T419A105J020BB42527280 [KEMET]
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 5% +Tol, 5% -Tol, 1uF, Surface Mount, 1005, CHIP;
| 型号： | T419A105J020BB42527280 |
| 厂家： | 
KEMET CORPORATION |
| 描述： | Tantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 5% +Tol, 5% -Tol, 1uF, Surface Mount, 1005, CHIP 电容器 |
| 文件： | 总19页 (文件大小：1624K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MIL–PRF (CWR Style) Established Reliability
T419 Series CWR19 Style MIL–PRF–55365/11
Overview
The KEMET T419 Series is approved to MIL–PRF–55365/11
(CWR19), with Weibull failure rates of B level (0.1% failures per
1,000 hours), C level (0.01% failures per 1,000 hours), or D level
(0.001% failures per 1,000 hours). This CWR19 product is a
precision-molded device, with compliant terminations and indelible
laser marking. Tape and reeling per EIA 481–1 is standard.
Benefits
Applications
• Established reliability options
Typical applications include decoupling and filtering in Military
and aerospace applications requiring CWR19 devices.
• Taped and reeled per EIA 481–1
• Symmetrical, compliant terminations
• Laser-marked case
• 100% surge current test available on all case sizes
• Qualified to MIL–PRF-55365/11, Style CWR19
• Termination options B, C, H, K
• Weibull failure options B, C, and D
• Exponential failure rates M, P, R, S
• Voltage rating of 4 – 50 VDC
• Operating temperature range of -55˚C to +125˚C
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder.
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013
1
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
KEMET Ordering Information
T
419
A
225
K
004
A
H
4251
7280
Capacitor
Class
Case Capacitance Capacitance
Packaging
(C-Spec)
Series
Voltage
Failure Rate/Design
Lead Material
Surge
Size
Code (pF) Tolerance
T =
CWR19
A, B,
First two
digits
represent
J = ±5%
K = ±10% 006 =
M = ±20% 6.3 V
004 = 4 V Weibull
C = Hot Solder Blank = No Surge Blank = 7" Reel
Tantalum Established C, D,
Reliability E, F,
A = non-ER
B = (0.1%/1,000 hours)
Dipped
4250= 25ºC after
Weibull
7280 = 13" Reel
7610 = Bag
H = Standard
G, H, significant
010 = 10 V C = (0.01%/1,000 hours) Solder Coated
015 = 15 V D =(0.001%/1,000 hours) (SnPb 5% Pb
4251 = -55ºC and 7005 = Moisture
85ºC after Weibull bags
4252 = -55ºC
X
figures. Third
digit specifies
number of
zeros.
020 = 20 V Exponential
minimum)
025 = 25 V M = (1.0%/1,000 hours)
035 = 35 V P = (0.1%/1,000 hours)
B = Gold Plated and 85ºC before
K = Solder
Weibull
050 = 50 V R = (0.01%/1,000 hours) Fused
S =(0.001%/1,000 hours)
Defense MIL–PRF–55365/11 Ordering Information
CWR19
K
H
225
K
C
D
A
Capacitance
Tolerance
Capacitor Style Voltage Termination Finish Capacitance Code (pF)
Reliability Level
Case Code
Surge Current Option
Per MIL–PRF– C = 4 V
B = Gold Plated
C = Hot solder
dipped
First two digits
represent significant
figures. Third digit
specifies number of
zeros.
J = ±5%
K = ±10%
M = ±20%
Weibull
A = non-ER
A, B, C, D, E, A = +25°C after
55365/11
D = 6 V
F, G, H, X
Weibull
F = 10 V
H = 15 V H = Solder Plated
J = 20 V
K = 25 V
M = 35 V
N = 50 V
B = (0.1%/1,000 hours)
C = (0.01%/1,000 hours)
D =(0.001%/1,000 hours)
Exponential
M = (1.0%/1,000 hours)
P = (0.1%/1,000 hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
B = -55°C +85°C after
Weibull
C = -55°C +85°C
before Weibull
Z = None
K = Solder fused
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
-55°C to 125°C
0.33 – 330 µF @ 120 Hz/25°C
J Tolerance (5%), K Tolerance (10%), M Tolerance (20%)
4 – 50 V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table
≤ 0.01 CV (µA) at rated voltage after 5 minutes
ESR (100 kHz)
Leakage Current
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013
2
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Qualification
Test
Condition
Characteristics
Within ±10% of initial value
Within initial limits
Δ C/C
DF
85°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
Endurance
DCL
ESR
Δ C/C
DF
Within 1.25 x initial limit
Within initial limits
Within ±10% of initial value
Within initial limits
Storage Life
125°C @ 0 volts, 2,000 hours
DCL
ESR
Δ C/C
DF
Within 1.25 x initial limit
Within initial limits
Within ±5% of initial value
Within initial limits
MIL–STD–202, Method 107, Condition B, mounted,
-55°C to 125°C, 1,000 cycles
Thermal Shock
DCL
ESR
+25°C
IL*
Within 1.25 x initial limit
Within initial limits
-55°C
±10%
IL
+85°C
±10%
+125°C
±20%
Extreme temperature exposure at a
succession of continuous steps at +25°C,
-55°C, +25°C, +85°C, +125°C, +25°C
Δ C/C
DF
Temperature Stability
IL
1.5 x IL
10 x IL
1.5 x IL
12 x IL
DCL
IL
n/a
Δ C/C
DF
Within ±5% of initial value
Within initial limits
25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
Surge Voltage
DCL
ESR
Δ C/C
DF
Within initial limits
Within initial limits
Within ±10% of initial value
Within initial limits
MIL–STD–202, Method 213, Condition I, 100 G Peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Mechanical Shock/Vibration
DCL
Within initial limits
Additional qualification tests
per MIL–PRF–55365/11
Please contact KEMET for more information.
