R66ED4150286-J [KEMET]
Film Capacitor, Polyester, 100V, 5% +Tol, 5% -Tol, 1.5uF, Through Hole Mount, RADIAL LEADED;型号: | R66ED4150286-J |
厂家: | KEMET CORPORATION |
描述: | Film Capacitor, Polyester, 100V, 5% +Tol, 5% -Tol, 1.5uF, Through Hole Mount, RADIAL LEADED 电容器 |
文件: | 总5页 (文件大小:531K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Not for new design. Use new F611-F612 Series.
R66
Loose
Taped
MKT Series
MeTAllIZeD POlyeSTeR FIlM CAPACITOR
D.C MulTIPuRPOSe APPlICATIONS
Fig.1
Fig. 2
Tꢀpicaꢁ appꢁications: this series combines small size,
good performances in by-passing, blocking and interference
suppression in low voltage applications (i.e.: AUTꢀMꢀTIVꢁ).
PRꢀDUCT CꢀDꢁ: R66
p = 7.5mm
Notꢂ: R66 series has replaced the R84 series (available only
upon request).
For new design we suggest the use of the R66 series
Pitch Box thickness (B)
Maximum dimensions (mm)
B
<3.5
0.5
≥4.0
0.6
Ød ±0.05
(mm)
7.5
(mm)
All
B max
B +0.1
H max
H +0.1
L max
L +0.2
All dimensions are in mm.
PRODuCT CODe SySTeM
geNeRAl TeChNICAl DATA
Diꢂꢁꢂctric: polyester film (polyethylene terephthalate).
The part number, comprising 14 digits, is formed as follows:
Pꢁatꢂs:
aluminium layer deposited by evaporation under
vacuum.
1
2
3
4
5
6
7
8
9
10 11 12 13 14
Windinꢃ: non-inductive type.
lꢂads: tinned wire.
D
-
R 6 6
Protꢂction: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame
retardant according to UL94.
Digit 1 to 3
Digit 4
Series code.
d.c. rated voltage:
C = 50V D = 63V ꢁ= 100V
Markinꢃ:
Capacitance, tolerance, D.C. rated voltage.
I = 250V M = 400V P= 630V
Pitch: D = 7.5 mm
Digits 7 - 8 - 9 indicate the first three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Cꢁimatic catꢂꢃorꢀ: 55/105/56 IꢁC 60068-1
Opꢂratinꢃ tꢂmpꢂratꢄrꢂ ranꢃꢂ: -55 to +105°C
For stacked technology an upper operating
temperature of +125°C is allowed for a max operating
time of 1000 h.
Digit 5
Digit 6 to 9
Rꢂꢁatꢂd docꢄmꢂnts: IꢁC 60384-2
Digit 10 to 11 Mechanical version and/or packaging (table1)
Digit 12
Identifies the dimensions and electrical
characteristics.
Windinꢃ scꢅꢂmꢂ
Digit 13
Digit 14
Internal use
Capacitance tolerance:
J=5%; K=10%; M=20%.
Table 1 (for more detailed information, please refer to page 14).
single sided metallized
polyester film
Standard
packaꢃinꢃ stꢀꢁꢂ
lꢂad
ꢁꢂnꢃtꢅ
Tapinꢃ
stꢀꢁꢂ
Ordꢂrinꢃ
codꢂ
(mm)
Figure No.
(Digit 10 to 11)
1
2
DQ
28
AMMꢀ-PACK
AMMꢀ-PACK
Reel Ø 355 mm
1
CK
Loose, short leads
Loose, long leads
4 +2
17+1/-2
AA
Z3
09/2008
36
Not for new design. Use new F611-F612 Series.
R66
MKT Series
MeTAllIZeD POlyeSTeR FIlM CAPACITOR
D.C. MulTIPuRPOSe APPlICATIONS
p = 7.5 mm
PRꢀDUCT CꢀDꢁ: R66
STACKeD VeRSION
Ratꢂd
Cap.
50Vdc/30Vac
Std dimensions
Max
dv/dt
Max K0
Part Nꢄmbꢂr
Ratꢂd
Cap.
