首页 |元器件品牌

T363L105K035A [KEMET]

TANTALUM DIPPED / RADIAL - POLAR; 钽DIPPED / RADIAL - POLAR
T363L105K035A
型号： T363L105K035A
厂家： KEMET CORPORATION    KEMET CORPORATION
描述：

TANTALUM DIPPED / RADIAL - POLAR
钽DIPPED / RADIAL - POLAR
文件： 总10页 (文件大小：138K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
TANTALUM DIPPED / RADIAL — POLAR  
PERFORMANCE CHARACTERISTICS  
• CAPACITANCE/VOLTAGE RANGE:  
T35X/T39X: 0.1-680µF, 3-50 Volts.  
T36X: 0.1-330µF, 6-50 Volts.  
• AC RIPPLE VOLTAGE: Permissible AC ripple volt-  
age is related to equivalent series resistance  
(ESR) and power dissipation capability. Maximum  
power dissipation for each case size is listed in  
Table below. For additional description see page  
78.  
• CAPACITANCE TOLERANCE: Available in stan-  
dard EIA nominal values with ±20% and ±10%  
standard.  
Case  
Size  
Power Dissipation  
(max.) @ 25°C (watts)  
• DISSIPATION FACTOR: Maximum DF limits are  
shown in corresponding series part number list-  
ings. See Application Notes Section, page 76 for  
additional information.  
T35X, A  
T39X B  
.040  
.050  
.060  
.065  
.070  
.080  
.090  
.100  
.110  
.120  
.130  
.140  
C
D
E
F
G
H
J
K
L
M
• DC LEAKAGE CURRENT: Maximum leakage val-  
ues at 25° are shown in part number listings,  
pages 63-65, 67, 68 and 70. See Application  
Notes Section, pages 76 & 77 for additional infor-  
mation.  
•
RATED VOLTAGE; WORKING VOLTAGE; SURGE  
VOLTAGE; REVERSE VOLTAGE: See Application  
Notes Section, pages 76 & 77 for description.  
T36X A  
.050  
.075  
.090  
.135  
B
C
D
Maximum Power Dissipation Capability @ 25°C  
• IMPEDANCE and ESR: See Application Notes  
Section, page 77 & 78 for description. Reference  
ESR values are shown in table below.  
• ENVIRONMENTAL CONSIDERATIONS:  
A. Shock Test: MIL-STD-202, Method 213.  
B. Thermal Shock, MIL-STD-202, Method 107,  
Condition A.  
C. Moisture Resistance: MIL-STD-202,  
Method 106.  
D. Solderability: MIL-STD-202, Method 208.  
For additional Environmental Test Information  
see pages 80, 81 and 82.  
Commercial T35X/T36X/T39X ESR (OHMS) at 100 kHz @ +25°C  
(The ESR values provided below are for reference only. No warranty, as  
stated on page 3 and reincorporated here, is made as to the accuracy  
of these values for any particular T35X, T36X, T39X Series product.)  
Cap.  
µF  
6
10  
16  
20  
25  
35  
50  
Volt  
Volt Volt Volt Volt Volt Volt  
0.10  
0.15  
0.22  
0.33  
0.47  
0.68  
1.00  
1.50  
2.20  
26.0  
21.0  
17.0  
15.0  
13.0  
10.0  
8.0  
6.0  
5.0  
4.0  
3.0  
2.5  
2.0  
1.6  
1.3  
1.0  
0.8  
26.0  
21.0  
17.0  
15.0  
13.0  
10.0  
8.0  
• LEAD MATERIAL: Solder coated steel core with  
copper ply per MIL-STD-127.  
10.0 10.0  
10.0  
9.0  
7.0  
5.5  
4.5  
3.6  
2.9  
2.3  
1.8  
1.4  
1.2  
0.9  
0.6  
8.0  
6.0  
5.0  
4.0  
3.1  
2.5  
2.0  
1.5  
1.2  
1.0  
0.8  
5.0  
13.0 8.0  
3.5  
• LEAD TAPE and REEL: Reeling per specification  
RS-468. See pages 72 - 74 for additional informa-  
tion.  
3.30 13.0 10.0 6.0  
3.0  
4.70 10.0  
8.0 5.0  
6.0 4.0  
5.0 3.2  
3.7 2.5  
2.7 2.0  
2.1 1.6  
1.7 1.3  
1.3 1.0  
1.0 0.8  
0.8 0.6  
0.6  
2.5  
6.80  
10.0  
8.0  
6.0  
5.0  
3.7  
3.0  
2.0  
1.8  
1.6  
0.9  
0.9  
0.7  
2.0  
1.6  
15.0  
1.2  
22.0  
1.0  
33.0  
47.0  
68.0  
100.0  
150.0  
220.0  
330.0  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  
61  
TANTALUM DIPPED / RADIAL - POLAR  
T350, T351, T352, T353, T354, T355 & T356 SERIES “ULTRADIP II”  
The KEMET ‘UltraDip II’ Capacitors offer the designer of quality  
The plastic case provides a tough barrier coating and maintains pre-  
cision of lead wire spacing within ±0.015 inch. The gold color epoxy  
utilized permits Laser marking with outstanding permanency and  
legibility. All case sizes are printed with capacitance, voltage, polar-  
ity and vendor identification.  
instruments and entertainment systems the widely recognized  
advantages inherent in solid tantalum capacitors at competitive  
prices.  
The ‘UltraDip II’ Series, miniature dipped solid tantalum capacitors,  
provide the designer with the advantage of compactness plus low  
leakage and low DF performance characteristics for filtering,  
bypassing, coupling, blocking and RC timing circuits. This series fea-  
tures a capacitance range from 0.1 to 680 microfarads at voltages  
from 3 to 50 VDC. ‘UltraDip II’ capacitors utilize the same sophisti-  
cated materials and processes which have advanced KEMET  
Electronics Corporation to the leadership position in solid tantalum  
capacitors.  
Solid tantalum devices exhibit no degradation failure mode during  
shelf storage and show a constantly decreasing failure rate (i.e.,  
absence of wearout mechanism) during life tests.  
The ‘UltraDip II’ Series provides self-insulating cases which are  
resistant to shock and vibration. These capacitors exhibit low DCL,  