*IL = Initial limit
Certification
MIL–PRF–55365/11
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013
3
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
1,000
100
10
1000
100
10
T419D106/15
T419D106/15_IMP
T419F336/15_IMP
T419H107/15_IMP
T419D106/15_ESR
T419F336/15_ESR
T419F107/15_ESR
T419F336/15
T419H107/15
1
1
0
0.1
100
1,000
10,000
100,000
1,000,000
10,000,000
100
1,000
10,000
Frequency (Hz)
100,000
1,000,000
10,000,000
Frequency (Hz)
Dimensions – Millimeters (Inches)
Metric will govern
Case Size
Component
P +0.025(0.010),
-0.13(0.005)
KEMET
L* ±0.38 (0.015)
2.54 (0.100)
3.81 (0.150)
5.08 (0.200)
3.81 (0.150)
5.08 (0.200)
5.59 (0.220)
6.73 (0.265)
7.24 (0.285)
6.93 (0.273)
W* ±0.38 (0.015)
H* ±0.38 (0.015)
1.27 (0.050)
1.27 (0.050)
1.27 (0.050)
1.27 (0.050)
1.27 (0.050)
1.78 (0.070)
2.79 (0.110)
2.79 (0.110)
2.74 (0.108)
W2
H2 Minimum
1.27 ±0.13
(0.050 ±0.005)
1.27 ±0.13
(0.050 ±0.005)
1.27 ±0.13
A
B
C
D
E
F
1.27 (0.050)
1.27 (0.050)
1.27 (0.050)
2.54 (0.100)
2.54 (0.100)
3.43 (0.135)
2.79 (0.110)
3.81 (0.150)
5.41 (0.213)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
1.27 (0.050)
1.27 (0.050)
1.19 (0.047)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
1.02 (0.040)
1.52 (0.060)
1.52 (0.060)
1.22 (0.048)
(0.050 ±0.005)
2.41 +0.13, -0.25
(0.095 +.005, -0.010)
2.41 +0.13, -0.25
(0.095 +0.005, -0.010)
3.30 ±0.13
(0.130 ±0.005)
2.67 ±0.13
(0.105 ±0.005)
3.68 +0.013, -0.51
(0.145 +0.005, -0.020)
3.05 ±0.13
G
H
X
(0.120 ±0.005)
Note: When solder coated terminations are required, add an additional 0.38 mm (0.015 inch) to the above tolerances for "L", "W", "H", "P" ,"W2" and "H2"
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 3/14/2013
4
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated Case Code/
KEMET Part
Number
(See below for
part options)
MIL–PRF–55365/11
Part Number
DC
Leakage
µA @ +20ºC
Max/5 Min
1.0
Moisture
Sensitivity
Reflow Temperature
DF
ESR
Cap
Case Size
% @ 20ºC
120 Hz Max
6.0
Ω @ +20ºC
100 kHz Max
12.0
12.0
12.0
8.0
(See below for
part options)
VDC
µF
KEMET/EIA
≤ 260ºC
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
3.3
4.7
6.8
10
15
22
22
33
33
47
A/1005
A/1005
A/1005
B/1505
B/1505
B/1505
D/1510
D/1510
E/2010
E/2010
E/2010
F/2214
G/2711
H/2915
H/2915
A/1005
A/1005
B/1505
B/1505
B/1505
D/1510
E/2010
D/1510
E/2010
E/2010
F/2214
F/2214
G/2711
G/2711
G/2711
H/2915
H/2915
A/1005
A/1005
B/1505
C/2005
B/1505
C/2005
D/1510
B/1505
C/2005
D/1510
E/2010
D/1510
E/2010
E/2010
F/2214
T419A335(1)004(2)(3)(4)
T419A475(1)004(2)(3)(4)
T419A685(1)004(2)(3)(4)
T419B106(1)004(2)(3)(4)
T419B156(1)004(2)(3)(4)
T419B226(1)004(2)(3)(4)
T419D226(1)004(2)(3)(4)
T419D336(1)004(2)(3)(4)
T419E336(1)004(2)(3)(4)
T419E476(1)004(2)(3)(4)
T419E686(1)004(2)(3)(4)