250Vdc/160Vac
Std dimensions
Max
dv/dt
Max K0
Part Nꢄmbꢂr
B
H
L
p
(V/ µs)
(V2/ µs)
B
H
L
p
(V/ µs)
200
200
200
200
200
200
200
200
(V2/ µs)
100 ꢁ3
100 ꢁ3
100 ꢁ3
100 ꢁ3
100 ꢁ3
100 ꢁ3
100 ꢁ3
100 ꢁ3
0.022µF
0.033µF
0.047µF
0.068µF
0.10 µF
0.15 µF
0.22 µF
0.33 µF
3.0 8.0 10.0 7.5
3.0 8.0 10.0 7.5
3.0 8.0 10.0 7.5
3.0 8.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
5.0 10.5 10.0 7.5
6.0 12.0 10.5 7.5
0.68 µF
1.0 µF
1.5 µF
2.2 µF
4.7 µF
3.0
3.0
4.0
8.0 10.0 7.5
8.0 10.0 7.5
9.0 10.0 7.5
100
100
100
100
100
10 ꢁ3
10 ꢁ3
10 ꢁ3
10 ꢁ3
10 ꢁ3
R66CD3680--6--
R66CD4100--6--
R66CD4150--6--
R66CD4220--6--
R66CD4470--6--
R66ID 2220--7--
R66ID 2330--7--
R66ID 2470--7--
R66ID 2680--6--
R66ID 3100--7--
R66ID 3150--7--
R66ID 3220--7--
R66ID 3330--6--
5.0 10.5 10.0 7.5
6.0 12.0 10.5 7.5
Ratꢂd
Cap.
63Vdc/40Vac
Std dimensions
Max
dv/dt
Max K0
Part Nꢄmbꢂr
B
H
L
p
(V/ µs)
120
120
120
120
120
120
120
(V2/ µs)
15 ꢁ3
15 ꢁ3
15 ꢁ3
15 ꢁ3
15 ꢁ3
15 ꢁ3
15 ꢁ3
0.33 µF
0.47 µF
0.68 µF
1.0 µF
1.5 µF
2.2 µF
3.3 µF
3.0 8.0 10.0 7.5
3.0 8.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
5.0 10.5 10.0 7.5
6.0 12.0 10.5 7.5
6.0 12.0 10.5 7.5
R66DD3330--7--
R66DD3470--6--
R66DD3680--7--
R66DD4100--7--
R66DD4150--7--
R66DD4220--6--
R66DD4330--6--
Ratꢂd
Cap.
400Vdc/200Vac
Std dimensions
Max
dv/dt
Max K0
Part Nꢄmbꢂr
B
H
L
p
(V/µs)
275
275
275
275
275
275
275
275
275
(V2/µs)
220 ꢁ3
220 ꢁ3
220 ꢁ3
220 ꢁ3
220 ꢁ3
220 ꢁ3
220 ꢁ3
220 ꢁ3
220 ꢁ3
6800 pF 3.0 8.0 10.0 7.5
0.010µF 3.0 8.0 10.0 7.5
0.015µF 3.0 8.0 10.0 7.5
0.022µF 3.0 8.0 10.0 7.5
0.033µF 4.0 9.0 10.0 7.5
0.047µF 4.0 9.0 10.0 7.5
0.068µF 5.0 10.5 10.0 7.5
0.10 µF 6.0 12.0 10.5 7.5
0.15 µF 6.0 12.0 10.5 7.5
R66MD1680--7--
R66MD2100--7--
R66MD2150--7--
R66MD2220--6--
R66MD2330--7--
R66MD2470--7--
R66MD2680--7--
R66MD3100--6--
R66MD3150--6--
Ratꢂd
Cap.
100Vdc/63Vac
Std dimensions
Max
dv/dt
Max K0
Part Nꢄmbꢂr
B
H
L
p
(V/ µs)
150
150
150
150
150
150
150
150
150
(V2/ µs)
30 ꢁ3
30 ꢁ3
30 ꢁ3
30 ꢁ3
30 ꢁ3
30 ꢁ3
30 ꢁ3
30 ꢁ3
30 ꢁ3
0.068µF
0.10 µF
0.15 µF
0.22 µF
0.33 µF
0.47 µF
0.68 µF
1.0 µF
1.5 µF
3.0 8.0 10.0 7.5
3.0 8.0 10.0 7.5
3.0 8.0 10.0 7.5
3.0 8.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
4.0 9.0 10.0 7.5
5.0 10.5 10.0 7.5
6.0 12.0 10.5 7.5
R66ꢁD2680--7--
R66ꢁD3100--7--
R66ꢁD3150--7--
R66ꢁD3220--7--
R66ꢁD3330--7--
R66ꢁD3470--7--
R66ꢁD3680--7--
R66ꢁD4100--7--
R66ꢁD4150--6--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
a) WOuND vꢂrsion
b) STACKeD vꢂrsion
Ratꢂd
Cap.
