首页 |元器件品牌

T496D227K004CH622A [KEMET]

Tantalum Surface Mount Capacitors;
T496D227K004CH622A
型号： T496D227K004CH622A
厂家： KEMET CORPORATION    KEMET CORPORATION
描述：

Tantalum Surface Mount Capacitors
文件： 总61页 (文件大小：3457K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Tantalum Surface Mount Capacitors  
Space Grade  
Electronic Components  
One world. One KEMET.  
Tantalum Surface Mount Capacitors  
Space Grade  
Table of Contents  
Page  
Why Choose KEMET ........................................................................................................................................................ 3  
T493 Series COTS Space Grade...................................................................................................................................... 5  
T496 Series Fail-Safe Fused Space Grade ................................................................................................................... 18  
T497 Series High Grade COTS Space Grade ............................................................................................................... 30  
T510 Series Multiple Anode Low ESR Space Grade ................................................................................................... 43  
Packaging Information................................................................................................................................................... 53  
KEMET Corporation Sales Offices ............................................................................................................................... 58  
Disclaimer ....................................................................................................................................................................... 59  
One world. One KEMET  
2
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
One world. One source. One KEMET.  
When you partner with KEMET, our entire global organization provides you with the  
coordinated service you need. No bouncing from supplier to supplier. No endless phone  
calls and web browsing. We’re your single, integrated source for electronic component  
solutions worldwide.  
Less hassles. More solutions.  
Our commitment to product quality and on-time delivery has helped customers  
succeed for over 90 years. There’s a reason KEMET components can be found in  
defense and aerospace equipment. Our reputation is built on a history of consistency,  
reliability and service.  
The “Easy-to-Buy-From” company.  
KEMET offers a level of responsiveness that far surpasses any other supplier. Our  
passion for customer service is evident throughout our global sales organization, which  
offers localized support bolstered by our worldwide logistics capabilities. Whether you  
need rush samples, technical assistance, in-person consultation, accelerated custom  
design, design collaboration or prototype services, we have a solution.  
One world. One KEMET  
3
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_Space Grade • 4/14/2014  
Made for you.  
When you need custom products delivered on a tight schedule, you can trust KEMET.  
Get direct design consultation from global experts, who help you get the job done on  
time and within budget.  
Working for a better world.  
KEMET is dedicated to economically, environmentally and socially sustainable  
development. We’ve adopted the Electronic Industry Code of Conduct (EICC) to  
address all aspects of corporate responsibility. Our manufacturing facilities have won  
numerous environmental excellence awards and recognitions, and our supply chain is  
certified. We believe doing the right thing is in everyone’s interest.  
About KEMET.  
KEMET Corporation is a leading global supplier of electronic components. We offer  
our customers the broadest selection of capacitor technologies in the industry across  
multiple dielectrics, along with an expanding range of electromechanical devices, and  
electromagnetic compatibility solutions. Our vision is to be the preferred supplier of  
electronic component solutions for customers demanding the highest standards of  
quality, delivery and service.  
One world. One KEMET  
4
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_Space Grade • 4/14/2014  
High Reliability COTS (CWR11 Style)  
T493 Series COTS Space Grade  
Overview  
KEMET's Space Grade Series of capacitors are suitable  
for use by defense/aerospace customers in high reliability  
space applications. This series meets the requirements of  
MIL–PRF–55365 as well as MIL–STD–1580. These capacitors  
(B=0.1%/k hours or C=0.01%/k hours), surge current level (10  
cycles -55°C and +85°C before and/or after Weibull grading),  
performance testing level (see chart for details on available  
options), ESR (low and standard), and termination finish (see  
incorporate an intensive testing and screening protocol which is description in each series). Fused versions are available for  
customizable depending upon customer's specific needs. The  
full part number allows for designation of Weibull grading level  
built-in circuit protection, as well as multi-anode designs for very  
low ESR values.  
Benefits  
• Standard case sizes A-X per EIA 535BAAC  
• Termination finishes options per MIL–PRF–55365: Gold Plated  
B, Hot Solder Dipped C, Solder Plated H, Solder Fused K  
• Weibull Grading C (0.01%/1,000 hours)  
• Surge current testing available per MIL–PRF–55365: 10 cycles  
@ 25˚C, 10 cycles @ -55˚C and +85˚C  
• Standard and low ESR options available  
• Operating temperature range of -55˚C to +125˚C  
• Capacitance values of 0.1 μF to 330 μF  
• Voltage rating of 4 – 50 VDC  
Applications  
Typical applications include decoupling and filtering in defense and aerospace applications.  
Environmental Compliance  
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.  
One world. One KEMET  
5
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
SPICE  
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The  
KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency,  
temperature, ripple, and DC bias conditions.  
Ordering Information  
T
493  
D
227  
K
006  
Voltage  
004 = 4 V  
C
H
61  
2
A
Capacitor  
Class  
Case  
Size  
Capacitance Capacitance  
Code (pF) Tolerance  
Failure Rate/  
Design  
Series  
Lead Material  
Surge  
ESR  
Testing  
T =  
Tantalum  
CRW11 A, B,  
First two digits J = ±5%  
C =  
C = Hot Solder 61 = None  
62 = 10 Cycles  
H = Standard  
Solder Coated 63 = 10 Cycles,  
(SnPb 5% Pb  
minimum)  
B = Gold Plated 64 = 10 Cycles  
K = Solder  
Fused  
1 = ESR - A = Option A  
Standard B = Option B  
Style  
Space  
Grade  
C, D,  
X
represent  
significant  
figures. Third  
digit specifies  
number of  
zeros.  
K = ±10%  
M = ±20%  
006 = 6.3 V .01%/1,000 Dipped  
010 = 10 V  
016 = 16 V  
020 = 20 V  
025 = 25 V  
035 = 35 V  
050 = 50 V  
hours  
after Weibull,25°C 2 = ESR - C = Option C  
Low  
after Weibull,-55°C  
and 85°C  
before Weibull,  
-55°C and 85°C  
65 = 10 Cycles  
Before and After  
Weibull, -55°C and  
85°C  
T = 100% Tin  
Performance Characteristics  
Item  
Performance Characteristics  
Operating Temperature  
Rated Capacitance Range  
Capacitance Tolerance  
Rated Voltage Range  
DF (120 Hz)  
-55°C to 125°C  
0.1 – 330 μF @ 120 Hz/25°C  
J Tolerance (5%), K Tolerance (10%), M Tolerance (20%)  
4 – 50 V  
Refer to Part Number Electrical Specification Table  
Refer to Part Number Electrical Specification Table  
≤ 0.01 CV (mA) at rated voltage after 5 minutes  
ESR (100 kHz)  
Leakage Current  
6
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Qualification  
Test  
Condition  
Characteristics  
Within ±10% of initial value  
Within initial limits  
Δ C/C  
DF  
85°C @ rated voltage, 2,000 hours  
125°C @ 2/3 rated voltage, 2,000 hours  
Endurance  
DCL  
ESR  
Δ C/C  
DF  
Within 1.25 x initial limit  
Within initial limits  
Within ±10% of initial value  
Within initial limits  
Storage Life  
125°C @ 0 volts, 2,000 hours  
DCL  
ESR  
Δ C/C  
DF  
Within 1.25 x initial limit  
Within initial limits  
Within ±5% of initial value  
Within initial limits  
MIL–STD–202, Method 107, Condition B, mounted, -55C° to  
125°C, 1,000 cycles  
Thermal Shock  
DCL  
ESR  
+25°C  
IL*  
Within 1.25 x initial limit  
Within initial limits  
-55°C  
±10%  
IL  
+85°C  
±10%  
+125°C  
±20%  
Extreme temperature exposure at a  
succession of continuous steps at +25ºC,  
-55ºC, +25ºC, +85ºC, +125ºC, +25ºC  
Δ C/C  
Temperature Stability  
DF  
IL  
1.5 x IL  
10 x IL  
1.5 x IL  
12 x IL  
DCL  
IL  
n/a  
Δ C/C  
DF  
Within ±5% of initial value  
Within initial limits  
25°C and 85°C, 1.32 x rated voltage 1,000 cycles.  
(125°C, 1.2 x rated voltage)  
Surge Voltage  
DCL  
ESR  
Δ C/C  
DF  
Within initial limits  
Within initial limits  
Within ±10% of initial value  
Within initial limits  
MIL–STD–202, Method 213, Condition I, 100 G peak.  
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,  
20 G peak  
Mechanical Shock/Vibration  
DCL  
Within initial limits  
*IL = Initial Limit  
Certification  
MIL-PRF-55365/8  
DSCC Drawing 07016  
7
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Test Methods  
Test Sequence  
Test Method  
Option A Option B Option C  
100% Serialization  
KEMET Standard  
X
100% IR Reflow  
MIL-PRF-55365  
MIL-PRF-55365  
KEMET Standard  
KEMET Standard  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
100% Thermal Shock  
100% Electrical Verification  
Read and Record Attributes/Variables Data  
100% Surge Current, Option C with 5% PDA Calculation  
100% Electrical Verification  
MIL-PRF-55365 with 5% PDA Calculation  
KEMET Standard  
X
X
X
Read and Record Attributes/Variables Data  
100% Voltage Aging, 10 hours @1.32 Vr  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365  
X
X
X
X
KEMET Standard  
100% Weibull Grading B or C  
MIL-PRF-55365  
X
X
100% Electrical Verification  
KEMET Standard  
Read and Record Attributes/Variables Data  
100% Surge Current, Option A or B with 5% PDA Calculation  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365 with 5% PDA Calculation  
KEMET Standard  
X
X
X
X
Read and Record Attributes/Variables Data  
3 Sigma Screening - All Electricals  
Read and Record Attributes/Variables Data  
Destructive Physical Analysis (DPA) (5 pieces- each lot)  
Group B Testing (22 pieces - each lot)  
Temperature Stability - sample  
KEMET Standard  
KEMET Standard  
X
X
X
KEMET Standard  
MIL-PRF-55365  
X
X
X
X
X
* See Note Below  
MIL-PRF-55365  
X
X
Solderability - Sample  
MIL-PRF-55365  
Group C Testing (57 pieces - each Lot)**  
100% X-ray  
MIL-PRF-55365  
MIL-PRF-55365  
X
X
100% X-ray - 2 Plane***  
MIL-PRF-55365 and KEMET Standard  
MIL-PRF-55365  
X
X
X
X
100% Physical Dimension Verification  
Data Pack  
Group A and C Summaries  
X
X
X
X
X
X
X
2 Plane X-ray JPEG photos  
DPA Report  
Attributes/Variables Data for Cap/Df/DCL/ESR  
X = Included in test option  
* Group B Testing = 10,000 Cycles Surge Current, 85°C, 40% Vr  
** Group C Post Moisture ESR limit = 1.25 initial limit  
*** 2 Plane X-ray = Top and side views, molded case wall thickness minimum 0.005" on all sides, negative/positive termination attachment criteria per MIL- STD-1580  
8
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Electrical Characteristics  
ESR vs. Frequency  
Capacitance vs. Frequency  
1000  
100  
10  
1
T493B106/020_IMP  
100  
T493E476/035_IMP  
T493X226/035_IMP  
T493B106/020_ESR  
T493E476/035_ESR  
T493X226/035_ESR  
10  
1
T493B106/020  
T493E476/035  
T493X226/035  
0.1  
0.01  
0.1  
100  
1,000  
10,000  
100,000  
1,000,000  
10,000,000  
100  
1,000  
10,000  
100,000  
1,000,000  
10,000,000  
Frequency (Hz)  
Frequency (Hz)  
Dimensions – Millimeters (Inches)  
Metric will govern  
CATHODE (-) END VIEW  
W
SIDE VIEW  
ANODE (+) END VIEW  
BOTTOM VIEW  
A
B
B
H
E
F
P
Termination cutout  
at KEMET's option,  
either end  
X
T
S
G
S
R
L
Case Size  
Component  
F* ±0.1 S* ±0.3 B* ±0.15  
±(.004) ±(.012) (Ref) ±.006  
KEMET EIA  
L*  
W*  
H*  
X (Ref)  
P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)  
3.2 ±0.2  
1.6 ±0.2  
1.6 ±0.2  
0.10 ± 0.10  
(.004 ± .004)  
3216–18  
1.2 (.047) 0.8 (.031)  
2.2 (.087) 0.8 (.031)  
2.2 (.087) 1.3 (.051)  
2.4 (.094) 1.3 (.051)  
2.4 (.094) 1.3 (.051)  
0.4 (.016)  
0.4 (.016)  
0.5 (.020)  
0.5 (.020)  
0.5 (.020)  
0.4 (.016)  
0.5 (.020)  
0.9 (.035)  
0.9 (.035)  
1.7 (.067)  
0.4 (.016) 0.13 (.005) 0.8 (.031) 1.1 (.043) 1.3 (.051)  
1.0 (.039) 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)  
1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)  
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)  
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)  
A
(0.126 ±0.008) (0.063 ±0.008) (0.063 ±0.008)  
3.5 ±0.2 2.8 ±0.2 1.9 ±0.2  
(0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008)  
6.0 ±0.3 3.2 ±0.3 2.5 ±0.3  
(0.236 ±0.03) (0.126 ±0.012) (0.098 ±0.012)  
7.3 ±0.3 4.3 ±0.3 2.8 ±0.3  
(0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012)  
7.3 ±0.3 4.3 ±0.3 4.0 ±0.3  
(0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012)  
0.10 ± 0.10  
(.004 ± .004)  
3528–21  
B
0.10 ± 0.10  
(.004 ± .004)  
6032–28  
C
0.10 ± 0.10  
(.004 ± .004)  
7343–31  
D
0.10 ± 0.10  
(.004 ± .004)  
7343–43  
X
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch.  
* MIL–C–55365/8 specified dimensions  
9
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Table 1 – Ratings & Part Number Reference  
Rated  
Rated  
Case Code/  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
Voltage Capacitance Case Size  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2.2  
3.3  
4.7  
6.8  
6.8  
A/3216–18  
A/3216–18  
A/3216–18  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
A/3216–18  
A/3216–18  
A/3216–18  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
T493A225(1)004(2)(3)(4)(5)(6)  
T493A335(1)004(2)(3)(4)(5)(6)  
T493A475(1)004(2)(3)(4)(5)(6)  
T493A685(1)004(2)(3)(4)(5)(6)  
T493B685(1)004(2)(3)(4)(5)(6)  
T493A106(1)004(2)(3)(4)(5)(6)  
T493B106(1)004(2)(3)(4)(5)(6)  
T493A156(1)004(2)(3)(4)(5)(6)  
T493B156(1)004(2)(3)(4)(5)(6)  
T493A226(1)004(2)(3)(4)(5)(6)  
T493B226(1)004(2)(3)(4)(5)(6)  
T493C226(1)004(2)(3)(4)(5)(6)  
T493B336(1)004(2)(3)(4)(5)(6)  
T493C336(1)004(2)(3)(4)(5)(6)  
T493B476(1)004(2)(3)(4)(5)(6)  
T493C476(1)004(2)(3)(4)(5)(6)  
T493B686(1)004(2)(3)(4)(5)(6)  
T493C686(1)004(2)(3)(4)(5)(6)  
T493D686(1)004(2)(3)(4)(5)(6)  
T493C107(1)004(2)(3)(4)(5)(6)  
T493D107(1)004(2)(3)(4)(5)(6)  
T493C157(1)004(2)(3)(4)(5)(6)  
