R79IC2560AA4-K [KEMET]
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.056uF, Through Hole Mount, RADIAL LEADED;型号: | R79IC2560AA4-K |
厂家: | KEMET CORPORATION |
描述: | Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.056uF, Through Hole Mount, RADIAL LEADED 电容器 |
文件: | 总5页 (文件大小:467K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Not for new design. Use new F461-F464 Series.
R79
Looꢀe
Taped
MKP serieꢀ
MeTAllIZeD POlyPROPylene FIlM CAPACITOR
MUlTIPURPOSe APPlICATIOnS
Tꢀpicaꢁ appꢁicatioꢂs: timing, oꢀcillator circuitꢀ, high
frequency coupling and decoupling.
PRꢁDUCT CꢁDꢂ: R79
p = 5mm
All dimenꢀionꢀ are in mm.
Pitch Box thickneꢀꢀ
Maximum dimenꢀionꢀ (mm)
(mm)
(mm)
<4.5
≥4.5
B max
H max
L max
5.0
5.0
B +0.1
B +0.1
H +0.1
H +0.1
L +0.2
L +0.3
PRODUCT CODe SySTeM
geneRAl TeCHnICAl DATA
The part number, compriꢀing 14 digitꢀ, iꢀ formed aꢀ followꢀ:
Diꢃꢁꢃctric: polypropylene film.
Pꢁatꢃs:
aluminium layer depoꢀited by evaporation under
vacuum.
1
2
3
4
5
6
7
8
9
10 11 12 13 14
-
R 7 9
C
Wiꢂdiꢂꢄ: non-inductive type.
lꢃads:
tinned wire, low thermical conductivity.
Digit 1 to 3
Digit 4
serieꢀ code
d.c. rated voltage:
Protꢃctioꢂ:plastic case, thermosetting resin filled.
Box material is solvent resistant and flame
retardant according to UL94.
G = 160V
M = 400V
I = 250V
P = 630V
Markiꢂꢄ: manufacturer’ꢀ logo, ꢀerieꢀ (R79), capacitance,
tolerance, D.C. rated voltage.
Digit 5
Pitch: C = 5mm
Cꢁimatic catꢃꢄorꢀ: 55/105/56 IꢂC 60068-1
Opꢃratiꢂꢄ tꢃmpꢃraturꢃ raꢂꢄꢃ: -55 to +105°C
Rꢃꢁatꢃd documꢃꢂts: IꢂC 60384-16
Digit 6 to 9
Digits 7 - 8 - 9 indicate the first three digits of
Capacitance value and the 6th digit indicateꢀ
the number of zeroꢀ that muꢀt be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical verꢀion and packaging (table 1)
Wiꢂdiꢂꢄ schꢃmꢃ
Digit 12
Identifies the dimensions and electrical
characteriꢀticꢀ.
Digit 13
Digit 14
Internal uꢀe.
Capacitance tolerance:
H=2.5%; J=5%; K=10%
ꢀingle ꢀided metallized
polypropylene film
Table 1 (for more detailed information, pleaꢀe refer to page 14)
Staꢂdard
lꢃad ꢁꢃꢂꢄth
Ordꢃriꢂꢄ codꢃ
packaꢄiꢂꢄ stꢀꢁꢃ
(mm)
(Digit 10 to 11)
AMMꢁ-PACK
DQ
CK
RꢂꢂL Ø 355mm
Looꢀe, ꢀhort leadꢀ
Looꢀe, long leadꢀ 17 +1/-2
4 +1.5
AA
Z3
Note: Ammo-pack iꢀ the preferred packaging for taped verꢀion.
09/2008
134
Not for new design. Use new F461-F464 Series.
R79
MKP serieꢀ
MeTAllIZeD POlyPROPylene FIlM CAPACITOR
MUlTIPURPOSe APPlICATIOnS
p = 5 mm
PRꢁDUCT CꢁDꢂ: R79
Ratꢃd
Cap.
Max
dv/dt
Ratꢃd
Cap.