630Vdc/220Vac*
Std dimensions
Max
dv/dt
Max K0
Part Nꢄmbꢂr
B
H
L
p
(V/µs)
40
(V2/µs)
50 ꢁ3
a) 1000 pF 3.0 8.0 10.0 7.5
a) 1500 pF 3.0 8.0 10.0 7.5
a) 2200 pF 3.0 8.0 10.0 7.5
a) 3300 pF 3.0 8.0 10.0 7.5
a) 4700 pF 3.0 8.0 10.0 7.5
a) 6800 pF 4.0 9.0 10.0 7.5
b) 0.010µF 4.0 9.0 10.0 7.5
b) 0.015µF 4.0 9.0 10.0 7.5
b) 0.022µF 5.0 10.5 10.0 7.5
b) 0.033µF 6.0 12.0 10.5 7.5
b) 0.047µF 6.0 12.0 10.5 7.5
R66PD1100--1--
R66PD1150--1--
R66PD1220--1--
R66PD1330--1--
R66PD1470--1--
R66PD1680--1--
R66PD2100--7--
R66PD2150--7--
R66PD2220--7--
R66PD2330--6--
R66PD2470--6--
40
50 ꢁ3
40
50 ꢁ3
40
50 ꢁ3
40
50 ꢁ3
40
50 ꢁ3
300
300
300
300
300
378 ꢁ3
378 ꢁ3
378 ꢁ3
378 ꢁ3
378 ꢁ3
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the
maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in
the above table.
*Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).
09/2008
37
Not for new design. Use new F611-F612 Series.
R66
MKT Series
MeTAllIZeD POlyeSTeR FIlM CAPACITOR
D.C. MulTIPuRPOSe APPlICATIONS
p = 7.5 mm
PRꢀDUCT CꢀDꢁ: R66
eleCTRICAl ChARACTeRISTICS
TeST MeThOD AND PeRFORMANCe
Ratꢂd voꢁtaꢃꢂ (VR):
Damp ꢅꢂat, stꢂadꢀ statꢂ:
Tꢂst conditions
50 Vdc
63 Vdc 100 Vdc
250 Vdc 400 Vdc 630 Vdc
Temperature:
+40°C ±2°C
93% ±2%
56 days
Ratꢂd tꢂmpꢂratꢄrꢂ (TR): +85°C
Relative humidity (RH):
Test duration:
Tꢂmpꢂratꢄrꢂ dꢂratꢂd voꢁtaꢃꢂ:
for temperatures between +85°C and the upper operating
temperature ( +105°C for wound technology and +125°C
for stacked technology) a decreasing factor of 1.25% per
degree °C on the rated voltage VR (d.c. and a.c.) has to be
applied.
Pꢂrformancꢂ
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ):
Insulation resistance:
≤50x10-4 at 1kHz
≥50% of initial limit.
endꢄrancꢂ:
Capacitancꢂ ranꢃꢂ: 1000 pF to 4.7 µF
Tꢂst conditions
Temperature:
Test duration:
Voltage applied:
Pꢂrformancꢂ
Capacitancꢂ vaꢁꢄꢂs:
+105°C ±2°C
2000 h
1.25xVC
ꢁ6 series (IꢁC 60063 Norm).
Capacitancꢂ toꢁꢂrancꢂs (measured at 1 kHz):
± 5% (J); ±10% (K); ±20% (M).
Totaꢁ sꢂꢁf-indꢄctancꢂ (L): ≈8nH
(lead length ~2mm)
Capacitance change |∆C/C|: ≤5%
DF change (∆tgδ):
Insulation resistance:
≤50 10-4 at 10kHz
Dissipation factor (DF):
tgd 10-4. at +25°C ”5°C
≥50% of initial limit.
Rꢂsistancꢂ to soꢁdꢂrinꢃ ꢅꢂat:
tgδ x 10-4
Tꢂst conditions
kHz
Solder bath temperature:
+260°C±5°C
1
10
≤ 100
≤ 150
Dipping time (with heat screen):10 s ±1 s
Pꢂrformancꢂ
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ):
Insꢄꢁation rꢂsistancꢂ:
Tꢂst conditions
≤50x10-4 at 10kHz
≥ initial limit.