T493D157(1)004(2)(3)(4)(5)(6)  
T493D227(1)004(2)(3)(4)(5)(6)  
T493D337(1)004(2)(3)(4)(5)(6)  
T493X337(1)004(2)(3)(4)(5)(6)  
T493A155(1)006(2)(3)(4)(5)(6)  
T493A225(1)006(2)(3)(4)(5)(6)  
T493A335(1)006(2)(3)(4)(5)(6)  
T493A475(1)006(2)(3)(4)(5)(6)  
T493B475(1)006(2)(3)(4)(5)(6)  
T493A685(1)006(2)(3)(4)(5)(6)  
T493B685(1)006(2)(3)(4)(5)(6)  
T493A106(1)006(2)(3)(4)(5)(6)  
T493B106(1)006(2)(3)(4)(5)(6)  
T493A156(1)006(2)(3)(4)(5)(6)  
T493B156(1)006(2)(3)(4)(5)(6)  
T493C156(1)006(2)(3)(4)(5)(6)  
T493B226(1)006(2)(3)(4)(5)(6)  
T493C226(1)006(2)(3)(4)(5)(6)  
T493B336(1)006(2)(3)(4)(5)(6)  
T493C336(1)006(2)(3)(4)(5)(6)  
T493B476(1)006(2)(3)(4)(5)(6)  
T493C476(1)006(2)(3)(4)(5)(6)  
T493D476(1)006(2)(3)(4)(5)(6)  
T493C686(1)006(2)(3)(4)(5)(6)  
T493D686(1)006(2)(3)(4)(5)(6)  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.6  
0.6  
0.9  
0.9  
0.9  
1.3  
1.3  
1.9  
1.9  
2.7  
2.7  
2.7  
4.0  
4.0  
6
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
8.0  
8.0  
8
8
8
8
8
6
6
6
6
6
6
6
6
6
6
6
6
8.0  
8.0  
8.0  
6.0  
5.5  
6.0  
3.5  
4.0  
3.5  
4.0  
3.5  
1.8  
3.5  
1.8  
3.0  
1.8  
3.5  
1.6  
0.8  
1.2  
0.8  
1.2  
0.8  
0.9  
0.7  
0.5  
8
8
8
6
5.5  
6
3.5  
4
3.5  
4
3.5  
1.8  
3.5  
1.8  
3
1.8  
3.5  
1.6  
0.8  
1.2  
0.8  
6.0  
4.0  
3.5  
3.0  
2.0  
2.0  
1.2  
1.5  
1.2  
1.5  
0.6  
0.5  
0.5  
0.5  
0.5  
0.5  
2.0  
0.25  
0.2  
0.2  
0.2  
0.3  
0.15  
0.7  
0.15  
0.2  
6
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.0  
10.0  
15.0  
15.0  
22.0  
22.0  
22.0  
33.0  
33.0  
47.0  
47.0  
68.0  
68.0  
68.0  
100.0  
100.0  
150  
150  
220  
330  
330  
1.5  
2.2  
3.3  
4.7  
4.7  
6.8  
6.8  
10  
10  
15  
6
8.8  
13.2  
13.2  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.6  
0.6  
0.9  
0.9  
0.9  
1.4  
1.4  
2
4
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6
6
3.5  
3.5  
2
1.2  
2
1
1.5  
0.7  
0.6  
0.6  
0.5  
0.6  
0.3  
2
0.25  
0.22  
0.2  
0.2  
15  
15  
22  
22  
33  
33  
47  
47  
6
6
6
6
6
6
6
6
2
2.9  
2.9  
2.9  
4.1  
4.1  
47  
68  
68  
6
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Capacitance  
Case Code/  
Case Size  
DC  
Leakage  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Standard ESR  
Low ESR  
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.  
(3) To complete KEMET part number, insert H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
10  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Table 1 – Ratings & Part Number Reference cont'd  
Rated  
Rated  
Case Code/  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
Voltage Capacitance Case Size  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
16  
16  
16  
16  
16  
16  
16  
16  
16  
16  
16  
100  
100  
150  
220  
220  
330  
330  
1
1.5  
2.2  
3.3  
3.3  
4.7  
4.7  
6.8  
6.8  
10  
10  
10  
15  
15  
22  
22  
33  
33  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
D/7343-31  
X/7343-43  
A/3216–18  
A/3216–18  
A/3216–18  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
X/7343-43  
D/7343-31  
D/7343-31  
X/7343-43  
D/7343-31  
X/7343-43  
X/7343-43  
A/3216–18  
A/3216–18  
A/3216–18  
A/3216–18  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
C/6032-28  
T493C107(1)006(2)(3)(4)(5)(6)  
T493D107(1)006(2)(3)(4)(5)(6)  
T493D157(1)006(2)(3)(4)(5)(6)  
T493D227(1)006(2)(3)(4)(5)(6)  
T493X227(1)006(2)(3)(4)(5)(6)  
T493D337(1)006(2)(3)(4)(5)(6)  
T493X337(1)006(2)(3)(4)(5)(6)  
T493A105(1)010(2)(3)(4)(5)(6)  
T493A155(1)010(2)(3)(4)(5)(6)  
T493A225(1)010(2)(3)(4)(5)(6)  
T493A335(1)010(2)(3)(4)(5)(6)  
T493B335(1)010(2)(3)(4)(5)(6)  
T493A475(1)010(2)(3)(4)(5)(6)  
T493B475(1)010(2)(3)(4)(5)(6)  
T493A685(1)010(2)(3)(4)(5)(6)  
T493B685(1)010(2)(3)(4)(5)(6)  
T493A106(1)010(2)(3)(4)(5)(6)  
T493B106(1)010(2)(3)(4)(5)(6)  
T493C106(1)010(2)(3)(4)(5)(6)  
T493B156(1)010(2)(3)(4)(5)(6)  
T493C156(1)010(2)(3)(4)(5)(6)  
T493B226(1)010(2)(3)(4)(5)(6)  
T493C226(1)010(2)(3)(4)(5)(6)  
T493C336(1)010(2)(3)(4)(5)(6)  
T493D336(1)010(2)(3)(4)(5)(6)  
T493C476(1)010(2)(3)(4)(5)(6)  
T493D476(1)010(2)(3)(4)(5)(6)  
T493C686(1)010(2)(3)(4)(5)(6)  
T493D686(1)010(2)(3)(4)(5)(6)  
T493X686(1)010(2)(3)(4)(5)(6)  
T493D107(1)010(2)(3)(4)(5)(6)  
T493D157(1)010(2)(3)(4)(5)(6)  
T493X157(1)010(2)(3)(4)(5)(6)  
T493D227(1)010(2)(3)(4)(5)(6)  
T493X227(1)010(2)(3)(4)(5)(6)  
T493X337(1)010(2)(3)(4)(5)(6)  
T493A684(1)016(2)(3)(4)(5)(6)  
T493A105(1)016(2)(3)(4)(5)(6)  
T493A155(1)016(2)(3)(4)(5)(6)  
T493A225(1)016(2)(3)(4)(5)(6)  
T493B335(1)016(2)(3)(4)(5)(6)  
T493B475(1)016(2)(3)(4)(5)(6)  
T493B685(1)016(2)(3)(4)(5)(6)  
T493C685(1)016(2)(3)(4)(5)(6)  
T493C106(1)016(2)(3)(4)(5)(6)  
T493C156(1)016(2)(3)(4)(5)(6)  
T493C226(1)016(2)(3)(4)(5)(6)  
6
6
9
8
8
8
8
8
8
8
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
4
8
8
8
8
8
10  
6
4
6
6
6
6
6
6
6
6
6
1.2  
0.8  
0.7  
0.7  
0.7  
0.5  
0.5  
10  
8
8
6
5.5  
6
3.5  
6
3.5  
4
3.5  
1.8  
3.5  
1.8  
3
1.8  
1.6  
0.8  
1.2  
0.8  
1.2  
0.8  
0.5  
0.7  
0.7  
0.7  
0.5  
0.5  
0.5  
12  
0.3  
0.15  
0.15  
0.1  
0.15  
0.15  
0.1  
6
6
6
4
3.5  
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
13.2  
13.2  
19.8  
19.8  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.7  
0.7  
1
1.5  
3
1.2  
1.8  
0.8  
0.6  
0.7  
0.5  
0.7  
0.4  
0.3  
0.25  
0.3  
0.22  
0.3  
0.2  
0.15  
0.1  
0.1  
0.15  
0.15  
0.1  
0.1  
8
6
6
4
2
1.5  
1.2  
0.8  
0.6  
0.4  
0.35  
1
1
1.5  
1.5  
2.2  
2.2  
3.3  
3.3  
4.7  
4.7  
6.8  
6.8  
5.4  
10  
47  
47  
68  
68  
68  
100  
150  
150  
220  
220  
330  
0.68  
1
1.5  
2.2  
3.3  
4.7  
6.8  
6.8  
10  
15  
15  
22  
22  
33  
1.1  
0.5  
0.5  
0.5  
0.5  
0.8  
1.1  
1.1  
1.6  
2.4  
3.6  
10  
8
6
3.5  
3.5  
3.5  
1.9  
1.8  
1.8  
1.6  
15  
22  
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Capacitance  
Case Code/  
Case Size  
DC  
Leakage  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Standard ESR  
Low ESR  
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.  
(3) To complete KEMET part number, insert H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
11  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Table 1 – Ratings & Part Number Reference cont'd  
Rated  
Rated  
Case Code/  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
Voltage Capacitance Case Size  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
16  
16  
16  
16  
16  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
35  
35  
35  
35  
22  
33  
47  
D/7343-31  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
A/3216–18  
A/3216–18  
A/3216–18  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
X/7343-43  
A/3216–18  
A/3216–18  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
X/7343-43  
D/7343-31  
X/7343-43  
X/7343-43  
A/3216–18  
A/3216–18  
A/3216–18  
A/3216–18  
T493D226(1)016(2)(3)(4)(5)(6)  
T493D336(1)016(2)(3)(4)(5)(6)  
T493D476(1)016(2)(3)(4)(5)(6)  
T493D686(1)016(2)(3)(4)(5)(6)  
T493X107(1)016(2)(3)(4)(5)(6)  
T493A474(1)020(2)(3)(4)(5)(6)  
T493A684(1)020(2)(3)(4)(5)(6)  
T493A105(1)020(2)(3)(4)(5)(6)  
T493B155(1)020(2)(3)(4)(5)(6)  
T493B225(1)020(2)(3)(4)(5)(6)  
T493B335(1)020(2)(3)(4)(5)(6)  
T493C475(1)020(2)(3)(4)(5)(6)  
T493C685(1)020(2)(3)(4)(5)(6)  
T493C106(1)020(2)(3)(4)(5)(6)  
T493C156(1)020(2)(3)(4)(5)(6)  
T493D156(1)020(2)(3)(4)(5)(6)  
T493D226(1)020(2)(3)(4)(5)(6)  
T493D336(1)020(2)(3)(4)(5)(6)  
T493X476(1)020(2)(3)(4)(5)(6)  
T493X686(1)020(2)(3)(4)(5)(6)  
T493A334(1)025(2)(3)(4)(5)(6)  
T493A474(1)025(2)(3)(4)(5)(6)  
T493A684(1)025(2)(3)(4)(5)(6)  
T493B684(1)025(2)(3)(4)(5)(6)  
T493A105(1)025(2)(3)(4)(5)(6)  
T493B105(1)025(2)(3)(4)(5)(6)  
T493A155(1)025(2)(3)(4)(5)(6)  
T493B155(1)025(2)(3)(4)(5)(6)  
T493B225(1)025(2)(3)(4)(5)(6)  
T493C225(1)025(2)(3)(4)(5)(6)  
T493B335(1)025(2)(3)(4)(5)(6)  
T493C335(1)025(2)(3)(4)(5)(6)  
T493C475(1)025(2)(3)(4)(5)(6)  
T493C685(1)025(2)(3)(4)(5)(6)  
T493D685(1)025(2)(3)(4)(5)(6)  
T493C106(1)025(2)(3)(4)(5)(6)  
T493D106(1)025(2)(3)(4)(5)(6)  
T493C156(1)025(2)(3)(4)(5)(6)  
T493D156(1)025(2)(3)(4)(5)(6)  
T493X156(1)025(2)(3)(4)(5)(6)  
T493D226(1)025(2)(3)(4)(5)(6)  
T493X226(1)025(2)(3)(4)(5)(6)  
T493X336(1)025(2)(3)(4)(5)(6)  
T493A104(1)035(2)(3)(4)(5)(6)  
T493A154(1)035(2)(3)(4)(5)(6)  
T493A224(1)035(2)(3)(4)(5)(6)  
T493A334(1)035(2)(3)(4)(5)(6)  
3.6  
5.3  
7.5  
10.9  
16  
0.5  
0.5  
0.5  
0.5  
0.5  
0.7  
1
6
6
6
6
8
4
4
4
6
6
6
6
6
6
6
6
6
6
4
6
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
4
6
4
4
4
4
0.8  
0.8  
0.8  
0.7  
0.7  
14  
12  
10  
6
3.5  
3.5  
2.4  
1.9  
1.8  
1.7  
1
0.8  
0.8  
0.7  
0.7  
15  
0.25  
0.25  
0.2  
0.15  
0.1  
9
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
68  
100  
0.47  
0.68  
1
1.5  
2.2  
3.3  
4.7  
6.8  
10  
15  
15  
22  
33  
47  
68  
8
5.5  
4.0  
1.5  
1.3  
0.6  
0.6  
0.5  
0.4  
0.35  
0.3  
0.2  
0.15  
0.15  
10  
1.4  
2
3
3
4.4  
6.6  
7.5  
13.6  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.6  
0.6  
0.9  
0.9  
1.2  
1.7  
1.7  
2.5  
2.5  
3.8  
3.8  
3
0.33  
0.47  
0.68  
0.68  
1
14  
9
6
5.5  
4
2
10  
7.5  
8
5
10  
5
4.5  
3.5  
3.5  
2.5  
2.4  
1.9  
1.4  
1.5  
1
1
1.5  
1.5  
2.2  
2.2  
3.3  
3.3  
4.7  
6.8  
6.8  
10  
10  
15  
15  
15  
22  
22  
33  
3
1.5  
1.2  
2.2  
2
1.2  
0.6  
0.6  
1
0.5  
0.4  
0.9  
0.35  
0.2  
0.2  
0.23  
0.3  
10  
1.5  
1
0.7  
0.8  
0.7  
0.7  
20  
19  
5.5  
4.4  
8.3  
0.5  
0.5  
0.5  
0.5  
0.10  
0.15  
0.22  
0.33  
6
6
6
18  
15  
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Capacitance  
Case Code/  
Case Size  
DC  
Leakage  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Standard ESR  
Low ESR  
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.  
(3) To complete KEMET part number, insert H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
12  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Table 1 – Ratings & Part Number Reference cont'd  
Rated  
Rated  
Case Code/  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
Voltage Capacitance Case Size  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
50  
0.47  
0.47  
0.68  
0.68  
1.0  
1.5  
1.5  
2.2  
2.2  
3.3  
4.7  
4.7  
6.8  
10  
A/3216–18  
B/3528-21  
A/3216–18  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
D/7343-31  
X/7343-43  
X/7343-43  
A/3216–18  
A/3216–18  
B/3528-21  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
X/7343-43  
X/7343-43  
T493A474(1)035(2)(3)(4)(5)(6)  
T493B474(1)035(2)(3)(4)(5)(6)  
T493A684(1)035(2)(3)(4)(5)(6)  
T493B684(1)035(2)(3)(4)(5)(6)  
T493B105(1)035(2)(3)(4)(5)(6)  
T493B155(1)035(2)(3)(4)(5)(6)  
T493C155(1)035(2)(3)(4)(5)(6)  
T493B225(1)035(2)(3)(4)(5)(6)  
T493C225(1)035(2)(3)(4)(5)(6)  
T493C335(1)035(2)(3)(4)(5)(6)  
T493C475(1)035(2)(3)(4)(5)(6)  
T493D475(1)035(2)(3)(4)(5)(6)  
T493D685(1)035(2)(3)(4)(5)(6)  
T493D106(1)035(2)(3)(4)(5)(6)  
T493X106(1)035(2)(3)(4)(5)(6)  
T493D156(1)035(2)(3)(4)(5)(6)  
T493X156(1)035(2)(3)(4)(5)(6)  
T493X226(1)035(2)(3)(4)(5)(6)  
T493A104(1)050(2)(3)(4)(5)(6)  
T493A154(1)050(2)(3)(4)(5)(6)  
T493B154(1)050(2)(3)(4)(5)(6)  
T493B224(1)050(2)(3)(4)(5)(6)  
T493B334(1)050(2)(3)(4)(5)(6)  
T493B474(1)050(2)(3)(4)(5)(6)  
T493C474(1)050(2)(3)(4)(5)(6)  
T493C684(1)050(2)(3)(4)(5)(6)  
T493C105(1)050(2)(3)(4)(5)(6)  
T493C155(1)050(2)(3)(4)(5)(6)  
T493D155(1)050(2)(3)(4)(5)(6)  
T493C225(1)050(2)(3)(4)(5)(6)  
T493D225(1)050(2)(3)(4)(5)(6)  
T493D335(1)050(2)(3)(4)(5)(6)  
T493D475(1)050(2)(3)(4)(5)(6)  
T493X475(1)050(2)(3)(4)(5)(6)  
T493X685(1)050(2)(3)(4)(5)(6)  
T493X106(1)050(2)(3)(4)(5)(6)  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.8  
0.8  
1.2  
1.7  
1.7  
2.4  
3.5  
2.8  
5.3  
5.3  
7.7  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.8  
0.8  
1.1  
1.1  
1.7  
2.4  
1.9  
3.5  
5
4
4
4
4
4
6
6
6
6
6
6
6
6
6
4
6
6
6
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
4
6
6
14  
8
10  
6.5  
5
5
4.5  
4
3.5  
2.5  
2.5  
1.5  
1.3  
1
0.9  
0.8  
0.9  
0.7  
20  
19  
16  
14  
10  
9
4
2.5  
6
2.5  
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2.5  
2.5  
1.5  
0.8  
0.6  
0.7  
0.5  
0.3  
0.25  
0.3  
0.3  
0.3  
10  
10  
10  
10  
2.5  
2
1.8  
1.6  
1.6  
1.5  
1
1.5  
0.8  
0.8  
0.6  
0.3  
0.5  
0.4  
10  
15  
15  
22  
0.10  
0.15  
0.15  
0.22  
0.33  
0.47  
0.47  
0.68  
1
1.5  
1.5  
2.2  
2.2  
3.3  
4.7  
4.7  
6.8  
10  
8
7
5.5  
4.5  
3.5  
3.5  
2.5  
2
1.5  
0.9  
1
0.7  
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Capacitance  
Case Code/  
Case Size  
DC  
Leakage  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Standard ESR  
Low ESR  
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.  
(3) To complete KEMET part number, insert H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
13  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Recommended Voltage Derating Guidelines  
1.2  
1
-55°C to 85°C  
85°C to 125°C  
% Change in Working DC  
Voltage with Temperature  
Recommended Maximum  
Application Voltage  
VR  
67% of VR  
0.8  
0.6  
0.4  
0.2  
0
% Change in Working DC Voltage  
with Temperature  
50% of VR  
33% of VR  
67%  
33%  
Recommended Maximum Application  
Voltage (As % of Rated Voltage)  
-55  
25  
85  
125  
Temperature (ºC)  
Ripple Current/Ripple Voltage  
Permissible AC ripple voltage and current are related to equivalent  
series resistance (ESR) and the power dissipation capabilities of  
the device. Permissible AC ripple voltage which may be applied is  
limited by two criteria:  
Maximum Power  
Dissipation (P max)  
mWatts @ 25°C  
w/+20°C Rise  
KEMET  
Case Code  
EIA  
Case Code  
1. The positive peak AC voltage plus the DC bias voltage, if any,  
must not exceed the DC voltage rating of the capacitor.  
2. The negative peak AC voltage in combination with bias  
voltage, if any, must not exceed the allowable limits specified for  
reverse voltage. See the Reverse Voltage section for allowable  
limits.  
The maximum power dissipation by case size can be determined  
using the table at right. The maximum power dissipation rating  
stated in the table must be reduced with increasing environmental  
operating temperatures. Refer to the table below for temperature  
compensation requirements.  
A
B
C
D
X
3216–18  
3528–21  
6032–28  
7343–31  
7343–43  
75  
85  
110  
150  
165  
The maximum power dissipation rating must be reduced with increasing  
environmental operating temperatures. Refer to the Temperature Compensation  
Multiplier table for details.  
Temperature Compensation Multipliers  
for Maximum Ripple Current  
T ≤ 25°C  
T ≤ 85°C  
T ≤ 125°C  
1.00  
0.90  