ESR and Impedance and have excellent temperature stability.  
CAPACITOR OUTLINE DRAWINGS  
T350  
T351  
T352  
T353  
T354  
T355  
T356  
.250±.025  
(6.35±.64)  
D
Max.  
D
Max.  
D
Max.  
D
Max.  
D
Max.  
D
Max.  
D
Max.  
H
Max.  
H
Max.  
H
Max.  
H
Max.  
H
Max.  
H
Max.  
H
Max.  
.187±.032  
(4.75±.81)  
.187±.032  
(4.75±.81)  
.187±.032  
(4.75±.81)  
.187±.032  
(4.75±.81)  
.187±.032  
(4.75±.81)  
.187±.032  
(4.75±.81)  
.50±.05  
.02  
(0.5)  
.02  
**.02  
(0.5)  
(0.5)  
.20  
(5.08)  
.20  
(5.08)  
.250  
(6.35)  
.10  
(2.54)  
.125  
(3.18)  
.20  
(5.08)  
Lead Spacing  
See Note 2  
*Lead Tolerance = ± .015 (± .38 mm)  
** All Lead Diameters = .02 ± .002 (0.5 ± .05 mm)  
DIMENSIONS — INCHES (MILLIMETERS)  
All  
D
T350  
T351  
T352  
T353  
T354  
T355  
T356  
(1)  
(1)  
(1)  
(1)  
(1)  
(1)  
Case  
Size  
H
H
H
H
H
H(1)  
H
Max Diameter  
.175 (4.5)  
.175 (4.5)  
.196 (5.0)  
.196 (5.0)  
.216 (5.5)  
.236 (6.0)  
.250 (6.3)  
.300 (7.6)  
.330 (8.4)  
.350 (8.9)  
.350 (8.9)  
.400 (10.2)  
Max Height  
.280 (7.1)  
.300 (7.6)  
.330 (8.4)  
.340 (8.6)  
.350 (8.9)  
.390 (9.9)  
.400 (10.2)  
.400 (10.2)  
.500 (12.7)  
.530 (13.5)  
.630 (16.0)  
.670 (17.0)  
Max Height  
.380 (9.6)  
.390 (9.9)  
.420 (10.7)  
.430 (10.9)  
.440 (11.2)  
.480 (12.2)  
.490 (12.4)  
.500 (12.7)  
Max Height  
.400 (10.2)  
.410 (10.4)  
.440 (11.2)  
.450 (11.4)  
.460 (11.7)  
.500 (12.7)  
.510 (13.0)  
.520 (13.2)  
Max Height  
.400 (10.2)  
.410 (10.4)  
.440 (11.2)  
.450 (11.4)  
.460 (11.7)  
.500 (12.7)  
.510 (13.0)  
.520 (13.2)  
.580 (14.7)  
.630 (16.0)  
.730 (18.5)  
.760 (19.3)  
Max Height  
.340 (8.6)  
.350 (8.9)  
.380 (9.6)  
.390 (9.9)  
.400 (10.2)  
.440 (11.2)  
.450 (11.4)  
.470 (11.9)  
.550 (14.0)  
.610 (15.5)  
.710 (18.1)  
.740 (18.8)  
Max Height  
Max Height  
A
B
.340 (8.6)  
.350 (8.9)  
.380 (9.6)  
.390 (9.9)  
.400 (10.2)  
.440 (11.2)  
.450 (11.4)  
.470 (11.9)  
.340 (8.6)  
.350 (8.9)  
.380 (9.6)  
.390 (9.9)  
.400 (10.2)  
.440 (11.2)  
.450 (11.4)  
.470 (11.9)  
.550 (14.0)  
.610 (15.5)  
.710 (18.1)  
.740 (18.8)  
C
D
E
F
G
H
J(2)  
K(2)  
L(2)  
M(2)  
Note 3  
Note 3  
Note 3  
NOTES: (1) All “H” Dimensions are from Capacitor seating plane to top of Capacitor.  
(2) On T350 Series, case sizes A-H are supplied with .100”(2.54) lead spacing—case sizes J-M are supplied with .200”(5.08) lead spacing.  
(3) These case sizes are not available for T351, T352 & T355 capacitors.  
LEAD CONFIGURATION & SPACING CHART  
LEAD  
CONFIGURATION  
.100  
SERIES  
CASE  
T350 T351 T352 T353 T354 T355 T356  
X
X
.125  
X
X
.200  
X
X
X
X
X
.250  
X
X
A-H  
STRAIGHT LEAD  
STAND OFF  
SNAP-IN  
.100  
X
X
X
X
.125  
.200  
X
X
X
X
.250  
X
X
J-M  
STRAIGHT LEAD  
STAND OFF  
SNAP-IN  
T350  
T351 T352  
T353  
T354  
T355  
T356  
X
62  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  
TANTALUM DIPPED / RADIAL - POLAR  
T350, T351, T352, T353, T354, T355 & T356 SERIES “ULTRADIP II”  
T35X & T36X  
ORDERING INFORMATION  
T
3XX  
A
105  
M
035  
A
S*  
TANTALUM  
LEAD MATERIAL  
SERIES  
S — Standard  
Insert appropriate number to  
replace letter “X” — 350, 351, 352,  
FAILURE RATE LEVEL  
353, 354, 355, 356, 363, 368, or 369.  
A — Not Applicable  
VOLTAGE RATING  
For 6.3 Volts use 006  
CASE SIZE  
A, B, C, D, E, F, G, H, J, K, L & M  
CAPACITANCE TOLERANCE  
M — ±20%  
PICOFARAD CODE  
First two digits are significant  
figures. Third figure is the  
number of zeros following.  
K — ±10%  
J — ±5% Available on special order.  
*T363 & T369 capacitors  
available only with M & K tolerances  
*Part Number Example: T350A105M035AS (14 digits – no spaces)  
T35X & T368  
MARKING INFORMATION  
KEMET  
Trademark  
Polarity  
Stripe (+)  
Capacitance  
(pF code)  
Polarity  
+
Voltage  
Rating  
Date  
Code  
T35X  
RATINGS AND PART NUMBER REFERENCE  
MAX.  
DISSI-  
PATION  
MAX.  
DISSI-  
PATION  
CAPAC-  
ITANCE  
µF  
D.C.  
FACTOR  
CAPAC-  
ITANCE  
µF  
D.C.  
FACTOR  
CASE  
SIZE  
LEAKAGE %@25°C,  
µA@25°C  
CASE  
SIZE  
LEAKAGE %@25°C,  
µA@25°C  
KEMET PART NUMBER  
120Hz  
KEMET PART NUMBER  
120Hz  
3 VOLT RATING AT 85°C —  
2 VOLT RATING AT 125°C  
6.3 VOLT RATING AT 85°C —  
4 VOLT RATING AT 125°C  
4.7  
5.6  
6.8  
8.2  
10.0  
A
A
A
A
A
T35(1)A475(3)003AS  
T35(1)A565(3)003AS  
T35(1)A685(3)003AS  
T35(1)A825(3)003AS  
T35(1)A106(3)003AS  
0.5  
0.5  
0.5  
0.5  
0.5  
5
5
5
6
6
3.3  
3.9  
4.7  
5.6  
6.8  
A
T35(1)A335(3)006AS  
T35(1)A395(3)006AS  
T35(1)A475(3)006AS  
T35(1)A565(3)006AS  
T35(1)A685(3)006AS  
0.5  
5
5
5
5
5
A
A
A
A
0.5  
0.5  
0.5  
0.5  
12.0  
15.0  
B
B
T35(1)B126(3)003AS  
T35(1)B156(3)003AS  
0.5  
0.5  
6
6
8.2  
10.0  
B
B
T35(1)B825(3)006AS  
T35(1)B106(3)006AS  
0.5  
0.5  
6
6
18.0  
22.0  
C
C
T35(1)C186(3)003AS  
T35(1)C226(3)003AS  
0.5  
0.5  
6
6
12.0  
15.0  
C
C
T35(1)C126(3)006AS  
T35(1)C156(3)006AS  
0.6  
0.7  
6
6
27.0  
33.0  
D
D