Max
dv/dt
400Vdc/200Vac
td dimenꢀionꢀ
160Vdc/70Vac
std dimenꢀionꢀ
Max K0
Part numbꢃr
Max K0
Part numbꢃr
s
B
H
L
p
(V/µꢀ)
400
400
400
400
400
400
400
400
400
400
400
400
400
400
(V2/µꢀ)
B
H
L
p
(V/µꢀ)
100
100
100
100
100
100
100
100
100
100
(V2/µꢀ)
3900 pF
4700 pF
5600 pF
6800 pF
8200 pF
0.010 µF
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
4.5 9.5 7.2 5.0
4.5 9.5 7.2 5.0
5.0 10.0 7.2 5.0
5.0 10.0 7.2 5.0
6.0 11.0 7.2 5.0
6.0 11.0 7.2 5.0
7.2 13.0 7.2 5.0
7.2 13.0 7.2 5.0
320 ꢂ3 R79MC1390--4--
320 ꢂ3 R79MC1470--4--
320 ꢂ3 R79MC1560--4--
320 ꢂ3 R79MC1680--4--
320 ꢂ3 R79MC1820--4--
320 ꢂ3 R79MC2100--4--
320 ꢂ3 R79MC2120--4--
320 ꢂ3 R79MC2150--4--
320 ꢂ3 R79MC2180--4--
320 ꢂ3 R79MC2220--4--
320 ꢂ3 R79MC2270--4--
320 ꢂ3 R79MC2330--4--
320 ꢂ3 R79MC2390--4--
320 ꢂ3 R79MC2470--4--
0.039 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.10 µF
0.12 µF
0.15 µF
0.18 µF
0.22 µF
3.5 7.5 7.2 5.0
4.5 9.5 7.2 5.0
4.5 9.5 7.2 5.0
4.5 9.5 7.2 5.0
5.0 10.0 7.2 5.0
5.0 10.0 7.2 5.0
6.0 11.0 7.2 5.0
6.0 11.0 7.2 5.0
7.2 13.0 7.2 5.0
7.2 13.0 7.2 5.0
32 ꢂ3 R79GC2390--4--
32 ꢂ3 R79GC2470--4--
32 ꢂ3 R79GC2560--4--
32 ꢂ3 R79GC2680--4--
32 ꢂ3 R79GC2820--4--
32 ꢂ3 R79GC3100--4--
32 ꢂ3 R79GC3120--4--
32 ꢂ3 R79GC3150--4--
32 ꢂ3 R79GC3180--4--
32 ꢂ3 R79GC3220--4--
Mechanical verꢀion and packaging (Table1)
Internal uꢀe
Tolerance: J (±5%); K (±10%)
Ratꢃd
Cap.
Max
dv/dt
630Vdc/220Vac*
Max K0
Part numbꢃr
s
td dimenꢀionꢀ
Ratꢃd
Cap.
Max
dv/dt
250Vdc/160Vac
td dimenꢀionꢀ
Max K0
Part numbꢃr
B
H
L
p
(V/µꢀ)
500
500
500
500
500
500
500
600
600
600
600
600
600
600
600
600
(V2/µꢀ)
s
1000 pF
1200 pF
1500 pF
1800 pF
2200 pF
2700 pF
3300 pF
3900 pF
4700 pF
5600 pF
6800 pF
8200 pF
0.010 µF
0.012 µF
0.015 µF
0.018 µF
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
4.5 9.5 7.2 5.0
4.5 9.5 7.2 5.0
4.5 9.5 7.2 5.0
5.0 10.0 7.2 5.0
5.0 10.0 7.2 5.0
6.0 11.0 7.2 5.0
6.0 11.0 7.2 5.0
7.2 13.0 7.2 5.0
7.2 13.0 7.2 5.0
630 ꢂ3 R79PC1100--4--
630 ꢂ3 R79PC1120--4--
630 ꢂ3 R79PC1150--4--
630 ꢂ3 R79PC1180--4--
630 ꢂ3 R79PC1220--4--
630 ꢂ3 R79PC1270--4--
630 ꢂ3 R79PC1330--4--
630 ꢂ3 R79PC1390--4--
630 ꢂ3 R79PC1470--4--
630 ꢂ3 R79PC1560--4--
630 ꢂ3 R79PC1680--4--
630 ꢂ3 R79PC1820--4--
630 ꢂ3 R79PC2100--4--
630 ꢂ3 R79PC2120--4--
630 ꢂ3 R79PC2150--4--
630 ꢂ3 R79PC2180--4--
B
H
L
p
(V/µꢀ)
250
250
250
250
250
250
250
250
250
250
250
250
250
250
(V2/µꢀ)
0.012 µF
0.015 µF
0.018 µF
0.022 µF
0.027 µF
0.033 µF
0.039 µF
0.047 µF
0.056 µF
0.068 µF
0.082 µF
0.10 µF
0.12 µF
0.15 µF
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
3.5 7.5 7.2 5.0
4.5 9.5 7.2 5.0
4.5 9.5 7.2 5.0
4.5 9.5 7.2 5.0
5.0 10.0 7.2 5.0
6.0 11.0 7.2 5.0
6.0 11.0 7.2 5.0
7.2 13.0 7.2 5.0
7.2 13.0 7.2 5.0
125 ꢂ3 R79IC2120--4--
125 ꢂ3 R79IC2150 --4--
125 ꢂ3 R79IC2180 --4--
125 ꢂ3 R79IC2220 --4--
125 ꢂ3 R79IC2270 --4--
125 ꢂ3 R79IC2330 --4--
125 ꢂ3 R79IC2390 --4--
125 ꢂ3 R79IC2470 --4--
125 ꢂ3 R79IC2560 --4--
125 ꢂ3 R79IC2680 --4--
125 ꢂ3 R79IC2820 --4--
125 ꢂ3 R79IC3100 --4--
125 ꢂ3 R79IC3120 --4--
125 ꢂ3 R79IC3150 --4--
Mechanical verꢀion and packaging (Table1)
Internal uꢀe
Tolerance: H (±2.5%); J (±5%); K (±10%)
Mechanical verꢀion and packaging (Table1)
Internal uꢀe
Tolerance: H (±2.5%); J (±5%); K (±10%)
All dimenꢀionꢀ are in mm.