0.40  
T= Environmental Temperature  
Using the P max of the device, the maximum allowable rms ripple  
current or voltage may be determined.  
I(max) = √P max/R  
E(max) = Z √P max/R  
I = rms ripple current (amperes)  
E = rms ripple voltage (volts)  
R = ESR at specified frequency (ohms)  
Z = Impedance at specified frequency (ohms)  
P max = maximum power dissipation (watts)  
14  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Reverse Voltage  
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The  
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse  
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within  
these limits.  
Temperature  
Permissible Transient Reverse Voltage  
25°C  
85°C  
15% of Rated voltage  
5% of Rated voltage  
1% of Rated voltage  
125°C  
Table 2 – Land Dimensions/Courtyard  
Metric  
Size  
Code  
Density Level A:  
Maximum (Most) Land  
Protrusion (mm)  
Density Level B:  
Median (Nominal) Land  
Protrusion (mm)  
Density Level C:  
Minimum (Least) Land  
Protrusion (mm)  
KEMET  
Case  
EIA  
W
L
S
V1  
V2  
W
L
S
V1  
V2  
W
L
S
V1  
V2  
A
3216–18  
1.35  
2.20  
0.62  
6.02  
2.80  
1.23  
1.80  
0.82  
4.92  
2.30  
1.13  
1.42  
0.98  
4.06  
2.04  
B
C
3528–21  
6032–28  
7343–31  
7343–43  
2.35  
2.35  
2.55  
2.55  
2.21  
2.77  
2.77  
2.77  
0.92  
2.37  
3.67  
3.67  
6.32  
8.92  
4.00  
4.50  
5.60  
5.60  
2.23  
2.23  
2.43  
2.43  
1.80  
2.37  
2.37  
2.37  
1.12  
2.57  
3.87  
3.87  
5.22  
7.82  
9.12  
9.12  
3.50  
4.00  
5.10  
5.10  
2.13  
2.13  
2.33  
2.33  
1.42  
1.99  
1.99  
1.99  
1.28  
2.73  
4.03  
4.03  
4.36  
6.96  
8.26  
8.26  
3.24  
3.74  
4.84  
4.84  
D
10.22  
10.22  
X¹  
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.  
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.  
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification  
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).  
¹ Height of these chips may create problems in wave soldering.  
V1  
L
L
V2  
W
W
S
Grid Placement Courtyard  
15  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Soldering Process  
KEMET’s families of surface mount capacitors are compatible  
with wave (single or dual), convection, IR, or vapor phase reflow  
techniques. Preheating of these components is recommended  
to avoid extreme thermal stress. KEMET's recommended  
profile conditions for convection and IR reflow reflect the profile  
conditions of the IPC/J–STD–020D standard for moisture  
sensitivity testing. The devices can safely withstand a maximum  
of three reflow passes at these conditions.  
Profile Feature  
SnPb Assembly Pb-Free Assembly  
Preheat/Soak  
Temperature Minimum (TSmin  
)
100°C  
150°C  
150°C  
200°C  
Temperature Maximum (TSmax  
)
Time (ts) from Tsmin to Tsmax  
)
60 – 120 seconds  
3°C/seconds maximum  
183°C  
60 – 120 seconds  
3°C/seconds maximum  
217°C  
Ramp-up Rate (TL to TP)  
Liquidous Temperature (TL)  
Time Above Liquidous (tL)  
60 – 150 seconds  
60 – 150 seconds  
220°C*  
235°C**  
250°C*  
260°C**  
Peak Temperature (TP)  
Please note that although the X/7343–43 case size can withstand  
wave soldering, the tall profile (4.3 mm maximum) dictates care in  
wave process development.  
Time within 5°C of Maximum  
20 seconds maximum  
6°C/seconds maximum  
6 minutes maximum  
30 seconds maximum  
6°C/seconds maximum  
8 minutes maximum  
Peak Temperature (tP)  
Ramp-down Rate (TP to TL)  
Time 25°C to Peak Temperature  
Hand soldering should be performed with care due to the difficulty  
in process control. If performed, care should be taken to avoid  
contact of the soldering iron to the molded case. The iron should  
be used to heat the solder pad, applying solder between the pad  
and the termination, until reflow occurs. Once reflow occurs, the  
iron should be removed immediately. “Wiping” the edges of a chip  
and heating the top surface is not recommended.  
Note: All temperatures refer to the center of the package, measured on the  
package body surface that is facing up during assembly reflow.  
*Case Size D, E, P, Y, and X  
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z  
TP  
tP  
Maximum Ramp Up Rate = 3ºC/seconds  
Maximum Ramp Down Rate = 6ºC/seconds  
TL  
tL  
During typical reflow operations, a slight darkening of the gold-  
colored epoxy may be observed. This slight darkening is normal  
and not harmful to the product. Marking permanency is not  
affected by this change.  
T
smax  
T
smin  
tS  
25  
25ºC to Peak  
Time  
Storage  
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other  
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term  
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may  
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%  
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of  
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years  
of receipt.  
16  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR11 Style) – T493 Series COTS Space Grade  
Construction  
Polarity Stripe (+)  
Molded Epoxy  
Case  
Detailed Cross Section  
Silver Paint  
(Fourth Layer)  
Polarity  
Bevel (+)  
Tantalum Wire  
Leadframe  
(- Cathode)  
Washer  
Tantalum Wire  
Weld  
(to attach wire)  
Carbon  
(Third Layer)  
Washer  
Silver Adhesive  
Ta2O5 Dielectric  
(First Layer)  
MnO2  
(Second Layer)  
Leadframe  
(+ Anode)  
Molded Epoxy  
Case  
Tantalum  
Capacitor Marking  
Date Code *  
KEMET  
Space  
Grade MnO2  
1st digit = Last number of Year  
9 = 2009  
Polarity  
0 = 2010  
1 = 2011  
2 = 2012  
3 = 2013  
4 = 2014  
Indicator (+)  
Picofarad  
Code  
2nd and 3rd digit = Week of the Year  
01 = 1st week of the Year to  
52 = 52nd week of the Year  
KEMET  
ID  
Rated  
Voltage  
Date  
Code*  
* 230 = 30th week of 2012  
17  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Fused MnO2 Tantalum Surface Mount Capacitors  
T496 Series Fail-Safe Fused Space Grade  
Overview  
KEMET's Space Grade Series of capacitors are suitable  
for use by defense/aerospace customers in high reliability  
space applications. This series meets the requirements of  
MIL–PRF–55365 as well as MIL–STD–1580. These capacitors  
(B=0.1%/k hours or C=0.01%/k hours), surge current level (10  
cycles -55°C and +85°C before and/or after Weibull grading),  
performance testing level (see chart for details on available  
options), ESR (low and standard), and termination finish (see  
incorporate an intensive testing and screening protocol which is description in each series). Fused versions are available for  
customizable depending upon customer's specific needs. The  
full part number allows for designation of Weibull grading level  
built-in circuit protection, as well as multi-anode designs for very  
low ESR values  
Benefits  
• Internal fuse protects against damaging short circuit failure mode  
• Standard case sizes B, C, D, X per EIA 535BAAC  
• 100% surge current test available  
• Optional gold-plated terminations  
• Operating temperature range of -55˚C to +125˚C  
• Fuse activation, 25˚C: within 1 second at fault currents of  
4 amps and higher  
• Continuous current capability: 0.75 amps  
• Post actuation resistance, 25˚C: 10 MΩ, minimum  
• Test tabs on side of case bypass the capacitor element to  
allow direct testing of the fuse assembly  
• RoHS Compliant and lead-free terminations  
• Weibull Grading C (0.01%/1,000 hours)  
• Capacitance values of 0.15 μF to 470 μF  
• Voltage rating of 4 – 50 VDC  
Environmental Compliance  
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.  
One world. One KEMET  
18  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
SPICE  
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.  
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over  
frequency, temperature, ripple, and DC bias conditions.  
Ordering Information  
T
496  
Series  
Fail  
X
227  
M
010  
Voltage  
004 = 4 V  
C
T
61  
2
A
Capacitor  
Class  
Case  
Size  
Capacitance Capacitance  
Code (pF) Tolerance  
Failure Rate/  
Design  
Lead Material  
Surge  
ESR  
Testing  
T =  
B, C, First two digits K = ±10%  
C =  
C = Hot Solder  
61 = None  
1 = ESR - A = Option A  
Tantalum Safe -  
Space  
D, X  
represent  
significant  
figures. Third  
digit specifies  
number of  
zeros.  
M = ±20% 006 = 6.3 V 0.01%/1,000 Dipped  
62 = 10 Cycles  
Standard B = Option B  
010 = 10 V  
016 = 16 V  
020 = 20 V  
025 = 25 V  
035 = 35 V  
050 = 50 V  
hours  
T = 100% Matte after Weibull,25°C 2 = ESR - C = Option C  
Grade  
Tin (Sn) Plated  
H = Standard  
Solder Coated  
(SnPb 5% Pb  
minimum)  
63 = 10 Cycles,  
after Weibull,-  
55°C and 85°C  
64 = 10 Cycles  
before Weibull,  
-55°C and 85°C  
65 = 10 Cycles  
Before and After  
Weibull, -55°C  
and 85°C  
Low  
Performance Characteristics  
Item  
Performance Characteristics  
Operating Temperature  
Rated Capacitance Range  
Capacitance Tolerance  
Rated Voltage Range  
DF (120 Hz)  
-55°C to 125°C  
0.15 – 470 µF @ 120 Hz/25°C  
K Tolerance (10%), M Tolerance (20%)  
4 – 50 V  
Refer to Part Number Electrical Specification Table  
Refer to Part Number Electrical Specification Table  
≤ 0.01 CV (µA) at rated voltage after 5 minutes  
ESR (100 kHz)  
Leakage Current  
19  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Qualification  
Test  
Condition  
Characteristics  
Within ±10% of initial value  
Within initial limits  
Δ C/C  
DF  
85°C @ rated voltage, 2,000 hours  
125°C @ 2/3 rated voltage, 2,000 hours  
Endurance  
DCL  
ESR  
Δ C/C  
DF  
Within 1.25 x initial limit  
Within initial limits  
Within ±10% of initial value  
Within initial limits  
Storage Life  
125°C @ 0 Volts, 2,000 hours  
DCL  
ESR  
Δ C/C  
DF  
Within 1.25 x initial limit  
Within initial limits  
Within ±5% of initial value  
Within initial limits  
MIL–STD–202, Method 107, Condition B, mounted, -55C° to  
125°C, 1,000 cycles  
Thermal Shock  
DCL  
ESR  
+25°C  
IL*  
Within 1.25 x initial limit  
Within initial limits  
-55°C  
±10%  
IL  
+85°C  
±10%  
+125°C  
±20%  
Extreme temperature exposure at a  
succession of continuous steps at +25ºC,  
-55ºC, +25ºC, +85ºC, +125ºC, +25ºC  
Δ C/C  
Temperature Stability  
DF  
IL  
1.5 x IL  
10 x IL  
1.5 x IL  
12 x IL  
DCL  
IL  
n/a  
Δ C/C  
DF  
Within ±5% of initial value  
Within initial limits  
25°C and 85°C, 1.32 x rated voltage 1,000 cycles.  
(125°C, 1.2 x rated voltage)  
Surge Voltage  
DCL  
ESR  
Δ C/C  
DF  
Within initial limits  
Within initial limits  
Within ±10% of initial value  
Within initial limits  
MIL–STD–202, Method 213, Condition I, 100 G peak.  
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,  
20 G peak  
Mechanical Shock/Vibration  
DCL  
Within initial limits  
*IL = Initial Limit  
Certification  
DSCC Drawing 04053  
20  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Test Methods  
Test Sequence  
Test Method  
Option A Option B Option C  
100% Serialization  
100% IR Reflow  
KEMET Standard  
X
MIL-PRF-55365  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
100% Thermal Shock  
MIL-PRF-55365  
100% Electrical Verification  
KEMET Standard  
Read and Record Attributes/Variables Data  
100% Surge Current, Option C with 5% PDA Calculation  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365 with 5% PDA Calculation  
KEMET Standard  
X
X
X
Read and Record Attributes/Variables Data  
100% Voltage Aging, 10 hours @1.32 Vr  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365  
X
X
X
X
KEMET Standard  
100% Weibull Grading B or C  
MIL-PRF-55365  
X
X
100% Electrical Verification  
KEMET Standard  
Read and Record Attributes/Variables Data  
100% Surge Current, Option A or B with 5% PDA Calculation  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365 with 5% PDA Calculation  
KEMET Standard  
X
X
X
X
Read and Record Attributes/Variables Data  
3 Sigma Screening - All Electricals  
Read and Record Attributes/Variables Data  
Destructive Physical Analysis (DPA) (5 pieces- each lot)  
Group B Testing (22 pieces - each lot)  
Temperature Stability - sample  
KEMET Standard  
KEMET Standard  
X
X
X
KEMET Standard  
MIL-PRF-55365  
X
X
X
X
X
* See Note Below  
MIL-PRF-55365  
X
X
Solderability - Sample  
MIL-PRF-55365  
Group C Testing (57 pieces - each Lot)**  
100% X-ray  
MIL-PRF-55365  
MIL-PRF-55365  
X
X
100% X-ray - 2 Plane***  
MIL-PRF-55365 and KEMET Standard  
MIL-PRF-55365  
X
X
X
X
100% Physical Dimension Verification  
Data Pack  
Group A and C Summaries  
X
X
X
X
X
X
X
2 Plane X-ray JPEG photos  
DPA Report  
Attributes/Variables Data for Cap/Df/DCL/ESR  
X = Included in test option  
* Group B Testing = 10,000 Cycles Surge Current, 85°C, 40% Vr  
** Group C Post Moisture ESR limit = 1.25 initial limit  
*** 2 Plane X-ray = Top and side views, molded case wall thickness minimum 0.005" on all sides, negative/positive termination attachment criteria per MIL- STD-1580  
21  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Electrical Characteristics  
ESR vs. Frequency  
Capacitance vs. Frequency  
1,000  
1000  
100  
10  
T496B106M016ATE3K5  
T496B106M016ATE3K5_IMP  
T496D476M016ATE400_IMP  
T496X107M016ATE700_IMP  
T496B106M016ATE3K5_ESR  
T496D476M016ATE400_ESR  
T496X107M016ATE700_ESR  
T496D476M016ATE400  
T496X107M016ATE700  
100  
10  
1
1
0
0.1  
100  
1,000  
10,000  
Frequency (Hz)  
100,000  
1,000,000  
10,000,000  
100  
1,000  
10,000  
100,000  
1,000,000  
10,000,000  
Frequency (Hz)  
Dimensions – Millimeters (Inches)  
Metric will govern  
CATHODE (-) END VIEW  
W
SIDE VIEW  
ANODE (+) END VIEW  
BOTTOM VIEW  
A
B
B
H
E
F
P
Termination cutout  
at KEMET's option,  
either end  
X
T
S
G
S
R
L
Case Size  
Component  
F* ±0.1 S* ±0.3 B* ±0.15  
±(.004) ±(.012) (Ref) ±.006  
KEMET EIA  
L*  
W*  
H*  
X (Ref)  
P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)  
3.5 ±0.2  
2.8 ±0.2  
1.9 ±0.2  
0.10 ±0.10  
(0.004 ±0.004)  
3528–21  
2.2 (.087) 0.8 (.031)  
2.2 (.087) 1.3 (.051)  
2.4 (.094) 1.3 (.051)  
2.4 (.094) 1.3 (.051)  
0.4 (.016)  
0.5 (.020)  
0.5 (.020)  
0.5 (.020)  
0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.1 (.043) 1.8 (0.071) 2.2 (0.087)  
0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 2.5(.098) 2.8 (0.110) 2.4 (0.094)  
0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)  
1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)  
B
(0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008)  
6.0 ±0.3 3.2 ±0.3 2.5 ±0.3  
(0.236 ±0.03) (0.126 ±0.012) (0.098 ±0.012)  
7.3 ± 0.3 4.3 ± 0.3 2.8 ± 0.3  
(0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012)  
7.3 ±0.3 4.3 ±0.3 4.0 ±0.3  