T35(1)D276(3)003AS  
T35(1)D336(3)003AS  
0.6  
0.8  
6
6
18.0  
22.0  
D
D
T35(1)D186(3)006AS  
T35(1)D226(3)006AS  
0.9  
1.1  
6
6
39.0  
47.0  
E
E
T35(1)E396(3)003AS  
T35(1)E476(3)003AS  
0.9  
1.1  
6
6
27.0  
33.0  
E
E
T35(1)E276(3)006AS  
T35(1)E336(3)006AS  
1.3  
1.6  
6
6
56.0  
68.0  
F
F
T35(1)F566(3)003AS  
T35(1)F686(3)003AS  
1.3  
1.6  
6
6
39.0  
47.0  
F
F
T35(1)F396(3)006AS  
T35(1)F476(3)006AS  
1.9  
2.3  
6
6
82.0  
100.0  
G
G
T35(1)G826(3)003AS  
T35(1)G107(3)003AS  
2.0  
2.4  
8
8
56.0  
68.0  
G
G
T35(1)G566(3)006AS  
T35(1)G686(3)006AS  
2.7  
3.3  
6
6
120.0  
150.0  
H
H
T35(1)H127(3)003AS  
T35(1)H157(3)003AS  
2.9  
3.6  
8
8
82.0  
100.0  
H
H
T35(1)H826(3)006AS  
T35(1)H107(3)006AS  
3.9  
4.8  
8
8
180.0  
220.0  
J
J
T35(2)J187(3)003AS  
T35(2)J227(3)003AS  
4.3  
5.3  
8
8
120.0  
150.0  
J
J
T35(2)J127(3)006AS  
T35(2)J157(3)006AS  
5.8  
7.2  
8
8
270.0  
330.0  
K
K
T35(2)K277(3)003AS  
T35(2)K337(3)003AS  
6.5  
7.9  
8
8
180.0  
220.0  
K
K
T35(2)K187(3)006AS  
T35(2)K227(3)006AS 10.0  
8.6  
8
8
390.0  
470.0  
L
L
T35(2)L397(3)003AS  
T35(2)L477(3)003AS 10.0  
9.4  
9
9
270.0  
330.0  
L
L
T35(2)L277(3)006AS 10.0  
T35(2)L337(3)006AS 10.0  
8
8
560.0  
680.0  
M
M
T35(2)M567(3)003AS 10.0  
T35(2)M687(3)003AS 10.0  
9
9
(1) To complete KEMET Part Number, insert Series Designation as follows: “0” = T350, “1” = T351, “2” = T352, “3” = T353, “4” = T354, “5” = T355, “6” = T356.  
(2) To complete KEMET Part Number, insert only Series Designation as follows: “0” = T350, “3” = T353, “4” = T354, “6” = T356.  
(3) To complete KEMET Part Number, insert Capacitance Tolerance Symbol: “M” = ±20%, “K” = ±10%.  
Bold Face print indicates popular values.  
NOTE: Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’s option.  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  
63  
TANTALUM DIPPED / RADIAL — POLAR  
T350, T351, T352, T353, T354, T355 & T356 SERIES “ULTRADIP II”  
T35X  
RATINGS AND PART NUMBER REFERENCE  
MAX.  
DISSI-  
PATION  
MAX.  
DISSI-  
PATION  
FACTOR  
CAPAC-  
ITANCE  
µF  
D.C.  
FACTOR  
CAPAC-  
ITANCE  
µF  
D.C.  
CASE  
SIZE  
LEAKAGE %@25°C,  
µA@25°C  
CASE  
SIZE  
LEAKAGE %@25°C,  
KEMET PART NUMBER  
120Hz  
KEMET PART NUMBER  
µA@25°C  
120Hz  
10 VOLT RATING AT 85°C —  
7 VOLT RATING AT 125°C  
20 VOLT RATING AT 85°C —  
13 VOLT RATING AT 125°C  
2.2  
2.7  
3.3  
3.9  
4.7  
A
T35(1)A225(3)010AS  
T35(1)A275(3)010AS  
T35(1)A335(3)010AS  
T35(1)A395(3)010AS  
T35(1)A475(3)010AS  
0.5  
5
5
5
5
5
1.0  
1.2  
1.5  
1.8  
2.2  
A
T35(1)A105(3)020AS  
T35(1)A125(3)020AS  
T35(1)A155(3)020AS  
T35(1)A185(3)020AS  
T35(1)A225(3)020AS  
0.5  
3
5
5
5
5
A
A
A
A
0.5  
0.5  
0.5  
0.5  
A
A
A
A
0.5  
0.5  
0.5  
0.5  
5.6  
6.8  
B
B
T35(1)B565(3)010AS  
T35(1)B685(3)010AS  
0.5  
0.5  
5
5
2.7  
3.3  
B
B
T35(1)B275(3)020AS  
T35(1)B335(3)020AS  
0.5  
0.5  
5
5
8.2  
10.0  
C
C
T35(1)C825(3)010AS  
T35(1)C106(3)010AS  
0.7  
0.8  
6
6
3.9  
4.7  
C
C
T35(1)C395(3)020AS  
T35(1)C475(3)020AS  
0.6  
0.8  
5
5
12.0  
15.0  
18.0  
22.0  
E
E
E
E
T35(1)E126(3)010AS  
T35(1)E156(3)010AS  
T35(1)E186(3)010AS  
T35(1)E226(3)010AS  
1.0  
1.2  
1.4  
1.8  
6
6
6
6
5.6  
6.8  
D
D
T35(1)D565(3)020AS  
T35(1)D685(3)020AS  
0.9  
1.1  
5
5
8.2  
10.0  
E
E
T35(1)E825(3)020AS  
T35(1)E106(3)020AS  
1.3  
1.6  
6
6
27.0  
33.0  
F
F
T35(1)F276(3)010AS  
T35(1)F336(3)010AS  
2.2  
2.6  
6
6
12.0  
15.0  
F
F
T35(1)F126(3)020AS  
T35(1)F156(3)020AS  
1.9  
2.4  
6
6
39.0  
G
T35(1)G396(3)010AS  
3.1  
6
18.0  
22.0  
G
G
T35(1)G186(3)020AS 2.9  
T35(1)G226(3)020AS 3.5  
6
6
47.0  
56.0  
68.0  
H
H
H
T35(1)H476(3)010AS  
T35(1)H566(3)010AS  
T35(1)H686(3)010AS  
3.8  
4.5  
5.4  
6
6
6
27.0  
33.0  
J
J
T35(2)J276(3)020AS  
T35(2)J336(3)020AS  
4.3  
5.3  
6
6
82.0  
100.0  
J
J
T35(2)J826(3)010AS  
T35(2)J107(3)010AS  
6.6  
8.0  
8
8
39.0  
47.0  
K
K
T35(2)K396(3)020AS  
T35(2)K476(3)020AS  
6.2  
7.5  
6
6
120.0  
150.0  
K
K
T35(2)K127(3)010AS  
T35(2)K157(3)010AS 10.0  
9.6  
8
8
56.0  
68.0  
L
L
T35(2)L566(3)020AS  
T35(2)L686(3)020AS 10.0  
9.0  
6
6
180.0  
220.0  
L
L
T35(2)L187(3)010AS 10.0  
T35(2)L227(3)010AS 10.0  
8
8
82.0  
100.0  
M
M
T35(2)M826(3)020AS 10.0  
T35(2)M107(3)020AS 10.0  
8
8
16 VOLT RATING AT 85°C —  
10 VOLT RATING AT 125°C  
25 VOLT RATING AT 85°C —  
16.5 VOLT RATING AT 125°C  
1.5  
1.8  
2.2  
2.7  
3.3  
A
T35(1)A155(3)016AS  
T35(1)A185(3)016AS  
T35(1)A225(3)016AS  
T35(1)A275(3)016AS  
T35(1)A335(3)016AS  
0.5  
5
5
5
5
5
1.0  
1.2  
1.5  
1.8  
A
T35(1)A105(3)025AS 0.5  
3
5
5
5
A
A
A
A
0.5  
0.5  
0.5  
0.5  
A
A
A
T35(1)A125(3)025AS  
T35(1)A155(3)025AS  
T35(1)A185(3)025AS  
0.5  
0.5  
0.5  
2.2  
2.7  
3.3  
B
B
B
T35(1)B225(3)025AS 0.5  
5
5
5
3.9  
4.7  
B
B
T35(1)B395(3)016AS  
T35(1)B475(3)016AS  
0.5  
0.6  
5
5
T35(1)B275(3)025AS  
T35(1)B335(3)025AS  
0.5  
0.7  
5.6  
6.8  
C
C
T35(1)C565(3)016AS  
T35(1)C685(3)016AS  