Note: If the working voltage (V) iꢀ lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In thiꢀ caꢀe the
maximum value allowed iꢀ obtained multiplying the above value (ꢀee table dv/dt) with the ratio VR /V.
The pulꢀe characteriꢀtic K0 dependꢀ on the voltage wave-form and in any caꢀe it cannot overcome the value given in
the above table. The dv/dt teꢀt iꢀ carried out at 2 timeꢀ the above valueꢀ.
*Not ꢀuitable for acroꢀꢀ-the-line applicationꢀ. Pleaꢀe refer to Interference suppreꢀꢀion Capacitorꢀ (page 145).
09/2008
135
Not for new design. Use new F461-F464 Series.
R79
MKP serieꢀ
MeTAllIZeD POlyPROPylene FIlM CAPACITOR
MUlTIPURPOSe APPlICATIOnS
p = 5 mm
PRꢁDUCT CꢁDꢂ: R79
eleCTRICAl CHARACTeRISTICS
TeST MeTHOD AnD PeRFORMAnCe
Ratꢃd voꢁtaꢄꢃ (VR): 160Vdc - 250 Vdc 400 Vdc - 630 Vdc Damp hꢃat, stꢃadꢀ statꢃ:
Tꢃst coꢂditioꢂs
Temperature:
+40°C±2°C
93%±2%
56 dayꢀ
Ratꢃd tꢃmpꢃraturꢃ (TR): +85°C
Relative humidity (RH):
Teꢀt duration:
Tꢃmpꢃraturꢃ dꢃratꢃd voꢁtaꢄꢃ:
for temperatureꢀ between +85°C and +105°C a
decreaꢀing factor of 1.25% per degree C on the rated
voltage VR (d.c. and a.c.) haꢀ to be applied.
Pꢃrformaꢂcꢃ
Capacitance change |∆C/C |: ≤3%
DF change (∆tgδ):
≤10x10-4 at 1kHz
Inꢀulation reꢀiꢀtance:
≥50% of initial limit.
Capacitaꢂcꢃ raꢂꢄꢃ:
Capacitaꢂcꢃ vaꢁuꢃs:
ꢂ12 ꢀerieꢀ (IꢂC 60063 Norm).
1000pF to 0.22 µF
ꢂndurance:
Tꢃst coꢂditioꢂs
Temperature:
Teꢀt duration:
Voltage applied:
Performance
Capacitaꢂcꢃ toꢁꢃraꢂcꢃs (meaꢀured at 1 kHz):
±2.5% (H); ±5% (J); ±10% (K).
+85°C±2°C
1000 h
1.25xVR
Totaꢁ sꢃꢁf-iꢂductaꢂcꢃ (L): ≈ 6 nH
(lead length ≈2 mm).
Capacitance change |∆C/C |:≤3%
Temperature coefficient (ppm/°C):
-200 (typical value).
DF change (∆tgδ):
≤10x10-4 at 10kHz
Inꢀulation reꢀiꢀtance:
≥50% of initial limit.
Dissipatioꢂ factor (DF):
tgd 10-4 at +25°C ±5°C
Reꢀiꢀtance to ꢀoldering heat:
Tꢃst coꢂditioꢂs
kHz
MKP C≤0.1 µF
tgδx10-4
≤060
MKP C>0.1 µF
tgδx10-4
≤060
solder bath temperature:
+260°C±5°C
001
Dipping time (with heat ꢀcreen):10 ꢀ±1 ꢀ
Pꢃrformaꢂcꢃ
010
100
≤10
≤30
≤10
Capacitance change |∆C/C |:≤2%
DF change (∆tgδ):
≤10x10-4 at 10kHz
Diꢃꢁꢃctric absorptioꢂ (DA): 0.05%
Inꢀulation reꢀiꢀtance:
≥ initial limit.