(0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012)  
0.10 ±0.10  
(0.004 ±0.004)  
6032–28  
C
0.10 ±0.10  
(0.004 ±0.004)  
7343–31  
D
0.10 ±0.10  
(0.004 ±0.004)  
7343–43  
X
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch.  
* MIL–C–55365/8 specified dimensions  
22  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Table 1 – Ratings & Part Number Reference  
Rated  
Rated  
Case Code/  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
Voltage Capacitance Case Size  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
4
4
4
4
4
4
4
4
68  
100  
150  
150  
220  
330  
330  
470  
4.7  
6.8  
10  
22  
15  
22  
33  
47  
47  
68  
68  
100  
100  
100  
150  
150  
220  
220  
330  
3.3  
4.7  
6.8  
10  
15  
15  
22  
33  
33  
47  
47  
68  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
X/7343-43  
B/3528-21  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
X/7343-43  
D/7343-31  
X/7343-43  
X/7343-43  
D/7343-31  
X/7343-43  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
D/7343-31  
X/7343-43  
D/7343-31  
X/7343-43  
D/7343-31  
X/7343-43  
X/7343-43  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
T496C686(1)004(2)(3)(4)(5)(6)  
T496C107(1)004(2)(3)(4)(5)(6)  
T496C157(1)004(2)(3)(4)(5)(6)  
T496D157(1)004(2)(3)(4)(5)(6)  
T496D227(1)004(2)(3)(4)(5)(6)  
T496D337(1)004(2)(3)(4)(5)(6)  
T496X337(1)004(2)(3)(4)(5)(6)  
T496X477(1)004(2)(3)(4)(5)(6)  
T496B475(1)006(2)(3)(4)(5)(6)  
T496B685(1)006(2)(3)(4)(5)(6)  
T496B106(1)006(2)(3)(4)(5)(6)  
T496B226(1)006(2)(3)(4)(5)(6)  
T496C156(1)006(2)(3)(4)(5)(6)  
T496C226(1)006(2)(3)(4)(5)(6)  
T496C336(1)006(2)(3)(4)(5)(6)  
T496C476(1)006(2)(3)(4)(5)(6)  
T496D476(1)006(2)(3)(4)(5)(6)  
T496C686(1)006(2)(3)(4)(5)(6)  
T496D686(1)006(2)(3)(4)(5)(6)  
T496C107(1)006(2)(3)(4)(5)(6)  
T496D107(1)006(2)(3)(4)(5)(6)  
T496X107(1)006(2)(3)(4)(5)(6)  
T496D157(1)006(2)(3)(4)(5)(6)  
T496X157(1)006(2)(3)(4)(5)(6)  
T496X227(1)006(2)(3)(4)(5)(6)  
T496D227(1)006(2)(3)(4)(5)(6)  
T496X337(1)006(2)(3)(4)(5)(6)  
T496B335(1)010(2)(3)(4)(5)(6)  
T496B475(1)010(2)(3)(4)(5)(6)  
T496B685(1)010(2)(3)(4)(5)(6)  
T496C106(1)010(2)(3)(4)(5)(6)  
T496B156(1)010(2)(3)(4)(5)(6)  
T496C156(1)010(2)(3)(4)(5)(6)  
T496C226(1)010(2)(3)(4)(5)(6)  
T496C336(1)010(2)(3)(4)(5)(6)  
T496D336(1)010(2)(3)(4)(5)(6)  
T496C476(1)010(2)(3)(4)(5)(6)  
T496D476(1)010(2)(3)(4)(5)(6)  
T496D686(1)010(2)(3)(4)(5)(6)  
T496X686(1)010(2)(3)(4)(5)(6)  
T496D107(1)010(2)(3)(4)(5)(6)  
T496X107(1)010(2)(3)(4)(5)(6)  
T496D157(1)010(2)(3)(4)(5)(6)  
T496X157(1)010(2)(3)(4)(5)(6)  
T496X227(1)010(2)(3)(4)(5)(6)  
T496B225(1)016(2)(3)(4)(5)(6)  
T496B335(1)016(2)(3)(4)(5)(6)  
T496B475(1)016(2)(3)(4)(5)(6)  
T496C685(1)016(2)(3)(4)(5)(6)  
2.7  
4
6
6
8
8
8
8
8
8
8
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
6
6
6
6
1.6  
1.2  
1.2  
0.8  
0.7  
0.7  
0.7  
0.5  
3.5  
3.5  
3.5  
3.5  
2
2
2
1.6  
1
1.2  
1
0.4  
0.8  
0.9  
0.7  
0.3  
0.7  
0.7  
0.5  
3.5  
3.5  
3.5  
2
3.5  
2
2
1.6  
1
1.2  
1
0.4  
N/A  
N/A  
N/A  
0.4  
0.4  
N/A  
N/A  
N/A  
N/A  
N/A  
1.5  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
8.8  
13.2  
13.2  
18.8  
0.5  
0.5  
0.6  
1.3  
0.9  
1.4  
2
2.9  
2.9  
4.1  
4.1  
6
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
16  
16  
16  
16  
N/A  
N/A  
0.6  
0.6  
N/A  
N/A  
N/A  
N/A  
0.4  
0.3  
0.3  
N/A  
0.3  
0.3  
0.3  
N/A  
N/A  
N/A  
N/A  
N/A  
0.6  
0.5  
0.4  
0.4  
0.4  
0.4  
0.4  
N/A  
0.4  
N/A  
0.4  
0.4  
0.3  
3.5  
2.1  
6
6
9
9
13.2  
13.2  
19.8  
0.5  
0.5  
0.7  
1
1.5  
1.5  
2.2  
3.3  
3.3  
4.7  
4.7  
6.8  
6.8  
10  
10  
15  
15  
22  
0.5  
0.5  
0.8  
1.1  
0.8  
0.9  
0.7  
0.4  
0.7  
0.7  
0.5  
3.5  
3.5  
3.5  
2
68  
100  
100  
150  
150  
220  
2.2  
3.3  
4.7  
6.8  
1.6  
0.6  
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Capacitance  
Case Code/  
Case Size  
DC  
Leakage  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Standard ESR  
Low ESR  
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.  
(3) To complete KEMET part number, insert C= Hot Solder Dipped, H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
23  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Table 1 – Ratings & Part Number Reference cont'd  
Rated  
Rated  
Case Code/  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
Voltage Capacitance Case Size  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
16  
16  
16  
16  
16  
16  
16  
16  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
35  
50  
50  
50  
50  
50  
50  
10  
15  
22  
22  
33  
47  
47  
68  
1.5  
2.2  
4.7  
6.8  
10  
15  
15  
22  
33  
33  
0.68  
1
1.5  
2.2  
3.3  
4.7  
4.7  
6.8  
10  
15  
15  
22  
22  
0.47  
0.68  
1
1.5  
2.2  
3.3  
4.7  
6.8  
10  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
D/7343-31  
B/3528-21  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
C/6032-28  
B/3528-21  
C/6032-28  
C/6032-28  
D/7343-31  
C/6032-28  
D/7343-31  
D/7343-31  
X/7343-43  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
D/7343-31  
X/7343-43  
B/3528-21  
B/3528-21  
B/3528-21  
C/6032-28  
C/6032-28  
C/6032-28  
T496C106(1)016(2)(3)(4)(5)(6)  
T496C156(1)016(2)(3)(4)(5)(6)  
T496C226(1)016(2)(3)(4)(5)(6)  
T496D226(1)016(2)(3)(4)(5)(6)  
T496D336(1)016(2)(3)(4)(5)(6)  
T496D476(1)016(2)(3)(4)(5)(6)  
T496X476(1)016(2)(3)(4)(5)(6)  
T496D686(1)016(2)(3)(4)(5)(6)  
T496B155(1)020(2)(3)(4)(5)(6)  
T496B225(1)020(2)(3)(4)(5)(6)  
T496C475(1)020(2)(3)(4)(5)(6)  
T496C685(1)020(2)(3)(4)(5)(6)  
T496C106(1)020(2)(3)(4)(5)(6)  
T496C156(1)020(2)(3)(4)(5)(6)  
T496D156(1)020(2)(3)(4)(5)(6)  
T496D226(1)020(2)(3)(4)(5)(6)  
T496D336(1)020(2)(3)(4)(5)(6)  
T496X336(1)020(2)(3)(4)(5)(6)  
T496B684(1)025(2)(3)(4)(5)(6)  
T496B105(1)025(2)(3)(4)(5)(6)  
T496B155(1)025(2)(3)(4)(5)(6)  
T496C225(1)025(2)(3)(4)(5)(6)  
T496C335(1)025(2)(3)(4)(5)(6)  
T496B475(1)025(2)(3)(4)(5)(6)  
T496C475(1)025(2)(3)(4)(5)(6)  
T496C685(1)025(2)(3)(4)(5)(6)  
T496D106(1)025(2)(3)(4)(5)(6)  
T496C156(1)025(2)(3)(4)(5)(6)  
T496D156(1)025(2)(3)(4)(5)(6)  
T496D226(1)025(2)(3)(4)(5)(6)  
T496X226(1)025(2)(3)(4)(5)(6)  
T496B474(1)035(2)(3)(4)(5)(6)  
T496B684(1)035(2)(3)(4)(5)(6)  
T496B105(1)035(2)(3)(4)(5)(6)  
T496C155(1)035(2)(3)(4)(5)(6)  
T496C225(1)035(2)(3)(4)(5)(6)  
T496C335(1)035(2)(3)(4)(5)(6)  
T496D475(1)035(2)(3)(4)(5)(6)  
T496D685(1)035(2)(3)(4)(5)(6)  
T496D106(1)035(2)(3)(4)(5)(6)  
T496X106(1)035(2)(3)(4)(5)(6)  
T496D156(1)035(2)(3)(4)(5)(6)  
T496X156(1)035(2)(3)(4)(5)(6)  
T496B154(1)050(2)(3)(4)(5)(6)  
T496B224(1)050(2)(3)(4)(5)(6)  
T496B334(1)050(2)(3)(4)(5)(6)  
T496C474(1)050(2)(3)(4)(5)(6)  
T496C684(1)050(2)(3)(4)(5)(6)  
T496C105(1)050(2)(3)(4)(5)(6)  
1.6  
2.4  
3.6  
3.6  
5.3  
7.5  
7.5  
10.9  
0.5  
0.5  
1
6
6
6
6
6
6
6
8
6
6
6
6
6
6
6
6
6
6
4
4
6
6
6
6
6
6
6
6
6
6
6
4
4
4
6
6
6
6
6
6
6
6
6
4
4
4
4
4
4
2
2
1.6  
1
0.7  
0.6  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.5  
0.4  
0.4  
0.4  
N/A  
N/A  
1.6  
N/A  
0.6  
0.8  
N/A  
0.5  
0.5  
0.4  
0.4  
N/A  
3.5  
1.6  
N/A  
2.1  
N/A  
1.3  
0.6  
0.6  
N/A  
0.5  
0.4  
0.4  
2.6  
N/A  
3.1  
2.6  
1.6  
0.9  
0.7  
0.75  
N/A  
0.5  
N/A  
0.9  
N/A  
10  
1
0.8  
0.9  
0.4  
5
3.5  
2
2
2
0.5  
1
1
1.4  
2
3
3
4.4  
6.6  
6.6  
0.5  
0.5  
0.5  
0.6  
0.9  
1.2  
1.2  
1.7  
2.5  
3.8  
3.8  
5.5  
5.5  
0.5  
0.5  
0.5  
0.5  
0.8  
1.2  
1.7  
2.4  
3.5  
3.5  
5.3  
5.3  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.4  
0.9  
6.5  
5
5
3.5  
2.5  
4
2.5  
2
1.2  
0.75  
1
0.8  
0.9  
8
6.5  
5
4.5  
3.5  
2.5  
1.5  
1.3  
0.5  
1
0.5  
0.9  
16  
14  
10  
8
10  
15  
15  
0.15  
0.22  
0.33  
0.47  
0.68  
1
2.6  
1.9  
1.7  
2.7  
7
5.5  
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Capacitance  
Case Code/  
Case Size  
DC  
Leakage  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Standard ESR  
Low ESR  
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.  
(3) To complete KEMET part number, insert C= Hot Solder Dipped, H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
24  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Table 1 – Ratings & Part Number Reference cont'd  
Rated  
Rated  
Case Code/  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
Voltage Capacitance Case Size  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
50  
50  
50  
50  
50  
1.5  
2.2  
3.3  
4.7  
4.7  
C/6032-28  
D/7343-31  
D/7343-31  
D/7343-31  
X/7343-43  
T496C155(1)050(2)(3)(4)(5)(6)  
T496D225(1)050(2)(3)(4)(5)(6)  
T496D335(1)050(2)(3)(4)(5)(6)  
T496D475(1)050(2)(3)(4)(5)(6)  
T496X475(1)050(2)(3)(4)(5)(6)  
0.8  
1.1  
1.7  
2.4  
2.4  
6
6
6
6
5
2.5  
2
0.4  
1.5  
2
0.9  
1
N/A  
0.4  
1
1
1
1
1
6
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Capacitance  
Case Code/  
Case Size  
DC  
Leakage  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Standard ESR  
Low ESR  
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.  
(3) To complete KEMET part number, insert C= Hot Solder Dipped, H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
25  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Recommended Voltage Derating Guidelines  
1.2  
1
-55°C to 85°C  
85°C to 125°C  
% Change in Working DC  
Voltage with Temperature  
Recommended Maximum  
Application Voltage  
VR  
67% of VR  
0.8  
0.6  
0.4  
0.2  
0
% Change in Working DC Voltage  
with Temperature  
50% of VR  
33% of VR  
67%  
33%  
Recommended Maximum Application  
Voltage (As % of Rated Voltage)  
-55  
25  
85  
125  
Temperature (ºC)  
Ripple Current/Ripple Voltage  
Permissible AC ripple voltage and current are related to equivalent  
series resistance (ESR) and the power dissipation capabilities of  
the device. Permissible AC ripple voltage which may be applied is  
limited by two criteria:  
Maximum Power  
Dissipation (P max)  
mWatts @ 25°C  
w/+20°C Rise  
KEMET  
Case Code  
EIA  
Case Code  
1. The positive peak AC voltage plus the DC bias voltage, if any,  
must not exceed the DC voltage rating of the capacitor.  
2. The negative peak AC voltage in combination with bias  
voltage, if any, must not exceed the allowable limits specified for  
reverse voltage. See the Reverse Voltage section for allowable  
limits.  
The maximum power dissipation by case size can be determined  
using the table at right. The maximum power dissipation rating  
stated in the table must be reduced with increasing environmental  
operating temperatures. Refer to the table below for temperature  
compensation requirements.  
B
C
D
X
3528–21  
6032–28  
7343–31  
7343–43  
85  
110  
150  
165  
The maximum power dissipation rating must be reduced with increasing  
environmental operating temperatures. Refer to the Temperature Compensation  
Multiplier table for details.  
Temperature Compensation Multipliers  
for Maximum Ripple Current  
T ≤ 25°C  
T ≤ 85°C  
T ≤ 125°C  
1.00  
0.90  
0.40  
T= Environmental Temperature  
Using the P max of the device, the maximum allowable rms ripple  
current or voltage may be determined.  
I(max) = √P max/R  
E(max) = Z √P max/R  
I = rms ripple current (amperes)  
E = rms ripple voltage (volts)  
R = ESR at specified frequency (ohms)  
Z = Impedance at specified frequency (ohms)  
P max = maximum power dissipation (watts)  
26  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Reverse Voltage  
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The  
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse  
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within  
these limits.  
Temperature  
Permissible Transient Reverse Voltage  
25°C  
85°C  
15% of Rated Voltage  
5% of Rated Voltage  
1% of Rated Voltage  
125°C  
Table 2 – Land Dimensions/Courtyard  
Metric  
Size  
Code  
Density Level A:  
Maximum (Most) Land  
Protrusion (mm)  
Density Level B:  
Median (Nominal) Land  
Protrusion (mm)  
Density Level C:  
Minimum (Least) Land  
Protrusion (mm)  
KEMET  
Case  
EIA  
W
L
S
V1  
V2  
W
L
S
V1  
V2  
W
L
S
V1  
V2  
B
3528–21  
2.35  
2.21  
0.92  
6.32  
4.00  
2.23  
1.80  
1.12  
5.22  
3.50  
2.13  
1.42  
1.28  
4.36  
3.24  
C
D
6032–28  
7343–31  
7343–43  
2.35  
2.55  
2.55  
2.77  
2.77  
2.77  
2.37  
3.67  
3.67  
8.92  
10.22  
10.22  
4.50  
5.60  
5.60  
2.23  
2.43  
2.43  
2.37  
2.37  
2.37  
2.57  
3.87  
3.87  
7.82  
9.12  
9.12  
4.00  
5.10  
5.10  
2.13  
2.33  
2.33  
1.99  
1.99  
1.99  
2.73  
4.03  
4.03  
6.96  
8.26  
8.26  
3.74  
4.84  
4.84  
X¹  
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.  
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.  
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification  
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).  
¹ Height of these chips may create problems in wave soldering.  
V1  
L
L
V2  
W
W
S
Grid Placement Courtyard  
27  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Soldering Process  
KEMET’s families of surface mount capacitors are compatible  
Profile Feature  
SnPb Assembly Pb-Free Assembly  
with wave (single or dual), convection, IR, or vapor phase reflow  
techniques. Preheating of these components is recommended  
to avoid extreme thermal stress. KEMET's recommended profile  
conditions for convection and IR reflow reflect the profile conditions  
of the IPC/J–STD–020D standard for moisture sensitivity testing.  
The devices can safely withstand a maximum of three reflow  
passes at these conditions.  
Preheat/Soak  
Temperature Minimum (TSmin  
)
100°C  
150°C  
150°C  
200°C  
Temperature Maximum (TSmax  
)
Time (ts) from Tsmin to Tsmax  
)
60 – 120 seconds  
3°C/seconds maximum  
183°C  
60 – 120 seconds  
3°C/seconds maximum  
217°C  
Ramp-up Rate (TL to TP)  
Liquidous Temperature (TL)  
Time Above Liquidous (tL)  
60 – 150 seconds  
60 – 150 seconds  
220°C*  
235°C**  
250°C*  
260°C**  
Peak Temperature (TP)  
Please note that although the X/7343–43 case size can withstand  
wave soldering, the tall profile (4.3 mm maximum) dictates care in  
wave process development.  
Time within 5°C of Maximum  
20 seconds maximum  
6°C/seconds maximum  
6 minutes maximum  
30 seconds maximum  
6°C/seconds maximum  
8 minutes maximum  
Peak Temperature (tP)  
Ramp-down Rate (TP to TL)  
Time 25°C to Peak Temperature  
Hand soldering should be performed with care due to the difficulty  
in process control. If performed, care should be taken to avoid  
contact of the soldering iron to the molded case. The iron should  
be used to heat the solder pad, applying solder between the pad  
and the termination, until reflow occurs. Once reflow occurs, the  