0.7  
0.9  
5
5
3.9  
4.7  
C
C
T35(1)C395(3)025AS  
T35(1)C475(3)025AS  
0.8  
0.9  
5
5
8.2  
10.0  
12.0  
15.0  
E
E
E
E
T35(1)E825(3)016AS  
T35(1)E106(3)016AS  
T35(1)E126(3)016AS  
T35(1)E156(3)016AS  
1.0  
1.3  
1.5  
1.8  
6
6
6
6
5.6  
6.8  
8.2  
E
E
E
E
T35(1)E565(3)025AS  
T35(1)E685(3)025AS  
T35(1)E825(3)025AS  
T35(1)E106(3)025AS  
1.1  
1.4  
1.6  
2.0  
5
5
6
6
10.0  
18.0  
22.0  
F
F
T35(1)F186(3)016AS  
T35(1)F226(3)016AS  
2.2  
2.6  
6
6
12.0  
15.0  
G
T35(1)G126(3)025AS 2.4  
6
6
GT35(1  
)G156(3)025AS 3.0  
27.0  
33.0  
H
H
T35(1)H276(3)016AS  
T35(1)H336(3)016AS  
3.2  
4.0  
6
6
18.0  
22.0  
H
H
T35(1)H186(3)025AS  
T35(1)H226(3)025AS 4.4  
3.6  
6
6
39.0  
47.0  
J
J
T35(2)J396(3)016AS  
T35(2)J476(3)016AS  
4.7  
5.6  
6
6
27.0  
33.0  
J
J
T35(2)J276(3)025AS  
T35(2)J336(3)025AS  
5.4  
6.6  
6
6
56.0  
68.0  
K
K
T35(2)K566(3)016AS  
T35(2)K686(3)016AS  
6.8  
8.2  
6
6
39.0  
47.0  
K
K
T35(2)K396(3)025AS  
T35(2)K476(3)025AS 9.4  
7.8  
6
6
82.0  
100.0  
L
L
T35(2)L826(3)016AS  
T35(2)L107(3)016AS 10.0  
9.8  
8
8
56.0  
68.0  
L
L
T35(2)L566(3)025AS 10.0  
T35(2)L686(3)025AS 10.0  
6
6
120.0  
150.0  
M
M
T35(2)M127(3)016AS 10.0  
T35(2)M157(3)016AS 10.0  
8
8
(1) To complete KEMET Part Number, insert Series Designation as follows: “0” = T350, “1” = T351, “2” = T352, “3” = T353, “4” = T354, “5” = T355, “6” = T356.  
(2) To complete KEMET Part Number, insert only Series Designation as follows: “0” = T350, “3” = T353, “4” = T354, “6” = T356.  
(3) To complete KEMET Part Number, insert Capacitance Tolerance Symbol: “M” = ±20%, “K” = ±10%.  
Bold Face print indicates popular values.  
NOTE: Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’s option.  
64  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  
TANTALUM DIPPED / RADIAL - POLAR  
T350, T351, T352, T353, T354, T355 & T356 SERIES “ULTRADIP II”  
T35X  
RATINGS AND PART NUMBER REFERENCE  
MAX.  
DISSI-  
PATION  
MAX.  
DISSI-  
PATION  
FACTOR  
CAPAC-  
ITANCE  
µF  
D.C.  
FACTOR  
CAPAC-  
ITANCE  
µF  
D.C.  
CASE  
SIZE  
LEAKAGE %@25°C,  
µA@25°C  
CASE  
SIZE  
LEAKAGE %@25°C,  
KEMET PART NUMBER  
120Hz  
KEMET PART NUMBER  
µA@25°C  
120Hz  
35 VOLT RATING AT 85°C —  
23 VOLT RATING AT 125°C  
50 VOLT RATING AT 85°C —  
33 VOLT RATING AT 125°C  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
A
T35(1)A104(3)035AS  
T35(1)A124(3)035AS  
T35(1)A154(3)035AS  
T35(1)A184(3)035AS  
T35(1)A224(3)035AS  
T35(1)A274(3)035AS  
T35(1)A334(3)035AS  
T35(1)A394(3)035AS  
T35(1)A474(3)035AS  
T35(1)A564(3)035AS  
T35(1)A684(3)035AS  
T35(1)A824(3)035AS  
T35(1)A105(3)035AS  
0.5  
3
3
3
3
3
3
3
3
3
3
3
3
3
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
A
T35(1)A104(3)050AS  
T35(1)A124(3)050AS  
T35(1)A154(3)050AS  
T35(1)A184(3)050AS  
T35(1)A224(3)050AS  
T35(1)A274(3)050AS  
T35(1)A334(3)050AS  
0.5  
3
3
3
3
3
3
3
A
A
A
A
A
A
A
A
A
A
A
A
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
A
A
A
A
A
A
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
B
B
B
B
B
B
T35(1)B394(3)050AS  
T35(1)B474(3)050AS  
T35(1)B564(3)050AS  
T35(1)B684(3)050AS  
T35(1)B824(3)050AS  
T35(1)B105(3)050AS  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
3
3
3
3
3
3
1.2  
1.5  
B
B
T35(1)B125(3)035AS  
T35(1)B155(3)035AS  
0.5  
0.5  
5
5
1.2  
D
T35(1)D125(3)050AS  
0.5  
5
1.5  
1.8  
2.2  
E
E
E
T35(1)E155(3)050AS  
T35(1)E185(3)050AS  
T35(1)E225(3)050AS  
0.6  
0.7  
0.9  
5
5
5
1.8  
2.2  
C
C
T35(1)C185(3)035AS  
T35(1)C225(3)035AS  
0.5  
0.6  
5
5
2.7  
3.3  
D
D
T35(1)D275(3)035AS  
T35(1)D335(3)035AS  
0.7  
0.9  
5
5
2.7  
3.3  
F
F
T35(1)F275(3)050AS  
T35(1)F335(3)050AS  
1.1  
1.3  
5
5
3.9  
4.7  
E
E
T35(1)E395(3)035AS  
T35(1)E475(3)035AS  
1.0  
1.3  
5
5
3.9  
4.7  
G
G
T35(1)G395(3)050AS  
T35(1)G475(3)050AS  
1.6  
1.9  
5
5
5.6  
6.8  
F
F
T35(1)F565(3)035AS  
T35(1)F685(3)035AS  
1.6  
1.9  
5
5
5.6  
H
T35(1)H565(3)050AS  
2.2  
5
6.8  
8.2  
J
J
T35(2)J685(3)050AS  
T35(2)J825(3)050AS  
2.7  
3.3  
5
6
8.2  
10.0  
G
T35(1)G825(3)035AS  
2.3  
2.8  
6
6
GT35(1  
)G106(3)035AS  
10.0  
12.0  
K
K
T35(2)K106(3)050AS  
T35(2)K126(3)050AS  
4.0  
4.8  
6
6
12.0  
15.0  
J
J
T35(2)J126(3)035AS  
T35(2)J156(3)035AS  
3.4  
4.2  
6
6
15.0  
18.0  
L
L
T35(2)L156(3)050AS  
T35(2)L186(3)050AS  
6.0  
7.2  
6
6
18.0  
22.0  
K
K
T35(2)K186(3)035AS  
T35(2)K226(3)035AS  
5.0  
6.2  
6
6
22.0  
M
T35(2)M226(3)050AS 8.8  
6
27.0  
33.0  
L
L
T35(2)L276(3)035AS  
T35(2)L336(3)035AS  
7.6  
9.2  
6
6
39.0  
47.0  
M
M
T35(2)M396(3)035AS 10.0  
T35(2)M476(3)035AS 10.0  
6
6
(1) To complete KEMET Part Number, insert Series Designation as follows: “0” = T350, “1” = T351, “2” = T352, “3” = T353, “4” = T354, “5” = T355, “6” = T356.  
(2) To complete KEMET Part Number, insert only Series Designation as follows: “0” = T350, “3” = T353, “4” = T354, “6” = T356.  
