird Laꢆerꢂ

ꢄasꢁer

Silver Adꢁesive

MnO₂

ꢀSecond Laꢆerꢂ

Ta₂O₅ꢊielectric

ꢀꢉirst Laꢆerꢂ

Leadframe

ꢀꢃ Anodeꢂ

Molded Epoꢅꢆ

Tantalum

Case

Capacitor Marking

Date Code *

1^stdigit = Last number of Year

2 = 2012

3 = 2013

4 = 2014

5 = 2015

6 = 2016

7 = 2017

ꢅEMET

MultiꢆAnode

MnO₂

ꢇolaritꢈ

ꢉndicator ꢊꢋꢌ

ꢇicofarad

Code

2^ndand 3^rddigit = Week of the

01 = 1^stweek of the Year to

52 = 52^ndweek of the Year

ꢅEMET

ꢉꢏ

Rated

ꢍoltaꢎe

Year

ꢏate

Codeꢀ

ꢀ 2ꢁ0 ꢂ ꢁ0^tꢃweeꢄ of 2012

T2055_T510_AUTO • 9/19/2016

9

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Tape & Reel Packaging Information

KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with

EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system

is compatible with all tape-fed automatic pick-and-place systems.

8 mm (0.315")

or

12 mm (0.472")

180 mm (7.0")

Top Tape Thickness

or

0.10 mm (0.004")

330 mm (13.0")

Maximum Thickness

Table 3 – Packaging Quantity

Tape Width

Case Code

7" Reel* 13" Reel*

(mm)

KEMET

EIA

S

T

M

U

L

W

Z

V

A

B

C

D

Q

Y

3216-12

3528-12

3528-15

6032-15

6032-19

7343-15

7343-17

7343-20

3216-18

3528-21

6032-28

7343-31

7343-12

7343-40

7343-43

7360-38

7360-20

8

12

8

2,500

2,000

1,000

2,000

500

1,000

500

10,000

8,000

5,000

3,000

9,000

8,000

3,000

2,500

3,000

2,000

2,500

8

12

X

E/T428P

H

1,000

* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.

T2055_T510_AUTO • 9/19/2016 10

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Figure 1 – Embossed (Plastic) Carrier Tape Dimensions

T

ꢀ 2

ꢎ10 pitcꢏes cumulative

tolerance on tape ꢐ 0ꢑ2 mmꢒ

2

E

1

ꢀo

ꢉꢊo

Ao

ꢁ

ꢅo

ꢂ

E

2

ꢄ

1

ꢄo

S

1

ꢀ

1

T

1

Emꢈossment

ꢁor cavitꢃ siꢋeꢆ

see ꢌote 1 Taꢈle ꢍ

Center Lines of Cavitꢃ

ꢉꢊ

1

Cover Tape

is for tape feeder reference onlꢃꢆ

includinꢇ draft concentric aꢈout ꢄ

ꢄ

1

o

.

ꢀser ꢁirectiꢂꢃ ꢂꢄ ꢀꢃreeliꢃꢅ

Table 4 – Embossed (Plastic) Carrier Tape Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

D₁Minimum

Note 1

1.0

R Reference S₁Minimum

T₁

Tape Size

D₀

E₁

P₀

P₂

T Maximum

Note 2

25.0

Note 3

Maximum

8 mm

12 mm

16 mm

2.0±0.05

(0.079±0.002)

(0.039)

(0.984)

1.5+0.10/−0.0

(0.059+0.004/−0.0)

1.75±0.10

(0.069±0.004) (0.157±0.004)

4.0±0.10

0.600

(0.024)

0.100

(0.004)

1.5

(0.059)

30

(0.024)

2.0±0.1

(0.079±0.059)

(1.181)

Variable Dimensions — Millimeters (Inches)

B₁Maximum

Note 4

Tape Size

Pitch

E₂Minimum

F

P₁

T₂Maximum W Maximum A₀, B₀& K₀

4.35

(0.171)

6.25

(0.246)

3.5±0.05

2.0±0.05 or 4.0±0.10

2.5

(0.098)

8.3

(0.327)

8 mm

Single (4 mm)

(0.138±0.002) (0.079±0.002 or 0.157±0.004)

Single (4 mm)

& Double (8

mm)

2.0±0.05 (0.079±0.002) or

8.2

(0.323)

10.25

(0.404)

5.5±0.05

4.6

(0.181)

12.3

(0.484)

12 mm

16 mm

4.0±0.10 (0.157±0.004) or

(0.217±0.002)

Note 5

8.0±0.10 (0.315 ±0.004)

12.1

(0.476)

14.25

(0.561)

7.5±0.10

4.0±0.10 (0.157±0.004)

(0.295±0.004) to 12.0±0.10 (0.472±0.004)

16.3

(0.642)

Triple (12 mm)

8.0 (0.315)

1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment

location and hole location shall be applied independent of each other.

2. The tape, with or without components, shall pass around R without damage (see Figure 4).

3. If S₁< 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).

4. B₁dimension is a reference dimension for tape feeder clearance only.

5. The cavity deﬁned by A₀, B₀and K₀shall surround the component with sufﬁcient clearance that:

(a) the component does not protrude above the top surface of the carrier tape.

(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.

(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).

(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see

Figure 3).

(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.

T2055_T510_AUTO • 9/19/2016 11

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Packaging Information Performance Notes

1. Cover Tape Break Force: 1.0 Kg minimum.

2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:

Tape Width

8 mm

Peel Strength

0.1 to 1.0 Newton (10 to 100 gf)

0.1 to 1.3 Newton (10 to 130 gf)

12 and 16 mm

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be

165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of

300 ±10 mm/minute.

3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA

Standards 556 and 624.