T419F107(1)004(2)(3)(4)
T419G157(1)004(2)(3)(4)
T419H227(1)004(2)(3)(4)
T419H337(1)004(2)(3)(4)
T419A335(1)006(2)(3)(4)
T419A475(1)006(2)(3)(4)
T419B685(1)006(2)(3)(4)
T419B106(1)006(2)(3)(4)
T419B156(1)006(2)(3)(4)
T419D156(1)006(2)(3)(4)
T419E156(1)006(2)(3)(4)
T419D226(1)006(2)(3)(4)
T419E226(1)006(2)(3)(4)
T419E336(1)006(2)(3)(4)
T419F476(1)006(2)(3)(4)
T419F686(1)006(2)(3)(4)
T419G686(1)006(2)(3)(4)
T419G107(1)006(2)(3)(4)
T419G157(1)006(2)(3)(4)
T419H227(1)006(2)(3)(4)
T419H337(1)006(2)(3)(4)
T419A225(1)010(2)(3)(4)
T419A335(1)010(2)(3)(4)
T419B475(1)010(2)(3)(4)
T419C475(1)010(2)(3)(4)
T419B685(1)010(2)(3)(4)
T419C685(1)010(2)(3)(4)
T419D685(1)010(2)(3)(4)
T419B106(1)010(2)(3)(4)
T419C106(1)010(2)(3)(4)
T419D106(1)010(2)(3)(4)
T419E106(1)010(2)(3)(4)
T419D156(1)010(2)(3)(4)
T419E156(1)010(2)(3)(4)
T419E226(1)010(2)(3)(4)
T419F336(1)010(2)(3)(4)
CWR19C(3)335(1)(2)A(5)
CWR19C(3)475(1)(2)A(5)
CWR19C(3)685(1)(2)A(5)
CWR19C(3)106(1)(2)B(5)
CWR19C(3)156(1)(2)B(5)
CWR19C(3)226(1)(2)B(5)
CWR19C(3)226(1)(2)D(5)
CWR19C(3)336(1)(2)D(5)
CWR19C(3)336(1)(2)E(5)
CWR19C(3)476(1)(2)E(5)
CWR19C(3)686(1)(2)E(5)
CWR19C(3)107(1)(2)F(5)
CWR19C(3)157(1)(2)G(5)
CWR19C(3)227(1)(2)H(5)
CWR19C(3)337(1)(2)H(5)
CWR19D(3)335(1)(2)A(5)
CWR19D(3)475(1)(2)A(5)
CWR19D(3)685(1)(2)B(5)
CWR19D(3)106(1)(2)B(5)
CWR19D(3)156(1)(2)B(5)
CWR19D(3)156(1)(2)D(5)
CWR19D(3)156(1)(2)E(5)
CWR19D(3)226(1)(2)D(5)
CWR19D(3)226(1)(2)E(5)
CWR19D(3)336(1)(2)E(5)
CWR19D(3)476(1)(2)F(5)
CWR19D(3)686(1)(2)F(5)
CWR19D(3)686(1)(2)G(5)
CWR19D(3)107(1)(2)G(5)
CWR19D(3)157(1)(2)G(5)
CWR19D(3)227(1)(2)H(5)
CWR19D(3)337(1)(2)H(5)
CWR19F(3)225(1)(2)A(5)
CWR19F(3)335(1)(2)A(5)
CWR19F(3)475(1)(2)B(5)
CWR19F(3)475(1)(2)C(5)
CWR19F(3)685(1)(2)B(5)
CWR19F(3)685(1)(2)C(5)
CWR19F(3)685(1)(2)D(5)
CWR19F(3)106(1)(2)B(5)
CWR19F(3)106(1)(2)C(5)
CWR19F(3)106(1)(2)D(5)
CWR19F(3)106(1)(2)E(5)
CWR19F(3)156(1)(2)D(5)
CWR19F(3)156(1)(2)E(5)
CWR19F(3)226(1)(2)E(5)
CWR19F(3)336(1)(2)F(5)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
3.0
4.0
6.0
8.0
10.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.8
4.0
4.0
6.0
10.0
10.0
20.0
1.0
1.0
1.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
4.0
4.0
3.0
3.0
3.0
2.0
1.0
1.0
0.9
12.0
12.0
8.0
8.0
8.0
5.0
3.0
5.0
3.5
3.5
3.5
1.5
1.0
1.1
1.1
0.9
0.9
12.0
12.0
8.0
5.5
8.0
8.0
8.0
68
100
150
220
330
3.3
4.7
6.8
10
15
15
15
22
10.0
10.0
10.0
10.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
6.0
8.0
6.0
8.0
10.0
10.0
10.0
10.0
10.0
10.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6.0
6.0
6.0
6.0
8.0
22
33
47
68
68
100
150
220
330
2.2
3.3
4.7
4.7
6.8
6.8
6.8
10
10
10
10
15
15
22
33
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
3.0
3.0
5.5
5.0
8.0
5.5
4.0
3.5
5.0
3.0
2.0
1.5
8.0
8.0
T
419