Insulation resistance:
Temperature
+25°C±5°C
Voltage charge time:
Voltage charge:
1 min
lonꢃ tꢂrm stabiꢁitꢀ (after two years):
Storaꢃꢂ
50 Vdc for VR <100 Vdc
100 Vdc for VR ≥100 Vdc
standard environmental conditions (see page 12).
Pꢂrformancꢂ
Pꢂrformancꢂ
For VR ≤100 Vdc
Capacitance change |∆C/C|:
≤3% for C≤0.1µF
≤2% for C>0.1µF
≥3750 MΩ for C ≤0.33µF (5000 MΩ)*
≥1250 s for C >0.33µF (5000 s)*
For VR >100 Vdc
≥30000MΩ (50000 MΩ)*
*Typical value
RelIABIlITy
Reference MIL HDB 217
Appꢁication conditions:
Temperature:
Tꢂst voꢁtaꢃꢂ bꢂtwꢂꢂn tꢂrminaꢁs:
+40°C±2°C
0.5xVR
1.6xVR applied for 2 s at +25°C ± 5°C
Voltage:
Failure rate:
≤2 FIT
(1 FIT = 1 10-9 failures/components h)
Faiꢁꢄrꢂ critꢂria:
(according to DIN 44122)
Short or open circuit
Capacitance change |∆C/C|:
DF change (∆tgδ):
Insulation resistance:
>10%
>2 x initial limit.
<0.005 x initial limit.
09/2008
38
Not for new design. Use new F611-F612 Series.
R66
MKT Series
MeTAllIZeD POlyeSTeR FIlM CAPACITOR
D.C. MulTIPuRPOSe APPlICATIONS
p = 7.5 mm
PRꢀDUCT CꢀDꢁ: R66
MAX. VꢀLTAGꢁ (Vr.m.s.) VꢁRSUS FRꢁQUꢁNCY (sinusoidal wave-form / Th ≤ 40°C)
Note: p (pitch) in mm.
09/2008
39
Not for new design. Use new F611-F612 Series.
R66
MKT Series
MeTAllIZeD POlyeSTeR FIlM CAPACITOR
D.C. MulTIPuRPOSe APPlICATIONS
p = 7.5 mm
PRꢀDUCT CꢀDꢁ: R66
MAX. CURRꢁNT (Ir.m.s.) VꢁRSUS FRꢁQUꢁNCY (sinusoidal wave-form / Th ≤ 40°C)
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale,
o=KEMET Corporation,
ou=Marketing Communications,
cn=Marcy Brand,
email=marcybrand@kemet.com
Date: 2012.07.18 12:11:04 -04'00'
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Note: p (pitch) in mm.
09/2008
40
相关型号:
R66ED4150286-K
Film Capacitor, Polyester, 100V, 10% +Tol, 10% -Tol, 1.5uF, Through Hole Mount, RADIAL LEADED
KEMET
R66ED4150286-M
Film Capacitor, Polyester, 100V, 20% +Tol, 20% -Tol, 1.5uF, Through Hole Mount, RADIAL LEADED
KEMET
R66ED4150286J
CAPACITOR, METALLIZED FILM, POLYESTER, 100 V, 1.5 uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
R66ED4150286K
CAPACITOR, METALLIZED FILM, POLYESTER, 100 V, 1.5 uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
R66ED4150286M
CAPACITOR, METALLIZED FILM, POLYESTER, 100 V, 1.5 uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
R66ID2220287M
CAPACITOR, METALLIZED FILM, POLYESTER, 250 V, 0.022 uF, THROUGH HOLE MOUNT, RADIAL LEADED
KEMET
R66ID2220AA0-K
Film Capacitor, Polyester, 250V, 10% +Tol, 10% -Tol, 0.022uF, Through Hole Mount, RADIAL LEADED
KEMET
R66ID2330CK6-K
Film Capacitor, Polyester, 250V, 10% +Tol, 10% -Tol, 0.033uF, Through Hole Mount, RADIAL LEADED
KEMET
R66ID2470DQ7AJ
Film Capacitor, Polyester, 250V, 5% +Tol, 5% -Tol, 400ppm/Cel TC, 0.047uF, Through Hole Mount, 3912, RADIAL LEADED, ROHS COMPLIANT
KEMET
©2020 ICPDF网 联系我们和版权申明