iron should be removed immediately. “Wiping” the edges of a chip  
and heating the top surface is not recommended.  
Note: All temperatures refer to the center of the package, measured on the  
package body surface that is facing up during assembly reflow.  
*Case Size D, E, P, Y, and X  
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z  
TP  
tP  
Maximum Ramp Up Rate = 3ºC/seconds  
Maximum Ramp Down Rate = 6ºC/seconds  
TL  
tL  
During typical reflow operations, a slight darkening of the gold-  
colored epoxy may be observed. This slight darkening is normal  
and not harmful to the product. Marking permanency is not  
affected by this change.  
T
smax  
T
smin  
tS  
25  
25ºC to Peak  
Time  
Storage  
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other  
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term  
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may  
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%  
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of  
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years  
of receipt.  
28  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Fused MnO2 Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade  
Construction  
Molded Epoxy  
Case  
Polarity Stripe (+)  
Detailed Cross Section  
Silver Paint  
(Fourth Layer)  
Polarity  
Bevel (+)  
Tantalum Wire  
Leadframe  
(- Cathode)  
Washer  
Tantalum Wire  
Weld  
(to attach wire)  
Fuse  
Carbon  
(Third Layer)  
Washer  
Silver Adhesive  
Ta2O5 Dielectric  
(First Layer)  
MnO2  
(Second Layer)  
Leadframe  
(+ Anode)  
Molded Epoxy  
Case  
Tantalum  
Capacitor Marking  
Date Code *  
1st digit = Last number of Year  
9 = 2009  
KEMET  
Space Grade  
Fused MnO2  
Polarity  
0 = 2010  
1 = 2011  
2 = 2012  
3 = 2013  
4 = 2014  
Indicator (+)  
Picofarad  
Code  
2nd and 3rd digit = Week of the Year  
01 = 1st week of the Year to  
52 = 52nd week of the Year  
KEMET  
ID  
Rated  
Voltage  
Date  
Code*  
* 230 = 30th week of 2012  
29  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
High Reliability COTS (CWR09/19/29 Style)  
T497 Series High Grade COTS Space Grade  
Overview  
KEMET's Space Grade Series of capacitors are suitable  
for use by defense/aerospace customers in high reliability  
space applications. This series meets the requirements of  
MIL–PRF–55365 as well as MIL–STD–1580. These capacitors  
(B=0.1%/k hours or C=0.01%/k hours), surge current level (10  
cycles -55°C and +85°C before and/or after Weibull grading),  
performance testing level (see chart for details on available  
options), ESR (low and standard), and termination finish (see  
incorporate an intensive testing and screening protocol which is description in each series). Fused versions are available for  
customizable depending upon customer's specific needs. The  
full part number allows for designation of Weibull grading level  
built-in circuit protection, as well as multi-anode designs for very  
low ESR values.  
Benefits  
• Low profile case sizes  
• 100% thermal shock  
• 100% surge current test available on all case sizes  
• Various termination finishes available  
• Weibull Grading C (0.01%/1,000 hours)  
• Operating temperature range of -55˚C to +125˚C  
• Capacitance values of 0.1 μF to 150 μF  
• Voltage rating of 4 – 50 VDC  
Applications  
Typical applications include decoupling and filtering in medical, defense, and aerospace applications.  
Environmental Compliance  
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.  
One world. One KEMET  
30  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
SPICE  
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The  
KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency,  
temperature, ripple, and DC bias conditions.  
Ordering Information  
T
497  
Series  
High  
226  
K
020  
C
H
2
G
61  
A
Capacitor  
Class  
Case  
Size  
Capacitance Capacitance  
Code (pF)  
Failure Rate/  
Design  
Voltage  
Lead Material  
Surge  
ESR  
Testing  
Tolerance  
T =  
A, B,  
C, D,  
First two  
digits  
K = ±10% 004 = 4 V  
M = ±20% 006 = 6.3 V 0.01%/1,000 Dipped  
C =  
C = Hot Solder 61 = None  
62 = 10 Cycles  
1 = ESR - A = Option A  
Standard B = Option B  
Tantalum Grade  
- Space E, F,  
represent  
significant  
figures. Third  
digit specifies  
number of  
zeros.  
010 = 10 V  
015 = 15 V  
020 = 20 V  
025 = 25 V  
035 = 35 V  
050 = 50 V  
hours  
T = 100% Matte after Weibull,25°C 2 = ESR - C = Option C  
Grade  
G, H,  
X
Tin (Sn) Plated 63 = 10 Cycles,  
Low  
H = Standard  
Solder Coated  
(SnPb 5% Pb  
minimum)  
after Weibull,-55°C  
and 85°C  
64 = 10 Cycles  
before Weibull,  
B = Gold Plated -55°C and 85°C  
65 = 10 Cycles  
Before and After  
Weibull, -55°C and  
85°C  
Performance Characteristics  
Item  
Performance Characteristics  
Operating Temperature  
Rated Capacitance Range  
Capacitance Tolerance  
Rated Voltage Range  
DF (120 Hz)  
-55°C to 125°C  
0.1 – 150 µF @ 120 Hz/25°C  
K Tolerance (10%), M Tolerance (20%)  
4 – 50 V  
Refer to Part Number Electrical Specification Table  
Refer to Part Number Electrical Specification Table  
≤ 0.01CV (µA) at rated voltage after 5 minutes  
ESR (100 kHz)  
Leakage Current  
31  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Qualification  
Test  
Condition  
Characteristics  
Within -20%/+10% of initial value  
≤ Initial Limit  
Δ C/C  
DF  
105°C @ rated voltage, 2,000 hours  
125°C @ 2/3 rated voltage, 2,000 hours  
Endurance  
DCL  
ESR  
Δ C/C  
DF  
2 x IL @ 125ºC  
2 x Initial Limit  
Within -20%/+10% of initial value  
Within initial limits  
Storage Life  
Humidity  
125°C @ 0 volts, 2,000 hours  
DCL  
ESR  
Δ C/C  
DF  
Within 2.0 x initial limit  
Within 2.0 x initial limit  
Within -5%/+35% of initial value  
≤ Initial Limit  
85°C, 85% RH, 1,000 hours, No Load  
DCL  
+25°C  
IL*  
Within 3.0 x initial limit  
-55°C  
±20%  
IL  
+85°C  
±20%  
+125°C  
±30%  
Extreme temperature exposure at a  
succession of continuous steps at +25ºC,  
-55ºC, +25ºC, +85ºC, +125ºC, +25ºC  
Δ C/C  
DF  
Temperature Stability  
IL  
1.2 x IL  
10 x IL  
1.5 x IL  
10 x IL  
DCL  
IL  
n/a  
Δ C/C  
DF  
Within -20%/+10% of initial value  
Within initial limits  
Surge Voltage  
105°C, 1.32 x rated voltage 1,000 cycles  
DCL  
ESR  
Δ C/C  
DF  
Within initial limits  
Within initial limits  
Within ±10% of initial value  
Within initial limits  
MIL–STD–202, Method 213, Condition I, 100 G peak.  
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,  
20 G peak  
Mechanical Shock/Vibration  
DCL  
Within initial limits  
*IL = Initial Limit  
32  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Test Methods  
Test Sequence  
Test Method  
Option A Option B Option C  
100% Serialization  
100% IR Reflow  
KEMET Standard  
X
MIL-PRF-55365  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
100% Thermal Shock  
MIL-PRF-55365  
100% Electrical Verification  
KEMET Standard  
Read and Record Attributes/Variables Data  
100% Surge Current, Option C with 5% PDA Calculation  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365 with 5% PDA Calculation  
KEMET Standard  
X
X
X
Read and Record Attributes/Variables Data  
100% Voltage Aging, 10 hours @1.32 Vr  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365  
X
X
X
X
KEMET Standard  
100% Weibull Grading B or C  
MIL-PRF-55365  
X
X
100% Electrical Verification  
KEMET Standard  
Read and Record Attributes/Variables Data  
100% Surge Current, Option A or B with 5% PDA Calculation  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365 with 5% PDA Calculation  
KEMET Standard  
X
X
X
X
Read and Record Attributes/Variables Data  
3 Sigma Screening - All Electricals  
Read and Record Attributes/Variables Data  
Destructive Physical Analysis (DPA) (5 pieces- each lot)  
Group B Testing (22 pieces - each lot)  
Temperature Stability - sample  
KEMET Standard  
KEMET Standard  
X
X
X
KEMET Standard  
MIL-PRF-55365  
X
X
X
X
X
* See Note Below  
MIL-PRF-55365  
X
X
Solderability - Sample  
MIL-PRF-55365  
Group C Testing (57 pieces - each Lot)**  
100% X-ray  
MIL-PRF-55365  
MIL-PRF-55365  
X
X
100% X-ray - 2 Plane***  
MIL-PRF-55365 and KEMET Standard  
MIL-PRF-55365  
X
X
X
X
100% Physical Dimension Verification  
Data Pack  
Group A and C Summaries  
X
X
X
X
X
X
X
2 Plane X-ray JPEG photos  
DPA Report  
Attributes/Variables Data for Cap/Df/DCL/ESR  
X = Included in test option  
* Group B Testing = 10,000 Cycles Surge Current, 85°C, 40% Vr  
** Group C Post Moisture ESR limit = 1.25 initial limit  
*** 2 Plane X-ray = Top and side views, molded case wall thickness minimum 0.005" on all sides, negative/positive termination attachment criteria per MIL- STD-1580  
33  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Electrical Characteristics  
ESR vs. Frequency  
Capacitance vs. Frequency  
1000  
100  
10  
1,000  
100  
10  
T497D106/15  
T497D106/15_IMP  
T497F336/15_IMP  
T497H107/15_IMP  
T497D106/15_ESR  
T497F336/15_ESR  
T497F107/15_ESR  
T497F336/15  
T497H107/15  
1
1
0.1  
0
100  
1,000  
10,000  
100,000  
1,000,000  
10,000,000  
100  
1,000  
10,000  
100,000  
1,000,000  
10,000,000  
Frequency (Hz)  
Frequency (Hz)  
Dimensions – Millimeters (Inches)  
Metric will govern  
SIDE VIEW  
END VIEW  
BOTTOM VIEW  
L
W
Termination cutout  
at KEMET's option,  
either end  
Solderable  
Surfaces  
H
H2  
½ H2 Min.  
W2  
P
P
Case Size  
Component  
P +0.25 (0.010),  
-0.13 (0.005)  
KEMET  
L* ±0.38 (0.015)  
2.54 (.100)  
3.81 (.150)  
5.08 (.200)  
3.81 (.150)  
5.08 (.200)  
5.59 (.220)  
6.73 (.265)  
7.24 (.285)  
6.93 (.273)  
W* ±0.38 (0.015)  
1.27 (.050)  
1.27 (.050)  
1.27 (.050)  
2.54 (.100)  
2.54 (.100)  
3.43 (.135)  
2.79 (.110)  
3.81 (.150)  
5.41 (.213)  
H* ±0.38 (0.015)  
1.27 (.050)  
1.27 (.050)  
1.27 (.050)  
1.27 (.050)  
1.27 (.050)  
1.78 (.070)  
2.79 (.110)  
2.79 (.110)  
2.74 (.108)  
W2  
H2 Minimum  
1.27 ±0.13  
(0.050 ±0.005)  
1.27 ±0.13  
(0.050 ±0.005)  
1.27 ±0.13  
A
B
C
D
E
F
0.76 (.030)  
0.76 (0.030)  
0.76 (0.030)  
0.76 (0.030)  
0.76 (0.030)  
0.76 (0.030)  
1.02 (0.040)  
1.52 (0.060)  
1.52 (0.060)  
1.22 (0.048)  
0.76 (.030)  
0.76 (.030)  
0.76 (.030)  
0.76 (.030)  
0.76 (.030)  
1.27 (.050)  
1.27 (.050)  
1.19 (.047)  
(0.050 ±0.005)  
2.41 +0.13, -0.25  
(0.095 +0.005, -0.010)  
2.41 +0.13, -0.25  
(0.095 +0.005, -0.010)  
3.30 ±0.13  
(0.130 ±0.005)  
2.67 ±0.13  
(0.105 ±0.005)  
3.68 +0.013, -0.51  
(0.145 +0.005, -0.020)  
3.05 ±0.13  
G
H
X
(0.120 ±0.005)  
Note: When solder coated terminations are required, add an additional 0.38 mm (0.015 inch) to the above tolerances for "L", "W", "H", "P" ,"W2" and "H2"  
34  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Table 1 – Ratings & Part Number Reference  
Rated  
Voltage  
Rated  
Cap  
Case Code/  
Case Size  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2.2  
3.3  
4.7  
6.8  
4.7  
10  
15  
6.8  
10  
22  
33  
15  
33  
47  
68  
33  
100  
68  
150  
100  
220  
330  
1.5  
3.3  
4.7  
3.3  
6.8  
10  
A/1005  
A/1005  
A/1005  
A/1005  
B/1505  
B/1505  
B/1505  
C/2005  
D/1510  
D/1510  
D/1510  
E/2010  
E/2010  
E/2010  
E/2010  
F/2214  
F/2214  
G/2711  
G/2711  
H/2915  
H/2915  
H/2915  
A/1005  
A/1005  
A/1005  
B/1505  
B/1505  
B/1505  
B/1505  
C/2005  
D/1510  
D/1510  
D/1510  
E/2010  
E/2010  
E/2010  
E/2010  
F/2214  
F/2214  
F/2214  
G/2711  
G/2711  
G/2711  
G/2711  
H/2915  
H/2915  
H/2915  
T497A225(1)004(2)(3)(4)(5)(6)  
T497A335(1)004(2)(3)(4)(5)(6)  
T497A475(1)004(2)(3)(4)(5)(6)  
T497A685(1)004(2)(3)(4)(5)(6)  
T497B475(1)004(2)(3)(4)(5)(6)  
T497B106(1)004(2)(3)(4)(5)(6)  
T497B156(1)004(2)(3)(4)(5)(6)  
T497C685(1)004(2)(3)(4)(5)(6)  
T497D106(1)004(2)(3)(4)(5)(6)  
T497D226(1)004(2)(3)(4)(5)(6)  
T497D336(1)004(2)(3)(4)(5)(6)  
T497E156(1)004(2)(3)(4)(5)(6)  
T497E336(1)004(2)(3)(4)(5)(6)  
T497E476(1)004(2)(3)(4)(5)(6)  
T497E686(1)004(2)(3)(4)(5)(6)  
T497F336(1)004(2)(3)(4)(5)(6)  
T497F107(1)004(2)(3)(4)(5)(6)  
T497G686(1)004(2)(3)(4)(5)(6)  
T497G157(1)004(2)(3)(4)(5)(6)  
T497H107(1)004(2)(3)(4)(5)(6)  
T497H227(1)004(2)(3)(4)(5)(6)  
T497H337(1)004(2)(3)(4)(5)(6)  
T497A155(1)006(2)(3)(4)(5)(6)  
T497A335(1)006(2)(3)(4)(5)(6)  
T497A475(1)006(2)(3)(4)(5)(6)  
T497B335(1)006(2)(3)(4)(5)(6)  
T497B685(1)006(2)(3)(4)(5)(6)  
T497B106(1)006(2)(3)(4)(5)(6)  
T497B156(1)006(2)(3)(4)(5)(6)  
T497C475(1)006(2)(3)(4)(5)(6)  
T497D685(1)006(2)(3)(4)(5)(6)  
T497D156(1)006(2)(3)(4)(5)(6)  
T497D226(1)006(2)(3)(4)(5)(6)  
T497E106(1)006(2)(3)(4)(5)(6)  
T497E156(1)006(2)(3)(4)(5)(6)  
T497E226(1)006(2)(3)(4)(5)(6)  
T497E336(1)006(2)(3)(4)(5)(6)  
T497F226(1)006(2)(3)(4)(5)(6)  
T497F476(1)006(2)(3)(4)(5)(6)  
T497F686(1)006(2)(3)(4)(5)(6)  
T497G476(1)006(2)(3)(4)(5)(6)  
T497G686(1)006(2)(3)(4)(5)(6)  
T497G107(1)006(2)(3)(4)(5)(6)  
T497G157(1)006(2)(3)(4)(5)(6)  
T497H686(1)006(2)(3)(4)(5)(6)  
T497H227(1)006(2)(3)(4)(5)(6)  
T497H337(1)006(2)(3)(4)(5)(6)  
1
1
1
1
1
1
1
1
1
1
2
1
2
2
3
2
4
3
6
4
8
10  
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
3
4
3
4
6
10  
4
10  
20  
6
6
6
6
6
8
8
6
8
8
8
8
8
8
8
8
10  
10  
10  
10  
10  
10  
6
6
6
6
6
6
8
6
6
8
6
8
8
8
6
8
8
10  
10  
10  
10  
10  
10  
10  
10  
8
12  
12  
12  
8
8
8
5.5  
4
4
4
3.5  
3
3
3
2.2  
2
1.1  
1
0.9  
1
0.9  
8
12  
12  
8
8
8
8
5.5  
4.5  
5
5
3.5  
3
3.5  
3.5  
2.2  
3.5  
1.5  
1.1  
1
1.1  
1.1  
0.9  
0.9  
0.9  
4
6
6
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
3.2  
3.2  
3.2  
2.2  
1.3  
1.3  
1.3  
1
0.9  
0.9  
0.9  
0.6  
0.55  
0.275  
0.25  
0.18  
0.2  
0.18  
4
4
4
4
4
4
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6.3  
6
6
3.2  
3.2  
3.2  
3.2  
2.2  
1.5  
1.7  
1.7  
1
0.9  
1
1
15  
4.7  
6.8  
15  
22  
10  
15  
22  
33  
22  
47  
68  
47  
68  
100  
150  
68  
220  
330  
0.6  
1
0.4  
0.275  
0.25  
0.275  
0.275  
0.18  
0.18  
0.18  
Ω @ +20ºC  
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Cap  
Case Code/  
Case Size  
DC  
Leakage  
Standard  
ESR  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Low ESR  
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1000Hrs). Designates Reliability Level.  
(3) To complete KEMET part number, insert C = Hot Solder Dipped, B = Gold Plated, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
35  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Table 1 – Ratings & Part Number Reference cont'd  
Rated  
Voltage  
Rated  
Cap  
Case Code/  
Case Size  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
1
2.2  
3.3  
2.2  
4.7  
6.8  
3.3  
4.7  
6.8  
10  
4.7  