A
225
K
004
A
H
4251
7280
Packaging
Series
Capacitor
Class
Case Capacitance Ca
p
a
c
it
a
n
c
e
Voltage
Failure Rate/Design
Lead Material
Surge
Size
Code (pF) Tolerance
(C-Spec)
A, B, First two
T =
CWR19
J = ±5%
004 = 4 V Weibull
C = Hot Solder Blank = No Surge Blank = 7" Reel
Tantalum Established C, D,
digits
represent
K = ±10% 006 =
M = ±20% 6.3 V
A = non-ER
B = (0.1%/1,000 hours)
Dipped
H = Standard
4250= 25ºC after
Weibull
7280 = 13" Reel
7610 = Bag
Reliability E, F,
G, H, significant
010 = 10 V C = (0.01%/1,000 hours) Solder Coated
4251 = -55ºC and 7005 = Moisture
figures. Third 015 = 15 V D =(0.001%/1,000 hours) (SnPb 5% Pb 85ºC after Weibull bags
X
digit specifies 020 = 20 V Exponential minimum) 4252 = -55ºC
number of
zeros.
025 = 25 V M = (1.0%/1,000 hours)
035 = 35 V P = (0.1%/1,000 hours)
B = Gold Plated and 85ºC before
K = Solder Weibull
050 = 50 V R = (0.01%/1,000 hours) Fused
S =(0.001%/1,000 hours)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013
5
Roll Over for
Order Info.
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
KEMET Part
Number
(See below for
part options)
MIL–PRF–55365/11
Part Number
DC
Leakage
µA @ +20ºC
Moisture
Sensitivity
Reflow Temperature
≤ 260ºC
DF
ESR
Cap
Case Size
% @ 20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
(See below for
part options)
VDC
µF
KEMET/EIA
Max/5 Min
10
10
10
10
10
10
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
68
100
100
150
150
220
1
1.5
2.2
3.3
4.7
4.7
4.7
6.8
6.8
10
10
15
15
22
33
33
47
47
G/2711
G/2711
H/2915
H/2915
X/2824
H/2915
A/1005
A/1005
A/1005
B/1505
B/1505
C/2005
D/1510
D/1510
E/2010
D/1510
E/2010
E/2010
F/2214
F/2214
F/2214
G/2711
G/2711
H/2915
G/2711
H/2915
H/2915
A/1005
A/1005
B/1505
B/1505
D/1510
E/2010
E/2010
E/2010
F/2214
F/2214
G/2711
H/2915
H/2915
X/2824
A/1005
B/1505
D/1510
E/2010
F/2214
T419G686(1)010(2)(3)(4)
T419G107(1)010(2)(3)(4)
T419H107(1)010(2)(3)(4)
T419H157(1)010(2)(3)(4)
T419X157(1)010(2)(3)(4)
T419H227(1)010(2)(3)(4)
T419A105(1)015(2)(3)(4)
T419A155(1)015(2)(3)(4)
T419A225(1)015(2)(3)(4)
T419B335(1)015(2)(3)(4)
T419B475(1)015(2)(3)(4)
T419C475(1)015(2)(3)(4)
T419D475(1)015(2)(3)(4)
T419D685(1)015(2)(3)(4)
T419E685(1)015(2)(3)(4)
T419D106(1)015(2)(3)(4)
T419E106(1)015(2)(3)(4)
T419E156(1)015(2)(3)(4)
T419F156(1)015(2)(3)(4)
T419F226(1)015(2)(3)(4)
T419F336(1)015(2)(3)(4)
T419G336(1)015(2)(3)(4)
T419G476(1)015(2)(3)(4)
T419H476(1)015(2)(3)(4)
T419G686(1)015(2)(3)(4)
T419H686(1)015(2)(3)(4)
T419H107(1)015(2)(3)(4)
T419A684(1)020(2)(3)(4)
T419A105(1)020(2)(3)(4)
T419B155(1)020(2)(3)(4)
T419B225(1)020(2)(3)(4)
T419D335(1)020(2)(3)(4)
T419E475(1)020(2)(3)(4)
T419E685(1)020(2)(3)(4)
T419E106(1)020(2)(3)(4)
T419F106(1)020(2)(3)(4)
T419F156(1)020(2)(3)(4)
T419G226(1)020(2)(3)(4)