(3) To complete KEMET Part Number, insert Capacitance Tolerance Symbol: “M” = ±20%, “K” = ±10%.  
Bold Face print indicates popular values.  
NOTE: Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’s option.  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  
65  
TANTALUM DIPPED / RADIAL — MIL-PRF-49137/2  
T363 (CX02), T369 (CX12) SERIES  
Product manufactured to the requirements of MIL-PRF-49137  
basis for Group A and Group B inspection to insure compliance.  
Product supplied per MIL-PRF-49137 also receives an additional  
post process burn-in for at least two (2) hours under accelerated  
voltage stress in excess of 125% of DC rated voltage. This post  
process burn-in is equivalent to 200 hours under rated conditions.  
satisfy all the performance characteristics of the UltraDip II. The  
performance characteristics meet or exceed the requirements of  
MIL-PRF-49137.  
In addition to the standard process testing done on the UltraDip II,  
all product supplied to MIL-PRF-49137 is sampled on a lot by lot  
CAPACITOR OUTLINE DRAWINGS  
DIMENSIONS — INCHES & (MILLIMETERS)  
T363 A-D CASE  
T363 (CX02)  
A, B, C & D CASES  
T369 (CX12)  
T369 A&B CASE ONLY  
A & B CASES  
.250 ± .025  
CASE  
SIZE  
D MAX  
H MAX  
D
(6.35 ± .64)  
D
MAX.  
MAX.  
0.175  
(4.45)  
0.350  
(8.89)  
A
B
C
D
H
H
A & B  
MAX.  
MAX.  
.020 ± .002  
(.51 ± .05)  
C & D  
0.250  
(6.35)  
0.450  
(11.43)  
.025 ± .002  
(.64 ± .05)  
.020 ± .002  
(.51 ± .05)  
.187 ± .032  
(4.75 ± .81)  
.187 ± .032  
(4.75 ± .81)  
0.350  
(8.89)  
0.610  
(15.49)  
.125 ± .015  
(3.18 ± .38)  
0.400  
(10.16)  
0.740  
(18.80)  
.250 ± .015  
(6.35 ± .38)  
MIL-PRF-49137 MARKING INFORMATION  
Mfg. -  
KEMET  
Capacitance Tolerance  
Capacitance  
Voltage  
(in Picofarad Code)  
Date  
Code  
Polarity  
MIL-PRF-49137/2 ORDERING INFORMATION  
CX  
02  
D
225  
K
TYPE  
CAPACITANCE TOLERANCE  
Capacitors, Fixed, Solid Tantalum  
Conformal Coated, Non-hermetically Sealed.  
Symbol  
Capacitance Tolerance  
Percent (±)  
STYLE  
02 (T363) A, B, C & D Cases  
12 (T369) A & B Cases Only  
K
M
10  
20  
CAPACITANCE IN PICORARAD CODE  
The nominal capacitance value, expressed in  
picofarads (pF), is identified by a three-digit number;  
the first two digits represent significant figures and  
the last digit specifies the number of zeros to follow.  
VOLTAGE  
Symbol  
Rated (857C)  
Volts, dc  
Surge (857C)  
Volts, dc  
D
F
H
J
K
M
N
6
8
10  
15  
20  
25  
35  
50  
13  
20  
26  
32  
46  
65  
*For KEMET Ordering Information, see page 63.  
66  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  
TANTALUM DIPPED / RADIAL — MIL-PRF-49137/2  
T363 (CX02), T369 (CX12) SERIES  
RATINGS & PART NUMBER REFERENCE  
MAX.  
DISSIPATION  
FACTOR  
%@25°C,  
120Hz  
CXO2  
(T363)  
MILITARY  
PART NUMBER  
CX12  
(T369)  
MILITARY  
PART NUMBER  
CAPACITANCE  
TOLERANCE  
±%  
T363, T369  
KEMET  
PART NUMBER  
D.C.  
LEAKAGE  
µA@25°C  
CAPACITANCE  
µF  
CASE  
SIZE  
6 VOLT RATING AT 85°C  
6.8  
A
10, 20  
T36(1)A685(2)006AS  
0.5  
6
CX02D685(2)  
CX12D685(2)  
47.0  
68.0  
B
B
10, 20  
10, 20  
T36(1)B476(2)006AS  
T36(1)B686(2)006AS  
2.3  
3.3  
6
6
CX02D476(2)  
CX02D686(2)  
CX12D476(2)  
CX12D686(2)  
150.0  
330.0  
C
D
10, 20  
10, 20  
T363C157(2)006AS  
T363D337(2)006AS  
7.2  
8
8
CX02D157(2)  
CX02D337(2)  
10.0  
10 VOLT RATING AT 85°C  
4.7  
33.0  
A
B
C
D
10, 20  
10, 20  
10, 20  
10, 20  
T36(1)A475(2)010AS  
T36(1)B336(2)010AS  
T363C107(2)010AS  
T363D227(2)010AS  
0.5  
5
6
8
8
CX02F475(2)  
CX02F336(2)  
CX02F107(2)  
CX02F227(2)  
CX12F475(2)  
CX12F336(2)  
2.6  
100.0  
220.0  
8.0  
10.0  
15 VOLT RATING AT 85°C  
3.3  
22.0  
A
B
C
D
10, 20  
10, 20  
10, 20  
10, 20  
T36(1)A335(2)015AS  
T36(1)B226(2)015AS  
T363C686(2)015AS  
T363D157(2)015AS  
0.5  
5
6
6
8
CX02H335(2)  
CX02H226(2)  
CX02H686(2)  
CX02H157(2)  
CX12H335(2)  
CX12H226(2)  
2.6  
68.0  
8.2  
150.0  
10.0  
20 VOLT RATING AT 85°C  
2.2  
15.0  
A
B
C
D
10, 20  
10, 20  
10, 20  
10, 20  
T36(1)A225(2)020AS  
T36(1)B156(2)020AS  
T363C476(2)020AS  
T363D107(2)020AS  
0.5  
5
6
6
8
CX02J225(2)  
CX02J156(2)  
CX02J476(2)  
CX02J107(2)  
CX12J225(2)  
CX12J156(2)  
2.4  
47.0  
7.5  
100.0  
10.0  
25 VOLT RATING AT 85°C  
1.5  
10.0  
33.0  
68.0  
A
B
C
D
10, 20  
10, 20  
10, 20  
10, 20  
T36(1)A155(2)025AS  
T36(1)B106(2)025AS  
T363C336(2)025AS  
T363D686(2)025AS  
0.5  
5
6
6
6
CX02K155(2)  
CX02K106(2)  
CX02K336(2)  
CX02K686(2)  
CX12K155(2)  
CX12K106(2)  
2.0  
6.6  
10.0  
35 VOLT RATING AT 85°C  
6.8  
B
C
10, 20  
10, 20  
T36(1)B685(2)035AS  
1.9  
5
CX02M685(2)  
CX02M226(2)  
CX12M685(2)  
22.0  
T363C226(2)035AS  
6.2  
6
33.0  
47.0  
D
D
10, 20  
10, 20  
T363D336(2)035AS  
T363D476(2)035AS  
9.2  
10.0  
6
6
CX02M336(2)  
CX02M476(2)  
50 VOLT RATING AT 85°C  
0.1  
A
A
A
A
A
A
A
10, 20  
10, 20  
10, 20  
10, 20  
10, 20  
10, 20  
10, 20  
T36(1)A104(2)050AS  
T36(1)A154(2)050AS  