Iꢂsuꢁatioꢂ rꢃsistaꢂcꢃ:
Tꢃst coꢂditioꢂs
loꢂꢄ tꢃrm stabiꢁitꢀ (after two yearꢀ):
Storaꢄꢃ: ꢀtandard environmental conditionꢀ (ꢀee page 12).
Pꢃrformaꢂcꢃ
Temperature:
+25°C±5°C
1 min
Voltage charge time:
Voltage charge:
Pꢃrformaꢂcꢃ
100Vdc
Capacitance change |∆C/C |:≤0.5%
≥1x105 MΩ (Typ.value: 5x105 MΩ)
Tꢃst voꢁtaꢄꢃ bꢃtwꢃꢃꢂ tꢃrmiꢂatioꢂs:
1.6xVR applied for 2 ꢀ at +25°C±5°C.
09/2008
136
Not for new design. Use new F461-F464 Series.
R79
MKP serieꢀ
MeTAllIZeD POlyPROPylene FIlM CAPACITOR
MUlTIPURPOSe APPlICATIOnS
p = 5 mm
PRꢁDUCT CꢁDꢂ: R79
MAX. VꢁLTAGꢂ (Vr.m.ꢀ.) VꢂRsUs FRꢂQUꢂNCY (ꢀinuꢀoidal wave-form / Th ≤ 40°C)
Note: p (pitch) in mm.
09/2008
137
Not for new design. Use new F461-F464 Series.
R79
MKP serieꢀ
MeTAllIZeD POlyPROPylene FIlM CAPACITOR
MUlTIPURPOSe APPlICATIOnS
p = 5 mm
PRꢁDUCT CꢁDꢂ: R79
MAX. CURRꢂNT (Ir.m.ꢀ.) VꢂRsUs FRꢂQUꢂNCY (ꢀinuꢀoidal wave-form / Th ≤ 40°C)
Note: p (pitch) in mm.
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand, email=marcybrand@kemet.com
Date: 2012.07.18 12:12:33 -04'00'
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
09/2008
138
相关型号:
R79IC2560AA40H
Film Capacitor, Polypropylene, 250V, 2.5% +Tol, 2.5% -Tol, 0.056uF, Through Hole Mount, 2818, RADIAL LEADED
KEMET
R79IC2560AA40J
Film Capacitor, Polypropylene, 250V, 5% +Tol, 5% -Tol, 0.056uF, Through Hole Mount, 2818, RADIAL LEADED
KEMET
R79IC2560AA40K
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.056uF, Through Hole Mount, 2818, RADIAL LEADED
KEMET
R79MC1390AA40H
Film Capacitor, Polypropylene, 400V, 2.5% +Tol, 2.5% -Tol, 0.0039uF, Through Hole Mount, 2814, RADIAL LEADED
KEMET
R79MC1390AA40J
Film Capacitor, Polypropylene, 400V, 5% +Tol, 5% -Tol, 0.0039uF, Through Hole Mount, 2814, RADIAL LEADED
KEMET
R79MC1390AA40K
Film Capacitor, Polypropylene, 400V, 10% +Tol, 10% -Tol, 0.0039uF, Through Hole Mount, 2814, RADIAL LEADED
KEMET
R79MC1560AA40H
Film Capacitor, Polypropylene, 400V, 2.5% +Tol, 2.5% -Tol, 0.0056uF, Through Hole Mount, 2814, RADIAL LEADED
KEMET
R79MC2120AA40H
Film Capacitor, Polypropylene, 400V, 2.5% +Tol, 2.5% -Tol, 0.012uF, Through Hole Mount, 2818, RADIAL LEADED
KEMET
R79MC2120AA40J
Film Capacitor, Polypropylene, 400V, 5% +Tol, 5% -Tol, 0.012uF, Through Hole Mount, 2818, RADIAL LEADED
KEMET
R79MC2120AA40K
Film Capacitor, Polypropylene, 400V, 10% +Tol, 10% -Tol, 0.012uF, Through Hole Mount, 2818, RADIAL LEADED
KEMET
R79MC2120CK40H
Film Capacitor, Polypropylene, 400V, 2.5% +Tol, 2.5% -Tol, 0.012uF, Through Hole Mount, 2818, RADIAL LEADED
KEMET
R79MC2120CK40K
Film Capacitor, Polypropylene, 400V, 10% +Tol, 10% -Tol, 0.012uF, Through Hole Mount, 2818, RADIAL LEADED
KEMET
©2020 ICPDF网 联系我们和版权申明