T419H336(1)020(2)(3)(4)
T419H476(1)020(2)(3)(4)
T419X476(1)020(2)(3)(4)
T419A474(1)025(2)(3)(4)
T419B105(1)025(2)(3)(4)
T419D225(1)025(2)(3)(4)
T419E335(1)025(2)(3)(4)
T419F685(1)025(2)(3)(4)
CWR19F(3)686(1)(2)G(5)
CWR19F(3)107(1)(2)G(5)
CWR19F(3)107(1)(2)H(5)
CWR19F(3)157(1)(2)H(5)
CWR19F(3)157(1)(2)X(5)
CWR19F(3)227(1)(2)H(5)
CWR19H(3)105(1)(2)A(5)
CWR19H(3)155(1)(2)A(5)
CWR19H(3)225(1)(2)A(5)
CWR19H(3)335(1)(2)B(5)
CWR19H(3)475(1)(2)B(5)
CWR19H(3)475(1)(2)C(5)
CWR19H(3)475(1)(2)D(5)
CWR19H(3)685(1)(2)D(5)
CWR19H(3)685(1)(2)E(5)
CWR19H(3)106(1)(2)D(5)
CWR19H(3)106(1)(2)E(5)
CWR19H(3)156(1)(2)E(5)
CWR19H(3)156(1)(2)F(5)
CWR19H(3)226(1)(2)F(5)
CWR19H(3)336(1)(2)F(5)
CWR19H(3)336(1)(2)G(5)
CWR19H(3)476(1)(2)G(5)
CWR19H(3)476(1)(2)H(5)
CWR19H(3)686(1)(2)G(5)
CWR19H(3)686(1)(2)H(5)
CWR19H(3)107(1)(2)H(5)
CWR19J(3)684(1)(2)A(5)
CWR19J(3)105(1)(2)A(5)
CWR19J(3)155(1)(2)B(5)
CWR19J(3)225(1)(2)B(5)
CWR19J(3)335(1)(2)D(5)
CWR19J(3)475(1)(2)E(5)
CWR19J(3)685(1)(2)E(5)
CWR19J(3)106(1)(2)E(5)
CWR19J(3)106(1)(2)F(5)
CWR19J(3)156(1)(2)F(5)
CWR19J(3)226(1)(2)G(5)
CWR19J(3)336(1)(2)H(5)
CWR19J(3)476(1)(2)H(5)
CWR19J(3)476(1)(2)X(5)
CWR19K(3)474(1)(2)A(5)
CWR19K(3)105(1)(2)B(5)
CWR19K(3)225(1)(2)D(5)
CWR19K(3)335(1)(2)E(5)
CWR19K(3)685(1)(2)F(5)
6.0
10.0
10.0
15.0
15.0
20.0
1.0
1.0
1.0
1.0
1.0
10.0
10.0
10.0
10.0
10.0
10.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6.0
6.0
6.0
8.0
8.0
6.0
8.0
8.0
8.0
8.0
8.0
10.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
1.1
1.1
0.9
0.9
0.9
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.9
15.0
15.0
15.0
9.0
5.0
5.5
6.0
6.0
3.0
6.0
4.0
4.0
3.0
3.0
3.0
1.1
1.1
0.9
1.1
0.9
0.9
15.0
15.0
9.0
9.0
6.0
6.0
5.0
5.0
3.0
3.0
2.5
0.9
0.9
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
3.0
5.0
6.0
10.0
10.0
10.0
10.0
15.0
1.0
68
68
100
0.68
1
1.5
2.2
3.3
4.7
6.8
10
10
15
22
33
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
3.0
4.0
6.0
10.0
10.0
1.0
1.0
1.0
1.0
2.0
47
47
0.9
0.47
1
2.2
3.3
6.8
15.0
10.0
6.0
4.0
3.0
419
T
A
225 K004
A
H
4251
7280
Packaging
Capacitor
Series
Case Capacitance Capacitance
Voltage
Failure Rate/Design
Lead Material
Surge
Class
Size
Code (pF) Tolerance
(C-Spec)
A = non-ER
CWR19
Tantalum Established C, D,
T =
A, B, First two
digits
J = ±5%
004 = 4 V Weibull
C = Hot Solder Blank = No Surge Blank = 7" Reel
Dipped
K = ±10% 006 =
4250= 25ºC after
7280 = 13" Reel
7610 = Bag
Reliability E, F, represent M = ±20% 6.3 V B = (0.1%/1,000 hours) H = Standard Weibull
G, H, significant
010 = 10 V C = (0.01%/1,000 hours) Solder Coated
4251 = -55ºC and 7005 = Moisture
figures. Third 015 = 15 V D =(0.001%/1,000 hours) (SnPb 5% Pb 85ºC after Weibull bags
X
digit specifies 020 = 20 V Exponential minimum) 4252 = -55ºC
number of
zeros.