T36(1)A224(2)050AS  
T36(1)A334(2)050AS  
T36(1)A474(2)050AS  
T36(1)A684(2)050AS  
T36(1)A105(2)050AS  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
3
3
3
3
3
3
3
CX02N104(2)  
CX02N154(2)  
CX02N224(2)  
CX02N334(2)  
CX02N474(2)  
CX02N684(2)  
CX02N105(2)  
CX12N104(2)  
CX12N154(2)  
CX12N224(2)  
CX12N334(2)  
CX12N474(2)  
CX12N684(2)  
CX12N105(2)  
0.15  
0.22  
0.33  
0.47  
0.68  
1.0  
1.5  
2.2  
3.3  
4.7  
B
B
B
B
10, 20  
10, 20  
10, 20  
10, 20  
T36(1)B155(2)050AS  
T36(1)B225(2)050AS  
T36(1)B335(2)050AS  
T36(1)B475(2)050AS  
0.6  
0.9  
1.3  
1.9  
5
5
5
5
CX02N155(2)  
CX02N225(2)  
CX02N335(2)  
CX02N475(2)  
CX12N155(2)  
CX12N225(2)  
CX12N335(2)  
CX12N475(2)  
6.8  
10.0  
15.0  
C
C
C
10, 20  
10, 20  
10, 20  
T363C685(2)050AS  
T363C106(2)050AS  
T363C156(2)050AS  
2.7  
4.0  
6.0  
5
6
6
CX02N685(2)  
CX02N106(2)  
CX02N156(2)  
22.0  
D
10, 20  
T363D226(2)050AS  
8.8  
6
CX02N226(2)  
(1) To complete KEMET part number, insert Series Designation as follows: 3 - T363 (CX02); 9 - T369 (CX12)  
(2) To complete KEMET or military part number, insert Capacitance Tolerance Symbol as follows:  
M - ±20%, K - ±10%  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  
67  
TANTALUM DIPPED / RADIAL  
T368 SERIES “ULTRADIP II”  
T368 CAPACITOR OUTLINE DRAWING  
C & D CASES  
T
MAX.  
W
T368  
MAX.  
DIMENSIONS — INCHES + (MILLIMETERS)  
.100 MAX.  
(2.54)  
H
CASE  
SIZE  
TMAX  
WMAX  
HMAX  
0.250  
(6.35)  
0.40  
(10.16)  
0.42  
(10.67)  
C
.025±.002  
(.64±.05)  
.187±.032  
(4.75±.81  
)
0.250  
(6.35)  
0.460  
(11.68)  
0.52  
(13.20)  
D
.250±.015  
(6.35±.38)  
T368  
RATINGS AND PART NUMBER REFERENCE  
MAX.  
DISSI-  
PATION  
MAX.  
DISSI-  
PATION  
FACTOR  
CAPAC-  
D.C.  
FACTOR  
CAPAC-  
ITANCE  
µF  
D.C.  
ITANCE  
µF  
CASE  
SIZE  
LEAKAGE %@25°C,  
CASE  
SIZE  
LEAKAGE %@25°C,  
KEMET PART NUMBER  
µA@25°C  
120Hz  
KEMET PART NUMBER  
µA@25°C  
120Hz  
6 VOLT RATING AT 85°C  
25 VOLT RATING AT 85°C  
82.0  
100.0  
120.0  
150.0  
C
C
C
C
T368C826(1)006AS  
T368C107(1)006AS  
T368C127(1)006AS  
T368C157(1)006AS  
3.9  
4.8  
5.8  
7.2  
8
8
8
8
12.0  
15.0  
18.0  
22.0  
27.0  
33.0  
C
C
C
C
C
C
T368C126(1)025AS  
T368C156(1)025AS  
T368C186(1)025AS  
T368C226(1)025AS  
T368C276(1)025AS  
T368C336(1)025AS  
2.4  
3.0  
3.6  
4.4  
5.4  
6.6  
6
6
6
6
6
6
180.0  
220.0  
270.0  
330.0  
D
D
D
D
T368D187(1)006AS  
T368D227(1)006AS  
T368D277(1)006AS  
T368D337(1)006AS  
8.6  
10.0  
10.0  
10.0  
8
8
8
8
39.0  
47.0  
56.0  
68.0  
D
D
D
D
T368D396(1)025AS  
T368D476(1)025AS  
T368D566(1)025AS  
T368D686(1)025AS  
7.8  
9.4  
10.0  
10.0  
6
6
6
6
10 VOLT RATING AT 85°C  
47.0  
56.0  
68.0  
82.0  
100.0  
C
C
C
C
C
T368C476(1)010AS  
T368C566(1)010AS  
T368C686(1)010AS  
T368C826(1)010AS  
T368C107(1)010AS  
3.8  
4.4  
5.4  
6.5  
8.0  
6
6
6
8
8
35 VOLT RATING AT 85°C  
8.2  
10.0  
12.0  
15.0  
18.0  
22.0  
C
C
C
C
C
C
T368C825(1)035AS  
T368C106(1)035AS  
T368C126(1)035AS  
T368C156(1)035AS  
T368C186(1)035AS  
T368C226(1)035AS  
2.3  
2.8  
3.3  
4.2  
5.0  
6.2  
6
6
6
6
6
6
120.0  
150.0  
180.0  
220.0  
D
D
D
D
T368D127(1)010AS  
T368D157(1)010AS  
T368D187(1)010AS  
T368D227(1)010AS  
9.6  
10.0  
10.0  
10.0  
8
8
8
8
27.0  
33.0  
39.0  
47.0  
D
D
D
D
T368D276(1)035AS  
T368D336(1)035AS  
T368D396(1)035AS  
T368D476(1)035AS  
7.5  
9.2  
10.0  
10.0  
6
6
6
6
15 VOLT RATING AT 85°C  
27.0  
33.0  
39.0  
47.0  
56.0  
68.0  
C
C
C
C
C
C
T368C276(1)015AS  
T368C336(1)015AS  
T368C396(1)015AS  
T368C476(1)015AS  
T368C566(1)015AS  
T368C686(1)015AS  
3.2  
4.0  
4.7  
5.6  
6.8  
8.2  
6
6
6
6
6
6
50 VOLT RATING AT 85°C  
5.6  
6.8  
8.2  
10.0  
12.0  
15.0  
C
C
C
C
C
C
T368C565(1)050AS  
T368C685(1)050AS  
T368C825(1)050AS  
T368C106(1)050AS  
T368C126(1)050AS  
T368C156(1)050AS  
2.2  
2.7  
3.2  
4.0  
4.8  
6.0  
5
5
6
6
6
6
82.0  
100.0  
120.0  
150.0  
D
D
D
D
T368D826(1)015AS  
T368D107(1)015AS  
T368D127(1)015AS  
T368D157(1)015AS  
9.8  
10.0  
10.0  
10.0  
8
8
8
8
18.0  
22.0  
D
D
T368D186(1)050AS  
T368D226(1)050AS  
7.2  
8.8  
6
6
20 VOLT RATING AT 85°C  
(1) To complete KEMET part number, insert capacitance tolerance K– ±10%, M– ±20%,  
or J– ±5% (Available on special order).  
18.0  
22.0  
27.0  
33.0  
39.0  
47.0  
C
C
C
C
C
C
T368C186(1)020AS  
T368C226(1)020AS  
T368C276(1)020AS  
T368C336(1)020AS  
T368C396(1)020AS  
T368C476(1)020AS  
2.8  
3.5  
4.3  
5.3  
6.2  
7.5  
6
6
6
6
6
6
* For Marking Information refer to page 63.  
* For Ordering Information refer to page 63.  
56.0  
68.0  
82.0  
D
D
D
D
T368D566(1)020AS  
T368D686(1)020AS  
T368D826(1)020AS  
T368D107(1)020AS  
8.9  
10.0  
10.0  
10.0  
6
6
8
8
100.0  
68  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  
TANTALUM DIPPED / 3 LEADED  
T396 & T398 SERIES “ULTRADIP III”  
KEMET UltraDip III Capacitors offer the advantages of solid tanta-  