6.8  
10  
15  
6.8  
10  
15  
15  
33  
47  
33  
47  
68  
100  
47  
100  
150  
220  
150  
0.68  
1.5  
2.2  
1.5  
2.2  
3.3  
4.7  
6.8  
4.7  
6.8  
10  
15  
22  
33  
22  
33  
47  
33  
A/1005  
A/1005  
A/1005  
B/1505  
B/1505  
B/1505  
C/2005  
C/2005  
C/2005  
C/2005  
D/1510  
D/1510  
D/1510  
D/1510  
E/2010  
E/2010  
E/2010  
F/2214  
F/2214  
F/2214  
G/2711  
G/2711  
G/2711  
G/2711  
H/2915  
H/2915  
H/2915  
H/2915  
X/2824  
A/1005  
A/1005  
A/1005  
B/1505  
C/2005  
D/1510  
D/1510  
D/1510  
E/2010  
E/2010  
F/2214  
F/2214  
F/2214  
F/2214  
G/2711  
G/2711  
G/2711  
H/2915  
T497A105(1)010(2)(3)(4)(5)(6)  
T497A225(1)010(2)(3)(4)(5)(6)  
T497A335(1)010(2)(3)(4)(5)(6)  
T497B225(1)010(2)(3)(4)(5)(6)  
T497B475(1)010(2)(3)(4)(5)(6)  
T497B685(1)010(2)(3)(4)(5)(6)  
T497C335(1)010(2)(3)(4)(5)(6)  
T497C475(1)010(2)(3)(4)(5)(6)  
T497C685(1)010(2)(3)(4)(5)(6)  
T497C106(1)010(2)(3)(4)(5)(6)  
T497D475(1)010(2)(3)(4)(5)(6)  
T497D685(1)010(2)(3)(4)(5)(6)  
T497D106(1)010(2)(3)(4)(5)(6)  
T497D156(1)010(2)(3)(4)(5)(6)  
T497E685(1)010(2)(3)(4)(5)(6)  
T497E106(1)010(2)(3)(4)(5)(6)  
T497E156(1)010(2)(3)(4)(5)(6)  
T497F156(1)010(2)(3)(4)(5)(6)  
T497F336(1)010(2)(3)(4)(5)(6)  
T497F476(1)010(2)(3)(4)(5)(6)  
T497G336(1)010(2)(3)(4)(5)(6)  
T497G476(1)010(2)(3)(4)(5)(6)  
T497G686(1)010(2)(3)(4)(5)(6)  
T497G107(1)010(2)(3)(4)(5)(6)  
T497H476(1)010(2)(3)(4)(5)(6)  
T497H107(1)010(2)(3)(4)(5)(6)  
T497H157(1)010(2)(3)(4)(5)(6)  
T497H227(1)010(2)(3)(4)(5)(6)  
T497X157(1)010(2)(30(4)(5)(6)  
T497A684(1)015(2)(3)(4)(5)(6)  
T497A155(1)015(2)(3)(4)(5)(6)  
T497A225(1)015(2)(3)(4)(5)(6)  
T497B155(1)015(2)(3)(4)(5)(6)  
T497C225(1)015(2)(3)(4)(5)(6)  
T497D335(1)015(2)(3)(4)(5)(6)  
T497D475(1)015(2)(3)(4)(5)(6)  
T497D685(1)015(2)(3)(4)(5)(6)  
T497E475(1)015(2)(3)(4)(5)(6)  
T497E685(1)015(2)(3)(4)(5)(6)  
T497F106(1)015(2)(3)(4)(5)(6)  
T497F156(1)015(2)(3)(4)(5)(6)  
T497F226(1)015(2)(3)(4)(5)(6)  
T497F336(1)015(2)(3)(4)(5)(6)  
T497G226(1)015(2)(3)(4)(5)(6)  
T497G336(1)015(2)(3)(4)(5)(6)  
T497G476(1)015(2)(3)(4)(5)(6)  
T497H336(1)015(2)(3)(4)(5)(6)  
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
2
3
4
3
4
6
10  
5
10  
15  
20  
15  
1
1
1
1
1
1
1
1
1
1
2
2
3
5
4
6
10  
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
6
6
6
6
6
6
6
6
6
8
6
8
8
6
6
8
8
8
10  
12  
12  
8
8
8
5.5  
5.5  
5.5  
5.5  
4.5  
5
5
6
6
3.2  
3.2  
3.2  
2.2  
2.2  
2.2  
2.2  
1.5  
1.7  
1.3  
1.7  
1
1
0.9  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
5
3.5  
3.5  
3
2.5  
1.5  
1.5  
1.1  
1
1.1  
1.1  
0.9  
0.9  
0.9  
0.9  
0.9  
12  
15  
15  
8
5.5  
5
6
6
4
3
2.5  
3
3
3
0.7  
0.4  
0.4  
0.275  
0.25  
0.275  
0.275  
0.18  
0.18  
0.18  
0.18  
0.065  
6
7.5  
7.5  
3.2  
2.2  
1.7  
2
2
1.2  
0.9  
0.667  
0.8  
0.8  
0.8  
0.275  
0.275  
0.275  
0.18  
Ω @ +20ºC  
1.1  
1.1  
1.1  
0.9  
Ω @ +20ºC  
µA @ +20ºC  
% @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Cap  
Case Code/  
Case Size  
DC  
Leakage  
Standard  
ESR  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Low ESR  
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1000Hrs). Designates Reliability Level.  
(3) To complete KEMET part number, insert C = Hot Solder Dipped, B = Gold Plated, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
36  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Table 1 – Ratings & Part Number Reference cont'd  
Rated  
Voltage  
Rated  
Cap  
Case Code/  
Case Size  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
15  
15  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
20  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
25  
35  
35  
35  
35  
35  
35  
35  
35  
35  
50  
50  
47  
68  
0.47  
0.68  
1
1.5  
2.2  
3.3  
3.3  
4.7  
6.8  
6.8  
10  
15  
22  
22  
33  
47  
0.68  
1
H/2915  
H/2915  
A/1005  
B/1505  
B/1505  
C/2005  
D/1510  
D/1510  
E/2010  
E/2010  
E/2010  
F/2214  
F/2214  
G/2711  
G/2711  
H/2915  
H/2915  
X/2824  
B/1505  
B/1505  
C/2005  
D/1510  
D/1510  
E/2010  
E/2010  
F/2214  
F/2214  
G/2711  
G/2711  
G/2711  
G/2711  
H/2915  
H/2915  
H/2915  
X/2824  
X/2824  
B/1505  
C/2005  
D/1510  
E/2010  
F/2214  
G/2711  
H/2915  
H/2915  
X/2824  
A/1005  
B/1505  
T497H476(1)015(2)(3)(4)(5)(6)  
T497H686(1)015(2)(3)(4)(5)(6)  
T497A474(1)020(2)(3)(4)(5)(6)  
T497B684(1)020(2)(3)(4)(5)(6)  
T497B105(1)020(2)(3)(4)(5)(6)  
T497C155(1)020(2)(3)(4)(5)(6)  
T497D225(1)020(2)(3)(4)(5)(6)  
T497D335(1)020(2)(3)(4)(5)(6)  
T497E335(1)020(2)(3)(4)(5)(6)  
T497E475(1)020(2)(3)(4)(5)(6)  
T497E685(1)020(2)(3)(4)(5)(6)  
T497F685(1)020(2)(3)(4)(5)(6)  
T497F106(1)020(2)(3)(4)(5)(6)  
T497G156(1)020(2)(3)(4)(5)(6)  
T497G226(1)020(2)(3)(4)(5)(6)  
T497H226(1)020(2)(3)(4)(5)(6)  
T497H336(1)020(2)(3)(4)(5)(6)  
T497X476(1)020(2)(3)(4)(5)(6)  
T497B684(1)025(2)(3)(4)(5)(6)  
T497B105(1)025(2)(3)(4)(5)(6)  
T497C105(1)025(2)(3)(4)(5)(6)  
T497D155(1)025(2)(3)(4)(5)(6)  
T497D225(1)025(2)(3)(4)(5)(6)  
T497E225(1)025(2)(3)(4)(5)(6)  
T497E335(1)025(2)(3)(4)(5)(6)  
T497F475(1)025(2)(3)(4)(5)(6)  
T497F685(1)025(2)(3)(4)(5)(6)  
T497G685(1)025(2)(3)(4)(5)(6)  
T497G106(1)025(2)(3)(4)(5)(6)  
T497G156(1)025(2)(3)(4)(5)(6)  
T497G226(1)025(2)(3)(4)(5)(6)  
T497H156(1)025(2)(3)(4)(5)(6)  
T497H226(1)025(2)(3)(4)(5)(6)  
T497H336(1)025(2)(3)(4)(5)(6)  
T497X226(1)025(2)(3)(4)(5)(6)  
T497X336(1)025(2)(3)(4)(5)(6)  
T497B474(1)035(2)(3)(4)(5)(6)  
T497C684(1)035(2)(3)(4)(5)(6)  
T497D105(1)035(2)(3)(4)(5)(6)  
T497E155(1)035(2)(3)(4)(5)(6)  
T497F335(1)035(2)(3)(4)(5)(6)  
T497G475(1)035(2)(3)(4)(5)(6)  
T497H685(1)035(2)(3)(4)(5)(6)  
T497H106(1)035(2)(3)(4)(5)(6)  
T497X156(1)035(2)(3)(4)(5)(6)  
T497A104(1)050(2)(3)(4)(5)(6)  
T497B224(1)050(2)(3)(4)(5)(6)  
10  
10  
1
1
1
1
1
1
1
1
2
2
2
3
4
4
6
10  
1
1
1
1
1
1
1
2
2
2
3
4
6
4
6
10  
6
10  
1
1
1
1
1
2
3
4
6
1
1
8
8
8
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
6
8
6
6
6
6
6
6
6
8
6
6
6
0.9  
0.9  
14  
10  
12  
6
5
6
4
6
5
2.4  
3
1.1  
2.5  
0.9  
0.9  
0.9  
7.5  
10  
6.5  
6.5  
6
0.18  
0.18  
7.5  
5.6  
4.8  
2.4  
1.7  
2
1.2  
1.7  
1.5  
0.7  
0.8  
0.275  
0.625  
0.18  
0.18  
0.11  
4
4
2.6  
1.7  
2
1
1.2  
0.7  
0.8  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.5  
2.2  
2.2  
3.3  
4.7  
6.8  
6.8  
10  
15  
22  
15  
22  
3.5  
4
2.5  
3
1.2  
1.4  
1.4  
1.4  
1
0.9  
0.9  
0.9  
0.9  
10  
0.3  
0.35  
0.35  
0.35  
0.2  
0.18  
0.18  
0.16  
0.13  
6.8  
4
2.2  
1.3  
0.7  
0.375  
0.5  
0.5  
0.19  
12  
6.8  
33  
22  
33  
0.47  
0.68  
1
1.5  
3.3  
4.7  
6.8  
10  
8
6.5  
4.5  
2.5  
1.5  
1.3  
0.9  
0.9  
22  
15  
0.1  
0.22  
14  
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Cap  
Case Code/  
Case Size  
DC  
Leakage  
Standard  
ESR  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Low ESR  
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1000Hrs). Designates Reliability Level.  
(3) To complete KEMET part number, insert C = Hot Solder Dipped, B = Gold Plated, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
37  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Table 1 – Ratings & Part Number Reference cont'd  
Rated  
Voltage  
Rated  
Cap  
Case Code/  
Case Size  
DC  
Leakage  
µA @ +20ºC  
Standard  
ESR  
Moisture  
Sensitivity  
Temperature  
KEMET Part Number  
DF  
Low ESR  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
≤ 260ºC  
50  
50  
50  
50  
50  
50  
50  
50  
0.33  
0.47  
0.68  
1
1.5  
2.2  
3.3  
4.7  
B/1505  
C/2005  
D/1510  
E/2010  
F/2214  
F/2214  
G/2711  
H/2915  
T497B334(1)050(2)(3)(4)(5)(6)  
T497C474(1)050(2)(3)(4)(5)(6)  
T497D684(1)050(2)(3)(4)(5)(6)  
T497E105(1)050(2)(3)(4)(5)(6)  
T497F155(1)050(2)(3)(4)(5)(6)  
T497F225(1)050(2)(3)(4)(5)(6)  
T497G335(1)050(2)(3)(4)(5)(6)  
T497H475(1)050(2)(3)(4)(5)(6)  
1
1
1
1
1
2
2
3
6
6
6
6
6
6
6
6
12  
8
7
6
4
2.5  
2
1.5  
4.8  
3.2  
2.3  
1.7  
1.1  
0.7  
0.5  
0.5  
1
1
1
1
1
1
1
1
µA @ +20ºC  
% @ +20ºC  
Ω @ +20ºC  
Ω @ +20ºC  
Temperature  
≤ 260ºC  
(See below for  
part options)  
V
µF  
KEMET/EIA  
Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum  
Rated  
Voltage  
Rated  
Cap  
Case Code/  
Case Size  
DC  
Leakage  
Standard  
ESR  
Moisture  
Sensitivity  
KEMET Part Number  
DF  
Low ESR  
(1) To complete KEMET part number, insert M for ± 20%, K for ± 10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C (0.01%/1000Hrs). Designates Reliability Level.  
(3) To complete KEMET part number, insert C = Hot Solder Dipped, B = Gold Plated, H = Solder Plated, or T = 100% Tin (Sn). Designates Termination Finish.  
(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.  
(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
Refer to Ordering Information for additional detail.  
38  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Recommended Voltage Derating Guidelines  
120%  
100%  
80%  
60%  
40%  
20%  
0%  
-55°C to 85°C  
85°C to 125°C  
% Change in Working DC  
Voltage with Temperature  
Recommended Maximum  
Application Voltage  
VR  
67% of VR  
50% of VR  
33% of VR  
% Change in Working DC Voltage  
with Temperature  
67%  
33%  
Recommended Maximum  
Application Voltage (As %  
of Rated Voltage)  
-55  
25  
85  
125  
Temperature (ºC)  
Ripple Current/Ripple Voltage  
Permissible AC ripple voltage and current are related to equivalent  
series resistance (ESR) and the power dissipation capabilities of  
the device. Permissible AC ripple voltage which may be applied is  
limited by two criteria:  
1. The positive peak AC voltage plus the DC bias voltage, if any,  
must not exceed the DC voltage rating of the capacitor.  
2. The negative peak AC voltage in combination with bias  
voltage, if any, must not exceed the allowable limits specified for  
reverse voltage. See the Reverse Voltage section for allowable  
limits.  
The maximum power dissipation by case size can be determined  
using the table at right. The maximum power dissipation rating  
stated in the table must be reduced with increasing environmental  
operating temperatures. Refer to the table below for temperature  
compensation requirements.  
Maximum Power  
Dissipation (P max)  
mWatts @ 25°C  
w/+20°C Rise  
KEMET  
Case Code  
EIA  
Case Code  
A
B
C
D
E
F
1005  
1505  
2005  
1510  
2010  
2214  
2711  
2915  
50  
70  
75  
80  
90  
100  
125  
150  
G
H
The maximum power dissipation rating must be reduced with increasing  
environmental operating temperatures. Refer to the Temperature Compensation  
Multiplier table for details.  
Temperature Compensation Multipliers  
for Maximum Ripple Current  
T ≤ 25°C  
T ≤ 85°C  
T ≤ 125°C  
1.00  
0.90  
0.40  
T= Environmental Temperature  
Using the P max of the device, the maximum allowable rms ripple  
current or voltage may be determined.  
I(max) = √P max/R  
E(max) = Z √P max/R  
I = rms ripple current (amperes)  
E = rms ripple voltage (volts)  
R = ESR at specified frequency (ohms)  
Z = Impedance at specified frequency (ohms)  
P max = maximum power dissipation (watts)  
39  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Reverse Voltage  
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The  
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse  
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within  
these limits.  
Temperature  
Permissible Transient Reverse Voltage  
25°C  
85°C  
15% of Rated Voltage  
5% of Rated Voltage  
1% of Rated Voltage  
125°C  
Table 2 – Land Dimensions/Courtyard  
Metric  
Size  
Density Level A:  
Maximum (Most)  
Density Level B:  
Median (Nominal)  
Density Level C:  
Minimum (Least)  
KEMET  
Code  
Land Protrusion (mm)  
Land Protrusion (mm)  
Land Protrusion (mm)  
Case  
EIA  
W
L
S
V1  
V2  
W
L
S
V1  
V2  
W
L
S
V1  
V2  
A¹  
1005  
1.35  
2.20  
0.62  
6.02  
2.80  
1.23  
1.80  
0.82  
4.92  
2.30  
1.13  
1.42  
0.98  
4.06  
2.04  
B
C
D
E
F
1505  
2005  
1510  
2010  
2214  
2711  
2915  
2824  
2.35  
2.35  
2.55  
4.25  
2.30  
2.81  
2.81  
2.73  
2.21  
2.77  
2.77  
2.77  
3.47  
2.84  
3.84  
3.22  
0.92  
2.37  
3.67  
3.67  
2.98  
3.10  
3.61  
3.46  
6.32  
8.92  
4.00  
4.50  
5.60  
7.30  
4.82  
4.18  
5.20  
6.80  
2.23  
2.23  
2.43  
4.13  
1.90  
2.41  
2.41  
2.33  
1.80  
2.37  
2.37  
2.37  
3.35  
2.72  
3.72  
3.10  
1.12  
2.57  
3.87  
3.87  
3.18  
3.30  
3.81  
3.66  
5.22  
7.82  
9.12  
9.12  
7.48  
8.62  
9.14  
8.82  
3.50  
4.00  
5.10  
6.80  
4.32  
3.68  
4.70  
6.30  
2.13  
2.13  
2.33  
4.03  
1.52  
2.03  
2.03  
1.95  
1.42  
1.99  
1.99  
1.99  
3.25  
2.62  
3.62  
3.00  
1.28  
2.73  
4.03  
4.03  
3.34  
3.46  
3.97  
3.82  
4.36  
6.96  
8.26  
8.26  
6.62  
7.76  
8.28  
7.96  
3.24  
3.74  
4.84  
6.54  
4.06  
3.42  
4.44  
6.04  
10.22  
10.22  
8.58  
G
H
X
9.72  
10.24  
9.92  
Density Level A: For low-density Product applications. Recommended for wave solder applications and provides a wider process window for reflow solder  
processes.  
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.  
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification  
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).  
1 Land pattern geometry is too small for silkscreen outline.  
V1  
L
L
V2  
W
W
S
Grid Placement Courtyard  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
40  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Soldering Process  
KEMET’s families of surface mount capacitors are compatible  
Profile Feature  
SnPb Assembly Pb-Free Assembly  
with wave (single or dual), convection, IR, or vapor phase reflow  
techniques. Preheating of these components is recommended  
to avoid extreme thermal stress. KEMET's recommended  
profile conditions for convection and IR reflow reflect the profile  
conditions of the IPC/J–STD–020D standard for moisture  
sensitivity testing. The devices can safely withstand a maximum  
of three reflow passes at these conditions.  
Preheat/Soak  
Temperature Minimum (TSmin  
)
100°C  
150°C  
150°C  
200°C  
Temperature Maximum (TSmax  
)
Time (ts) from Tsmin to Tsmax  
)
60 – 120 seconds  
3°C/seconds maximum  
183°C  
60 – 120 seconds  
3°C/seconds maximum  
217°C  
Ramp-up Rate (TL to TP)  
Liquidous Temperature (TL)  
Time Above Liquidous (tL)  
60 – 150 seconds  
60 – 150 seconds  
220°C*  
235°C**  
250°C*  
260°C**  
Peak Temperature (TP)  
Please note that although the X/7343–43 case size can withstand  
wave soldering, the tall profile (4.3 mm maximum) dictates care in  
wave process development.  
Time within 5°C of Maximum  
20 seconds maximum  
6°C/seconds maximum  
6 minutes maximum  
30 seconds maximum  
6°C/seconds maximum  