025 = 25 V M = (1.0%/1,000 hours)
035 = 35 V P = (0.1%/1,000 hours)
B = Gold Plated and 85ºC before
K = Solder Weibull
050 = 50 V R = (0.01%/1,000 hours) Fused
S =(0.001%/1,000 hours)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013
6
Roll Over for
Order Info.
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
KEMET Part
Number
(See below for
part options)
MIL–PRF–55365/11
Part Number
DC
Leakage
µA @ +20ºC
Moisture
Sensitivity
Reflow Temperature
≤ 260ºC
DF
ESR
Cap
Case Size
% @ 20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
(See below for
part options)
VDC
µF
KEMET/EIA
Max/5 Min
25
25
25
35
35
35
35
22
33
33
0.33
6.8
10
X/2824
H/2915
X/2824
A/1005
G/2711
H/2915
X/2824
T419X226(1)025(2)(3)(4)
T419H336(1)025(2)(3)(4)
T419X336(1)025(2)(3)(4)
T419A334(1)035(2)(3)(4)
T419G685(1)035(2)(3)(4)
T419H106(1)035(2)(3)(4)
T419X156(1)035(2)(3)(4)
CWR19K(3)226(1)(2)X(5)
CWR19K(3)336(1)(2)H(5)
CWR19K(3)336(1)(2)X(5)
CWR19M(3)334(1)(2)A(5)
CWR19M(3)685(1)(2)G(5)
CWR19M(3)106(1)(2)H(5)
CWR19M(3)156(1)(2)X(5)
6.0
10.0
10.0
1.0
3.0
4.0
6.0
8.0
8.0
6.0
6.0
8.0
6.0
0.9
0.9
0.9
22.0
1.5
1
1
1
1
1
1
1
0.9
0.9
15
6.0
µA @ +20ºC
Max/5 Min
% @ 20ºC
120 Hz Max
Ω @ +20ºC
100 kHz Max
Reflow Temperature
≤ 260ºC
(See below for
part options)
(See below for
part options)
VDC
µF
KEMET/EIA
Rated
Voltage
Case Code/
Case Size
MIL–PRF–55365/11
Part Number
DC
Leakage
Moisture
Sensitivity
Rated Cap
KEMET Part Number
DF
ESR
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert failure rate letter per the Ordering Information found on page 2. Designates Reliability Level.
(3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = -55°C +85°C after Weibull, or 4252 = -55°C +85°C before Weibull. Designates
Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = -55°C +85°C after Weibull, C = -55°C +85°C before Weibull or Z = None. Designates Surge
current option.
Refer to Ordering Information for additional detail.
T
419
A
225
K
004
A
H
4251
7280
Capacitor
Class
Case Capacitance Capacitance
Packaging
(C-Spec)
Series
Voltage
Failure Rate/Design
Lead Material
Surge
Size
Code (pF) Tolerance
T =
CWR19
A, B,
First two
digits
represent
J = ±5%
K = ±10% 006 =
M = ±20% 6.3 V
004 = 4 V Weibull
C = Hot Solder Blank = No Surge Blank = 7" Reel
Tantalum Established C, D,
Reliability E, F,
A = non-ER
B = (0.1%/1,000 hours)
Dipped
4250= 25ºC after
Weibull
7280 = 13" Reel
7610 = Bag
H = Standard
G, H, significant
010 = 10 V C = (0.01%/1,000 hours) Solder Coated
015 = 15 V D =(0.001%/1,000 hours) (SnPb 5% Pb
4251 = -55ºC and 7005 = Moisture
85ºC after Weibull bags
4252 = -55ºC
X
figures. Third
digit specifies
number of
zeros.
020 = 20 V Exponential
minimum)
025 = 25 V M = (1.0%/1,000 hours)
035 = 35 V P = (0.1%/1,000 hours)
B = Gold Plated and 85ºC before
K = Solder Weibull
050 = 50 V R = (0.01%/1,000 hours) Fused
S =(0.001%/1,000 hours)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013
7
Roll Over for
Order Info.