cise lead wire spacing within ±0.015 inch. The gold color epoxy per-  
mits laser markings with outstanding permanency and legibility. All  
case sizes are printed with capacitance, voltage and vendor I.D.  
lum construction and a “fail-safe” insertion mechanism. The three-  
leaded design (the anode is in the center) enables operators to  
insert the capacitors into printed circuit boards correctly without hav-  
ing to visually determine polarity. This timesaving device also elimi-  
nates board damage that may result from incorrect insertion.  
The UltraDip III Series from KEMET Capacitors exhibit low DCL,  
ESR and Impedance and have excellent temperature stability.  
These capacitors may be ordered with precut leads (see drawing for  
lengths) or in KEMET Capacitor ARIS packaging (leads taped and  
on reels) for high speed automatic insertion equipment.  
The UltraDip III Series features a capacitance range of 0.1 to 680  
µF at 3 to 50 VDC. These miniature dipped solid tantalum capacitors  
are encased in a tough plastic barrier coating that maintains the pre-  
CAPACITOR  
OUTLINE DRAWING  
T396  
T398  
T
T
MAX.  
MAX.  
W
W
MAX.  
MAX.  
H
H
MAX.  
MAX.  
.187±.05  
(4.75±1.27)  
.187±.032  
(4.75±.81)  
+
-
-
.02±.002  
(.5±.05)  
.02±.002  
(.5±.05)  
.10±.008 (2.54±.20)  
.20±.015 (5.08±.38)  
.10±.008 (2.54±.20)  
.20±.015 (5.08±.38)  
DIMENSIONS—INCHES & (MILLIMETERS)  
Both  
T396  
T398  
CAPACITOR  
MARKING  
Series  
Case  
Size  
W
Width  
T
H*  
Height  
H*  
Height  
Thickness  
Capacitance  
T396/T398  
T396/T398  
T396/T398  
T396/T398  
T396/T398  
T396/T398  
T396/T398  
T396/T398  
T396/T398  
T396/T398  
T396/T398  
T396/T398  
A
B
C
D
E
F
G
H
J
.280 (7.1)  
.280 (7.1)  
.280 (7.1)  
.280 (7.1)  
.280 (7.1)  
.280 (7.1)  
.280 (7.1)  
.280 (7.1)  
.300 (7.6)  
.340 (8.6)  
.340 (8.6)  
.360 (9.1)  
.190 (4.8)  
.190 (4.8)  
.200 (5.1)  
.200 (5.1)  
.230 (5.8)  
.240 (6.1)  
.250 (6.3)  
.270 (6.9)  
.300 (7.6)  
.340 (8.6)  
.340 (8.6)  
.360 (9.1)  
.310 (7.9)  
.320 (8.1)  
.360 (9.1)  
.370 (9.4)  
.380 (9.7)  
.410 (10.4)  
.420 (10.7)  
.420 (10.7)  
.460 (11.7)  
.500 (12.7)  
.560 (14.2)  
.620 (15.7)  
.355 (9.0)  
.365 (9.3)  
.390 (9.9)  
.390 (9.9)  
.415 (10.5)  
.430 (10.9)  
.440 (11.2)  
.440 (11.2)  
.480 (12.2)  
.500 (12.7)  
.580 (14.7)  
.620 (15.7)  
(pF code)  
KEMET  
Trademark  
Date  
Code  
Voltage  
Rating  
K
L
M
*NOTE: “H” dimensions are from seating plane to top of capacitor.  
ORDERING INFORMATION  
T
39X  
A
105  
M
035  
A
S
TANTALUM  
LEAD MATERIAL  
SERIES  
S — Standard  
T396 Straight leads  
T398 Standoff leads  
FAILURE RATE LEVEL  
A — Not Applicable  
CASE SIZE  
A, B, C, D, E, F, G, H, J, K, L & M  
VOLTAGE RATING  
For 6.3 Volts use 006  
PICOFARAD CODE  
CAPACITANCE TOLERANCE  
First two digits are significant  
figures. Third figure is the  
number of zeros following.  
M — ±20% (K — 10% Special Order Only)  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  
69  
TANTALUM DIPPED / 3 LEADED —POLAR  
T396 & T398 SERIES “ULTRADIP III”  
RATINGS & PART NUMBER REFERENCE  
MAX.  
DISSI-  
PATION  
MAX.  
DISSI-  
PATION  
FACTOR  
CAPAC-  
ITANCE  
µF  
D.C.  
FACTOR  
CAPAC-  
ITANCE  
µF  
D.C.  
CASE  
SIZE  
LEAKAGE %@25°C,  
µA@25°C  
CASE  
SIZE  
LEAKAGE %@25°C,  
KEMET PART NUMBER  
120Hz  
KEMET PART NUMBER  
µA@25°C  
120Hz  
3 VOLT RATING AT 85°C —  
2 VOLT RATING AT 125°C  
6.3 VOLT RATING AT 85°C —  
4 VOLT RATING AT 125°C  
4.7  
6.8  
A
A
A
B
C
D
E
F
T39(1)A475(2)003AS  
T39(1)A685(2)003AS  
T39(1)A106(2)003AS  
T39(1)B156(2)003AS  
T39(1)C226(2)003AS  
T39(1)D336(2)003AS  
T39(1)E476(2)003AS  
T39(1)F686(2)003AS  
T39(1)G107(2)003AS  
T39(1)H157(2)003AS  
0.5  
0.5  
0.5  
0.5  
0.5  
0.8  
1.1  
1.6  
2.4  
3.6  
5
5
6
6
6
6
6
6
8
8
3.3  
4.7  
6.8  
10.0  
15.0  
22.0  
33.0  
47.0  
68.0  
100.0  
A
T39(1)A335(2)006AS  
T39(1)A475(2)006AS  
T39(1)A685(2)006AS  
T39(1)B106(2)006AS  
T39(1)C156(2)006AS  
T39(1)D226(2)006AS  
T39(1)E336(2)006AS  
T39(1)F476(2)006AS  
T39(1)G686(2)006AS  
T39(1)H107(2)006AS  
0.5  
5
5
5
6
6
6
6
6
6
8
A
A
B
C
D
E
F
0.5  
0.5  
0.5  
0.7  
1.1  
1.6  
2.3  
3.3  
4.8  
10.0  
15.0  
22.0  
33.0  
47.0  
68.0  
100.0  
150.0  
G
H
G
H
220.0  
330.0  
470.0  
680.0  
J
K
L
T39(1)J227(2)003AS  
T39(1)K337(2)003AS  
T39(1)L477(2)003AS  
5.3  
7.9  
10.0  
8
8
9
9
150.0  
220.0  
330.0  
J
K
L
T39(1)J157(2)006AS  
T39(1)K227(2)006AS  
T39(1)L337(2)006AS  
7.2  
10.0  
10.0  
8
8
8
M
T39(1)M687(2)003AS 10.0  
10 VOLT RATING AT 85°C —  
7 VOLT RATING AT 125°C  
16 VOLT RATING AT 85°C —  
10 VOLT RATING AT 125°C  
2.2  
3.3  
4.7  
A
T39(1)A225(2)010AS  
T39(1)A335(2)010AS  
T39(1)A475(2)010AS  
T39(1)B685(2)010AS  
T39(1)C106(2)010AS  
T39(1)E156(2)010AS  
T39(1)E226(2)010AS  
T39(1)F336(2)010AS  
T39(1)H476(2)010AS  
T39(1)H686(2)010AS  
0.5  
0.5  
0.5  
0.5  
0.8  
1.2  
1.8  
2.6  
3.8  
5.4  
5
5
5
5
6
6
6
6
6
6
1.5  