8 minutes maximum  
Peak Temperature (tP)  
Ramp-down Rate (TP to TL)  
Time 25°C to Peak Temperature  
Hand soldering should be performed with care due to the difficulty  
in process control. If performed, care should be taken to avoid  
contact of the soldering iron to the molded case. The iron should  
be used to heat the solder pad, applying solder between the pad  
and the termination, until reflow occurs. Once reflow occurs, the  
iron should be removed immediately. “Wiping” the edges of a chip  
and heating the top surface is not recommended.  
Note: All temperatures refer to the center of the package, measured on the  
package body surface that is facing up during assembly reflow.  
*Case Size D, E, P, Y, and X  
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z  
TP  
tP  
Maximum Ramp Up Rate = 3ºC/seconds  
Maximum Ramp Down Rate = 6ºC/seconds  
TL  
tL  
During typical reflow operations, a slight darkening of the gold-  
colored epoxy may be observed. This slight darkening is normal  
and not harmful to the product. Marking permanency is not  
affected by this change.  
T
smax  
T
smin  
tS  
25  
25ºC to Peak  
Time  
Storage  
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other  
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term  
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may  
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%  
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of  
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years  
of receipt.  
41  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
High Reliability COTS (CWR09/19/29 Style) – T497 Series High Grade COTS Space Grade  
Construction  
Molded Epoxy  
Case  
Polarity Stripe (+)  
Detailed Cross Section  
Silver Paint  
(Fourth Layer)  
Tantalum Wire  
Leadframe  
(- Cathode)  
Washer  
Tantalum Wire  
Weld  
(to attach wire)  
Carbon  
(Third Layer)  
Washer  
Silver Adhesive  
Ta2O5 Dielectric  
(First Layer)  
MnO2  
(Second Layer)  
Leadframe  
(+ Anode)  
Molded Epoxy  
Case  
Tantalum  
Capacitor Marking  
KEMET High  
Capacitance,  
Low ESR  
Date Code *  
Polarity  
Indicator (+)  
1st digit = Last number of Year  
9 = 2009  
0 = 2010  
1 = 2011  
2 = 2012  
3 = 2013  
4 = 2014  
Picofarad  
Code  
KEMET  
ID  
Rated  
Voltage  
2nd and 3rd digit = Week of the Year  
01 = 1st week of the Year to  
52 = 52nd week of the Year  
Date  
Code*  
* 230 = 30th week of 2012  
42  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Low ESR MnO2 Tantalum Surface Mount Capacitors  
T510 Series Multiple Anode Low ESR Space Grade  
Overview  
KEMET's Space Grade Series of capacitors are suitable  
for use by defense/aerospace customers in high reliability  
space applications. This series meets the requirements of  
MIL–PRF–55365 as well as MIL–STD–1580. These capacitors  
(B=0.1%/k hours or C=0.01%/k hours), surge current level (10  
cycles -55°C and +85°C before and/or after Weibull grading),  
performance testing level (see chart for details on available  
options), ESR (low and standard), and termination finish (see  
incorporate an intensive testing and screening protocol which is description in each series). Fused versions are available for  
customizable depending upon customer's specific needs. The  
full part number allows for designation of Weibull grading level  
built-in circuit protection, as well as multi-anode designs for very  
low ESR values.  
Benefits  
• ESR as low as 18 mΩ  
• High ripple current capability  
• RoHS Compliant and lead-free terminations  
• 100% steady-state accelerated aging  
• 100% surge current test  
• Meets or exceeds EIA standard 535BAAC  
• Taped and reeled per EIA 481  
• Weibull Grading C (0.01%/1,000 hours)  
• Operating temperature range of -55˚C to +125˚C  
Applications  
Typical applications include decoupling and filtering in defense and aerospace end applications, such as DC/DC converters, portable  
electronics, telecommunications, and control units requiring high ripple current capability.  
Environmental Compliance  
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.  
One world. One KEMET  
43  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade  
SPICE  
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.  
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over  
frequency, temperature, ripple, and DC bias conditions.  
Ordering Information  
T
510  
X
477  
M
006  
C
T
61  
1
A
Capacitor  
Class  
Case Capacitance Capacitance  
Size Code (pF) Tolerance  
Failure Rate/  
Design  
Series  
Voltage  
Lead Material  
Surge  
ESR  
Testing  
T =  
Tantalum  
Ultra  
Low  
ESR -  
Space  
Grade  
E, X First two digits K = ±10% 004 = 4 V  
C =  
C = Hot Solder 61 = None  
1 = ESR - A = Option A  
represent  
significant  
figures. Third  
digit specifies  
number of  
zeros.  
M = ±20% 006 = 6.3 V 0.01%/1,000 Dipped  
010 = 10 V hours T = 100%  
62 = 10 Cycles after Standard B = Option B  
Weibull,25°C  
Matte Tin (Sn) 63 = 10 Cycles, after  
C = Option C  
Plated  
Weibull,-55°C and  
H = Standard 85°C  
Solder Coated 64 = 10 Cycles  
(SnPb 5% Pb before Weibull,  
minimum)  
-55°C and 85°C  
65 = 10 Cycles  
Before and After  
Weibull, -55°C and  
85°C  
Performance Characteristics  
Item  
Performance Characteristics  
Operating Temperature  
Rated Capacitance Range  
Capacitance Tolerance  
Rated Voltage Range  
DF (120 Hz)  
-55°C to 125°C  
10 – 1,000 µF @ 120 Hz/25°C  
K Tolerance (10%), M Tolerance (20%)  
4 – 10 V  
Refer to Part Number Electrical Specification Table  
Refer to Part Number Electrical Specification Table  
≤ 0.01 CV (µA) at rated voltage after 5 minutes  
ESR (100 kHz)  
Leakage Current  
44  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade  
Qualification  
Test  
Condition  
Characteristics  
Within ±10% of initial value  
Within initial limits  
Δ C/C  
DF  
85°C @ rated voltage, 2,000 hours  
125°C @ 2/3 rated voltage, 2,000 hours  
Endurance  
DCL  
ESR  
Δ C/C  
DF  
Within 1.25 x initial limit  
Within initial limits  
Within ±10% of initial value  
Within initial limits  
Storage Life  
125°C @ 0 volts, 2,000 hours  
DCL  
ESR  
Δ C/C  
DF  
Within 1.25 x initial limit  
Within initial limits  
Within ±5% of initial value  
Within initial limits  
MIL–STD–202, Method 107, Condition B, mounted, -55ºC to  
125°C, 1,000 cycles  
Thermal Shock  
DCL  
ESR  
+25°C  
IL*  
Within 1.25 x initial limit  
Within initial limits  
-55°C  
±10%  
IL  
+85°C  
±10%  
+125°C  
±20%  
Extreme temperature exposure at a  
succession of continuous steps at +25ºC,  
-55ºC, +25ºC, +85ºC, +125ºC, +25ºC  
Δ C/C  
Temperature Stability  
DF  
IL  
1.5 x IL  
10 x IL  
1.5 x IL  
12 x IL  
DCL  
IL  
n/a  
Δ C/C  
DF  
Within ±5% of initial value  
Within initial limits  
25°C and 85°C, 1.32 x rated voltage 1,000 cycles.  
(125°C, 1.2 x rated voltage)  
Surge Voltage  
DCL  
ESR  
Δ C/C  
DF  
Within initial limits  
Within initial limits  
Within ±10% of initial value  
Within initial limits  
MIL–STD–202, Method 213, Condition I, 100 G peak.  
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,  
20 G peak  
Mechanical Shock/Vibration  
DCL  
Within initial limits  
*IL = Initial limit  
45  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade  
Test Methods  
Test Sequence  
Test Method  
Option A Option B Option C  
100% Serialization  
100% IR Reflow  
KEMET Standard  
X
MIL-PRF-55365  
MIL-PRF-55365  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
100% Thermal Shock  
100% Electrical Verification  
KEMET Standard  
Read and Record Attributes/Variables Data  
100% Surge Current, Option C with 5% PDA Calculation  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365 with 5% PDA Calculation  
KEMET Standard  
X
X
X
Read and Record Attributes/Variables Data  
100% Voltage Aging, 10 hours @1.32 Vr  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365  
X
X
X
X
KEMET Standard  
100% Weibull Grading B or C  
MIL-PRF-55365  
X
X
100% Electrical Verification  
KEMET Standard  
Read and Record Attributes/Variables Data  
100% Surge Current, Option A or B with 5% PDA Calculation  
100% Electrical Verification  
KEMET Standard  
MIL-PRF-55365 with 5% PDA Calculation  
KEMET Standard  
X
X
X
X
Read and Record Attributes/Variables Data  
3 Sigma Screening - All Electricals  
Read and Record Attributes/Variables Data  
Destructive Physical Analysis (DPA) (5 pieces- each lot)  
Group B Testing (22 pieces - each lot)  
Temperature Stability - sample  
KEMET Standard  
KEMET Standard  
X
X
X
KEMET Standard  
MIL-PRF-55365  
X
X
X
X
X
* See Note Below  
MIL-PRF-55365  
X
X
Solderability - Sample  
MIL-PRF-55365  
Group C Testing (57 pieces - each Lot)**  
100% X-ray  
MIL-PRF-55365  
MIL-PRF-55365  
X
X
100% X-ray - 2 Plane***  
MIL-PRF-55365 and KEMET Standard  
MIL-PRF-55365  
X
X
X
X
100% Physical Dimension Verification  
Data Pack  
Group A and C Summaries  
X
X
X
X
X
X
X
2 Plane X-ray JPEG photos  
DPA Report  
Attributes/Variables Data for Cap/Df/DCL/ESR  
X = Included in test option  
* Group B Testing = 10,000 Cycles Surge Current, 85°C, 40% Vr  
** Group C Post Moisture ESR limit = 1.25 initial limit  
*** 2 Plane X-ray = Top and side views, molded case wall thickness minimum 0.005" on all sides, negative/positive termination attachment criteria per MIL- STD-1580  
46  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade  
Electrical Characteristics  
Impedance, ESR vs. Frequency  
Capacitance vs. Frequency  
100  
10  
100  
10  
1
T510X226M035ATE100_IMP  
T510X336M035ATE065_IMP  
T510E476M035ATE050_IMP  
T510X226M035ATE100_ESR  
T510X336M035ATE065_ESR  
T510E476M035ATE050_ESR  
1
T510X226M035ATE100  
T510X336M035ATE065  
T510E476M035ATE050  
0.1  
0.01  
100  
1,000  
10,000  
100,000  
1,000,000  
10,000,000  
100  
1,000  
10,000  
100,000  
1,000,000  
10,000,000  
Frequency (Hz)  
Frequency (Hz)  
Dimensions – Millimeters (Inches)  
Metric will govern  
CATHODE (-) END VIEW  
W
SIDE VIEW  
ANODE (+) END VIEW  
BOTTOM VIEW  
A
B
B
H
E
F
P
Termination cutout  
at KEMET's option,  
either end  
X
T
S
G
S
R
L
Case Size  
Component  
F* ±0.1 S* ±0.3 B* ±0.15  
±(.004) ±(.012) (Ref) ±.006  
KEMET EIA  
L*  
W*  
H*  
X (Ref)  
P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)  
7.3 ±0.3  
4.3 ±0.3  
4.0 ±0.3  
0.10 ± 0.10  
(.004 ± .004)  
7343–43  
2.4 (.094) 1.3 (.051)  
4.1 (.161) 1.3 (.051)  
0.5 (.020)  
0.5 (.020)  
1.7 (.067)  
n/a  
1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)  
n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)  
X
(0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012)  
7.3 ±0.3 6.0±0.3 3.6 ±0.2  
(0.287 ±0.012) (0.236 ±0.012) (0.142 ±0.008)  
0.10 ± 0.10  
(.004 ± .004)  
7360–38  
E
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low profile cases do not have a bevel or a notch.  
* MIL–C–55365/8 specified dimensions  
47  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade  
Table 1 – Ratings & Part Number Reference  
Rated Rated Case Code/  
KEMET Part  
Number  
DC  
Leakage  
Maximum Allowable  
Ripple Current  
Moisture  
Sensitivity  
DF  
ESR  
Voltage Cap  
Case Size  
% @ +20ºC mΩ @ +20ºC  
(See below for  
part options)  
µA @ +20ºC  
(mA) 100 kHz (mA) 100 kHz (mA) 100 kHz  
Temperature  
V
µF  
KEMET/EIA  
120 Hz  
100 kHz  
Maximum/5 Min  
+25ºC  
3.9  
+85ºC  
3.5  
+125ºC  
1.5  
≤ 260ºC  
Maximum  
Maximum  
4
1000  
680  
X/7343-43  
E/7360-38  
X/7343-43  
T510X108(1)004C(2)(3)1(4)  
T510E687(1)006C(2)(3)1(4)  
T510X337(1)010C(2)(3)1(4)  
40  
40.8  
33  
6
6
6
18  
23  
35  
1
1
1
6.3  
10  
3.5  
3.2  
1.4  
330  
2.8  
2.5  
1.1  
(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.  
(2) To complete KEMET part number, insert C = Hot Solder Dipped, H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.  
(3) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before  
Weibull or 65 = Both. Designates Surge current option.  
(4) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more  
information.  
(Refer to Ordering Information for additional detail.  
48  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade  
Recommended Voltage Derating Guidelines  
120%  
-55°C to 85°C  
85°C to 125°C  
% Change in Working DC  
Voltage with Temperature  
Recommended Maximum  
Application Voltage  
100%  
80%  
60%  
40%  
20%  
0%  
VR  
67% of VR  
50% of VR  
33% of VR  
% Change in Working DC Voltage  
with Temperature  
67%  
33%  
Recommended Maximum  
Application Voltage (As %  
of Rated Voltage)  
-55  
25  
85  
125  
Temperature (ºC)  
Ripple Current/Ripple Voltage  
Permissible AC ripple voltage and current are related to equivalent  
series resistance (ESR) and the power dissipation capabilities of  
the device. Permissible AC ripple voltage which may be applied is  
limited by two criteria:  
1. The positive peak AC voltage plus the DC bias voltage, if any,  
must not exceed the DC voltage rating of the capacitor.  
2. The negative peak AC voltage in combination with bias  
voltage, if any, must not exceed the allowable limits specified for  
reverse voltage. See the Reverse Voltage section for allowable  
limits.  
Maximum Power  
Dissipation (P max)  
mWatts @ 25°C  
w/+20°C Rise  
270  
KEMET Series  
and Case Code  
EIA  
Case Code  
T510X  
T510E  
7343–43  
7360–38  
285  
The maximum power dissipation rating must be reduced with increasing  
environmental operating temperatures. Refer to the Temperature  
Compensation Multiplier table for details.  
The maximum power dissipation by case size can be determined  
using the table at right. The maximum power dissipation rating  
stated in the table must be reduced with increasing environmental  
operating temperatures. Refer to the table below for temperature  
compensation requirements.  
Temperature Compensation Multipliers  
for Maximum Ripple Current  
T ≤ 25°C  
T ≤ 85°C  
T ≤ 125°C  
1.00  
0.90  
0.40  
T= Environmental Temperature  
Using the P max of the device, the maximum allowable rms ripple  
current or voltage may be determined.  
I(max) = √P max/R  
E(max) = Z √P max/R  
I = rms ripple current (amperes)  
E = rms ripple voltage (volts)  
R = ESR at specified frequency (ohms)  
Z = Impedance at specified frequency (ohms)  
P max = maximum power dissipation (watts)  
49  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade  
Reverse Voltage  
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The  
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse  
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within  
these limits.  
Temperature  