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Recommended Voltage Derating Guidelines
120%
100%
80%
60%
40%
20%
0%
-55°C to 85°C
VR
85°C to 125°C
67% of VR
% Change in Working DC
Voltage with Temperature
Recommended Maximum
Application Voltage
50% of VR
33% of VR
% Change in Working DC Voltage
with Temperature
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
-55
25
85
125
Temperature (ºC)
Ripple Current/Ripple Voltage
Maximum Power
KEMET
EIA
Dissipation (P max)
Case Code
Case Code
mWatts @ 25°C
w/+20°C Rise
A
B
C
D
E
F
1005
1505
2005
1510
2010
2214
2711
2915
50
70
75
80
90
100
125
150
G
H
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 25°C
85°C
125°C
1.00
0.90
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = √P max*R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation(watts)
R = ESR at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013
8
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
125°C
Table 2 – Land Dimensions/Courtyard
Metric
Size
Density Level A:
Maximum (Most)
Density Level B:
Median (Nominal)
Density Level C:
Minimum (Least)
KEMET
Code
Land Protrusion (mm)
Land Protrusion (mm)
Land Protrusion (mm)
Case
EIA
X
Y
C
V1
V2
X
Y
C
V1
V2
X
Y
C
V1
V2
A¹
1005
1.45
2.15
1.20
5.60
2.70
1.35
1.85
1.05
4.50
2.20
1.25
1.55
0.90
3.60
1.90
B
C
D
E
F
1505
2005
1510
2010
2214
2711
2915
2824
1.45
1.45
2.60
2.60
3.50
2.85
3.85
3.25
2.30
2.30
2.30
2.30
2.30
2.80
2.80
2.75
1.75
2.40
1.75
2.40
2.65
2.95
3.20
3.10
6.80
8.10
2.70
2.70
4.00
4.00
4.90
4.20
5.20
6.80
1.35
1.35
2.45
2.45
3.35
2.75
3.75
3.10
1.90
1.90
1.90
1.90
1.90
2.40
2.40
2.35
1.65
2.30
1.65
2.30
2.55
2.85
3.10
3.00
5.70
7.00
5.70
7.00
7.50
8.60
9.10
8.90
2.20
2.20
3.50
3.50
4.40
3.70
4.70
6.30
1.25
1.25
2.35
2.35
3.25
2.65
3.65
3.00
1.55
1.55
1.55
1.55
1.55
2.05
2.05
1.95
1.55
2.15
1.55
2.15
2.45
2.75
3.00
2.90
4.90
6.10
4.90
6.10
6.70
7.80
8.30
8.00
1.92
1.90
3.20
3.20
4.10
3.40
4.40
6.00
6.80
8.10
8.60
9.70
G
H
X
10.20
10.00
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
1 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013
9
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Soldering Process
KEMET’s families of surface mount capacitors are compatible
Profile Feature
SnPb Assembly Pb-Free Assembly
with wave (single or dual), convection, IR, or vapor phase reflow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
profile conditions for convection and IR reflow reflect the profile
conditions of the IPC/J–STD–020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three reflow passes at these conditions.
Preheat/Soak
Temperature Minimum (TSmin
)
100°C
150°C
150°C
200°C
Temperature Maximum (TSmax
)
Time (ts) from Tsmin to Tsmax
Ramp-up Rate (TL to TP)
)
60 – 120 seconds
3°C/seconds maximum
183°C
60 – 120 seconds
3°C/seconds maximum
217°C
Liquidous Temperature (TL)
Time Above Liquidous (tL)
60 – 150 seconds
60 – 150 seconds
220°C*
235°C**
250°C*
260°C**
Peak Temperature (TP)
Note that although the X/7343–43 case size can withstand wave
soldering, the tall profile (4.3 mm maximum) dictates care in wave
process development.
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum
6°C/seconds maximum
6 minutes maximum
30 seconds maximum
6°C/seconds maximum
8 minutes maximum
Ramp-down Rate (TP to TL)
Time 25°C to Peak
Temperature
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
TL
tL
During typical reflow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
T
smax
T
smin
tS
25
25ºC to Peak
Time
Construction
MNO2 /Ta2O5/Ta
Silver Adhesive
Silver Paint
Washer
Leadframe
Leadframe
(-Cathode)
(+Anode)
Carbon
Tantalum Wire
Weld
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 10
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Capacitor Marking
KEMET
CWR 19
Style
Polarity
Indicator (+)
J
Picofarad Code
KEMET ID
336
25 K
230
Rated
Voltage
Date
Code*
* 230 = 30th week of 2012
Date Code *
1st digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year
01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 11
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
180 mm (7.0")
Top Tape Thickness
or
0.10 mm (0.004")
330 mm (13.0")
Maximum Thickness
Table 3 – Packaging Quantity
Tape and Reel Dimensions
180 mm 330 mm
Tape
Width
(mm)
KEMET Case
Codes
(7" diameter) (13" diameter)
A
B
C
D
E
F
G
H
X
1005
1505
2005
1510
2010
2214
2711
2915
2824
8
2500
2500
2500
2500
2500
1000
500
9500
9500
9500
9500
9500
3500
2500
2500
2500
12
12
12
12
12
12
12
12
500
500
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 12
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
T
T
P2
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
2
E
1
Po
ØDo
Ao
F
Ko
W
E
2
B
1
Bo
S
1
P
1
T
1
Embossment
For cavity size,
see Note 1 Table 4
Center Lines of Cavity
ØD
1
Cover Tape
is for tape feeder reference only,
including draft concentric about B
B
1
o
.