Figure 2 – Maximum Component Rotation

°

T

ꢀaꢁiꢂꢃꢂ Cꢄꢂꢅꢄꢆeꢆt ꢇꢄtatiꢄꢆ

ꢈꢄꢅ ꢉieꢊ

ꢀaꢁiꢂꢃꢂ Cꢄꢂꢅꢄꢆeꢆt ꢇꢄtatiꢄꢆ

ꢋiꢌe ꢉieꢊ

Tꢅpical ꢆocꢇet Centerline

ꢈaꢅe

ꢀaꢁiꢂꢃꢂ

°

T

s

ꢍiꢌth ꢎꢂꢂꢏ ꢇꢄtatiꢄꢆ ꢎ

)

ꢁꢂ12

1ꢃ – 200

20

10

ꢀo

ꢈaꢅe

ꢀaꢁiꢂꢃꢂ

°

S

ꢍiꢌth ꢎꢂꢂꢏ ꢇꢄtatiꢄꢆ ꢎ

)

ꢁꢂ12

1ꢃ – 5ꢃ

ꢄ2 – 200

20

10

5

Tꢅpical Component Centerline

Ao

Figure 4 – Bending Radius

Figure 3 – Maximum Lateral Movement

Emꢂossed

Carrier

ꢃuncꢄed

Carrier

ꢂ mm ꢃ 12 mm Tape

1ꢄ mm Tape

0ꢀ5 mm maꢁimum

1ꢀ0 mm maꢁimum

R

ꢀendinꢁ

Radius

R

T2055_T510_AUTO • 9/19/2016 12

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Figure 5 – Reel Dimensions

ꢄull Radiusꢅ

See ꢂote

ꢏꢐ ꢁꢊncludes

flanꢑe distortion

at outer edꢑeꢃ

Access ꢇole at

Slot Location

ꢁꢈ ꢉ0 mm minimumꢃ

ꢏ2 ꢁMeasured at ꢍuꢒꢃ

ꢀ

ꢁSee ꢂoteꢃ

A

ꢂ

C

ꢁArꢒor ꢍole

ꢏ1 ꢁMeasured at ꢍuꢒꢃ

diameterꢃ

ꢊf presentꢅ

tape slot in core

for tape startꢋ

2ꢌ5 mm minimum widtꢍ ꢎ

10ꢌ0 mm minimum deptꢍ

ꢆ

ꢁsee ꢂoteꢃ

ꢂoteꢋ ꢀrive spoꢓes optionalꢔ if usedꢅ dimensions ꢆ and ꢀ sꢍall applꢕꢌ

Table 5 – Reel Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

Tape Size

8 mm

A

B Minimum

C

D Minimum

178±0.20

(7.008±0.008)

or

330±0.20

(13.000±0.008)

1.5

(0.059)

13.0+0.5/−0.2

(0.521+0.02/−0.008)

20.2

(0.795)

12 mm

16 mm

Variable Dimensions — Millimeters (Inches)

Tape Size

N Minimum

W₁

W₂Maximum

W₃

8.4+1.5/−0.0

(0.331+0.059/−0.0)

12.4+2.0/−0.0

(0.488+0.078/−0.0)

16.4+2.0/−0.0

14.4

(0.567)

18.4

(0.724)

22.4

8 mm

50

(1.969)

Shall accommodate tape

width without interference

12 mm

16 mm

(0.646+0.078/−0.0)

(0.882)

T2055_T510_AUTO • 9/19/2016 13

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

Figure 6 – Tape Leader & Trailer Dimensions

Emꢌossed Carrier

Carrier Tape

ꢇuncꢈed Carrier

ꢉ mm ꢊ 12 mm onlꢋ

Round Sprocꢁet ꢂoles

ꢂꢃꢄꢅꢃ

Eꢀꢁ

Top Cover Tape

Elonꢃated Sprocꢁet ꢂoles

ꢄꢅ2 mm tape and widerꢆ

100 mm

Minimum Leader

ꢍ00 mm Minimum

Trailer

Components

1ꢀ0 mm Minimum

Top Cover Tape

Figure 7 – Maximum Camber

Elonꢅated sprocꢀet ꢄoles

ꢆꢇ2 mm ꢈ wider tapesꢉ

Carrier Tape

Round Sprocꢀet ꢁoles

1 mm Maꢂimumꢃ eitꢄer direction

Straiꢅꢄt Edꢅe

250 mm

T2055_T510_AUTO • 9/19/2016 14

Tantalum Surface Mount Capacitors – Automotive Grade

T510 Series Automotive Grade Multiple Anode Low ESR MnO₂

KEMET Electronic Corporation Sales Ofﬁces

For a complete list of our global sales ofﬁces, please visit www.kemet.com/sales.

Disclaimer

All product speciﬁcations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for

checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such

applications, but are not intended to constitute – and KEMET speciﬁcally disclaims – any warranty concerning suitability for a speciﬁc customer application or use.

The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no

obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component

failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards

(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or

property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other

measures may not be required.

KEMET is a registered trademark of KEMET Electronics Corporation.

T2055_T510_AUTO • 9/19/2016 15


型号：	R5T510X477K004AGA030
厂家：	KEMET CORPORATION
描述：	T510 Series Automotive Grade Multiple Anode Low ESR MnO2
文件：	总15页 (文件大小：1396K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

R5T510X477K004AGA030 [KEMET]

相关型号：

R5T510X477K004AHA030

R5T510X477K004ATA030

R5T510X477K006AGA030

R5T510X477K006AHA030

R5T510X477K006ATA030

R5T510X477K010AGA030

R5T510X477K010AHA030

R5T510X477K010ATA030

R5T510X477K020AGA030

R5T510X477K020AHA030

R5T510X477K020ATA030

R5T510X477K025AGA030