Permissible Transient Reverse Voltage  
25°C  
85°C  
15% of Rated Voltage  
5% of Rated Voltage  
1% of Rated Voltage  
125°C  
Table 2 – Land Dimensions/Courtyard  
Metric  
Size  
Code  
Density Level A:  
Maximum (Most) Land  
Protrusion (mm)  
Density Level B:  
Median (Nominal) Land  
Protrusion (mm)  
Density Level C:  
Minimum (Least) Land  
Protrusion (mm)  
KEMET  
Case  
EIA  
W
L
S
V1  
V2  
W
L
S
V1  
V2  
W
L
S
V1  
V2  
E¹  
7360–38  
4.25  
2.77  
3.67  
10.22  
7.30  
4.13  
2.37  
3.87  
9.12  
6.80  
4.03  
1.99  
4.03  
8.26  
6.54  
X¹  
7343–43  
2.55  
2.77  
3.67  
10.22  
5.60  
2.43  
2.37  
3.87  
9.12  
5.10  
2.33  
1.99  
4.03  
8.26  
4.84  
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder  
processes.  
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.  
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification  
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).  
¹ Height of these chips may create problems in wave soldering.  
V1  
L
L
V2  
W
W
S
Grid Placement Courtyard  
50  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade  
Soldering Process  
KEMET’s families of surface mount capacitors are compatible  
Profile Feature  
SnPb Assembly Pb-Free Assembly  
with wave (single or dual), convection, IR, or vapor phase reflow  
Preheat/Soak  
techniques. Preheating of these components is recommended  
to avoid extreme thermal stress. KEMET's recommended profile  
Temperature Minimum (TSmin  
)
100°C  
150°C  
150°C  
200°C  
Temperature Maximum (TSmax  
)
conditions for convection and IR reflow reflect the profile conditions  
of the IPC/J–STD–020D standard for moisture sensitivity testing.  
The devices can safely withstand a maximum of three reflow  
passes at these conditions.  
Time (ts) from Tsmin to Tsmax  
)
60 – 120 seconds  
3°C/seconds maximum  
183°C  
60 – 120 seconds  
3°C/seconds maximum  
217°C  
Ramp-up Rate (TL to TP)  
Liquidous Temperature (TL)  
Time Above Liquidous (tL)  
60 – 150 seconds  
60 – 150 seconds  
220°C*  
235°C**  
250°C*  
260°C**  
Peak Temperature (TP)  
Please note that although the X/7343–43 case size can withstand  
wave soldering, the tall profile (4.3 mm maximum) dictates care in  
wave process development.  
Time within 5°C of Maximum  
20 seconds maximum  
6°C/seconds maximum  
6 minutes maximum  
30 seconds maximum  
6°C/seconds maximum  
8 minutes maximum  
Peak Temperature (tP)  
Ramp-down Rate (TP to TL)  
Time 25°C to Peak Temperature  
Hand soldering should be performed with care due to the difficulty  
in process control. If performed, care should be taken to avoid  
contact of the soldering iron to the molded case. The iron should  
be used to heat the solder pad, applying solder between the pad  
and the termination, until reflow occurs. Once reflow occurs, the  
iron should be removed immediately. “Wiping” the edges of a chip  
and heating the top surface is not recommended.  
Note: All temperatures refer to the center of the package, measured on the  
package body surface that is facing up during assembly reflow.  
*Case Size D, E, P, Y, and X  
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z  
TP  
tP  
Maximum Ramp Up Rate = 3ºC/seconds  
Maximum Ramp Down Rate = 6ºC/seconds  
TL  
tL  
During typical reflow operations, a slight darkening of the gold-  
colored epoxy may be observed. This slight darkening is normal  
and not harmful to the product. Marking permanency is not  
affected by this change.  
T
smax  
T
smin  
tS  
25  
25ºC to Peak  
Time  
Storage  
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other  
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term  
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may  
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%  
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of  
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years  
of receipt.  
51  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors  
Low ESR MnO2 Tantalum Surface Mount Capacitors – T510 Series Multiple Anode Low ESR Space Grade  
Construction  
Polarity Strip
Molded Epoxy  
Case  
Detailed Cross Section  
Silver Paint  
(Fourth Layer)  
Polarit
Bevel (
Tantalum Wire  
Leadframe  
(- Cathode)  
Washer  
T
Weld  
(to attach wire)  
Carbon  
(Third Layer)  
Washer  
Silver Adhesive  
MnO2  
(Second Layer)  
Ta2O5 Dielectric  
(First Layer)  
Leadframe  
(+ Anode)  
Molded Epoxy  
Case  
Tantalum  
Capacitor Marking  
Date Code *  
1st digit = Last number of Year  
KEMET  
Multi-Anode  
Space Grade  
MnO2  
9 = 2009  
0 = 2010  
1 = 2011  
2 = 2012  
3 = 2013  
4 = 2014  
Polarity  
Indicator (+)  
Picofarad  
Code  
2nd and 3rd digit = Week of the Year  
01 = 1st week of the Year to  
52 = 52nd week of the Year  
KEMET  
ID  
Rated  
Voltage  
Date  
Code*  
* 230 = 30th week of 2012  
52  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors – Space Grade  
Tape & Reel Packaging Information  
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in  
accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging  
system is compatible with all tape-fed automatic pick-and-place systems.  
8 mm (0.315")  
or  
12 mm (0.472")  
180 mm (7.0")  
Top Tape Thickness  
or  
0.10 mm (0.004")  
330 mm (13.0")  
Maximum Thickness  
Table 3 – Packaging Quantity  
Tape Width  
Case Code  
7" Reel*  
13" Reel*  
(mm)  
KEMET  
EIA  
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
3216-12  
3528-12  
3528-15  
6032-15  
6032-19  
7343-15  
7343-17  
7343-20  
3216-18  
3528-21  
6032-28  
7343-31  
7343-12  
7343-40  
7343-43  
7360-38  
7360-20  
8
8
8
12  
12  
12  
12  
12  
8
2,500  
2,500  
2,000  
1,000  
1,000  
1,000  
1,000  
1,000  
2,000  
2,000  
500  
500  
1,000  
500  
500  
500  
10,000  
10,000  
8,000  
5,000  
5,000  
3,000  
3,000  
3,000  
9,000  
8,000  
3,000  
2,500  
3,000  
2,000  
2,000  
2,000  
2,500  
8
12  
12  
12  
12  
12  
12  
12  
X
E/T428P  
H
1,000  
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.  
53  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors – Space Grade  
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions  
T
T
P2  
[10 pitches cumulative  
tolerance on tape ± 0.2 mm]  
2
E
1
Po  
ØDo  
Ao  
F
Ko  
W
E
2
B
1
Bo  
S
1
P
1
T
1
Embossment  
For cavity size,  
see Note 1 Table 4  
Center Lines of Cavity  
ØD  
1
Cover Tape  
is for tape feeder reference only,  
including draft concentric about B  
B
1
o
.
User Direction of Unreeling  
Table 4 – Embossed (Plastic) Carrier Tape Dimensions  
Metric will govern  
Constant Dimensions — Millimeters (Inches)  
D1 Minimum  
Note 1  
1.0  
R Reference S1 Minimum  
Tape Size  
D0  
E1  
P0  
P2  
T Maximum T1 Maximum  
Note 2  
25.0  
Note 3  
8 mm  
12 mm  
16 mm  
2.0 ±0.05  
(0.079 ±0.002)  
(0.039)  
(0.984)  
1.5 +0.10/-0.0  
(0.059 +0.004/-0.0)  
1.75 ±0.10  
(0.069 ±0.004) (0.157 ±0.004)  
4.0 ±0.10  
0.600  
0.600  
0.100  
1.5  
(0.059)  
30  
(0.024)  
(0.024)  
(0.004)  
2.0 ±0.1  
(0.079 ±0.059)  
(1.181)  
Variable Dimensions — Millimeters (Inches)  
B1 Maximum  
Note 4  
4.35  
Tape Size  
8 mm  
Pitch  
E2 Minimum  
F
P1  
T2 Maximum W Maximum A0, B0 & K0  
6.25  
(0.246)  
3.5 ±0.05  
2.0 ±0.05 or 4.0 ±0.10  
2.5  
8.3  
Single (4 mm)  
(0.171)  
(0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004)  
(0.098)  
(0.327)  
2.0 ±0.05 (0.079 ±0.002) or 4.0  
Single (4 mm) &  
Double (8 mm)  
8.2  
(0.323)  
10.25  
(0.404)  
5.5 ±0.05  
4.6  
(0.181)  
12.3  
(0.484)  
12 mm  
16 mm  
±0.10 (0.157 ±0.004) or 8.0 ±0.10  
(0.217 ±0.002)  
Note 5  
(0.315 ±0.004)  
12.1  
(0.476)  
14.25  
(0.561)  
7.5±0.10  
(0.295 ±0.004)  
4.0 ±0.10 (0.157 ±0.004) to 12.0  
16.3  
(0.642)  
Triple (12 mm)  
8.0 (0.315)  
±0.10 (0.472 ±0.004)  
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and  
hole location shall be applied independent of each other.  
2. The tape, with or without components, shall pass around R without damage (see Figure 4).  
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).  
4. B1 dimension is a reference dimension for tape feeder clearance only.  
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:  
(a) the component does not protrude above the top surface of the carrier tape.  
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.  
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).  
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).  
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.  
54  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors – Space Grade  
Packaging Information Performance Notes  
1. Cover Tape Break Force: 1.0 Kg minimum.  
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:  
Tape Width  
8 mm  
Peel Strength  
0.1 to 1.0 Newton (10 to 100 gf)  
0.1 to 1.3 Newton (10 to 130 gf)  
12 and 16 mm  
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°  
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.  
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA  
Standards 556 and 624.  
Figure 2 – Maximum Component Rotation  
°
T
Maximum Component Rotation  
Top View  
Maximum Component Rotation  
Side View  
Typical Pocket Centerline  
Tape  
Maximum  
°
°
T
s
Width (mm) Rotation (  
)
8,12  
16 – 200  
20  
10  
Bo  
Tape  
Maximum  
°
S
Width (mm) Rotation (  
)
8,12  
16 – 56  
72 – 200  
20  
10  
5
Typical Component Centerline  
Ao  
Figure 4 – Bending Radius  
Figure 3 – Maximum Lateral Movement  
Embossed  
Carrier  
Punched  
Carrier  
8 mm & 12 mm Tape  
16 mm Tape  
0.5 mm maximum  
0.5 mm maximum  
1.0 mm maximum  
1.0 mm maximum  
R
Bending  
Radius  
R
55  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors – Space Grade  
Figure 5 – Reel Dimensions  
Full Radius,  
See Note  
W3 (Includes  
flange distortion  
at outer edge)  
Access Hole at  
Slot Location  
(Ø 40 mm minimum)  
W
2 (Measured at hub)  
D
(See Note)  
A
N
C
(Arbor hole  
W
1 (Measured at hub)  
diameter)  
If present,  
tape slot in core  
for tape start:  
2.5 mm minimum width x  
10.0 mm minimum depth  
B
(see Note)  
Note: Drive spokes optional; if used, dimensions B and D shall apply.  
Table 5 – Reel Dimensions  
Metric will govern  
Constant Dimensions — Millimeters (Inches)  
Tape Size  
8 mm  
A
B Minimum  
C
D Minimum  
178 ±0.20  
(7.008 ±0.008)  
or  
330 ±0.20  
(13.000 ±0.008)  
1.5  
(0.059)  
13.0 +0.5/-0.2  
(0.521 +0.02/-0.008)  
20.2  
(0.795)  
12 mm  
16 mm  
Variable Dimensions — Millimeters (Inches)  
Tape Size  
8 mm  
N Minimum  
W1  
W2 Maximum  
W3  
8.4 +1.5/-0.0  
(0.331 +0.059/-0.0)  
12.4 +2.0/-0.0  
(0.488 +0.078/-0.0)  
16.4 +2.0/-0.0  
14.4  
(0.567)  
18.4  
(0.724)  
22.4  
50  
(1.969)  
Shall accommodate tape width  
without interference  
12 mm  
16 mm  
(0.646 +0.078/-0.0)  
(0.882)  
56  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors – Space Grade  
Figure 6 – Tape Leader & Trailer Dimensions  
Embossed Carrier  
Carrier Tape  
Round Sprocket Holes  
Punched Carrier  
8 mm & 12 mm only  
START  
END  
Top Cover Tape  
Elongated Sprocket Holes  
(32 mm tape and wider)  
100 mm  
Minimum Leader  
400 mm Minimum  
Trailer  
160 mm Minimum  
Components  
Top Cover Tape  
Figure 7 – Maximum Camber  
Elongated sprocket holes  
(32 mm & wider tapes)  
Carrier Tape  
Round Sprocket Holes  
1 mm Maximum, either direction  
Straight Edge  
250 mm  
57  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors – Space Grade  
KEMET Corporation  
World Headquarters  
Europe  
Asia  
Southern Europe  
Paris, France  
Tel: 33-1-4646-1006  
Northeast Asia  
Hong Kong  
Tel: 852-2305-1168  
2835 KEMET Way  
Simpsonville, SC 29681  
Sasso Marconi, Italy  
Tel: 39-051-939111  
Shenzhen, China  
Tel: 86-755-2518-1306  
Mailing Address:  
P.O. Box 5928  
Greenville, SC 29606  
Beijing, China  
Central Europe  
Landsberg, Germany  
Tel: 49-8191-3350800  
Tel: 86-10-5829-1711  
www.kemet.com  
Tel: 864-963-6300  
Fax: 864-963-6521  
Shanghai, China  
Tel: 86-21-6447-0707  
Kamen, Germany  
Tel: 49-2307-438110  
Corporate Offices  
Fort Lauderdale, FL  
Tel: 954-766-2800  
Taipei, Taiwan  
Tel: 886-2-27528585  
Northern Europe  
Bishop’s Stortford, United Kingdom  
Tel: 44-1279-460122  
North America  
Southeast Asia  
Singapore  
Southeast  
Tel: 65-6586-1900  
Lake Mary, FL  
Tel: 407-855-8886  
Espoo, Finland  
Tel: 358-9-5406-5000  
Penang, Malaysia  
Tel: 60-4-6430200  
Northeast  
Wilmington, MA  
Tel: 978-658-1663  
Bangalore, India  
Tel: 91-806-53-76817  
Central  
Novi, MI  
Tel: 248-306-9353  
West  
Milpitas, CA  
Tel: 408-433-9950  
Mexico  
Guadalajara, Jalisco  
Tel: 52-33-3123-2141  
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not  
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of  
KEMET Electronics Corporation.  
58  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Tantalum Surface Mount Capacitors – Space Grade  
Disclaimer  
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and  
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.  
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.  
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are  
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only  
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise  
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.  
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still  
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective  
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.  
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not  
be required.  
59  
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com  
TC111_SPACE • 4/14/2014  
Corporate Office  
KEMET Corporation  
2835 KEMET Way  
Simpsonville, SC 29681  
USA  
Tel: 864.963.6300  
Fax: 864.963.6521  
www.kemet.com  
Electronic Components  
One world. One KEMET.  

相关型号：

T496D227K004CH631A

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CH631B

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CH631C

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CH641A

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CH641B

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CH641C

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CH651A

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CH651B

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CH651C

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CT611A

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CT611B

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET

T496D227K004CT611C

 Tantalum Surface Mount Capacitors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
KEMET
©2020 ICPDF网 联系我们和版权申明