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
D1 Minimum
Note 1
1.0
R Reference S1 Minimum
Tape Size
8 mm
D0
E1
P0
P2
T Maximum T1 Maximum
Note 2
Note 3
25.0
(0.984)
(0.039)
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm
16 mm
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
1.5
(0.059)
30
(1.181)
Variable Dimensions — Millimeters (Inches)
B1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
Tape Size
8 mm
Pitch
E2 Minimum
F
P1
T2 Maximum W Maximum
A0,B0 & K0
6.25
(0.246)
10.25
(0.404)
14.25
3.5 ±0.05
4.0 ±0.10
2.5
(0.098)
4.6
8.3
(0.327)
12.3
Single (4 mm)
(0.138 ±0.002) (0.157 ±0.004)
5.5 ±0.05 8.0 ±0.10
(0.217 ±0.002) (0.315 ±0.004)
5.5 ±0.05 8.0 ±0.10
(0.217 ±0.002) (0.315 ±0.004)
Single (4 mm) &
Double (8 mm)
12 mm
16 mm
Note 5
(0.181)
4.6
(0.484)
16.3
Triple (12 mm)
(0.561)
(0.181)
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 13
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
8 mm
Peel Strength
0.1 to 1.0 Newton (10 to 100 gf)
0.1 to 1.3 Newton (10 to 130 gf)
12 and 16 mm
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Maximum
°
°
T
s
Width (mm) Rotation (
)
8,12
16 – 200
20
10
Bo
Tape
Maximum
°
S
Width (mm) Rotation (
)
8,12
16 – 56
72 – 200
20
10
5
Typical Component Centerline
Ao
Figure 4 – Bending Radius
Figure 3 – Maximum Lateral Movement
Embossed
Carrier
Punched
Carrier
8 mm & 12 mm Tape
16 mm Tape
0.5 mm maximum
0.5 mm maximum
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 14
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Figure 5 – Reel Dimensions
Full Radius,
W3 (Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm minimum)
See Note
W
2 (Measured at hub)
D
(See Note)
A
N
C
(Arbor hole
W
1 (Measured at hub)
diameter)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
B
(see Note)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
A
B Minimum
C
D Minimum
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
N Minimum
W1
W2 Maximum
W3
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
14.4
(0.567)
18.4
(0.724)
22.4
50
(1.969)
Shall accommodate tape width
without interference
12 mm
16 mm
(0.646 +0.078/-0.0)
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 15
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Round Sprocket Holes
Punched Carrier
8 mm & 12 mm only
START
END
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
100 mm
Minimum Leader
400 mm Minimum
Trailer
160 mm Minimum
Components
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 16
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Northeast Asia
Hong Kong
Tel: 852-2305-1168
2835 KEMET Way
Simpsonville, SC 29681
Sasso Marconi, Italy
Tel: 39-051-939111
Shenzhen, China
Tel: 86-755-2518-1306
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Beijing, China
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Tel: 86-10-5829-1711
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Shanghai, China
Tel: 86-21-6447-0707
Kamen, Germany
Tel: 49-2307-438110
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Taipei, Taiwan
Tel: 886-2-27528585
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
North America
Southeast Asia
Singapore
Southeast
Tel: 65-6586-1900
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Penang, Malaysia
Tel: 60-4-6430200
Northeast
Wilmington, MA
Tel: 978-658-1663
Bangalore, India
Tel: 91-806-53-76817
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 17
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
SPICE & FIT Software
http://capacitoredge.kemet.com
http://www.kemet.com/spice
http://www.kemet.com/keask
http://www.kemet.com:8080/elc
Search Our FAQs: KnowledgeEdge
Electrolytic LifeCalculator
Product Information
Resource
Location
Products
Technical Resources (Including Soldering Techniques)
RoHS Statement
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
http://www.kemet.com/rohs
Quality Documents
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
http://www.kemet.com/sample
http://www.kemet.com/kits
Sample Request
Engineering Kit Request
Contact
Resource
Location
Website
Contact Us
Investor Relations
Call Us
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 18
MIL–PRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing
Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.03.21 10:15:49 -04'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2002_T419 • 3/14/2013 19
相关型号：
T419A105J020BC4250
Tantalum Surface Mount CapacitorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020BC4251
Tantalum Surface Mount CapacitorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020BH4250
Tantalum Surface Mount CapacitorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020BH42507005
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 5% +Tol, 5% -Tol, 1uF, 1005Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020BH42507610
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 5% +Tol, 5% -Tol, 1uF, 1005Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020BH4251
Tantalum Surface Mount CapacitorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020BK4250
Tantalum Surface Mount CapacitorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020BK4251
Tantalum Surface Mount CapacitorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020CB4250
Tantalum Surface Mount CapacitorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020CB4251
Tantalum Surface Mount CapacitorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020CB42517005
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 20V, 5% +Tol, 5% -Tol, 1uF, 1005Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
T419A105J020CB4252
Tantalum Surface Mount CapacitorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
©2020 ICPDF网 联系我们和版权申明