2.2  
3.3  
4.7  
6.8  
10.0  
15.0  
22.0  
33.0  
A
T39(1)A155(2)016AS  
T39(1)A225(2)016AS  
T39(1)A335(2)016AS  
T39(1)B475(2)016AS  
T39(1)C685(2)016AS  
T39(1)E106(2)016AS  
T39(1)E156(2)016AS  
T39(1)F226(2)016AS  
T39(1)H336(2)016AS  
0.5  
0.5  
0.5  
0.6  
0.9  
1.3  
1.8  
2.6  
4.0  
5
5
5
5
5
6
6
6
6
A
A
B
C
E
E
F
A
A
B
C
E
E
F
6.8  
10.0  
15.0  
22.0  
33.0  
47.0  
68.0  
H
H
H
47.0  
68.0  
100.0  
150.0  
J
K
L
T39(1)J476(2)016AS  
T39(1)K686(2)016AS  
T39(1)L107(2)016AS  
5.6  
8.2  
10.0  
6
6
8
8
100.0  
150.0  
220.0  
J
K
l
T39(1)J107(2)010AS  
T39(1)K157(2)010AS  
T39(1)L227(2)010AS  
8.0  
10.0  
10.0  
8
8
8
M
T39(1)M157(2)016AS 10.0  
20 VOLT RATING AT 85°C —  
13 VOLT RATING AT 125°C  
25 VOLT RATING AT 85°C —  
16.5 VOLT RATING AT 125°C  
1.0  
1.5  
2.2  
3.3  
4.7  
A
T39(1)A105(2)020AS  
T39(1)A155(2)020AS  
T39(1)A225(2)020AS  
T39(1)B335(2)020AS  
T39(1)C475(2)020AS  
T39(1)D685(2)020AS  
T39(1)E106(2)020AS  
T39(1)F156(2)020AS  
T39(1)G226(2)020AS  
T39(1)J336(2)020AS  
0.5  
0.5  
0.5  
0.5  
0.8  
1.1  
1.6  
2.4  
3.5  
5.3  
3
5
5
5
5
5
6
6
6
6
1.0  
1.5  
2.2  
3.3  
4.7  
A
T39(1)A105(2)025AS  
T39(1)A155(2)025AS  
T39(1)B225(2)025AS  
T39(1)B335(2)025AS  
T39(1)C475(2)025AS  
T39(1)E685(2)025AS  
T39(1)E106(2)025AS  
T39(1)G156(2)025AS  
T39(1)H226(2)025AS  
0.5  
0.5  
0.5  
0.7  
0.9  
1.4  
2.0  
3.0  
4.4  
3
5
5
5
5
5
6
6
6
A
A
B
C
D
E
F
A
B
B
C
E
E
G
H
6.8  
6.8  
10.0  
15.0  
22.0  
33.0  
10.0  
15.0  
22.0  
G
J
33.0  
47.0  
68.0  
J
K
L
T39(1)J336(2)025AS  
T39(1)K476(2)025AS  
T39(1)L686(2)025AS  
6.6  
9.4  
10.0  
6
6
6
47.0  
68.0  
100.0  
K
L
M
T39(1)K476(2)020AS  
T39(1)L686(2)020AS  
T39(1)M107(2)020AS 10.0  
7.5  
10.0  
6
6
8
35 VOLT RATING AT 85°C —  
23 VOLT RATING AT 125°C  
50 VOLT RATING AT 85°C —  
33 VOLT RATING AT 125°C  
0.10  
0.15  
0.22  
0.33  
0.47  
0.68  
1.0  
1.5  
2.2  
3.3  
4.7  
A
T39(1)A104(2)035AS  
T39(1)A154(2)035AS  
T39(1)A224(2)035AS  
T39(1)A334(2)035AS  
T39(1)A474(2)035AS  
T39(1)A684(2)035AS  
T39(1)A105(2)035AS  
T39(1)B155(2)035AS  
T39(1)C225(2)035AS  
T39(1)D335(2)035AS  
T39(1)E475(2)035AS  
T39(1)F685(2)035AS  
T39(1)G106(2)035AS  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.6  
0.9  
1.3  
1.9  
2.8  
3
3
3
3
3
3
3
5
5
5
5
5
6
0.10  
0.15  
0.22  
0.33  
0.47  
0.68  
1.0  
1.5  
2.2  
3.3  
4.7  
A
T39(1)A104(2)050AS  
T39(1)A154(2)050AS  
T39(1)A224(2)050AS  
T39(1)A334(2)050AS  
T39(1)B474(2)050AS  
T39(1)B684(2)050AS  
T39(1)B105(2)050AS  
T39(1)E155(2)050AS  
T39(1)E225(2)050AS  
T39(1)F335(2)050AS  
T39(1)G475(2)050AS  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.6  
0.9  
1.3  
1.9  
3
3
3
3
3
3
3
5
5
5
5
A
A
A
A
A
A
B
C
D
E
F
A
A
A
B
B
B
E
E
F
G
6.8  
10.0  
6.8  
10.0  
15.0  
22.0  
J
K
L
T39(1)J685(2)050AS  
T39(1)K106(2)050AS  
T39(1)L156(2)050AS  
T39(1)M226(2)050AS  
2.7  
4.0  
6.0  
8.8  
5
6
6
6
G
15.0  
22.0  
33.0  
47.0  
J
K
L
T39(1)J156(2)035AS  
T39(1)K226(2)035AS  
T39(1)L336(2)035AS  
4.2  
6.2  
9.2  
6
6
6
6
M
M
T39(1)M476(2)035AS 10.0  
(1) To complete KEMET Part Number, insert Series Designation as follows: “6” = T396, “8” = T398.  
(2) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: “M” = ±20%, “K” = ±10%.  
NOTE: Higher voltage/tigher tolerance products may be shipped, at KEMET’s option, within the same case size.  
70  
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300  

相关型号：

T363L105M035A

 TANTALUM DIPPED / RADIAL - POLAR

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T363M105J035A

 TANTALUM DIPPED / RADIAL - POLAR

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T363M105K035A

 TANTALUM DIPPED / RADIAL - POLAR

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T363M105M035A

 TANTALUM DIPPED / RADIAL - POLAR

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T3641500

 Circular Connector, 14 Contact(s), Plastic, Female, Solder Terminal, Receptacle,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL

T3644005

 Circular Connector, 14 Contact(s), Metal, Male, Solder Terminal,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL

T3644058

 Circular Connector, 14 Contact(s), Metal, Male, Solder Terminal,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL

T3644501

 Circular Connector, 14 Contact(s), Metal, Male, Solder Terminal,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL

T3644502

 Circular Connector, 14 Contact(s), Metal, Male, Solder Terminal,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL

T3644504

 Circular Connector, 14 Contact(s), Metal, Male, Solder Terminal,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL

T3644518

 Circular Connector, 14 Contact(s), Metal, Male, Solder Terminal,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL

T3644528

 Circular Connector, 14 Contact(s), Metal, Male, Solder Terminal,

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AMPHENOL
©2020 ICPDF网 联系我们和版权申明